advertisement
SuperLine IAD
Model 6510
Quick Installation
Document Number 6510-A2-GZ40-00
September 1999
Quick Installation
Go to the room where you want your high-speed data connection. Plug the phone cable that came with the SuperLine IAD into the wall jack. Plug the other end of the phone cable into the LINE jack on the back of the
SuperLine IAD.
Plug your Ethernet cable into the ETHERNET jack. Plug the other end of the cable into the network interface card in your PC, or into your Ethernet hub.
Use an Ethernet crossover cable to connect a PC, or a straight-through
Ethernet cable to connect a hub.
Pop open the ferrite choke using a fingernail or a coin.
Close it around the power cable near the round plug. Slide the ferrite choke as close to the plug as it will go. Installlation of this choke is essential to maintain compliance with Part 15, FCC Rules.
Plug the power transformer into an ac outlet and the POWER jack.
See the SuperLine IAD Installation Instructions for more information.
Phone Filters
Connect a phone filter to all the phones and other devices (such as fax machines, answering machines, alarm systems, or modems) that are attached to the same line as the SuperLine IAD. (Do not connect a filter to any device you plug into the SuperLine IAD.)
*6510–A2–GZ40–00*
Copyright 1999 Paradyne Corporation
SuperLine IAD
PC or
Hub
PHONE
TM
Phone Filter
1198
Made in China / F
TUY
PR
VICE ufte
Y
EQ
UIPMENT
ACCESSAR
L.T
E100296
LR92997
LINE
99-16410
99-16485
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project