P O W E R C O N V E R S I O N P R O D U C T S
SWI Series Pure Sine Wave Inverter
FEATURES
• Switching mode design
• High efficiency
• Pure sine wave output voltage
• 24 VDC input and 230 VAC output
• Overload protection
• High output current surge
• Low battery alarm / shut down
• Low idle power draw of less than 1.4 Amps
• Hand Wire / Schuko output
• Remote input
• 2 Year warranty
APPLICATIONS
• Service vehicles
• Recreation Vehicles
• Telecommunication
• Solar power systems
• Trucks
• Marine
3000 WATTS
TECHNICAL SPECIFICATIONS
Model
Input voltage
Input Current at No Load
Output Voltage
Output frequency
Output Voltage Waveform
Total Harmonic distortion
Output Power
Continuous
Surge (for <1 second)
Low Input Voltage Warning Alarm
Low Input Voltage Shut-down
High Input Voltage Shut-down
Operating Ambient Temp
Peak Efficiency
Cooling
Connections
Input
Output
DC Side Input Fuse
(automotive Type ATC 32V)
Dimensions (LxWxH)
Weight
Remote controller (optional)
SWI 3000-24
21.4 - 33 VDC
<1.4 A
230 VAC+/-3%
50 Hz
Sine Wave
<3%
3000 Watts*
6000 Watts*
21.4 V +/- 0.2 V
20 V +/- 0.2 V
>33 V
-20 to 40°C+/-5°C
>90%
1 x Temperature Controlled Fan
Hex screw M10 connection
Hand Wire / VDE European Outlet
15 A x 12
456.5 x 263 x 145 mm
9.8 Kgs
RC-300
The power specified is for resistive type of loads (like incandescent lamps, heaters etc.) which have a power factor = 1.
Reactive type of loads (like electric motor driven loads, fluorescent lights, computers, audio/video equipment etc.) may have a power factor of 0.8 to 0.6. The power that can be delivered to such type of loads will reduce by this factor.
Technical Specifications subject to change without notification.
To view a full selection of Samlex products visit our website at: www.samlex.com or www.samlex-solar.com
