AVTech - Velleman NVR4 Owner Manual
Werbung
Werbung
NVR4
EN 16-CHANNEL HD NETWORK VIDEO RECORDER – HDMI – ONVIF
– EAGLE EYES
NL HD NETWERK VIDEORECORDER MET 16 KANALEN – HDMI –
ONVIF – EAGLE EYES
FR ENREGISTREUR VIDÉO RÉSEAU HD À 16 CANAUX - HDMI -
ONVIF - EAGLE EYES
ES GRABADOR DE VÍDEO EN RED DE ALTA DEFINICIÓN DE 16
CANALES - HDMI - ONVIF - EAGLE EYES
DE 16-KANAL HOCHAUFLÖSENDER NETZWERK-VIDEOREKORDER -
HDMI - ONVIF - EAGLE EYES
QUICK INSTALLATION GUIDE
KORTE HANDLEIDING
GUIDE D'INSTALLATION RAPIDE
GUÍA RÁPIDA
SCHNELLEINSTIEG
3
13
23
33
43
EN - Connection diagram
NL - Aansluitdiagram
FR – Schéma de connexion
ES - Esquema de connexion
DE - Anschlussdiagramm
NVR4
V. 01 – 14/04/2014 2 ©Velleman nv
NVR4
QUICK INSTALLATION GUIDE
1.
Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized company for recycling. This device should be returned to your distributor or to a local recycling service. Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Velleman! Please read the manual thoroughly before bringing this device into service. If the device was damaged in transit, don't install or use it and contact your dealer.
2.
Safety Instructions
Keep this device away from children and unauthorized users.
Risk of electroshock when opening the cover. Touching live wires can cause life-threatening electroshocks.
Always disconnect mains power when device not in use or when servicing or maintenance activities are performed. Handle the power cord by the plug only.
3.
General Guidelines
Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.
Indoor use only. Keep this device away from rain, moisture, splashing and dripping liquids.
Never put objects filled with liquid on top of or close to the device.
Keep this device away from dust and extreme temperatures. Make sure the ventilation openings are clear at all times. For sufficient air circulation, leave at least 1" (±2.5 cm) in front of the openings.
Protect this device from shocks and abuse. Avoid brute force when operating the device.
• Familiarise yourself with the functions of the device before actually using it.
• All modifications of the device are forbidden for safety reasons. Damage caused by user modifications to the device is not covered by the warranty.
• Only use the device for its intended purpose. Using the device in an unauthorised way will void the warranty.
• Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the dealer will not accept responsibility for any ensuing defects or problems.
• Keep this manual for future reference.
• DO NOT use this product to violate privacy laws or perform other illegal activities.
4.
Features
• full high definition recording
• recording throughput: 16 channels
• 1920 x 1080 pixels (full HD): 480 IPS, 120 Mbps
• mobile surveillance via free EagleEyes software on iPhone, iPad, and Android
• mobile phone connection via GPRS, 3G data or Wi-Fi
• GUI (Graphical User Interface) display and USB mouse
• high compatibility and offsite backup: o
compatible with all major IP cameras that are ONVIF certified o
eSATA interface to connect a disk array (up to 4-bay disk array with RAID 0 and 1) o
works with free Central Management System (CMS) software for offsite backup
V. 01 – 14/04/2014 3 ©Velleman nv
NVR4
• local and remote control completely independent
• HDMI video output resolution up to 1080p
• automatic integrated Dynamic Domain Name Service (DDNS): free service
• USB mouse: incl.
• IR remote control: incl.
Optional hardware
• hard disk: HD500GB/S, HD1TB/S, HD2TB/S
• monitor: MONSCA9
• HDMI cable: PAC400Tx series and PAC400Gx series
• compatible IP cameras: CAMIP16, CAMIP17, CAMIP18, CAMIP19
• router: EM4544, EM4543, EM4571, PCRT1
5.
Overview
Front panel alarm wan
SATA lan
HDD1 to HDD5
USB port mouse port
Back panel
LED indicator: an alarm event occurs
LED indicator: the NVR is connected to internet
LED indicator: the NVR is connected to the LAN
LED indicator: SATA hard disk is active
LED indicator: up to 5 hard disks are installed in the NVR and connected well
(3 HDD with quick-lock installation)
Insert a compatible USB flash drive for video backup.
Note: For the list of compatible USB flash drives, refer to the full manual on the
CD-ROM.
Insert a mouse (included).
1
2
3
4
5
6
7
1 2 3
AUDIO OUT
HDMI video output port
External I/O eSATA
WAN
LAN
DC 19V IN
4 5 6 7
Connect to an amplifier audio line-in.
Connect to a monitor that supports high-definition video output (HDMI port).
Note: Use an appropriate adapter (not incl.) to connect a monitor with VGA or composite connectors.
RS 485 port
This port is used to connect a storage device supporting eSATA interface; for instance, an external disk array.
Connect to internet via an 8P8C (RJ45) network cable
Connect to local IP cameras via an 8P8C (RJ45) network cable.
Connect to the power supply adapter (incl.).
V. 01 – 14/04/2014 4 ©Velleman nv
6.
Installing a hard disk drive
NVR4
Preparation
• Make sure to unplug the device from the mains before servicing and do not touch any electronic circuitry to avoid electrostatic discharge.
• Obtain a suitable hard disk (not included), type SATA. The hard disk must be formatted.
• You can install up to 3 with the quick lock system (shown below).
• If you want to use a green hard disk, use only a disk designed especially for surveillance to ensure the device works properly.
1.
Loosen the screws and remove the top cover.
2.
Locate the hard disk connector and bracket in the device. The screws are attached to the bracket.
3.
With the PCB side facing down, align the hard disk with the hard disk power & sata port, and insert the hard disk.
4.
Fasten the hard disk to the bracket with the built-in screws.
7.
Connection Diagram
• You can connect up to 16 IP cameras.
• To ensure that automatic configuration works well, connect and switch on the IP cameras first. Only then switch on the NVR.
• This device requires a minimum of network installation knowledge.
• To access the NVR remotely with your mobile device or laptop, you need to connect the NVR recorder to the
Internet. For details, please refer to the setup manual on www.surveillance-download.com/user/network_setup/network_setup_recorder.pdf.
Connecting the IP camera (plug and play)
Refer to the illustration on page 2 for the setup diagram.
1.
Connect the camera to a hub/switch.
2.
Wait until the camera is configured automatically and the images appear on the monitor.
V. 01 – 14/04/2014 5 ©Velleman nv
NVR4
Notes
The recorder will automatically configure the IP address of a camera connected by LAN if:
• The connected IP camera is our brand’s IP camera.
• The default IP configuration method of the camera is set to DHCP (default setting).
• The camera is powered on before the recorder is powered on.
8.
Information and Menus on the Screen
Key lock / unlock
To lock or unlock NVR local operation, click (lock) or (unlock) on the NVR status panel. When you unlock NVR local operation, the system asks you to enter a user name and password.
Note: The default user name and password are "admin". Different user types have different access rights to
NVR functions. For details, refer to the full manual on the CD-ROM.
8.2
NVR and Network Status Icons
The status icons for NVR and network are displayed on the upper right corner of the screen (next to the available hard disk space).
The icons displayed may vary depending on your situation or configuration.
The possible icons are:
NVR status Icons key lock channel lock
USB flash drive / device connected timer recording on overwrite on sequence mode on
PTZ mode on
CPU load key unlock channel unlock no USB device connected timer recording off overwrite off sequence mode off
PTZ mode off
Network Status Icons
(WAN) internet connected
(WAN) local connection
(LAN) auto mode – Mbit/s
(LAN) DHCP / static IP mode
(WAN) internet disconnected
(LAN) auto mode – Gbit/s
(LAN) camera disconnected
Channel Status
The Channel Status icons are displayed on each channel on the screen. The possible icons are: auto search on auto search off live audio on audio playback on original size audio off audio playback off fit to screen
V. 01 – 14/04/2014 6 ©Velleman nv
recording alarm event live information human detection event motion event playback information
Quick Operation Menu
To access the Quick Operation menu, point the mouse to the arrow mark on the left of the screen. It contains the following icons:
Click to show the channel switch panel and select the channel you want.
Click to display the playback control panel. In the control panel:
Click to play the latest recorded video clip
Click to open the search list.
Click to open the IP search window and check the connection status of each channel.
Click to show the power-off panel to stop or reboot the system.
Main menu
To access the main menu, right-click anywhere on the screen. Right-click again to hide the menu.
Icon Label Contains settings for
Quick start Channel Title, Event Status, Date Display, Mouse Sensitivity, Record Config.
System
Event information
NVR4
Account, Tools, System Info, Backup Schedule, Online, Regular Report
Quick Search, Event Search, HDD Info, Event Log
Schedule setting
Event Timer, Record Timer
Playback panel
To access the playback panel, open the Quick Operation menu (see above) and click . fast forward Click to fast forward at 4 to 32 times normal speed. fast rewind play/pause stop slow playback previous/next hour quick search
Click to fast rewind at 4 to 32 times normal speed.
Click to play the latest recorded video clip. Click again to pause.
In pause mode, click once to go one frame forward, or to go one frame backward.
Click to stop the video playback.
Click once to play at 1/4 normal speed, click twice for 1/8 normal speed.
Click to jump to the next/previous one-hour time interval (for example,
11:00 to 12:00 or 14:00 to 15:00) and start playing the earliest video clip recorded during this hour.
Click to enter the quick search menu.
V. 01 – 14/04/2014 7 ©Velleman nv
NVR4
9.
Configuration of camera on LAN Port plug and play
Note: This configuration method applies to ETS cameras.
Automatic Configuration
The NVR will automatically configure the IP address of an ETS camera connected by LAN if:
• The default IP configuration method of the camera is DHCP.
• The camera is powered on before the NVR is powered on.
If not, you can configure the IP address of your camera manually as described further below.
Manual Configuration
If the NVR does not configure the IP address of your camera automatically as described above, the default IP configuration method of your IP camera may not be set to DHCP. To solve this, reconfigure the camera’s IP address to 10.1.1.xx (xx ranges from 11 to 253), in the same network segment as the NVR.
1.
In the quick operation panel, click . You’ll see the list of every connected IP camera with its connection status and MAC address.
2.
Select an IP address that is not used (UNUSED), and click SETUP.
3.
Select STATIC in NETWORK TYPE, and change the IP address to 10.1.1.xx (xx ranges from 11 to 253).
4.
Click APPLY and EXIT to save your changes.
5.
Wait until the NVR detects the IP camera and displays images.
Configuring a remote internet camera
Via internet you can record video images from an IP camera in a remote location.
1.
Make sure that the IP camera is accessible outside its LAN network via a dynamic domain name (for example ip_office.ddns.eagleeyes.tw).
2.
In the main menu, click (ADVANCED CONFIG) and select CONNECTION.
V. 01 – 14/04/2014 8 ©Velleman nv
NVR4
3.
To assign a channel to a remote IP camera, click URI to enter the address of the camera and its port number.
4.
Click SETUP to enter the access information of the camera.
5.
Enter the user name (USER NAME) and password (PASSWORD) to access the IP camera.
6.
Click GET TYPE to detect the camera and make sure the access information is correct.
7.
Select the image size (IMAGE SIZE), image quality (QUALITY), and images per second (I.P.S.).
Note: The available options depend on the camera you want to connect.
8.
Click GET TYPE to detect the camera and make sure the access information is correct.
9.
Optional: for a camera with audio recording, set AUDIO to ON or OFF.
10.
Quick Operation
Switching off and Rebooting
To power off or reboot the NVR:
• In the Quick Operation menu, click and then click (power off) or (reboot).
Viewing a Channel in Full-Screen Mode
You can view a channel in full screen mode as follows:
• Click directly on the channel image to see that channel in full screen mode.
Double-click the image to restore the previous overview.
- or -
1.
In the quick operation panel, click .
2.
On the control panel that appears, select the channel you want to display in full screen mode.
3.
Click the button 4 – 6 - 9 - 12 or 16 to select another view.
Playing Recorded Video Clips
1.
Make sure that manual and/or event recording is enabled: in the main menu, click (ADVANCED
CONFIG) and select RECORD to check or adjust the settings.
V. 01 – 14/04/2014 9 ©Velleman nv
NVR4
2.
In the playback panel, press the play button . The recorded files are shown.
3.
The fast forward and fast rewind buttons increase/decrease the playback speed. Press the button repeatedly to increase/decrease the speed to 4x, 8x, 16x, or 32x (max.).
4.
Press the pause button to pause playback.
5.
Press the stop button to stop playback and return to live monitoring.
11.
Push Status
The Push Status functions sends notifications about events to the EagleEyes app on your mobile device. You can select what events you want to be notified about.
Prerequisites
Before using this function, check the following:
• You have iPhone, iPad, or Android™ mobile phone or tablet.
• You have subscribed to and you can access mobile internet services for your mobile phone.
• The mobile app, EagleEyes, is installed in your mobile device.
For details, see the section "Installing the EagleEyes" app below.
Configuring the WAN port
1.
Make sure the NVR is properly connected to a switch with a RJ45 network cable.
2.
On the NVR, select ADVANCED CONFIG > NETWORK > WAN.
Configuring Push Status
Before configuring push status, make sure that:
• The NVR is set up as described above.
• The NVR is connected to the internet.
On the NVR
1.
Select ADVANCED CONFIG > NOTIFY > PUSH STATUS.
2.
Set ACTION to ON.
3.
Select the system event or events you want to get notified about on your mobile device.
V. 01 – 14/04/2014 10 ©Velleman nv
NVR4
On your mobile device
• Enable Notifications in EagleEyes on your mobile device.
• For details about EagleEyes, refer to the EagleEyes Installation Guide on www.velleman.eu
or visit www.eagleeyescctv.com.
Testing
1.
Try to trigger an alarm event.
For example, if you set VIDEO LOSS as an event, disconnect the video to see if you get a push status notification.
11.2
Installing the EagleEyes app
Prerequisites
Before installing EagleEyes to your mobile phone for remote surveillance, make sure you have checked the following:
• You have subscribed to and you can access mobile internet services for your mobile phone.
• Note: You might be charged for internet access via wireless or 3G networks. For the internet access rate details, check with your local network operator or service provider.
• You have noted down the IP address, port number, user name and password used to access your network camera from the internet.
Where to download
1.
Connect to www.eagleeyescctv.com from your mobile device, and sign in.
Do not try to download EagleEyes from your computer. o
For Android, select the download link from the website to start downloading. o
For iPhone and iPad, two versions of EagleEyes are available: EagleEyesHD Plus (at a fee), and
EagleEyesHD Lite (free).
2.
Select the version you want, and you will be directed to the App Store to download the application.
3.
When the download is completed, EagleEyes will install automatically to the default location or any location you choose.
12.
Technical Specifications
video compression video input video output recording mode multiplex operation audio I/O: motion detection area motion detection sensitivity pre-alarm recording
H.264 / MPEG4 / MJPEG
1 LAN port up to 16 channels with a hub/switch
HDMI output 1920 x 1080 pixels manual / timer / motion / alarm live display, record, playback, backup and network input: only via IP cameras output: 1 audio output
22 x 18 grid per camera
10 adjustable variables with precise calculation for motion detection yes
V. 01 – 14/04/2014 11 ©Velleman nv
NVR4 backup device hard disk storage web interface
USB 2.0 backup and network remote backup built-in SATA type: supports 3 x HDD, supported HDD capacity to 3 TB
(HDD not incl.) external eSata: external hard disk or disk array (Linux system support) supports free CMS software (Windows & Mac OS) all major internet browsers via Java, QuickTime and VLC plug-in
(Internet Explorer, Firefox, Safari, Google Chrome) mobile surveillance – smart phones mobile surveillance – computer remote alarm notification network connection power source power consumption operating temperature system recovery
- app: iPad, iPod touch, iPhone, Android phone & tablet
- available on www.eagleeyescctv.com
- remote login via all smart phone platforms (Apple, Android,
BlackBerry, Nokia Symbian and Windows Mobile)
- CMS (Central Management System): remote surveillance to monitor up to 10 different IP addresses (Windows & Mac OS)
- web browser: Internet Explorer, Firefox, Google Chrome and Safari via Java, QuickTime or VLC plug-in
SMS message, e-mail and image uploading to FTP sites supports TCP/IP, PPPoE, DHCP and DDNS function
19 VDC / 3.42 A (incl.)
17.5 W (without a hard disk connected)
10 °C to 40 °C system auto recovery after power reconnected dimensions 432 x 90 x 326 mm
Use this device with original accessories only. Velleman nv cannot be held responsible in the event of damage or injury resulted from (incorrect) use of this device.
For more info concerning this product and the latest version of this manual, please visit our website www.velleman.eu.
The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved.
No part of this manual or may be copied, reproduced, translated or reduced to any electronic medium or otherwise without the prior written consent of the copyright holder.
V. 01 – 14/04/2014 12 ©Velleman nv
NVR4
KORTE HANDLEIDING
1.
Inleiding
Aan alle ingezetenen van de Europese Unie
Belangrijke milieu-informatie betreffende dit product
Dit symbool op het toestel of de verpakking geeft aan dat, als het na zijn levenscyclus wordt weggeworpen, dit toestel schade kan toebrengen aan het milieu. Gooi dit toestel (en eventuele batterijen) niet bij het gewone huishoudelijke afval; het moet bij een gespecialiseerd bedrijf terechtkomen voor recyclage. U moet dit toestel naar uw verdeler of naar een lokaal recyclagepunt brengen. Respecteer de plaatselijke milieuwetgeving.
Hebt u vragen, contacteer dan de plaatselijke autoriteiten betreffende de verwijdering.
Dank u voor uw aankoop! Lees deze handleiding grondig voor u het toestel in gebruik neemt. Werd het toestel beschadigd tijdens het transport, installeer het dan niet en raadpleeg uw dealer.
2.
Veiligheidsinstructies
Houd dit toestel buiten het bereik van kinderen en onbevoegden.
Elektrocutiegevaar bij het openen van het toestel. Raak geen kabels aan die onder stroom staan, om dodelijke elektroschokken te vermijden.
Trek de stekker uit het stopcontact voordat u het toestel reinigt of als u het niet gebruikt. Houd de voedingskabel altijd vast bij de stekker en niet bij de kabel.
3.
Algemene richtlijnen
Raadpleeg de Velleman® service- en kwaliteitsgarantie achteraan deze handleiding.
Gebruik het toestel enkel binnenshuis. Bescherm het toestel tegen regen, vochtigheid en opspattende vloeistoffen. Plaats geen objecten gevuld met vloeistof op of naast het toestel.
Bescherm dit toestel tegen stof en extreme temperaturen. Zorg dat de verluchtingsopeningen niet verstopt geraken. Voor voldoende luchtcirculatie, laat een minimumafstand van 2.5 cm tussen het toestel en elk ander object.
Bescherm tegen schokken. Vermijd brute kracht tijdens de bediening.
• Leer eerst de functies van het toestel kennen voor u het gaat gebruiken.
• Om veiligheidsredenen mag u geen wijzigingen aanbrengen. Schade door wijzigingen die de gebruiker heeft aangebracht aan het toestel valt niet onder de garantie.
• Gebruik het toestel enkel waarvoor het gemaakt is. De garantie vervalt automatisch bij ongeoorloofd gebruik.
• De garantie geldt niet voor schade door het negeren van bepaalde richtlijnen in deze handleiding en uw dealer zal de verantwoordelijkheid afwijzen voor defecten of problemen die hier rechtstreeks verband mee houden.
• Bewaar deze handleiding voor verdere raadpleging.
• Installeer en gebruik deze camera NIET voor illegale praktijken en respecteer ieders privacy.
4.
Eigenschappen
• Full HD-opname
• opnamecapaciteit: 16 kanalen
• 1920 x 1080 pixels (Full HD): 480 IPS, 120 Mbps
• bewaking op afstand via de gratis EagleEyes-software op iPhone, iPad en Android
• aansluiting met draagbaar toestel via GPRS, 3G of wifi
• display met grafische gebruikersinterface (GUI) en USB-muis
• hoge compatibiliteit en off-site back-up: o
compatibel met de voornaamste IP-camera's die ONVIF-gecertificeerd zijn
V. 01 – 14/04/2014 13 ©Velleman nv
NVR4 o
eATA-interface, om een disk-array aan te sluiten (met max. 4-bay voor Raid 0 of Raid 1) o
werkt met de gratis CMS-software (Central Management System) voor off-site back-ups
• lokale controle en controle op afstand, volledig onafhankelijk
• HDMI-uitvoerresolutie tot 1080P
• automatische geïntegreerde dynamische domeinnaamservice (DDNS): gratis
• USB-muis: meegelev.
• IR-afstandsbediening: meegelev.
Optioneel
• harde schijf: HD500GB/S, HD1TB/S, HD2TB/S
• monitor: MONSCA9
• HDMI-kabel: PAC400Tx-reeks en PAC400Gx-reeks
• compatibele IP-camera's: CAMIP16, CAMIP17, CAMIP18, CAMIP19
• router: EM4544, EM4543, EM4571, PCRT1
5.
Omschrijving
Frontpaneel alarm wan
SATA lan
HDD1 naar HDD5
USB-poort muispoort
Achterpaneel
Led-indicator: een alarm doet zich voor
Led-indicator: de NVR is verbonden met internet
Led-indicator: de NVR is verbonden met het LAN-netwerk
Led-indicator: SATA-harde schijf is actief
Led-indicator: er zijn 5 harde schijven geïnstalleerd en correct aangesloten
(3 harde schijven met quick-lock-installatie)
Sluit een compatibele USB flash drive voor videoback-up aan.
Opmerking: Voor de lijst met compatibele USB flash drives, raadpleeg de volledige handleiding op de CD-ROM.
Sluit een muis aan (meegeleverd).
1
2
3
4
5
6
7
1 2 3
AUDIO OUT
HDMI-uitvoerpoort
Externe I/O eSATA
WAN
LAN
DC 19V IN
4 5 6 7
Verbind met de Audio Line-ingang van een versterker.
Sluit aan op een monitor die HDMI voor high-definition video-uitgang ondersteunt.
Opmerking: Gebruik een geschikte adapter (niet meegelev.) om een monitor die
VGA of composiet ondersteunt, aan te sluiten.
RS 485-poort
Deze poort wordt gebruikt om een opslagapparaat aan te sluiten dat eSATAinterface ondersteunt; bijv. een externe disk-array.
Verbind de NVR met internet via een 8P8C-netwerkkabel (RJ45)
Verbind de NVR met lokale IP-camera’s via een 8P8C-netwerkkabel (RJ45).
Verbind de NVR met de voedingsadapter (meegelev.).
V. 01 – 14/04/2014 14 ©Velleman nv
NVR4
6.
Een harde schijf (HDD) installeren
Voorbereiding
• Zorg ervoor dat u het toestel ontkoppelt van het lichtnet. Raak geen elektronische circuits aan om elektrische schokken te voorkomen.
• Gebruik een compatibele harde schijf (niet meegelev.), type SATA (Serial Advanced Technology
Attachment). Formatteer eerst de harde schijf.
• U kunt tot 3 harde schijven installeren met het quick-lock-systeem (zie onder).
• Indien u een groene harde schijf wilt gebruiken, gebruik dan alleen een schijf die speciaal ontworpen is voor bewaking om ervoor te zorgen dat het toestel correct functioneert.
1.
Schroef de bovenkant los en verwijder het deksel.
2.
Zoek de connector [1] en beugel [2] voor de harde schijf in het toestel. De schroeven zijn aan de beugel bevestigd.
3.
Houd de harde schijf met de printplaat naar beneden, lijn de harde schijf met de voedings- en sata-poort uit en plaats de harde schijf.
4.
Bevestig de harde schijf aan de beugel met de ingebouwde schroeven.
7.
Aansluitdiagram
• U kunt tot 16 IP-camera’s aansluiten.
• Sluit eerst de IP-camera's aan en schakel ze in, om ervoor te zorgen dat de automatische configuratie correct functioneert. Schakel daarna pas de NVR in.
• Dit toestel vereist een basiskennis van netwerkinstallaties.
• Verbind de NVR met het internet om toegang te krijgen tot de NVR via uw draagbaar toestel of laptop. Voor meer informatie, raadpleeg de handleiding op www.surveillance-download.com/user/network_setup/network_setup_recorder.pdf.
De IP-camera aansluiten (Plug-and-Play)
Raadpleeg de afbeeldingen op pagina 2 voor het aansluitdiagram.
V. 01 – 14/04/2014 15 ©Velleman nv
NVR4
1.
Verbind de camera met een hub/switch.
2.
Wacht tot de camera automatisch geconfigureerd is en de beelden op het scherm verschijnen.
Opmerkingen
De NVR configureert het IP-adres van een ETS-camera die verbonden is via LAN automatisch als:
• de aangesloten IP-camera ons merk is.
• de standaard IP-configuratiemethode van de camera DHCP is (standaardinstelling).
• de camera voor de NVR ingeschakeld is.
8.
Informatie en menu's
Toetsvergrendeling
In het statusmenu, klik op (vergrendelen) om de bediening van de videorecorder te vergrendelen, of klik op (ontgrendelen) om de bediening weer vrij te geven. Wanneer u de bediening weer vrijgeeft, moet u een gebruikersnaam en wachtwoord ingeven.
Opmerking: De standaard gebruikersnaam en wachtwoord zijn "admin". Verschillende gebruikers hebben verschillende toegangsrechten. Raadpleeg de volledige handleiding (beschikbaar op de CD-ROM) voor meer informatie.
8.2
NVR- en netwerkstatus
De statuspictogrammen voor NVR en netwerk worden rechtsboven in het scherm weergegeven (naast de beschikbare ruimte op de harde schijf).
De weergegeven pictogrammen kunnen afwijken, afhankelijk van de toegangsrechten van de gebruiker.
De mogelijke pictogrammen zijn:
NVR-status toetsvergrendeling kanaal vergrendeld
USB flash drive / apparaat aangesloten timer-opname ingeschakeld functie overschrijven ingeschakeld sequentiemodus ingeschakeld
PTZ-modus ingeschakeld
CPU-belasting ontgrendeld kanaalvergrendeling ontgrendeld geen USB-apparaat aangesloten timer-opname uitgeschakeld functie overschrijven uitgeschakeld sequentiemodus uitgeschakeld
PTZ-modus uitgeschakeld
Netwerkstatus
(WAN) met internet verbonden
(WAN) lokale verbinding
(LAN) auto-modus - Mbit/s
(LAN) DHCP / statische IP-modus
(WAN) niet met internet verbonden
(LAN) auto-modus - Gbit/s
(LAN) camera niet aangesloten
Kanaalstatus
De pictogrammen worden op elk kanaal op het scherm weergegeven. De mogelijke pictogrammen zijn:
V. 01 – 14/04/2014 16 ©Velleman nv
NVR4 automatisch zoeken ingeschakeld live-geluid ingeschakeld geluid afspelen ingeschakeld originele grootte opname actief automatisch zoeken uitgeschakeld geluid uitgeschakeld geluid afspelen uitgeschakeld passend op scherm menselijke aanwezigheid wordt gedetecteerd beweging wordt gedetecteerd afspelen van opgenomen beelden een alarm doet zich voor live-beelden
Snelmenubalk
Beweeg de pijl naar links in het scherm, om de snelmenubalk weer te geven. Deze geeft de volgende pictogrammen weer:
Klik om het kanaalkeuzevenster weer te geven en het gewenste kanaal te selecteren.
Klik om het afspeelpaneel weer te geven. In het controlepaneel:
Klik op om de laatste video-opname af te spelen.
Klik op om de zoeklijst te openen.
Klik om het IP-zoekvenster te openen en de verbindingsstatus van elk kanaal te controleren.
Klik om het uitschakelmenu weer te geven en het apparaat uit te schakelen of opnieuw op te starten.
Hoofdmenu
Klik met de rechtermuisknop eender waar op het scherm, om het hoofdmenu te openen. Klik nogmaals met de rechtermuisknop om het menu te verbergen.
Pictogram Naam
Quick start
Opties
Channel Title, Event Status, Date Display, Mouse Sensitivity, Record
Config.
Account, Tools, System Info, Backup Schedule, Online, Regular Report System
Event information
Advanced config
Schedule setting
Weergavemenu
Quick Search, Event Search, HDD Info, Event Log
Connection, Camera, Detection, Alert, Network, Display, Record, Notify,
Multicasting
Event Timer, Record Timer
Open de snelmenubalk (zie boven), om het weergavemenu te openen en klik op . snel vooruit snel achteruit afspelen/pauze
Klik om versneld vooruit af te spelen aan 4 tot 32 keer de normale snelheid.
Klik om versneld achteruit af te spelen aan 4 tot 32 keer de normale snelheid.
Klik om de laatste video-opname af te spelen. Klik opnieuw om te onderbreken.
In pauzemodus, klik één keer op om één beeldje vooruit te springen of klik op om één beeldje achteruit te gaan.
V. 01 – 14/04/2014 17 ©Velleman nv
NVR4 stoppen vertraagd afspelen vorige/volgende uur snel zoeken
Klik om de video-opname te stoppen.
Klik één keer om de opname af te spelen aan 1/4 van de normale snelheid, klik twee keer om de opname aan 1/8 van de normale snelheid af te spelen.
Klik om naar het vorige/volgende interval van één uur te springen
(bijvoorbeeld, 11:00 ~ 12:00 of 14:00 ~ 15:00) en de eerste videoopname in dat tijdsinterval af te spelen.
Klik om het menu te openen.
9.
Configuratie via LAN (Plug-and-Play)
Opmerking: Deze configuratie is geschikt voor ETS-camera's.
Automatische configuratie
De NVR configureert het IP-adres van een ETS-camera die verbonden is via LAN automatisch als:
• de standaard IP-configuratiemethode van de camera DHCP is.
• de camera voor de NVR ingeschakeld is.
Is dit niet het geval, configureer het IP-adres van uw camera manueel (zie onder).
Manuele configuratie
Configureert de NVR het IP-adres van uw camera niet automatisch (zie boven), dan is de standaard IPconfiguratiemethode van uw camera niet ingesteld op DHCP. Om dit probleem op te lossen, moet u het IPadres van de camera opnieuw configureren naar 10.1.1.xx (met xx binnen het bereik 11 ~ 253), in hetzelfde netwerksegment als de NVR.
1.
In de snelmenubalk, klik op . Een lijst van alle aangesloten IP-camera's met de verbindingsstatus en
MAC-adres wordt weergegeven.
2.
Selecteer een IP-adres dat niet gebruikt (UNUSED)wordt en klik op SETUP.
3.
Selecteer STATIC in NETWORK TYPE en verander het IP-adres in 10.1.1.xx (met xx binnen het bereik 11 ~
253).
4.
Klik op APPLY en EXIT om de wijzigingen op te slaan.
5.
Wacht tot de NVR de IP-camera detecteert en de beelden weergeeft.
V. 01 – 14/04/2014 18 ©Velleman nv
NVR4
Een camera met internetverbinding instellen
Via internet kunnen beelden van een IP-camera opgenomen worden.
1.
Zorg ervoor dat de IP-camera toegankelijk is buiten het LAN-netwerk waaraan ze verbonden is. Dit kan via een dynamische domeinnaam (bijvoorbeeld ip_officd.ddns.eagleeyes.tw).
2.
In het hoofdmenu, klik op (ADVANCED CONFIG) en selecteer CONNECTION.
3.
Om een kanaal aan een IP-camera toe te wijzen, klik op URI en geef het IP-adres en poortnummer van de camera in.
4.
Klik op SETUP, om de toegangsinformatie van de camera in te geven.
5.
Geef de gebruikersnaam (USER NAME) en het wachtwoord (PASSWORD) in, om toegang te krijgen tot de
IP-camera.
6.
Klik op GET TYPE om de camera te detecteren en contro leer of de toegangsinformatie correct is.
7.
Kies de beeldgrootte (IMAGE SIZE), de beeldkwaliteit (QUALITY) en het aantal beelden per seconde
(I.P.S.).
Opmerking: De beschikbare opties zijn afhankelijk van het type camera dat u wilt aansluiten.
8.
Klik op GET TYPE om de camera te detecteren en controleer of de toegangsinformatie correct is.
9.
Optioneel: voor een camera met geluidsopname, stel AUDIO in op ON of OFF.
10.
Snelmenubalk
In/uitschakelen en opnieuw opstarten
Om de NVR uit te schakelen of opnieuw op te starten:
• In de snelmenubalk, klik op en klik daarna op (uitschakelen) of
Een kanaal op volledig scherm bekijken
Om een kanaal op volledig scherm te bekijken, gaat u als volgt te werk:
• Klik direct op het kanaalbeeld om het kanaal op volledig scherm te bekijken.
Dubbelklik op het beeld om naar de vorige weergave terug te keren.
- of -
1.
In de snelmenubalk, klik op .
(opnieuw opstarten).
V. 01 – 14/04/2014 19 ©Velleman nv
NVR4
2.
Op het controlepaneel dat verschijnt, kies het kanaal dat u op het volledige scherm wilt weergeven.
3.
Klik op de knop 4 – 6 - 9 - 12 of 16 om een andere weergave te selecteren.
Opgenomen video's afspelen
1.
Zorg ervoor dat de manuele en/of weergave van een event geactiveerd is: in het hoofdmenu [19], klik op
(ADVANCED CONFIG) en selecteer RECORD om de instellingen te controleren of aan te passen.
2.
In het weergavemenu, klik op de afspeelknop . De opgenomen bestanden worden weergegeven.
3.
De knoppen snel vooruit en snel achteruit verhogen/verlagen de afspeelsnelheid. Klik meermaals op de knop om de snelheid 4x, 8x, 16x, of 32x (max.) te verhogen/verlagen.
4.
Klik op om de opname te onderbreken.
5.
Klik op om de opname te stoppen en naar de live-weergave terug te keren.
11.
Push Status
De push status-functie stuurt een bericht naar de EagleEyes-app op uw draagbaar toestel van zodra er zich een alarm voordoet. U kunt de events selecteren waarvoor u een bericht wilt ontvangen.
Vereisten
Voor u deze functie gebruikt, controleer of:
• U een iPhone, iPad of Android™-smartphone of tablet hebt.
• Mobiele internetdiensten zijn ingeschreven en beschikbaar om te gebruiken vanaf uw draagbaar toestel.
• De mobiele app, EagleEyes-app geïnstalleerd is op uw draagbaar toestel.
Voor meer informatie, zie "De EagleEyes-app installeren" (onder).
De WAN-poort instellen
1.
Controleer of de NVR correct aangesloten is op een netwerkswitch via een RJ45-netwerkkabel.
2.
Op de NVR, selecteer ADVANCED CONFIG > NETWORK > WAN.
Push status configureren
Voor u push status configureert, zorg ervoor dat:
• De NVR ingesteld is zoals beschreven hierboven.
• De NVR aangesloten is op het internet.
Op de NVR
1.
Selecteer ADVANCED CONFIG > NOTIFY > PUSH STATUS.
2.
Stel ACTION in op ON.
3.
Selecteer de events waarvoor u een bericht wilt ontvangen.
V. 01 – 14/04/2014 20 ©Velleman nv
NVR4
Op uw draagbaar toestel
• Activeer "Notifications" in EagleEyes.
• Raadpleeg de installatiehandleiding op www.velleman.eu
of ga naar www.eagleeyescctv.com voor meer informatie over EagleEyes.
Testen
1.
Activeer een alarm.
Bijvoorbeeld, stel VIDEO LOSS is als een event en ontkoppel de video om te controleren of u een push status-bericht ontvangt.
11.2
De EagleEyes-applicatie installeren
Vereisten
Voordat u EagleEyes voor bewaking op afstand installeert op uw draagbaar toestel, controleer het volgende:
• Mobiele internetdiensten zijn ingeschreven en beschikbaar om te gebruiken vanaf uw draagbaar toestel.
• Opmerking: De kosten voor internettoegang via draadloze of 3G-netwerken kunnen mogelijk in rekening worden gebracht. Voor toegangstarieven tot het internet, neem contact op met uw lokale netwerk- of serviceprovider.
• U hebt het IP-adres, poortnummer, gebruikersnaam en wachtwoord genoteerd om toegang te krijgen tot uw netwerkcamera via het internet.
De software downloaden
1.
Ga naar www.eagleeyescctv.com vanaf uw draagbaar toestel en log in.
Download EagleEyes niet vanaf uw computer. o
Voor Android, selecteer de download-link van de website. o
Voor iPhone en iPad zijn er 2 EagleEyes-versies beschikbaar: EagleEyesHD Plus (betalend) en
EagleEyesHD Lite (gratis).
2.
Selecteer de gewenste versie en u wordt naar de App Store doorgestuurd om de applicatie te downloaden.
3.
Na het downloaden wordt EagleEyes automatisch geïnstalleerd op de locatie waar alle toepassingen standaard in uw telefoon zijn opgeslagen of een door u opgegeven locatie.
12.
Technische specificaties
videocompressie video-ingang video-uitgang opnamemodus multiplex-werking audio I/O: detectiebereik detectiegevoeligheid pre-alarmopname
H.264 / MPEG / MJPEG
1 LAN-poort, tot 16 kanalen via hub/switch
HDMI-uitvoer 1920 x 1080 pixels manueel / timer / beweging / alarm live-weergave, opname, afspelen, back-up en netwerk ingang: enkel via IP-camera's uitgang: 1 audio-uitgang raster van 22 x 18 per camera
10 instelbare variabelen met precisieberekening voor bewegingsdetectie ja
V. 01 – 14/04/2014 21 ©Velleman nv
NVR4 back-uptoestel opslag op harde schijf webinterface
USB 2.0 back-up en back-up via netwerk ingebouwd SATA-type: ondersteunt 3 x HDD, ondersteunt HDD van meer dan 3 TB (harde schijf niet meegelev.) externe eSATA: externe harde schijf of disk-array (ondersteunt Linuxsysteem) ondersteunt de gratis CMS-software (Windows & Mac OS) alle belangrijke internetbrowsers via Java, QuickTime en VLC plug-in
(Internet Explorer, Firefox, Safari, Google Chrome) bewaking op afstand – smartphones - app: iPad, iPod touch, iPhone, Android-smartphone en tablet
- beschikbaar op www.eagleeyescctv.com bewaking op afstand – computer
- login op afstand vanaf alle smartphoneplatforms (Apple, Android,
BlackBerry, Nokia Symbian en Windows Mobile)
- CMS (Central Management System): bewaking op afstand tot 10 IPadressen (Windows & Mac OS)
- webbrowser: Internet Explorer, Firefox, Google Chrome en Safari via
Java, Quicktime of VLC plug-in alarmbericht op afstand netwerkverbinding voeding verbruik werktemperatuur systeemherstel
SMS, e-mail en uploaden van beelden naar FTP-sites ondersteunt TCP/IP, PPPoE, DHCP en DDNS
19 VDC / 3.42 A (meegelev.)
17.5 W (zonder harde schijf)
10 °C tot 40 °C automatisch systeemherstel na stroomonderbreking afmetingen 432 x 90 x 326 mm
Gebruik dit toestel enkel met originele accessoires. Velleman nv is niet aansprakelijk voor schade of kwetsuren bij (verkeerd) gebruik van dit toestel.
Voor meer informatie over dit product en de laatste versie van deze handleiding, zie www.velleman.eu.
De informatie in deze handleiding kan te allen tijde worden gewijzigd zonder voorafgaande kennisgeving.
© AUTEURSRECHT
Velleman nv heeft het auteursrecht voor deze handleiding. Alle wereldwijde rechten voorbehouden.
Het is niet toegestaan om deze handleiding of gedeelten ervan over te nemen, te kopiëren, te vertalen, te bewerken en op te slaan op een elektronisch medium zonder voorafgaande schriftelijke toestemming van de rechthebbende.
V. 01 – 14/04/2014 22 ©Velleman nv
NVR4
GUIDE D'INSTALLATION RAPIDE
1.
Introduction
Aux résidents de l'Union européenne
Informations environnementales importantes concernant ce produit
Ce symbole sur l'appareil ou l'emballage indique que l'élimination d'un appareil en fin de vie peut polluer l'environnement. Ne pas jeter un appareil électrique ou électronique (et des piles éventuelles) parmi les déchets municipaux non sujets au tri sélectif; une déchetterie traitera l'appareil en question.
Renvoyer cet appareil à votre fournisseur ou à un service de recyclage local. Il convient de respecter la réglementation locale relative à la protection de l'environnement.
En cas de doute, contacter les autorités locales pour élimination.
Nous vous remercions de votre achat ! Lire le présent mode d'emploi attentivement avant la mise en service de l'appareil. Si l'appareil a été endommagé pendant le transport, ne pas installer et consulter votre revendeur.
2.
Consignes de sécurité
Garder l'appareil hors de la portée des enfants et des personnes non autorisées.
risque d’électrocution lors de l’ouverture du boîtier. Toucher un câble sous tension peut causer des
électrochocs mortels.
Toujours débrancher l’appareil s’il n’est pas utilisé et avant le nettoyage ou l'entretien. Tirer sur la fiche pour débrancher l'appareil ; non pas sur le câble.
3.
Directives générales
Se référer à la garantie de service et de qualité Velleman® en fin de ce mode d'emploi.
Utiliser cet appareil uniquement à l'intérieur. Protéger de la pluie, de l’humidité et des projections d’eau. Ne jamais placer d’objets remplis de liquides au-dessus ou à proximité de l’appareil.
Protéger contre la poussière et les températures extrêmes. Veiller à ce que les fentes de ventilation ne soient pas bloquées. Laisser une distance d'au moins de 2.5 cm entre l’appareil et tout autre objet.
Protéger l’appareil des chocs. Traiter l'appareil avec circonspection pendant l’opération.
• Se familiariser avec le fonctionnement de l'appareil avant de l'utiliser.
• Il est interdit de modifier l'appareil pour des raisons de sécurité. Les dommages occasionnés par des modifications par le client ne tombent pas sous la garantie.
• N’utiliser l'appareil qu’à sa fonction prévue. Un usage impropre annule d'office la garantie.
• Les dommages occasionnés par des modifications à l'appareil par le client, ne tombent pas sous la garantie et votre revendeur déclinera toute responsabilité pour les problèmes et les défauts qui en résultent.
• Garder ce mode d'emploi pour toute référence ultérieure.
• Installer et utiliser la caméra en respectant la législation et la vie privée des tiers.
4.
Caractéristiques
• enregistrement vidéo en full HD
• capacité d'enregistrement : 16 canaux
• 1920 x 1080 pixels (full HD) : 480 IPS, 120 Mbps
• surveillance à distance depuis le logiciel EagleEyes gratuit sur iPhone, iPad et Android
• connexion avec téléphone mobile via GPRS, 3G ou wifi
• affichage GUI (Graphical User Interface) et pilotage par souris USB
• haute compatibilité et sauvegarde à distance : o
compatible avec les principales marques de caméras IP certifiées ONVIF o
interface eSATA pour connecter une matrice pour disque dur (avec max. 4 baies pour RAID 0 et 1) o
compatible avec le logiciel Central Management System (CMS) gratuit pour sauvegardes à distance
V. 01 – 14/04/2014 23 ©Velleman nv
NVR4
• contrôle local et contrôle à distance, complètement autonome
• résolution de sortie HDMI jusqu'à 1080p
• service dynamique de noms de domaine (DDNS) : gratuit
• souris USB : incl.
• télécommande IR : incl.
Optionnel
• disque dur : HD500GB/S, HD1TB/S, HD2TB/S
• moniteur : MONSCA9
• câble HDMI : séries PAC400Tx et PAC400Gx
• caméras IP compatibles : CAMIP16, CAMIP17, CAMIP18, CAMIP19
• routeur : EM4544, EM4543, EM4571, PCRT1
5.
Description
Panneau frontal alarme wan
SATA lan
HDD1 à HDD5
Port USB
Port souris
Panneau arrière
Indicateur LED : le système détecte une alarme
Indicateur LED : l'enregistreur est connecté à l'internet
Indicateur LED : le NVR est connecté au réseau LAN
Indicateur LED : le disque dur SATA est activé
Indicateur LED : 5 disques durs sont installés et connectés correctement
(3 disques durs avec installation quick-lock)
Connecter une clé USB pour des sauvegardes.
Remarque : Pour la liste de clés USB compatibles, consulter le mode d'emploi complet sur le CD-ROM.
Connecter une souris (incl.).
1
2
3
4
5
6
7
1 2 3
AUDIO OUT
Port de sortie vidéo
HDMI
External I/O eSATA
WAN
LAN
DC 19V IN
4 5 6 7
Pour la connexion à l'entrée ligne audio d'un amplificateur.
Pour la connexion à un moniteur supportant HDMI pour sortie vidéo à haute définition (port HDMI).
Remarque : Utiliser un adaptateur secteur approprié (non incl.) pour connecter un moniteur supportant VGA ou Composite.
Port RS 485
Pour la connexion d'un périphérique de stockage supportant l'interface eSATA ; p. ex. une matrice externe pour disque dur.
Pour la connexion à l'internet avec un câble réseau 8P8C (RJ45).
Pour la connexion à des caméras IP locales avec un câble réseau 8P8C (RJ45).
Pour la connexion à un adaptateur réseau (incl.).
V. 01 – 14/04/2014 24 ©Velleman nv
6.
Installer un disque dur (HDD)
NVR4
Préparations
• Déconnecter d'abord l'appareil du secteur. Ne pas toucher aux circuits électriques pour éviter toute décharge électrostatique.
• Connecter à un disque dur compatible (non incl.), type SATA. Si nécessaire, formater le disque dur.
• Il est possible d'installer jusqu'à 3 disques durs par le système quick-lock (voir ci-dessous).
• En cas d'usage d'un disque dur vert, utiliser uniquement un disque conçu spécialement pour la surveillance afin d'assurer un fonctionnement correct de l'appareil.
1.
Dévisser et enlever le couvercle supérieur.
2.
Localiser le connecteur du disque dur [1] et son support [2] dans l'appareil. Les vis sont fixées au support.
3.
Installer le disque dur avec le circuit imprimé vers le bas et aligner le disque dur avec le port d'alimentation et sata.
4.
Fixer le disque dur au support avec les vis intégrées.
7.
Schéma de connexion
• Il est possible de connecter jusqu'à 16 caméras IP.
• Pour s'assurer que la configuration automatique fonctionne correctement, connecter et allumer les caméras
IP. Puis, allumer le NVR.
• Cet appareil requiert une connaissance minimale sur l'installation de réseaux.
• Pour accéder au NVR avec votre appareil mobile ou ordinateur portable, connecter le NVR à l'internet. Pour plus d'informations, consulter www.surveillance-download.com/user/network_setup/network_setup_recorder.pdf.
Connecter la caméra IP (Plug and Play)
Pour le schéma de connexion, se référer aux illustrations en page 2.
1.
Connecter la caméra à un hub/commutateur.
2.
Attendre jusqu'à ce que la caméra soit configurée automatiquement et que les images s'affichent à l'écran.
V. 01 – 14/04/2014 25 ©Velleman nv
NVR4
Remarques
Le NVR configurera automatiquement l'adresse IP d'une caméra ETS connectée par LAN si :
• La caméra IP connectée est notre marque de caméra IP.
• La méthode de configuration IP par défaut de la caméra est DHCP (réglage par défaut).
• La caméra est activée avant d'allumer l'enregistreur.
8.
Information et menus
Verrouiller / déverrouiller l'appareil
Dans le menu d'état, cliquer sur (verrouiller) ou sur (déverrouiller) pour verrouiller ou déverrouiller le
NVR. Introduire un nom d'utilisateur et le mot de passe pour déverrouiller le NVR.
Remarque : Le nom d'utilisateur et mot de passe par défaut sont " admin ". Différents types d'utilisateurs ont différents droits d'accès aux fonctions. Pour obtenir plus d'informations, consulter le mode d'emploi complet sur le CD-ROM.
8.2
NVR et état du réseau
Les icônes d'état pour le NVR et le réseau sont affichés en haut à droite de l'écran (à côté de l'espace disponible sur le disque dur).
Les icônes affichés peuvent varier selon les droits d'accès de l'utilisateur.
Les icônes :
Etat du NVR le clavier est verrouillé les canaux sont verrouillés clé USB / appareil USB est connecté l'enregistrement temporisé est activé la fonction écraser est activée l'affichage séquentiel est activé le mode PTZ est activé charge CPU le NVR est déverrouillé les canaux sont déverrouillés pas d'appareil USB connecté l'enregistrement temporisé est désactivé la fonction écraser est désactivée l'affichage séquentiel est désactivé le mode PTZ est désactivé
Etat du réseau
(WAN) connexion à l'internet
(WAN) connexion locale
(LAN) mode automatique - Mbit/s
(LAN) DHCP / mode IP statique
(WAN) Internet déconnecté
(LAN) mode automatique - Gbit/s
(LAN) caméra déconnectée
Etat des canaux
Les icônes du canal sont affichés sur chaque canal. Les icônes : la fonction "recherche automatique" est activée la fonction "recherche automatique" est désactivée la fonction "audio en direct" est activée la fonction "audio" est désactivée
V. 01 – 14/04/2014 26 ©Velleman nv
NVR4 la fonction "lecture audio" est activée format original enregistrement alarme informations en direct la fonction "lecture audio" est désactivée ajuster à l'écran détection de personnes détection de mouvements lecture des informations
Barre de menu rapide
Pour accéder à la barre de menu rapide, pointer la souris sur la flèche à gauche de l'écran. Celle-ci contient les icônes suivants :
Cliquer pour afficher la fenêtre de sélection de canaux et sélectionner le canal souhaité.
Cliquer pour afficher le panneau de lecture. Sur le panneau de contrôle :
Cliquer sur pour lire la dernière vidéo enregistrée
Cliquer sur pour ouvrir la liste de recherche.
Cliquer pour ouvrir la fenêtre de recherche IP et pour vérifier l'état de connexion de chaque canal.
Cliquer pour afficher l'icône de désactivation et pour éteindre ou réinitialiser l'appareil.
Menu principal
Pour accéder au menu, cliquer avec le bouton droit de la souris sur une partie quelconque de l'écran. Cliquer de nouveau pour masquer le menu.
Icône Nom Options
Quick start Channel Title, Event Status, Date Display, Mouse Sensitivity, Record Config.
System Account, Tools, System Info, Backup Schedule, Online, Regular Report
Event information
Quick Search, Event Search, HDD Info, Event Log
Advanced config
Connection, Camera, Detection, Alert, Network, Display, Record, Notify,
Multicasting
Schedule setting
Event Timer, Record Timer
Menu de lecture
Pour accéder au menu de lecture, ouvrir la barre de menu rapide (voir ci-dessus) et cliquer sur . avancer reculer lecture / pause
Cliquer pour avancer à une vitesse entre 4 et 32 fois plus rapide que la vitesse normale.
Cliquer pour reculer à une vitesse entre 4 et 32 fois plus rapide que la vitesse normale.
Cliquer pour lire la dernière vidéo enregistrée. Cliquer de nouveau pour interrompre.
En mode pause, cliquer une fois sur pour avancer image par image ou cliquer sur pour reculer image par image. arrêter lecture au ralenti
Cliquer pour arrêter la lecture.
Cliquer une fois pour une lecture à ¼ de la vitesse normale, doublecliquer pour une lecture à 1/8 de la vitesse normale.
V. 01 – 14/04/2014 27 ©Velleman nv
NVR4 heure précédente/suivante recherche rapide
Cliquer pour passer à l'intervalle précédente/suivante d'une heure (p. ex., 11:00 ~ 12:00 ou 14:00 ~ 15:00) et lire la première vidéo enregistrée durant cet intervalle.
Cliquer pour accéder au menu de recherche rapide.
9.
Configurer la caméra sur un port LAN (Plug and Play)
Remarque : Cette méthode de configuration s'applique aux caméras ETS.
Configuration Automatique
Le NVR configurera automatiquement l'adresse IP d'une caméra ETS connectée par LAN si :
• La méthode de configuration IP par défaut de la caméra est DHCP.
• La caméra est activée avant d'allumer l'enregistreur.
Si ce n'est pas le cas, il est possible de configurer l'adresse IP de la caméra manuellement (voir ci-après).
Configuration manuelle
Si le NVR ne configure pas l'adresse IP de la caméra automatiquement (voir ci-dessus), il est possible que la méthode de configuration IP par défaut de la caméra IP ne soit pas réglée sur DHCP. Pour résoudre cela, régler l'adresse IP de la caméra sur 10.1.1.xx (xx entre 11~ 253), dans la même segmentation réseau que l'enregistreur.
1.
Dans la barre de menu rapide, cliquer sur . Une liste s'affiche de toutes les caméras IP connectées avec l'état de connexion et l'adresse MAC.
2.
Sélectionner une adresse IP qui n'est pas utilisée (UNUSED) et cliquer sur SETUP.
3.
Sélectionner STATIC dans NETWORK TYPE et changer l'adresse IP en 10.1.1.xx (xx range de 11 ~ 253).
4.
Cliquer sur APPLY et EXIT pour sauvegarder les modifications.
5.
Attendre jusqu'à ce que le NVR détecte la caméra IP et affiche des images.
Configurer une caméra avec connexion depuis l'internet
Il est possible d'enregistrer des images par le réseau depuis une caméra IP.
1.
S'assurer que la caméra IP est accessible hors du réseau LAN par DDNS (par exemple ip_office.ddns.eagleeyes.tw).
V. 01 – 14/04/2014 28 ©Velleman nv
NVR4
2.
Dans le menu principal [19], cliquer sur (ADVANCED CONFIG) et sélectionner CONNECTION.
3.
Pour assigner un canal à une caméra IP à distance, cliquer sur URI pour introduire l'adresse de la caméra et le numéro de port.
4.
Cliquer sur SETUP pour introduire l'information d'accès de la caméra.
5.
Introduire le nom d'utilisateur (USER NAME) et mot de passe (PASSWORD) pour accéder à la caméra IP.
6.
Cliquer sur GET TYPE pour détecter la caméra et s'assurer que l'information d'accès est correcte.
7.
Sélectionner le format d'image (IMAGE SIZE), la qualité d'image (QUALITY) et le nombre d'images par seconde (I.P.S.).
Remarque : Les options disponibles dépendent du type de caméra que vous souhaitez connecter.
8.
Cliquer sur GET TYPE pour détecter la caméra et s'assurer que l'information d'accès est correcte.
9.
Optionnel: pour une caméra avec enregistrement audio, régler AUDIO sur ON ou OFF.
10.
Barre de menu rapide
Allumer/éteindre et réinitialiser
Pour éteindre ou redémarrer le NVR :
• Dans la barre de menu rapide, cliquer sur et ensuite sur (éteindre) ou sur (redémarrer).
Visualiser un canal en mode plein écran (Full-Screen)
Pour visualiser un canal en mode plein écran, procéder comme suit :
• Cliquer directement sur l'image du canal.
Double-cliquer sur l'image pour retourner à l'affichage précédent.
- ou -
1.
Dans la barre de menu rapide, cliquer sur .
2.
Dans le panneau de contrôle qui s'affiche, sélectionner le canal que vous souhaitez afficher en mode plein
écran.
3.
Cliquer sur les boutons 4 – 6 - 9 - 12 ou 16 pour sélectionner un autre affichage.
V. 01 – 14/04/2014 29 ©Velleman nv
NVR4
Lire les vidéos enregistrées
1.
S'assurer d'activer l'enregistrement manuel et/ou l'enregistrement d'événements : dans le menu principal, cliquer sur (ADVANCED CONFIG) et sélectionner RECORD pour vérifier ou modifier les réglages.
2.
Dans le menu de lecture, appuyer sur le bouton de lecture . Les fichiers enregistrés s'affichent
3.
Avec le bouton avancer et reculer , la vitesse de lecture peut être augmentée/diminuée. Appuyer plusieurs fois sur le bouton pour augmenter/diminuer la vitesse 4x, 8x, 16x, ou 32x (max.).
4.
Appuyer sur pour interrompre la lecture.
5.
Appuyer sur pour arrêter la lecture et pour retourner à l'affichage en direct.
11.
Push Status
La fonction push status envoie une notification à l'application EagleEyes sur votre appareil mobile lorsqu'un
événement survient. Il est possible de sélectionner l'événement du pour lequel vous souhaitez recevoir une notification sur votre appareil mobile.
Conditions préalables
Avant d'utiliser cette fonction, vérifier si :
• Vous avez un iPhone, iPad, ou smartphone Android™ ou tablette.
• Vous êtes souscrit aux services internet et vous pouvez y accéder depuis votre appareil mobile.
• L'application mobile, EagleEyes, est installée sur votre appareil mobile.
Pour plus d'informations, voir "Installer l'application EagleEyes" (ci-dessous).
Configurer le port WAN
1.
S'assurer que l'enregistreur est connecté correctement au commutateur de réseau par un câble de réseau
RJ45.
2.
Sur le NVR, sélectionner ADVANCED CONFIG > NETWORK > WAN.
Configurer la fonction Push status
Avant de configurer la fonction push status, s'assurer que :
• Le NVR est configuré comme décrit ci-dessus.
• Le NVR est connecté à l'internet.
Sur le NVR
1.
Sélectionner ADVANCED CONFIG > NOTIFY > PUSH STATUS.
2.
Régler ACTION sur ON.
3.
Sélectionner l'événement pour lequel vous souhaitez recevoir une notification sur votre appareil mobile.
V. 01 – 14/04/2014 30 ©Velleman nv
NVR4
Sur votre appareil mobile
• Activer Notifications dans EagleEyes sur votre appareil mobile.
• Pour plus d'informations, consulter le mode d'emploi sur www.velleman.be
ou visiter http://www.eagleeyescctv.com.
Tester
1.
Activer une alarme.
Par exemple, si VIDEO LOSS est réglé comme un événement, déconnecter la vidéo pour contrôler si vous recevez une notification push status.
11.2
Installer l'application EagleEyes
Conditions préalables
Avant d'installer EagleEyes sur votre appareil mobile pour la vidéosurveillance à distance, s'assurer de vérifier si
:
• Vous êtes souscrit aux services internet et vous pouvez y accéder depuis votre appareil mobile.
• Remarque : Il est possible que l'accès à l'internet depuis un réseau sans fil ou 3G vous soit facturé. Pour les taux d'accès à l'internet, consulter votre opérateur de réseau local ou votre fournisseur de service.
• Vous avez noté l'adresse IP, le numéro de port, le nom d'utilisateur et le mot de passe nécessaires pour accéder à votre caméra de réseau depuis l'internet.
Télécharger le logiciel
1.
Se connecter à la page web www.eagleeyescctv.prom depuis votre appareil mobile et s'enregistrer.
Ne pas télécharger EagleEyes depuis votre ordinateur. o
Pour Android, sélectionner le lien de téléchargement sur le site web pour lancer le téléchargement. o
Pour iPhone et iPad, il existe deux versions de EaglesEyes : EagleEyesHD Plus (payant) et EagleEyesHD
Lite (gratuit).
2.
Sélectionner la version souhaitée et ouvrir App Store pour télécharger l'application.
3.
Après le téléchargement, EagleEyes s'installera automatiquement à l'emplacement par défaut ou à l'emplacement sélectionné.
12.
Spécifications techniques
compression vidéo entrée vidéo sortie vidéo mode d'enregistrement fonctions multiplex audio E/S : zone de détection de mouvements sensibilité de détection de mouvements enregistrement pré-alarme
H.264 / MPEG4 / MJPEG
1 port LAN, jusqu'à 16 canaux depuis hub/commutateur sortie HDMI 1920 x 1080 pixels manuel / programmé / mouvement / alarme affichage en direct, enregistrement, lecture, sauvegarde et réseau entrée : uniquement par caméras IP sortie : 1 sortie audio grille de 22 x 18 par caméra
10 paramètres ajustables pour un calcul précis pour la détection de mouvements oui
V. 01 – 14/04/2014 31 ©Velleman nv
NVR4 système de sauvegarde capacité du disque dur interface web surveillance à distance - smartphones surveilance à distance - ordinateur sauvegarde USB 2.0 et sauvegarde par le réseau type SATA intégré : supporte 3 disques durs, supporte une capacité de disque dur jusqu'à 3 To (disque dur non incl.) eSATA externe : disque dur ou matrice externe pour disque dur
(supporte Linux) supporte le logiciel CMS gratuit (Windows & Mac OS) tous les navigateurs importants par Java, QuickTime et plug-in VLC
(Internet Explorer, Firefox, Safari, Google Chrome)
- application : iPad, iPod touch, iPhone, téléphone Android et tablette tactile
- disponible sur www.eagleeyescctv.com
- connexion à distance depuis toutes les plateformes du smartphone
(Apple, Android, BlackBerry, Nokia Symbian et Windows Mobile)
- CMS (Central Management System) : surveillance à distance jusqu'à
10 adresses IP différentes (Windows & Mac OS)
- navigateur web : Internet Explorer, Firefox, Google Chrome et Safari depuis Java, Quicktime ou plugin VLC message SMS, images par courriel et téléchargement vers pages FTP supporte TCP/IP, PPPoE, DHCP et DDNS
19 VCC / 3.42 A (incl.)
17.5 W (sans disque dur connecté) notification d'alarme à distance connexion réseau alimentation consommation température de travail rétablissement du système de 10 °C à 40 °C rétablissement automatique du système après la remise sous tension dimensions 432 x 90 x 326 mm
N'employer cet appareil qu'avec des accessoires d'origine. SA Velleman ne sera aucunement responsable de dommages ou lésions survenus à un usage (incorrect) de cet appareil.
Pour plus d'informations concernant cet article et la dernière version de ce mode d'emploi, consulter notre site www.velleman.eu.
Les spécifications et le contenu de ce mode d'emploi peuvent être modifiés sans avis préalable.
© DROITS D’AUTEUR
SA Velleman est l’ayant droit des droits d’auteur pour ce mode d'emploi. Tous droits mondiaux réservés.
Toute reproduction, traduction, copie ou diffusion, intégrale ou partielle, du contenu de cette notice par quelque procédé ou sur tout support électronique que ce soit est interdite sans l’accord préalable écrit de l’ayant droit.
V. 01 – 14/04/2014 32 ©Velleman nv
NVR4
GUÍA RÁPIDA
1.
Introducción
A los ciudadanos de la Unión Europea
Importantes informaciones sobre el medio ambiente concerniente a este producto
Este símbolo en este aparato o el embalaje indica que, si tira las muestras inservibles, podrían dañar el medio ambiente. No tire este aparato (ni las pilas, si las hubiera) en la basura doméstica; debe ir a una empresa especializada en reciclaje. Devuelva este aparato a su distribuidor o a la unidad de reciclaje local. Respete las leyes locales en relación con el medio ambiente.
Si tiene dudas, contacte con las autoridades locales para residuos.
¡Gracias por elegir Velleman! Lea atentamente las instrucciones del manual antes de usar el aparato. Si el aparato ha sufrido algún daño en el transporte no lo instale y póngase en contacto con su distribuidor.
2.
Instrucciones de seguridad
Mantenga el aparato lejos del alcance de personas no capacitadas y niños. riesgo de descargas eléctricas al abrir la caja. Puede sufrir una peligrosa descarga eléctrica al tocar un cable conectado a la red eléctrica.
Desconecte siempre el aparato de la red eléctrica si no va a usarlo durante un largo período de tiempo y antes de su limpieza o mantenimiento. Tire siempre del enchufe para desconectar el cable de red, nunca del propio cable.
3.
Normas generales
Véase la Garantía de servicio y calidad Velleman® al final de este manual del usuario.
Utilice el aparato sólo en interiores. No exponga este equipo a lluvia, humedad ni a ningún tipo de salpicadura o goteo. Nunca ponga un objeto con líquido en el aparato.
No exponga este equipo a polvo ni temperaturas extremas. Asegúrese de que los orificios de ventilación no estén bloqueados. Deje una distancia de mín. 1" (±2.5 cm) entre el aparato y cualquier otro objeto para asegurar una ventilación suficiente.
No agite el aparato. Evite usar excesiva fuerza durante el manejo y la instalación.
• Familiarícese con el funcionamiento del aparato antes de utilizarlo.
• Por razones de seguridad, las modificaciones no autorizadas del aparato están prohibidas. Los daños causados por modificaciones no autorizadas, no están cubiertos por la garantía.
• Utilice sólo el aparato para las aplicaciones descritas en este manual. Su uso incorrecto anula la garantía completamente.
• Los daños causados por descuido de las instrucciones de seguridad de este manual invalidarán su garantía y su distribuidor no será responsable de ningún daño u otros problemas resultantes.
• Guarde este manual del usuario para cuando necesite consultarlo.
• Instale y utilice la cámara al respetar la legislación et la vida privada de terceros.
4.
Características
• grabaciones en full HD
• capacidad 16 canales
• 1920 x 1080 píxeles (full HD): 480 IPS, 120 Mbps
• vigilancia a distancia por el software gratis 'EagleEyes' en iPhone, iPad y Android
• conexión con móvil por GPRS, 3G o WiFi
• pantalla con interfaz gráfica de usuario (GUI/Graphical User Interface) y ratón USB
• alta compatibilidad y copias de seguridad remotas: o
compatible con todas las cámaras IP, que cumplen con la norma ONVIF o
interfaz eSATA para conectar un disk array (con máx. 4 ranuras para RAID 0 y 1) o
funciona con el software Central Management System (CMS) gratis para copia de seguridad remota
V. 01 – 14/04/2014 33 ©Velleman nv
NVR4
• control local y control a distancia completamente independientes
• resolución de salida HDMI hasta 1080P
• Sistema Dinámico de Nombres de Dominio (DDNS): gratuito
• ratón USB: incl.
• mando a distancia IR: incl.
Hardware opcional
• disco duro: HD500GB/S, HD1TB/S, HD2TB/S
• monitor: MONSCA9
• cable HDMI: serie PAC400Tx y serie PAC400Gx
• cámaras IP compatibles: CAMIP16, CAMIP17, CAMIP18, CAMIP19
• router: EM4544, EM4543, EM4571, PCRT1
5.
Descripción
Panel Frontal alarm wan
SATA lan
HDD1 a HDD5 puerto USB puerto para el ratón
Panel trasero
LED: la alarma está activada
LED: el aparato está conectado a internet
LED: el NVR está conectado a la red LAN
LED: el disco duro SATA está activado
LED: hasta 5 discos duros están instalados y conectados correctamente
(3 discos duros con sistema de bloqueo rápido (quick-lock))
Conecte una unidad flash USB compatible para copias de seguridad.
Observación: Para la lista de unidades flash USB compatibles, consulte el amplio manual del usuario en el CD-ROM.
Para conectar un ratón (incl.).
1
2
3
4
5
6
7
1 2
AUDIO OUT puerto de salida de vídeo HDMI
EXTERNAL I/O eSATA
WAN
LAN
3
DC 19V IN
V. 01 – 14/04/2014
4 5 6 7
Para la conexión a la entrada de línea de audio de un amplificador.
Para la conexión a un monitor que soporta HDMI para salida de vídeo de altadefinición (puerto HDMI).
Observación: Utilice un adaptador de red adecuado (no incl.) para conectar un monitor que soporta VGA o Composite. puerto RS 485
Este puerto se utiliza para conectar un dispositivo de almacenamiento que soporte una interfaz eSATA. Por ejemplo: un disk array externo.
Para la conexión a internet con un cable de red 8P8C (RJ45).
Para la conexión a cámaras IP locales con un cable de red 8P8C (RJ45).
Para la conexión a un adaptador de red (incl.).
34 ©Velleman nv
6.
Instalar un disco duro (HDD)
NVR4
Preparación
• Desconecte el aparato de la red antes del mantenimiento y no toque el circuito electrónico para evitar descargas eléctricas.
• Utilice un disco duro adecuado (no incl.), tipo SATA. Si fuera necesario, formatee el disco duro.
• Es posible instalar máx. 3 discos duros con el sistema de bloqueo rápido (véase a continuación).
• Si quiere utilizar un disco duro verde y para asegurar un funcionamiento correcto del aparato, utilice sólo uno que ha sido diseñado para la vigilancia.
1.
Desatornille los tornillos y saque la tapa superior.
2.
Localice la conexión del disco duro y el soporte de montaje en el aparato. Los tornillos están fijados al soporte.
3.
Con el circuito impreso hacia abajo, alinee el disco duro con su alimentación y el puerto SATA e introduzca el disco duro.
4.
Fije el disco duro al soporte con los tornillos incorporados.
7.
Esquema de conexión
• Es posible conectar hasta 16 cámaras IP.
• Para asegurarse de que la configuración automática funcione correctamente, conecte primero las cámaras
IP y actívelas Luego, active el NVR.
• Se necesita un mínimo de conocimientos de instalación de red para trabajar con este aparato.
• Para poder acceder a distancia al NVR con su teléfono móvil o su laptop, conéctelo a internet. Para más información, consulte www.surveillance-download.com/user/network_setup/network_setup_recorder.pdf.
Conectar la cámara IP (plug-and-play/enchufar y listo)
Consulte la figura de la página 2 para el esquema de conexión.
1.
Conecte la cámara a un hub/switch.
V. 01 – 14/04/2014 35 ©Velleman nv
NVR4
2.
Espere hasta que se haya terminado la configuración automática de la cámara y que se visualicen las imágenes en la pantalla.
Observaciones
El NVR configurará automáticamente la dirección IP de una cámara conectada por LAN si:
• La cámara IP conectada es una cámara IP de nuestra marca.
• El método de configuración IP de la cámara está en DHCP (ajuste por defecto).
• Primero, activa la cámara y luego el NVR.
8.
Información y menús en pantalla
Bloquear / desbloquear el aparato
En el menú de estado, haga clic en (bloquear) o (desbloquear) para bloquear o desbloquear el NVR.
Introduzca el nombre de usuario y la contraseña para desbloquear el NVR.
Observación: El nombre de usuario y la contraseña por defecto son "admin". Diferentes tipos de usuarios tienen diferentes derechos de acceso a las funciones. Para obtener más información, consulte el amplio manual del usuario en el CD-ROM.
8.2
Iconos de estado para el NVR y la red
Los iconos de estado para el NVR y la red se visualizan en la esquina superior derecha de la pantalla (al lado del espacio disponible en disco duro).
Los iconos visualizados pueden variar. Esto depende de la situación o la configuración.
Iconos posibles:
Iconos de estado para el NVR teclado bloqueado los canales están bloqueados unidad flash USB / un aparato USB está conectado la grabación con temporizador está activada la función « sobre-escribir » está activada el modo de secuencia está activado el modo PTZ está activado carga CPU el NVR está desbloqueado los canales están desbloqueados
no está conectado un aparato USB la grabación con temporizador está desactivada la función « sobre-escribir » está desactivada el modo de secuencia está desactivado el modo PTZ está desactivado
Iconos de estado para la red
(WAN) conexión a internet
(WAN) conexión local
(LAN) modo automático– Mbit/s
(LAN) DHCP / modo IP estático
(WAN) internet desconectado
(LAN) modo automático– Gbit/s
(LAN) la cámara está desconectada
Estado de los canales
Los iconos para el estado de los canales se visualizan en cada canal de la pantalla. Iconos posibles: la función « búsqueda automática » está activada la función « búsqueda automática » está desactivada
V. 01 – 14/04/2014 36 ©Velleman nv
NVR4 la función « audio en directo » está activada la función « reproducción de audio » está activada tamaño original grabación alarma informaciones en directo la función « audio en directo » está desactivada la función « reproducción de audio » está desactivada ajustar a la pantalla detección de personas detección de movimientos reproducción de las informaciones
Menú rápido
Para acceder a este menú, ponga el ratón en la flecha de la parte izquierda de la pantalla. Incluye los siguientes iconos:
Haga clic para visualizar la ventana de selección de canales y seleccione el canal deseado.
Haga clic para visualizar el panel de control de la reproducción. En el panel de control:
Haga clic en para reproducir el último vídeo grabado
Haga clic en para abrir la lista de búsqueda.
Haga clic para abrir la ventana de búsqueda IP y para controlar el estado de conexión de cada canal.
Haga clic para visualizar el icono de desactivación y para desactivar o reiniciar el aparato.
Menú principal
Para acceder al menú principal, haga clic en cualquier parte de la pantalla. Vuelva a hacer clic para ocultar el menú.
Icono Etiqueta Incluye ajustes para
Quick start Channel Title, Event Status, Date Display, Mouse Sensitivity, Record Config.
System Account, Tools, System Info, Backup Schedule, Online, Regular Report
Event information
(Información sobre eventos)
Quick Search, Event Search, HDD Info, Event Log
Advanced config
Connection, Camera, Detection, Alert, Network, Display, Record, Notify,
Multicasting
Schedule setting
Event Timer, Record Timer
Menú de reproducción
Para acceder al panel de reproducción, abra el menú rápido (véase arriba) y haga clic en . avanzar
Haga clic para avanzar a una velocidad entre 4 y 32 veces más rápida de lo normal. retroceder reproducir / hacer una pausa
Haga clic para retroceder a una velocidad entre 4 y 32 veces más rápida de lo normal.
Haga clic para reproducir el último vídeo grabado. Vuelva a hacer clic para hacer una pausa.
En el modo pausa, haga una vez clic en para avanzar un fotograma.
Haga clic en para retroceder un fotograma.
V. 01 – 14/04/2014 37 ©Velleman nv
NVR4 parar reproducción lenta hora siguiente/anterior búsqueda rápida
Haga clic para desactivar la reproducción.
Haga clic una vez para una reproducción a 1/4 de la velocidad normal.
Haga clic dos veces para una reproducción a 1/8 de la velocidad normal.
Haga clic para ir al intervalo de una hora siguiente/anterior (p.ej. de
1:00 a 12:00 o de 14:00 a 15:00) y inicie la reproducción del primer vídeo grabado durante este intervalo.
Haga clic para entrar en el menú de búsqueda rápida.
9.
Ajustar la cámara en un puerto LAN (Plug and Play)
Observación: Este método de configuración vale para cámaras ETS.
Configuración automática
El NVR configurará automáticamente la dirección IP de una cámara ETS conectada por LAN si:
• El método de configuración IP por defecto de la cámara es DHCP.
• Active la cámara antes de que active el NVR.
Si no fuera el caso, puede configurar la dirección IP de la cámara manualmente (véase a continuación).
Configuración manual
Si el NVR no configura la dirección IP de la cámara automáticamente (véase arriba), es posible que el método de configuración IP por defecto de la cámara IP no esté en DHCP. Para solucionar esto, ajuste la dirección IP de la cámara en 10.1.1.xx (xx entre 11 y 253), en el mismo segmento de red que el NVR.
1.
En la barra con el menú rápido , haga clic en .Se visualiza una lista de todas las cámaras IP conectadas con el estado de conexión y la dirección MAC.
2.
Seleccione una dirección IP no utilizada (UNUSED) y haga clic en SETUP.
3.
Seleccione STATIC en NETWORK TYPE y modifique la dirección IP en 10.1.1.xx (xx en el rango de 11 a
253).
4.
Haga clic en APPLY y EXIT para guardar las modificaciones.
5.
Espere hasta que el NVR detecte la cámara IP y visualice imágenes.
V. 01 – 14/04/2014 38 ©Velleman nv
NVR4
Configurar una cámara con conexión desde internet
Es posible grabar imágenes por la red desde una cámara IP.
1.
Asegúrese de que la cámara IP camera sea accesible fuera de la red LAN por DDNS (p.ej. ip_office.ddns.eagleeyes.tw).
2.
En el menú principal , haga clic en (ADVANCED CONFIG) y seleccione CONNECTION.
3.
Para asignar un canal a una cámara IP remota, haga clic en URI para introducir la dirección de la cámara y el número de puerto.
4.
Haga clic en SETUP para introducir la información de acceso de la cámara.
5.
Introduzca el nombre de usuario (USER NAME) y la contraseña (PASSWORD) para acceder a la cámara IP.
6.
haga clic en GET TYPE
7.
Seleccione el tamaño de la imagen (IMAGE SIZE), la calidad de la imagen (QUALITY), y el número de imágenes por segundo (I.P.S.).
Observación: Las opciones disponibles dependen del tipo de cámara que quiere conectar.
8.
Haga clic en GET TYPE para detectar la cámara y asegúrese de que la información de acceso sea correcta.
9.
Opcional: para una cámara con grabación de audio, ponga AUDIO en ON u OFF.
10.
Menú rápido
Desactivar y reiniciar
Para desactivar o reinicializar el NVR:
• En el menú rápido, haga clic en y haga clic en (desactivar) o (inicializar).
Visualizar un canal en el modo de pantalla completa (Full-Screen)
Para visualizar un canal en el modo de pantalla completa, proceda de la forma siguiente:
• Haga clic directamente en la imagen del canal.
Haga clic dos veces en la imagen para volver a la visualización anterior.
- o -
1.
En el menú rápido, haga clic en .
2.
En el panel de control que aparece, seleccione el canal que quiere visualizar en modo de pantalla completa.
V. 01 – 14/04/2014 39 ©Velleman nv
NVR4
3.
Haga clic en el botón 4 – 6 - 9 - 12 ó 16 para seleccionar otro modo de visualización.
Reproducir las imágenes grabadas
1.
Asegúrese de que esté activada la grabación manual y/o la grabación de eventos: En el menú principal, haga clic en (ADVANCED CONFIG) y seleccione RECORD para controlar o configurar los ajustes.
2.
En el menú de reproducción, pulse el botón de reproducción . Los ficheros grabados se visualizan.
3.
Con el botón para avanzar y retroceder puede aumentar/disminuir la velocidad de reproducción.
Pulse el botón repetidas veces para aumentar/disminuir la velocidad 4x, 8x, 16x o 32x (máx.).
4.
Pulse el botón para hacer una pausa.
5.
Pulse el botón para desactivar la reproducción y volver al monitoreo en vivo.
11.
Push Status
La función « Push Status » envía notificaciones sobre eventos a la aplicación EagleEyes del teléfono móvil.
Seleccione los eventos para los que quiere recibir una notificación.
Prerrequisitos
Antes de utilizar esta función, asegúrese de que haya comprobado lo siguiente:
• Tiene un iPhone, un iPad o un teléfono móvil o tablet Android™.
• Tiene suscritos y disponibles para utilizar servicios de Internet en su teléfono móvil.
• La app EagleEyes está instalada en su teléfono móvil.
Para más información, consulte « Instalar la aplicación EagleEyes ».
Configurar el puerto WAN
1.
Asegúrese de que el NVR esté correctamente conectado a un switch con un cable de red RJ45.
2.
En el NVR, seleccione ADVANCED CONFIG > NETWORK > WAN.
Configurar la función « Push Status »
Antes de configurar la función « Push Status », asegúrese de que:
• El NVR esté configurado como se indica arriba.
• El NVR esté conectado a internet.
En el NVR
1.
Seleccione ADVANCED CONFIG > NOTIFY > PUSH STATUS.
2.
Ponga "ACTION" en la posición ON.
3.
Seleccione el evento del sistema para el que quiere recibir una notificación en el teléfono móvil.
V. 01 – 14/04/2014 40 ©Velleman nv
NVR4
En el teléfono móvil
• Active la opción « Notifications » (notificaciones) en EagleEyes.
• Para más información sobre EagleEyes, consulte la guía de instalación EagleEyes en www.velleman.eu
o visite www.eagleeyescctv.com.
Realizar una prueba
1.
Active la alarma.
Por ejemplo: Ponga VIDEO LOSS como un evento y desconecte el vídeo para ver si recibe una notificación «
Push Status ».
11.2
Instalar la aplicación « EagleEyes »
Prerrequisitos
Antes de instalar EagleEyes en el teléfono móvil para la vigilancia a distancia, asegúrese de que haya comprobado lo siguiente:
• Tiene suscritos y disponibles para utilizar servicios de Internet en su teléfono móvil.
• Observación: Es posible que le cobren por acceder a Internet a través de las redes inalámbricas o las redes
3G. Para más detalles sobre las tasas de acceso a internet, consulte a su operador de red local o a su proveedor de servicios.
• Ha anotado la dirección IP, el número de puerto, el nombre de usuario y la contraseña utilizados para acceder a su cámara de red desde el internet.
Dónde descargar el software
1.
Conéctese a la página web www.eagleeyescctv.com desde su teléfono y regístrese.
No intente descargar EagleEyes desde su ordenador. o
Para Android, seleccione el enlace de descarga que puede encontrar en la página web para iniciar la descarga. o
Para iPhone y iPad, están disponibles dos versiones de la app EagleEyes: EagleEyesHD Plus (versión de pago) und EagleEyesHD Lite (versión gratuita).
2.
Seleccione la versión que quiera y se abre la “App Store” para descargar la aplicación.
3.
Cuando la descarga se haya completado, EagleEyes se instalará automáticamente en la ubicación por defecto en la que se guardan todas las aplicaciones en su teléfono móvil, o bien donde usted especifique.
12.
Especificaciones
formato de compresión vídeo entrada de vídeo salida de vídeo modo de grabación funciones multiplex audio E/S: zona de detección de movimiento
H.264 / MPEG4 / MJPEG
1 puerto LAN, hasta 16 canales por hub/switch salida HDMI 1920 x 1080 píxeles manual / temporizador / movimiento / alarma reproducción en directa, grabación, reproducción, copia de seguridad y red entrada: sólo por cámaras IP salida: 1 salida de audio rejilla de 22 x 18 por cámara
V. 01 – 14/04/2014 41 ©Velleman nv
NVR4 sensibilidad de detección de movimientos grabación prealarma aparato 'backup' capacidad disco duro
10 variables ajustables para un cálculo preciso de la detección de movimiento sí copia de seguridad USB 2.0 y copia de seguridad por la red tipo SATA incluido: soporta 3 discos duros, soporta una capacidad de disco duro de hasta 3 TB (disco duro no incl.) interfaz web eSATA externo: disco duro externo o disk array (soporta el sistema
Linux) soporta el software CMS gratis (Windows & Mac OS) vigilancia a distancia por el teléfono móvil - smartphones vigilancia a distancia por el teléfono móvil - ordenador todos los navegadores importantes por Java, QuickTime y plug-in VLC
(Internet Explorer, Firefox, Safari, Google Chrome)
- app: iPad, iPod touch, iPhone, dispositivos Android
- disponible en www.eagleeyescctv.com
- conexión a distancia por cualquier plataforma de smartphone (Apple,
Android, BlackBerry, Nokia Symbian y Windows Mobile)
- CMS (Central Management System): manejo central de hasta 10 direcciones IP (Windows & Mac OS)
- navegador: Internet Explorer, Firefox, Google Chrome y Safari mediante Java, Quicktime o plug-in VLC mensaje SMS, imágenes por correo electrónico y cargar a página FTP notificación de alarma a distancia conexión de red alimentación consumo temperatura de funcionamiento restablecimiento soporta TCP/IP, PPPoE, DHCP y DDNS
19 VDC / 3.42 A (incl.)
17.5 W (si no está conectado un disco duro) de 10 °C a 40 °C restablecimiento automático del sistema después de haber activado la alimentación de nuevo dimensiones 432 x 90 x 326 mm
Utilice este aparato sólo con los accesorios originales. Velleman NV no será responsable de daños ni lesiones causados por un uso (indebido) de este aparato.
Para más información sobre este producto y la versión más reciente de este manual del usuario, visite nuestra página www.velleman.eu.
Se pueden modificar las especificaciones y el contenido de este manual sin previo aviso.
© DERECHOS DE AUTOR
Velleman NV dispone de los derechos de autor para este manual del usuario. Todos los derechos mundiales reservados.
Está estrictamente prohibido reproducir, traducir, copiar, editar y guardar este manual del usuario o partes de ello sin previo permiso escrito del derecho habiente.
V. 01 – 14/04/2014 42 ©Velleman nv
NVR4
SCHNELLEINSTIEG
1.
Einführung
An alle Einwohner der Europäischen Union
Wichtige Umweltinformationen über dieses Produkt
Dieses Symbol auf dem Produkt oder der Verpackung zeigt an, dass die Entsorgung dieses Produktes nach seinem Lebenszyklus der Umwelt Schaden zufügen kann. Entsorgen Sie die Einheit (oder verwendeten Batterien) nicht als unsortiertes Hausmüll; die Einheit oder verwendeten Batterien müssen von einer spezialisierten Firma zwecks Recycling entsorgt werden. Diese Einheit muss an den
Händler oder ein örtliches Recycling-Unternehmen retourniert werden. Respektieren Sie die örtlichen
Umweltvorschriften.
Falls Zweifel bestehen, wenden Sie sich für Entsorgungsrichtlinien an Ihre örtliche Behörde.
Vielen Dank, dass Sie sich für Velleman entschieden haben! Lesen Sie diese Bedienungsanleitung vor
Inbetriebnahme sorgfältig durch. Überprüfen Sie, ob Transportschäden vorliegen. Sollte dies der Fall sein, verwenden Sie das Gerät nicht und wenden Sie sich an Ihren Händler.
2.
Sicherheitshinweise
Halten Sie Kinder und Unbefugte vom Gerät fern.
Stromschlaggefahr beim Öffnen des Gehäuses. Das Berühren von unter Spannung stehenden
Leitungen könnte zu lebensgefährlichen elektrischen Schlägen führen.
Trennen Sie das Gerät bei Nichtbenutzung und vor jeder Reinigung vom Netz. Fassen Sie dazu den
Netzstecker an der Grifffläche an und ziehen Sie nie an der Netzleitung.
3.
Allgemeine Richtlinien
Siehe Velleman® Service- und Qualitätsgarantie am Ende dieser Bedienungsanleitung.
Verwenden Sie das Gerät nur im Innenbereich. Schützen Sie das Gerät vor Regen und
Feuchte. Setzen Sie das Gerät keiner Flüssigkeit wie z.B. Tropf- oder Spritzwasser, aus.
Stellen Sie keine mit Flüssigkeit befüllten Gegenstände auf das Gerät.
Schützen Sie das Gerät vor Staub und extremen Temperaturen. Beachten Sie, dass die
Lüftungsschlitze nicht blockiert werden. Beachten Sie eine minimale Entfernung von 1" (±2.5 cm) zwischen dem Gerät und jedem anderen Gegenstand.
Vermeiden Sie Erschütterungen. Wenden Sie bei der Bedienung keine Gewalt an.
• Nehmen Sie das Gerät erst in Betrieb, nachdem Sie sich mit seinen Funktionen vertraut gemacht haben.
• Eigenmächtige Veränderungen sind aus Sicherheitsgründen verboten. Bei Schäden verursacht durch eigenmächtige Änderungen erlischt der Garantieanspruch.
• Verwenden Sie das Gerät nur für Anwendungen beschrieben in dieser Bedienungsanleitung sonst kann dies zu Schäden am Produkt führen und erlischt der Garantieanspruch.
• Bei Schäden, die durch Nichtbeachtung der Bedienungsanleitung verursacht werden, erlischt der
Garantieanspruch. Für daraus resultierende Folgeschäden übernimmt der Hersteller keine Haftung.
• Bewahren Sie diese Bedienungsanleitung für künftige Einsichtnahme auf.
• Installieren und verwenden Sie das Gerät nicht für illegale Praktiken und beachten Sie die
Intimsphäre aller.
4.
Eigenschaften
• Full HD-Aufzeichnung
• Leistung: 16 Kanäle
• 1920 x 1080 Pixel (full HD): 480 IPS, 120 Mbps
• Fernüberwachung über die gratis EagleEyes-Software auf iPhone, iPad und Android
• Anschluss mit Handy über GPRS, 3G oder Wi-Fi
• Display mit graphischer Benutzerschnittstelle (GUI/Graphical User Interface) und USB-Maus
V. 01 – 14/04/2014 43 ©Velleman nv
NVR4
• hohe Kompatibilität und Offsite-Backup: o
mit allen wichtigsten IP-Kameras, die ONVIF-Norm entsprechen, kompatibel o
eSATA-Schnittstelle, um ein Disk-Array (mit max. 4 Slots für Raid 0 oder Raid 1) anzuschließen o
funktioniert mit der gratis CMS-Software (Central Management System) für Offsite-Backup
• separate lokale Bedienung und Fernbedienung
• HDMI-Ausgangsauflösung bis 1080P
• Dynamischer Domain-Name-System-Eintrag (DDNS): gratis
• USB-Maus: mitgeliefert
• IR-Fernbedienung: mitgeliefert
Optionale Hardware
• Festplatte: HD500GB/S, HD1TB/S, HD2TB/S
• Monitor: MONSCA9
• HDMI-Kabel: PAC400Tx-Serie und PAC400Gx-Serie
• kompatible IP-Kameras: CAMIP16, CAMIP17, CAMIP18, CAMIP19
• Router: EM4544, EM4543, EM4571, PCRT1
5.
Beschreibung
Vorderseite alarm wan
SATA lan
HDD1 bis HDD5
USB-Port
Maus-Port
Rückseite
LED-Anzeige: der Alarm wird ausgelöst
LED-Anzeige: der NVR ist mit Internet verbunden
LED-Anzeige: der NVR ist mit dem LAN-Netzwerk verbunden
LED-Anzeige: SATA-Festplatte ist aktiv
LED-Anzeige: es sind bis zu 5 Festplatten installiert und korrekt angeschlossen worden
(3 Festplatten mit Quick-Lock-System)
Schließen Sie ein kompatibles USB Flash-Laufwerk für Video-Backup an.
Bemerkung: Die Liste mit den kompatiblen USB Flash-Laufwerken, finden Sie in der ausführlichen Bedienungsanleitung auf der CD-ROM.
Zum Anschließen einer Maus (mitgeliefert).
1
2
1 2 3
AUDIO OUT
HDMI Video-
Ausgangsport
3 EXTERNAL I/O
4 5 6 7
Zum Anschließen des NVR an einen Audio Line-Eingang eines Verstärkers.
Zum Verbinden mit einem Monitor, der HDMI für hochauflösenden- Videoausgang unterstützt. (HDMI-Port).
Bemerkung: Verwenden Sie ein geeignetes Netzteil (nicht mitgeliefert), um einen
Monitor, der VGA oder Composite unterstützt, anzuschließen.
RS 485-Port
V. 01 – 14/04/2014 44 ©Velleman nv
NVR4
4
5
6
7 eSATA
WAN
LAN
DC 19V IN
Dieser Port wird verwendet, um ein Speichergerät, das eine eSATA-Schnittstelle unterstützt, anzuschließen. Zum Beispiel: ein externes Disk-Array.
Zum Anschließen des NVR über ein 8P8C-Netzwerkkabel (RJ45) an Internet
Zum Anschließen des NVR über ein 8P8C-Netzwerkkabel (RJ45) an lokale IP-
Kameras.
Zum Anschließen des NVR über das Netzteil (mitgeliefert) am Stromnetz.
6.
Eine Festplatte installieren (HDD)
Vorbereitung
• Trennen Sie das Gerät zuerst vor Wartung vom Netz. Berühren Sie keinen elektronischen Kreis, um
Stromschläge zu vermeiden.
• Benutzen Sie eine geeignete Festplatte (nicht mitgeliefert), Typ SATA. Wenn nötig, formatieren Sie dann die
Festplatte.
• Sie können max. 3 Festplatten mit dem Quick-Lock-System installieren (siehe unten).
• Möchten Sie eine grüne Festplatte verwenden, benutzen Sie dann nur eine Festplatte, die speziell für
Überwachung entworfen ist, um ein gutes Funktionieren sicherzustellen.
1.
Lockern Sie die Schrauben der Oberseite und entfernen Sie den Deckel.
2.
Lokalisieren Sie den Festplattenanschluss und die Halterung im Gerät. Die Schrauben sind an der Halterung befestigt.
3.
Mit der Leiterplatte nach unten, richten Sie die Festplatte mit der Stromversorgung und dem SATA-Port aus und legen Sie die
Festplatte ein.
4.
Befestigen Sie die Festplatte mit den integrierten Schrauben an der Halterung.
7.
Anschlussdiagramm
• Es können bis zu 16 IP-Kameras angeschlossen werden.
• Um sicherzustellen, dass eine automatische Konfiguration korrekt funktioniert, verbinden und schalten Sie die IP-Kameras zuerst ein. Schalten Sie erst danach den NVR ein.
V. 01 – 14/04/2014 45 ©Velleman nv
NVR4
• Sie brauchen minimale Netzwerk-Installationskenntnisse, um dieses Gerät zu betreiben.
• Um mit Ihrem Mobiltelefon oder Laptop auf den NVR zuzugreifen, verbinden Sie diesen mit dem Internet.
Für mehr Informationen, besuchen Sie www.surveillance-download.com/user/network_setup/network_setup_recorder.pdf.
Die IP-Kamera anschließen (Plug-and-Play/sofort betriebsbereit)
Siehe Abbildung auf Seite 2 für das Anschlussdiagramm.
1.
Verbinden Sie die Kamera mit einem Hub/Switch
2.
Warten Sie bis die Kamera automatisch konfiguriert worden ist und die Bilder im Display erscheinen.
Bemerkungen
Der NVR konfiguriert die IP-Adresse einer über LAN angeschlossenen Kamera automatisch, wenn:
• Die angeschlossene IP-Kamera eine IP-Kamera unserer Marke ist.
• Die Standard IP-Konfigurationsmethode der Kamera auf DHCP steht (Werkseinstellung).
• Die Kamera vor dem NVR eingeschaltet wird.
8.
Information und Menüs auf dem Bildschirm
Verriegelung / Entriegelung
Klicken Sie auf (verriegeln) oder im Statusmenü, um den NVR zu verriegeln bzw. zu entriegeln. Geben
Sie den Benutzernamen und das Passwort nach Entriegelung ein.
Bemerkung: Der Standard-Benutzername und das Standard-Kennwort lauten "admin". Verschiedene Benutzer haben eine unterschiedliche Zugangsberechtigung. Mehr Informationen finden Sie in der ausführlichen
Bedienungsanleitung auf der CD-ROM.
8.2
Statussymbole für den NVR und das Netzwerk
Die Statussymbole für den NVR und das Netzwerk befinden sich oben rechts (neben dem verfügbaren
Speicherplatz).
Die angezeigten Symbole können variieren. Dies hängt von der Situation oder der Konfiguration ab.
Mögliche Symbole:
Statussymbole für den NVR
Tastensperre
Kanal verriegelt
USB Flash-Laufwerk / Gerät verbunden
Timer-Aufnahme eingeschaltet die Funktion « überschreiben » ist eingeschaltet
Sequenzmodus eingeschaltet
PTZ-Modus eingeschaltet
CPU-Last
Statussymbole für das Netzwerk
(WAN) mit Internet verbunden
(WAN) lokale Verbindung
(LAN) Auto-Modus– Mbit/s
Entriegelung
Kanal entriegelt
kein USB-Gerät angeschlossen
Timer-Aufnahme ausgeschaltet die Funktion « überschreiben » ist ausgeschaltet
Sequenzmodus ausgeschaltet
PTZ-Modus ausgeschaltet
(WAN) nicht mit Internet verbunden
(LAN) Auto-Modus– Gbit/s
V. 01 – 14/04/2014 46 ©Velleman nv
NVR4
(LAN) DHCP / Statischer IP-Modus (LAN) Kamera nicht angeschlossen
Kanalstatus
Die Symbole für den Kanalstatus werden auf jedem Kanal im Bildschirm angezeigt. Mögliche Symbole:
« Automatische Suche » eingeschaltet « Automatische Suche » ausgeschaltet
« Live Audio » eingeschaltet
Audiowiedergabe eingeschaltet
Originalgröße
Aufzeichnung
Alarm
Live-Informationen
Audio ausgeschaltet
Audiowiedergabe ausgeschaltet
An den Bildschirm anpassen
Personenerkennung
Bewegungserfassung
Wiedergabe-Informationen
Schnellmenü
Um auf das Schnellmenü zuzugreifen, zeigen Sie mit der Maus auf den Pfeil (links auf dem Bildschirm). Sie enthält folgende Symbole:
Klicken Sie, um das Kanalwechselfenster anzuzeigen und den gewünschten Kanal auszuwählen.
Klicken Sie, um das Bedienfeld für die Wiedergabe anzuzeigen. Auf das Bedienfeld:
Klicken Sie , um die letzte Video-Aufzeichnung abzuspielen
Klicken Sie , um die Suchliste zu öffnen.
Klicken Sie, um das IP-Suchfenster zu öffnen und den Verbindungsstatus jedes Kanals zu
überprüfen.
Klicken Sie, um das Ausschaltmenü anzuzeigen und das Gerät auszuschalten oder neu zu starten.
Hauptmenü
Um auf das Hauptmenü zuzugreifen, klicken Sie mit der rechten Maustaste an einer beliebigen Stelle auf dem
Bildschirm. Klicken Sie wieder mit der rechten Maustaste, um das Menü auszublenden.
Symbol Etikett Enthält Einstellungen für
Quick start Channel Title, Event Status, Date Display, Mouse Sensitivity, Record Config.
System
Event information
Advanced config
Timer
Wiedergabe-Menü
Account, Tools, System Info, Backup Schedule, Online, Regular Report
Quick Search, Event Search, HDD Info, Event Log
Connection, Camera, Detection, Alert, Network, Display, Record, Notify,
Multicasting
Event Timer, Record Timer
Um auf das Wiedergabe-Menü zuzugreifen, öffnen Sie das Schnellmenü (siehe oben) und klicken Sie auf .
Schneller Vorlauf Klicken Sie, um mit einer 4 bis 32facher Geschwindigkeit vorzuspulen.
V. 01 – 14/04/2014 47 ©Velleman nv
NVR4
Schneller Rücklauf wiedergeben / pausieren
Stopp
Langsame
Wiedergabe
Vorige/nächste
Stunde
Klicken Sie, um mit einer 4 bis 32facher Geschwindigkeit zurückzuspulen.
Klicken Sie, um die letzte Video-Aufzeichnung abzuspielen. Klicken Sie wieder, um zu unterbrechen.
Im Pause-Modus, klicken Sie ein Mal auf um ein Bild vorwärts zu gehen oder klicken Sie auf um ein Bild rückwärts zu gehen.
Klicken Sie, um die Wiedergabe anzuhalten.
Klicken Sie ein Mal, um die Abspielgeschwindigkeit um 1/4 zu reduzieren. Klicken Sie zwei Mal, um die Abspielgeschwindigkeit auf 1/4 zu verringern.
Klicken Sie, um zum nächsten/vorigen Stundenintervall zu springen
(z.B. 11:00 bis 12:00 oder 14:00 bis 15:00) und starten Sie die
Wiedergabe des ersten innerhalb dieser Stunde aufgenommenen
Videoclips.
Klicken Sie, um das Menü aufzurufen. Schnellsuche
9.
Konfiguration durch LAN (Plug and Play)
Bemerkung: diese Konfigurationsmethode eignet sich für ETS-Kameras.
Automatische Konfiguration
Der NVR konfiguriert die IP-Adresse einer über LAN angeschlossenen ETS-Kamera automatisch, wenn:
• Die Standard IP-Konfigurationsmethode der Kamera DHCP DHCP ist.
• Die Kamera vor dem NVR eingeschaltet wird.
Ist dies nicht der Fall, so konfigurieren Sie die IP-Adresse Ihrer Kamera manuell (siehe unten).
Manuelle Konfiguration
Konfiguriert der NVR die IP-Adresse Ihrer Kamera nicht automatisch (siehe oben), dann ist die IP-
Konfigurationsmethode der IP-Kamera nicht auf DHCP eingestellt. Um das Problem zu lösen, konfigurieren Sie die IP-Adresse zu 10.1.1.xx (xx zwischen 11 und 253), im gleichen Netzwerksegment wie der NVR.
1.
Im Schnellmenü , klicken Sie auf. Eine Liste aller angeschlossenen IP-Kameras mit Verbindungsstatus und MAC-Adresse wird angezeigt.
2.
Wählen Sie eine IP-Adresse die nicht benutzt wird (UNUSED)und klicken Sie auf SETUP.
V. 01 – 14/04/2014 48 ©Velleman nv
NVR4
3.
Wählen Sie STATIC in NETWORK TYPE und ändern Sie die IP-Adresse zu 10.1.1.xx (xx zwischen 11 und
253).
4.
Klicken Sie auf APPLY und EXIT um die Änderungen zu speichern.
5.
Warten Sie bis der NVR die IP-Kamera erkennt und die Bilder Anzeigt s.
Eine Kamera mit Internetverbindung einstellen
Über Internet können Bilder einer IP-Kamera aufgenommen werden.
1.
Beachten Sie, dass die IP-Kamera außerhalb des LAN-Netzwerks über DDNS zugänglich ist (z.B. ip_office.ddns.eagleeyes.tw). .
2.
Im Hauptmenü, klicken Sie auf (ADVANCED CONFIG) und wählen Sie CONNECTION aus.
3.
Um einen Kanal einer IP-Kamera zuzuweisen, klicken Sie auf URI, um die Adresse der Kamera und die
Portnummer einzugeben.
4.
Klicken Sie auf SETUP, um die Zugangsinformation der Kamera aufzurufen.
5.
Geben Sie den Benutzernamen(USER NAME) und das Passwort (PASSWORD) ein, um auf die IP-Kamera zuzugreifen.
6.
Klicken Sie auf GET TYPE , um die Kamera zu erfassen und beachten Sie, dass die Zugangsinformation korrekt ist.
7.
Wählen Sie die Bildgröße (IMAGE SIZE), die Bildqualität (QUALITY), und die Anzahl Bilder pro Sekunde
(I.P.S.) aus.).
Bemerkung: Die verfügbaren Optionen hängen von der Kamera, die Sie anschließen möchten, ab.
8.
Klicken Sie auf GET TYPE um die Kamera zu erfassen und beachten Sie, dass die Zugangsinformation korrekt ist.
9.
Optional: für eine Kamera mit Audio-Aufnahme, stellen Sie AUDIO auf ON oder OFF.
10.
Schnellmenü
Ausschalten und neu starten
Um den NVR auszuschalten oder neu zu starten:
• Im Schnellmenü, klicken Sie auf und dann auf (ausschalten) oder auf (neu starten).
V. 01 – 14/04/2014 49 ©Velleman nv
NVR4
Einen Kanal im Vollbildmodus anzeigen (Full-Screen)
Um einen Kanal im Vollbildmodus anzuzeigen, gehen Sie wie folgt vor:
• Klicken Sie direkt auf das Kanalbild, um es in Vollbild anzuzeigen.
Klicken Sie zwei Mal auf das Bild, um zur vorigen Anzeige zurückzukehren.
- oder -
1.
Im Schnellmenü, klicken Sie auf .
2.
Im Bedienfeld, das erscheint, wählen Sie den Kanal, den Sie im Vollbildmodus anzeigen möchten.
3.
Klicken Sie auf die Taste 4 – 6 - 9 - 12 oder 16, um einen anderen Modus austzuwählen.
Aufgezeichnete Videoclips wiedergeben
1.
Beachten Sie, dass die manuelle und/oder Wiedergabe eines Ereignisses aktiviert ist: Im Hauptmenü
[19], klicken Sie auf (ADVANCED CONFIG) und wählen Sie RECORD aus, um die Einstellungen zu
überprüfen oder regeln.
2.
Im Wiedergabe-Menü, drücken Sie auf PLAY . Die aufgezeichneten Dateien werden angezeigt.
3.
Drücken Sie auf und um die Wiedergabegeschwindigkeit zu erhöhen/verringern. Drücken Sie die
Taste wiederholt um die Geschwindigkeit 4x, 8x, 16x, oder 32x (max.) zu erhöhen/verringern.
4.
Drücken Sie auf , um die Wiedergabe zu pausieren.
5.
Drücken Sie auf um die Wiedergabe zu stoppen und zur Live-Überwachung zurückzukehren.
11.
Push Status
Die Push Status-Funktion sendet Meldungen über Ereignisse zur EagleEyes-App auf dem Mobilgerät. Wählen Sie für welche Ereignisse Sie eine Meldung empfangen möchten.
Vorbedingungen
Vor Gerbrauch dieser Funktion, überprüfen Sie folgendes:
• Sie haben ein iPhone, iPad, oder Android™-Smartphone oder Tablet-PC
• Mobile Internetdienste sind abonniert und zur Nutzung auf Ihrem Handy verfügbar.
• Die EagleEyes-App ist auf Ihrem Mobiltelefon installiert.
Für mehr Informationen, lesen Sie "Die EagleEyes-App installieren".
Den WAN-Port einstellen
1.
Stellen Sie sicher, dass der NVR korrekt über das RK45-Netzwerkkabel mit einem Switch verbunden ist.
2.
Auf dem NVR, wählen Sie ADVANCED CONFIG > NETWORK > WAN aus.
Push Status konfigurieren
Bevor Sie Push Status programmieren, beachten Sie, dass:
• Der NVR eingestellt ist wie auf der Abbildung gezeigt.
• Der NVR mit Internet verbunden ist.
Auf dem NVR
1.
Wählen Sie ADVANCED CONFIG > NOTIFY > PUSH STATUS aus.
2.
Stellen Sie "ACTION" auf ON.
V. 01 – 14/04/2014 50 ©Velleman nv
NVR4
3.
Wählen Sie die Ereignisse, wofür Sie eine Nachricht empfangen möchten, aus.
Auf dem Mobiltelefon
• Schalten Sie "Notifications" in EagleEyes ein.
• Für Informationen über EagleEyes, besuchen Sie www.velleman.eu
oder www.eagleeyescctv.com.
Einen Test durchführen
1.
Lösen Sie einen Alarm aus.
Zum Beispiel: stellen Sie VIDEO LOSS als Ereignis ein, und trennen Sie das Video danach, um zu sehen, ob
Sie eine Push Status-Meldung empfangen.
11.2
Die EagleEyes-App installieren
Vorbedingungen
Vor der Installation von EagleEyes zur Fernüberwachung auf Ihrem Handy, überprüfen Sie folgendes:
• Mobile Internetdienste sind abonniert und zur Nutzung auf Ihrem Handy verfügbar.
• Bemerkung: Internetzugang über Drahtlos- oder 3G-Netzwerke wird möglicherweise berechnet. Für
Einzelheiten zum Internetzugang wenden Sie sich bitte an Ihren örtlichen Netzwerk- oder Dienstanbieter.
• Sie haben IP-Adresse, Portnummer, Benutzername und Passwort zum Zugriff auf Netzwerkkamera vom
Internet notiert.
Die Software herunterladen
1.
Navigieren Sie auf Ihrem Handy zu www.eagleeyescctv.com und melden Sie sich an.
Laden Sie EagleEyes nicht auf Ihren Computer herunter. o
Für Android wählen Sie den Download-Link auf der Website. o
Für iPhone und iPad, sind zwei Versionen von EagleEyes verfügbar: EagleEyesHD Plus (kostenpflichtig) und EagleEyesHD Lite (kostenlos).
2.
Wählen Sie die gewünschte Version und Sie werden zum App Store zum Download der Anwendung geführt.
3.
Nach dem Download wird EagleEyes automatisch an der Speicherstelle installiert, an der auf Ihrem Handy standardgemäß alle Anwendungen gespeichert werden oder gemäß Ihren Spezifikationen.
12.
Technische Daten
Videokompressionsformat
Video-Eingang
Video-Ausgang
Aufnahmemodus
Multiplex-Betrieb
Audio I/O:
Erfassungsbereich
Erfassungsempfindlichkeit
H.264 / MPEG4 / MJPEG
1 LAN-Port, bis zu 16 Kanäle über Hub/Switch
HDMI-Ausgang 1920 x 1080 Pixel manuell / Timer / Bewegung / Alarm
Live Display, Aufnahme, Wiedergabe, Datensicherung und Netzwerk
Eingang: nur über IP-Kameras
Ausgang: 1 Audio-Ausgang
Gitter von 22 x 18 pro Kamera
10 einstellbare Variablen mit genauer Berechnung für
Bewegungserkennung
V. 01 – 14/04/2014 51 ©Velleman nv
NVR4
Pre-Alarm-Aufzeichnung
Backup-Geräte
Festplattenspeicherplatz ja
USB 2.0 Sicherungskopie und Sicherungskopie über das Netzwerk
SATA-Typ (eingebaut): unterstützt 3 x Festplatte, unterstützt HDD bis zu 3 TB (Festplatte nicht mitgeliefert) externe eSATA: externe Festplatte oder Disk Array (unterstützt Linux-
System)
Webschnittstelle
Fernüberwachung über Handy -
Smartphones
Fernüberwachung über Handy -
Rechner
Fern-Alarmmeldung
Netzverbindung
Stromversorgung
Verbrauch
Betriebstemperatur unterstützt die gratis CMS-Software (Windows & Mac OS) alle wichtigen Internetbrowser über Java, QuickTime und VLC Plug-In
(Internet Explorer, Firefox, Safari, Google Chrome)
- App: iPad, iPod touch, iPhone, Android-Smartphone und Tablet-PC
- verfügbar auf www.eagleeyescctv.com
- Login über alle Smartphone-Plattformen möglich (Apple, Android,
BlackBerry, Nokia Symbian und Windows Mobile)
- CMS (Central Management System): zentrale Verwaltung von bis zu
10 IP-Adressen (Windows & Mac OS)
- Webbrowser: Internet Explorer, Firefox, Google Chrome und Safari
über Java, Quicktime oder VLC Plug-in
SMS, E-Mail und FTP-Upload unterstützt TCP/IP, PPPoE, DHCP und DDNS
19 VDC / 3,42 A (mitgeliefert)
17.5 W (wenn keine Festplatte angeschlossen ist)
10 °C bis 40 °C
Systemwiederherstellung automatische Systemwiederherstellung nach Stromunterbrechung
Abmessungen 432 x 90 x 326 mm
Verwenden Sie dieses Gerät nur mit originellen Zubehörteilen. Velleman NV übernimmt keine
Haftung für Schaden oder Verletzungen bei (falscher) Anwendung dieses Gerätes.
Für mehr Informationen zu diesem Produkt und die neueste Version dieser Bedienungsanleitung, siehe www.velleman.eu.
Alle Änderungen ohne vorherige Ankündigung vorbehalten.
© URHEBERRECHT
Velleman NV besitzt das Urheberrecht für diese Bedienungsanleitung. Alle weltweiten Rechte vorbehalten.
Ohne vorherige schriftliche Genehmigung des Urhebers ist es nicht gestattet, diese Bedienungsanleitung ganz oder in Teilen zu reproduzieren, zu kopieren, zu übersetzen, zu bearbeiten oder zu speichern.
V. 01 – 14/04/2014 52 ©Velleman nv
Velleman® Service and Quality Warranty
Since its foundation in 1972, Velleman® acquired extensive experience in the electronics world and currently distributes its products in over 85 countries.
All our products fulfil strict quality requirements and legal stipulations in the EU. In order to ensure the quality, our products regularly go through an extra quality check, both by an internal quality department and by specialized external organisations. If, all precautionary measures notwithstanding, problems should occur, please make appeal to our warranty (see guarantee conditions).
General Warranty Conditions Concerning Consumer Products
(for EU):
• All consumer products are subject to a 24-month warranty on production flaws and defective material as from the original date of purchase.
• Velleman® can decide to replace an article with an equivalent article, or to refund the retail value totally or partially when the complaint is valid and a free repair or replacement of the article is impossible, or if the expenses are out of proportion.
You will be delivered a replacing article or a refund at the value of
100% of the purchase price in case of a flaw occurred in the first year after the date of purchase and delivery, or a replacing article at
50% of the purchase price or a refund at the value of 50% of the retail value in case of a flaw occurred in the second year after the date of purchase and delivery.
• Not covered by warranty:
- all direct or indirect damage caused after delivery to the article
(e.g. by oxidation, shocks, falls, dust, dirt, humidity...), and by the article, as well as its contents (e.g. data loss), compensation for loss of profits;
- consumable goods, parts or accessories that are subject to an aging process during normal use, such as batteries (rechargeable, nonrechargeable, built-in or replaceable), lamps, rubber parts, drive belts... (unlimited list);
- flaws resulting from fire, water damage, lightning, accident, natural disaster, etc.…;
- flaws caused deliberately, negligently or resulting from improper handling, negligent maintenance, abusive use or use contrary to the manufacturer’s instructions;
- damage caused by a commercial, professional or collective use of the article (the warranty validity will be reduced to six (6) months when the article is used professionally);
- damage resulting from an inappropriate packing and shipping of the article;
- all damage caused by modification, repair or alteration performed by a third party without written permission by Velleman®.
• Articles to be repaired must be delivered to your Velleman® dealer, solidly packed (preferably in the original packaging), and be completed with the original receipt of purchase and a clear flaw description.
• Hint: In order to save on cost and time, please reread the manual and check if the flaw is caused by obvious causes prior to presenting the article for repair. Note that returning a non-defective article can also involve handling costs.
• Repairs occurring after warranty expiration are subject to shipping costs.
• The above conditions are without prejudice to all commercial warranties.
The above enumeration is subject to modification according to the article (see article’s manual).
Velleman® service- en kwaliteitsgarantie
Velleman® heeft sinds zijn oprichting in 1972 een ruime ervaring opgebouwd in de elektronicawereld en verdeelt op dit moment producten in meer dan 85 landen. Al onze producten beantwoorden aan strikte kwaliteitseisen en aan de wettelijke bepalingen geldig in de EU. Om de kwaliteit te waarborgen, ondergaan onze producten op regelmatige tijdstippen een extra kwaliteitscontrole, zowel door onze eigen kwaliteitsafdeling als door externe gespecialiseerde organisaties. Mocht er ondanks deze voorzorgen toch een probleem optreden, dan kunt u steeds een beroep doen op onze waarborg (zie waarborgvoorwaarden).
Algemene waarborgvoorwaarden consumentengoederen
(voor Europese Unie):
• Op alle consumentengoederen geldt een garantieperiode van 24 maanden op productie- en materiaalfouten en dit vanaf de oorspronkelijke aankoopdatum.
• Indien de klacht gegrond is en een gratis reparatie of vervanging van een artikel onmogelijk is of indien de kosten hiervoor buiten verhouding zijn, kan Velleman® beslissen het desbetreffende artikel te vervangen door een gelijkwaardig artikel of de aankoopsom van het artikel gedeeltelijk of volledig terug te betalen. In dat geval krijgt u een vervangend product of terugbetaling ter waarde van 100% van de aankoopsom bij ontdekking van een gebrek tot één jaar na aankoop en levering, of een vervangend product tegen 50% van de kostprijs of terugbetaling van 50 % bij ontdekking na één jaar tot 2 jaar.
• Valt niet onder waarborg:
- alle rechtstreekse of onrechtstreekse schade na de levering veroorzaakt aan het toestel (bv. door oxidatie, schokken, val, stof, vuil, vocht...), en door het toestel, alsook zijn inhoud (bv. verlies van data), vergoeding voor eventuele winstderving.
- verbruiksgoederen, onderdelen of hulpstukken die onderhevig zijn aan veroudering door normaal gebruik zoals bv. batterijen (zowel oplaadbare als niet-oplaadbare, ingebouwd of vervangbaar), lampen, rubberen onderdelen, aandrijfriemen... (onbeperkte lijst).
- defecten ten gevolge van brand, waterschade, bliksem, ongevallen, natuurrampen, enz.
- defecten veroorzaakt door opzet, nalatigheid of door een onoordeelkundige behandeling, slecht onderhoud of abnormaal gebruik of gebruik van het toestel strijdig met de voorschriften van de fabrikant.
- schade ten gevolge van een commercieel, professioneel of collectief gebruik van het apparaat (bij professioneel gebruik wordt de garantieperiode herleid tot 6 maand).
- schade veroorzaakt door onvoldoende bescherming bij transport van het apparaat.
- alle schade door wijzigingen, reparaties of modificaties uitgevoerd door derden zonder toestemming van Velleman®.
• Toestellen dienen ter reparatie aangeboden te worden bij uw
Velleman®-verdeler. Het toestel dient vergezeld te zijn van het oorspronkelijke aankoopbewijs. Zorg voor een degelijke verpakking
(bij voorkeur de originele verpakking) en voeg een duidelijke foutomschrijving bij.
• Tip: alvorens het toestel voor reparatie aan te bieden, kijk nog eens na of er geen voor de hand liggende reden is waarom het toestel niet naar behoren werkt (zie handleiding). Op deze wijze kunt u kosten en tijd besparen. Denk eraan dat er ook voor niet-defecte toestellen een kost voor controle aangerekend kan worden.
• Bij reparaties buiten de waarborgperiode zullen transportkosten aangerekend worden.
• Elke commerciële garantie laat deze rechten onverminderd.
Bovenstaande opsomming kan eventueel aangepast worden naargelang de aard van het product (zie handleiding van het betreffende product).
Garantie de service et de qualité Velleman®
Depuis 1972, Velleman® a gagné une vaste expérience dans le secteur de l’électronique et est actuellement distributeur dans plus de
85 pays.
Tous nos produits répondent à des exigences de qualité rigoureuses et à des dispositions légales en vigueur dans l’UE. Afin de garantir la qualité, nous soumettons régulièrement nos produits à des contrôles de qualité supplémentaires, tant par notre propre service qualité que par un service qualité externe. Dans le cas improbable d’un défaut malgré toutes les précautions, il est possible d’invoquer notre garantie (voir les conditions de garantie).
Conditions générales concernant la garantie sur les produits grand public (pour l’UE) :
• tout produit grand public est garanti 24 mois contre tout vice de production ou de matériaux à dater du jour d’acquisition effective ;
• si la plainte est justifiée et que la réparation ou le remplacement d’un article est jugé impossible, ou lorsque les coûts s’avèrent disproportionnés, Velleman® s’autorise à remplacer ledit article par un article équivalent ou à rembourser la totalité ou une partie du prix d’achat. Le cas échéant, il vous sera consenti un article de remplacement ou le remboursement complet du prix d’achat lors d’un défaut dans un délai de 1 an après l’achat et la livraison, ou un article de remplacement moyennant 50% du prix d’achat ou le remboursement de 50% du prix d’achat lors d’un défaut après 1 à 2 ans.
• sont par conséquent exclus :
- tout dommage direct ou indirect survenu à l’article après livraison
(p.ex. dommage lié à l’oxydation, choc, chute, poussière, sable, impureté…) et provoqué par l’appareil, ainsi que son contenu (p.ex. perte de données) et une indemnisation éventuelle pour perte de revenus ;
- toute pièce ou accessoire nécessitant un remplacement causé par un usage normal comme p.ex. piles (rechargeables comme non rechargeables, intégrées ou remplaçables), ampoules, pièces en caoutchouc, courroies… (liste illimitée) ;
- tout dommage qui résulte d’un incendie, de la foudre, d’un accident, d’une catastrophe naturelle, etc. ;
- out dommage provoqué par une négligence, volontaire ou non, une utilisation ou un entretien incorrect, ou une utilisation de l’appareil contraire aux prescriptions du fabricant ;
- tout dommage à cause d’une utilisation commerciale, professionnelle ou collective de l’appareil (la période de garantie sera réduite à 6 mois lors d’une utilisation professionnelle) ;
- tout dommage à l’appareil qui résulte d’une utilisation incorrecte ou différente que celle pour laquelle il a été initialement prévu comme décrit dans la notice ;
- tout dommage engendré par un retour de l’appareil emballé dans un conditionnement non ou insuffisamment protégé.
- toute réparation ou modification effectuée par une tierce personne sans l’autorisation explicite de SA Velleman® ; - frais de transport de et vers Velleman® si l’appareil n’est plus couvert sous la garantie.
• toute réparation sera fournie par l’endroit de l’achat. L’appareil doit nécessairement être accompagné du bon d’achat d’origine et être dûment conditionné (de préférence dans l’emballage d’origine avec mention du défaut) ;
• tuyau : il est conseillé de consulter la notice et de contrôler câbles, piles, etc. avant de retourner l’appareil. Un appareil retourné jugé défectueux qui s’avère en bon état de marche pourra faire l’objet d’une note de frais à charge du consommateur ;
• une réparation effectuée en-dehors de la période de garantie fera l’objet de frais de transport ;
• toute garantie commerciale ne porte pas atteinte aux conditions susmentionnées.
La liste susmentionnée peut être sujette à une complémentation selon le type de l’article et être mentionnée dans la notice d’emploi.
Garantía de servicio y calidad Velleman®
Desde su fundación en 1972 Velleman® ha adquirido una amplia experiencia como distribuidor en el sector de la electrónica en más de
85 países. Todos nuestros productos responden a normas de calidad rigurosas y disposiciones legales vigentes en la UE. Para garantizar la calidad, sometemos nuestros productos regularmente a controles de calidad adicionales, tanto a través de nuestro propio servicio de calidad como de un servicio de calidad externo. En el caso improbable de que surgieran problemas a pesar de todas las precauciones, es posible recurrir a nuestra garantía (véase las condiciones de garantía).
Condiciones generales referentes a la garantía sobre productos de venta al público (para la Unión Europea):
• Todos los productos de venta al público tienen un perìodo de garantía de 24 meses contra errores de producción o errores en materiales desde la adquisición original;
• Si la queja está fundada y si la reparación o sustitución de un artículo no es posible, o si los gastos son desproporcionados,
Velleman® autoriza reemplazar el artículo por un artículo equivalente o reembolsar la totalidad o una parte del precio de compra. En este caso, usted recibirá un artículo de recambio o el reembolso completo del precio de compra si encuentra algún fallo hasta un año después de la compra y entrega, o un artículo de recambio al 50% del precio de compra o el reembolso del 50% del precio de compra si encuentra un fallo después de 1 año y hasta los 2 años después de la compra y entrega.
Por consiguiente, están excluidos entre otras cosas:
- todos los daños causados directa o indirectamente al aparato (p.ej. por oxidación, choques, caída,...) y a su contenido (p.ej. pérdida de datos) después de la entrega y causados por el aparato, y cualquier indemnización por posible pérdida de ganancias;
- partes o accesorios, que estén expuestos al desgaste causado por un uso normal, como por ejemplo baterías (tanto recargables como no recargables, incorporadas o reemplazables), bombillas, partes de goma, etc. (lista ilimitada);
- defectos causados por un incendio, daños causados por el agua, rayos, accidentes, catástrofes naturales, etc.;
- defectos causados a conciencia, descuido o por malos tratos, un mantenimiento inapropiado o un uso anormal del aparato contrario a las instrucciones del fabricante;
- daños causados por un uso comercial, profesional o colectivo del aparato (el período de garantía se reducirá a 6 meses con uso profesional);
- daños causados por un uso incorrecto o un uso ajeno al que está previsto el producto inicialmente como está descrito en el manual del usuario;
- daños causados por una protección insuficiente al transportar el aparato.
- daños causados por reparaciones o modificaciones efectuadas por una tercera persona sin la autorización explícita de Velleman®;
- se calcula gastos de transporte de y a Velleman® si el aparato ya no está cubierto por la garantía.
• Cualquier artículo que tenga que ser reparado tendrá que ser devuelto a su distribuidor Velleman®. Devuelva el aparato con la factura de compra original y transpórtelo en un embalaje sólido
(preferentemente el embalaje original). Incluya también una buena descripción del fallo;
• Consejo: Lea el manual del usuario y controle los cables, las pilas, etc. antes de devolver el aparato. Si no se encuentra un defecto en el artículo los gastos podrían correr a cargo del cliente;
• Los gastos de transporte correrán a carga del cliente para una reparación efectuada fuera del período de garantía.
• Cualquier gesto comercial no disminuye estos derechos.
La lista previamente mencionada puede ser adaptada según el tipo de artículo (véase el manual del usuario del artículo en cuestión).
Velleman® Service- und Qualitätsgarantie
Seit der Gründung in 1972 hat Velleman® sehr viel Erfahrung als
Verteiler in der Elektronikwelt in über 85 Ländern aufgebaut.
Alle Produkte entsprechen den strengen Qualitätsforderungen und gesetzlichen Anforderungen in der EU. Um die Qualität zu gewährleisten werden unsere Produkte regelmäßig einer zusätzlichen
Qualitätskontrolle unterworfen, sowohl von unserer eigenen
Qualitätsabteilung als auch von externen spezialisierten
Organisationen. Sollten, trotz aller Vorsichtsmaßnahmen, Probleme auftreten, nehmen Sie bitte die Garantie in Anspruch (siehe
Garantiebedingungen).
Allgemeine Garantiebedingungen in Bezug auf Konsumgüter
(für die Europäische Union):
• Alle Produkte haben für Material- oder Herstellungsfehler eine
Garantieperiode von 24 Monaten ab Verkaufsdatum.
• Wenn die Klage berechtigt ist und falls eine kostenlose Reparatur oder ein Austausch des Gerätes unmöglich ist, oder wenn die Kosten dafür unverhältnismäßig sind, kann Velleman® sich darüber entscheiden, dieses Produkt durch ein gleiches Produkt zu ersetzen oder die Kaufsumme ganz oder teilweise zurückzuzahlen. In diesem
Fall erhalten Sie ein Ersatzprodukt oder eine Rückzahlung im Werte von 100% der Kaufsumme im Falle eines Defektes bis zu 1 Jahr nach
Kauf oder Lieferung, oder Sie bekommen ein Ersatzprodukt im Werte von 50% der Kaufsumme oder eine Rückzahlung im Werte von 50 % im Falle eines Defektes im zweiten Jahr.
• Von der Garantie ausgeschlossen sind:
- alle direkten oder indirekten Schäden, die nach Lieferung am Gerät und durch das Gerät verursacht werden (z.B. Oxidation, Stöße, Fall,
Staub, Schmutz, Feuchtigkeit, ...), sowie auch der Inhalt (z.B.
Datenverlust), Entschädigung für eventuellen Gewinnausfall.
- Verbrauchsgüter, Teile oder Zubehörteile, die durch normalen
Gebrauch dem Verschleiß ausgesetzt sind, wie z.B. Batterien (nicht nur aufladbare, sondern auch nicht aufladbare, eingebaute oder ersetzbare), Lampen, Gummiteile, Treibriemen, usw. (unbeschränkte
Liste).
- Schäden verursacht durch Brandschaden, Wasserschaden, Blitz,
Unfälle, Naturkatastrophen, usw.
- Schäden verursacht durch absichtliche, nachlässige oder unsachgemäße Anwendung, schlechte Wartung, zweckentfremdete
Anwendung oder Nichtbeachtung von Benutzerhinweisen in der
Bedienungsanleitung.
- Schäden infolge einer kommerziellen, professionellen oder kollektiven Anwendung des Gerätes (bei gewerblicher Anwendung wird die Garantieperiode auf 6 Monate zurückgeführt).
- Schäden verursacht durch eine unsachgemäße Verpackung und unsachgemäßen Transport des Gerätes.
- alle Schäden verursacht durch unautorisierte Änderungen,
Reparaturen oder Modifikationen, die von einem Dritten ohne
Erlaubnis von Velleman® vorgenommen werden.
• Im Fall einer Reparatur, wenden Sie sich an Ihren Velleman®-
Verteiler. Legen Sie das Produkt ordnungsgemäß verpackt
(vorzugsweise die Originalverpackung) und mit dem Original-
Kaufbeleg vor. Fügen Sie eine deutliche Fehlerbeschreibung hinzu.
• Hinweis: Um Kosten und Zeit zu sparen, lesen Sie die
Bedienungsanleitung nochmals und überprüfen Sie, ob es keinen auf de Hand liegenden Grund gibt, ehe Sie das Gerät zur Reparatur zurückschicken. Stellt sich bei der Überprüfung des Gerätes heraus, dass kein Geräteschaden vorliegt, könnte dem Kunden eine
Untersuchungspauschale berechnet.
• Für Reparaturen nach Ablauf der Garantiefrist werden
Transportkosten berechnet.
• Jede kommerzielle Garantie lässt diese Rechte unberührt.
Die oben stehende Aufzählung kann eventuell angepasst werden gemäß der Art des Produktes (siehe
Bedienungsanleitung des Gerätes).
Made in Taiwan
Imported by Velleman nv
Legen Heirweg 33, 9890 Gavere, Belgium www.velleman.eu
Herunterladen
Werbung