cMT-CTRL01
CODESYS PLC with IIoT Gateway
Feature
CODESYS PLC compliant with IEC61131-3
Fan-less Cooling System
Built- in 4GB Flash Memory and RTC
SD Card Slot Supports SD/SDHC Cards
Rich combination of iR Series Modules
Gateway
COM2 / COM3 RS-485 2W Supports MPI 187.5K
Supports OPC UA Server/Client and MQTT
Modbus TCP/IP Gateway
(I/O modules not included)
Memory
Flash
RAM
Data, Memory, Code
Retain area
Persistent area
Processor
File system
SD Card Slot
Ethernet
I/O Port
COM Port
Local bus
CAN Bus
CODESYS Protocol
RTC
Power
Specification
Environment
Certificate
Input Power
Power Isolation
Power Dissipation
Current for Internal Bus
Current Consumption
Voltage Resistance
Isolation Resistance
Vibration Endurance
PCB Coating
Enclosure
Dimensions WxHxD
Weight
Mount
Protection Structure
Storage Temperature
Operating Temperature
Relative Humidity
CE
UL
Software
4 GB
512 MB
3 MB
16 KB (every minute) (Kept after reboots)
16 KB (every minute) (Kept after downloads)
8MB
Dual-Core 32 bits RISC 1GHz
SD/SDHC
Ethernet 1: 10/100/1000 Base-T x 1
Ethernet 2: 10/100 Base-T x 1
COM1 RS-232 2W, COM2 RS-485 2W/4W,
COM3 RS-485 2W iBus
N/A
Modbus TCP/IP Master, EtherCAT Master
Built-in
24±20%VDC
Built-in
Nominal 310mA ＠ 24VDC
Max 2A ＠ 5VDC
550mA ＠ 5VDC
500VAC (1 min.)
Exceed 50M
@ 500VDC
10 to 25Hz (X, Y, Z direction 2G 30 minutes)
Yes
Plastic
50 x 109 x 81 mm
Approx. 0.24 kg
35 mm DIN rail mounting
IP20
-20° ~ 70°C (-4° ~ 158°F)
-10° ~ 50°C (14° ~122°F)
10% ~ 90% (non-condensing)
CE marked cULus Listed
EasyBuilder Pro V6.03.02 or later versions
CODESYS V3.5 SP10 Patch 3 or later
Dimensions
英文版 cMT-CTRL01
Side View
Top View
50mm [1.97"] e f g
Front View a b c d
81mm [3.19"] h
Side View
簡中版 e f g
50mm [1.97"] a b c d
81mm [3.19"] h a RUN/STOP switch b c
Reset Button
COM1: RS-232,
COM2: RS-485
2W/4W,
COM3: RS-485 2W d Power Connector e f g h
Ethernet 1
Ethernet 2
Bottom View
Ordering Information
cMT-CTRL01:
CODESYS PLC with Gateway, 4GB flash memory, 512MB
RAM on board
SD Card Slot
RZACEA020 (optional) :
EasyAccess 2.0 Activation Card
Expansion
Connector
Pin Assignment:
COM1 [RS232], COM2 / COM3 [RS485], 9 Pin, Male, D-sub
PIN#
COM1
[RS-232]
COM2
[RS-485]
2W 4W
COM3
[RS-485]
2W
5
6
7
8
9
1
2
3
4
RxD
TxD
GND
Data+ Rx+
Data- Rx-
Tx+
Tx-
Data+
Data-
Other company names, product names, or trademarks in this document are the trademarks or registered trademarks of their respective companies.
This document is subject to change without notice.
Copyright© 2019 Weintek Labs., INC. All rights reserved.
Contact: WEINTEK LABS., INC. TEL: +886-2-22286770 Web:www.weintek.com cMT-CTRL01_Datasheet_ENG_20201125
日文版 f e g
50mm [1.97"] a b c d
81mm [3.19"] h
