

Load the document

  

Setup Guide

Check the included items

Load the documents facedown and the top edge first.

1



Remove the protective material



2

Install Software

IMPORTANT

Do not connect the scanner to the computer before installing the software.



Setup Disc is not included.

Scanning from the Scanner Touch Panel

1

You can scan using pre-configured jobs via the touch panel of the scanner.

CaptureOnTouch must be running on the PC.

Tap (Scan) on the touch panel home screen.

 

1

Click [New One Touch button].



1

Download the software.

https://software.canon-elec.co.jp/ims/r50/

2

Tap the job you want to execute



, and then tap

(Start)



.

Job List 0



01:Scan double-sided

02:Scan single-sided

03:

04:

Start



3

Check the scanned image and click the [Finish] button.

2

Click .

Right-clicking the selected One Touch button allows you to change the name of the button.

3

Assign an One Touch button to a job number.

2

Execute the downloaded software and follow the on-screen instructions.

Troubleshooting Wi-Fi Setup

• Are the SSID and the password entered correctly? The SSID and the password are case sensitive.

• The scanner can only connect to a network that supports 2.4 GHz connections. Make sure the access point that is currently connected supports 2.4 GHz band, or the scanner is connected to the network at 2.4

GHz band.

6T3-0117-01 XXXXXXXX

• Connect the scanner to the same network as the computer and the access point are connected.

• Turn both this scanner and the access point off and back on, and attempt the Wi-Fi connection again.

• When an access point’s stealth function is enabled, it cannot be detected during Wi-Fi setup. Disable the stealth function or use manual setup to enter the correct SSID of the access point.

© CANON ELECTRONICS INC. 2020 PRINTED IN JAPAN

6T3-0117-01.indd 1

Check, delete, and edit images.

Click in the upper right of the screen for the usage details.

The registered job appears on the Job List screen.

Job List 0

01:Scan double-sided

02:Scan single-sided

03:Save to folder

04:

Start

5/15/2020 午前 11:16:46

Scanning Using a Computer (CaptureOnTouch)

 

1

Click [Scan double-sided] or [Scan single-sided].

The scan setting can be changed using .

Also, you can create your own setting button using [New One Touch button].

2

Check the scanned image and click the [Finish] button.

Check, delete, and edit images.

Click in the upper right of the screen for the usage details.

 

1

Select Document Type

2

Select Destination

3

Click [Scan] button

1

3

Hint

Refer to the Help of CaptureOnTouch for details.

2

Click , and select [Help] from the menu to open the Help.

Click [Help] in the menu bar and select [CaptureOnTouch Help].

Support TWAIN Interface

• Compatible with TWAIN application.

• Refer to the TWAIN application manual for details

Help

●

User Manual

Windows : [Start] - [Canon R50] - User Manual

Mac : [Applications] - [R50 User Manual]

●

CaptureOnTouch Help

Windows : Click the CaptureOnTouch icon in the taskbar, and select [Help] from the menu.

Mac : Click [CaptureOnTouch Help] from the [Help] menu while the main screen of CaptureOnTouch is displayed

●

Scanner Driver Help

Open the scanner driver from a TWAIN-compatible application, and click the

[Help] button.

●

Technical support

USA By internet

By phone

: www.usa.canon.com/support

: 1-800-423-2366

Canada By internet

By phone

: www.canon.ca/support

: 1-800-OK-CANON (652-2666)

About wireless communication functions

This device incorporates wireless communication functions. The radio waves used for wireless communication functions can affect medical and other devices, which could cause serious accidents. Do not use the wireless communication functions in the following conditions.

• Do not use the wireless communication functions if you have a heart pacemaker. The radio waves may affect pacemaker operation.

• Do not use the wireless communication functions near persons using medical devices like heart pacemakers. The radio waves may affect pacemaker and similar devices’ operation. Contact the appropriate medical institution before use.

• Do not use the wireless communication functions inside medical institutions such as hospitals, or near electronic medical equipment. The radio waves may affect electronic medical equipment. Consult with any medical institution before using it inside their facilities.

• Do not use the wireless communication functions inside aircraft. The radio waves may affect precision equipment in the aircraft, and could cause a malfunction resulting in serious accident.

• Do not use the wireless communication functions near automatically controlled devices such as fire alarms. The radio waves may affect such devices and could cause a malfunction resulting in accident.

• When using the wireless communication functions, keep this device at least 20 cm from your body.

Trademarks

• Canon and the Canon logo are registered trademarks, of Canon Inc. in the

United States and may also be trademarks or registered trademarks in other countries.

• imageFORMULA is a trademark of CANON ELECTRONICS INC.

• Microsoft, Windows, PowerPoint, and SharePoint are registered trademarks or trademarks of Microsoft Corporation in the United States and other countries.

• Microsoft product screen shot(s) reprinted with permission from Microsoft

Corporation.

• ENERGY STAR ® is a registered trademark of the United States Environmental

Protection Agency.

• macOS is a trademark of Apple Inc., registered in the U.S. and other countries.

• Wi-Fi, Wi-Fi Alliance, the Wi-Fi CERTIFIED logo and the Wi-Fi Protected Setup logo are registered trademarks of the Wi-Fi Alliance.

• Wi-Fi CERTIFIED, WPA, WPA2 and Wi-Fi Protected Setup are trademarks of the Wi-Fi Alliance.

• “WPS” in the settings, onscreen displays and in this manual denotes Wi-Fi

Protected Setup.

• Other product and company names herein may be the trademarks of their respective owners. However, the TM and ® symbols are not used in this document.

FCC REGULATIONS (For 120 V model)

Document Scanner, Model 6130210

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Use of a shielded cable is required to comply with Class B limits in Subpart B of

Part 15 of the FCC Rules.

Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such changes or modifications should be made, you could be required to stop operation of the equipment.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure

Guidelines as this equipment has very low levels of RF energy. But it is desirable that it should be installed and operated keeping the radiator at least 20cm or more away from person’s body.

Canon U.S.A. Inc.

One Canon Park, Melville, NY 11747, U.S.A.

Tel. No. 1-800-OK-CANON (1-800-652-2666)

ISED REGULATIONS (For 120 V model)

This device contains licence-exempt transmitter(s)/receiver(s) that comply with

Innovation, Science and Economic Development Canada’s licence-exempt

RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.

This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the ISED radio frequency (RF)

Exposure rules. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated keeping the radiator at least

20cm or more away from person’s body.

Copyright

Copyright 2020 by CANON ELECTRONICS INC. All rights reserved.

No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or by any information storage or retrieval system without the prior written permission of CANON ELECTRONICS INC.

Disclaimers

The information in this document is subject to change without notice.

CANON ELECTRONICS INC. MAKES NO WARRANTY OF ANY KIND WITH

REGARD TO THIS MATERIAL, EITHER EXPRESS OR IMPLIED, EXPECT

AS PROVIDED HEREIN, INCLUDING WITHOUT LIMITATION, THEREOF,

WARRANTIES AS TO MARKETABILITY, MERCHANTABILITY, FITNESS FOR

A PARTICULAR PURPOSE OF USE OR NON-INFRINGEMENT. CANON

ELECTRONICS INC. SHALL NOT BE LIABLE FOR ANY DIRECT, INCIDENTAL,

OR CONSEQUENTIAL DAMAGES OF ANY NATURE, OR LOSSES OR

EXPENSES RESULTING FROM THE USE OF THIS MATERIAL.

CANON ELECTRONICS INC. IS NOT LIABLE FOR THE STORAGE AND

HANDLING OF DOCUMENTS SCANNED WITH THIS PRODUCT, OR THE

STORAGE AND HANDLING OF RESULTING SCANNED IMAGE DATA.

IF YOU INTEND TO DISCARD THE ORIGINALS OF SCANNED DOCUMENTS,

YOU THE CUSTOMER ARE RESPONSIBLE FOR INSPECTING THE

SCANNED IMAGES AND VERIFYING THAT DATA IS INTACT.

THE MAXIMUM LIABILITY OF CANON ELECTRONICS INC. UNDER THIS

WARRANTY IS LIMITED TO THE PURCHASE PRICE OF THE PRODUCT

COVERED BY THE WARRANTY.

About the radio waves

This device operates in the 2.4 GHz frequency band (2.400 to 2.4835 GHz).

Other users of these frequencies include products such as microwave ovens, scientific and medical devices, similar Wi-Fi stations, wireless intercom radio equipment for mobile device identification used in industrial production lines

(requiring licensing), specific low-power radio stations that do not require licenses, amateur radio stations and others (all afterwards called “other stations”).

When using, be aware of the following.

1. Before using this device, check whether other stations are operating.

2. If radio frequency interference occurs between this device and other stations, immediately relocate the device or stop using it (stop transmitting).

After stopping, consult with your retailer or with our sales staff regarding measures to avoid interference (e.g., partitioned installation).

3. Otherwise, if troubles occur from radio frequency interference by this device to other stations, consult with your retailer or our sales staff.

6T3-0117-01.indd 2 5/15/2020 午前 11:16:46