MODEL PART DIAGRAM

FRONT

Control Panel

Dust sensor

Front Panel

PACKAGE CONTENTS

Unit

(1) Pre-Filter

(1) AOC™ Carbon Filter

(1) True HEPA Filter

BACK

WHERE TO USE

12~18 in

12~18 in

Allow 12 ~ 18 in. of space between TVs, radios, and other electronics

Electromagnetic interference from certain electronics may cause product malfunction.

Place indoors away from direct sunlight

Direct exposure may cause product malfunction or failure.

Only place on hard, flat surfaces

Flimsy or slanted surfaces may result in abnormal noise and vibrations.

Allow at least 12 ~ 18 in. from walls for maximum air flow

1

5-STAGE AIR PURIFICATION

12 Pet Filter

Air Outlet

Vent

Handle

Power Plug

User Manual

01 Pet Filter 02 Pre-Filter 03 AOC™ Carbon Filter

01. Pet Filter

• First line of defense against largest particles, dander, and pet hair.

• Extends the filter life of the remaining filters.

02. Pre-Filter

Designed to catch larger airborne particles found indoors.

03. Advanced Odor Control(AOC™) Carbon Filter

Reduces VOCs and household odors from cooking, pets, and smoke.

04 True HEPA Filter 05 PlasmaWave ®

04. True HEPA Filter

Captures 99.97%* of airborne allergens including; pollen, mold spores, dust, pet dander, microbes, and smoke. (*Particles as small as 0.3 microns in size.)

05. PlasmaWave ®

Creates Hydroxyls which can help to reduce the presence of airborne Bacteria and Viruses.*

(*Based on independent laboratory test conducted on

Influenza A Virus H3N2, E. Coli, Pseudomonas Aeruginosa,

Staphylococcis Aureus, Salmonella Typhimurium.)

MAINTENANCE

When to Replace Filters

Filter

Pre-Filter

AOC™ Carbon Filter

True HEPA Filter

Indicator Light none

When to Service

Clean once every 14 days

Can NOT be WASHED

When to Replace

Permanent

Last Approx. 12 months

• When the Check Filter Indicator LED is on, it is time to replace the True HEPA Filter and AOC™ Carbon Filter.

• Intervals between filter replacement may vary depending on environment.

4

CONTROL PANEL

01 02 03 04 05 06 07

08 09 10 11 12 13

01. Odor Sensor

Detects the amount of odorous gas in the environment.

When in Auto mode, the fan speed adjusts according to the detected amount of gas.

02. Filter Replacement Indicator

LED light indicates when it is time to change the filter.

03. Filter Reset Button

After replacing the filters, turn the unit on and use a thin object, such as a paper clip, to press the Filter

Reset Button for 5 seconds.

04. Fan Speed Indicator

Indicates the current fan speed.

05. PlasmaWave ® Indicator

Indicates whether PlasmaWave ® is enabled or disabled.

06. Timer Indicator

If timer has been set, the LED light indicates the set time of operation.

07. Child Lock Indicator

LED light indicates whether Child Lock Mode is enabled or disabled.

08. Light Sensor

Detects the amount of ambient light in the environment.

09. Power Button

Turns the unit on or off.

• During the first 4 minutes of powering up, the Air Quality light will flash as the Odor Sensors measure the air quality in the environment, after which normal detect will begin.

2

10. Mode Button

Press to cycle through to set the mode of operation

(Auto, Sleep). The unit will default to Auto with

PlasmaWave ® enabled when first powered on.

Auto Mode:

• Auto Mode automatically adjusts fan speeds according to your indoor air quality. The fan speed will adjust to low when air quality is good, medium when fair, and to high when poor.

Sleep Mode:

• When Sleep Mode is activated, the Air Quality Indicator

LED light is disabled.

• Fan speed will automatically set to minimum speed

(lower than 'Low') which will be nearly silent.

• When Sleep Mode is active, PlasmaWave ® disabled, but it can be turned back on.

will be

Manual Mode (Setting fan speed):

Users can opt to manually set the fan speed to Low,

Medium, High, or Turbo.

• Press the Mode Button to select the desired fan speed.

• The Mode LED light will indicate the selected fan speed and operation will begin.

11. PlasmaWave ® Button

Enables or disables PlasmaWave

• Press the PlasmaWave ®

® .

button when the unit is on to enable or disable this feature.

• PlasmaWave ® contaminants.

works to remove harmful airborne

INITIAL OPERATION

Latch

04

03

02

1. Remove the front panel by grasping its upper edge and gently pulling forward.

4. Install the filters until they fit securely in place.

04. True HEPA Filter (back)

03. AOC™ Carbon Filter (middle)

02. Pre-Filter (front)

Latch

2. Remove the Pre-Filter, then the plastic bag of filters behind it.

5. After filters are installed, close the front panel.

3. Remove filters from protective plastic bag.

5

6. Insert the power cord into an electrical outlet.

"When the unit is running, you may hear a chirping or buzzing sound. The sound is from large particles passing through PlasmaWave not signify product failure."

® , it is normal and does

• When on, the LED light will indicate the current indoor air quality according to three levels. BLUE(good), AMBER

(fair), RED (poor).

12. Timer Button & Air Quality LED Light

• Press to cycle through and set desired length of operation.

(1hr, 4hr, 8hr, [NO TIMER]) Air Quality

Indicator

• To turn the Air Quality LED light on or off, press and hold the Timer Button for 3 seconds.

13. Child Lock

Press and hold the Child Lock Button for 3 seconds to enable or disable the feature.

• When the Child Lock indicator is lit, the feature is enabled.

• When Child Lock is enabled, the control panel is locked and the settings cannot be changed.

INSTALLING THE PET FILTER

• To disable, press and hold the Child Lock Button again for 3 seconds.

For optimal performance, only genuine Winix filters should be used with your Winix Air Purifier

1 2 3 4 5 6

Tabs Tabs

Latch Latch

1. Remove the front panel by grasping the upper edges and gently pulling the front panel toward yourself.

The latch at the lower edge of the panel must be released from its position.

2. Press the tabs on the top edge of the Pre-Filter to remove it.

3. Remove the liner around the outside of the

Pre-Filter to reveal the adhesive tape.

4. Attach the Pet Filter to the front of the Pre-Filter.

Press the adhesive tape around the edge of the

Pet Filter to adhere it to the Pet Filter.

5. Insert the Pre-Filter. Insert the bottom tabs into the slots on both sides of the lower part of the unit.

Rotate the top of the filter upward and snap the upper tabs into the slots securing the Pre-Filter in place.

3

6. Replace the front panel by first inserting the latch at the bottom edge into the base of the unit, then rotate the panel upward toward the top of the unit until it magnetically snaps closed.

Filter Replacement Period

Filter Type

Pet Filter

Replacement Period

1 Month

Quantity

12 Per Pack

• The Replacement Period may be different depending on the surrounding environment.

Customer Service and Purchase Inquiry

www.winixamerica.com l [email protected]

REPLACING FILTERS

After replacing a filter, press the Filter Reset Button for at least 5 seconds.

CLEANING CARE

Cleaning the Filters: Cleaning the Exterior & Interior:

Use a vacuum cleaner or soft brush to clean the Pre-Filter

• If it is excessively soiled, rinse in room temperature water.

• Do not use detergent or soap.

• Allow the filter to dry for 24 hours or more before using.

• Intervals between filter cleaning may vary depending on the air quality in the environment.

• Do not use hot water over 104 o F.

Cleaning the Dust Sensor

1. Use a damp cotton swab to wipe the lens and intake area of the

Dust Sensor.

• To clean the sensor area, use only water. Do not use volatile substances such as alcohol or acetone.

2. Wipe away any remaining moisture with a dry cotton swab.

N O T I C E

Do not use benzene, alcohol, or other volatile fluids, which may cause damage or discoloration.

6

1. Open the front panel and clean the interior with a vacuum cleaner.

• A handheld vacuum or hose attachment will work best.

2. Dampen a cloth with room temperature water and wipe down the interior and exterior of the unit.

3. Wipe the unit down with a clean, dry cloth.

• Ensure no moisture remains before plugging the unit back in.

* For optimal performance, clean every 1 - 2 months.

N O T I C E

• When cleaning the unit, always unplug the power cord first and then wait until the unit has cooled down.

• Never disassemble, repair, or modify this unit yourself.

• Do not use flammable sprays or liquid detergents.

• Do not allow children to clean or maintain the unit.

• Before cleaning or maintaining, ensure unit is unplugged.

SAFETY AND CAUTIONS

Before operating this equipment, carefully read and follow these safety cautions.

Ensure filters are inserted before running unit.

Running the unit without filters can shorten the lifespan of the unit and cause electric shock or injury.

Be sure foreign objects are NOT inserted into the vents on the unit.

Objects can include pins, rods, and coins.

Do not touch any part of the interior of the unit with wet hands.

The high voltage may cause electric shock.

Ensure unit intake and outlet vents do not become blocked.

Blockage may lead to increased internal termperatures, causing product failure and deformation.

Do not use the unit as a step stool or place heavy objects on the unit.

Personal injury may occur or product failure and deformation.

W A R N I N G

Follow these instructions to reduce the risk of serious injury or death and to reduce risk of damaging the unit.

• If the power cord is damaged, it must be replaced by a special cord. Reassembly is available from the manufacturer or its service agent.

• This appliance is not intended for use by a person

(including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge of the unit, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

• Children should be supervised to ensure that they do not play with the appliance.

• This unit is not intended to be used to preserve documents or art conservation.

7

Do not pull on the power cord when unplugging the unit.

Do not tie or knot the power cord when unit is in operation.

If the unit becomes submerged in water, unplug it and contact customer service.

Do not unplug or move the unit while in operation.

Do not plug additional appliances into the same outlet or power supply.

Do not touch the plug with wet hands.

Unplug the unit when not in operation for extended periods of time.

Do not place around heating elements.

Do not use around mist or fumes from industrial oil or around large quantities of metallic dust.

The cord can become damaged by forcefully bending, pulling, twisting, bundling, pinching or placing heavy objects on it.

Do not install in any sort of motor or transport vehicle (trucks, boats, ships, etc.).

Do not place in an area with excessive amounts of noxious gases.

Do not place near any flammable materials

(aerosols, fuel, gases, etc.).

Do not have the unit facing into wind or drafts.

Do not place below any electrical outlet.

Do not place in excessively humid areas where the unit may become wet.

Do not place unit closer than 12 inches from the wall during operation. It may cause condensation on the wall and the surrounding area.

FREQUENTLY ASKED QUESTIONS

The unit does not turn on at all.

• Is the plug securely attached to the outlet?

- Make sure the outlet has power going to it, and ensure the plug is secured.

• Is there a power outage?

- Check to see if other lights and electrical equipment are working and try again.

The unit doesn’t work in Auto Mode.

• Has Auto Mode been selected?

- Press the Fan Speed button until Auto Mode is selected.

• Is the sensor blocked or clogged?

- Wipe Odor Sensor with wet cloth, then dry.

It vibrates and makes a lot of noise.

• Is it running on a slanted or uneven surface?

- Move the unit to a hard, flat, even area.

The power plug and outlet feel hot.

• Is the plug securely plugged in?

- Make sure the plug is properly plugged into the outlet.

There is a strange smell.

• Is it being used in a place with a lot of smoke, dust, or odors?

- Clean the air intakes on either side and clean the

Pre-Filter.

- Replace the AOC™ Carbon Filter and True HEPA Filter.

The fan strength is weak. The unit is not purifying the air.

• Is the Check Filter Indicator light on?

- Change the filters as required.

The display panel is dim.

• Is the Light Sensor blocked by debris?

- When Auto Mode is on, Sleep Mode is automatically activated when the Light Sensor detects that the room is dark.

PRODUCT WARRANTY

The terms of the warranty are as follows:

1. This product is manufactured under stringent quality control and inspections.

2. The warranty will be voided if product failure is a result of negligence or misuse by the consumer.

3. A proof of purchase must be presented upon claiming a Product Warranty.

4. Store the proof of purchase in a safe place or register your product on winixamerica.com to upload your proof of purchase.

5. This warranty is valid only in the USA and Canada.

* for more information visit

https://winixamerica.com/terms-and-conditions/

Product Name

Model Name

Purchase Date

Warranty Period

Place of Purchase

Place of Purchase tel.

Customer

Address

Name

Tel.

Air Purifier

HR900

Two (2) Years

After purchase, be sure to complete all of the above information.

9

SAFETY INSTRUCTIONS

Thank you for purchasing a Winix air purifier. This product is for household use only.

IMPORTANT CAUTIONS FOR USING YOUR AIR PURIFIER:

WARNING: Follow the instructions in this manual to reduce the risk of electric shock, short circuit, and/or fire.

• Do not repair or modify the unit yourself.

• All repairs should be completed by a qualified Winix technician.

• The plug for this unit is polarized with one blade wider than the other. Do not force the plug into an electrical outlet. Do not alter the plug in any way. If the plug does not fit into the outlet, reverse the plug. If it still does not fit, contact a qualified technician to install a proper outlet.

• Do not use if the power cord or plug is damaged or the connection to the wall outlet is loose.

• Use AC 120 V only.

• Do not damage, break, forcefully bend, pull, twist, bundle, coat, pinch, or place heavy objects on the power cord.

• Periodically remove dust from the power plug. This will reduce the risk of shock due to humidity build up.

• Remove the power plug from the outlet before cleaning the unit. When removing the power plug, grasp by holding the plug itself, never hold by the cord.

• If the power plug is damaged, it must be replaced by the manufacturer or a qualified technician.

• Remove the power plug from the outlet when not in use.

• Do not handle the power plug with wet hands.

• Do not operate the unit when using indoor smokegenerating insecticides.

• Do not clean unit with benzene or paint thinner.

Do not spray insecticides on the unit.

• Do not use the unit where it is humid or where the unit may become wet, such as the bathroom.

• Do not insert fingers or foreign objects into air intake or outlet.

• Do not use the unit near flammable gases. Do not use near cigarettes, incense, or other spark-creating items.

• Unit will not remove carbon monoxide emitted from heating appliances or other sources.

IMPORTANT PRECAUTIONS FOR USING YOUR AIR PURIFIER:

• Do not block the intake or outlet vents.

• Do not use near hot objects, such as a stove.

• Do not use where the unit may come into contact with steam.

• Do not use the unit on its side.

• Keep away from products that generate oily residue, such as a deep fryer.

• Do not use detergent to clean the unit.

• Do not operate without a filter.

• Do not wash and reuse the True HEPA Filter or the Carbon Filter.

• Hold the handle on the back of the unit to transport.

• Do not hold by the front panel.

• Do not stick any small objects into the air outlet vents or fan.

8

UNIT SPECIFICATIONS

Model Name

Power Voltage

Power Rate

Verified Room Size

Dimensions

Weight

Replacement Filter

HR900

AC 120 V / 60 Hz

90 W

300 sq.ft.

16.3 in(W) × 9.6 in(D) × 23.6 in(H)

18.7 lbs

Filter T / SKU: 1712-0093-00 & Filter U / SKU: 1712-0094-00

The exterior, design, and product specifications may be changed without prior notice to improve product performance.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic

Development Canada's license-exempt RSS(s). Operation is subject to the following two conditions:

• This device may not cause interference.

• This device must accept any interference, including interference that may cause undesired operation of the device.

"In French: Cet appareil contient des émetteurs/récepteurs exemptés de licence et conformes aux normes Innovation,

Science et Economic. RSS(s) sans licence de Développement Canada. Le fonctionnement est soumis aux deux conditions suivantes:

• cet appareil ne doit pas causer d’interférences nuisibles, et

• cet appareil doit accepter toute interférence reçue, y compris les interférences pouvant provoquer un fonctionnement non souhaité."

10

AIR PURIFIER

Model

Use & Care

Guide

HR900

• The product warranty is printed on the back of this guide.

• This product is manufactured for use only in USA / CA.

• This product is suitable for 120 V only.

The energy efficiency of this ENERGY STAR certified model is measured based on a ratio between the model’s CADR for Smoke and the electrical energy it consumes, or CADR/Watt.

User Manual

Contact Winix for product related inquiries and customer service

•

Dedicated Call Center:

☎

(877) 699-4649

•

Website: www.winixamerica.com

To expedite service, please specify the model name and number, the nature of the problem, your contact information, and your address.

2610-0254-00 Rev.03