advertisement
ESSENCE FAN OPERATION
CAUTION: The fan will automatically restart at the last operating speed when power is restored.
Note: The fan may take 30–60 seconds to start rotating after it is turned on. It is normal to see “cogging”
(abrupt direction changes) as the fan positions itself relative to the motor stator.
Wired Wall Controller
To start the fan, turn the control knob clockwise.
To stop the fan, turn the control knob counterclockwise.
LED indicator
To increase fan speed, turn the control knob clockwise. To decrease fan speed, turn the control knob counterclockwise.
Note: When the fan is turned on, the LED indicator at the top of the controller is lit. The LED will flash an error code if there is a problem with the fan.
Wireless Wall Controller
Ensure the power cutoff tab is flush with the wall controller face. If it is not, use a pen or similar object to push it into position.
To start the fan, press the power button at the bottom of the controller.
To stop the fan, press the power button.
To increase fan speed, press the plus (+) button. To decrease fan speed, press the minus (-) button.
Note: The power button flashes when the wireless wall controller is having trouble communicating with the fan(s).
Power cutoff tab
© 2018 DELTA T LLC ALL RIGHTS RESERVED.
ESS-INST-251-ENG-01 REV. B 02/07/2020
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Key Features
- Automatic restart at last operating speed
- LED indicator for error codes
- Wired and wireless control options
- Precise fan speed adjustment
- Power cutoff tab for safety
Related manuals
Frequently Answers and Questions
How do I start the fan using the wired wall controller?
How do I increase the fan speed using the wireless wall controller?
What does the flashing power button on the wireless wall controller indicate?
advertisement