Apple Peeler and Slicer

Please read the manual fully before using the appliance and keep the manual safe for future reference.

1











Fast and easy apple preparation for snacks, pies, sauces and more.

Also great for potatoes, pears and more.

Stainless steel blades for lasting durability.

Powerful suction base securely locks to countertops for extra stability.

Caution: Exposed blades are very sharp, handle with care.

Appliance Components

1 5

6

7

8

2

9

10

2

11

3

4

12

1. Prongs

2. Coring/Slicing Blade

3. Coring/Slicing blade wing nut

4. Peeler blade armature

5. Peeling blade adjustment screw

6. Peeling Blade

7. Peeling blade adjustment wing nut

8. Shaft

9. Handle

10. Screw regulator

11. Base (with suction clamp)

12. Suction clamp lever

2

Peeling, Coring and Slicing

1. Take the handle (9) and push the threaded hole to the end of the shaft (8). Hold the shaft still with one hand and turn the handle clockwise until it is tight.

2. Press the screw regulator (10) and the slide shaft back to its full capacity.

3. Attach the appliance to any flat smooth surface by holding the base

(11) with one hand and pushing the clamp lever with the other hand.

The appliance should be fully attached to the surface.

4. Push the apple, stem end first all the way onto the prongs as illustrated in the diagram below

5. Ensure that the peeling blade armature (4) is standing upright and the catch is disengaged. Turn the handle until the apple is against the eye of the coring/slicing blade (2)

6. Undo the coring/slicing blade wing nut (3) and align the eye of the coring/slicing blade with the centre of the apple and then tighten the coring/slicing blade wing nut.

7. Turn the handle in a clockwise fashion until the apple is completely sliced and cored.

8. Carefully pull the apple from the prongs whilst holding the shaft with the other hand. Turn the handle anti-clockwise to release the core from the shaft.

3

Peeling Only

1. Press the screw regulator (10) and slide the shaft back to its full extent (8).

2. Attach the appliance to any flat smooth surface by holding the base

(11) with one hand and pushing the clamp lever (12) with the other hand. The appliance should then be fully attached to the surface.

3. Loosen the coring/slicing blade wing nut (3) and disengage the coring/ slicing blade (2) so it is now in a horizontal position.

4. Push an apple stem end first all the way onto the prongs (1).

5. Turn the handle clockwise until the apple has completely passed through the peeling blade (2). The apple should now be peeled.

6. Carefully remove the apple by holding the base of the appliance with one hand whilst turning the handle in an anti-clockwise direction.

Slicing and Coring Only

1. Press the screw regulator (10) and slide the shaft back to its full extent (8).

2. Attach the appliance to any flat smooth surface by holding the base

(11) with one hand and pushing the clamp lever (12) with the other hand. The appliance should then be fully attached to the surface.

3. Pull the peeling blade armature (4) back and secure it in place with the catch.

4. Push an apple stem end first onto the prongs. (1)

5. Ensure that the Peeling blade armature (4) is standing upright and the catch is disengaged. Turn the handle until the apple is against the eye of the coring/slicing blade. (2)

6. Undo the coring/slicing blade wing nut (3) and align the eye of the coring/slicing blade with the centre of the apple and then tighten the coring/slicing blade wing nut.

7. Hold the apple with one hand and turn the handle anti-clockwise to release the core from the shaft. The apple is now ready for consumption.

4

Adjusting The Blades

1. To adjust the minimum fruit diameter, use a screwdriver to turn the adjustment screw (5) clockwise or counter clockwise until the desired distance is achieved.

2. To adjust the peeling depth, loosen the peeling blade wing nut (7) and adjust the peeling blade (6) to the desired depth then fasten the peeling blade wing nut.

UK and EU Warranty

Your new Andrew James product comes with a 24 month guarantee and a 2 year fixed warranty, effective from receipt confirmation. Your receipt or order number is required as proof of purchase date so it is imperative that you keep it safe. This guarantee only applies if the item has been used solely for the use intended, and all instructions have been followed accordingly.

Please note this product is only for domestic use only and is not for commercial use.

Abuse of your product will invalidate the guarantee. Returned goods can only be accepted if repackaged properly within the original colour product box, and presented with the original receipt of sale/order number. This does not affect your statutory rights.

Returned products must be cleaned and returned to us in as close to delivery condition as possible.

If your product develops a problem within the first 12 months of the fixed warranty, we will pay all shipping costs to have it returned to us. After 12 months the customer will be liable for the cost of returning the product to us. We will then pay to have the repaired/replaced item shipped back to the customer.

If you wish to return your item for a full refund, you have the right to do so within the first 7 days. For our returns policy please go to:

www.andrewjamesworldwide.com

Customers are responsible for any taxes applied to our products when they are shipped outside of the EU.

All of our prices are inclusive of VAT.

Once a product has been returned to us, we will aim to repair or replace it

5

within 30 days of receipt.

The guarantee does not cover any defect arising from improper use, damage, build-up of lime scale or repair attempts made by third-parties.

Also, the guarantee does not cover normal wear and tear of individual parts.

Recycling Information for Non-Electrical Products

Make unwanted products and packaging available for recycling.

Separate collection and recycling of used products, batteries and packaging allows the recovery and recycling of materials. Re-use of materials helps prevent environmental pollution and reduces the demand for raw materials.

Contact Details

Address: Andrew James UK Ltd, Lighthouse View, Spectrum Business

Park, Seaham, Durham, SR7 7PR, UK

Customer Service Telephone: 0191 377 8358

Email: [email protected]

Twitter: @andrewjamesltd Facebook: Andrew James

Copyright Andrew James

AJ000069 | 07/2018

www.andrewjamesworldwide.com

6