KDC30
Quick Guide
116 Village Blvd, Suite 305, Princeton, NJ 08540 USA
T: + 1-609-256-4700 F: +1-609-228-4373 [email protected] www.koamtac.com
©2020 KOAMTAC, Inc.
QG_KDC30_20201014
KDC30
Quick Guide
Contents
1.
Product Introduction.........................................................................................................................................2
1.1
KDC30 Diagram.........................................................................................................................................2
1.2
How to turn on and off ..............................................................................................................................2
2.
Bluetooth Pairing ..............................................................................................................................................3
3.
Usage ................................................................................................................................................................4
3.1
Using Keyboard Wedge (HID Keyboard) ..................................................................................................4
3.2
Using KTSync – Android/iOS ....................................................................................................................4
3.3
Using KTSync Keyboard – Android ...........................................................................................................5
3.4
Using KTSync Keyboard – iOS .................................................................................................................6
3.5
Using other Developed Applications with SDK – Android/iOS ................................................................7
4.
Product Specifications ......................................................................................................................................8
See Reference Manual for more detailed information.
Visit store.koamtac.com
to purchase additional products and accessories.
QG_KDC30_20201014 p1
KDC30
Quick Guide
Product Introduction
The KDC30 Bluetooth barcode scanner is an ultra-lightweight and compact 2D Imager data collector.
1.1
KDC30 Diagram
1.2
How to turn on and off
Refer to the figure in section 1.1 to locate the SCAN and DOWN buttons. a) Press SCAN and DOWN buttons simultaneously for 3 seconds. b) The KDC will beep when it is turned ON.
See Reference Manual for more detailed information.
Visit store.koamtac.com
to purchase additional products and accessories.
QG_KDC30_20201014 p2
KDC30
Quick Guide
Bluetooth Pairing
Connecting your KDC using Bluetooth is made easy with the below pairing barcodes. If you are unsure which profile is right for you, please visit www.koamtac.com
for more information.
Android, Mac, Windows: HID Normal iOS: HID iOS
SPP & MFi
1. Navigate to the Bluetooth setting on the host PC, Mac, Smartphone, or Tablet.
2. Ensure that Bluetooth is enabled on the host device and searching for devices.
3. Using the KDC, scan the pairing barcode that corresponds to your desired Bluetooth profile. If you are unsure which Bluetooth profile is right for you, please refer to the previous panel.
4. Check the list of available Bluetooth devices on your host device.
5. From the list, select KDC30 listed by serial number in brackets that matches the serial number found on the back side of the KDC30.
6. In HID mode, KDC30 is now ready to use.
7. To complete connection in SPP/MFi mode, launch KTSync or your application and select KDC30.
* The KDC30 will beep when successfully connected.
See Reference Manual for more detailed information.
Visit store.koamtac.com
to purchase additional products and accessories.
QG_KDC30_20201014 p3
Usage
3.1
Using Keyboard Wedge (HID Keyboard)
This option is only available using Bluetooth connection with HID profile.
KDC30
Quick Guide
Once the KDC is paired with the host, open any application with a text field and tap on the text field. Scan any barcode and it will populate in the text field.
3.2
Using KTSync – Android/iOS
You can use KTSync to utilize your KDC alone or with a native application. This is only available using
Bluetooth connection with SPP (Android) or MFi (iOS). a) Download and install KTSync from the Google Play Store or the Apple App Store. b) Open KTSync and tap on the “Connect” option on the bottom left to view a list of available devices.
(Fig. 1) c) From the device list, select your KDC – ensuring that the serial number displayed in brackets matches the serial number on the back of your KDC. (Fig. 2) d) Upon successful connection, KTSync will display “Connected” next to the name of your KDC at the top of the application. (Fig. 3) e) To test your connection, scan any barcode. If the connection is successful, the barcode data will display on the screen. (Fig. 3)
< Fig. 1 > < Fig. 2 > < Fig. 3 >
See Reference Manual for more detailed information.
Visit store.koamtac.com
to purchase additional products and accessories.
QG_KDC30_20201014 p4
KDC30
Quick Guide
3.3
Using KTSync Keyboard – Android
Once your KDC is connected to KTSync, you can use your KDC as a keyboard. a) While KTSync is running in the background, navigate to Settings > Language & Input > Virtual
Keyboard > Manage keyboards b) Tap on “KTSync Keyboard” to enable it. c) Change “KTSync Keyboard” to the default keyboard. (Fig. 4)
To switch back to the previous keyboard, simply change the default keyboard again. Or, when a text field is selected swipe down from the top of the screen to bring up the notification panel. Select ‘choose input method’ and you can select the default keyboard from here. (Fig. 5)
< Fig. 4 > < Fig. 5 >
See Reference Manual for more detailed information.
Visit store.koamtac.com
to purchase additional products and accessories.
QG_KDC30_20201014 p5
KDC30
Quick Guide
3.4
Using KTSync Keyboard – iOS
Once your KDC is connected to KTSync, you can use your KDC as a keyboard. a) Navigate to the iPhone/iPad/iPod Settings > General > Keyboard > Keyboards > Add New Keyboard...
> Select the KTSync keyboard to be added. (Fig. 6) b) Select the KTSync Keyboard and toggle the switch to Allow Full Access. (Fig. 7)
< Fig. 6 > < Fig. 7 > c) Open the application you want to scan into and tap on the screen, so the on-screen keyboard appears. d) Press and hold the globe icon located to the left of the spacebar. e) Select the KTSync Keyboard and begin scanning. (Fig. 8)
< Fig. 8 >
Note: The KDC must be connected to KTSync & the KTSync keyboard must be selected for this to work
See Reference Manual for more detailed information.
Visit store.koamtac.com
to purchase additional products and accessories.
QG_KDC30_20201014 p6
KDC30
Quick Guide
3.5
Using other Developed Applications with SDK – Android/iOS
A Software Development Kit (SDK) for Android and iOS is available to all KOAMTAC customers to ensure smooth development of applications that work seamlessly with a KDC scanner. It’s easy to request the SDK from the
KOAMTAC website: a) On any web browser, open www.koamtac.com
b) Navigate to SUPPORT > Downloads > SDK c) Complete the form and submit it.
After submission, a KOAMTAC representative will reach out regarding next steps for completing the SDK Agreement.
The SDK package will have libraries, documents, a sample application, and its source code.
See Reference Manual for more detailed information.
Visit store.koamtac.com
to purchase additional products and accessories.
QG_KDC30_20201014 p7
KDC30
Quick Guide
Product Specifications
Item
Design
Physical Size
Functionality
Memory
Power
Communication
Barcode Reader
Environment
Regulatory
Conformance
Accessories
Weight
Supporting OS
Keys
Buzzer
LED Indicator
USB Port
RAM
ROM
Barcode Storage
Battery (Standard)
Charging Solution
Charging Time
Bluetooth
USB
2D Imager
# of scans per charge
(1 sec interval)
# of scans per charge
(10 sec interval)
Scan Range
(10mil Code39)
Screen Reading
Postal Codes / OCR
Passport
Drop Spec
IP Rating
Operating Temp.
Storage Temp.
Humidity Spec
LED Safety
Regulatory
7-slot Charging Cradle
Protective Boot
See Reference Manual for more detailed information.
Visit store.koamtac.com
to purchase additional products and accessories.
KDC30
Ultra-Compact Bluetooth Barcode Scanner
1.50” x 3.28” x 0.70”
(38 mm x 83.5 mm x 18 mm)
1.78 oz (50.5 g)
Android / iOS / Mac OS X / Windows
Scan Key, Up Key, Down Key, Delete Key
Yes
1 Tri-color LED (Red / Amber / Green)
1 Swing-out USB Connector
SDRAM 64KB
Internal Flash ROM 256KB
7,500 Barcodes (EAN-13)
650 mAh Lithium-ion
Swing-out USB Connector
4 Hours
V2.1+EDR, Class2, HID/SPP/MFi
USB to Serial (Swing-out USB Type A connector)
Yes
>3,500
>4,500
1.3” to 7.2” (33 to 182 mm)
Yes
Yes / No
4 ft (1.22 m)
IP42
32˚F to 113˚F (0˚C to 45˚C)
4 ˚F to 113 ˚F ( 20 ˚C to 45 ˚C)
5% ~ 85% (non-condensing)
IEC62471:2006
R&TTE, FCC, KC, TELEC, VCCI, RoHS Compliant
Yes
Yes
QG_KDC30_20201014 p8
