CURT 56196 2-to-3-Wire Taillight Converter Installation Guide

56196

2-WIRE TO 3-WIRE

TAILLIGHT CONVERTER convertidor.

convertisseur,

3/15/2010

1. Use the double-sided tape on the converter to secure it at the rear of the

TOWING vehicle.

2. Connect Yellow Wire (Input) to TOWING vehicle’s Left Turn/Brake Wire.

3. Connect Green Wire (Input) to TOWING vehicle’s Right Turn/Brake Wire.

4. Connect Yellow Wire (Output) to TOWED vehicle’s Left Turn Wire.

5. Connect Green Wire (Output) to TOWED vehicle’s Right Turn Wire.

6. Connect Red Wire (Output) to TOWED vehicle’s Brake Wire.

7. Connect White Wire (Ground) to the chassis of the TOWING vehicle. (TOWED vehicle connection must include ground.)

INPUT FROM TOWING VEHICLE

RIGHT TURN & STOP (GREEN)

GROUND (WHITE)

LEFT TURN & STOP (YELLOW)

Manufacturing

OUTPUT TO TOWED VEHICLE

RIGHT TURN (GREEN)

STOP (RED)

LEFT TURN (YELLOW)