Haier DTA-1481, TDC1314S Caracteristiques Techniques

Add to My manuals
31 Pages

advertisement

Haier DTA-1481, TDC1314S Caracteristiques Techniques | Manualzz

Convenient picture and so und control functions

Multiple picture modes

How to select picture modes

P.STD

You can quickly select the desired picture mode from four preset modes and one customized mode.

Press the P.STD button to select the desired

STANDARD picture quality. Five kinds of picture modes

RICH

USER

MENU

P+

"SOFT" ) can be selected in turn.

LISTEN

The 5 modes are

Listen-This is a new feature that blacks out SOFT

the TV screen when listening to music only channels;

Soft-Designed for night time low light viewing;

Standard -Designed for rooms that have good all round

lighting;

Rich-Designed for rooms with high ambient lighting such

as daytime sport;

User-A spare setting that can be adjusted to personal

tastes.

How to customize your own picture status

1 Press the

MENU button. The

MAIN MENU

will appear with the PIC (picture) icon flashing.Press P to enter the PICTURE menu.

P-

85

CONTRAST

BRIGHTNESS

COLOR

SHARPNESS

2 Press the P+/- buttons to select the item to adjusted, then press the VOL-/+ buttons to obtain the desired effect.

I T E M

CONTRAST

BRIGHTNESS

COLOUR

SHARPNESS

*Hue

Press VOL-

Weak

Dark

Shallow

Soft lean to purple

Press VOL+

Strong

Bright

Deep

Sharp lean to green

Note:The "Hue" item only appears when the colour system is NTSC.

Time functions

Clock setting and timer on/off functions

Clock setting

TIME

The clock will only work if the TV set if left turned on or in standby. When the set is disconnected from the power supply or is turned off by the main power on the front panel, the clock loses power and will need to be reset when the power is reconnected.

TIME

1 Press the TIME button, and the

TIME menu appears on the screen.

2 Press the P+/- buttons select

"CLOCK", then press the V -/+ buttons to adjust the time in hour position; press again the

P+/- buttons to select the time in minute position, then press the VOL-/ +buttons to adjust the value of minutes .

TIME

CLOCK 17:18

ON TIME 18:00

ON PROG 1

OFF TIME --:--

SLEEP TIMER 0

REMIND TIME --:--

REMIND PROG 1

On/off timer

On-off time setting is cleared after timer operates.

Using on/off timer function, the TV set can automatically turn on to a preset program or shut down at a preset time.

1 Press the TIME button, and the TIME menu display on the screen.

TIME

CLOCK 17:18

ON TIME 18:00

ON PROG 1

OFF TIME --:--

SLEEP TIMER 0

REMIND TIME --:--

REMIND PROG 1

2 Press the P+/- buttons to select "ON TIME", then press the VOL-/+ buttons to set the value in hour position; press again theP+/- buttons to select the minute position and set the value of the minute(take 18:00 as an example).

3 Press the P+/- buttons to select "ON PROG", then press the VOL-/+ or program number buttons to select your desired channel (take 8 as an example).

TIME

CLOCK 17:18

ON TIME 18:00

ON PROG 8

OFF TIME 23:00

SLEEP TIMER 0

REMIND TIME --:--

REMIND PROG 1

4 Repeat step 1-2 to set OFF

TIME(take 23:00 as an example).

Set up function

Continued

AVL

MENU

P+

AVL function

Automatic Volume Level control reduces the effect of large volume changes. For instance, when advertisements come on.

1 Press the

MENU button.

The MAIN MENU will appear with the PIC

(picture) icon flashing.

Press the

MENU

button a further 2 times until the

FUN (function) icon is flashing.Press P to enter the

FUNCTION

menu.

BACKGROUND

BLACK STRETCH

NOISE REDUCE

FADE

AVL

P-

2 Press the P+/ button to select

"AVL" .

BACKGROUND

BLACK STRETCH

NOISE REDUCE

FADE

AVL

3 Press VOL-/+ button to turn the

DVD System Setup

DVD System Setup

SETUP

General Setup Process

1.Press the SETUP button, the

General Setup Page,Preference

Page will be displayed in turn.

2.Press CH+/- b to select the submenu.

or item,then press to enter the or press PLAY/ENTER to confirm.

4.Press SETUP button to exit the menu.

..General Setup Page..

TV Display LB 4 3:Ps

Angle Mark On

OSD Lang ENG

Spdif Output

Caption On

Screen Saver Off

..Preference Page..

TV Type Auto

Parental

Password

Default

PAL

AUTO

NTSC

SETUP

General Setup Page

ASPECT RATIO DESCRIPTION

When using the DVD with the internal TV, select 4 3/LB.

The following information applies only when the DVD output is connected to an external TV.

..General Setup Page..

TV Display LB 4 3:Ps

Angle Mark On

OSD Lang ENG

Spdif Output

4 3/PS (PS = Pan and Scan)

You may select if you have a normal aspect ratio (4:3) TV, although the NORMAL/LB

(letter box) is a more common choice. In PS

Caption On

Screen Saver Off mode, widescreen material will fill the screen, but at the expense of chopping off extreme left and right edges of the original film picture. For this feature to work, the disc must be specially coded. Such discs are uncommon.

4 3/LB (LB = Letter Box)

You may select this if you have a normal aspect ratio (4:3) TV. Widescreen material will be shown in pure unaltered form, allowing the entire picture area of the original film to be viewed without any side cropping. Black bars will appear above and below the picture.

16 9

You may select this if you have a widescreen (16:9) TV. Back bars may still appear above and below the picture even if using a widescreen TV. This is because some film directors prefer to use ultra widescreen aspect ratios e.g.

2.35:1. This will normally be indicated on the DVD packaging.

DVD System Setup(Continued)

DVD System Setup

SETUP DEFAULT: Resets all settings

(except password and parental lock status) for this DVD player back to the manufacturers original settings. Press ENTER to perform the reset.

..Preference Page..

TV Type Auto

Parental

Password

Default Reset

Note:

Some functions may not be available depending on the type of disc.

CONWA

WHERE EXP ECTATION MEETS REALITY

01

0090505433

Caractéristiques techniques

Caractéristiques techniques

M o d è l e

Système de couleurs

TVD14MS

Lecture PAL SECAM NTSC

Système sonore

BG L/L'

Tube cathodique Tube cathodique couleur 14” (dimension visible de 33,5 cm)

Puissance sortie sonore

Système requis

Consommation

électrique

Dimensions

2X2W 10% THD

AC 230V 50Hz

75W

368 Width x 378 Depth x 371 Height mm

Accessoires

Télécommande

Manuel d'utilisation

Câble AV

Antenne

X1

X1

X1

X1

Ce lecteur DVD est conçu et fabriqué conformément à la réglementation relative aux codes région enregistrés sur les disques DVD. Si le code région indiqué sur le disque

DVD ne correspond pas au code région de ce lecteur DVD, le lecteur ne pourra pas lire le disque.

Le code régional de cet appareil est le 2.

2

FR31

advertisement

Related manuals

Frequently Answers and Questions

What are the five picture modes available on the Haier TVD14MS?
The five picture modes are STANDARD, RICH, USER, LISTEN, and SOFT.
How can I adjust the picture settings on the Haier TVD14MS?
Press the MENU button, select the PICTURE menu, use the P+/- buttons to select the desired setting, and use the VOL-/+ buttons to adjust the value.
What is the AVL function on the Haier TVD14MS?
The AVL (Automatic Volume Level) function helps reduce the effect of large volume changes, such as when advertisements come on.
How can I set the on/off timer on the Haier TVD14MS?
Press the TIME button, select ON TIME and set the desired time and channel, then select OFF TIME and set the desired time.
What is the screen size of the Haier TVD14MS?
The screen size is 14 inches (33.5 cm visible).
What is the power consumption of the Haier TVD14MS?
The power consumption is 75W.
What accessories come with the Haier TVD14MS?
The accessories included are a remote control, user manual, AV cable, and antenna.

advertisement