.1

.1

.1

1

CONTENT

CONTENT ---------------------------------------------------------------------------------------------------------------------------------1

IMPORTANT SAFETY PRECAUTIONS --------------------------------------------------------------------------------------2

ASSEMBLY INSTRUCTIONS ---------------------------------------------------------------------------------------------------3-5

FOLDING & UNFOLDING INSTRUCTIONS --------------------------------------------------------------------------------6

GROUNDING METHODS -----------------------------------------------------------------------------------------------------------7

OPERATION GUIDE ---------------------------------------------------------------------------------------------------------------8-15

GETTING STARTED GUIDE -----------------------------------------------------------------------------------------------------16

SAFETY EXERCISES ---------------------------------------------------------------------------------------------------------------17

WARM-UP EXERCISES ------------------------------------------------------------------------------------------------------------18

MAINTENANCE INSTRUCTIONS ---------------------------------------------------------------------------------------------19

BELT ADJUSTMENT ----------------------------------------------------------------------------------------------------------------20

EXPLODED DRAWING -------------------------------------------------------------------------------------------------------------21

PARTS LIST -------------------------------------------------------------------------------------------------------------------------22-23

ERROR CODE AND TROUBLE SHOOTING -----------------------------------------------------------------------------24

2

IMPORTANT SAFETY PRECAUTIONS

WARNING: Before starting any exercise program, consult your physician or health professional ， especially for person who is above 35 years old or had some health problems before. Neither manufacturer nor distributor should be held responsible for any injuries or discomfort by the user due to above reasons.

Don't plug in power until you finish assembling the treadmill.

ATTENTIONS:

1. When using this treadmill, attach the safety key pull pin to your clothes or belt.

2. Do not plug anything into any parts of this treadmill, or it may cause damage.

3. Position treadmill on a clean, level surface. Do not place the treadmill on thick carpet as it may interfere with proper ventilation. Whereby necessary, use a rubber or PVC treadmill mat. Do not place treadmill near water or outdoors, moisture will cause damage to electronics.

4. Do not start the treadmill while standing on the walking belt. After turning the power on and adjusting the speed control, there may be a few seconds before the walking belt begins to move, always stand on the foot rails on the sides of the frame until the belt is moving. Hold onto handrails when initially start walking or running on the treadmill, let go until you are comfortable with its speed.

5. Wear appropriate clothing when exercising on the treadmill. Do not wear long, loose fitting clothing that could be caught in the treadmill. Always wear running or aerobic shoes with rubber soles.

6. Keep small children and pets away from the treadmill while switched on.

7. This treadmill is designed for adult use, children intent to use the treadmill must have adult supervision.

8.The power cord of motorized treadmill is specialized for its purpose. Do not attempt to modify or repair it yourself. Do not place heavy object on power cord or leave it near high temperature, only plug it into well earthed power point. If it is damaged, please purchase new from distributor or contact our company directly.

9. If case of an electrical failure or safety key being pulled from its pot during exercise, this treadmill may come to a stop in 3-4 seconds. Hold onto hand rail until it completely stops and step down through the side foot rails. Do not attempt to jump off the treadmill while it’s still in motion.

10. When the treadmill is not being used, unplug power cord and remove safety pull pin. Keep them in safe place and do not use them for other purpose.

11. This treadmill is designed for home use only with maximum user weight 110kg. It is improper to put it into a corporate or commercial environment and it won’t be covered by its domestic warranty.

WHEN YOU OPEN THE CARTON, YOU WILL FIND THE BELOW PARTS:

Main frame

1set

D21 Washer M10

8 PCS

D8 Round head hex bolt

M10*15

4 PCS

C13 Safety key

1 PC

D2 Allen wrench 6mm

1 PC

C32 Chest belt

1PC

D1 Screw dirver

1 PC

D12 Round head hex bolt M10*55

4 PCS

B11L Left side cover

1 PC

C19 MP3 cable

1 PC

B11R Right side cover

1PC

D48 Cross self-tapping bolt ST4.2*19, washer

6 PCS

C15 Power cable

1 PC

B49 Bottle holder

2 PCS

NOTE: Do Not Tighten Bolts At Once.

3

STEP 1 ： Follow the below diagram to lift up the computer bracket. Be careful not to cut, jam and damage cables inside the frame tubes when folding up.

4

STEP 2: Use bolt M10*55 (D12) and flat washer M10 (D21) to tighten bottom uprights, and fix console/handrail bracket with bolt M10*15 (D8) and flat washer M10 (D21).

D21 D8

D21

D8

5

Step 3: Tighten left/right side covers (B11L/R) with cross self-tapping bolt ST4.2*19, washer (D48).

Step 4: Place on bottle holders (B49), safety key (C13), MP3 cable (C19), and power cable

(C15).

ATTENTION: Check that all nuts and bolts are tightened before using the treadmill. Please read the below instructions carefully.

Folding instruction

Lift up the machine and apply force to push up until you hear "click" from the latch, which indicates that locking mechanism is engaged.

Unfolding instruction

Use foot to press the latch lightly until the cylinder disengages and treadmill deck starts folding down. Hold onto the deck to support the fold down until you are in safe space to the drop. Let go and the deck will drop slowly (soft drop) until it reaches ground.

6

Grounding methods

This treadmill must be grounded properly. It is equipped with a cord connecting to an equipment-grounding conductor and a grounding plug. The 3 pin plug must be plugged into an appropriate power outlet that complies with industrial codes and local requirements in relate to grounding.

DANGER – Improper connection of the equipment-grounding conductor can result in risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product.

7

If it does not fit the power outlet, please have a proper outlet installed by a qualified electrician. No adapter should be used with this product.

Operation Guide

1.1. WINDOW DISPLAY

1.2. START

Treadmill starts at 0.8kph after 5 seconds countdown

1.3 PROGRAM

1 manual mode ， 15 pre-set programs, 3 countdown functions, 1 body fat program, 3 users programs,

3 HRC programs.

1.4. SAFETY LOCK FUNCTION

Window shows"---" when safety key is taken away from the lock and treadmill will stop quickly with "didi" beeping alarm. Put the safety key back on and all windows will light up for 2 seconds and then show 0 or default values.

1 .5.BUTTON FUNCTION

1.5.1. START/STOP

“START”--When treadmill is switched on, press this button to start, initial speed is “0.8”

“STOP”--When treadmill is running, press this button to stop, it will quickly stop in a few seconds and return to manual mode after stopping.

8

1.5.2 “PROGRAM” BUTTON

When treadmill is switched on, press this button to have exercise options from manual mode to pre-set modes ( P1-P15,1 Body fat, U1-U3, HRC programs).

1.5.3 “MODE” BUTTON

When treadmill is switched on, press this button to choose countdown modes:”H-1”,”H-2”,”H-3”;

H-1” is the time countdown mode, “H-2” is the distance countdown mode, “H-3” is the calorie countdown mode; press “SPEED+/-” or “INCLINE+/-“button to adjust the set values to desired values. After that, press “START”

button to start the treadmill.

1.5.4

“SPEED +/- “BUTTON

SPEED +/– --Adjust speed when treadmill starts, the increment is 0.1km with each press. Hold on button for continuous adjustment.

1.5.5 SPEED QUICK BUTTON

Press speed quick button 4km/h ， 6km/h ， 8km/h, 10km/h, 12km/h , 16km/h, 18km/h to adjust speed towards the desired speed when the treadmill is running.

1.5.6 “INCLINE+/-” BUTTON

INCLINE +/ – --Adjust incline when treadmill starts; the increment is 1 section with each press. Hold on the button for continuous adjustment.

1.5.7 INCLINE QUICK BUTTON

Press incline quick button 2,4,6,8,10,12,15 to adjust incline level towards desired level when the treadmill is running.

1.6. DISPLAY FUNCTION

1.6.1 SPEED

Display running speed in km/h.

1.6.2 TIME

Display total accumulated running time or countdown time left in a program.

1.6.3 DISTANCE

Display accumulated total distance or distance countdown.

1.6.4 CALORIE

Display accumulated calorie burnt or calorie countdown.

9

1.6.5 INCLINE

Display incline level in 15 increments.

1.6.6 PULSE

Display pulse data.

1.6.7 ALL WINDOW DISPLAY DATA RANGE

TIME ： 0:00 – 99.59(MIN)

DISTANCE: 0.00 – 99.9(KM)

CALORIES: 0.0 – 999 (kcal)

SPEED:0.8-18.0(km/h)

PULSE: 50 – 200 (BPM)

INCLINE ： 0 – 15 level

1.7 PULSE FUNCTION

When the treadmill is running, hold on hand pulse pads for about 5 seconds, it will then display your pulse reading. A heart-shaped symbol will flash when testing pulse. The heart rate measurement is only good as exercise reference and can not be used as medical data.

1.8 PROGRAM EXERCISE CHART

TIME

PROG.

P1

SPEED

1

2

2

5

3

5

4

5

5

10

Set time/16 = Time in each operation

6

10

7

5

8

5

9

5

10

3

11

3

12 13 14 15

2 5 5 3

16

2

INCLINE 0 0 1 1 1 1 2 2 2 2 3 3 3 2 2 0

P2

P3

SPEED 2 2 7 2 2 7 7 12 4 4 12 4 4 12 4 2

INCLINE 0 1 2 2 3 3 2 2 3 3 2 2 3 2 2 0

SPEED 2 4 9 9 4 4 8 8 10 10 12 4 4 8 4 2

INCLINE 0 1 2 3 4 5 4 5 4 2 1 2 3 2 1 0

P4

P5

P6

P7

P8

SPEED 2 6 6 6 12 12 12 12 6 6 3 3 3 5 5 2

INCLINE 0 1 2 3 4 5 6 7 6 6 5 4 3 2 1 0

SPEED 2 4 6 12 12 12 3 3 3 3 12 12 12 6 4 2

INCLINE 0 2 4 6 4 2 1 0 1 1 2 2 2 2 3 0

SPEED 2 4 5 5 6 6 8 8 6 6 8 8 6 9 6 2

INCLINE 0 1 3 4 4 3 3 1 2 1 2 1 2 1 2 0

SPEED 2 7 7 9 9 4 4 12 12 4 4 8 8 4 4 2

INCLINE 0 1 1 2 2 3 3 4 4 3 3 2 2 1 1 0

SPEED 2 2 6 6 6 8 9 10 11 12 9 5 5 5 3 2

INCLINE 0 1 2 4 2 1 2 4 2 1 2 4 2 1 2 0

10

P9

P10

P11

P12

P13

P14

P15

SPEED 2 4 8 10 2 4 8 10 2 4 10 2 4 10 4 2

INCLINE 0 1 2 3 4 5 6 7 8 9 8 6 4 2 1 0

SPEED 2 5 6 7 8 9 10 11 10 9 8 6 7 5 4 2

INCLINE 0 1 2 4 6 6 6 4 4 4 2 2 2 1 1 0

SPEED 2 5 6 7 9 9 6 9 6 9 6 10 6 10 7 2

INCLINE 0 2 2 2 3 3 3 4 4 4 5 5 5 4 4 0

SPEED 2 6 8 10 8 6 4 6 8 12 8 6 8 12 12 2

INCLINE 0 1 1 3 3 5 5 7 7 5 5 3 3 1 1 0

SPEED 2 12 4 12 4 12 4 12 4 12 4 12 4 12 4 2

INCLINE 0 8 10 13 4 8 10 13 4 8 10 13 4 8 10 0

SPEED 2 8 10 12 4 8 10 12 4 8 10 12 4 8 10 2

INCLINE 0 8 12 13 4 8 12 13 4 8 12 13 4 8 12 0

SPEED 2 12 10 8 12 12 10 8 12 12 10 8 12 12 10 2

INCLINE 0 3 4 5 6 8 7 8 8 7 7 6 5 4 3 0

1.9 Manual mode operation

1.9.1

Press start key, time counts down 5 seconds, then treadmill will start to work with initial speed 1km/h.

1.9.2

Press speed +/- to adjust speed.

1.9.3

Press incline+/- to adjust incline.

1.9.4

Press stop, you can stop treadmill at anytime.

1.9.5

Press quick speed key, you can quickly adjust speed to what you want.

1.9.6

Press quick incline key, you can quickly adjust incline to what you want.

1.10 3 COUNTDOWN FUNCTION PARAMETER DATA

1.10.1

Countdown time initial setting: 15 ： 00 minutes. Available range: 5 ： 00---99 ： 00 minutes.

Each interval: 1 ： 00.

1.10.2

Countdown calorie initial setting: 50 kcal. Available range: 10-990 kcal. Each Interval: 10.

1.10.3

Countdown distance initial setting: 1.0km. Available range: 0.5---99.9 km. Each interval: 0.1km.

Options are set in order as: manual, time, distance, calories.

1.11 BODY TESTER （ FAT ）

After switching on treadmill, press “ PROGRAM” repeatedly until window displays “FAT”

Press “MODE” to enter (F1 SEX, F2 AGE, F3 HEIGHT, F4 WEIGHT). Press “SPEED+”,

“SPEED-” to set. After above data entry, computer will display F5 and please grasp hand pulse pads for a few seconds and window will display your body quality index.

11

Body quality index is based on calculation between average height and weight. It can be used in weight control programs together with other body quality index

The ideal FAT should be between 20-25, if under 19, it means too thin. If between 25 and 29, it means overweight, if over 30, it means obese. (The Index is a loose definition and should only be treated as reference, not for medical purpose)

01 Sex 01 Male 02 Female

02 Age 10------99

03 Height 100----200 cm

04 Weight 20-----150

05 FAT ≤19 Under weight

FAT = (20---25) Normal weight

FAT = (25---29) Over weight

FAT ≥30 Obesity

1.12 User Program

Besides 15 pre-set programs, there are 3 user-defined programs:U1,U2 and U3. Each user program has 20 segments. The user can set the desired speed and incline .Press

"PROGRAM" button to choose U1 ,U2 or U3, press "MODE" button to enter setting condition, then set the time of the first segment. Press "SPEED+" and "SPEED-" to set speed. Press” INCLINE+” and “INCLINE-“ to set incline. Press "MODE" button and your choice will be set. The next workout segment will flash, go through the same setup as you complete segment one. You must complete all 20 segments and then your user program is ready to use. Press “STOP” key to return to last segment setting any time.

1.13 Heart rate control (HRC) program

It is recommended that you use a heart rate chest belt (transmitter) when using HRC

Programs; hand pulse pads may not be reliable for HRC programs

There are 3 HRC programs. HR1 ， ， 220-AGE × 60%(70% / 80%).The parameter data setting order is 『 TIME 』 → 『 AGE 』 → 『 THR 』， You can adjust the data by pressing

Speed+/- Key or Incline +/-Key, then press Mode key for confirmation.

12

13

If 『 HR<THR-15 』 pulse automatically in every 15secs,SPEED automatically increase by 0.8KM every step ， INCLINE automatically increase by1 level every step until the data reached the max..

If 『 THR-5 > HR≥ THR-15 』 ,then SPEED and I NCLINE will adjust itself to make your pulse close to the default pulse automatically in every 15secs,SPEED automatically increase by 0.4KM and INCLINE automatically increase by1 level until the data reached the max..

If 『 THR+5 ≥ HR≥ THR-5 』 ,then SPEED and INCLINE will not change

If 『 THR+15≥HR ＞ THR+5 』 , then SPEED and INCLINE adjust itself to make your pulse close to the default pulse automatically in every 15 secs, SPEED automatically decrease by 0.4K and INCLINE automatically decrease by1 level until the data reached the min..

If 『 HR ＞ THR+15 』 , then each 15secs SPEED and INCLINE adjust itself to make your pulse close to the default pulse automatically in every 15 secs, SPEED automatically decreased by 0.8KM and

INCLINE automatically decrease by 2 level until the data reached the min. .

1.14 Assembly USB-Bluetooth App (Additional feature can be purchased separately.)

1.14.1 Route Key USB slot on the console ca not be used to charge a smartphone or tablet; it would only work with the specific Bluetooth App Dual Kit.

(WARNING: voltage of dual kit is 3.3v, so it should never be plugged into a PC or laptop as a normal

USB thumb drive, or it will be damaged permanently!)

1.14.2

Take out the Bluetooth Kit and push the cover down to let USB slot appears.

1.14.3

Then plug the Bluetooth Dual Kit into the Route Key Slot on treadmill console.

1.15 USB-Bluetooth App Operating Procedures

1.15.1

When the USB-Bluetooth App is connected to the console, Bluetooth light will be turned on if working successfully.

1.15.2

When it is connected, user can choose to use or not to use the app to control the setting of treadmill.

1.15.2-1 If choosing not to use, user can simply follow the standard operation of the treadmill.

1.15.2-2 If choosing to use the app to do control, user has to connect the Bluetooth Kit with smartphone or tablet. If it’s connected successfully, treadmill screen will show up “BTH”.

1.15.3

When the connecting is completed, user can use smartphone or tablet through the app to control the treadmill.

1.15.3-1 If the treadmill is still running when the user tries to connect the Bluetooth App, treadmill will stop and then enter the app controlling stage.

14

1.15.3-2 If the Bluetooth connection does not work out, disconnect other Bluetooth connection on your smartphone/tablet and try to pair it again. If it still fails, return the Dual Kit to store for testing and swap-over.

15

1.16 OTHERS

1.16.1

The system will enter into power saving mode automatically if there is no mat movement in 10 minutes under IDLE MODE. Display will shut down and backlit windows will switch off on the computer. Press any key to resume.

1.16.2 Countdown time, countdown calorie and countdown distance, you can only choose one of them at any time. While one window will show countdown time, distance or calorie, all other windows will display accumulated data as normal.

1.16.3 MP3 audio function: Insert MP3 cable in the input hole on the right side in the computer panel.

Note that music signals from MP3 and speaker may interfere with HR transmitter and receiver and make HRC program mal-function or in-accurate.

16

Getting started guide

PREPARE

I f you are over 35 years old, or have health problems, or this is your first time to do fitness exercise, please consult doctor or professional before use this machine. If you’re unsure of intensity and exercise time, please consult professional for advice.

Before you get onto the treadmill, please stand on solid ground to learn how to operate, such as start, stop and speed adjustment. After you familiar yourself with all the buttons and their respond time, stand on the foot rail on side of treadmill frame, hold onto handrails and start with 1.6--3.2 km/h low speed, stand straight, look forward, and adjust your pace to follow the speed of running belt, not faster not slower. After adapting well, you can then adjust speed to 3--5 km/h and further. Please allow some time for motor to pick up speed and do not set treadmill to any speed you’re not familiar with or comfortable with.

EXERCISE

1 km casual walking takes about 15-25 minutes. Walk 1km by 4.8 km/h needs about 12 minutes. If you can do it easily for a few times, then adjust to higher speed and/or incline, and extend to walk/run for upto 30 minutes, you will have a good workout. For your health concern, do not over exercise.

AMOUNT OF EXERCISE

SHORTCUT ——One recommended way is to do 15-20 minutes exercise.

Warm up for 2 minutes by 4.8 km/h, and adjust speed to 5.3 km/h and 5.8 km/h, continue to walk by these two speeds. Then add 0.3 km/h per 2mins speed increase, until you feel your heart beats quickly but you’re not losing breathe. Keep the speed for 10-15 minutes. If feel uncomfortable, reduce speed by 0.3 km/h at a time. Leave 4 minutes for cool down at end of run. If you fell it is hard to intensify exercises by increasing speed, you can also choose to increase incline slowly. Some users may find it more effective.

Fat burn —— This exercise may help you burn a lot calorie

Warm up 5 minutes by 4--4.8 km/h, add 0.3 km/h per 2 minutes, you can do 45mins on a speed that you feel comfortable yet carries some challenge. At last keep 4 minutes for cool down.

EXERCISE FREQUENCY

Target 3--5 times per week and 15-60mins each time. It is better to make a plan and stick to it. You can get the work-out you need by adjusting speed and incline and time of exercise.

SAFETY EXERCISE

Please consult professional staff before exercise, which can help recommend or draft exercise programs according to your age and health condition. When running, if you feel chest tightness or chest pain, irregular heartbeat, short of breathe, dizziness or anything uncomfortable, please stop exercise immediately! Seek medical advice if symptoms persist long after stop exercise.

Below setting is for your reference:

Speed 1-3.0 km lack of exercise user or under health conditions

Speed 3.0-4.5 km not regular exerciser

Speed 4.5-6.0 km walker, low intensity

Speed 6.0-7.5 km fast walker, high intensity

Speed 7.5-9.0 km jogging

Speed 9.0-12.0 km intermediate speed runner

More than 12.0 km excellent runner, athletics

ATTENTION ： It is best for walker to choose speed less than or equal to 6 km, recommend exercise for longer hours with less intensity

17

18

Warm-up Exercise

It is better to do some stretch exercise before running, this would help reduce chance of injury as well. Use 5-10 mins to warm-up. Follow below method and diagram to do stretch exercise for five repeats, and each foot for 10 seconds or more every repeat. After running, do those stretch exercises again.

1. Reach Down ： Knees slightly bent and body slowly bent forward, back and shoulders relax, try to touch toes. Keep

10-15 seconds and relax. Repeat 3 times (See picture l).

2. Hamstrings Stretch: Sitting on a clean cushion, put one leg straight, the other inward and close to the inside of the straight leg. Try to reach your toes with your hands. Keeping for 10 to

15 seconds, and relax. Repeat 3 times for each leg (See picture 2).

3. Crus and Feet Tendon Stretch: Standing with two hands on the wall or tree, one leg behind. Keeping your legs straight and heels on ground, tilt to the wall or tree. Keep 10 to 15 seconds, and relax. Repeat 3 times for each leg (See picture

3).

4. Quadriceps Stretch: Keeping your balance with your left hand holding on the wall or table, then stretch your right heel toward your buttocks slowly, until you feel very tense in the front of your thigh. Keep10 to 15 seconds, and relax. Repeat 3 times for each leg (See picture 4).

5. Sartorius (Inner Muscles of the Thigh Muscle Stretch:

Sitting down with your soles facing opposite and knees outward

Pull your feet toward your groin. Keep 10 to 15 seconds ， and relax. Repeat 3 times (See picture 5).

Maintenance Instruction

WARNING ： cleaning or maintenance, fail to do so may result in electric shock.

CLEANING ： Regular cleaning of the unit will greatly prolong the treadmill's life.

Keep treadmill clean by dusting regularly. Be sure to clean the exposed part of the deck on either side of the walking belt and also the side rails. This reduces the build up of foreign material underneath the walking belt. Make sure that shoes are clean. The top of the belt may be cleaned with a wet soapy cloth. Be careful to keep liquid away from inside the motorized treadmill frame or from underneath the belt.

Vacuuming ： Always unplug the treadmill from the electrical outlet before removing the motor cover. At least once a year remove the motor cover and vacuum under the motor cover.

Lubricating: This treadmill's walking belt and deck are equipped with a pre-lubricated, low maintenance deck system. The belt/ deck friction may play a major role in the functioning and life of your treadmill, thus requires periodic lubrication. We recommend an annual inspection of deck and running belt by a qualified technician.

We recommend lubrication of the deck according to the following timetable:

Light user (less than 3 hours/ week) Every 60 days

Medium user (3-5 hours/ week) Every 45 days

Heavy user (more than 5 hours/ week) Every 30 days

We suggest you buy lubricating oil with spray nozzle from local distributors or contact our company directly.

For any other maintains please call service professionals for help.

19

20

Belt Adjustment

Place treadmill on a level surface. Make treadmill run at approximately 6-8 km/h, observe the running belt deviate condition.

I f the belt is drifting to right, unplug safety lock and power switch, and turn the right adjusting bolt 1/4 turn clockwise, re-start treadmill and make it run at above speed, observe the running belt deviate condition for 1-2 minutes.

Repeat above steps until the running belt moves back to middle and remains centered.

See picture A

If the belt is drifting to left, unplug the safety lock, turn off power, then turn the left adjusting bolt clockwise by 1 / 4 laps. , a re-start treadmill and make it run at above speed, observe the running belt deviate condition for

1-2 minutes. Repeat above steps until the running belt moves back to middle and remains centered. See picture B

Treadmill belt will slightly stretch after a period of use, depends on the frequency it being used, user body weight and woven structure of the belt. If you often feel slippery, you can adjust both adjusting bolt clockwise rotation by 1 / 4 turn. Restart treadmill and stand on the belt to test tightness. If required, repeat the above step once until the belt reaches moderate tightness. If problem persists, call service for help-don’t risk over stretch the belt.

See picture C

21

Exploded drawing

No.

B1

B1-1

B1-2

B1-3

B1-5

B2

B3

B4

B5

B6

B8

B9

B11L

B11R

B13

B15

B16L

B16R

B17

No.

A1

A2

A3L

A3R

A4

Parts list

No.

C1

22

C2

Description

Main frame

Base frame

Left upright

Right upright

Handrail bracket

Description

Console set

Overlay

Membrane key

Console iPad holder

Console panel

Protecting foam

Handrail plug

Console back cover 1

Transporting wheel cover

Flat feet pad

U-shape feet pad

Left side cover

Right side cover

Motor upper cover

Side rail

Left end cap

Right end cap

Adjusting wheel

Description

DC motor

Running belt

A. Welding parts

Qty No. Description Qty

1

1

1

A5

A7

A11

A13 1

1

B. Plastic parts

Qty No.

Incline bracket

Deck supporting tube

Motor frame

Running belt fixing bracket

Description Qty

1

1

1

1

1

1

4

1

1

2

1

2

1

1

2

4

1

2

2

B20

B21

B22

B23

B26

B27

B30L

B30R

Round plug

Squared plug

Left motor side cover

Right motor side cover

Deck cushion

Cushion set

Left anti-slippery pad

Right anti-slippery pad

B31 Rubber pad 2

B34 EVA pad (for iPad holder) 1

B43 PVC cushion 2

1

4

1

1

1

1

2

4

B44

B45

B49

B58

EVA pad

Console back cover 2

Bottle holder

Handrail cover 1

B59

B65L

Handrail cover 2

Left console side cover

B65R Right console side cover

B81 USB rubber cover

2

1

1

1

2

2

1

1

C. Electric parts

Qty No. Description Qty

1

1

1

2

1

1

C15

C16

Power cable

Upper wire

1

1

Rear roller

Front roller

Running deck

Cylinder

Drive belt

C3

C4

C5

C6

C7

1

1

1

1

1

C17

C19

C20

C23

C27

C8 Power switch

C9

C10 Quick buttons on left handrail 1

C11 Quick buttons on right handrail 1

C12

Controller

Incline motor 1

1

1

C13

C14

Safety key

Single cord (red)

C28

C29

C31

C32

C33

1 C34

1 C37

D. Hardware

No. Description

D1

D2

D4

D5

D6

D8

Screw driver 13-15-17

Allen wrench T6

Round head hex bolt M10X65

Round head hex bolt M8X100

Round head hex bolt M8X50

Round head hex bolt M10X15

D10 Round head hex bolt M10X45

Qty

2

4

2

1

1

1

2

D11 Round head hex bolt M10X50

D12 Round head hex bolt M10X55

D14

D15

D16

D18

D20

D21

D23

Round head hex bolt M8X30

Round head hex bolt M8X40

Round head hex bolt M8X45

Nylon nut M10

Nylon nut M8

Flat washer M10

Flat washer M8

D24 Spring washer M5

D25 Spring washer M8

23

D28 Hex head round bolt M10X20

1

6

1

2

1

3

8

17

19

2

4

2

Lower wire

MP3 cable

Magnetic ring

Overload protector

Single cord (black)

Speed sensor

Han pulse sensor

Short single cord (red)

Short single cord (black)

Grounding cable

3-pin outlet

Chest belt

No. Description Qty

D26 Arc washer 6

D31 Hex head round bolt M8X20 4

D33 Hex head round bolt M8X55 1

D34 Hex head round bolt M8X60 2

D36

D39

D41

D44

D45

D46

D48

D50

D51

D52

D57

D58

D59

D62

Cross head bolt M6X25

Cross head bolt M6X40

Cross head self-tapping bolt

4.2X70

Cross head bolt M5X12, washer

Cross head bolt M5X15, washer

Cross head bolt M5X20, washer

Cross head self-tapping bolt

ST4.2X19, washer

Cross head self-tapping bolt

ST4.2X25, washer

Cross head bolt M5X8

Cross head self-tapping bolt

ST4.2X16

Cross head self-tapping bolt

ST4.2X25

Cross head self-tapping bolt

ST3.5X16

Cross head self-tapping bolt

ST2.9X25

Incline rotating tube

4

4

4

1

5

2

12

2

4

34

4

4

4

2

D69 Round head hex bolt M8X55 2

1

2

1

1

1

1

1

2

1

1

1

1

Error code and trouble shooting

24

Error Code

__

E1

E2

E3

E6

Console shows up as “Blank”

Fault Symptoms and Trouble shooting

Communication abnormal:

The controller and console has abnormal communication

1. Check the connecting wire between console and controller if connection is good.

2. When wire is in good condition, change the controller to see if problem solved.

3. When wire is in good condition, change the console to see if problem solved.

Motor doesn’t connect well.

1. Check if motor wire connects ell, and try to re-connect.

2. Check if there is un-usual smell, and change the controller to see if problem solved.

Current overload protection:

When current exceeds the set value, system shows E3 to protect the motor, or when a certain part of treadmill got stuck, motor cannot run so that the current overloads and system’s self protection turns on.

1. Check the condition of treadmill and re-turn on the power of treadmill.

2. Check if motor has any sound of current overload or any burnt smell when operating. If so, change the motor to see if problem solved.

3. Check if there’s any burnt smell from controller. If so, change controller.

4. Check if voltage fits the standard or under required voltage. Try to use it under correct voltage range.

Rush protection

1. Check if there is an un-usual smell. If so, change the controller to see if problem solved.

Console cannot defect the signal of safety key

1. Check if safety key is in good condition, or if wire connects well, or the magnet is put in the correct place.

2. When above methods do not work, change safety key to see if problem solved.

1. Check if power cable connects well.

2. Check if power switch is on.

3. Check if fuse is burnt down.

4. Check if wire connecting well console and controller is in good condition or connects well.

5. When above methods do not work, change console to see if problem solved.