Quick Start Guide

This quick start guide contains important information on the safe operation of the product. Read and follow the safety advice and instructions given. Retain the quick start guide for future reference. If you pass the product on to others please include this quick start guide.

EN

SDI-HDMI 3G Converter Full-HD

Safety instructions

Intended use

This device is used to convert SDI signals to HDMI format. Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.

Danger for children

Ensure that plastic bags, packaging, etc. are disposed of properly and are not within reach of babies and young children. Choking hazard! Ensure that children do not detach any small parts from the product. They could swallow the pieces and choke! and choke! Never let children unattended use electrical devices.

Where to use the product

Never use the product

• in conditions of extreme temperature or humidity

• in extremely dusty or dirty areas

• in locations where the unit can become wet

• in locations with high levels of electrostatic or magnetic radiation

General handling

• To prevent damage, never use force when handling the product.

• Never immerse the product in water. Just wipe it with a clean dry cloth. Do not use liquid cleaners such as benzene, thinners or flammable cleaning agents.

Features

• Compact converter from SDI to HDMI signals up to 1080p | 60

• 3G-SDI connections

• Detects SD and HD formats automatically

• Input connectors: SDI

• Output connectors: HDMI

• Delivery including international power supply (5 V )

• Supported input resolutions: 525i, 625i, 720p @ 24 Hz, 720p @ 25 Hz, 720p @, 30 Hz,

720p @ 50 Hz, 720p @ 60 Hz, 1080i @ 50 Hz, 1080i @ 60Hz, 1080p @ 24 Hz,

1080p @ 25 Hz, 1080p @ 30 Hz, 1080p @ 50 Hz, 1080p @ 60 Hz

• Dimensions (W × H × D): 121 mm × 66 mm × 26 mm

• Weight: 0.25 kg

• Temperature range: 0 °C 40 °C, relative humidity 50 %, non-condensing

Operating elements

q Connection for power supply w Operating indicator lights up red when voltage is present e HDMI OUT – HDMI output r SDI IN – SDI input t SDI OUT – SDI loop output

ö # $

% &

Using the product

1. Connect the SDI output of the desired device to the SDI IN socket using a suitable SDI cable.

2. Connect the input of a suitable HDMI device to the HDMI Out output.

3. Connect the device to a properly wired wall socket using the power supply supplied. The device is immediately ready for use.

4. If the resolution of the input signal matches one of the resolutions supported by the HDMI device connected to the output, the signal is output via the HDMI output. To monitor the SDI input, you can connect the input of an SDI device to the SDI Out output. The HDMI output does not transmit audio signals.

5. When you have finished using the device, disconnect the power supply from the wall socket.

For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.

This product is subject to the European Waste Electrical and Electronic Equipment Directive (WEEE) in its currently valid version. Do not dispose of your old device with your normal household waste. Dispose of this product through an approved waste disposal firm or through your local waste facility. Comply with the rules and regulations that apply in your country. If in doubt, consult your local waste disposal facility.

Thomann GmbH • Hans-Thomann-Straße 1 • 96138 Burgebrach • www.thomann.de • [email protected] DocID: 497002_15.02.2021

SDI-HDMI 3G Converter Full-HD

Technical specifications

Resolutions

Format change

Format

HDCP

Colour depth

Audio formats

Audio inputs

Audio outputs

Input connections

Output connections

Signal looping

Power supply

Operating voltage

Degree of protection

Dimensions (W × H × D)

Weight

Ambient conditions input output up to 1080p60 up to 1080p60 yes

HDMI 1.4

HDCP 1.4, SDI loop

./.

./.

12 bit

DTS HD / Dolby TrueHD / LPCM7.1 / DTS / Dolby-AC3 / DSD

1 × SDI

1 × HDMI

1 × SDI loop output

1 × SDI

External power adapter, 100 - 240 V~ 50/60 Hz

5 V  / 1000 mA, centre positive

IP20

121 mm × 66 mm × 26 mm

0.25 kg

Temperature range

Relative humidity

0 °C…40 °C

50 %, non-condensing

EN

Thomann GmbH • Hans-Thomann-Straße 1 • 96138 Burgebrach • www.thomann.de • [email protected] DocID: 497002_15.02.2021