- Computers & electronics
- Computer cables
- Cable interface/gender adapters
- Addonics Technologies
- ADU3ESA
- User Guide
advertisement
T E C H N O L O G I E S
User Guide
USB 3.0 to eSATAp Adapter
(ADU3ESA)
www.addonics.com
v3.1.11
Technical Support
If you need any assistance to get your unit functioning properly, please have your product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/
To any Computer/System USB3.0/2.0 Port
Drive Activity LED
Power LED eSATAp (Hybrid eSATA) port for connecting eSATA or eSATAp storage device
(Optional) USB Extension Cable to Computer/System
Type of USB Port:
USB 3.0 - Green Power LED
USB 2.0 - Orange Power LED
Drive Activity LED:
Blinking red color if there is drive activity on the eSATA storage device connected to the USB3.0 to eSATAp adapter.
Note: The USB3.0 to eSATAp adapter is compatible with hardware port multipliers where the hard drives are configured as a single raid volume. The current firmware of the USB3.0 to eSATAp adapter also supports individual hard drive mode when connected to the Addonics HPM-XA. In this mode, the system sees a single USB device with multiple drive letters. Removing any of the storage units (or drive letters) associated with the single USB device forces the USB to reset with the reduced number of drives. During the reset, any ongoing drive activities for other drives connecting to the USB 3.0 adapter will be terminated. So it’s important to make sure all drives are inactive before removing any device from the port multiplier connecting to the USB 3.0 - eSATAp adapter.
CONTACT US www.addonics.com
Phone:
Fax:
Email:
408-573-8580
408-573-8588 http://www.addonics.com/sales/query/
advertisement
Related manuals
advertisement