vic
KDC100
Quick Guide
116 Village Blvd, Suite 305, Princeton, NJ 08540 USA
T: + 1-609-256-4700 F: +1-609-228-4373 [email protected] www.koamtac.com
©2020 KOAMTAC, Inc.
QG_KDC100_20201014
KDC100
Quick Guide
Contents
1.
Product Introduction.........................................................................................................................................2
1.1
KDC100 Diagram .......................................................................................................................................2
2.
Usage ................................................................................................................................................................2
2.1
Using Keyboard Wedge (HID Keyboard) ..................................................................................................2
2.2
Using KTSync – Windows PC.....................................................................................................................3
3.
Product Specifications ......................................................................................................................................5
See Reference Manual for more detailed information.
Visit store.koamtac.com
to purchase additional products and accessories.
QG_KDC100_20201014 p1
KDC100
Quick Guide
Product Introduction
The KDC100 USB barcode scanner is an ultra-lightweight and compact 1D laser data collector.
1.1
KDC100 Diagram
Usage
2.1
Using Keyboard Wedge (HID Keyboard)
To use the KDC100 as a USB HID keyboard, change the USB mode. a) Navigate through the KDC Menu to USB Config b) Select USB Mode c) Select USB HID d) Save & Exit.
Changing the “USB Mode” option will erase all data in KDC memory, so make sure to back up your data before changing this option.
KTSync may not recognize the KDC if the KDC is in “USB HID” mode.
See Reference Manual for more detailed information.
Visit store.koamtac.com
to purchase additional products and accessories.
QG_KDC100_20201014 p2
KDC100
Quick Guide
2.2
Using KTSync – Windows PC
The KDC automatically connects to a COM port when connected to a PC’s USB port once KDC Windows USB driver is installed on the Windows PC. The COM port assignment can be found in Windows Device Manager.
It is also possible to manually assign the KDC COM port by using the KTSync Connection submenu under the
“File” menu.
If KTSync fails to connect automatically to the KDC, please follow these steps: a) Exit KTSync. b) Check to make sure that you have connected the KDC to a USB port on your PC.
c) Make sure that you are using the cable provided with the KDC. d) Make sure that a COM port is assigned to a KDC in the Windows Device
Manager. e) Restart KTSync.
See Reference Manual for more detailed information.
Visit store.koamtac.com
to purchase additional products and accessories.
QG_KDC100_20201014 p3
KDC100
Quick Guide
From Synchronization Settings, you can set the destination of data. KTSync provides several synchronization options for synchronizing data from your KDC to Windows PC.
When barcode data is uploaded to the Windows PC, you must assign a destination for the data.
Destination of Data options include:
(This option is applied only to Windows XP/Vista/7/8/10) a) File - This option means data will be saved in the assigned filename. You may select a different target directory by clicking the New icon. The default directory is
C:\myData\sn_timestamp.txt. If C:\myData is not exist, you will be prompted to create it before data may be uploaded to a file. b) Active Window - This option means scanned barcode data is sent directly to the active program running on your Windows PC as if the data is being entered directly from a keyboard. c) Microsoft Excel - This option means barcode data is being imported directly into
Microsoft’s Excel. Various parameters may be set when uploading data to Excel. d) Select from Current Running Application – This option enables the user to select a currently running application for data synchronization.
Note:
Data synchronization begins immediately if “Automatically Synchronize after
Connection” is selected. If not selected, data synchronization is started manually by the user.
Users SHOULD NOT operate the PC during the synchronization process. It may interrupt the process causing unreliable results.
For more detail, refer to the Reference Manual , chapter 6 (Synchronization).
See Reference Manual for more detailed information.
Visit store.koamtac.com
to purchase additional products and accessories.
QG_KDC100_20201014 p4
KDC100
Quick Guide
Product Specifications
Physical
Functionality
Memory
Power
Communication
Design
Size
Weight
Supporting OS
Keys
Buzzer
LED Indicator
USB Port
RAM
ROM
Barcode Storage
Battery (Standard)
Charging Solution
Charging Time
Bluetooth
USB
Ultra-Compact Bluetooth Barcode Scanner
1.37” x 2.44” x 0.59”
(35 mm x 62 mm x 15 mm)
1.34 oz (38 g)
Mac OS X / Windows
Scan Key, Up Key, Down Key
Yes
1 Tri-color LED (Red / Amber / Green)
1 Swing-out USB Connector
1 Ultra-mini USB Connector
SDRAM 64KB
Internal Flash ROM 256KB
External Flash ROM 8MB
409,600 Barcodes (EAN-13)
200 mAh Lithium-polymer
Swing-out USB Connector
Ultra-mini USB Connector
2 Hours
No
USB to Serial
(Swing-out USB Type A Connector/
Ultra-mini USB Connector)
Yes
Barcode Reader
1D Laser
# of scans per charge
(1 sec interval)
# of scans per charge
(10 sec interval)
Scan Range
(10mil Code39)
Screen Reading
Postal Codes/OCR Passport
>12,000
>9,000
Laser: 1.97” to 7.48” (50 to 190 mm)
No
No
Environment
Regulatory
Conformance
Accessories
Drop Spec
IP Rating
Operating Temp.
Storage Temp.
Humidity Spec
Laser Safety
LED Safety
Regulatory
7-slot Charging Cradle
Protective Boot
4 ft (1.22 m) with protective boot
IP42
32˚F to 113˚F (0˚C to 45˚C)
4 ˚F to 113 ˚F ( 20 ˚C to 45 ˚C)
5% ~ 85% (non-condensing)
IEC60825/CDRH Class II
N/A
CE, FCC, KC, RoHS Compliant
Yes
Yes
See Reference Manual for more detailed information.
Visit store.koamtac.com
to purchase additional products and accessories.
QG_KDC100_20201014 p5
