advertisement
LT2021
1. Connection
Connect the antenna lead or CATV cable or external equipments(such as Antenna, Cable
TV, VCR, DVD, Set top box, etc.) to the corresponding terminals or interface on the TV rear (please refer to the users manual of the equipment to be connected as well) and confirm that the signal source is available and works normally.
REAR REAR
Audio input
(for AV1)
Audio output
Audio output
Audio input
(for component)
Composite
Video input
Super
Video input
Audio input
(for AV2or
S-Video)
Component IN
Component
Video input
2. The remote control
Open the back battery cover of the remote control and install two AAA size batteries and then close the battery cover on to the remote control.
POWER: Power On/Off.
POWER
DISPLAY
MUTE
MUTE: Temporarily interrupt the sound
or restore it.
0~9/100 Digit buttons: To select a
TV channel.
CH: Press or to adjust channel.
VOL: Press + or - to adjust the volume.
PC: Not Supported.
SLEEP: To set sleep timer.
CH
+
VOL
-
PC
7
100
1
4
2 3
5 6
8 9
PRE-CH
0
TV/VIDEO
DISPLAY: Press this button to display Channel.
PRE-CH: To display the previously selected
TV channel.
TV/VIDEO: Select your input source: press
repeatedly to select source.
MENU: Press repeatedly to display
OSD menu.
SLEEP
MENU
MTS/SAP
MTS /SAP: Press this key to activate
Multichannel Television Sound,
Stereo or Mono sound.
V-CHIP: Press this button to setup
parental control.
V-CHIP CAPTION
CAPTION : Press this button to turn Closed
Caption on.
PIP POP SWAP SIZE
PIP: Not Supported.
SWAP : Not Supported.
POP: Not Supported.
SIZE: Not Supported.
1)Connect the TV to power outlet, the power indicator will display blue. Press the power switch or
the button on the remote control to turn on the TV, the power indicator will display orange.
2)Press the power switch or the button on the remote control to turn off the TV.
Press the TV/AV button to select TV or AV mode.
You can select the signal receiving method according to the following steps:
1)Press the MENU button,press or button to item SET UP and
press or into SET UP menu.
2)Press the or button to select the item AIR/CABLE .
SETUP
BLUE SCREEN
LANGUAGE
AIR/CABLE
3)Press the or to change the item between Air and Cable .
CH SEARCH
CH DEL. /ADD
VIEW MODE
RESET
1)Press the MENU button, press or button to item SET UP and
press or into SET UP menu.
2)Press the or button to select the item CH SEARCH .
3)Press the or to start to CH SEARCH programs.
SELECT
OFF
ENGLISH
CATV
1
ENTER EXIT
MENU
1)Press the MENU button, press or button to item VIDEO ADJUST
and press or into VIDEO ADJUST
3)Press the or to adjust the level.
menu.
2)Press the or to select the item you want to adjust.
VIDEO ADJUST
CONTRAST
BRIGHTNESS
SATURATION
TINT
BLACK LEVEL
SHARPNESS
RESET
SELECT ENTER
8 0
5 0
6 0
5 0
1 0 0
0
EXIT
MENU
1)Press the MENU button, press or button to item AUDIO ADJUST
and press or into AUDIO ADJUST menu.
2)Press the or to select the item you want to adjust.
3)Press the or to adjust the level.
AUDIO ADJUST
VOLUME
BASS
TREBLE
W HEAD PHONE
SRS
SELECT
6 0
5 0
5 0
OFF
OFF
ENTER EXIT MENU
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement