advertisement
8903, 8904, and 8908
Spinner
®
C
B
A
D
8 7
Please read before use.
6
F
E
Register your product at: http://www.mytee.
com/support/register/
8 7
5
4
3
REV.
OD
2
REVISIONS
DESCRIPTION
ORIGINAL DRAFT
8
DATE
1
APPROVED
JFL
7
F
F
E
E
6 5
D
D
C
C
E
F
8
4
B
7 6 5 4
UNLESS OTHERWISE SPECIFIED:
DRAWN
CHECKED
COMMENTS:
NAME
V. LaBarbera
ONE PLACE DECIMAL .03
THREE PLACE DECIMAL .003
MATERIAL
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
MYTEE PRODUCTS, INC. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
PROHIBITED.
FINISH
A
3 2
DATE
2/5/10 mytee
PRODUCTS, INC.
TITLE: spinner, 12"
SIZE
C
SCALE: 1:12 DO NOT
SCALE DRAWING
1
SHEET 1 OF 1
A
B
8 7
3 2
8904 - T-Handle
5 6
1
F
E
4
4 3
REV.
OD
2
REVISIONS
DESCRIPTION
ORIGINAL DRAFT
DATE
1
APPROVED
JFL
F
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
MYTEE PRODUCTS, INC. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
PROHIBITED.
FINISH
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHES
TOLERANCES:
ANGULAR: MACH .5
ONE PLACE DECIMAL .03
TWO PLACE DECIMAL .05
THREE PLACE DECIMAL .003
MATERIAL
DRAWN
CHECKED
COMMENTS:
NAME
V. LaBarbera
3 2
DATE
2/5/10 mytee
PRODUCTS, INC.
858-679-1191
TITLE:
SCALE: 1:12 DO NOT
SCALE DRAWING
1
REV
D
SHEET 1 OF 1
E
D
C
B
D D
C C
B
A
8 7
8908 - Counter Spinner®
4 6 5
3
B
DRAWN
CHECKED
NAME
M.LaBarbera
2
DATE
3/2013
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
MYTEE PRODUCTS, INC. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
MYTEE PRODUCTS, INC. IS
PROHIBITED.
mytee
TITLE:
Spinner, Counter
SIZE DWG. NO.
C
SCALE: 1:4
8908
DO NOT
SCALE DRAWING
1
REV
B
SHEET 1 OF 1
A
Model #
Serial #
Form # ADP-SPIN
3-17
13655 Stowe Dr., Poway, CA 92064
1
GENERAL INFORMATION
Dear Customer:
Congratulations on the purchase of your new Spinner
®
. As you are already aware, the scene of the equipment world is becoming more high tech, and we at Mytee Products Inc. strive to keep you on the cutting edge with superior quality and technology.
Keep in mind that the Spinner
® is a machine, so neglect or abuse will cause unnecessary damage and void the warranty. However with simple maintenance the Spinner
®
will give quality performance for many years to come.
If warranty questions arise, please consult your user manual or get in touch with your distributor. If you have questions about maintenance, replacing parts or ordering parts, please call an authorized Mytee Products Inc. Service Center.
To see an updated list, visit our website at www.mytee.com
Before you begin cleaning, please read your manual thoroughly.
Sincerely,
Mytee Customer Care Dept.
Parts and Service
Repairs, when required, should be performed by Mytee service personnel or Mytee authorized Service Center using Mytee original replacement parts and accessories.
Call Mytee for repair parts or service. Please specify the Model and Serial Number when discussing your machine.
Name Plate
The Model and Serial Number of your machine are shown on the Nameplate on the back panel of the machine. This information is needed when ordering repair parts for the machine. Use the space provided on the front cover to note the Model and
Serial Number of your machine for future reference.
Unpacking the Machine
When the machine is delivered, carefully inspect the shipping carton and the machine for damage. If damage is evident, save the shipping carton so that it can be inspected by the carrier that delivered it. Contact the carrier immediately to file a freight damage claim.
Caution and Warnings
Symbols
Mytee uses the symbols below to signal potentially dangerous conditions. Always read this information carefully and take the necessary steps to protect personnel and property.
Is used to warn of immediate hazards that will cause severe personal injury or death.
Is used to call attention to a situation that could cause severe personal injury.
Is used to call attention to a situation that could cause minor personal injury or damage to the machine or other property. When using an electrical appliance, basic precautions should always be followed, including the following: Read all instructions before using this machine. This product is intended for commercial use only.
To reduce the risk of fire, electrical shock, or injury:
1. Read all instructions before using equipment.
2. Use only as described in this manual. Use only manufacturer’s recommended attachments.
3. Always unplug or disconnect the appliance from power supply when not in use.
4. Do not allow to be used as a toy. Close attention is necessary when used by or near children.
5. Do not use in areas where flammable or combustible material may be present.
6. Do not leave the unit exposed to harsh weather elements. Temperatures below freezing may damage components and void warranty.
7. Use only the appropriate handles to move and lift unit. Do not use any other parts of this machine for this purpose.
8. Keep hair, loose clothing, fingers, and all parts of the body away from all openings and moving parts.
9. Use extra care when cleaning on stairs.
10. When cleaning and servicing the machine, local or national regulations may apply to the safe disposal of liquids which may contain: chemicals, grease, oil, acid, alkalines, or other dangerous liquids.
11. Do not leave operating unattended.
Use only non-flammable liquid in this machine.
Preparation
1. Remove furniture from cleaning area, and sweep or vacuum.
2. Protect cabinets, carpets, walls and painted surfaces from spray with drop cloths or plastic.
3. Identification – Identify the type of floor you are going to clean. This step is vital, since each flooring type may call for different chemicals, brushes and equipment.
Basic flooring types are: resilient (vinyl, VCT, linoleum), which is generally softer; stone (terrazzo, quarry, ceramic, brick, concrete) made of natural materials; and stone substitute (marble, slate and granite), which mimics stone.
4. Application – Once the flooring is identified, apply the appropriate type of cleaning
(or in the case of resilient flooring, stripping) chemical. On tile surfaces, spray chemical evenly over tile and grout lines, allowing it to pool in the lines.
5. Emulsification – Chemicals typically require dwell time to remove the dirt and grime driven into the surface. The dirtier the floor, the longer the chemicals may need to dwell. Without proper dwell time, chemicals will not be effective.
6. Agitation and Elimination – Agitate the chemical into the floor to facilitate cleaning using a Spinner® floor machine connected to an extractor. The Spinner® lays down high-pressure spray to agitate and rinse, and vacuums up the solution simultaneously, eliminating it from the surface.
Spinner
®
Operation
1. Attach the Vacuum and Solution Hoses to the extractor.
2. Attach the Solution Hose to the Male Quick Disconnect and the Vacuum Hose to the Wand Tube.
3. Turn on the extractor to engage the vacuum, while making sure the bottom of the
Spinner™ is flush with the cleaning surface to ensure proper suction.
4. Squeeze the Spinner’s™ high-pressure trigger gun to dispense solution on to the surface.
5. Hold the machine at waist level and use a back-and-forth motion.
After Use
1. Unplug.
2. Inspect hoses and replaced if damaged.
3. After each use, wipe floor machine with a clean, soft, damp cloth.
4. Do not expose to rain.
5. Store indoors. In a clean, dry place.
6. Do not store sitting on brush.
Maintenance Schedule
Maintenance item Daily Once a week
Clean and inspect hoses
Check for loose hardware
Clean machine with clean, soft damp cloth
Inspect spray jets once a week.
Use Mytee
®
System Maintainer 3601 every 100 hours. Circulate through the hose and tool.
Product Specifications
x x x x x
Spinner® Style
8903
1.5” Wand Style
8904
1.5”
T-Handle
8908
Counter Spinner
Tube Construction
Stainless steel
12”
1.5” Vacuum
Hose
7.5”
Cleaning Path
PSI Requirements
Spray Jets
Product Weight
Product
Dimensions
18 lbs.
12” x 14” x 52”
500 - 3,000 PSI
Dual 1502
16 lbs.
16” x 19” x 49”
7 lbs.
11” x 9” x 9”
2
GENERAL INFORMATION
FAQs
Q – How much PSI do I need to operate the Spinner
®
A – Spinners
®
require between 500 and 3,000 PSI.
?
Troubleshooting
The Spinner
®
is not spinning.
1. Inspect the jets to make sure they are not clogged.
2. Check the machine for a normal flow of solution by disconnecting the Solution
Hose from the Spinner
®
and letting the liquid run freely.
3. If the solution’s flow is disrupted, use Mytee
®
System Maintainer 3601.
4. Try to spin the unit by hand. If it does not move, replace the swivel. If it moves, the seal may need rebuilding. Take the Spinner
®
to your local service center.
Guidelines
1. For ease of use, keep the brush and manifold balanced and flat.
2. Adjust the handle at a comfortable height for the operator; making sure the brush remains balanced before starting the extractor.
3. The Spinner
®
operates differently according to the surface. Smooth surfaces offer more resistance than surfaces such as tile and grout. If you experience resistance of movement, adjust the vacuum release slot to release air from the Vacuum Hose.
Replacement Parts
8903, and 8904
Brush & Glide Kit – No. A109
Glide – No. P500
Brush – No. G098
Swivel – No. H926
Rebuild Kit – No. H927
8908
Glide – No. P593
Brush – No. G111
Swivel – No. H926
Rebuild Kit – No. H927
3
F
E
D
C
B
A
8
8 7
7
6 5
4 3
REV.
OD
2
REVISIONS
DESCRIPTION
ORIGINAL DRAFT
DATE
1
APPROVED
JFL
F
6 5
B
A
F
E
D
C
8
8903 WAND HANDLE, 1.5” TUBE SPINNER®
7 6 5 4 3
REV.
OD
2
REVISIONS
DESCRIPTION
ORIGINAL DRAFT
8901 FRONT
1
DATE
1
APPROVED
JFL
2
5
3
4
E
D
Attach solution line here.
Adapter for use with 2” vacuum hoses.
Attach vacuum hose here.
C
6
8
B
7 6
1. Quick disconnect
5
2. High-pressure gun
3. Vacuum hose connection
4. Vac relief
7
8
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHES
TOLERANCES:
ANGULAR: MACH .5
ONE PLACE DECIMAL .03
DRAWN
CHECKED
COMMENTS:
NAME
V. LaBarbera
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
MYTEE PRODUCTS, INC. ANY
REPRODUCTION IN PART OR AS A WHOLE
MATERIAL
FINISH
MYTEE PRODUCTS, INC. IS
PROHIBITED.
4
5. Wand grip handle
3
6. Hi-pressure solution hose
7. 12” Spinner® head
8. Nylon glide with removeable brush
2
DATE
2/5/10 mytee
PRODUCTS, INC.
858-679-1191
TITLE: spinner, 12"
A
C
SCALE: 1:12
REV
D
SHEET 1 OF 1
1
After the Vacuum Hose and Solution Hose are attached to the extractor, connect the Solution Hose to the Male Quick Disconnect, and the Vacuum Hose to wand tube.
Use the included adapter if you are using a 2” vacuum hose. You can permanently attach the adapter using silicone or similar adhesive.
JETS
8 7 6 5
USE
4 3
REV.
OD
2
REVISIONS
DESCRIPTION
ORIGINAL DRAFT
1
DATE APPROVED
JFL
F
F
E E
D D
C
B
After the extractor is turned on and vacuum is engaged, squeeze the High-Pressure Trigger Gun. Liquid flows through the Solution Hose and activates the Spinner Bar.
A
8 7 6 5
PROPRIETARY AND CONFIDENTIAL
MYTEE PRODUCTS, INC. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
PROHIBITED.
FINISH
3
UNLESS OTHERWISE SPECIFIED:
ANGULAR: MACH .5
ONE PLACE DECIMAL .03
THREE PLACE DECIMAL .003
MATERIAL
DRAWN
CHECKED
COMMENTS:
NAME
V. LaBarbera
DATE
2/5/10 mytee
PRODUCTS, INC.
TITLE: spinner, 12"
2
SIZE DWG. NO.
C
SCALE: 1:12
8903
DO NOT
SCALE DRAWING
1
REV
D
SHEET 1 OF 1
A
4
Hold the machine at waist level and use a back-and-forth motion.
B
C
4
4
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHES
TOLERANCES:
DRAWN
CHECKED
COMMENTS:
NAME
V. LaBarbera
ANGULAR: MACH .5
ONE PLACE DECIMAL .03
TWO PLACE DECIMAL .05
THREE PLACE DECIMAL .003
MATERIAL
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
MYTEE PRODUCTS, INC. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
MYTEE PRODUCTS, INC. IS
PROHIBITED.
FINISH
3 2
DATE
2/5/10
mytee
PRODUCTS, INC.
858-679-1191
TITLE:
SIZE DWG. NO.
C
SCALE: 1:12
8901
DO NOT
SCALE DRAWING
1
REV
D
SHEET 1 OF 1
B
D
C
E
8903 WAND HANDLE, 1.5” TUBE SPINNER®
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF MYTEE PRODUCTS, INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF MYTEE PRODUCTS, INC. IS PROHIBITED.
ITEM NO.
5
Part prices are subject to change.
C
B
A
F
E
D
8
8 7
7
6 5
4 3
REV.
OD
2
REVISIONS
DESCRIPTION
ORIGINAL DRAFT
DATE
1
APPROVED
JFL
F
6 5
8904 “T” HANDLE, 1.5” TUBE SPINNER®
F
E
D
8 7
4
6
3
8904 FRONT
5
1
2
4 3
REV.
OD
2
REVISIONS
DESCRIPTION
ORIGINAL DRAFT
VACUUM HOSE AND SOLUTION HOSE ATTACHMENT
1
Attach solution line here.
F
Adapter for use with 2” vacuum hoses.
Attach vacuum hose here.
C
B
A
C
8
5
B
6
7
1. Quick disconnect
7 6
2. High-pressure gun
3. Vacuum hose connection
4. Vac relief
5
UNLESS OTHERWISE SPECIFIED:
ANGULAR: MACH .5
ONE PLACE DECIMAL .03
DRAWN
CHECKED
COMMENTS:
NAME
V. LaBarbera
DATE
2/5/10 mytee
PRODUCTS, INC.
TITLE:
MATERIAL
PROPRIETARY AND CONFIDENTIAL
4
DRAWING IS THE SOLE PROPERTY OF
MYTEE PRODUCTS, INC. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
MYTEE PRODUCTS, INC. IS
PROHIBITED.
3
FINISH
5. Hi-pressure solution hose
6. 12” Spinner® head
7. Nylon glide with removeable brush
2
8
SIZE
C
DWG. NO.
After the Vacuum Hose and Solution Hose are attached to the
1
REV
D
SHEET 1 OF 1 extractor, connect the Solution Hose to the Male Quick Disconnect, and the Vacuum Hose to wand tube. Use the included adapter if you are using a 2” vacuum hose. You can permanently attach the adapter using silicone or similar adhesive.
4
F
JETS
USE
3
REV.
OD
2
DESCRIPTION
ORIGINAL DRAFT
REVISIONS
DATE
1
APPROVED
JFL
F
E E
D D
C C
B
B
After the extractor is turned on and vacuum is engaged, squeeze the High-Pressure Trigger Gun. Liquid flows through the Solution Hose and activates the Spinner Bar.
A
8
Hold the machine at waist level and use side to side.
7 6 5 4
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHES
TOLERANCES:
ANGULAR: MACH .5
ONE PLACE DECIMAL .03
TWO PLACE DECIMAL .05
THREE PLACE DECIMAL .003
MATERIAL
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
MYTEE PRODUCTS, INC. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
MYTEE PRODUCTS, INC. IS
PROHIBITED.
FINISH
DRAWN
CHECKED
COMMENTS:
NAME
V. LaBarbera
3 2
DATE
2/5/10 mytee
PRODUCTS, INC.
858-679-1191
TITLE:
SIZE DWG. NO.
C
SCALE: 1:12
8904
1
REV
D
SHEET 1 OF 1
4
6
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHES
TOLERANCES:
DRAWN
CHECKED
COMMENTS:
NAME
V. LaBarbera
ANGULAR: MACH .5
ONE PLACE DECIMAL .03
TWO PLACE DECIMAL .05
THREE PLACE DECIMAL .003
MATERIAL
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
MYTEE PRODUCTS, INC. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
MYTEE PRODUCTS, INC. IS
PROHIBITED.
FINISH
3 2
DATE
2/5/10
mytee
PRODUCTS, INC.
858-679-1191
TITLE:
SIZE DWG. NO.
C
SCALE: 1:12
8901
DO NOT
SCALE DRAWING
1
REV
D
SHEET 1 OF 1
B
D
C
E
8904 “T” HANDLE, 1.5” TUBE SPINNER®
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF MYTEE PRODUCTS, INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF MYTEE PRODUCTS, INC. IS PROHIBITED.
ITEM NO.
7
Part prices are subject to change.
F
E
8
F
E
D
C
D
C
B
A
E
8 7
F
8908 COUNTER SPINNER®
8 7 6 5
4
8908 FRONT
6 5 4 3
3
2
7
6
1
3
7
2 1
F
VACUUM HOSE AND SOLUTION HOSE ATTACHMENT
E
D
Connect solution hose here.
6
C
Connect vacuum hose here.
B
8
4
5
7 6 5 4 3
1. Male quick disconnect
2. Solution hose
3. High-pressure trigger gun
4. Nylon glide
5. 6” Spinner® head
6. Vacuum hose
7. Vacuum hose connection port
DRAWN
CHECKED
NAME
M.LaBarbera
DATE
3/2013
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
REPRODUCTION IN PART OR AS A WHOLE
MYTEE PRODUCTS, INC. IS mytee
TITLE:
Spinner, Counter
SIZE DWG. NO.
C
SCALE: 1:4
8908
DO NOT
SCALE DRAWING
REV
B
SHEET 1 OF 1
2 1
A
After the Vacuum Hose and Solution Hose are attached to the extractor, connect the Solution Hose to the Male Quick Disconnect, and the Vacuum Hose to wand tube.
2
B
JETS USE
5
1
A
8 7 6 5 4 3
DRAWN
CHECKED
NAME
M.LaBarbera
2
DATE
3/2013
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
MYTEE PRODUCTS, INC. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
MYTEE PRODUCTS, INC. IS
PROHIBITED.
mytee
PRODUCTS, INC.
858-679-1191
TITLE:
Spinner, Counter
SIZE
C
DWG. NO.
8908
SCALE: 1:4
DO NOT
SCALE DRAWING
1
REV
B
SHEET 1 OF 1
A
D
C
B
E
F
4
D
After the extractor is turned on and vacuum is engaged, squeeze the High-Pressure Trigger Gun. Liquid flows through the Solution Hose and activates the Spinner Bar.
Use unit on counter top or other hard surface.
8
C
B
3
REV.
OD
2
REVISIONS
DESCRIPTION
ORIGINAL DRAFT
DATE
1
APPROVED
JFL
F
E
D
C
A
8 7 6 5 4
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHES
TOLERANCES:
DRAWN
CHECKED
COMMENTS:
NAME
V. LaBarbera
ANGULAR: MACH .5
ONE PLACE DECIMAL .03
TWO PLACE DECIMAL .05
THREE PLACE DECIMAL .003
MATERIAL
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
MYTEE PRODUCTS, INC. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
MYTEE PRODUCTS, INC. IS
PROHIBITED.
FINISH
3 2
DATE
2/5/10
mytee
PRODUCTS, INC.
858-679-1191
TITLE:
SIZE DWG. NO.
C
SCALE: 1:12
8908
DO NOT
SCALE DRAWING
1
REV
B
SHEET 1 OF 1
B
8908 COUNTER SPINNER®
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF MYTEE PRODUCTS, INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF MYTEE PRODUCTS, INC. IS PROHIBITED.
ITEM NO.
9
Part prices are subject to change.
NOTES
Mytee Products Inc.
13655 Stowe Dr.
Poway, CA 92064 www.mytee.com
FX 858.679.7814
© 2017 Mytee Products Inc.
Printed in the U.S.A.
10
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement