MyBinding Akiles CoilMac EX Pro Manual

 Akiles CoilMax-EX Pro
4:1 Oval Hole Electric Coil
Binding Machine with Electric
Coil Crimper and Inserter
Instruction Manual 4
ZAP] Provided by
yBinding;:
When Image Matters.
Call Us at 1-800-944-4573
Maintenance
1. Take off the front cover of
the machine by first removing
the 4 screws.
3, Punch scratch paper or
paper towels to get rd of
excess residue.
Technical Information
CoilMac-EX Pro
Fully disengageable pins, Oval (4 x Smm) holes, 0.2475" pitch
2. Lubricate the punching blades
with lithium or synthetic grease.
BINDING FORMAT
CoilMac -EX Pro
Legal (14" or 356 mm) || =54 + 2 holes | =53+2 holes |=65+5 holes || =55+ 2 holes
Oficio (13" or 330 mm)|| = 52 holes = 53 holes = 65 holes = 54 holes
Ad 11.69” or 297 mm) || =47 holes = 46 holes = 59 holes = 49 holes
Letter (11" or 279 mm)|| = 44 holes = 43 holes = 55 holes = 46 holes
A5( 8.27" or 210 mm) || = 33 holes = 33 holes = 41 holes = 34 holes
112 Letter (8.5" or 215.9 mm)| | = 34 holes = 32 holes = 42 holes = 35 holes
Mo. Sheets DOCUMENT COIL No. Sheets DOCUMENT COIL
(20 lbs) inch mm mm (20 lbs) inch ma min
25 118" 3.2mm 5 mm 180 3 190mm 20mm
CAPACITY 45 532 4.0 mm 6 mm 200 25132" 19.8 mm 22 mm
45 3116" 4.8 mm 7 mm 230 TE" 222mm 25mm
& 60 1/4" 6.4 mm 8 mm 250 #1" 254 mm 28 mm
Bu 546° 79mm 10mm 300 1m 28.5 mm 32mm
100 1332" 103mm 12mm 350 1-546"333mm 38mm
120 1532" 11.9 mm 14 mm 400 1-216" 39.7 mm 45mm
150 19/32" 15.0 mm 17 mm 450 1-78" 475mm 50mm
Warranty Policy
Your machine has a warranty of one year from the dale of purchase. In the event of a manufacturer's
defect, your distributor will repair or replace the machine at their option. This warranty does not
cover damages due to improper use or mis-treatment of the unit, including any extraordinary event
leading to the damage of the machine, whether it is reversible or not.
Ifthe machine is not working properly, please contact your dealer for technical support. Please have
your machine's serial number and purchase date ready. If the machine must be returned for repair, it
is your responsibility to properly pack and ship the machine as any damage incurred during its
transportation is not covered by our warranty policy.
CoilMac EX Pro
Operation Manual
Foot Pedal Power Power
InPort In Port Switch Crimper Head 0 =
— < <. > | Adjustment Knob —-
= Top Alignment “Sy as
(Sack of the Machine} Guide sae a
pe AS
Electric Crimper =” a
e
Side Alignment *
Guide
Crimper Unit
Crimp / Punch Toggle Switch
Depth Margin Control
Waste Drawer — Continuous Punch Guide
Roller o : Coil Inserting Roller
Adjustment Knob >
Roller Adjustment
Scale
|. Place your new CoilMac-EX Pro on top of a sturdy working table (Picture 1),
2. Plug the power cord and foot pedal into the back of the machine (Picture 2).
3. Place the foot pedal on the floor and tur on the power switch behind the machine (Picture 3}.
safety Instructions
" Keep fingers, hair, jewelry, neckties and any other loose clothing or objects away from the roller,
as they may be accidentally pulled into the roller during use.
* Do not allow children to operate the machine, as it is not a toy.
* Always turn off the machine and place the foot pedal out of reach when machine is not in use.
* To reduce the risk of electrical shock, never operate the machine near water.
* Do not use the machine if the power cord is damaged.
* Do not allow the electrical cord to be in contact with hot surfaces.
* In case of malfunction, please contact your dealer for technical support.
4 .
wo
1. Use the included Coll Size Guide to determine the correct PP EA u
Depth Margin and Coil Diameter for your book (Picture 1). + >
a
|
2, Push and tum the Depth Margin Control AN “st ae A
to 1 of 4 colors depending on the size of your book, I || Aa E =
(Picture 2a). The Depth Margin Control knob should I 4 & tum ve
Re,
lock into 1 of 4 positions (Picture 2b). des Ja Tree act
2a “= Push To Sat] | 2b
3
3. OPTIONAL: Use the Coil Diameter Selector to check 74
that you are using the correct coil size for your book € ne —
(Picture 3}. ++ #
1. Make sure the Function Control on the front of the machine is set to Punch.
2. Use the Punch Throat Ruler and Side Margin Control to center the punching of your document
(Picture 1 and 2). To see if you need to disengage any holes, insert a sheet and disengage
any hole that is left partially exposed on the Punch Throat Ruler. Failure to do so, will leave a partially
punched hole al the edge of your document,
For CoilMac-EX Pro (Oval Holes)
All holes are disengageable which guarantee a clean punch on sheets of any size.
1. АВЕ. 2. EXXEXE EEN ED
11" = “|
AS | |
«|.
11" & 8.5" Sheet |
Ad £ AS Sheet |
3. Insert sheets and press the foot pedal to punch.
Maximum single punching capacity is 25 sheets (20 №6 paper).
Recommended number of sheets per punch (for maximum equipment durability): 20 sheets (20 Ib paper).
Empty the waste drawer from time to time. An overfillad waste drawer may cause the machine to malfunction
and void your warranty.
For Documents Larger than 14” (356 mm)
1. 2. 5
SEES BPE hee eee
=
1. Align sheets as indicated 2. Remove the sheets and 3. Insert the sheet from the
on punch throat ruler. Insert flip them over as illustrated. right hand side and put the
sheets and press foot pedal The punched holes should Continuous Punch Guide
to punch the left side first, alignment knob into one of
the holes. Now press the
foot pedal to punch the
holes on the left.
now be on your right side.
IN CASE OF PAPER JAM
The punch cycle will automatically stop when the machine is overloaded with too many sheets,
Wihen this occurs, please use the manual jam release.
1. Shut off the power switch. a Of «4 И ¿14
2. Insert a 6 mm Allen key (not included) into the hole J и f A |
in the left side panel of the machine (Picture A). O «} ha E = |.
3. Rotate the Allen key counter clockwise to E El y
pull the punch pins out of the sheel (Picture B). a Ly
4. Remove all sheets from the punch throat.
5. Remove Allen key from the machine, then turn ON the power and press the foot pedal
to make sure machine operates correctly.
Coil Inserting & Crimping
Inserting
1, Unlock Roller Adjustment Knob (turn counter-clockwise) and adjust the Bottom Roller foward
or backward on the Roller Adjustment Scale depending on the size of the coil being used, Lock
the Roller Adjustment Anob (turn clockwise) once aligned. (See picture 1)
2. Hand insert the coil into the first 4 or 5 punched holes. (See picture 2)
3, Flip the Roller On / Off Switch to start the coil inserter. Hold document evenly, so that the coil
touches the roller and spins into the book. Once the coil is all the way through, remove the book from
the roller. If the coil goes too far, flip the book and spin the coil into the book again. ‘Your goal is to
have the coil protrude about 1° on each side of the document. Turn off the Roller ON / OFF Switch
when you are done. (See picture 3)
Crimping
1. Make sure the Crimp / Punch Toggle is зе to Crimp. Turn Crimper Head Adjustment Knob fully
clockwise (6-25 mm) or counter-clockwise (25-50 mm) depending on the coil size being crimped
(See picture da). Place the booklet on the Crimper Unit (See picture 4b).
2. Step on the foot pedal and the electnic crimper will cut and crimp one end of the coil. Flip the book
and step on the foot pedal to crimp the other side.
Roller Adjustment Knob
1
Roller Adjustment Scale