EYEZONE B1080P-1

User Manual

Oct 26, 07

34422F03

CONTENTS

1. Package Contents………………………………………….. 1

2. Introduction………………………………………………... 1

3. Features…………………………………………………… 2

4. Hardware Overview………………………………………... 3

5. Remote Control…………………………………………….. 4

5.1 Entering Text or IP Address………..…………………… 4

6. Start the B1080P-1…………………………………………. 5

7. Setting Up………………………………………………….. 6

7.1 Network Setup…………………………………………. 6

7.2 FTP Setup……………………………………………… 8

7.3 Video Setup…………………………………………….. 9

7.4 Other Setup…………………………………………….. 9

8. Using the B1080P-1………………………………………... 11

8.1 Play Media Files on the CF Card………………………. 11

8.2 Download Function……………………………………. 14

8.3 Play the Media Files on the PC………………………… 17

8.4 Download/ Upload Media Files………………………… 20

8.5 RS-232 Function……………………………………….. 23

9. Http Command Function………….……………………….. 24

9.1 Player Control………………….……………………….. 25

9.2 Network Setup………………………………………….. 26

9.3 Timer Setup…………………………………………….. 27

10. Optional Auxiliary Equipment……..……..……………….. 28

10.1 Play-Button Box (Eyezone BB)………..…………….. 28

10.2 Wireless Touch-Sensor Buttons…..……..…………….. 28

11. Troubleshooting……………………………………………. 30

1. PACKAGE CONTENTS

1.

B1080P-1

2.

Remote Control

3.

Audio Cable

4.

Y.Pb.Pr Cable

5.

S-Video Cable

6.

Power Adapter

7.

User Manual

2. INTRODUCTION

The Eyezone B1080P-1 is a digital media player that plays movies, music, digital picture and

WMV9 from CF memory card without a computer.

The Eyezone B1080P-1 supports High Definition movie hardware decode acceleration, presents for you the smoother and clearer picture, it supports high resolution video output such as 1080P / 1080i / 720P for movie theater quality video on a big screen. By connecting to

S-Video, Y.Pb.Pr, VGA (resolution up to 1360 x 768), HDMI (1920 x 1080P) and Audio, you can play picture, movie and music on any display device.

The Eyezone B1080P-1 can connect to a wired network at speed up to 100Mbps. This function provides you with maximum throughput for sharing and transferring digital media.

1 2

3. FEATURES

„ Supports multiple file formats ： Music, Picture, Movie and HD WMV9.

„ Supports S-Video, Y.Pb.Pr, HDMI, VGA and Audio output.

„ S-Video output supports Composite S-Video and Composite Y.Pb.Pr.

„ HD Y.Pb.Pr output supports resolution ：

NTSC Mode(60Hz) ： 480P/ 720P/ 1080i.

PAL Mode(50Hz) ： 576P/ 720P/ 1080i.

„ HDMI Output ： 480P/ 720P/ 1080i/ 1080P.

„ VGA output supports resolution ： 640x480/ 800x600/ 1024x768/ 1280x1024/ 1360x768.

„ Supports RS-232 port for computer control with ASCII command (play, stop, pause…etc).

„ Connect using an Ethernet network cable at up to 100Mbps.

„ The source of HD WMV9 MP@HL (Main Profile / High Level) supports resolution up to

1920x1080 (1080P) and the maximum bit rate is 12Mbps.

„ Supports CF memory cards. (Suggest using the high speed (150X) CF card)

„ Supports HTTP command function.

„ Supports Auto Key Lock function.

„

Exports the Configuration Value: You can export the configuration value to the CF card.

The configuration can be modified on your PC, and can be applied to the B1080PW-1 or others.

„ Compatible with Windows Media Player 11: Play media files stored in a network computer.

„ Supports FTP Auto Download Function: Connect to Remote FTP server and download data to the CF card automatically.

„ Supports Download Pause / Resume Function: Continue unfinished downloads upon next session.

„ Embedded FTP Server.

„ Supports NTP Network (G.M.T) Timer.

„ Supports Universal Plug and Play (UPnP) and DHCP.

„ Supports SLIDE SHOW Function

Normal Resolution: 1920 x 1080 (16:9), with the slide show interval of 5 sec.

Max Resolution: 4368 x 2912 (16:9), with the slide show interval of 10 sec.

4. HARDWARE OVERVIEW

„ Power Switch ： Toggle between main power on & off.

„ DC Input

： For the power adapter. (DC 12V / 1.5A)

„ VGA Connector ： Connects to devices that support VGA input. (LCD 、 projector)

„ Y.Pb.Pr Connector ： Connects to devices that support Y.Pb.Pr

input. (HDTV 、 projector)

„ HDMI Connector ： Connects to devices that support HDMI input.

„ RS-232 Connector ： Used for computer control with ASCII command.

„ RJ-45 Ethernet Connector ： Connects to router or PC by RJ-45 Cable.

„ Audio Connector ： Connects to sound input. (HDTV with amplified speaker)

„ S-Video Connector ： Connects to devices that support S-Video input. (HDTV 、 projector)

„ CF Card Socket

： For CF memory card.

„ “RESET” Button ： To restart the B1080P-1.

3 4

5. REMOTE CONTROL

7

8

5

6

3

4

1

2

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

Power on/ off

Select the output mode

Numeric Key

Delete last entry

Select a function or to play the selected file

Open the setup menu Mute sound

OSD display function on/ off

Auto-play function on/ off

Mute sound

Volume up/ down

Move the cursor

Confirm the selection/ entry

Go back one layer

Select the TV type (NTSC/ PAL)

Shuffle on & off

Play the file selected

View the previous/ next file

Play the previous/ next file if in playback

Select the repeat mode

Rewind/ forward movie or music files

Stop playback

Show the information of the file selected

Search video (movie) timeframe

Zoom in/ out on the movie or picture

Pause the playback or play frame by frame

5.1 ENTERING TEXT OR IP ADDRESS

„ Keys need to be pressed multiple times to enter the letter corresponding to that key.

For Example ： To enter the letter “a”. you would press the “2” button twice.

„ Enter The IP Address

For Example ： To enter the IP address”192.168.100.100”,.

Step 1 ： Press “1” once, then “1” is displayed, and the color of “1” is orange.

Step 2 ： When the color of “1”turns white, press “9” once, then “9” is displayed.

Step 3

： Repeat steps 1 and 2 to enter and complete the IP address.

6. START THE B1080P-1

„ Power On z Insert the CF memory card that has Picture, Music, Movie or WMV9 files. z Press the “POWER” button to power on the Eyezone B1080P-1, then press the “TV

MODE” button to select the output mode.

„ Status After Power On z Status 1 ： If the “AUTOPLAY (Movie or Picture)” function is enabled and there are movie or picture files in the CF card, the Eyezone B1080P-1 will auto play movie or picture files on the CF card after power on. z Status 2 ： If the “AUTOPLAY” function is disabled, after power on the main menu will appear as shown in the following figure. There are two groups in the main menu

(“/mnt/CF” and “SETUP”).

NOTE ： The pop-up window that shows the IP address will appear later, if DHCP mode is selected when the Eyezone B1080P-1 is turned on.

„

Power Off ： Press the “POWER” button again to power off.

5

7. SETTING UP

„ In the main menu, please using the “ ▼ ” button on remote control to select the “ SETUP ” item, then press the “ENTER” button. You will be presented with the Eyezone B1080P-1 settings screen.

„ You can also press the “ SETUP ” button on remote control to directly open the settings screen. (If there is file that is being play, please stop first.)

„ There are four groups of sub-menu in the main menu (“Network Setup”, “FTP Setup”,

“Video Setup” and “Other Setup”).

„ In the settings screen, you can use the “ ▲ 、 ▼ 、 、 ” buttons to select an item, and press the “ENTER” button to confirm the selection.

„ Press the “SETUP” button on remote control to save and quit the settings screen.

6

7.1 NETWORK SETUP

„ Network with

： Select your network connection Disable/ RJ45.

„ IP Assigned by DHCP ： If you have a DHCP-enabled router, please select “On”, then the router will automatically assigns an IP address to the Eyezone B1080P-1. If you don’t have a

DHCP –enabled router, select “Off” and type the network information in “ Assign IP

Address ”.

7.1 NETWORK SETUP (continued)

„ Assign IP Address ： If the Eyezone B1080P-1 is connected to a network without a DHCP server or you want to use Local FTP Server function, type the fixed IP address, Mask,

Gateway and DNS for the Eyezone B1080P-1.

PS. Refer to 5.1 for how to enter IP address by remote control.

NOTE ： Before setting the IP address, Mask, Gateway and DNS, check the network information of your PC. Please follow the steps below to get the network information of your PC.

Step 1 ： Click on “Start“ → “Run“ and type in ”command“, then press “ENTER”.

The MS-DOS window will appear, type in ” ipconfig “ and then press “ ENTER “

to get the network information.

Step 2 ： Assign IP Address, Mask (Subnet Mask) and Gateway (Default Gateway)

for the Eyezone B1080P-1.

Enter the same values of the Subnet Mask and Gateway, and be careful not to enter the values of IP address that are already used by other devices on the network.

„ Media Player 11 Server ： Enable/ disable the Media Player 11 server.

7 8

„ Local FTP Server ： Turn on/ off the Eyezone B1080P-1 server.

( If you use the Eyexone B1080P-1 server, please disable the DHCP function and input a fixed IP address, Mask, Gateway and DNS of the Eyezone B1080P-1.

)

„ Local FTP Server Setup ： To set the “Port”, “User ID” and “Password” of the Eyezone

B1080P-1.

(The Default Port ： 21, User ID ： root, Password ： admin)

„ FTP Auto Download ： Enable/ Disable the FTP auto download function.

„ Remote FTP Download Setup

- Server IP ： Type in the domain name of the FTP site or IP address as was given to you by

your Web hosting provider.

- Port ： The default port for FTP is 21. In most cases you should not change this number.

If the FTP site uses a port other than 21, you should enter the correct port.

- User ID

： Type the user name of the Remote FTP server.

- Password ： Type the Password of the Remote FTP server.

- FTP Path ： Enter the folder path that you want to share.

„ Network Timer NTP ： Set the NTP Server and Auto Download Time here.

1. It is recommended to use 204.152.184.72 as the IP address for the NTP server.

2. Time Zone must be set properly for the auto-download function.

„ Local HTTP Server ： Enable/ Disable the HTTP command function.

„ Local HTTP Server Setup ： To set the “Port”, “User ID” and “Password” of the Eyezone

B1080P-1. (The Default Port ： 80, User ID ： root, Password ： admin)

NOTE ： Press the “SETUP” button on the remote control to save the settings, and it will auto exit the settings screen, then restart the Eyezone B1080P-1.

7.3 VIDEO SETUP

„ NTSC Active Output ： Select the output mode. (HDMI/ SD Video/ VGA/ HD Y.Pb.Pr)

You can also press directly the “TV MODE” button on the remote control to select output mode.

„ HDMI ： Select the HDMI output resolution among 480i / 480p/ 720p / 1080i/ 1080p.

Select the “Auto EDID”, the Eyezone B1080P-1 will scan the display device connected and set the correct resolution automatically.

„ SD Video ： Select the SD output mode. (“Video/ S-Video” or “Y.Cb.Cr”)

„ VGA 60Hz ： Select the VGA output resolution.

(640*480 / 800*600/ 1024*768/ 1280*1024/ 1360*768)

„ HD Y.Pb.Pr 60Hz ： Select the Y.Pb.Pr output resolution among 480p / 720p / 1080i.

7.4 OTHER SETUP

„ TV Standard ： Select the output TV video format (NTSC / PAL).

„ Aspecl-ratio ： Select TV mode 4:3 or 16:9.

„ Play OSD Display ： Enable or disable the OSD display.

„ Auto Play

Movies ： Auto play movie files on the CF card after power on.

- Pictures ： Auto play picture files on the CF card after power on. (slideshow function)

- Off ： Turn off the Auto Play function.

„ Play Button ： Only for used with play buttons. The Eyezone B1080P-1 supports two options

(Repeat Default / Repeat All) when the demo file finishes playing.

„ SPDIF Out

： Supports Analog / DPCM audio output.

„ Speakers Out ： Supports 2 channel amplifier output.

„ Lock Remote Controller ： Enable/ disable the auto key lock function. (The B1080PW-1 will auto lock when there is no further input for 1 minute.)

9

7.4 OTHER SETUP (continued)

„ Lock Password Setup ： Press the “Enter” button to open the “Set Password” window. Enter the password with numeric buttons and press the “Enter” button to save the new password

(The default password: 123).

„

Export Setting File

： Press the “Enter” button to export the configuration value to the CF card. z Copy the file “HDPlayerSetting.txt” on CF card to your PC. Use the “Wordpad” to open the file, and you can see all the configuration value of B1080P-1. z You can modify directly the configuration value on your PC.

Example. [AutoPlay] Off Options:Movies,Pictures,Off

The “Auto Play” function is turned off, you can change directly the mode to Movies or

Pictures. z Copy the completed file “HDPlayerSetting.txt” from PC to CF card. Insert the CF card to the B1080P-1, the B1080P-1 will apply the new settings automatically.

10

8. USING THE B1080P-1

8.1 PLAY MEDIA FILES ON THE CF CARD

Step 1

： Insert the CF card with media files (picture, music, movie), then turn on the Eyezone

B1080P-1 and press the “ENTER” button on the remote control when “’mnt/CF” is

highlighted to take you into the CF card.

Step 2 ： Select the type of data (VIDEO/ AUDIO/ PICTURES) you want to play, and then press the “ENTER” button on remote control to take you into the “VIDEO LIBRARY”,

“AUDIO LIBRARY” or “PICTURE LIBRARY”.

RETURN

PS.

If the symbol (return) appears on the screen, you can use “ RETURN ” button of

the remote control to go back one layer.

Step 3 ： Select the file you want to play, and press “ENTER” or “PLAY” button on the remote control to play the file.

VIDEO LIBRARY AUDIO LIBRARY PICTURE LIBRARY

11

8.1.1 Using the Remote Control When Media File Is Playing

„ SETUP ： Press the button to adjust the brightness, contrast or saturation while the movie or picture is playing. With the “+ VOLUME –” button.

- First Press ： Adjust the brightness.

- Second Press ： Adjust the contrast.

- Third Press

： Adjust the saturation.

Brightness Contrast Saturation

„ MUTE ： Mute the sound while the movie or music is playing.

„ + VOLUME ： Increase/ decrease the volume while the movie or music is playing.

„ SHUFFLE ： Turn on/ off the shuffle function.

„

PREV / NEXT

： Play the previous/ next file.

„ REPEAT ： Select the repeat mode.

„ REV / FWD ： Rewind/ forward movie or music file.

„ STOP ： Stop playing, and go back one layer.

„ INFO ： Display the file information.

File Information

„ SERACH ： Search video (movie) timeframe

Press the “SEARCH” button, and enter the initial time that you want to start at, then press the

“ENTER” button to play.

12

„ PAUSE/STEP ： Pause the playback or play frame by frame.

„ ZOOM ： Zoom in/ out on the movie or picture.

Original Size First Press ： ZOOM 01

Second Press ： ZOOM 02 Third Press ： ZOOM 03

13

8.2 DOWNLOAD FUNCTION

Before it downloading files from the FTP server, Eyezone B1080P-1 will delete all contents on CF card except the file on the CF card and the FTP server are the same.

8.2.1 Manual Download Function

„ Please confirm that the Eyezone B1080P-1 is already connected to the network. (Refer to 7.1

Network Setup)

„ Please use the “▼＂ button to select the “DOWNLOAD” item, and press “ENTER” button.

The Eyezone B1080P-1 will connect to the FTP server and download files automatically.

„ Before download files, Eyezone B1080P-1 will delete all contents on CF card first.

„ The pop-up window that shows the status of download and the screen saver will appear while the Eyezone B1080P-1 is downloading files. After finishing downloading files, the Eyezone

B1080P-1 will display the files automatically.

Screen Saver

8.2.2 Auto Download Function

„ If there are more than one Eyezone B1080P-1 is, you can use ftp tools to divide them into different regional group.

14

For example.

- Use the ftp tool “ Serv-U ” to divide into three groups, and setup the “User name”, “Password” and

“FTP port number” of three groups for login ftp server.

Group 1

： User name ： ipmedia Password ： 0000 FTP port number ： 21

Group 2 ： User name ： ipmedia2 Password ： 1111 FTP port number ： 21

Group 3 ： User name ： ipmedia3 Password ： 2222 FTP port number ： 21

8.2.3 Download Pause / Resume

Eyezone B1080P-1 supports download pause/resume. You can press the “STOP” button to pause downloading media files. The Eyezone B1080P-1 can continue unfinished downloads upon next session.

FTP tool ： Serv-U Setup “User name”, “Password” and “FTP port number”

- Enter the “ Remote FTP Download Setup” window of Eyezone B1080P-1, and then type the same “User name (User ID)”, “Password” and “Port”.

The Eyezone B1080P-1 in group 1, please type the “User ID ： ipmedia”, “Password ： 0000” and

“Port ： 21”.

- Please enter the “ Network Timer NTP ” window of Eyezone B1080P-1, and set up the “ Download

Time ”, then the Eyezone B1080P-1 will download all the files from the FTP server at the designated time.

NOTE ： The filename of the media files in FTP server cannot have any spaces.

15

NOTE ： If the network connection is unstable or broken, a pop-up window will appear as shown below. The Eyezone B1080P-1 will attempt to resume downloading in 2 minutes. The user can terminate the download by pressing the “RETURN” button.

16

8.3 PLAY THE MEDIA FILES ON THE PC

„ Using Windows Media Player Version 11 ( Windows XP/ Vista only )

Step 1

： Please download and install Windows Media Player Version 11 on your PC first.

Step 2 ： Launch the Windows Media Player Version 11 and the window below will appear.

Step 3 ： Click the “Library” tab, and then click “Add to Library”.

Step 4 ： Click “Add” and select the folder containing the media files you want to share, then click

“OK”.

17 18

Step 5 ： Click the “Library” tab, and then click “Media Sharing”.

Step 6 ： Select the “Share my media”, and click “OK”.

Step 7 ： In the Media Sharing dialog box, select the “Share my media” check box.

Step 8 ： Confirm that the Eyezone B1080P-1 is connected to the network.

In the list of devices below the “Share my media to” check box, select the device ( Eyezone

B1080P-1), and click “Allow” to share the media files.

Step 9 ： The shared folder will appear on the screen of the Eyezone B1080P-1. Select the

folder and click the “ENTER” button on remote control to go into the folder.

Step 10 ： Please select the type of data (VIDEO/ AUDIO/ PICTURES) you want to play, and then

press the “ENTER” button on remote control.

19

Step 11 ： Select the file you want to play, and press “ENTER” or “PLAY” button on the remote control to play the file.

NOTE ： If the media files shared from PC are not listed on screen, restart your PC.

8.4 DOWNLOAD / UPLOAD MEDIA FILES

Method 1 ： Connect by IE Browser

Step 1

： Confirm the “ IP Assigned by DHCP” has been disabled, then enter the “ Eyezone Network

Setup ” item, and type IP Address (example. 192.168.1.100), Mask and Gateway for the Eyezone

B1080P-1 (refer to 7.1).

Step 2 ： Confirm the “ Local FTP Server ” function has been enabled (refer to 7.1).

20

Step 3 ： Please setup your router or firewall, and open a port 21 for the Eyezone B1080P-1.

The following figure is an example, please refer to your user’s manual of router for opening ports.

Step 4 ： Start IE on PC and type the FTP site or IP ：

In the local PC, please type “ ftp://192.168.1.100”.

In the remote PC, please type “ ftp://61.30.13.40:21”.

Step 5 ： Then type the “User Name” and “Password” and click “Log On” to log on to the

Eyezone B1080P-1 Server. (Default User Name ： root Default Password ： admin)

Step 6 ： After logging on, all the media files in the CF card on the Eyezone B1080P-1 will be

listed. You can download and upload the media files between CF card and your PC.

NOTE ： After file being download/ upload will stop playing. After downloading files, the Eyezone

B1080P-1 will display the movie files automatically.

21

Method 2

：

Connect by FTP Tools

For example.

- If there are multiple Eyezone B1080P-1, you can use the “ CuteFTP ” tool to connect and manage files easily.

CuteFTP

- You can create all the Eyezone B1080P-1, and only select the Eyezone B1080P-1 that you want to connect in the list.

- Select the files you want upload to the Eyezone B1080P-1, or download the files to your PC.

NOTE ： After file being download/ upload will stop playing. After downloading files, the Eyezone

B1080P-1 will display the movie files automatically.

22

8.5 RS-232 FUNCTION (RS-232 cable is optional)

Use the tool “Hyper Terminal” or other tools to control the Eyezone B1080P-1 with ASCII command.

„

Keyboard Layout q ： POWER ： VOL - w ： SLOW

R ： RETURN * ： MUTE > ： NEXT

!

：

REPEAT S

：

SELECT <

：

PREW

~ ： SETUP A ： Auto Download u ： UP

# ： TV MODE p ： PLAY d ： DOWN

% ： AutoPlay P ： PAUSE/STEP l ： LEFT i ： INFO x ： STOP r ： RIGHT m ： NTSC/PAL f ： FFW s ： ENTER

$ ： SEARCH b ： REW C ： CLEAR

+ ： VOL +

(XXXXX.XXX) ： Play The File (xxxxx.xxx is the file name)

NOTE ： Must include the round brackets.

„

Pin Assignment

D Sub 9Pin Female

Pin 1

Pin 2

Pin 3

Pin 4

Pin 5

Pin 6

Pin 7

Pin 8

Pin 9

D Sub 9Pin Female

Pin 4

Pin 3

Pin 2

Pin 1

Pin 5

Pin 6

Pin 8

Pin 7

Pin 9

23 24

9. HTTP COMMAND FUNCTION

„ Confirm that the Eyezone B1080P-1 is already connected to the network. (Refer to 7.1)

„ Confirm the “ Local HTTP Server ” function has been enabled, and the “ Local HTTP Server

Setup ” set has been completed (refer to 7.2).

„ Set your router or firewall, and open a port 80 for the Eyezone B1080P-1. The following figure is an example, please refer to your user’s manual of router for opening ports.

„ Start IE on PC and type the HTTP site or IP ：

In the local PC, please type “http://192.168.1.100”.

In the remote PC, please type “http://61.30.13.40:80”.

„ Type the “User Name”, “Password” and click “OK” to log on.

(Default User Name: root

Default Password: admin)

„ There are three items: “Player Control”, “Network Setup” and “Timer Setup” in the window.

9.1 PLAYER CONTROL

„ Check State: Check the current state of B1080P-1.

„ Playback Control: Control the B1080P-1 to play file/ stop playback/ pause the playback/ play the previous file/ play the next file/ rewind movie/ forward movie.

„ Play File: Enter the file name that you want play, and click “Send” to play the file immediately.

„ Repeat File: Select the repeat mode.

„ Auto Download: Click “Send” to execute the auto download function immediately.

Note:

The “FTP Auto Download” function must be turned on and completed set.

„ Stop Auto Download: Click “Send” to stop the auto download function immediately.

„ Connect FTP Server: Click the FTP server address to connect to the B1080P-1, and enter the user name and password ( Default User Name: root, Default Password: admin) to log on.

„

After logging on all the media files in the CF card on the Eyezone B1080P-1 will be listed. You can download and upload the media files between CF card and your PC.

„ Volume Control: Enter the value for volume (0-30).

„ Auto Play: Select the auto play mode (movies/ pictures/ off).

Reboot System: Click “Send” to reboot the B1080P-1 immediately.

25

9.2 NETWORK SETUP

„ Network Interface: Select your network connection Disable/ RJ45 (Wi-Fi function only for

B1080PW) .

„ DHCP: Enable/ Disable the DHCP function.

„ IP Address: Enter the fixed IP address, Mask, Gateway and DNS for the Eyezone B1080P-1.

„ FTP Server: Enable/ Disable the FTP Server function. You can also change the User ID,

Password and port of the FTP Server.

„ HTTP Server: Enable/ Disable the HTTP Server function. You can also change the User ID,

Password and port of the HTTP Server.

„ Media Player 11: Enable/ disable the Media Player 11 server.

„ The

“WiFi Encryption Mode”

and

“WiFi SSID”

items only for B1080PW.

„ Reboot System: After setting, click “Send” to reboot the B1080PW-1.

26

9.3 TIMER SETUP

10. OPTIONAL AUXILIARY EQUIPMENT

10.1 PLAY-BUTTON BOX (Eyezone BB)

„ The Play Button Box (Eyezone BB) supports up to 12 play-button inputs.

„ Press one of the play buttons to play the corresponding file.

„ Hardware Connection

„ NTP Server: Set the NTP Server.

„ Auto Download: Set the auto download time.

„

Remote FTP: Set the Remote FTP Server.

„ Reboot System: After setting, click “Send” to reboot the B1080PW-1.

27

„ Play the Media File By the Play-Button ex. 5 Play-Buttons (supports up to 12 play buttons)

Step 1

： Put 6 demo files on CF card. ( 1 default file and 5 demo files )

NOTE ： The files are sorted by filename in ascending order alphanumerically (numbers < lowercase letter < upper case letters). Each button is mapped to a file by this order.

For Example ：

There are 6 demo files on the CF card. The file names are a01.xxx

, 33.xxx

, b55.xxx

, 1abc.xxx

,

07.xxx

and A01.xxx

. ( xxx is extension of the file )

Default File ： 07.xxx Demo File 1 ： 1abc.xxx Demo File 2 ： 33.xxx

Demo File 3 ： a01.xxx Demo File 4 ： b55.xxx Demo File 5 ： A01.xxx

Step 2 ： Insert the CF card to the Eyezone B1080P-1, and the Eyezone B1080P-1 will play the default file automatically while powered on.

Step 3

： Press one of the buttons 1-5 to play the corresponding demo file.

Step 4 ： The Eyezone B1080P-1 supports two options (Repeat Default / Repeat All) when the demo file finishes playing. The functions can be set in the setup menu. (Other Setup → Play Button)

- Repeat Default ： Eyezone B1080P-1 will automatically play the default file when the demo

file finishes playing.

- Repeat All

： Eyezone B1080P-1 will automatically play all the demo files when the demo file finishes playing.

28

10.2 WIRELESS TOUCH-SENSOR BUTTONS

10.2.1 Features of the Wireless Touch-Sensor Buttons

„ The number of touch-sensor buttons can be customized to 12, 24 or 36 for OEM project.

„ Used with various operating environment (glass, plastics and acrylic material, except metal material), the thickness supports 3mm -5mm, and it can be customized to 5cm for OEM project.

10.2.2 Demo Files

Ex. Using the wireless 5 Touch-Sensor Buttons

„ Put 6 demo files on CF card. ( 1 default file and 5 demo files )

NOTE

： The files are sorted by filename in ascending order alphanumerically (numbers < lowercase letter < upper case letters). Each button is mapped to a file by this order.

For Example ：

There are 6 demo files on the CF card. The file names are a01.xxx

, 33.xxx

, b55.xxx

, 1abc.xxx

,

07.xxx

and A01.xxx

. ( xxx is extension of the file )

Default File ： 07.xxx Demo File 1 ： 1abc.xxx Demo File 2 ： 33.xxx

Demo File 3 ： a01.xxx Demo File 4 ： b55.xxx Demo File 5 ： A01.xxx

10.2.3 Wireless Touch-Sensor Buttons

„ Open the battery cover and set the batteries (AA size) as shown below. Please note that the polarity of the battery.

10.2.4 Play the Demo Files

Step 1 ： Insert the CF card to the Eyezone B1080P-1, and the Eyezone B1080P-1 will play the default file automatically while powered on.

Step 2 ： Press one of the wireless touch-sensor buttons 1-5 to play the corresponding demo file.

Step 3

： The Eyezone B1080P-1 supports two options (Repeat Default / Repeat All) when the demo file finishes playing. The functions can be set in the setup menu. (Other Setup → Play Button)

- Repeat Default ： Eyezone B1080P-1 will automatically play the default file when the demo

file finishes playing.

- Repeat All ： Eyezone B1080P-1 will automatically play all the demo files when the demo file finishes playing.

29

11. TROUBLESHOOTING

No Picture

No Response From the Remote Control

No sound

1. Check power cable and power switches.

2. Ensure the video cables are connected between the player and the

Eyezone B1080P-1.

3. Press the “TV MODE” button on the remote control to select the

correct output mode.

4. Make sure the file format on the CF card is correct.

5. Check if the display device is switched to correct video input source.

1. Ensure that there are 2 batteries (AAA size) in the remote

control and they are inserted the correctly.

2. Check for any barrier between the remote

control and the product.

1. Check if the mute function is on.

2. Check if the volume is set properly.

3. Check if audio cable has been connected correctly.

No Responding while pressing the wireless touch – sensor buttons

1. Confirm the polarity of the battery.

Network Not Working

1. Check your IP settings on the Network Setup page.

(refer to 7.1)

2. If using wired network, make sure the network cable is

plugged in on both the Eyezone B1080P-1 and your network hub.

30