Schluter Systems EV/RO110TSLA Rondec Light Anthracite 7/16 in. x 1 in. Color-Coated Aluminum Tile Edging Trim 90-Degree Outside Corner Manual

WALL AND

COUNTERTOP PROFILES

I N N O V A T I V E S O L U T I O N S F O R C E R A M I C A N D S T O N E T I L E

F I N I S H I N G A N D E D G E P R O T E C T I O N

2.3 Schluter

®

2.10 Schluter

-JOLLY

®

-QUADEC

16.2 Schluter ®

-DESIGNBASE-SL

= H

11,5

2.5 Schluter

®

-RONDEC-DB

EV 90°


-DIADEC

45°


-QUADEC-FS

2.1 Schluter ®

-RONDEC


-FINEC

2

135°

2.2 Schluter ®

-DESIGNLINE


-DECO-DE

135°

= H

2.6 Schluter ®

-ECK-E

2.8 Schluter

®

-RONDEC-STEP

1.9 Schluter

®

-DECO-SG

2.7 Schluter ®

-ECK-K

2.9 Schluter ®

-RONDEC-CT

= H

= A


-INDEC

2.7 Schluter ®

-ECK-KI/-KHK

2.11 Schluter

®

-SCHIENE-STEP

WALL AND COUNTERTOP PROFILES

Ceramic and stone tiles are durable, hygienic, heat resistant, and easy to maintain, representing the ideal surface covering for walls and countertops. However, lack of trim pieces such as bullnose or quarter round in many tile lines can limit designers’ options.

Schluter

®

-Systems offers various finishing and edge-protection profiles for walls and countertops that offer increased design flexibility because they can be integrated with any field tile to create a beautiful, durable installation.

Application and Function

Wall Profiles

decorative effect, the profile protects tile edges against damage caused by mechanical stresses.

QUADEC, in stainless steel, is particularly resistant to wear when used as edge protection. It may also be used as a stair nosing or floor transition profile. In addition, QUADEC is suitable for transitions, corners, or dado coverings with other covering materials; for example, carpet, parquet, natural stone tiles, or poured epoxy coverings. The integrated joint spacer forms a defined joint cavity with the tile.

2.3 Schluter ® -JOLLY is a finishing and edgeprotection profile for the outside corners of tiled surfaces. It features a trapezoid-perforated anchoring leg that is secured in the mortar bond coat beneath the tile, and an 87° sloped vertical wall section that provides a decorative finish and protects adjacent tiles. The profile is available in chrome-plated solid brass, color-coated aluminum, textured color-coated aluminum, anodized aluminum, and PVC. Schluter ® -SCHIENE features the same design as JOLLY and is also available in solid brass, aluminum, and stainless steel. Please see the Schluter ® -Systems Illustrated Price List for more details. The range of available sizes and finishes permits the matching of JOLLY to a wide variety of tile and grout colors and allows many design opportunities through the use of contrasting colors. Other applications include transitions for dado coverings such as carpet, natural stone, or cold-cured resin coatings. The integrated joint spacer establishes a defined joint cavity between the tile and the profile.

2.10 Schluter ® -QUADEC is a finishing and edge-protection profile for the outside corners of tiled surfaces. It features a trapezoid-perforated anchoring leg that is secured in the mortar bond coat beneath the tile and a reveal that forms a square outer corner along the surface edge.

The profile is available in stainless steel, stainless steel with structured finish, anodized aluminum, color-coated aluminum, textured color-coated aluminum, and PVC. QUADEC allows for modern decorative design and interesting contrasts. The profile can be combined with the QUADEC-FS feature strip profile and the DESIGNLINE border profile for further design options. In addition to its

Schluter ® -QUADEC-K is a variant of the profile without an anchoring leg. It features an open cavity that is filled with thin-set mortar to secure the profile in the assembly. Alternatively, the profile may be installed with an adhesive such as

Schluter ® -KERDI-FIX. QUADEC-K is installed in wall applications (e.g., wainscotings and bases) with coverings up to 1/2" (12.5 mm) thick. The profile is particularly suited for finishing edges in retrofit applications, such as thin porcelain panel installation over existing wall tiles. QUADEC-K is available in anodized aluminum.

Note: QUADEC in stainless steel does not feature the integrated joint spacer. Matching inside/outside corners and connectors are available.

2.1 Schluter

(6 mm)

® -RONDEC is a finishing and edge-protection profile for the outside corners of tiled surfaces. It features a trapezoid-perforated anchoring leg that is secured in the mortar bond coat beneath the tile and a reveal that forms a symmetrically rounded outer corner with 1/4"

radius along the surface edge. The profile is available in stainless steel, solid brass, chrome-plated solid brass, anodized aluminum, color-coated aluminum, textured color-coated aluminum and PVC. RONDEC’s wide range of materials, colors, and surface finishes allows for color coordination with tile and grout and the creation of interesting accents in decorative designs. In addition to its decorative effect, the profile protects tile edges against damage caused by mechanical stresses.

RONDEC, in stainless steel, is particularly resistant to wear when used as edge protection. It may also be used as a stair nosing or transition profile. In addition, RONDEC is suitable for transitions, corners, or dado coverings with other covering materials; for example, carpet, parquetry, natural stone tiles, or cold-cured resin coatings. The integrated joint spacer forms a defined joint cavity with the tile.

Note: RONDEC, in stainless steel and solid brass, do not feature the integrated joint spacer. Matching inside and outside corners, including sink corners, and connectors are available. Matching end caps are available for RONDEC in stainless steel.

2

135°

2.14 Schluter ® -DECO-DE is a stainless steel finishing and edge-protection profile for 135° outside corners for tiled surfaces. It features a trapezoid-perforated anchoring leg that is secured in the mortar bond coat beneath the tile and a reveal that forms a flat surface. The profile is available in stainless steel and brushed stainless steel. DECO-

DE allows for modern decorative design and interesting contrasts. In addition to its decorative effect, the profile protects tile edges against damage caused by mechanical stresses.

1.9 Schluter ® -DECO-SG is a decorative profile featuring a 1/2" (12.5 mm) or 9/16" (15 mm) -wide channel that creates a shadow gap between tile courses or other wall covering. The profile may also be used as a support channel for glass walls. The

1/2" (12.5 mm) wide channel accommodates glass walls up to a thickness of 3/8" (10 mm) , and the

9/16" (15 mm) wide channel accommodates glass walls up to a thickness of 1/2" (12.5 mm) . DECO-

SG is available in anodized aluminum and stainless steel, and features a trapezoid-perforated anchoring leg that is secured in the bond coat beneath the tile.

2.17 Schluter ® -FINEC is a finishing and edge protection profile for the outside corners of tile coverings or mosaics. It features a trapezoidperforated anchoring leg that is secured in the mortar bond coat beneath the tile and provides a slim, elegant corner. The profile is available in stainless steel, anodized aluminum, and textured color-coated aluminum. FINEC, in stainless steel, is particularly resistant to wear when used as edge protection. It may also be used as a stair nosing profile.

2.13 Schluter ® -DIADEC is an anodized aluminum finishing and edge-protection profile for tiled edges and outside corners of tiled surfaces. It features a trapezoid-perforated anchoring leg that is secured in the mortar bond coat beneath the tile and a reveal that forms a 45° beveled edge. DIADEC features integrated joint spacers that establish defined joint cavities between the tile and the profile.

45°

EV 90°


Schluter ® -DIADEC-K is a variant of the profile without an anchoring leg. It features an open cavity that is filled with thin-set mortar to secure the profile in the assembly. DIADEC-K is installed in wall applications (e.g., wainscotings and bases) with coverings at least 1/4" (6 mm) thick. The profile is particularly suited for finishing edges in retrofit applications, such as tile installation over existing wall tiles.

Note: The outside corner can be used with any size of the DIADEC profile.

washrooms, and food-processing plants) and where aesthetic appeal is desired. ECK-E/-K can be combined with the cove-shaped stainless steel profiles Schluter ® -DILEX-EHK (for inside wall corners and floor/wall transitions) and Schluter ®

(for floor/wall transitions).

-DILEX-HKS

(e.g., where the profile is not surrounded by field tile).

Note: Matching inside corners/outside corners/end caps are available.

ECK-KI ECK-KHK

2.12 Schluter ® -INDEC is an anodized aluminum finishing and edge-protection profile for outside corners of tiled surfaces. It features a trapezoidperforated anchoring leg that is secured in the mortar bond coat beneath the tile, and the visible surface forms a recessed decorative channel.

INDEC can be used as a transition or stop profile to a door or window frame. Matching outside corners are available.

2.7 Schluter ® -ECK-KI/-ECK-KHK are stainless steel profiles that are subsequently bonded to the inside corners of existing tile or other wall coverings to produce a clean, decorative finish. As such, the profiles can be installed as a repair so that existing damaged corners do not have to be replaced.

ECK-KHK provides a 5/16" (8 mm) radius to prevent the accumulation of dirt and make cleaning simple.

Thus, the profile is especially suited for commercial kitchens, bathrooms, food processing plants or any environment where a sanitary corner is desired.

Note: Matching inside and outside corners and connectors are available for ECK-KHK.

Border Profiles

2.2 Schluter ® -DESIGNLINE is a border profile for producing decorative designs in interior wall coverings. The profile is available in stainless steel, stainless steel with structured finish, chrome-plated solid brass, and anodized aluminum and is designed to coordinate with RONDEC and QUADEC profiles for outside wall corners. DESIGNLINE has a

1" (25 mm) -wide surface area and a thickness of

1/4" (6 mm) . It is anchored in the mortar bond coat between tile courses via its cross-sectional shape and can be used with thicker tiles by building up the setting material behind the profile.

Countertop Profiles

= H

16.2 Schluter ® -DESIGNBASE-SL is a finishing profile used as an alternative to baseboards. The profile is available in anodized aluminum, color coated aluminum and stainless steel. It features a

11.5 mm -

15/32" clean, finished look and is simply attached to the wall with a suitable adhesive. The profile can be equipped with an optional sealing lip to help protect the floor-to-wall transition from moisture and to reduce the transmission of impact sound. Note:

Inside and outside corners, connectors and end caps are available.

2.5 Schluter ® -RONDEC-DB , an anodized aluminum, decorative profile for wall and skirting edges, protects the surface covering from mechanical or impact stresses. The profile features a trapezoid-perforated anchoring leg that is secured in the mortar bond coat beneath the tile and a pronounced visible surface that establishes a clean line along tile edges and allows for decorative design.

RONDEC-DB can also be used as a finishing profile within wall surfaces; for example, where other covering materials such as plaster, wallpaper, or tiles are to be joined.

ECK-E

2.6/2.7 Schluter ®

ECK-K

-ECK-E/-K are stainless steel edging profiles for 90° or 135° outside corners of tiled walls that offer excellent edge protection against mechanical stresses; for example, in industrial kitchens and hospitals. In addition, the profiles produce a radiused edge along the outside wall corner for a clean, decorative finish. ECK-E features trapezoid-perforated anchoring legs that are secured in the mortar bond coat beneath the tile, while ECK-K is subsequently bonded to the outside corners of existing installations. As such,

ECK-K can be installed as a repair so that existing damaged corners do not have to be replaced.

ECK-E/-K are especially suitable for areas where strict hygienic requirements must be met (e.g., hospitals, industrial kitchens, clean rooms,

2.11 Schluter ® -QUADEC-FS is a double-rail feature strip profile for producing accents in tile fields on walls, chair rails, and various other decorative applications. The profile is available in anodized aluminum and features a 2" (51 mm) -wide recessed section with dovetailed grooves to which field or accent tile up to 5/16" (8 mm) -thick is bonded. The top and bottom edges of the profile are square and designed to integrate with the QUADEC profile.

QUADEC-FS is anchored in the mortar bond coat between tile courses via its cross-sectional shape and can be used with thicker tiles by building up the setting material behind the profile. The profile may also be attached to the substrate with fasteners

2.11 Schluter ® -SCHIENE-STEP is a finishing and edging profile for ceramic tile and natural stone installations on countertops, stairs, and tile over tile applications on walls. The profile features a trapezoid-perforated anchoring leg, which is secured in the mortar bond coat beneath the tile.

The top of the profile features a vertical wall section that finishes and protects the tile from damage, while the vertical leg covers the edge of the sub-assembly, top of the riser, or existing wall tile edge.

SCHIENE-STEP is available in anodized aluminum and brushed stainless steel versions, which have different shapes and intended uses. The stainless steel version is available in three vertical leg lengths:

1-1/2" (39 mm) for countertops, 1-3/16" (30 mm) for stairs, and 7/16" (11 mm) for tile over tile applications. Matching inside and outside corners and connectors are available, depending on the vertical leg length. The anodized aluminum version is intended for residential stair applications (stairs not exposed to heavy traffic). It is available in two vertical leg lengths, 1-3/16" (30 mm) and 1-1/2" (39 mm) , to cover the edge of the sub-assembly. The integrated joint spacer establishes a defined joint cavity between the tile and the profile. Accessories are not available for the anodized aluminum version.

2.8 Schluter ® -RONDEC-STEP is a finishing and edging profile for ceramic tile and dimension stone installations on countertops and stairs. The profile features a trapezoid-perforated anchoring leg, which

3

WALL AND COUNTERTOP PROFILES is secured in the mortar bond coat beneath the tile. The top of the profile features a symmetrically rounded edge with 1/4" (6 mm) radius, which matches the RONDEC profile, while the vertical leg of the profile hides the exposed edge of the sub-assembly. In addition, the profile effectively protects tiles in the edge area from mechanical and impact stresses. The integrated joint spacer establishes a defined joint cavity between the tile and the profile. RONDEC-STEP is suitable for residential applications, e.g., stairs not exposed to heavy traffic, and countertops. RONDEC-STEP is available in two different vertical leg lengths, 1-1/2"

(39 mm) and 2-1/4" (57 mm) , to cover the edge of the sub-assembly. The profile is available in anodized aluminum with various finishes to allow for decorative design and interesting accents. Matching corners for the RONDEC-STEP are available.

2.9 Schluter ® -RONDEC-CT is a double-rail edging profile for countertops to be fitted with a ceramic or dimension stone tile covering. The profile features a trapezoid- perforated anchoring leg that is secured in the mortar bond coat beneath the tile, while the face of the profile features a recessed section with dovetailed grooves to which field or accent tile is bonded. The top and bottom edges of the profile are symmetrically rounded (1/4" - 6 mm radius) and match the RONDEC profile. The 1-1/2" (39 mm) vertical leg of the profile hides the exposed edge of the sub-assembly. The integrated joint spacer establishes a defined joint cavity between the tile and the profile. The profile is available in anodized aluminum and textured color-coated aluminum with various surface finishes to allow for decorative design and interesting accents. Matching inside and outside corners are available.

Wall Access Panel System

11.1 Schluter

®

-REMA is the ideal system for creating concealed access panels in tiled wall coverings. The REMA assembly kit consists of four aluminum brackets with molded casings containing magnets that are clamped to lateral, movable guide shoes, and four ferro-magnetic metal counterplates. REMA’s installation is independent of tile size and thickness and enables exact matching of the access panel to the overall joint design. Thus, panels that access electrical or plumbing components do not impair the visual appearance of the tile covering.

Material Properties and

Areas of Application

Schluter ® wall and countertop profiles are resistant to most chemicals encountered in tiled environments.

In special cases, the suitability of a proposed type of material must be verified based on the anticipated chemical, mechanical, and/or other stresses. Exceptions and special considerations are listed below.

Stainless steel profiles are roll-formed, resulting in a slightly different contour from those made of extruded brass or aluminum. Stainless steel can sustain high mechanical stresses and is particularly well suited for applications requiring resistance against chemicals and acids; for example in the food industry, breweries, dairies, commercial kitchens, and hospitals, as well as in residential applications.

Typically, the profiles are formed using stainless steel 304 (1.4301 = V2A). For more severe chemical exposure, such as de-icing salts and chemicals used in swimming pools, we recommend the use of stainless steel 316 L (1.4404 = V4A), which offers even higher corrosion resistance than the

304. Even stainless steel cannot withstand all chemical exposures, such as hydrochloric acid, hydrofluoric acid or certain chlorine, chloride and brine concentrations. Both stainless steel 304 and stainless steel 316 L are approved for use in exterior applications. Stainless steel 304 is not as corrosion resistant as 316 L; however, profiles in stainless steel

304 are acceptable for exterior use as long as the intended area is not susceptible to de-icing salts, chlorine, or saltwater.

Solid brass sustains high levels of mechanical stress; for example, as edge protection for outside wall corners or edges of surface coverings.

Brass is resistant to most chemicals used in tiled environments. Solid brass that is exposed to air will oxidize, resulting in a natural patina. If exposed to moisture or aggressive substances, heavy oxidation and spotting may occur.

Chrome-plated brass is especially suited for wall corners and finishing applications. It is ideal for matching chrome fixtures. Surface areas must be protected against abrasion or scratching.

Aluminum profiles must be tested to verify their suitability if chemical stresses are anticipated.

Cementitious materials, in conjunction with moisture, become alkaline. Since aluminum is sensitive to alkaline substances, exposure to the alkali (depending on the concentration and duration of exposure) may result in corrosion (aluminum hydroxide formation). Therefore, it is important to remove mortar or grout residue from visible surfaces. In addition, ensure that the profile is solidly embedded in the setting material and that all cavities are filled to prevent the collection of alkaline water.

Anodized aluminum profiles feature an anodized layer that retains a uniform appearance during normal use, but is not color-stable in exterior applications. The surface is susceptible to scratching and wear and may be damaged by grout or setting material. Therefore, these materials must be removed immediately. Otherwise, the description regarding aluminum applies.

Color-coated aluminum and textured colorcoated aluminum are pretreated (chromated) aluminum that is color-coated with a polyurethane powder coat. The coating is color-stable,

UV-resistant, and suitable for exterior use. Protect the profile against abrasion or scratching.

PVC profiles are made of pre-colored, rigid PVC that resists bending or scratching. The material is UV-resistant, though not permanently colorstable, in exterior applications. PVC profiles are not suited for corners or transitions subjected to heavy mechanical stresses (e.g., at step edges or floor transitions).

Cutting Profiles

Observe all safety instructions and standards as directed by the cutting tool manufacturer, including protective eyewear, hearing protection, and gloves.

Always measure carefully and dry fit the profiles, corners, and connectors to ensure proper fit and alignment prior to setting tile.

Plastic profiles may be cut using Schluter ® -SNIPS or similar. It is important to make sure the blade is sharp to ensure a clean cut.

Aluminum profiles may be cut using any of the following options:

• Hacksaw with a bimetal blade and the highest teeth per inch (TPI) available.

• Variable-Speed Angle Grinder set to the lowest speed using the Schluter ® -PROCUT-TSM cutting wheel.

• Chop saw or Miter Saw with a non-ferrous blade.

Regardless of the cutting tool used, remove any burrs from the cut end of the profile with a file or similar before installation.

Stainless steel profiles may be cut using any of the following options:

• Variable-Speed Angle Grinder set to the lowest speed using the Schluter ® -PROCUT-TSM cutting wheel.

• Band Saw with a metal cutting blade.

Regardless of the cutting tool used, remove any burrs from the cut end of the profile with a file or similar before installation.

Installation

JOLLY, QUADEC, RONDEC, DECO-DE,

DIADEC, FINEC, INDEC, DECO-SG,

ECK-E, RONDEC-DB, SCHIENE-STEP,

RONDEC-STEP, and RONDEC-CT

1. Select the profile according to the tile thickness and format. Note: RONDEC-

DB can be used with tiles 1/4" - 1/2"

(6 - 12.5 mm) .

2. Using a notched trowel, apply thin-set mortar to the area where the profile is to be placed.

If JOLLY, QUADEC, RONDEC, RONDEC-DB,

DECO-DE, FINEC, or DIADEC is to be used as edging for an outside wall corner, finish tiling one wall first; then trowel thin-set mortar over the corner area of the second wall.

3. Press the perforated anchoring leg of profile into the mortar and align.

4


4. Trowel additional thin-set mortar over the perforated anchoring leg to ensure full coverage and support of the tile edges.

5. Solidly embed the tiles so that the tiled surface is flush with the top of the profile; the profile should not be higher than the tiled surface, but rather up to approx. 1/32" (1 mm) lower.

5a. If the FINEC profiles, in aluminum, are used to create a 3 way external corner, into which the two upper profiles were fitted at an angle of 45°, cut the adjoining lower profile to size. The trapezoid-perforated anchoring leg, including the joint spacer, must be cut off straight to the visible area by a minimum dimension x, depending on the profile length; see the AE illustration below.

5b. If the FINEC profiles, in stainless steel, are used to create a 3 way external corner, into which the two upper profiles were fitted at an angle of 45°, cut the adjoining lower profile to size. In this case, the trapezoidperforated anchoring leg must be cut off by a minimum dimension x, depending on the profile length, including the visible area has to be chamfered at a 45° angle; see the E illustration below.

(stainless steel version, depending on vertical leg length), RONDEC-STEP, and RONDEC-CT.

Connectors are available for QUADEC, RONDEC , and SCHIENE-STEP (stainless steel version).

Corners and end caps are held in place with thin-set mortar. Fill the ends of the profile with thin-set mortar prior to inserting the accessories. Connectors are held in place with a friction fit. Insert the connector into the profile approximately half the length of the connector piece and connect the adjacent profile.

For installation of SCHIENE-STEP corners and connectors: Install using KERDI-FIX, silicone, or similar adhesive. Prior to application, any contactinhibiting substances (e.g., grease, etc.) must be removed. The accessories should overlap the profiles by at least 3/8” (10 mm) . The accessories must be slid on the profiles during profiles installation

(cannot be placed over the profiles after installation).

For installation of RONDEC sink corners

(1-1/2" radius):

Insert the sink corner connectors into the profiles. Apply thin-set mortar to the substrate and firmly embed the profiles into the mortar.

2. Using a margin trowel, fill the back of the sink corners with thin-set mortar. Install the corners over the connectors and align. Setting materials must be removed immediately.

3. Aluminum accessories must be slid on the profiles during installation. Stainless steel accessories must be applied on top after the profile is installed. Install corners, connectors, and end caps using a permanently elastic, waterproof adhesive (e.g. KERDI-FIX or silicone). Prior to application, any contactinhibiting substances (e.g. grease, etc.) must be removed.

4. Use a suitable cleaning agent to remove any excess adhesive from around the profile.

Remove the protective foil.

Note: The optional sealing lip is inserted into the profile prior to installation. The lip must be pressed firmly into the profile (from the front for the aluminum version and from the rear for the stainless steel version) so that the front edge of the sealing lip is flush with the profile.

ECK-K/-KHK/-KI

1. ECK-K/-KHK/-KI are applied to prepared wall corners using KERDI-FIX, silicone, or a similar adhesive. Prior to applying the adhesive, make sure that all surfaces are free from adhesioninhibiting substances such as oil or grease.

Apply a bead of adhesive to the back of each of the profile legs; then press the legs onto the wall covering, ensuring that the lateral edges lie flat and have solid contact throughout.

2. Use a suitable cleaning agent to remove any excess adhesive from around the profile legs.

3. Remove the protective foil.

Install ECK-KHK inside and outside corners using a permanently elastic, waterproof adhesive (e.g.,

KERDI-FIX or silicone). Prior to application, any contact-inhibiting substances (e.g., grease, etc.) must be removed. The connectors should overlap the profiles by at least 3/8" (10 mm) .

QUADEC-K/DIADEC-K

5

=X

E

45°

=X

AE

Note: With FINEC, chamfer tiles adjacent to the profile by 45°. RONDEC-DB is intended to be higher than the tiled surface.

6. Set the tile to the integrated joint spacer, which ensures a uniform joint of 1/16" - 1/8"

(1.5 - 3 mm) . With the stainless steel profiles,

DECO-SG, FINEC, and RONDEC-DB, leave a space of approximately 1/16" - 1/8"

(1.5 - 3 mm) .

7. To set tile along the face of RONDEC-CT, apply thin-set mortar to the back of the tile using a margin trowel. Press the back-buttered tiles into the face of the profile, making sure to force thin-set mortar fully into the dovetailed grooves. The tiled surface should be flush with the outer edge of the profile; the profile should not be higher than the tiled surface, but rather up to approx. 1/32" (1 mm) lower.

Note: The recessed face accepts tile widths up to 1-1/8" (29 mm) .

8. Fill joints completely with grout or setting material. Note: Remove the protective foil from

ECK-E immediately after grouting.

9. Work with materials and tools that will not scratch or damage sensitive surfaces. Setting materials must be removed immediately, especially from aluminum.

Note: Matching corners are available for DIADEC,

QUADEC, RONDEC, INDEC, SCHIENE-STEP

1. QUADEC-K may be used to cover assembly edges up to 1/2" (12.5 mm) thick. DIADEC-K may be used to cover assembly edges at least

1/4" (6 mm) thick.

2. Fill the profile cavity with thin-set mortar.

3. Using a notched trowel, apply thin-set mortar to the area where the profile is to be placed.

4. Press the profile into the mortar and align.

Leave a space of approximately 1/16"-1/8"

(1.5 – 3 mm) material.

between the profile and tile.

5. Fill joints completely with grout or setting

6. Work with materials and tools that will not scratch or damage sensitive surfaces. Setting materials must be removed immediately.

Note: QUADEC-K may also be adhered using

KERDI-FIX. Matching inside/outside corners and connectors are available.

Corners/end caps are held in place with thin-set mortar. Fill the ends of the profile with thin-set mortar prior to inserting the accessories. Connectors are held in place with a friction fit. Insert the connector into the profile approximately half the length of the connector piece and connect the adjacent profile.

DESIGNBASE-SL

1. DESIGNBASE-SL is applied to prepared walls using KERDI-FIX or other suitable adhesive.

Prior to applying the adhesive, make sure that all surfaces are free from adhesion-inhibiting substances such as oil or grease.

2. Apply beads of adhesive to the back of the profile and press the profile into the wall, ensuring solid contact throughout. In the case of the stainless steel version, apply adhesive above and below the foam spacer; see illustration on page 11.

QUADEC-FS

1. Set tiles up to the area where QUADEC-FS is to be installed as a feature strip.

2. Using a notched trowel, apply a sufficient amount of thin-set mortar to this area and/ or to the back of QUADEC-FS and press the profile into the mortar and align. Leave a space of approximately 1/16" – 1/8"

(1.5 – 3 mm) between the profile and the tile.

Note: QUADEC-FS may also be attached to the substrate with fasteners.

3. Set the adjacent row of tiles. Leave a space of approximately 1/16" – 1/8" (1.5 – 3 mm) between the profile and the tile.

4. To set tile along the face of QUADEC-FS, apply thin-set mortar to the back of the tile using a margin trowel. Press the back-buttered tiles into the face of the profile, making sure to force thin-set mortar fully into the dovetailed grooves.

The tiled surface should be flush with the outer edge of the profile. Note: The recessed face accepts tile widths up to 2" (51 mm) .

5. Fill joints completely with grout or setting material.

6. Work with materials and tools that will not scratch or damage sensitive surfaces. Setting materials must be removed immediately.


Note: Matching inside corners/outside corners/end caps are available.

Corners/end caps are held in place with thin-set mortar. Fill the ends of the profile with thin-set mortar prior to inserting the accessories.

DESIGNLINE

1. DESIGNLINE may be used with tiles that are

1/4" (6 mm) thick or greater.

2. Set tiles up to the area where DESIGNLINE is to be installed as a decorative strip. Apply a sufficient amount of thin-set mortar to this area and/or to the back of DESIGNLINE and press the profile into the mortar until its surface is flush with the tile.

3. Set the adjacent row of tiles.

4. Set the tile to the integrated joint spacer, which ensures a uniform joint of 1/16" - 1/8"

(1.5 - 3 mm) . With the stainless steel and solid brass profiles, leave a space of approximately

1/16" - 1/8" (1.5 - 3 mm) .

5. Fill joints completely with grout or setting material.

REMA

1. Adhere an aluminum bracket to the back of each perimeter tile with thin-set mortar so that the magnet extends beyond the tile’s edge.

2. Set tiles, with magnets attached, as perimeter limits, so that four magnets extend into the access opening.

3. To form the access panel cover, connect the corresponding number of panel cover tiles by attaching a tile to their backs with thin-set mortar.

4. Using KERDI-FIX, silicone, or a similar adhesive, adhere the counterplates to the back of the panel cover in alignment with the perimeter magnets.

5. After the adhesive has cured, install the cover and seal the surrounding joint with a colorcoordinated sealing compound. Note: If the access opening is substantially larger than

12" x 12" (30 x 30 cm) , it may be necessary to install two additional magnets.

Maintenance

Schluter ® wall and countertop profiles require no special maintenance or care and are resistant to mold and fungi. Clean profiles periodically using pH neutral cleaning agents.

Stainless steel surfaces exposed to the environment or aggressive substances should be cleaned periodically using a pH neutral cleaner. Regular cleaning maintains the neat appearance of stainless steel and reduces the risk of corrosion. All cleaning agents must be free of hydrochloric acid, hydrofluoric acid, and chlorides. Stainless steel surfaces develop a sheen when treated with a chrome-polishing agent.

Oxidation films on solid brass or aluminum may be removed with a common polishing agent, but the film will form again.

In the case of chrome-plated brass , anodized aluminum , color-coated aluminum , and textured color-coated aluminum do not use abrasive cleaning agents.

Product Item Numbers

2.3 Schluter ® -JOLLY

H = 1/8"- 3/16"

( 3 - 4.5 mm)

H = mm - in.

6 - 1/4

8 - 5/16

10 - 3/8

12.5 - 1/2

Chromeplated solid brass

(MC)

MC 60

MC 80

MC 100

MC 125

1/8" - 3 mm

H = 1/4" - 1/2"

( 6 - 12.5 mm)

H = mm - in.

R = Radius

Notes :

• Radius available for JOLLY in metal profiles only.

• JOLLY in polished aluminum and chrome-plated brass require a relatively large bending radius.

6 - 1/4

8 - 5/16

10 - 3/8

12.5 - 1/2

Satin copper anodized aluminum

(AK)

A 60 AK

A 80 AK

A 100 AK

A 125 AK

H = mm - in.

4.5 - 3/16

6 - 1/4

8 - 5/16

10 - 3/8

12.5 - 1/2

Brushed brass anodized aluminum

(AMGB)

-

A 60 AMGB

A 80 AMGB

A 100 AMGB

A 125 AMGB

6

Polished chrome anodized aluminum

(ACG)

A 60 ACG

A 80 ACG

A 100 ACG

A 125 ACG

Polished copper anodized aluminum

(AKG)

A 60 AKG

A 80 AKG

A 100 AKG

A 125 AKG

Item No.

Bright black anodized aluminum

(AGSG)

A 45 AGSG

A 60 AGSG

A 80 AGSG

A 100 AGSG

A 125 AGSG

Brushed chrome anodized aluminum

(ACGB)

A 60 ACGB

A 80 ACGB

A 100 ACGB

A 125 ACGB

Brushed copper anodized aluminum

(AKGB)

A 60 AKGB

A 80 AKGB

A 100 AKGB

A 125 AKGB

Item No.

Satin nickel anodized aluminum

(AT)

A 60 AT

A 80 AT

A 100 AT

A 125 AT

Item No.

Brushed antique bronze anodized aluminum

(ABGB)

A 60 ABGB

A 80 ABGB

A 100 ABGB

A 125 ABGB

Brushed graphite anodized aluminum

(AGRB)

-

A 60 AGRB

A 80 AGRB

A 100 AGRB

A 125 AGRB

Polished nickel anodized aluminum

(ATG)

A 60 ATG

A 80 ATG

A 100 ATG

A 125 ATG

Satin brass anodized aluminum

(AM)

A 60 AM

A 80 AM

A 100 AM

A 125 AM

Brushed nickel anodized aluminum

(ATGB)

A 60 ATGB

A 80 ATGB

A 100 ATGB

A 125 ATGB

Polished brass anodized aluminum

(AMG)

A 60 AMG

A 80 AMG

A 100 AMG

A 125 AMG

Note: Additional finishes are available for this product.

The design configuration of JOLLY is identical to that of

SCHIENE (see Floor Profiles). However, their materials and finishes do vary. SCHIENE, in all materials and finishes, is suitable for floor applications, as well as wall and countertop applications. JOLLY is suited primarily for walls and countertops. However, JOLLY in AM, AMGB, AK,

AKGB, AT, ATGB, ABGB and ACGB is also suitable for floors and may be used in such applications to increase design options.


2.3 Schluter ® -JOLLY

H = mm - in.

3 - 1/8

4.5 - 3/16

6 - 1/4

8 - 5/16

10 - 3/8

11 - 7/16

12.5 - 1/2

Color-coated aluminum

(AC)

A 30

A 45

A 60

A 80

A 100

A 110

A 125 color* color* color* color* color* color* color*

Item No.

PVC

Length supplied: 8' 2-1/2" — 2.5 m

(P)

color* 45 color* 60 color* 80 color* 100 color* 110 color* 125

*

Color Codes

BW

Bright white

W

White

SP

Sand pebble

BH

Bahama

HB

Light beige

HG

Light grey

PG

Classic grey

G

Grey

GM

Metallic grey

GS

Black

RB

Red brown

1 SB

Black brown

* To complete the item number, add the color code (e.g., G 45).

1 : RB (Red Brown) is only available in color-coated aluminum in sizes 80, 100, and 125.

Schluter

®

-TRENDLINE Textured Color-coated Aluminum

2.3 Schluter

®

-JOLLY

Item No.

H = mm - in.

Textured color-coated aluminum

(TS)

6 - 1/4

8 - 5/16

10 - 3/8

11 - 7/16

12.5 - 1/2

A 60

A 80

A 100

A 110

A 125 color* color* color* color* color*


*

Color Codes

TSR

Rustic brown

TSBG

Greige

TSDA

Dark anthracite

TSI

Ivory

TSLA

Light anthracite

TSB

Beige

TSSG

Stone grey

TSOB

Bronze

* To complete the item number, add the color code

(e.g., A 60 TSC ).

Matte White and Matte Black

2.3 Schluter

®

-JOLLY

Item No.

H = mm - in.


(TS)

3 - 1/8

4.5 - 3/16

6 - 1/4

8 - 5/16

10 - 3/8

11 - 7/16

12.5 - 1/2

A 30 + color*

A 45 + color*

A 60 + color*

A 80 + color*

A 100 + color*

A 110 + color*

A 125 + color*

*

Color Codes

MGS

Matte black

MBW

Matte white

* To complete the item number, add the color code (e.g., A 60 MGS ).

TSC

Cream

TSG

Pewter

2.3 Schluter

®

-JOLLY

H = mm - in.

8 - 5/16

10 - 3/8

12.5 - 1/2


(ACG)

A 80 ACG/300

A 100 ACG/300

A 125 ACG/300

Length = 3.05 m - 10'

Item No.


(AT)

A 80 AT/300

A 100 AT/300

A 125 AT/300


(ABGB)

A 80 ABGB/300

A 100 ABGB/300

A 125 ABGB/300

2.3 Schluter

®

-JOLLY

Length = 3.05 m - 10'

Item No.

H = mm - in.

Bright white

PVC

8 - 5/16

10 - 3/8

12.5 - 1/2

(BW)

BW 80/300

BW 100/300

BW 125/300

7


Stainless Steel

Stainless steel

= H

2.10 Schluter

®

-QUADEC

H = mm - in.

Stainless steel 304

(1.4301 = V2A)

4.5 - 3/16

6 - 1/4

7 - 9/32

8 - 5/16

9 - 11/32

10 - 3/8

11 - 7/16

12.5 - 1/2

14 - 17/32

15 - 9/16

(E)

Q 45 E

Q 60 E

Q 70 E

Q 80 E

Q 90 E

Q 100 E

Q 110 E

Q 125 E

Q 140 E

Q 150 E


Item No.

Brushed stainless steel 304

(1.4301 = V2A)

(EB)

-

Q 60 EB

Q 70 EB

Q 80 EB

Q 90 EB

Q 100 EB

Q 110 EB

Q 125 EB

Q 140 EB

Q 150 EB

Accessories

End cap, outside/inside corner

Stainless steel

304 (1.4301 = V2A) square check

(ES1)

-

-

Q 80 ES1

-

Q 100 ES1

Q 110 ES1

Q 125 ES1

-

-

Item No.

EV/ profile item number*

Stainless steel

304 (1.4301 = V2A) leather texture

(ES2)

-

-

Q 80 ES2

-

Q 100 ES2

Q 110 ES2

Q 125 ES2

-

-

H = mm - in.

6 - 1/4

8 - 5/16

10 - 3/8

11 - 7/16

12.5 - 1/2

Connector for stainless steel profiles

V/RO 60 E

V/RO 80 E

V/RO 100 E

V/RO 110 E

V/RO 125 E

Aluminum

Aluminum

= H

2.10 Schluter ® -QUADEC

H = mm - in.

Satin anodized aluminum

4.5 - 3/16

6 - 1/4

8 - 5/16

10 - 3/8

12.5 - 1/2

15 - 9/16

20 - 3/4

(AE)

Q 45 AE

Q 60 AE

Q 80 AE

Q 100 AE

Q 125 AE

Q 150 AE

Q 200 AE


Accessories



(ACG)

Q 45 ACG

Q 60 ACG

Q 80 ACG

-

-

Q 100 ACG

Q 125 ACG

Item No.


(AT)

Q 45 AT

Q 60 AT

Q 80 AT

-

-

Q 100 AT

Q 125 AT

Item No.


How to order corners:

* To complete the item number for corners, add the corresponding profile item number (e.g., EV/ Q 80 E ).


(ABGB)

-

Q 60 ABGB

Q 80 ABGB

-

-

Q 100 ABGB

Q 125 ABGB

Inside Corner

H = mm - in.

6 - 1/4

8 - 5/16

10 - 3/8

12.5 - 1/2

Outside Corner

Connector for aluminum profiles

V/Q 60

V/RO 80

V/RO 100

V/RO 125

Note: The same corner piece can be used to produce a 90° inside corner and a 90° outside corner. It can also be used as an end cap.


Length = 3.05 m - 10'

Item No.

H = mm - in.

8 - 5/16

10 - 3/8

12.5 - 1/2


(ACG)

Q 80 ACG/300

Q 100 ACG/300

Q 125 ACG/300

8


Aluminum

Aluminum

= H


Item No.

H = mm - in.


4.5 - 3/16

6 - 1/4

8 - 5/16

10 - 3/8

11 - 7/16

12.5 - 1/2

(TS)

Q 45

Q 60

Q 80

Q 100

Q 110

Q 125 color* color* color* color* color* color*


H = mm - in.

Connector for textured color-coated aluminum profiles

6 - 1/4 V/Q 60

8 - 5/16 V/RO 80

10 - 3/8 V/RO 100

11 - 7/16 V/RO 110

12.5 - 1/2 V/RO 125

*

Color Codes

TSR

Rustic brown

TSBG

Greige

TSDA

Dark anthracite

TSI

Ivory

TSLA

Light anthracite

TSB

Beige

TSSG

Stone grey

TSOB

Bronze

MGS

Matte black

MBW

Matte white


(e.g., Q 60 TSC ).

Accessories


Item No.


Note: The matte black (MGS) and matte white (MBW) accessory pieces can only be used as outside corners or end caps.

TSC

Cream

TSG

Pewter


Item No.

H = mm - in.


(AC)

4.5 - 3/16

6 - 1/4

8 - 5/16

10 - 3/8

11 - 7/16

12.5 - 1/2

Q 45 color*

Q 60 color*

Q 80 color*

Q 100 color*

Q 110 color*

Q 125 color*

*

Color Codes

BW

Bright white

QG

Quartz grey

W

White

VG

Traffic grey

SP

Sand pebble

SB

Black brown

* To complete the item number, add the color code (e.g., Q 45 G ).

PG

Classic grey

GS

Black

Accessories

End cap, outside corner, 90°

Item No.

ED/ profile item number*

PVC

PVC


Item No.

H = mm - in.

PVC

6 - 1/4

8 - 5/16

10 - 3/8

11 - 7/16

12.5 - 1/2

(P)

PQ 60 color*

PQ 80 color*

PQ 100 color*

PQ 110 color*

PQ 125 color*

*

Color Codes

BW

Bright white

HB

Light beige

GS

Black

W

White

HG

Light grey

SP

Sand pebble

PG

Classic grey

BH

Bahama

G

Grey

* To complete the item number, add the color code (e.g., PQ 80 PG ).

Accessories

End cap, outside corner, 90°

Item No.

E/ profile item number*

Aluminum

12.5 mm - 1/2"

2.10 Schluter ® -QUADEC-K

H = mm - in.

12.5 - 1/2


(AE)

Q 125 AE K


(ACG)

Q 125 ACG K

Item No.


(AT)

Q 125 AT K


Accessories


Connector

Item No.

EV/ Q 125 finish*

V/RO 125

9


(ABGB)

Q 125 ABGB K


* To complete the item number for corners, add the corresponding finish (e.g., EV/ Q 125 AE ).


45°

2 mm - 3/32"

135°

2 mm - 3/32"

135°

Stainless steel

3.5 mm - 1/8"

135°

Aluminum

2.17 Schluter ® -FINEC

H = mm - in.

Stainless steel 304

(1.4301 = V2A)

Item No.


(E) (AE)

3.5 mm - 1/8"

2.5 - 3/32

4.5

- 3/16

135°

7 - 9/32

9 - 11/32

11 - 7/16

12.5 - 1/2

F 45 E

-

F 70 E

F 90 E

F 110 E

F 125 E


F 25 AE

F 45 AE

F 70 AE

F 90 AE

F 110 AE

F 125 AE

Textured & matte color-coated aluminum

F 25 MBW

F 45 + color*

F 70 + color*

F 90 + color*

F 110 + color*

F 125 + color*

*

Color Codes

TSR

Rustic brown

TSC

Cream

TSDA

Dark anthracite

TSBG

Greige

TSLA

Light anthracite

TSI

Ivory

TSSG

Stone grey

TSB

Beige

TSOB

Bronze

TSG

Pewter

MGS

Matte black

MBW

Matte white

* To complete the item number, add the color code (e.g., F 70 TSC ).

Aluminum

Aluminum

45°

Aluminum

45°

EV 90°

2.12 Schluter

®

-INDEC

H = mm - in.


8 - 5/16

10 - 3/8

11 - 7/16

12.5 - 1/2

ED 90°

(AE)

IN 80 AE

IN 100 AE

IN 110 AE

IN 125 AE


Item No.


(ACG)

IN 80 ACG

IN 100 ACG

IN 110 ACG

IN 125 ACG

Accessories

Outside corner 90°

Item No.

ED / IN profile item number*


* To complete the item number for corners, add the corresponding profile item number (e.g., ED / IN 100

AE ).

2.13 Schluter ® -DIADEC

H = mm -

8 - 5/16

10 - 3/8

45° 11 - 7/16

12.5 - 1/2 in.


(AE)

DI 80 AE 18

DI 100 AE 18

DI 110 AE 18

DI 125 AE 18

Accessories

Outside corner, 90°

Item No.


(ACG)

DI 80 ACG 18

DI 100 ACG 18

DI 110 ACG 18

DI 125 ACG 18


(ACGB)

DI 80 ACGB 18

DI 100 ACGB 18

DI 110 ACGB 18

DI 125 ACGB 18

Item No.

EV/DI 518 finish*


* To complete the item number for corners, add the corresponding finish (e.g., EV/DI 518 AE 18 ).

2.13 Schluter ® -DIADEC-K

Item No.


(AE)


(ACG)

DI 518 AE DI 518 ACG



(ACGB)

DI 518 ACGB

Accessories


Item No.

EV/DI 518 finish*


* To complete the item number for corners, add the corresponding finish (e.g., EV/DI 518 AE 18 ).

10


Aluminum

Aluminum

= H

11.5 mm -

15/32"

16.2 Schluter

®

-DESIGNBASE-SL

Item No.

H = mm - in.


(AE)

60 - 2-3/8

80 - 3-1/8

DB SL 60 AE

DB SL 80 AE


Anodized aluminum with brushed stainless steel appearance

(AEEB)

DB SL 60 AEEB

DB SL 80 AEEB

Matte white color-coated aluminum

(MBW)

DB SL 60 MBW

DB SL 80 MBW

Accessories


Inside corner, 90°

End cap (left)

End cap (right)

Connector

Item No.

ED / profile item number*

ID / profile item number*

EL / profile item number*

ER / profile item number*

V / profile item number*

Schluter

®

-DESIGNBASE-SLZ

Accessories

Sealing lip


Item No.

DB ZS LL

Note: For reasons associated with production technology, inside corners ID / DB SL 60 AEEB and

ID / DB SL 80 AEEB are not brushed.


* To complete the item number for corners, add the corresponding profile item number (e.g., ED / DB SL 60 AE ).

Stainless Steel

16.2 Schluter ® -DESIGNBASE-SL-E

Item No.

H = mm - in.

Brushed stainless steel

(EB)

Stainless steel

= H

10.5 mm

- 13/32"

110 - 4-3/8

160 - 6-3/8

DB SL 110 EB

DB SL 160 EB


Accessories


Inside corner, 90°

End cap (left)

End cap (right)

Connector

Item No.

E90 / profile item number*

I90 / profile item number*

EL / profile item number*

ER / profile item number*

V / profile item number*

Schluter

®

-DESIGNBASE-SLZ-E

Accessories

Sealing lip


Item No.

DB ZS LL E

8.5 mm - 21/64"

= H

11.5 mm -

15/32"

= H

10.5 mm -

13/32"

11


Stainless Steel

Stainless steel

= H

2.1 Schluter ® -RONDEC

H = mm - in.

Stainless steel 316L

(1.4404 = V4A)

4.5 - 3/16

6 - 1/4

7 - 9/32

8 - 5/16

9 - 11/32

10 - 3/8

11 - 7/16

12.5 -

15 -

1/2

9/16

(E/V4A)

-

RO 60 E/V4A

-

RO 80 E/V4A

-

RO 100 E/V4A

-

RO 125 E/V4A

-


H = mm -

4.5 - 3/16

6 - 1/4

7 - 9/32

8 - 5/16

9 - 11/32

10 - 3/8

11 - 7/16

12.5 - 1/2

15 - 9/16

H = mm - in.

in.

8 - 5/16

10 - 3/8

12.5 - 1/2

Outside corner

Item No.

Stainless steel 304

(1.4301 = V2A)

(E)

RO 45 E

RO 60 E

RO 70 E

RO 80 E

RO 90 E

RO 100 E

RO 110 E

RO 125 E

RO 150 E


(1.4301 = V2A)

(EB)

-

RO 60 EB

RO 70 EB

RO 80 EB

RO 90 EB

RO 100 EB

RO 110 EB

RO 125 EB

RO 150 EB

Aluminum with stainless steel appearance

-

ED/RO 60 E

-

ED/RO 80 E

-

ED/RO 100 E

-

ED/RO 125 E

-

Outside corner 90˚, end cap

Stainless steel 304

(1.4301 = V2A)

(E)


(1.4301 = V2A)

(EB)

EV/RO 45 E

EV/RO 60 E

EV/RO 70 E

EV/RO 80 E

EV/RO 90 E

EV/RO 100 E

EV/RO 110 E

EV/RO 125 E

EV/RO 150 E

-

EV/RO 60 EB

EV/RO 70 EB

EV/RO 80 EB

EV/RO 90 EB

EV/RO 100 EB

EV/RO 110 EB

EV/RO 125 EB

EV/RO 150 EB

(E)

Sink corner with 3/8" (10 mm) radius

Stainless steel 304

(1.4301 = V2A)


(1.4301 = V2A)

(EB)

I2S/RO 80 E/V2A

I2S/RO 100 E/V2A

I2S/RO 125 E/V2A

I2S/RO 80 EB/V2A

I2S/RO 100 EB/V2A

I2S/RO 125 EB/V2A

H = mm - in.

8 - 5/16

10 - 3/8

12.5 - 1/2


H = mm - in.

6 - 1/4

8 - 5/16

10 - 3/8

11 - 7/16

12.5 - 1/2

Connector

H = mm - in.

Connector for stainess steel profiles

V/RO 60 E

V/RO 80 E

V/RO 100 E

V/RO 110 E

V/RO 125 E

Inside corner 90˚

Aluminum with stainess steel appearance

6 -

8 -

10 -

12.5 -

1/4

5/16

3/8

1/2

H = mm - in.

8 - 5/16

10 - 3/8

12.5 - 1/2

ID/RO 60 E

ID/RO 80 E

ID/RO 100 E

ID/RO 125 E

End cap

Brushed stainless steel 304 (1.4301 = V2A)

(EB)

EK/RO 80EB

EK/RO 100EB

EK/RO 125EB

Sink corner with 1-1/2" (38 mm) radius

Stainless steel 304

(1.4301 = V2A)

(E)

ISK/RO 80 E/38

ISK/RO 100 E/38

ISK/RO 125 E/38

End cap

Inside corner Sink corner with 1-1/2" (38 mm) radius

Aluminum

Aluminum

= H

2.1 Schluter

®

-RONDEC

H = mm - in.

6 - 1/4

8 - 5/16

10 - 3/8

12.5 - 1/2


(AE)

RO 60 AE

RO 80 AE

RO 100 AE

RO 125 AE


(ACG)

RO 60 ACG

RO 80 ACG

RO 100 ACG

RO 125 ACG

12


(ACGB)

RO 60 ACGB

RO 80 ACGB

RO 100 ACGB

RO 125 ACGB

Item No.


(AT)

RO 60 AT

RO 80 AT

RO 100 AT

RO 125 AT


(ATG)

RO 60 ATG

RO 80 ATG

RO 100 ATG

RO 125 ATG


(ATGB)

RO 60 ATGB

RO 80 ATGB

RO 100 ATGB

RO 125 ATGB

13


2.1 Schluter

®

-RONDEC

H = mm - in.

6 - 1/4

8 - 5/16

10 - 3/8

12.5 - 1/2


(AK)

RO 60 AK

RO 80 AK

RO 100 AK

RO 125 AK


(AKG)

RO 60 AKG

RO 80 AKG

RO 100 AKG

RO 125 AKG


(AKGB)

RO 60 AKGB

RO 80 AKGB

RO 100 AKGB

RO 125 AKGB

Item No.


(ABGB)

RO 60 ABGB

RO 80 ABGB

RO 100 ABGB

RO 125 ABGB

H = mm -

6 -

8 -

10 -

12.5 -

1/4

5/16

3/8

1/2

H = in.

mm - in.

6 - 1/4

8 - 5/16

10 - 3/8

12.5 - 1/2


(AMGB)

RO 60 AMGB

RO 80 AMGB

RO 100 AMGB

RO 125 AMGB

Connector for aluminum profiles

V/RO 60

V/RO 80

V/RO 100

V/RO 125

Graphite anodized aluminum

(AGR)

RO 60 AGR

RO 80 AGR

RO 100 AGR

RO 125 AGR

Item No.

Bright black anodized aluminum

(AGSG)

RO 60 AGSG

RO 80 AGSG

RO 100 AGSG

RO 125 AGSG

Connector

Accessories

Outside corner, end cap

Inside corner

Double-leg, outside corner

Double-leg, inside corner


Brushed black anodized aluminum

(AGSB)

RO 60 AGSB

RO 80 AGSB

RO 100 AGSB

RO 125 AGSB

Note: Connectors are made of PVC for aluminum profiles.

Item No.


IV/ profile item number*

E2L/ profile item number*

I2L/ profile item number*

I2S/ profile item number*

Outside Corner


* To complete the item number for corners, add the corresponding profile item number (e.g., EV/ RO 60 AM ).

(E2L)

Sink corner with

3/8" (10 mm) radius


(AM)

RO 60 AM

RO 80 AM

RO 100 AM

RO 125 AM

Inside Corner


(AMG)

RO 60 AMG

RO 80 AMG

RO 100 AMG

RO 125 AMG

Note: Sink corners with 3/8" (10 mm) radius are only available in AE, ACGB, AT, ATGB, AK, AKGB, ABGB,

AM, and AMGB for sizes 80, 100 and 125 only.

(I2L)

Note : Inside/outside double-leg corners (E2L and I2L) and sink corners with

3/8" (10 mm) radius are available in 80, 100 and 125 only. They are not available in textured color-coated aluminum finishes.

2.1 Schluter

®

-RONDEC

H = mm - in.

8 - 5/16

10 - 3/8

12.5 - 1/2


Length = 3.05 m - 10'

(AE)

RO 80 AE/300

RO 100 AE/300

RO 125 AE/300

Item No.


(ACG)

RO 80 ACG/300

RO 100 ACG/300

RO 125 ACG/300


(AT)

RO 80 AT/300

RO 100 AT/300

RO 125 AT/300


Brass

Brass

= H

2.1 Schluter

®

-RONDEC

Item No.

H = mm - in.

Chrome-plated solid brass

6 - 1/4

8 - 5/16

10 - 3/8

12.5 - 1/2

Outside Corner

(MC)

RO 60 MC

RO 80 MC

RO 100 MC

RO 125 MC

H = mm - in.

Polished chrome anodized aluminum (ACG)

Outside corner

Inside corner

6 - 1/4

8 - 5/16

10 - 3/8

12.5 - 1/2

EV/RO 60 ACG

EV/RO 80 ACG

EV/RO 100 ACG

EV/RO 125 ACG

IV/RO 60 ACG

IV/RO 80 ACG

IV/RO 100 ACG

IV/RO 125 ACG

Note: Inside and outside corners for the chrome-plated brass (MC) are made of aluminum with a polished chrome finish (ACG).

Inside Corner

Color-coated aluminum, PVC


Item No.

Aluminum

Aluminum

PVC

= H

= H

= H

H = mm - in.


6 - 1/4

8 - 5/16

10 - 3/8

11 - 7/16

12.5 - 1/2

(TS)

RO 60

RO 80

RO 100

RO 110

RO 125 color* color* color* color* color*


Accessories


Inside corner, 90°

Connector

Item No.


(TS)


IV/ profile item number*

V/ profile item number*

*

Color Codes

TSR

Rustic brown

TSBG

Greige

TSDA

Dark anthracite

TSI

Ivory

TSLA

Light anthracite

TSB

Beige

TSSG

Stone grey

TSOB

Bronze

MGS

Matte black

MBW

Matte white


(e.g., RO 60 TSC ).

TSC

Cream

TSG

Pewter


Item No.

H = mm - in.


PVC

6 - 1/4

8 - 5/16

10 - 3/8

11 - 7/16

12.5 - 1/2

(AC)

RO 60

RO 80

RO 100

-

RO 125 color* color* color* color*


(P)

PRO 60 color*

PRO 80 color*

PRO 100 color*

PRO 110 color*

PRO 125 color*

Accessories

Outside corner, end cap

Inside corner

Connector

*

Color Codes

BW

Bright white

HB

Light beige

GM

Metallic grey

W

White

HG

Light grey

SB

Black brown

SP

Sand pebble

PG

Classic grey

GS

Black

BH

Bahama

G

Grey

To complete the item number, add the color code

(e.g., RO 100 BW or PRO 80 G ).


(AC)

ED/ profile item number*

ID/ profile item number*

V/ profile item number*

Item No.

PVC

(P)

E/ profile item number*

I/ profile item number*

-


* To complete the item number for corners, add the corresponding profile item number (e.g., ED/ RO 60 BW ).

14

= H

= H

2.14 Schluter

®

-DECO-DE

Item No.

H = mm - in.

Stainless steel 304

(1.4301 = V2A)

(E)

8 - 5/16

10 - 3/8

DE 80 ES

DE 100 ES

11 - 7/16

12.5 - 1/2

DE 110 ES

DE 125 ES



(1.4301 = V2A)

(EB)

DE 80 EBS

DE 100 EBS

DE 110 EBS

DE 125 EBS

Aluminum

= H

1.9 Schluter

®

-DECO-SG

H = mm - in.


(AE)

W: 12.5 mm - 1/2"

8 - 5/16 SG 80 AE 12

10 - 3/8

11 - 7/16

SG 100 AE 12

SG 110 AE 12

12.5 - 1/2 SG 125 AE 12

Item No.

Bright chrome anodized aluminum

(ACB)

SG 80 ACB 12

SG 100 ACB 12

SG 110 ACB 12

SG 125 ACB 12

H = mm - in.


(AE)

W: 15 mm - 9/16"

8 - 5/16 SG 80 AE 15

10 - 3/8

11 - 7/16

12.5 - 1/2

SG 100 AE 15

SG 110 AE 15

SG 125 AE 15

Item No.

Bright chrome anodized aluminum

(ACB)

SG 80 ACB 15

SG 100 ACB 15

SG 110 ACB 15

SG 125 ACB 15

Stainless Steel

Stainless steel

= H

1.9 Schluter

®

-DECO-SG

Item No.

H = mm - in.

Brushed

Stainless

Steel

(EB)

W: 12.5 mm - 1/2"

8 - 5/16 SG 80 EB 12

10 - 3/8

11 - 7/16

SG 100 EB 12

SG 110 EB 12

12.5 - 1/2 SG 125 EB 12

H = mm - in.

Item No.

Brushed

Stainless

Steel

(EB)

W: 15 mm - 9/16"

8 - 5/16 SG 80 EB 15

10 - 3/8

11 - 7/16

12.5 - 1/2

SG 100 EB 15

SG 110 EB 15

SG 125 EB 15

15



37 mm - 1-15/32" r = 8 mm

5/16"

90º

= H

135º

37 mm -

1-15/32

"

= H

2.6 Schluter

®

-ECK-E

W = mm - in.

Stainless steel 304

(1.4301 = V2A)

(E)

90º Angle

Length supplied: 4' 11" — 1.50 m

6 - 1/4 E37 V2A 60/150

8 - 5/16

11 - 7/16

E37 V2A 80/150

E37 V2A 110/150


6 - 1/4 E37 V2A 60/200

8 - 5/16

11 - 7/16

E37 V2A 80/200

E37 V2A 110/200


6 - 1/4

8 - 5/16

11 - 7/16

E37 V2A 60/250

E37 V2A 80/250

E37 V2A 110/250

Length supplied: 9’ 10” — 3.00 m

6 - 1/4 E37 V2A 60/300

8 - 5/16

11 - 7/16

E37 V2A 80/300

E37 V2A 110/300

Item No.


(1.4301 = V2A)

(EB)

E37 V2A EB 60/150

E37 V2A EB 80/150

E37 V2A EB 110/150

E37 V2A EB 60/200

E37 V2A EB 80/200

E37 V2A EB 110/200

E37 V2A EB 60/250

E37 V2A EB 80/250

E37 V2A EB 110/250

E37 V2A EB 60/300

E37 V2A EB 80/300

E37 V2A EB 110/300

90º

= W r = 3 mm

1/8"

135º

= W

W = 9/16" 15 mm r = 1/32" -

1 mm

2.7 Schluter ® -ECK-K

W = mm - in.

Stainless steel 304

(1.4301 = V2A)

(E)

90º Angle


15 - 9/16

32 - 1-9/32

50 - 2

K15 V2A/150

K32 V2A/150

K50 V2A/150


32 - 1-9/32 K32 V2A/200

50 - 2 K50 V2A/200


15 - 9/16 K15 V2A/250

32 - 1-9/32

50 - 2

K32 V2A/250

K50 V2A/250


15 - 9/16

32 - 1-9/32

50 - 2

K15 V2A/300

K32 V2A/300

K50 V2A/300

2.7 Schluter ® -ECK-KI

W = mm - in.

Stainless steel 304

(1.4301 = V2A)

(E)


15 - 9/16 KI15 E/150


15 - 9/16 KI15 E/200


15 - 9/16 KI15 E


15 - 9/16 KI15 E/300

Item No.


(1.4301 = V2A)

(EB)

K15 V2A EB/150

K32 V2A EB/150

K50 V2A EB/150

K32 V2A EB/200

K50 V2A EB/200

K15 V2A EB/250

K32 V2A EB/250

K50 V2A EB/250

K15 V2A EB/300

K32 V2A EB/300

K50 V2A EB/300

Item No.


(1.4301 = V2A)

(EB)

KI15 EB/150

KI15 EB/200

KI15 EB

KI15 EB/300

16

2.6 Schluter ® -ECK-E

W = mm - in.

Stainless steel 304

(1.4301 = V2A)

(E)

135º Angle


6 - 1/4

8 - 5/16

11 - 7/16

E37 E 60S

E37 E 80S

E37 E 110S


6 - 1/4 E37 E 60S/300

8 - 5/16

11 - 7/16

E37 E 80S/300

E37 E 110S/300

Item No.


(1.4301 = V2A)

(EB)

E37 EB 60S

E37 EB 80S

E37 EB 110S

E37 EB 60S/300

E37 EB 80S/300

E37 EB 110S/300

Note: ECK-E is also available in stainless steel 316L

(1.4404 = V4A). Contact Customer Service for price and availability.

2.7 Schluter

®

-ECK-K

W = mm - in.

Stainless steel 304

(1.4301 = V2A)

Item No.

(E)

135º Angle


32 - 1-9/32 K32 ES/150


32 - 1-9/32 K32 ES


32 - 1-9/32 K32 ES/300

Note: ECK-K is also available in stainless steel 316L

(1.4404 = V4A). Contact Customer Service for price and availability.

W = 9/16" 15 mm r = 11/32" -

9 mm

2.7 Schluter ® -ECK-KHK

W = mm - in.

Stainless steel 304

(1.4301 = V2A)

(E)


15 - 9/16 KHK15 E/150


15 - 9/16 KHK15 E/200


15 - 9/16 KHK15 E


15 - 9/16 KHK15 E/300

Item No.


(1.4301 = V2A)

(EB)

KHK15 EB/150

KHK15 EB/200

KHK15 EB

KHK15 EB/300


Accessories

Item No.

Stainless steel 304

(1.4301 = V2A)

(E)


(1.4301 = V2A)

(EB)

E/KHK 15 EB Outside corner, 90º E/KHK 15 E

Inside corner, 90º

(2-way)

Inside corner, 90º

(3-way)

I/2KHK 15 E

I/3KHK 15 E

Connector V/KHK 15 E

I/2KHK 15 EB

I/3KHK 15 EB

V/KHK 15 EB

Inside corner, 2-way Inside corner, 3-way

= H

2.5 Schluter ® -RONDEC-DB

H = mm - in.


14 - 17/32

(AE)

DB 14 AE

Length supplied: 8’ 2-1/2” — 2.5 m

Item No.


(AK)

DB 14 AK


(AM)

DB 14 AM

Accessories

Outside corner, 90º


(AE)

EV/DB 14 AE

Item No.

5/16"

8 mm

7/32"

5 mm

2.5 Schluter

®

-RONDEC-DB

Length = 3.05 m - 10'

Item No.

H = mm - in.


(AE)

14 - 17/32 DB 14 AE/300

Aluminum

1" - 25 mm

1/4" -

6 mm

Stainless steel, Brass

1” - 25 mm

1/4" -

6 mm

2.2 Schluter ® -DESIGNLINE

H = mm - in.

6 - 1/4

H = mm - in.

6 - 1/4

Stainless steel 304

(1.4301 = V2A)

(E)

DL 625 E


(ACG)

DL 625 ACG

H = mm -

6 - 1/4 in.


(AKG)

DL 625 AKG



(1.4301 = V2A)

(EB)

DL 625 EB

Item No.

Stainless steel 304

(1.4301 = V2A) square check

Stainless steel 304

(1.4301 = V2A) leather texture

(ES1)

DL 625 ES1

(ES2)

DL 625 ES2

Chromeplated solid brass

(MC

DL 625 MC


(ACGB)

DL 625 ACGB


(AKGB)

DL 625 AKGB


(AT)

DL 625 AT

Item No.


(ATG)

DL 625 ATG

Item No.


(AM)

DL 625 AM


(ATGB)

DL 625 ATGB


(AMG)

DL 625 AMG


(AE)

DL 625 AE


(AK)

DL 625 AK


(AMGB)

DL 625 AMGB

Note: All corresponding item numbers of the

RONDEC finishes match DESIGNLINE.

17


18

2" - 50 mm

= H

2-7/8" - 72 mm

2.11 Schluter ® -QUADEC-FS

H = mm - in.


8 - 5/16

(AE)

QF8/50 AE



(ACG)

QF8/50 ACG

Item No.


(AT)

QF8/50 AT

Accessories


Item No.


Note: The same corner piece can be used to produce a 90° inside corner and a

90° outside corner. It can also be used as an end cap.

Inside/outside corner/

End cap


* To complete the item number for corners, add the corresponding profile item number

(e.g., EV/ QF8/50 AE ).


(ABGB)

QF8/50 ABGB

= H

A = 1-1/2" - 39 mm or 2-1/4" - 57 mm

2.8 Schluter ® -RONDEC-STEP

H = mm - in.


(AE)

A: 39 mm - 1-1/2"

8 - 5/16

10 - 3/8

12.5 - 1/2

RS 80 AE 39

RS 100 AE 39

RS 125 AE 39

A: 57 mm - 2-1/4"

8 - 5/16 RS 80 AE 57

10 - 3/8

12.5 - 1/2

RS 100 AE 57

RS 125 AE 57


(ACGB)


(AT)

RS 80 ACGB 39 RS 80 AT 39

RS 100 ACGB 39 RS 100 AT 39

RS 125 ACGB 39 RS 125 AT 39

RS 80 ACGB 57 RS 80 AT 57

RS 100 ACGB 57 RS 100 AT 57

RS 125 ACGB 57 RS 125 AT 57

H = mm - in.


(AM)

A: 39 mm - 1-1/2"

8 - 5/16 -

10 - 3/8

12.5 - 1/2

-

-

A: 57 mm - 2-1/4"

8 - 5/16 RS 80 AM 57

10 - 3/8 RS 100 AM 57

12.5 - 1/2 RS 125 AM 57

Length supplied: 8’ 2-1/2” — 2.50 m

Accessories



Inside corner, 90º

Inside corner, 135º

Item No.


(AMGB)

RS 80 AMGB 57 -

RS 100 AMGB 57 -

RS 125 AMGB 57 -


(ABGB)

RS 80 AMGB 39 RS 80 ABGB 39



Item No.

E 90 profile item number*


I 90 profile item number*


Item No.


(ATGB)

-

-

-

Outside Corner


(AK)

RS 80 ATGB 39 RS 80 AK 39

RS 100 ATGB 39 RS 100 AK 39

RS 125 ATGB 39 RS 125 AK 39

RS 80 AK 57

RS 100 AK 57

RS 125 AK 57

Inside Corner


(AKGB)

RS 80 AKGB 39

RS 100 AKGB 39

RS 125 AKGB 39

RS 80 AKGB 57

RS 100 AKGB 57

RS 125 AKGB 57


* To complete the item number for corners, add the corresponding profile item number (e.g., E 90 RS 80

ACGB 39 ).


= H

= H

A = 1-1/2" -

39 mm

2.9 Schluter

®

-RONDEC-CT

H = mm - in.

8 - 5/16

10 - 3/8

12.5 - 1/2


(AE)

RC 80 AE 39

RC 100 AE 39

RC 125 AE 39


(ACGB)


(AT)

RC 80 ACGB 39 RC 80 AT 39

RC 100 ACGB 39 RC 100 AT 39

RC 125 ACGB 39 RC 125 AT 39

Item No.


(ATGB)


(AK)

RC 80 ATGB 39 RC 80 AK 39

RC 100 ATGB 39 RC 100 AK 39

RC 125 ATGB 39 RC 125 AK 39

H = mm - in.

8 - 5/16

10 - 3/8

12.5 - 1/2


(AM)

RC 80 AM 39

RC 100 AM 39

RC 125 AM 39

Item No.


(AMGB)


(TSB)

RC 80 AMGB 39 RC 80 TSB 39

RC 100 AMGB 39 RC 100 TSB 39

RC 125 AMGB 39 RC 125 TSB 39



(TSOB) (TSG)

RC 80 TSOB 39 RC 80 TSG 39

RC 100 TSOB 39 RC 100 TSG 39

RC 125 TSOB 39 RC 125 TSG 39

Outside Corner Inside Corner Accessories



Inside corner, 90º

Inside corner, 135º

Item No.






(AKGB)

RC 80 AKGB 39

RC 100 AKGB 39

RC 125 AKGB 39


* To complete the item number for corners, add the corresponding profile item number (e.g., E 90 RC 80 AK 39 ).

19

= H

A = 1-3/16" - 30 mm or 1-1/2" - 39 mm

= H = 7/16 - 11 mm

2.8 Schluter

®

-SCHIENE-STEP

H = mm - in.

Profile

A: 39 mm - 1-1/2"

6 - 1/4

9 - 11/32

11 - 7/16

12.5 - 1/2

A: 30 mm - 1-3/16"

9 - 11/32

11 - 7/16

12.5 - 1/2

A: 11 mm - 7/16"

6 -

12.5 -

1/4

1/2

SS 60 EB 39

SS 90 EB 39

SS 110 EB 39

SS 125 EB 39

SS 90 EB 30

SS 110 EB 30

SS 125 EB 30

SS 60 EB 11

SS 125 EB 11


Item No.

Brushed Stainless Steel 304 (1.4301 = V2A) (EB)

Inside corner, 90° Inside corner, 135°

Outside corner, 90° and

End Cap


I90 / SS 60 EB 39

I90 / SS 90 EB 39

I90 / SS 110 EB 39

I90 / SS 125 EB 39

I135 / SS 60 EB 39

I135 / SS 90 EB 39

I135 / SS 110 EB 39

I135 / SS 125 EB 39

E90 / SS 60 EB 39

E90 / SS 90 EB 39

E90 / SS 110 EB 39

E90 / SS 125 EB 39

E135 / SS 60 EB 39

E135 / SS 90 EB 39

E135 / SS 110 EB 39

E135 / SS 125 EB 39

-

-

-

H = mm - in.

-

-

-

E90 / SS 90 EB 30

E90 / SS 110 EB 30

E90 / SS 125 EB 30

Item No.

Brushed Stainless Steel 304 (1.4301 = V2A) (EB)

-

-

-

Connector

A: 39 mm 1-1/2"

6 - 1/4

9 - 11/32

11 - 7/16

12.5 - 1/2

A: 30 mm 1-3/16"

9 - 11/32

11 - 7/16

12.5 - 1/2

A: 11 mm 7/16"

6 - 1/4

12.5 - 1/2

V / SS 60 EB 39

V / SS 90 EB 39

V / SS 110 EB 39

V / SS 125 EB 39

V / SS 90 EB 30

V / SS 110 EB 30

V / SS 125 EB 30

V / SS 60 EB 11

V / SS 125 EB 11

Schluter

®

Systems Wall and Countertop Profiles 5-Year Limited Warranty

LIMITED WARRANTY COVERAGE: Subject to the conditions and limitations as stated in this Schluter ® Systems Wall and Countertop Profiles 5-Year Limited Warranty

(the “ Limited Warranty ”), Schluter Systems warrants that its Schluter ® -JOLLY, Schluter ® -SCHIENE, Schluter ® -DESIGNBASE-SL, Schluter ® -RONDEC-DB, Schluter ® -QUADEC,

Schluter ® -QUADEC-K, Schluter ® -DIADEC, Schluter ® -DIADEC-K, Schluter ® -QUADEC-FS, Schluter ® -RONDEC, Schluter ® -FINEC, Schluter ® -DESIGNLINE, Schluter ® -DECO-

DE, Schluter ® -ECK-E, Schluter ® -RONDEC-STEP, Schluter ® -DECO-SG, Schluter ® -ECK-K, Schluter ® -RONDEC-CT, Schluter ® -INDEC, Schluter ® -ECK-KI, Schluter ® -ECK-KHK,

Schluter ® -SCHIENE-STEP, and Schluter ® -REMA (collectively, the “ Products ”) will be free from manufacturing defects and will perform as described in the Schluter Systems

Wall and Countertop Profiles Technical Data Sheet (collectively, the “ Written Materials ” 1 ) for a period of five (5) years from the date of purchase when installed and used in accordance with the terms and conditions of the Written Materials and industry standard guidelines that are not in conflict with the Written Materials in effect at the time of installation.

For the purposes of this Limited Warranty, “ Owner ” is defined as the original end user of the property in which the Products are installed; and “ Tile Assembly ” is defined to include the Products, non-reusable tile surfaces, and applicable setting and grouting materials.

This Limited Warranty is only applicable to installations in the United States of America and Canada. Schluter Systems is not responsible or liable under any circumstances for determining the suitability of the Products for the Owner’s intended purpose. It is the responsibility of the Owner to consult with an experienced and professional installer to ensure the suitability of the Products, subfloor/substrate and all building materials in the installation and that the Written Materials are followed properly.

RESOLUTION: If the Products are installed and used in accordance with the terms and conditions as described hereinabove and such Products are proven defective within the applicable warranty term, the Owner’s exclusive remedy and the sole obligation of Schluter Systems, at its election, shall be to (a) reinstall or replace the failed portion of the Tile

Assembly or (b) pay an amount not to exceed the original square foot cost of the installation of the Tile Assembly verified to be defective. Due to conditions beyond the control of Schluter Systems (e.g., color and shade availability, discontinuation, normal wear and tear), Schluter Systems cannot guarantee or warrant an exact match to the specific tile, stone, or other flooring materials used in the original installation. In such event, substantially similar materials may be substituted.

EXCLUSIONS FROM COVERAGE: This Limited Warranty excludes and in no event shall Schluter Systems have any liability for any indirect, special, incidental, punitive, exemplary, or consequential damages, including lost profits, arising out of or otherwise connected to the failure of the Products or Tile Assembly, regardless of any strict liability or active or passive negligence of Schluter Systems, and regardless of legal theory, whether in contract, tort, extra-contractual or other. This Limited Warranty further excludes any loss or damage arising out of or otherwise connected to: acts of war, terrorism, fire, explosion, natural disaster, acts of God, any failure to comply with the Written Materials, inadequate subfloor/substrate, improper preparation or other failure of subfloor/substrate, faulty or negligent penetration of the Products or subfloor/substrate, intentional acts of destruction, structural failure, misuse of or failure to maintain the Products, normal wear and tear, scratches, dents, corrosion or discoloration (whether caused by excessive heat, chemical cleaning products, abrasive agents or otherwise), efflorescence and shading which are a natural occurrence with cementitious materials and are not considered a defective condition for the purposes of this Limited Warranty, variations of texture, color or shade from those on product samples, packaging materials or other marketing materials, or other causes unrelated to the Products (e.g. tile covering failure, excess point loading, overvoltage). This Limited Warranty excludes exterior applications and applications utilizing glass tile or other non-approved tile surfaces, unless specifically approved in writing on a case by case basis by the Schluter Systems Technical Services

Director.

This Limited Warranty is conditioned and will be considered null and void and Schluter Systems will have the right to refuse any claims if: (a) the Products have been improperly stored or installed, or (b) the Products are subject to abusive or abnormal use, lack of maintenance, or used in a manner other than that for which the Products were designed or in any way contrary to the Written Materials.

DISCLAIMER: There are no warranties beyond this expressed warranty as stated herein. To the extent permitted by law, all other warranties, representations or conditions, expressed or implied, are hereby disclaimed and excluded, including but not limited to the implied warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR

PURPOSE (as limited to such purposes as described in the Written Materials) or arising from a course of dealing, usage of trade or otherwise by law. ANY IMPLIED WARRANTIES

ARISING BY OPERATION OF LAW ARE LIMITED IN DURATION TO THE TERM OF THIS LIMITED WARRANTY. NO REPRESENTATION, PROMISE, AFFIRMATION OR

STATEMENT BY ANY EMPLOYEE OR AGENT OF SCHLUTER SYSTEMS WILL BE ENFORCEABLE AGAINST SCHLUTER SYSTEMS UNLESS IT IS SPECIFICALLY INCLUDED

IN THIS LIMITED WARRANTY OR AUTHORIZED IN WRITING BY THE SCHLUTER SYSTEMS TECHNICAL SERVICES DIRECTOR. This Limited Warranty is given in lieu of any other warranty, whether expressed or implied. The remedies contained herein are the only remedies available for breach of this Limited Warranty. This Limited Warranty extends only to the Owner and is not transferable or assignable unless authorized by written agreement and signed by the Schluter Systems Technical Services Director or otherwise prohibited by specific state or provincial law. This Limited Warranty gives you specific legal rights; some states and provinces do not allow disclaimers or other restrictions of implied warranties; some of the above disclaimers may not apply to you. No changes or modifications of any terms or conditions of this Limited Warranty are permitted unless duly authorized in writing by the Schluter Systems Technical Services Director.

This Limited Warranty shall supersede and replace any and all prior oral or written warranties, agreements, or other representations made by or on behalf of Schluter Systems relative to the Products or the application of the Products and shall apply to any installation occurring on or after April 8, 2019. If the Products are used in conjunction with other Schluter products, a different Schluter warranty may apply.

For the most current information and materials regarding Schluter Systems warranties and programs, please visit https://www.schluter.com/schluter-us/en_US/downloadfiles.

MAKING A CLAIM: To make a claim under this Limited Warranty, the Owner must provide Schluter Systems 2 with written notice within thirty (30) days of any alleged defect in the Products covered by this Limited Warranty, together with date and proof of purchase of such Products and/or all of its components and name and address of all installers and all invoices related to the original installation, failing which this Limited Warranty shall have no legal effect 3 . Schluter Systems reserves the right at its election and as a condition of this Limited Warranty to inspect the alleged failed and/or defective Products.

All U.S. Claims shall be sent to: All Canadian Claims shall be sent to:

Schluter Systems L.P.

Attn: Warranty Claims Dept.

194 Pleasant Ridge Road

Plattsburgh, NY 12901-5841

Schluter Systems (Canada), Inc.

Attn: Warranty Claims Dept.

21100 chemin Ste-Marie

Ste-Anne-de-Bellevue, QC H9X 3Y8

1 If there are any conflicting terms between any Written Materials, the most recently updated document shall be deemed to control.

2 This Limited Warranty is limited to sales of the Products made in and intended for use in the United States and Canada. For the purposes of this Limited Warranty, Schluter Systems L.P. shall offer warranty coverage to

Owners located in the United States, and Schluter Systems (Canada) Inc. shall offer warranty coverage to Owners located in Canada.

3 In the event that Owner fails to provide such required invoices relating to the original installation, Schluter Systems shall pay Owner an amount equal to the average, reasonable costs of a comparable installation. If the parties fail to agree on such amount, such dispute shall promptly, and in the first instance, be submitted: (a) if a U.S. claim, to arbitration in Clinton County, New York, in accordance with the rules of the American

Arbitration Association, or (b) if a Canadian claim, in the Province of Quebec, Canada, in accordance with the ADRIC Arbitration Rules. Any outcome of such arbitration proceeding shall be final and binding upon the parties hereto.

Schluter Systems L.P.

• 194 Pleasant Ridge Road, Plattsburgh, NY 12901-5841 • Tel.: 800-472-4588 • Fax: 800-477-9783

Schluter Systems (Canada) Inc.

•

21100 chemin Ste-Marie, Ste-Anne-de-Bellevue, QC H9X 3Y8

•

Tel.: 800-667-8746

•

Fax: 877-667-2410

www.schluter.com

Schluter Systems EV/RO110TSLA Rondec Light Anthracite 7/16 in. x 1 in. Color-Coated Aluminum Tile Edging Trim 90-Degree Outside Corner Manual

WALL AND

COUNTERTOP PROFILES

-JOLLY

-QUADEC

-DESIGNBASE-SL

-RONDEC-DB

-DIADEC

-QUADEC-FS

-RONDEC

-FINEC

-DESIGNLINE

-DECO-DE

-ECK-E

-RONDEC-STEP

-DECO-SG

-ECK-K

-RONDEC-CT

-INDEC

-ECK-KI/-KHK

-SCHIENE-STEP

Ceramic and stone tiles are durable, hygienic, heat resistant, and easy to maintain, representing the ideal surface covering for walls and countertops. However, lack of trim pieces such as bullnose or quarter round in many tile lines can limit designers’ options.

Schluter

-Systems offers various finishing and edge-protection profiles for walls and countertops that offer increased design flexibility because they can be integrated with any field tile to create a beautiful, durable installation.

Application and Function

Wall Profiles

Border Profiles

Countertop Profiles

Wall Access Panel System

11.1 Schluter

Material Properties and

Areas of Application

Cutting Profiles

Installation

JOLLY, QUADEC, RONDEC, DECO-DE,

DIADEC, FINEC, INDEC, DECO-SG,

ECK-E, RONDEC-DB, SCHIENE-STEP,

RONDEC-STEP, and RONDEC-CT

ECK-K/-KHK/-KI

QUADEC-K/DIADEC-K

DESIGNBASE-SL

QUADEC-FS

DESIGNLINE

REMA

Maintenance

Product Item Numbers

Color Codes

Schluter

-TRENDLINE Textured Color-coated Aluminum

Color Codes

Matte White and Matte Black

Color Codes

* To complete the item number, add the color code (e.g., A 60 MGS ).

Stainless Steel

Aluminum

Aluminum

Color Codes

Color Codes

* To complete the item number, add the color code (e.g., Q 45 G ).

PVC

Color Codes

* To complete the item number, add the color code (e.g., PQ 80 PG ).

Color Codes

* To complete the item number, add the color code (e.g., F 70 TSC ).

Aluminum

Stainless Steel

Stainless Steel

Aluminum

Brass

Color-coated aluminum, PVC

Color Codes

Color Codes

Aluminum

Stainless Steel

2.8 Schluter

-SCHIENE-STEP

Schluter

Systems Wall and Countertop Profiles 5-Year Limited Warranty

www.schluter.com

Related manuals