Haier L32A9A-A Operating Instructions Manual
Add to my manuals
12 Pages
Haier L32A9A-A is a wide-angle LCD color TV with high contrast, NICAM, AAA function, and HDMI input. It allows for auto and manual search of TV programs, fine-tuning, and the ability to skip and exchange channels. The TV provides various picture and sound adjustment options, including different picture and sound modes, noise reduction, and sound effects control. It also features a sleep timer, PIP (picture-in-picture) setting, and the ability to connect external audio and video equipment. Additionally, it can be used as a computer display.
advertisement
01
0090508792
LCD COLOR TELEVISION
OPERATING
INSTRUCTIONS
◆
Wide view-angle display, high contrast
◆
NICAM
◆
AAA function
◆
HDMI input
CONTENTS
Warning and caution...........................................................................................2
Buttons and interface position............................................................................5
Front control panel.........................................................................................5
Back interface.................................................................................................5
Wall mount switching support assembly instructions....................................6
Preparation for remote control..........................................................................7
Remote control panel..........................................................................................8
Basic operation.................................................................................................9
Power on/off TV............................................................................................9
TV program selection and volume adjustment..............................................9
Recall.............................................................................................................9
Mute function................................................................................................9
OSD language selection.................................................................................9
Screen display...................................................................................................10
TV program setting..........................................................................................11
Auto search...................................................................................................11
Manual search...............................................................................................11
Fine tune.......................................................................................................12
Skip...............................................................................................................12
Exchange.......................................................................................................13
Image control....................................................................................................13
Set your favourite picture mode....................................................................13
Noise reduce..................................................................................................13
Picture mode /sound mode selection.............................................................14
Sound control...................................................................................................14
Sound effect control......................................................................................14
System setting function....................................................................................14
OSD background setting...............................................................................14
Signal source setting......................................................................................15
Screen display picture zoom setting..............................................................15
Other setting function.......................................................................................15
Sleep timer setting.........................................................................................15
PIP setting......................................................................................................16
Sound source setting......................................................................................16
Color temperature..........................................................................................17
Digital filter setting........................................................................................17
AAA setting...................................................................................................17
HDMI.............................................................................................................18
External audio and video equipment connection..............................................19
Using your TV as a computer display..............................................................20
Specifications...................................................................................................21
Trouble shooting guide.......................................................................................22
1
WARNING AND CAUTION
CAUTION
!!
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE
.
FOR
ANY PROBLEM, REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
THERE IS A LIGHTNING ARROW SYMBOL IN THE TRIANGLE:
THIS SYMBOL INDICATES HIGH VOLTAGE IS PRESENT INSIDE.
IT IS DANGEROUS TO MAKE ANY KIND OF CONTACT WITH ANY
INSIDE PART OF THIS PRODUCT.
THERE IS A EXCALMATION MARK IN THE TRIANGLE: THIS
SYMBOL ALERTS YOU THAT IMPORTANT LITERATURE
CONCERNING. OPERATION AND MAINTENANCE HAS BEEN
INCLUDED WITH THIS PRODUCT.
!!
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK AND FIRE,
DO NOT PUT THE TV SET NEAR SOURCES OF HUMIDITY.
DO NOT USE ANY ABRASIVE CLEANSERS WHICH MAY
SCRATCH OR DAMAGE THE LCD SCREEN. AVOID CONTACT
WITH OBJECTS THAT MAY SCRATCH THE LCD SCREEN.
NOTE: SERVICING THE UNIT YOURSELF IS UNAUTHORIZED
AND COULD LEAD TO INJURY OR PRODUCT DAMAGE.
2
BUTTONS AND INTERFACE POSITION
Front control panel
Remote sensor
Power indicator
Back interface
HDMI
1 11 10 9
1. Power input socket
2. Antenna input
3. AV2 input
4. AV1 input
5. S-VIDEO input
6. YPbPr or S-VIDEO audio input
7. AV output
8. YPbPr input
9. VGA audio input interface
10. VGA input
11. HDMI input
8
MENU
TV/AV
CH-
CH+
VOL-
VOL+
MENU
TV/AV
CH-
CH+
VOL-
VOL+
Menu button
TV/AV switch button
Program down/up button
Volume down/up button
Power button
7
6
5
3
4
1
2
5
WALL MOUNT SWITCHING SUPPORT ASSEMBLY INSTRUCTIONS
Switching support
Switching support
Airproof board
Base
(1) In order not to scratch the TV set, it is recommended putting the TV set
with face down on the soft and clean blanket.
(2)Disassemble the six screws from base and remove the base.(This item will be
cancelled if the product is without base.)
(3)Mount the airproof board (included in the accessory bag).
(4)Take out the switching support from the accessory bag, and use four M5 × 16
screws(included in the accessory bag) to fix the switching support on the
back of complete set.
(5)The remaining four M5 × 16 screws in the accessory bag are used to mount the
wall mount parts.(The wall mount parts are in the wall mount box, the four
M5 × 16 screws replace the four M4 × 20 screws in the carton of wall mount
bracket.)
(6)After completing the above operations, the complete set can be mounted
on the wall mount bracket.(Wall mount bracket operations refer to the
assembly instructions of it.)
Note: 1. The arrow indicates the position of screw.
2. This operation is only used before mounting the bracket.
3. Wall mount bracket is additional purchase.
6
PREPARATION FOR REMOTE CONTROL
Remote control installation
1. According to the figure display below, place the remote control with face down,
then open the cover of battery apartment.
2. As in the figure display below, install two AA batteries. (The + and - symbol of
battery must match with the marks on the remote).
3.Close the cover of battery apartment.
1
2
3
Cautions for using remote control
Confirm there is no object between the remote control and the remote sensor of TV set.
Sunshine or other strong light will interfere the signal sent by the remote control. In this situation turn the TV set to avoid the direct light source.
Do not put the remote control in direct heat or a damp place, or potential damage to the remote may occur.
Please use two AA 1.5V batteries.
Do not mix battery types.
Install the batteries as the correct polarities.
Do not use the rechargeable batteries.
7
REMOTE CONTROL PANEL
MUTE TV/AV SOUND POWER
7
6
2
3
MAIN/SUB PIP AAA DISPLAY
11
1
4
2
5
3
6
7
CHILD LOCK
P.STD
8 9
RECALL
0
S.STD
12
CH+
14 VOLMENU VOL+
17
25
20
CH-
C.SYS
↑
S.SYS
←
I-II
↓
STILL
ZOOM SLEEP SIZE
→
SCAN
←
BACK
21
22
1
8
4
5
10
13
19
24
23
18
26
27
9
15
16
Buttons and Descriptions
1
2
3
4
5
6
7
8
Power button
Mute button
TV/AV switch button
Display button
Dynamic AAA HDTV on/off button
PIP function on/off button
PIP main/sub picture switch button
PIP sound selection button
9
10
One digit selection button
Program recall button
11 Child lock button
13
Picture mode selection button
Sound mode selection button
14
Program up/down button, direction
15 selection button
Volume up/down button, direction
16
17
18
19
20 selection button
Menu call/selection button
Color system selection button
Sound system selection button
Program scan button
Picture still button
21
This function is not available
22 Picture size selection button
23 Sleep timer button
24
25
This function is not available
This function is not available
26
27
Nicam button
This function is not available
HYF-35R
8
MUTE TV/AV SOUND POWER
BASIC OPERATION
MAIN/SUB PIP AAA DISPLAY
POWER ON/OFF TV
Standby set: first connect the power supply wire, then turn the power switch on the top of TV set on.
1. If the TV set is in standby status, pressing power
switch on the remote control or TV set can
cancel the standby status, then enter the power on
status.
2. Pressing power switch on the remote control or
the TV set again, the TV set will enter standby
status.
TV PROGRAM SELECTION AND VOLUME
ADJUSTMENT
You can use CH+/- button or direct-digit choosing button to select the TV channel number.
Press VOL+/- button to adjust the volume.
RECALL
Pressing RECALL button can switch the channel to the last channel you watched.
MUTE FUNCTION
1. Press MUTE button to shut off the TV sound, the
screen displays mute mark.
2. Press MUTE button again or VOL+ button to turn
on the TV sound.
OSD
LANGUAGE ENGLISH
H-POSITION
V-POSITION
DURATION
TRANSPARENCY
MOVE SELECT MENU EXIT
OSD LANGUAGE SELECTION
Select the LANGUAGE item in the menu.
1.Press MENU button to make the main menu display.
2.Press CH+/- button to select OSD menu.
3.Press VOL+/- button enter the OSD menu.
4. Press CH+/- button to select LANGUAGE item.
5. Press VOL+/- button to select the language you need.
9
SCREEN DISPLAY
For your convenient operation and in order to know the TV set, we offer the below menus.
Picture setting menu
Source setting menu
PICTURE
PICTURE MODE PERSONAL
CONTRAST
BRIGHTNESS
SATURATION
TINT
SHARPNESS
NOISE REDUCE
SIZE MODE
STRONG
FULL
MOVE SELECT MENU EXIT
Sound setting menu
SOURCE
PICTURE SOURCE TV
PIP MODE OFF
SUB PICTURE VGA
COLOR SYSTEM AUTO
SOUND SYSTEM
AUTO SEARCH
MANUAL SEARCH
BG
MOVE SELECT MENU EXIT
Menu setting menu
SOUND
SOUND SOURCE MAIN
SOUND MODE NEWS
BALANCE
EQUALIZER
OSD
LANGUAGE ENGLISH
H-POSITION
V-POSITION
DURATION
TRANSPARENCY
MOVE SELECT MENU EXIT
MOVE SELECT MENU EXIT
Function setting menu
FUNCTION
CLOCK 00:12
TIME ON --:--
TIME OFF --:--
SLEEP TIMER OFF
COLOR TEMP USER
D FILTER
AAA ON
MOVE SELECT MENU EXIT
Operation instructions
The real display may be different from the above menus, if you need adjust, please do as follows:
1.Press MENU button to open the menu, use CH+/- button to select every menu
separately, use VOL+/- button to enter.
2.Press CH+/- button to select the item needs adjust.
3.Press VOL+/- button to adjust the selected item, or enter the next menu.
4.Press MENU button to return the last menu or exit the screen menu display.
Note: “press MENU button to select the menu
”
operation in the user’s manual, please
refer to these operation instructions.
10
SOURCE
PICTURE SOURCE TV
PIP MODE OFF
SUB PICTURE VGA
COLOR SYSTEM AUTO
SOUND SYSTEM
AUTO SEARCH
MANUAL SEARCH
BG
MOVE SELECT MENU EXIT
TV PROGRAM SETTING
AUTO SEARCH
Using AUTO SEARCH can search all receiving programs. We recommend using auto search to search the program when you use this TV set for the first time, before auto search, please confirm the sound system is BG or DK.
1.Press MENU button to make the main menu display.
2.Press CH+/- button to select SOURCE menu.
3.Press VOL+/- button enter the SOURCE menu.
4.Press CH+/- button to select AUTO SEARCH.
5.Press VOL+/- button to start searching, press MENU
button to finish auto search.
Note: The order of the auto search is due to the
frequency of the program, generally speaking,
it is used only at the first time you search the
program, and once the order of the program has
been confirmed, you don’t have to use this
function, otherwise the order of the program
will be changed.
SOURCE
CURRENT CHANNEL 10
SKIP OFF
TARGET CHANNEL 10
EXCHANGE
AFC OFF
FINE TUNE
SEARCH NEXT 471.2MHZ
MOVE SELECT MENU EXIT
MANUAL SEARCH
Manual search can search and order the program freely.
1.Press MENU button to make the main menu display.
2.Press CH+/- button to select SOURCE menu.
3.Press VOL+/- button enter the SOURCE menu.
4. Press CH+/- button to select MANUAL SEARCH,
press VOL+/- button to enter the next menu.
5. Press CH+/- button to select SEARCH NEXT.
6. Press VOL+/- button to start searching, pressing
VOL+ button is used to search the higher frequency
channel, pressing VOL- button is used to search the
lower frequency channel, when you have searched
a program, the searching will stop automatically.
You can press VOL+/- button to go on searching or
press MENU button to exit.
Note: During searching, it may appear black screen
because of change of signal, it is normal, it will
recover after finishing searching.
11
TV PROGRAM SETTING
FINE TUNE
When you can’t get a satisfactory picture effect, you can fine tune to obtain.
1.Press MENU button to make the main menu display.
2.Press CH+/- button to select SOURCE menu.
3.Press VOL+/- button enter the SOURCE menu.
4.Press CH+/- button to select MANUAL
SEARCH, press VOL+/- button to enter the next
menu.
5. Press CH+/- button to select FINE TUNE.
6. Press VOL+/- button to start fine tune until you
obtain the best picture and sound, then loose
the button, press MENU button to exit.
SOURCE
CURRENT CHANNEL 10
SKIP OFF
TARGET CHANNEL 10
EXCHANGE
AFC OFF
FINE TUNE
SEARCH NEXT 471.2MHZ
MOVE SELECT MENU EXIT
SKIP
1. Select the program number you need skip.
2.Press MENU button to make the main menu display.
3.Press CH+/- button to select SOURCE menu.
4.Press VOL+/- button enter the SOURCE menu.
5. Press CH+/- button to select the MANUAL
SEARCH, press VOL+/- button to enter the
next menu.
6. Press CH+/- button to select SKIP, press
VOL+/- button to select ON.
7. Press MENU button to shut off the menu.
When you use CH+/- button to select channel, this channel number will be skipped. But you can still use one direct-digit choosing button to select the skipped channel number.
Note: How to recover the skipped channel number
1. Press direct-digit choosing button to select the
channel number that needs recover.
2.Press MENU button to make the main menu display.
3.Press CH+/- button to select SOURCE menu.
4.Press VOL+/- button enter the SOURCE menu.
5. Press CH+/- button to select the MANUAL
SEARCH, press VOL+/- button to enter the
next menu.
6. Press CH+/- button to select SKIP, press
VOL+/- button to select OFF.
12
SOURCE
CURRENT CHANNEL 10
SKIP OFF
TARGET CHANNEL 10
EXCHANGE
AFC OFF
FINE TUNE
SEARCH NEXT 471.2MHZ
MOVE SELECT MENU EXIT
SOURCE
CURRENT CHANNEL 10
SKIP OFF
TARGET CHANNEL 10
EXCHANGE
AFC OFF
FINE TUNE
SEARCH NEXT 471.2MHZ
MOVE SELECT MENU EXIT
MOVE
SOURCE
TV PROGRAM SETTING
CURRENT CHANNEL 15
SKIP OFF
TARGET CHANNEL 28
EXCHANGE
AFC OFF
FINE TUNE
SEARCH NEXT 471.2MHZ
SELECT MENU EXIT
EXCHANGE
1.Press MENU button to make the main menu display.
2.Press CH+/- button to select SOURCE menu.
3.Press VOL+/- button enter the SOURCE menu.
4.Press CH+/- button to select MANUAL SEARCH,
press VOL+/- button to enter the next menu.
5.Press CH+/- button to select TARGET CHANNEL,
press VOL+/- button to select the channel you need
exchange.
6.Press CH+/- button to select EXCHANGE, press
VOL+/- button to exchange, as figure, exchange
the current channel number 15 to channel number 28.
7. Press MENU button to save and exit.
Note: Please shut off the connected but not used signal
source in order not to affect normal watching.
PICTURE
PICTURE MODE PERSONAL
CONTRAST
BRIGHTNESS
SATURATION
TINT
SHARPNESS
NOISE REDUCE
SIZE MODE
STRONG
FULL
IMAGE CONTROL
SET YOUR FAVOURITE PICTURE MODE
SET YOUR FAVOURITE PICTURE MODE
1.Press MENU button to make the PICTURE menu
display.
2.Press VOL+/- button enter the PICTURE menu.
3.Press CH+/- button to select the item that needs
adjust.
4. Press VOL+/- button to adjust the selected item,
the detailed adjustment is as following table.
The table of picture item adjustment effect
Items VOLVOL+
MOVE SELECT MENU EXIT
Contrast
Brightness
Saturation
Weak
Dark
Light
Strong
Bright
Thick
* Tint
Sharpness
Green
Soft
Red
Sharp
Note: TINT is only valid in N system.
PICTURE
PICTURE MODE PERSONAL
CONTRAST
BRIGHTNESS
SATURATION
TINT
SHARPNESS
NOISE REDUCE
SIZE MODE
STRONG
FULL
MOVE SELECT MENU EXIT
NOISE REDUCE
Noise reduce can decrease the noise of picture
1.Press MENU button to make the PICTURE menu
display.
2.Press VOL+/- button enter the PICTURE menu.
3.Press CH+/- button to select the NOISE REDUCE.
4.Press VOL+/- button to select OFF, WEAK or
STRONG as your require.
13
IMAGE CONTROL
PICTURE MODE/SOUND MODE SELECTION
Press P.STD button on the remote control continually, the following four picture modes can be selected in turn.
NATURAL BRIGHT PERSONAL SOFT
NATURAL: common mode.
SOFT: the image effect is soft.
USER: set the image effect you like.
BRIGHT: suitable for sport image.
Press S.STD button on the remote control continually, the following four sound modes can be selected in turn.
NORMAL
MUSIC PERSONAL
NEWS
You can also enter picture and sound menu to adjust.
CHILD LOCK
P.STD
CHILD LOCK
P.STD
0
0
RECALL
S.STD
RECALL
S.STD
SOUND CONTROL
SOUND EFFECT CONTROL
You can select your favourite sound modes, and adjust the BALANCE and EQUALIZER of sound.
1. Press MENU button to make the main menu display.
2. Press CH+/- button to select the SOUND menu.
3. Press VOL+/- button to enter the SOUND menu.
4. Press CH+/- button to select the sound item you need set.
5. Press VOL+/- button to adjust the selected item.
BALANCE: Press VOL+/- button to enter adjustment, use VOL+/- button to adjust the balance of left and right sound.
EQUALIZER: Press VOL+/- button to enter EQUALIZER set menu, use VOL+/- button to select every different frequency, use CH+/- button to adjust.
Note: Sound source only can be adjusted in PIP mode.
SOUND
SOUND SOURCE MAIN
SOUND MODE NEWS
BALANCE
EQUALIZER
SOUND
50 75 100 300 1K 3K 5K 10K 15K
MOVE SELECT MENU EXIT
SYSTEM SETTING FUNCTION
OSD BACKGROUND SETTING
The higher of the transparency set value is, the higher of the OSD transparency is, whereas, the transparency is lower.
1.Press MENU button to make the main menu display.
2.Press CH+/- button to select OSD setting menu.
3.Press VOL+/- button to enter the OSD menu.
4.Press CH+/- button to select the TRANSPARENCY item.
5.Press VOL+/- button to set the transparency value.
14
OSD
LANGUAGE ENGLISH
H-POSITION
V-POSITION
DURATION
TRANSPARENCY
MOVE SELECT MENU EXIT
TRANSPARENCY
MOVE
63
SELECT MENU EXIT
SYSTEM SETTING FUNCTION
SOURCE
PICTURE SOURCE TV
PIP MODE OFF
SUB PICTURE VGA
COLOR SYSTEM AUTO
SOUND SYSTEM
AUTO SEARCH
MANUAL SEARCH
BG
MOVE SELECT MENU EXIT
PICTURE
PICTURE MODE PERSONAL
CONTRAST
BRIGHTNESS
SATURATION
TINT
SHARPNESS
NOISE REDUCE
SIZE MODE
STRONG
FULL
MOVE SELECT MENU EXIT
SIGNAL SOURCE SETTING
There is different signal source mode in this TV set, you can select according to your require: TV,
AV1, AV2, S-VIDEO, YPBPR, VGA, HDMI.
1.Press MENU button to make the main menu display.
2.Press CH+/- button to select SOURCE menu.
3.Press VOL+/- button enter the SOURCE menu.
4 .Press CH+/- button to select PICTURE SOURCE
item.
5.Press VOL+/- button to select the signal source
mode you need.
6.You can press TV/AV button on the remote
control to select directly.
SCREEN DISPLAY PICTURE ZOOM SETTING
There is different screen display picture zoom, you can select according to your require: FULL,
ZOOM1, ZOOM2, NORMAL.
1.Press MENU button to make the PICTURE menu
display.
2.Press VOL+/- button enter the PICTURE menu.
3.Press CH+/- button to select SIZE MODE.
4.Press VOL+/- button to select the zoom you need.
5.You can press ZOOM button on the remote control
to switch.
OTHER SETTING FUNCTION
FUNCTION
CLOCK 00:12
TIME ON --:--
TIME OFF --:--
SLEEP TIMER OFF
COLOR TEMP USER
D FILTER
AAA ON
MOVE SELECT MENU EXIT
SLEEP TIMER SETTING
After you set the sleep timer, the TV set will count from the setting time, when the count time is coming, the TV set will turn off automatically.
Press SLEEP button to enter off time set, you can select the certain time: OFF, 15Min, 30Min, 60Min...
240Min, after setting, the TV set will start counting.
Note: if you want to see the off time you set, press
SLEEP button. If you want to cancel the sleep time set, follow the above procedures, set the time OFF.
15
OTHER SETTING FUNCTION
PIP SETTING
This TV set support PIP function, it can display picture of two sources at the same time.
1.Press MENU button to make the main menu display.
2.Press CH+/- button to select SOURCE menu.
3.Press VOL+/- button enter the SOURCE menu.
elect PIP mode, press VOL+/-
button to select P1S1, P1S2, P2S1, P2S2, P3S1, P3S2,
P4S1or P4S2 mode, open PIP function.
5.
Press CH+/- button to s elect PICTURE SOURCE, press
VOL+/- button to change the input source of main picture,
such as TV, AV1, AV2 and so on.
6.
Press CH+/- button to s elect SUB PICTURE source, press
VOL+/- button to change the input source of sub picture,
such as VGA, YPBPR, HDMI and so on.
Note:
1. After switching the main picture source, it will
shut off the PIP function, if need, you can open
this function again.
2. The following two suit
can use PIP function,
the same suit source
SOURCE1 TV, AV1, AV2, S-VIDEO
can not use PIP
function, source1
SOURCE2
VGA, YPBPR, HDMI
and source2 can switch.
3.You can press PIP button on the remote control
to turn on or turn off the PIP function.
4.You can press MAIN/SUB button on the remote
control to switch the main picture and sub picture.
SOUND SOURCE SETTING
After the PIP function is open, this item is activated, you can select the main picture sound or sub picture sound of current broadcasting sound.
1.Press MENU button to make the main menu display.
2.Press CH+/- button to select SOUND menu.
3.Press VOL+/- button enter the SOUND menu.
4.Press CH+/- button to select SOUND SOURCE.
5.Press VOL+/- button to change the current sound to
main picture sound or sub picture sound.
Note:
1.You can also press SOUND button on the remote
control to switch the main picture sound or sub
picture sound.
2.After switching the sound to sub picture sound, you
can switch the source in sub picture.
16
SOURCE
PICTURE SOURCE TV
PIP MODE OFF
SUB PICTURE VGA
COLOR SYSTEM AUTO
SOUND SYSTEM
AUTO SEARCH
MANUAL SEARCH
BG
MOVE
SOUND
SOUND SOURCE MAIN
SOUND MODE NEWS
BALANCE
EQUALIZER
MOVE
SELECT MENU EXIT
SELECT MENU EXIT
OTHER SETTING FUNCTION
FUNCTION
CLOCK 00:12
TIME ON --:--
TIME OFF --:--
SLEEP TIMER OFF
COLOR TEMP USER
D FILTER
AAA ON
MOVE SELECT MENU EXIT
COLOR TEMPERATURE
1.Press MENU button to make the main menu display.
2.Press CH+/- button to select FUNCTION menu.
3.Press VOL+/- button enter the FUNCTION menu.
4.Press CH+/- button to select COLOR TEMP.
5.Press VOL+/- button to select DEFAULT
→
6500K
→
→
7300K
→
8500K
→
9300K
→
USER
Note: PERSONAL is the color temperature of picture
you set through D FILTER.
FUNCTION
CLOCK 00:12
TIME ON --:--
TIME OFF --:--
SLEEP TIMER OFF
COLOR TEMP USER
D FILTER
AAA ON
MOVE SELECT MENU EXIT
FUNCTION
CLOCK 00:12
TIME ON --:--
TIME OFF --:--
SLEEP TIMER OFF
COLOR TEMP USER
D FILTER
AAA ON
MOVE SELECT MENU EXIT
DIGITAL FILTER SETTING
Use D FILTER can adjust the color temperature exactly.
1.Press MENU button to make the main menu display.
2.Press CH+/- button to select FUNCTION menu.
3.Press VOL+/- button enter the FUNCTION menu.
4.Press CH+/- button to select D FILTER.
5.Press VOL+/- button to select the COLOR TEMP,
use CH+/- button to adjust.
AAA SETTING
AAA function can improve the quality of picture and make the picture best.
1.Press MENU button to make the main menu display.
2.Press CH+/- button to select FUNCTION menu.
3.Press VOL+/- button enter the FUNCTION menu.
4.Press CH+/- button to select AAA.
5.Press VOL+/- button to select ON, OFF, DEMO or
SPLIT.
6.Press AAA button on the remote control to start
and select AAA mode.
DEMO: Use one moved sub picture in the picture to start AAA function.
SPLIT: Separate the picture from left and right, start
AAA function in left picture.
Note: It can not use the DEMO, SPLIT function with
no signal and in PIP mode.
17
OTHER SETTING FUNCTION
- HDMI . The HDMI logo and High-Definition Multimedia Interface is a trademark or registered trademark of HDMI Licensing.
-This TV can receive the High-Definition Multimedia Interface (HDMI).
-This TV supports HDCP (High-bandwidth Digital Contents Protection) Protocol for
720x480p, 1280x720p and 1920x1080i resolution.
-When you connect this TV with a source device (DVD player, Set Top Box or PC) supporting Auto HDMI function, the output resolution of the source device will be automatically set to 1280x720p.
-If the source device does not support Auto HDMI, you need to set the output resolution appropriately.
To get the best picture quality, adjust the DVD Player or Set Top Box’s output resolution to 1280x720p, and the PC graphics card’s output resolution to 1024x768, 60Hz.
-If the source device has an HDMI output, no other audio connection is necessary because HDMI-to-HDMI connecting includes both video and audio.
How To Connect
1. Connect the source device to HDMI port of this TV with an HDMI cable (not supplied with this product).
2. No separate audio connection is necessary.
How To Use
-If the source device supports Auto HDMI function, the output resolution of the source device will be automatically set to 1280x720p.
-If the source device does not support Auto HDMI, you need to set the output resolution appropriately.
To get the best picture quality, adjust the output resolution of the source device to
1280x720p.
-Select HDMI input source by using TV/AV button.
How To Set
The method to set is similar to TV.
18
EXTERNAL AUDIO AND VIDEO EQUIPMENT CONNECTION
You can connect outside signal source VCR VCD
DVD PC equipment to the TV set.
Antenna Input
1.Connect the VCR radio frequency input to
the back radio frequency input of the LCD.
2. Connect the antenna to VCR antenna input.
3. Press TV/AV button to select TV mode.
4. Press PLAY button in VCR to start watching.
AV input
1.Connect audio video output port in VCD to
AUDIO IN and VIDEO IN port in TV set.
2. Press TV/AV button to select composite
VIDEO mode.
3. Press PLAY button in VCD to start watching.
S-VIDEO input
If you use S terminal as signal input source, the image quality will be better than video(AV).
1.Connect S terminal output in DVD to S terminal
input in TV set.
2.Connect S terminal left/right audio output in DVD to
the relevant port in TV set.
3.Press TV/AV button repeatedly until the display
mode is S-VIDEO.
4.Press PLAY button in DVD to broadcast. At this time
the image programs in DVD will broadcast in TV set.
DTV input
1. Component terminal (Y/PbCb/PrCr) connect to the
component output of picture output device (such as
DVD, HDTV TUNER and so on ), the sound is input
from AUDIO IN:
2.Press TV/AV button to select HDTV mode.
3.Press PLAY button on the external device to start
watching.
HDMI input
1.Connect HDMI signal source output to the HDMI
input in this TV set.
2.Press TV/AV button to select HDMI mode.
3.Press PLAY button on the external device to start
watching.
19
A U D IO IN
VCD
S -V ID E O
IN
VIDEO IN
L R
AU D I O I N
ANT.
VCR
DVD
AUD I O I N
Y C b/Pb C r / P r
DVD
HDMI
DVD
S- V I D E O
IN
VIDEO IN
USING YOUR TV AS A COMPUTER DISPLAY
VGA input
1. Connect the VGA output port in the computer to the VGA port in the TV set.
2. Connect the audio cable in computer to VGA AUDIO IN port in TV set.
3. Press TV/AV button to select VGA mode.
4. Turning on the computer, the screen image of the computer will display on the
TV set.
At this time, the TV set can be used as a computer display.
VGA-A UDIO IN
VGA
RESOLUTION:
Mode
VGA
Resolution
640
x
480
Horizontal
Frequency
31.5kHz
SVGA 800
x
600
37.9kHz
XGA
1024
x
768
48.4kHz
Note: The above parameters are VESA standard.
Vertical
Frequency
60Hz
60Hz
60Hz
Note:
1. If the temperature of the TV set is rather low, it is normal that there may be some
artifacts when the set is first turned on.
2. Nonconforming pixels may occur on the panel, but they have no influence on the
normal function of the display.
3. In the standard operation, It is normal if there is one bright dot or dark dot on the
screen.
20
SPECIFICATIONS
The part specifications of this TV set provided here are for reference only.
Difference may occur as product technology is updated.
Model
Screen
TV/VIDEO
Type
Viewable angle
Color system
Sound system
Video input
DTV Y/Pb/Pr
Power
Power consumption
Dimension (W
×
D
×
H)(cm)
Environment conditions
Accessory
L32A9A-A
A-si TFT active matrix
176
°
(H)/176
°
(V)
PAL, SECAM, NTSC (AV)
BG, DK
CVBS, S-VHS, YPb/Pr, YCb/Cr, VGA,HDMI
Composite: 480i/p, 576i, 720p,1080i,1080p
See rating plate
See rating plate
81.3
×
24.6
×
62.1 (included base
)
Working temperature:
+
5
℃~+35℃
Working humidity:
20%-80%
Storage temperature:
-
15
℃~+45℃
Storage humidity:
5%-90%
User’s manual (
×
1)
Remote control (
×
1)
Power cord (
×
1)
Battery (
×
2)
The design and specifications are subject to change without notice.
21
TROUBLE SHOOTING GUIDE
The following problems are not always caused by hardware failure, please use the
follow trouble shooting guide before you call for service:
BREAKDOWN PHENOMENON
PICTURE SOUND
CHECK FOR
The direction and connection of the antenna
Noise
Picture with Snow
Double or Triple Image
Disturb
Normal
Noise
Direction, station and connection of the antenna
Interference from electric appliance. Automobile
、
Motor,
Vehicle Fluorescence lamp etc.
Normal
No Picture
No Sound
No Sound
Volume, Sound mute
The power plug isn't plugged in AC outlet. The main power isn't turned on. The setting up of contrast, brightness and volume.
Adjust color control
Normal Volume
No Color
Adjust channel again
Scramble Normal or Weak Volume
Note:1.If the problem can not be fixed after you check above items. DO NOT attempt
to remove the back cover by yourself.
2.A snapping sound from the cabinet of the TV set can be heard occasionally.
This is normal and is caused by temperature changes of the operating environment
and does not affect the operation of the set.
3.Do not let the TV set stay on a static images, as this can lead to permanent
residual images. If this situation occurs, the TV set may recover normal
automatically after 12 hours if you switch the TV set to dynamic programming.
22
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
Frequently Answers and Questions
How do I turn on the TV using the remote control?
How do I change the TV source using the TV remote?
How do I switch between the main and sub picture in PIP mode using the remote control?
What is the purpose of the display button on the remote control?
What does the AAA function do?
advertisement
Table of contents
- - Warning and caution
- - Buttons and interface position
- - Front control panel
- - Back interface
- - Wall mount switching support assembly instructions
- 1 Preparation for remote control
- 2 Remote control panel
- 3 Basic operation
- 3 Power on/off TV
- 3 TV program selection and volume adjustment
- 3 Recall
- 3 Mute function
- 3 OSD language selection
- 4 Screen display
- 5 TV program setting
- 5 Auto search
- 5 Manual search
- 6 Fine tune
- 6 Skip
- 7 Exchange
- 7 Image control
- 7 Set your favourite picture mode
- 7 Noise reduce
- 8 Picture mode /sound mode selection
- 8 Sound control
- 8 Sound effect control
- 8 System setting function
- 8 OSD background setting
- 9 Signal source setting
- 9 Screen display picture zoom setting
- 9 Other setting function
- 9 Sleep timer setting
- 10 PIP setting
- 10 Sound source setting
- 11 Color temperature
- 11 Digital filter setting
- 11 AAA setting
- 12 HDMI
- 11 External audio and video equipment connection
- 11 Using your TV as a computer display
- 12 Specifications
- 12 Trouble shooting guide