Motorola 9505 User Manual

SATELLITE

SERIES

9505

PORTABLE

TELEPHONE

USER’S GUIDE

Options Menu Quick Reference

M

Phone Book

Personal Numbers

Show Services

1

Last Ten Calls

My Phone Number(s)

Fixed Dialing

1

One-Touch Dial Setting

Call Related Features

Show Battery Meter

1

Show Signal Strength

1

Pending Call Drop

1

Call Forwarding

1,3,5

Call Waiting

1,3,5

Call Barring

1,3,5

Call Meters

Show Call Timers

1

Set Audible Call Timers

1

Set In-Call Display

1

Lifetime Timer

1,4

Mode Selection

Satellite Always

Cellular Preferred

Cellular Always

Satellite Preferred

Network Selection

Register Now

1

Available Networks

3

Network Search

3

Find New Network

3

Messages Menu

Call Voicemail

Received Messages

1,3

Outgoing Messages

1

Message Editor

1

Message Settings

Note: Unmarked features are available in all modes.

1 Available from Satellite Mode only.

2 Available from TDMA/CDMA/AMPS Cellular Mode.

3 Available from GSM Cellular Mode.

4 Available in Extended Menu.

5 Network and subscription-dependent feature.

Phone Setup

Emergency Mapping

2

International Dialing Prefix

2

Change Number

2

System Scan

2

System Options

2

Adjust Ring Volume

Ring or Vibrate

Set Ringer Tone

Phone Lock

Activate IR Port

Require SIM Card PIN

Change SIM PIN2 Code

New Security Code

Extended Menus

Show Time and Date

1,4

Set Time and Date

1,4

Set Time Format

Language Selection

Lights

Select Keypad Tones

Phone Status

1,4

Satellite

Antenna Lock

Release Button

Cellular Cassette

Antenna

(if provided)

Signal Strength

Indicator

Volume

Control

Keys

Display and

Status Indicators

Message Key

Status

Indicator

Satellite

Antenna

Earpiece

Real-Time

Clock

Battery Charge

Indicator

Display

Alphanumeric

Keypad

Battery Compartment/

Cellular Cassette

Connector

Quick Access

Key

Headset Jack

Infra-Red

Data Port

Accessory and

Power Connector

Microphone

SATELLITE MODE HELPFUL HINTS

• Need clear view of sky, outdoors, away from buildings and tall structures.

Rotate and fully extend antenna into a vertical position.

• Wait until registration is complete (you will see A

Registered and the

+ and n

indicators). If no registration ( n

missing), press

E 8

.

• To dial, press: [

0 0

] or [

0

and hold for two seconds], [country code],

[phone number],

O

.

• Talk with antenna above your head and vertical to the ground.

✁

Getting Started

1. Rotate and extend

the antenna.

2. Remove battery door.

(Top)

(Top)

3. Insert the SIM card.

4. Push down and slide the

SIM card tray to the right.

5. Remove battery’s

protective cover.

6. Install the battery by

matching arrows on phone

and battery.

7. Attach battery door

cover or optional

Cellular Cassette.

(Top)

8. Attach charging device.

9505 PORTABLE QUICK REFERENCE

Basic Operation

Turn the phone's power on/off:

Press and hold

S

.

Place a call:

Rotate and extend the antenna in a vertical position. To dial, press: [

0 0

[phone number],

] or [

.

0

and hold for two seconds], [country code],

Answer a call (with antenna rotated and extended):

Phone rings and/or vibrates

After Call followed by Answer?

is in display, press

O

Answer a call (with antenna stowed):

.

Phone chirps

Rotate and extend antenna

Phone will ring and/or vibrate

After Call followed by Answer?

is in display, press

O

.

End a call:

Press

C

.

Special Features

Adjust earpiece volume:

Press upper and lower volume keys on the side of the phone.

Adjust ringer volume:

Press

E and then the upper and lower volume keys on the side of the phone.

Clear the last digit in the display or exit a submenu:

Press

C

.

Clear the entire display or exit the menu system:

Press and hold

C

.

Select prompt language:

Press and hold

C

to return to idle display.

Press

M 2 6 O

to go to the language selection submenu.

Press

M

until you see the preferred language.

Press

O

to select.

Special Features Continued

Keypad disable:

Press

* and

# keys simultaneously to prevent accidental usage of the phone. All keys with the exception of the

S

key will be disabled. You can still answer an incoming call by pressing

To remove the keypad disable, press

*

O

and when the keypad is locked.

# simultaneously.

Display your phone number:

Press

Q #

.

Also refer to the “View Your SIM Card Phone Number(s)” section of the

User’s Guide.

Switch modes:

1. Press

M

until you see Mode Selection , and then press

O

.

2. Press

M

to scroll to Cellular Preferred , Satellite

Preferred ,

3. Press

O

to select.

or Satellite Always.

Quick Access Menu

Factory default for satellite and cellular mode.

E

1

2

3

4

5

Find Name

Mute

Call Voicemail

Battery Meter

Lock Now

6

7

8

9

Vibrate On/Off

Read Messages

Register Now

Forward On/Off

Phone Book

Recall a number from the phone book:

1. Press

Q

.

2. Enter the one-, two-, or three-digit location number of the entry, and then press

3. Press

O

.

O

to call the displayed entry.

Recall last ten numbers dialed:

1. Press

M until you see Phone Book , and then press

O

.

2. Press

M to scroll to Last Ten Calls , and then press

O

to select.

3. Press

M

to scroll to Last Calls Made and then press

O

to select .

4. Press

M

to scroll to the number you are looking for.

5. Press

O

to place a call to that number.

Welcome

The future of global telecommunications was established by Motorola with the introduction of our first satellite phone, the 9500 for the Iridium satellite system in 1998.

Consistent with Motorola’s history of providing constant product enhancement, Motorola proudly introduces our next generation Satellite

Series

TM

9505 portable phone for the Iridium system.

Our new 9505 product represents a significant advancement in Satellite phone technology being smaller in size, lower in power and having increased functionality over the 9500. As with all Motorola’s portable products, the 9505 has been designed and manufactured to our exacting standards to provide our customers with a rugged and reliable product.

The 9505 has passed our rigorous requirements for environmental performance including temperature, temperature shock, humidity, vibration, dust and other rigorous testing that ensures the phone you have purchased will meet the high performance standard you expect from a Motorola product.

Motorola wishes to thank you for selecting our 9505 product as your choice for global telecommunications.

Enjoy your new Satellite Series™ 9505 portable phone!

ii

Contents

Safety Information . . . . . . . . . . . . . . . . . . . . . . . . .7

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Guide Overview . . . . . . . . . . . . . . . . . . . . . . . . .12

Phone Overview . . . . . . . . . . . . . . . . . . . . . . . .13

Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Satellite Series™ Accessories . . . . . . . . . . . . .19

Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . .23

Attaching the Satellite Antenna . . . . . . . . . . . . .24

What Is a SIM Card? . . . . . . . . . . . . . . . . . . . . .25

Installing/Removing the SIM Card . . . . . . . . . . .26

Removing the Battery Cover . . . . . . . . . . . . . . .28

Installing the Battery . . . . . . . . . . . . . . . . . . . . .29

Charging the Battery . . . . . . . . . . . . . . . . . . . . .33

Checking Battery Charge Level . . . . . . . . . . . . .35

Battery Information . . . . . . . . . . . . . . . . . . . . . .36

Using Your Phone . . . . . . . . . . . . . . . . . . . . . . . .37

Startup Procedures . . . . . . . . . . . . . . . . . . . . . .38

Placing a Call. . . . . . . . . . . . . . . . . . . . . . . . . . .42

Receiving a Call. . . . . . . . . . . . . . . . . . . . . . . . .47

Additional Phone Features . . . . . . . . . . . . . . . .50

Using In-Call Features . . . . . . . . . . . . . . . . . . . .53

Muting a Call . . . . . . . . . . . . . . . . . . . . . . . . . . .54

Using Call Waiting . . . . . . . . . . . . . . . . . . . . . . .55

Placing a Call on Hold . . . . . . . . . . . . . . . . . . . .56

Making a Conference Call . . . . . . . . . . . . . . . . .58

Using the Menus . . . . . . . . . . . . . . . . . . . . . . . . .61

Using the Options Menu . . . . . . . . . . . . . . . . . .62

Using the Quick Access Menu. . . . . . . . . . . . . .64

Using the In-Call Menu . . . . . . . . . . . . . . . . . . .66

Managing the Phone Book . . . . . . . . . . . . . . . . .69

Phone Book Menu . . . . . . . . . . . . . . . . . . . . . . .70

Organizing Your Phone Book . . . . . . . . . . . . . .71

Storing Names and Numbers . . . . . . . . . . . . . .73

Entering Names. . . . . . . . . . . . . . . . . . . . . . . . .75

Using Pauses in Numbers . . . . . . . . . . . . . . . . .77

iii

iv

Using Phone Number Prefixes . . . . . . . . . . . . . 79

Locating Entries . . . . . . . . . . . . . . . . . . . . . . . . 80

Calling, Modifying, or Erasing an Entry . . . . . . 82

Checking Phone Book Capacity . . . . . . . . . . . . 83

Preventing Access to the Phone Book . . . . . . . 84

Restricting Phone Use . . . . . . . . . . . . . . . . . . . 85

Viewing the Last Ten Calls Made or Received . 90

Viewing and Modifying Your Phone Numbers. . 91

Using One-Touch Dialing . . . . . . . . . . . . . . . . . 93

Viewing Service Phone Numbers . . . . . . . . . . . 95

Using Calling Features . . . . . . . . . . . . . . . . . . . 97

Call Related Features Menu . . . . . . . . . . . . . . . 98

Forwarding Calls When Unavailable . . . . . . . . . 99

Forwarding All Your Calls . . . . . . . . . . . . . . . . 100

Using Detailed Call Forwarding . . . . . . . . . . . 102

Canceling All Forwarding . . . . . . . . . . . . . . . . 104

Activating Call Waiting . . . . . . . . . . . . . . . . . . 105

Restricting Calls with Call Barring . . . . . . . . . 106

Viewing the Battery Meter . . . . . . . . . . . . . . . 111

Viewing Signal Strength . . . . . . . . . . . . . . . . . 112

Deactivating Pending Call Drop Signal . . . . . . 113

Using Message Services . . . . . . . . . . . . . . . . . 115

Messages Menu . . . . . . . . . . . . . . . . . . . . . . . 116

Checking Your Voicemail . . . . . . . . . . . . . . . . 117

Managing Your Received Messages . . . . . . . 118

Accessing Received Messages . . . . . . . . . . . 120

Managing Outgoing Messages . . . . . . . . . . . . 124

Managing Other Message Settings . . . . . . . . 132

Customizing Phone Features . . . . . . . . . . . . . 137

Phone Setup Menu . . . . . . . . . . . . . . . . . . . . . 138

Managing Phone Ringer Settings . . . . . . . . . . 139

Locking and Unlocking Your Phone . . . . . . . . 141

Activating the Infrared Data Port. . . . . . . . . . . 143

Protecting the SIM Card . . . . . . . . . . . . . . . . . 144

Managing Other Security Settings . . . . . . . . . 146

Activating Extended Menus . . . . . . . . . . . . . . 148

Managing Time and Date Settings . . . . . . . . . 149

Selecting the Display Language . . . . . . . . . . . 152

Turning Lights On and Off . . . . . . . . . . . . . . . .153

Setting Keypad Tones . . . . . . . . . . . . . . . . . . .154

Managing Phone Settings . . . . . . . . . . . . . . . .155

Accessing the Network . . . . . . . . . . . . . . . . . . .159

Network Selection Menu . . . . . . . . . . . . . . . . .160

Registering With the Satellite Network . . . . . .161

Selecting a Mode . . . . . . . . . . . . . . . . . . . . . . . .163

Mode Selection Menu . . . . . . . . . . . . . . . . . . .164

Selecting Satellite Mode . . . . . . . . . . . . . . . . .165

Timing Your Calls . . . . . . . . . . . . . . . . . . . . . . .167

Call Meters Menu . . . . . . . . . . . . . . . . . . . . . .168

Showing Call Timers . . . . . . . . . . . . . . . . . . . .169

Setting Audible Call Timers . . . . . . . . . . . . . . .171

Showing the In-Call Timer . . . . . . . . . . . . . . . .173

Showing the Lifetime Timer . . . . . . . . . . . . . . .174

Customizing the Menu System . . . . . . . . . . . .175

Personalizing the Options Menu . . . . . . . . . . .176

Personalizing the Quick Access Menu . . . . . .178

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . 179

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183

Patent Information . . . . . . . . . . . . . . . . . . . . . 195

Warranty Information . . . . . . . . . . . . . . . . . . . .197

v

vi

Safety Information

Important: Read this information before using your wireless mobile phone.

Exposure to Radio Frequency Signals

Your wireless mobile telephone is a low power radio transmitter and receiver. When it is ON, it receives and also sends out radio frequency

(RF) signals.

International agencies have set standards and recommendations for the protection of public exposure to RF electromagnetic energy.

• International Commission on Non-Ionizing Radiation Protection

(ICNIRP)1996

• Verband Deutscher Elektrotechniker (VDE) DIN-0848

• United States Federal Commission, Radio Frequency Exposure

Guidelines (1996)

• National Radiological Protection Board of the United Kingdom, GS

11,1988

• American National Standards Institute (ANSI) IEEE. C95. 1-1992

• National Council on Radiation Protection and Measurements

(NCRP). Report 86

• Department of Health and Welfare Canada. Safety Code 6

These standards are based on extensive scientific review. For example, over 120 scientists, engineers, and physicians from universities, government health agencies, and industry reviewed the available body of research to develop the updated ANSI standard.

The design of your phone complies with these standards when used as described under “Phone Operation” on page 8.

Antenna Care

Use only the supplied or an approved replacement antenna.

Unauthorized antennas, modifications, or attachments could damage the phone and may violate local agency regulations.

7

Phone Operation

Normal Operation: Hold the phone as you would any other telephone.

Rotate the antenna to either the left or right detent, and make sure the antenna is fully extended. The antenna should be vertical to the ground and have a clear unobstructed view of the sky.

Tips on Efficient Operation: For your phone to operate most efficiently:

• Rotate and extend your antenna fully.

• Make sure the antenna has a clear unobstructed view of the sky.

• Do not touch the antenna unnecessarily when the phone is in use.

Contact with the antenna affects call quality and may cause the phone to operate at a higher power level than otherwise needed.

• Do not wear the phone on your body while making calls with the headset accessory in satellite mode. Wearing the phone on the body can interfere with proper phone operation, since the antenna requires a clear unobstructed view of the sky to access the

Iridium

®

satellite network.

Batteries

Caution: All batteries can cause property damage, injury or burns if a conductive material, such as jewelry, keys or beaded chains, touches exposed terminals. The material may complete an electrical circuit and become quite hot. To protect against such unwanted current drain, exercise care in handling any charged battery, particularly when placing it inside your pocket, purse or other container with metal objects. When the battery is detached from the phone, your batteries are packed with a protective battery cover; please use this cover for storing your batteries when not in use.

Driving

Check the laws and regulations on the use of wireless telephones in the areas where you drive. Always obey them. Observe the following guidelines when using your phone while driving.

• Give full attention to driving—driving safely is your first responsibility.

• Use hands-free phone operation, if available.

• Pull off the road and park before making or answering a call if driving conditions so require.

8 Safety Information

Electronic Devices

Most modern electronic equipment is shielded from RF signals. However, certain equipment may not be shielded against the RF signals from your wireless phone.

Pacemakers

The Health Industry Manufacturers Association recommends that a minimum separation of six inches (6") be maintained between a handheld wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless

Technology Research.

Persons with pacemakers:

• should ALWAYS keep the phone more than six inches from their pacemaker when the phone is turned ON

• should not carry the phone in a breast pocket

• should use the ear opposite the pacemaker to minimize the potential for interference

• should turn the phone OFF immediately if you have any reason to suspect that interference is taking place

Hearing Aids

Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to consult your hearing aid manufacturer to discuss alternatives.

Other Medical Devices

If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information.

Turn your phone OFF in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.

Vehicles

RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle.

Safety Information 9

Posted Facilities

Turn your phone OFF in any facility where posted notices so require.

Aircraft

Airline regulations prohibit using your phone while in the air. Check and comply with the policy of your airline regarding the use of your phone while the aircraft is on the ground.

Switch OFF your phone before boarding an aircraft.

Blasting Areas

To avoid interfering with blasting operations, turn your phone OFF when in a “blasting area” or in areas posted: “Turn off two-way radio.” Obey all signs and instructions.

Potentially Explosive Atmospheres

Turn your phone OFF and do not remove your battery when you are in any area with a potentially explosive atmosphere. Obey all signs and instructions. Sparks from your battery in such areas could cause an explosion or fire resulting in bodily injury or even death.

Areas with a potentially explosive atmosphere are often but not always clearly marked. They include, but are not limited to: fueling areas such as gasoline stations; below deck on boats; fuel or chemical transfer or storage facilities; areas where fuel odors are present (for example, if a gas/propane leak occurs in a car or home); areas where the air contains chemicals or particles, such as grain, dust, or metal powders; and any other area where you normally would be advised to turn off your vehicle engine.

For Vehicles Equipped with an Air Bag

An air bag inflates with great force. Do NOT place objects, including both installed or portable wireless equipment, in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result.

AC Travel Charger with International Plug Kit

TUV Product Services Approval only applies when the Europlug adapters are used with this product.

Die TÜV-Zulassung ist nur gültig, wenn das Gerät mit

Europlug-Adaptern verwendet wird.

10 Safety Information

Overview

This chapter provides an overview of this user’s guide, your new satellite phone, and available Satellite Series™ accessories.

11

Guide Overview

Key Presses

Key presses are represented in this guide using symbols. A sequence of key presses may be shown as follows:

M O C

This means you should press

M

followed by

O and then

C

, in sequence, not simultaneously.

Prompts and Messages

Your phone responds to key presses by displaying either a prompt that guides you to the next action or a message confirming that your action is complete.

Prompts and messages are represented in this guide in LCD style, for example:

Enter PIN

or

Completed

.

Tips

In the margins of this guide are useful hints and ways to improve your phone’s performance.

12 Overview

Phone Overview

Antenna

Lock Release

Button

Signal

Strength

Indicator

Volume

Control

Keys

Display Status

Indicators

Message

Key

Status

Indicator

Satellite

Antenna

Earpiece

Real-Time

Clock

Battery

Charge

Indicator

Display

Battery

Compartment

Alphanumeric

Keypad

Headset Jack

Quick Access

Key

Accessory and Power

Connector

Microphone

Note: Phone shown with antenna in stowed position.

Overview 13

Special Keys

Key Function

S

Turns the phone’s power on and off

O Selects menu settings or options, or initiates and answers calls

?

Takes you directly to the Messages menu, where you can call your voicemail number or read messages you have received

I

Stores numbers in the phone book

Q

Recalls numbers from the phone book

E

Enters the Quick Access menu

M Enters the Options menu and scrolls forward through menu features

C Clears characters from the screen or exits the

Options menu

Scrolls backward or forward through menu features

Volume Control Keys

The volume control keys are located on the left side of the phone. They adjust earpiece and ringer volume. See “Adjust Earpiece Volume” on page 50 and “Adjust Ringer Volume” on page 51 for more information.

Satellite Antenna

When you are in satellite mode, you must rotate and fully extend the satellite antenna to answer calls, make calls, and access satellite services.* See

“Holding the Phone” on page 40 for more information.

14 Overview

* Satellite products require a clear line of sight to satellite.

Satellite Antenna Lock Release

Button

This button releases the satellite antenna so you can attach the auxiliary antenna. You may also want to remove the satellite antenna if you spend a lot of time in cellular mode.

Display

Your phone’s Liquid Crystal Display (LCD) displays as many as four rows of 16 characters.

The LCD on your phone may respond slowly to key presses in extremely cold temperatures. This is normal and does not affect the phone operation in any way.

Headset Jack

The headset jack located on the right side of the phone provides a connection for an optional headset.

Accessory and Power Connector

This connector, located on the bottom of the phone, provides the connection for an external power supply or a data cable.

Overview 15

Indicators

Status Indicator

The status indicator is located at the top of your phone. This LED indicator provides information on your phone’s current state of service.

If the LED is...

Then...

Alternating red and green

A call is incoming.

Flashing green

You are receiving a signal from the

Iridium satellite network. You can make and receive calls.

Flashing yellow

You are temporarily unable to make or receive calls. Try again in a few minutes.

Flashing yellow and red

Your SIM card may be inserted incorrectly, may not be inserted, or you may be in a restricted area. You can make emergency calls only.

Flashing red Service is not available.

16 Overview

Display Status Indicators and Icons

Indicator rx q

12:00 o

+

Description

Signal Strength Indicator indicates the strength of the signal from the network. The signal strength indicator appears continuously in the top left hand corner of the display. The more segments displayed in the bar graph, the stronger the signal. Five bars indicate full signal strength.

No bars indicate a weak signal.

Battery Charge Indicator indicates the strength of the battery charge. The more segments displayed, the greater the battery charge.

When you are in satellite mode, you can also check the strength of the charge at any time through the menu. See “Viewing the Battery

Meter” on page 111 for more information.

Real Time Clock Indicator displays the time in either 12-hour or 24-hour format. See “Change the Time Displayed” on page 150 for more information.

Message Indicator appears when you receive a new message. It flashes when the SIM card is full.

See “Accessing Received

Messages” on page 120 for additional information.

Satellite Mode Indicator appears when your phone is in satellite mode. See “Selecting a Mode” on page 163 for more information.

Overview 17

18 Overview

Indicator n m k w

B

...

P

Description

Home System Indicator appears when the phone has successfully registered with the Iridium satellite system.

No Service Indicator appears when your phone is not capable of placing or receiving calls.

In Use Indicator appears when a call is in progress.

Scroll Bar appears on the right of the display when you are in a menu. The button on the scroll bar indicates where you are in the list.

Check Mark indicates a menu item is currently selected.

Hourglass Icon appears in the display when your phone has to request settings from the network.

Quick Access Menu Icons allow you to easily identify Quick Access features as you scroll through the

Quick Access menu.

Satellite Series™ Accessories

Product appearance and specifications are subject to change without notice.

Note: For maximum performance use only

Motorola Original™ accessories.

Batteries

Standard Capacity Lithium Ion Battery

• Provides up to 2.4 hours of talk time or 24 hours of standby time*

• Weighs 2.3 ounces/66 grams

High Capacity Lithium Ion Battery

• Provides up to 3.6 hours of talk time or 38 hours of standby time*

• Weighs 3.4 ounces/98 grams

Ultra High Capacity Lithium Ion Battery

• Provides up to 7.6 hours of talk time or 72 hours of standby time*

• Weighs 7 ounces/200 grams

• Available for Satellite Series

9500 phone, only

* All talk and standby times are approximate and depend on network configuration, signal strength, and the features selected.

Overview 19

20 Overview

AC Travel Charger with International

Plug Kit

The AC travel charger with international plug kit provides rapid charge for optimal performance and can be used to power the phone when the battery is depleted.

• Includes four international plug adapters for use in Europe, Australia, India, and the United

Kingdom

• May be used with both the 9505 portable phone and desktop charger

• Allows you to use the 9505 portable phone while recharging the battery

• Convenient self-storing cord

• Charges StarTAC

©

wireless phone when used with optional StarTAC adapter

Auto Accessory Adapter

Restores full battery power for portable phone operation or desktop charger functions from any operating vehicle

(using standard 12-volt accessory connector port).

• Make and receive phone calls using the auto accessory adapter for direct power when batteries are depleted

• Recharge battery while using the desktop charger or attached to portable phone

• Charges StarTAC

©

wireless phone with optional StarTAC adapter

Headset

The convenient headset provides both an earphone and microphone in one small piece for simple hands-free and private telephone conversations. The headset plugs directly into the jack on the right side of your phone.

Lanyard Wrist Strap

The lanyard wrist strap is made of nylon. It provides a convenient way to carry your phone.

Overview 21

22 Overview

Portable Auxiliary Antenna

From one car to another, this compact pocket-sized antenna with convenient magnetic mount goes in every vehicle you do to provide improved reception.

• For use with the portable phone

• Reliable magnetic mount, ceramic patch antenna

• Attached 1.5-meter cable

Note: The use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these devices.

Antenna Adapter

This adapter provides the required external antenna connection to use your 9505 portable phone with the portable auxiliary antenna.

Carry Case

This high-quality leather case helps protect your phone. It includes a belt clip and a lanyard wrist strap.

Getting Started

Getting started with your new satellite phone is easy. Just insert your phone’s SIM (Subscriber Identity Module) card and charge the battery.

This chapter shows you how.

23

Attaching the Satellite Antenna

Attach the Antenna

1. Attach the antenna in the down position.

2. Press and hold the lock release button at the top of the phone.

3. Push the antenna until it clicks into place and release the button.

2

3

Remove the Antenna

You may want to remove the satellite antenna to attach an auxiliary antenna, or if you spend the majority of your time in cellular mode.

1. Place the antenna in the down position.

2. Press the button at the top of the phone.

3

2

3. Remove the antenna by pulling straight out.

24 Getting Started

What Is a SIM Card?

Your SIM (Subscriber Identity Module) card is a small smart card that contains your phone number, service details, and memory for storing Phone Book entries and messages.

Note: Your phone has limited functionality without the SIM card.

SIM Card Protection

You may want to keep your SIM card in your wallet or purse when you are not using your satellite phone. This helps keep your personal information secure and gives you access to your service even if your phone is not available. If you forget your phone, insert your SIM card into a friend’s phone to access your personal service.

Caution: Do not bend or scratch your SIM card, and avoid exposing your card to static electricity, water, or dirt.

Getting Started 25

Installing/Removing the SIM Card

The SIM card is stored in a recess in the battery compartment. It is normally covered by the battery when you use your phone.

Caution: Make sure your phone is powered off before inserting or removing the SIM card. If you don’t, you may damage the memory on your SIM card.

1. Turn your phone off by pressing and holding the

S

key.

2. Remove the battery cover and battery .

(See “Remove the Battery” on page 31.)

3. Slide the SIM card tray to the left and lift up the right side of the tray.

3

26 Getting Started

4. Insert the SIM card into the tray with the notch up and the gold plate facing out.

or

Remove the SIM card from the tray.

4

5. Push down the SIM card tray and slide the tray to the right to lock it in place.

5

6. Replace the battery and battery cover .

(See “Insert the Battery” on page 29.)

Getting Started 27

Removing the Battery Cover

Your new batteries are shipped uncharged and fitted with protective covers.

Save the covers for storing and carrying unused batteries. The covers prevent metal objects from contacting both battery terminals, which can reduce the risk of injury, or damage from a battery short circuit.

Remove the Battery Safety Cover

1. Press in the release latch.

2. Continue pushing in and upwards until the battery slips free from its cover.

Attach the Battery Safety Cover

1. Lower the side opposite the latch into the cover.

28 Getting Started

2. Slip the side with the release latch down until it clicks.

Installing the Battery

Insert the Battery

Note: Insert only Motorola-approved batteries in your phone. If you insert an unapproved battery you will see an

Invalid Batt.

message. You are able to discharge the battery, but you cannot recharge it.

1. Remove or rotate the satellite antenna before installing the battery. (See “Attaching the Satellite Antenna” on page 24.)

2. Press and hold the release latch at the top of the battery compartment cover.

3. Pull the cover upward , and then remove it from the phone.

3

2

4.

Align the arrows on the battery with the arrows in the battery

4 compartment.

Insert the battery , bottom end first, into the compartment, and then press the battery downward until it clicks into place.

Tip: The battery compartment is located on the back of the phone.

Getting Started 29

30 Getting Started

5. Insert the bottom end of the battery compartment cover into the slots at the end of the compartment.

6. Snap the cover down into place.

5

6

Remove the Battery

1. Remove or rotate the satellite antenna before removing the battery. (See “Attaching the Satellite Antenna” on page 24.)

2. Press and hold the release latch at the top of the battery compartment cover.

3. Pull the cover upward , and then remove it from the phone.

3

2

4. Press and hold the release latch at the base of the battery.

4

Tip: The battery compartment is located on the back of the phone.

5. Pull the battery upward and out of the phone.

5

Getting Started 31

32 Getting Started

6. Insert the bottom end of the battery compartment cover into the slots at the end of the compartment.

6

7

7. Snap the cover down into place.

8. Replace the battery safety cover. See “Attach the Battery Safety Cover” on page 28 for more information.

Charging the Battery

Any battery that hasn’t been used for a month or more—including new batteries—should be charged for about 3–4 hours before use.

Using the Internal Charger

A battery charger is built right into your phone. Using either the travel charger or auto accessory adapter, you can plug the handset directly into a power source to charge the installed battery.

1. Connect the travel charger or auto accessory adapter to the phone.

2. Plug the travel charger or auto accessory adapter into the appropriate power source.

The phone beeps, flashes the q

(battery charge) indicator, and displays

Charging

Battery

:

3.

If the phone is powered on, press

S

to place the phone in charge-only mode.

If the phone is powered off, it automatically enters charge-only mode.

Getting Started 33

34 Getting Started

Note: You can still place and answer calls while using the internal charger. If you wish to place or answer a call:

Press

S

to exit charge-only mode and return to normal operation.

Remember that talking on the phone uses power, so charging takes more time.

Using the Desktop Charger

You can use the front compartment of the desktop charger to charge the battery in your phone. You can also charge a spare battery in the rear compartment. The front compartment charges first, then the charger switches to the rear compartment.

To charge:

1. Connect the travel charger to the desktop charger.

2. Plug the travel charger into the appropriate power source.

3. Insert your phone with a battery installed.

4. Insert a spare battery in the rear compartment, if desired.

Checking Battery Charge Level

Low Battery Warning

When the battery level is low and only a few minutes of talk-time remains, your phone signals you in two ways:

•

Low Battery

appears on the display.

• A warning tone (two double beeps) sounds.

Note: To help maintain the best battery and phone performance, recharge your battery as soon as possible after you receive the low battery warning.

View Battery Meter

The q (battery charge) indicator appears continuously in the upper right corner of the display.

You can also display a more detailed battery meter at any time to check the charge level on your battery.

See “Viewing the Battery Meter” on page 111 for more information.

Getting Started 35

Battery Information

Maximizing Battery Life

Caution: To prevent injuries or burns, do not allow metal objects to contact or short circuit the battery terminals.

Caution: At extreme temperatures (eg., -10°C) battery life capacity is significantly reduced.

To ensure maximum battery life and use your battery to its fullest capacity, observe the following guidelines.

• Always use Motorola-approved battery chargers.

• Always use Motorola-approved batteries

(Standard, High Capacity, Ultra High Capacity battery).

• Maintain the battery at or near room temperature when charging.

• When you don’t plan on using a particular battery for a while, store the battery uncharged in a cool, dark, and dry place.

• To prolong the life of your batteries, avoid exposing them to temperatures below -10°C

(14°F) or above 45°C (113°F).

• Always take your phone with you when you leave your car.

Disposing of Batteries

To dispose of batteries, check with your local recycling center for a battery recycler near you.

Never dispose of batteries in fire.

36 Getting Started

Using Your Phone

Read this chapter to learn how to get up and running with your new satellite phone.

37

Startup Procedures

Turn the Power On and Off

1. Insert your SIM card if necessary. (See

“Installing/Removing the SIM Card” on page 26.)

2. Press and hold

S

to turn the phone on and off.

When you turn your phone’s power on, you will hear the wakeup tone (or feel a vibration if the VibraCall

®

alert function is activated) and see the wakeup screen. The wakeup screen displays a short animated sequence that reminds you to rotate and extend the antenna, and shows how to hold the phone for best reception (see illustration). You may see a number of other power-on messages

(described on pages 39-40).

When the m

(no service) indicator disappears and the n

(home system) indicator appears, you are ready to make a call.

38 Using Your Phone

Power-On Messages

Once your phone is powered on, you may see:

Message

Searching...

Description

The phone is attempting to establish communications with the satellite or cellular network. See “Accessing the

Network” on page 159.

Rotate and

Extend Antenna

Rotate Antenna

Registering...

or

Registering...

You also hear a tone when you see this message. Make sure the antenna is rotated upward and fully extended and has a clear unobstructed view of the sky.

Your phone is registering with the network. When the process is complete, you will see

Registered

.

See “Accessing the Network” on page 159.

Check Signal

Your phone is unable to establish registration with the satellite network. Move to a location with a clear unobstructed view of the sky.

Invalid Account

Contact your service provider.

Enter Phone

Unlock Code

Your phone was locked after the last use. Enter your four-digit unlock code and press

O

to proceed. See

“Locking and Unlocking Your Phone” on page 141.

Enter PIN

Insert Card

Check Card

Enter the four- to eight-digit SIM card PIN code provided by your service provider and press

O

to proceed. See “Protecting the SIM

Card” on page 144.

Power off your phone, make sure your SIM card is inserted completely, and then power your phone on again.

The SIM card is damaged or inserted the wrong way.

Using Your Phone 39

Message

Blocked

!

Blocked

Bad Card

See Supplier

Description

If the SIM card PIN code is incorrectly entered three times in a row, your phone becomes blocked.

See “Unblock the PIN Code” on page 145 for instructions on how to unblock it.

If the SIM card PIN2 code is incorrectly entered three times in a row, your phone becomes blocked.

See “Unblock the PIN2 Code” on page 147 for instructions on how to unblock it.

Your SIM card has been damaged or incorrectly issued. Contact your service provider for information.

Holding the Phone

1. Rotate the antenna to either the left or right detent. The antenna will stop here.

Left Detent Right Detent

40 Using Your Phone

2. Extend the antenna by pulling out on the end of it.

2

1

The antenna should be vertical to the ground when you talk on the phone (as shown in the following illustration from the wakeup screen animated sequence).

3.

Make sure the antenna has a clear unobstructed view of the sky.

Standby Mode

To conserve energy, your phone may turn off its display backlight when you have not pressed a key for several seconds. The light reappears the next time you press a key.

Using Your Phone 41

Placing a Call

Tip: If you make a mistake, press

C

once to delete the last digit, or press and hold

C

to clear all digits.

To place a call, your phone must be powered on, have a SIM card inserted, be unlocked, and be in contact with the satellite or cellular network

(depending on your mode). See “Accessing the

Network” on page 159 for network information.

You can enter a phone number up to a maximum of

20 digits. The digits are displayed in two rows, 16 digits in the top line and four digits in the next line.

Dial a Number

1. Rotate and fully extend the satellite antenna if you are in satellite mode. See “Holding the

Phone” on page 40.

2. Enter the number using the digit keys. As you begin entering digits, you will see

Call?

.

When you are in satellite mode, you must enter the phone number in international format:

[ international access code ,

00

, or

+

]

[ country code or Iridium country code ]

[ phone number ]

Note: If you are calling another Iridium satellite subscriber, use the Iridium code instead of the country code.

3. Press

O

. You will see

Calling

followed by the number you dialed.

You will see either the flashing message

Calling

or the flashing messages

Calling

,

Registering...

, and the phone will play a series of setup tones.

If the call connects and is answered,

Connected appears on the display for a few seconds, followed by

End Call?

.

42 Using Your Phone

If the call does not connect, you may see one of the following messages:

Message Description

Rotate and

Extend Antenna

Make sure the antenna is rotated upward and fully extended and has a clear unobstructed view of the sky.

Busy Try Later or

Please Try Later

The phone is unable to access the network. Try again in a few minutes.

Restricted Area

Redial?

The phone is unable to access the network. Move to an area where calls are allowed.

Press

O

to redial the number automatically. See “Automatic

Redial” on page 44 for more information.

International Dialing

To make an international phone call:

1. Press and hold

0

.

After a few seconds the international dialing prefix

+

appears in the display. This allows you to call from any country without knowing the local international access code.

2. Enter the country code followed by the phone number. The country code follows the conventional format.

Using Your Phone 43

Automatic Redial

If the number or your network is busy, you will see

Redial?

for five seconds.

Press

O

to redial the number automatically.

Note: Your phone makes a maximum of ten redial attempts. If the call cannot be connected within this maximum, you will see the message

Redial Failed

.

Redial Last Number Called

Whenever your phone is on standby, you can redial the last number called:

1. Press

O

to display the last number dialed.

2. Press

O

again to place the call.

Dial Special Characters

You can insert special characters in your numbers:

To enter...

0

*

+

(for international calls)

¨

(for pause dialing) supplementary service numbers, PINs, and unblocking

Then...

Press

0

.

Press

*

.

Press and hold

0

.

Press and hold

*

.

Press

#

or

*

one or more times as necessary.

Dial a Number With Pauses

See “Using Pauses in Numbers” on page 77 for information on dialing numbers with pauses.

44 Using Your Phone

Dial a Number from the Phone Book

Your phone contains a phone book that you can use to store names and telephone numbers. Once you have stored information in your phone book, you can save dialing steps by:

• using one-touch dialing (page 93)

• recalling and dialing an entry by location

(page 81)

• recalling and dialing an entry by name

(page 80)

• recalling and dialing one of the last ten numbers called (page 90)

See “Managing the Phone Book” on page 69 for information on how to store and retrieve names and numbers from the phone book.

Make an Emergency Call

You can make an emergency call virtually anywhere in the world (without unlocking your phone) by dialing 112. Provided your phone has found a network, you are able to make an emergency call.

The emergency call is directed to a central emergency operator.

To make an emergency call:

Dial

1 1 2

.

You will see the message

Emergency Calling

.

In addition, your Iridium service provider may have provided an additional emergency calling code on your SIM card. Check with your service provider.

Call a Number in a Message

For details on how to call a phone number embedded in a message, see page 123 in the

“Using Message Services” chapter.

Using Your Phone 45

End a Call

Use one of the following procedures to end a call:

• Press

O

.

• Press

C

.

46 Using Your Phone

Receiving a Call

Receive a Phone Call

To receive a call, your phone must be powered on, have a SIM card inserted, be unlocked, and be in contact with the satellite or cellular network

(depending on your mode). See “Accessing the

Network” on page 159 for network information.

There are two scenarios for receiving calls in satellite mode, depending on the antenna position:

(1) antenna raised and fully extended, or

(2) antenna stowed or in the down position.

Antenna Raised and Fully Extended

When you receive a call:

• Your phone rings and/or vibrates.

• The status indicator alternates red and green.

• The phone displays

Call

, followed by

Answer?

on the next line.

To answer the call:

Press or

#

O

).

or any digit key (

1

-

9

,

*

You will see

Connected

.

If the call does not connect properly, you may see one of the following messages:

Message

Orient Antenna

Call Attempt

Call Failed

Description

You need to fully extend the antenna upwards with a clear unobstructed view of the sky.

The antenna is not properly adjusted or the network signal is not strong enough.

Tip: See page 140 to set your phone’s alert.

Using Your Phone 47

Antenna Stowed or in the Down Position

When you receive a call:

• The phone chirps up to three times to alert you of an incoming call.

• The phone displays by

Rotate Antenna

, followed

Call Attempt

on the next line.

You must rotate and extend the antenna as quickly as possible to receive the call.

Rotate and fully extend the antenna as described in “Placing a Call” on page 42.

You will see

Iridium Call Attempt

. Do not attempt to answer until the phone rings or vibrates.

After several seconds, your phone will ring or vibrate and display

Call

followed by

Answer?

on the next line.

To answer the call:

Press

O or any digit key (

1

-

9

,

* or

#

).

You will see

Connected

.

If the call does not connect properly, you may see one of the following messages:

Description Message

Orient Antenna

Call Attempt or

Rotate Antenna

Call Attempt

Call Failed

You need to fully extend the antenna upwards with a clear unobstructed view of the sky.

The antenna is not properly adjusted or the network signal is not strong enough.

48 Using Your Phone

End a Call

Use one of the following procedures to end a call:

• Press

O

.

• Press

C

.

Unanswered Calls

If you are away from your phone or choose not to answer a call, your phone displays the message

Unanswered Call

.

Personal Mailbox

Callers who are unable to reach you can leave numeric, text, and voice messages. The next time you register with the satellite network you will receive these messages. Then you will have the option of returning the call or saving the message for later viewing.

For information on retrieving messages, see

“Accessing Received Messages” on page 120.

Using Your Phone 49

Additional Phone Features

Tip: The volume control keys are located on the side of the phone.

Lock and Unlock the Keypad

To prevent accidental usage of the phone, press the

#

and

*

keys simultaneously to lock the keypad. All keys with the exception of the

S

key are disabled. You can still answer an incoming call by pressing

O

when the keypad is locked.

To remove the keypad lock, press

#

and

* simultaneously.

Adjust Earpiece Volume

To adjust earpiece volume:

• Increase the volume by pressing the upper volume control key.

• Decrease the volume by pressing the lower volume control key.

As you press the keys, the phone’s speaker demonstrates the new volume level. The bar graph in the display represents the volume level. The higher the graph, the louder the volume.

Volume

Quit?

Note: You can also use the volume control keys to scroll through Phone Book entries.

50 Using Your Phone

Adjust Ringer Volume

To adjust the ringer volume:

Press

E

and then the up or down volume control key.

The phone sounds the new volume level as you adjust it.

Note: You can also use the Phone Setup menu to adjust ringer volume. See page 139 for more information.

View Your SIM Card Phone Number

To retrieve and view your phone number from your

SIM card:

Press

Q #

.

Notes:

• If you do not see your phone number, the number has not been programmed onto your

SIM card. You can program your phone number onto your SIM card by following the steps described in “Modify Your Phone

Number(s)” on page 92.

• You can also use the Phone Book menu to view your phone number. See page 91 for more information.

Tip: The volume control keys are located on the left side of the phone.

Using Your Phone 51

52 Using Your Phone

Using In-Call Features

Read this chapter to learn how to use In-Call menu features. The In-Call menu is displayed when you press

M

during a call. See “Using the

In-Call Menu” on page 66 for more information.

53

Muting a Call

Tip: You can also mute the phone from the

Quick Access menu. See

“Using the

Quick Access

Menu” on page 64.

For privacy during a call, try muting the phone. You hear the party on the other end, but the other party does not hear you.

While in a call:

1. Press

M

until you see

Turn Mute on or off

.

2. Press

O

to select. You will see

Mute

.

To unmute a call:

Press

O

again to resume your conversation.

or

1. Press

M

until you see

Turn Mute on or off

.

2. Press

O

to select.

54 Using In-Call Features

Using Call Waiting

Note: You must subscribe to this network feature through your service provider. Contact your service provider for additional information.

If you have subscribed to Call Waiting, you must first activate it through the Options menu. (See

“Activating Call Waiting” on page 105.) After you activate it, you are notified of incoming calls while you are on the line in two ways. When a call comes in, you hear a beep and see the message

Call

Waiting followed by

Answer?

.

If you want to...

Then...

accept the Press

O

.

waiting call Your current call is placed on hold.

reject the waiting call end current call before answering the waiting call

Press

C

.

1.

Press

M

. You will see

End Active Call

.

2.

Press

O

. Your phone rings and can now be answered normally.

You may see one of the following messages during call waiting activities:

Message

Trying

Hold

Failed

Cannot Hold

Second Call

Reconnect

Failed

Busy

Try Later

Description

Your phone is attempting to switch between the current and held call.

The attempt to hold a call was unsuccessful.

A call is already on hold. You can only place one call on hold.

The held call could not be made active again.

Your phone is working on a previous command. Wait a short time before repeating the new command.

Using In-Call Features 55

Placing a Call on Hold

Note: You must subscribe to this network feature through your service provider. Contact your service provider for additional information.

You can place a call on hold to receive a new call or while making a new call. You can only place one call on hold at a time, so some options may not be accessible if you have already placed a call on hold.

To place a call on hold:

1. Press

M

until you see

Hold Call

.

2. Press

O

. Your current call is put on hold and you will see

Call Holding followed by

Reconnect?

.

Once your call is on hold, you have these options:

If you want to...

make a new call switch between calls end both calls end current call

Then...

1.

Press

M

New Call

, and then press to select.

until you see

Make

2.

Dial the number as usual, and then press

O

to place the call.

When you are connected to either number, you will see

2 Calls followed by

Switch?

.

Press

O

to switch to the other call and automatically place the current call on hold.

Press

M

& Held Call

, and then press to select.

until you see

End Active

Both calls are disconnected, and the display returns to standby.

Press

C at any time.

56 Using In-Call Features

If you want to...

end call that is on hold

Then...

Press

M

until you see

Call

, and then press

End Held

to select.

The held call is disconnected, the current call remains connected, and you see

End Call?

.

You may see one of the following messages:

Message

Trying

Hold

Failed

Cannot Hold

Second Call

Reconnect

Failed

Busy

Try Later

Description

Your phone is attempting to switch between the current and held call.

The attempt to hold a call was unsuccessful.

A call is already on hold. You can only place one call on hold.

The held call could not be made active again.

Your phone is working on a previous command. Wait a short time before repeating the new command.

Using In-Call Features 57

Making a Conference Call

Note: You must subscribe to this network feature through your service provider. Contact your service provider for additional information.

This feature lets you participate in a conference call of up to five parties.

To make a conference call, you must be engaged in an active call and have another call on hold. You can do this by accepting a waiting incoming call during an active call, or by placing an active call on hold and making a second call.

To begin a conference call:

1. Press

M

until you see

Conference Call

.

2. Press

O

. Your phone joins your current call with your held call. and you will see

Conference followed by

End Call?

.

While in a conference call, you have these options:

If you want to...

place the active call on hold make a new call

Then...

Press

M

until you see and then press

O

Hold Call current call is put on hold and you will see

Call Holding

Reconnect?

.

followed by

,

to select. Your

1.

Press

M

New Call

, and then press to select.

until you see

Make

2.

Dial the number as usual, and then press

O

to place the call.

If you want to add the new party to the conference call, repeat steps 1 and 2 for beginning a conference call as described above.

58 Using In-Call Features

If you want to...

hold a private conversation with one of the conference call participants end conference call

Then...

1.

Press

M

until you see

Call

, and then press

Split

to select. You will see the name of the first party added to the conference call.

2.

Press

M

to scroll through the list of call participants until you find the party you want to talk to, then press

O

to select.

The selected party becomes the active call, with the other parties placed on hold.

To return the private call to the conference call, repeat the steps for making a conference call as described on page 58.

Press

C at any time.

You may see one of the following messages:

Message

Conference

Unsuccessful

Split Call

Unsuccessful

Conference Full

Description

One of your calls is already engaged in a conference call controlled by a remote party or

The attempt to join the held call and the active call was unsuccessful.

You already have the maximum number of five callers joined in a conference call.

You already have an active call and a call on hold or

The attempt to split the call was unsuccessful

Using In-Call Features 59

Keypad Controls

Many conference call features are directly accessible by entering specific key sequences on the keypad during a call:

If you want to...

begin a conference call

Then...

Press

3 O

.

add a single call to a conference call hold a private conversation with one participant

Press

3 O

.

Press

2

[ call number ]

O

(Where [ call number ] is the sequential order in which the call was placed or received.) place active call on hold, accept held or waiting call

Press

2 O

.

release a specific conference call participant

Press

1

[ call number ]

O

.

(Where [ call number ] is the sequential order in which the call was placed or received.) end all held calls

(no waiting call)

Press

0 O

.

end all active calls, accept held or waiting call

Press

1 O

.

60 Using In-Call Features

Using the Menus

Many of your phone’s features are organized into lists of options called menus . There are three menus:

• The main Options menu lets you select and/or adjust phone features.

• The Quick Access menu gives you instant access to the menu features you use most frequently.

• The In-Call menu gives you access to call-related features when you are in a call.

Some options give you access to additional lists of options called submenus .

61

Using the Options Menu

The Options menu gives you access to your phone’s features and options. You can not access this menu during a call.

Navigate the Options Menu

Learning how to use just a few keys enables you to move freely through the entire menu system.

If you want to...

enter the Options menu

Then...

Press

M

. You will see the first available submenu.

• Press

M

to scroll forward.

scroll through the

Options menu select options and submenus exit features and menus

• Press to scroll backward or forward.

Press

O to select a menu option or submenu when that option or submenu name is displayed.

• Press

C

to exit the feature or submenu.

• Press and hold

C

to exit the Options menu.

Note: If you press

M

during a call you will see the

In-Call menu, which is described on page 66.

62 Using the Menus

How the Phone Responds

As you scroll through the Options menu, you will see one of three questions on the bottom line of the display.

If your phone asks...

View Options?

Select?

Quit?

Then...

Press

O

to enter the submenu.

Press

O

to select the displayed feature.

Press

O

to exit the feature.

Display Messages and Indicators

If you see...

Then...

y Completed

This indicates a feature has been activated.

!

Failed

Enter PIN or

Enter Name u Busy

Try Later

The display returns to the menu in a few seconds.

Enter requested information, then press

O

.

You may have requested information while your phone was completing another task.

The scroll bar indicates where you are in a menu.

w Your phone may take a few seconds to request settings from the network.

Customize the Options Menu

To personalize the Options menu—to hide and move features—see “Move Menu Features” on page 176.

Using the Menus 63

Using the Quick Access Menu

The Quick Access menu is a way to keep your favorite menu options readily accessible. Each digit key,

1

to

9

, is matched to a Quick Access feature. See the table on page 65 for the default setup.

If you know the number of the feature, activating that option takes only two button presses! If you do not know the number or want to review your options, just scroll through the icon menu and read the tag attached to each option.

Activate the Feature Directly

To access the feature directly:

Press

E

, and then press the digit key of the feature.

Scroll to the Feature

To scroll to the feature:

1. Press

E

.

2. Press

M

to scroll through the available features.

3. Press

O

to select a feature.

64 Using the Menus

Default Quick Access Settings

The following features (and associated icons) are the default settings for the Quick Access menu.

Key

1

2

3

4

5

6

7

8

9

Icon Quick Access Feature

B Find Name searches your Phone

Book by the full name.

J Mute mutes and unmutes a call in progress.

R

Call Voicemail

1

calls your voicemail number to check your voicemail.

G b

L

K

Battery Meter displays a fuel gauge indicating charge. The more bars, the greater the charge.

Lock Now locks your phone immediately.

Vibrate On/off activates or deactivates the VibraCall

®

alert function.

Read Messages displays the newest message received.

f

P

Register Now initiates a search for the Iridium satellite network. You must wait three minutes between registration attempts.

Forward On/Off

1

activates or deactivates unconditional call forwarding depending on the current setting.

1 You must subscribe to this network feature through your service provider. Contact your service provider for additional information.

Customize the Quick Access Menu

See “Personalizing the Quick Access Menu” on page 178 for instructions on how to modify the feature selection on the Quick Access menu.

Using the Menus 65

Using the In-Call Menu

This menu lets you access specific features while you are in a call. The In-Call menu is only available when you are in a call. You cannot review it off-line.

Entering the In-Call Menu

While you are in a call:

Press

M

to view the In-Call menu features.

In-Call Menu Features

The In-Call menu dynamically changes depending on the type of call you are in and the mode you have selected.

The following options appear on the In-Call menu.

Type of call single active call held call active call and a call waiting active call and a held call held call and a call waiting

Options

Hold Call

Make New Call

Turn Mute on or off

Make New Call

End Held Call

End Active Call

Reject Call Waiting

Turn Mute on or off

End Active Call

Turn Mute on or off

End Held Call

End Active & Held Call

Conference Call

Reconnect Held Call

Reject Call Waiting

End Held Call?

66 Using the Menus

Type of call active call, held call, and a call waiting single active conference call active conference call and a call waiting

(conference call) active call and a held call

(conference call) active call, held call, and a call waiting

Options

End Active Call

2 Calls Switch

Turn Mute on or off

End Held Call

End Active & Held Call

Conference Call

Hold Call

Make New Call

Turn Mute on or off

Split Call

End Active Call

Reject Call Waiting

Turn Mute on or off

Split Call

End Active Call

Turn Mute on or off

End Held Call

End Active & Held Call

Conference Call

End Active Call

2 Calls Switch

Turn Mute on or off

End Held Call

End Active & Held Call

Conference Call

Using the Menus 67

68 Using the Menus

Managing the Phone Book

Your satellite phone can store up to 100 names and numbers, and your

SIM card expands memory capacity even more.

You can use the dedicated keys or the Phone Book menu to add and retrieve numbers from the phone book. With the Phone Book menu you can also access phone book maintenance and security features.

69

Phone Book Menu

Phone Book

Personal Numbers

Find Entry By Name

Enter Name:

Call Number

Modify Name Or Number

Erase Name And Number

Find Entry By Location

Enter Location:

Call Number

Modify Name Or Number

Erase Name And Number

Add Entry

Add To Phone Memory

Add To SIM Card Memory

Check Capacity

Check Phone Capacity

Check SIM Capacity

Prevent Access

No Memory Restrictions

To Phone Memory

To SIM Card Memory

To Phone & SIM Memory

Show Services

Last Ten Calls

Last Calls Made

Erase All Numbers

My Phone Number(s)

Fixed Dialing

View Fixed Dial List

Setup Fixed Dialing

On/Off

Edit Entry

Add Entry

Erase Entry

One-Touch Dial Setting

To Phone Memory

To SIM Card Memory

To Fixed Dial List

70 Managing the Phone Book

Organizing Your Phone Book

Each name and phone number in your Phone Book is stored in a numbered memory location. The satellite phone has two types of memory—phone memory and SIM card memory.

Phone Memory SIM Card Memory

1

Personal

Numbers

Fixed Dial

Numbers

Phone

Number Digits

100 entries

No entries

32

155 entries

40 entries

20

Name

Characters

Location

Numbers

16

1-100

16

101-255

1 SIM card capacity varies depending upon the card issued by your service provider.

Your phone’s memory can seem overwhelming if you do not have a strategy for organizing your

Phone Book. Begin setting up your Phone Book by asking yourself three questions:

Which numbers do I call most?

Make a list of the numbers you call most frequently.

You will probably want to store these numbers in the first nine memory locations of your Phone Book. You can then dial them with a single keystroke by using one-touch dialing.

Managing the Phone Book 71

Tip: If you have many entries, group them in blocks of ten to make them easier to find.

When do I use these numbers?

Group the numbers on the list according to when you use them. Most people call a different set of numbers during the day than they do in the evening and on weekends. You can switch one-touch dialing to your phone’s memory (locations 1–9), your SIM card’s memory (locations 101–109), or to your fixed dial list (locations 1–9). Store your evening and weekend numbers on one type of memory and your daytime numbers on another.

Which numbers do I need to keep secure?

Use your SIM card to store the numbers you need to keep secure, like the numbers of friends and family members. You can remove your SIM card and keep it securely in your wallet or purse when you are not using your phone. If you wish, you can even require a PIN code every time your SIM card is inserted into any phone. (To deactivate your PIN code, see

“Activate and Deactivate the SIM Card PIN Code” on page 144.) Store more public numbers, like business associates and travel agents in your phone’s memory.

72 Managing the Phone Book

*HWWLQJWR3HUVRQDO1XPEHUV

1.

Press

M

until you see

Phone Book

, and then press

O

.

2.

Press

M

to scroll to

Personal Numbers

, and then press

O

.

3.

Press

M

to scroll to one of the features described below.

Storing Names and Numbers

Add an Entry

Use the Options Menu

1. Follow the steps in “Getting to Personal

Numbers...” to get to

Add Entry

, and then press

O

.

2. Press

M

to scroll to

To SIM Card Memory

.

Add To Phone Memory

or

Add

3. Press

O

to select. You will see

Enter Number

.

4. Enter a number , and then press

O

. You will see

Enter Name

.

5. Enter a name (as described in “Entering

Names” on page 75), and then press

You will see

Enter Location

.

O

.

6. Enter a one-, two-, or three-digit location number (1-100 for phone memory or 101-255 for SIM memory*), and then press will see

Stored XXX

.

O

. You or

Press

O

to select the next available location. You will see

Stored XXX

.

7. Press and hold

C

to exit the menu.

Tip: Numbers should be entered in international format.

* SIM memory is dependent on your SIM card.

Managing the Phone Book 73

Tip: If you have more than one number for the same person, try attaching a descriptive tag to the name, like

Home

,

Office

, or

Mobile

.

Use the Dedicated Keys

1. Enter the phone number you want to store.

2. Press

I

to begin storing.

3. Press

M

to scroll to

Add To Phone Memory

or

Add

To SIM Card Memory

, and then press will see

O

. You

Enter Number

, followed by the number you entered.

4. Press

O

Enter Name

.

to accept the number. You will see

5. Enter a name (as described in “Entering

Names” on page 75), and then press

You will see

Enter Location

.

O

.

6. Enter a one-, two-, or three-digit location number , and then press

O

. You will see

Stored XXX

.

or

Press

O

to store the entry in the next empty memory location. You will see

Stored XXX

.

Adding Entry Messages

When you enter the location number for your entry, you may see one of these messages:

Message

Stored XXX

Range XXX XX

Overwrite?

Description

You have stored the entry.

You have chosen a memory location outside the appropriate range. Enter a new number within the range listed on the display.

You have chosen an occupied location. Press

O

to overwrite the location or press any other key to try another location.

74 Managing the Phone Book

Entering Names

You can use the keypad to produce any letter in the alphabet. For example, press

2

to enter the letters A, B, or C, as shown: press 1 time to insert an A press 2 times to insert a B press 3 times to insert a C press 4 times to insert a 2

Enter Characters

1. Enter a letter by pressing a key as many times as necessary.

2. Press

M

to advance the cursor.

3. Repeat steps 1 and 2 as many times as necessary, and then press

O

.

Correct an Entry

To delete a character:

1. Press

M

to scroll the cursor to the right of the character you want to delete.

2. Press

C

to delete one character at a time.

or

Press and hold

C

to clear the display.

To add a character:

1. Press

M

to scroll the cursor to the location where you want to add a character.

2. Enter a letter by pressing a key as many times as necessary.

Tip: Press and hold any numeric key to toggle between uppercase and lowercase characters.

Managing the Phone Book 75

Available Characters

Use this chart as a guide for producing characters:

1

2

3

4

5

6

7

8

9

0

Space . 1 ? ! , @ _ & : “ ( ) ‘ ¿ ¡ % £ $

Space . 1 ? ! , @ _ & : “ ( ) ‘ ¿ ¡ % £ $

A B C 2 Ä Å à Æ

β

Ç a b c 2 ä å à æ

β

Ç

D E F 3 d e f 3

∆

É è

Φ

∆

é è

Φ

G H I 4 g h i 4

Γ

ì

Γ

ì

J K L 5 j k l 5

Λ

Λ

M N O 6 Ñ Ö Ø Ò

Ω m n o 6 ñ ö ø ò

Ω

P Q R S 7

Π

ß

Σ p q r s 7

Π

ß

Σ

T U V 8 t u v 8

Θ

Ü ù

Θ

ü ù

W X Y Z 9

Ξ Ψ w x y z 9

Ξ Ψ

+ - 0 x * / = > < #

+ - 0 x * / = > < #

The upper line for each key shows the uppercase characters. The lower line for each key shows the lowercase characters.

76 Managing the Phone Book

Using Pauses in Numbers

When you call automated systems, a recorded message prompts you for numbers such as PIN numbers and account numbers. You can store these numbers in the same memory location as the automated system’s access number. Separate the numbers with “pauses”—special characters that tell your phone to wait a few seconds before sending additional numbers—and store the string in the same way you would other numbers.

Enter Pauses in Numbers

1. Enter the phone number you use to access the automated system.

2. Press and hold

*

. You will see a

¨

(pause) character inserted into the number entry.

3. Enter the next group of numbers . For example, enter your PIN number. If the automated system requires a * or #, enter those symbols, too.

4. Repeat steps 2 to 3 as many times as necessary.

5. To store the entry follow the procedures in

“Add an Entry” on page 73.

Tip: You can store 32 characters in a phone memory location, or 20 characters in a

SIM card memory location. A pause is equal to one character.

Managing the Phone Book 77

Tip: Your phone displays up to 32 digits

(two rows of 16 digits) when you enter a number with pauses.

Dial Numbers With Pauses

To dial a number with pauses:

1. Recall the entry . (See “Locating Entries” on page 80.)

2. Press

O

to place the call.

The first pause in the number waits until the call is answered. When the automated system answers, your phone waits a few seconds and then automatically sends the next set of numbers, then the next, until all numbers are sent.

78 Managing the Phone Book

Using Phone Number Prefixes

You can save time when you dial by storing the prefixes that you often use. This is sometimes called

“postscripting.” Your satellite phone allows you to change or add to Phone Book entries without overwriting them.

Store a prefix in your Phone Book just as you would any other number. See “Storing Names and

Numbers” on page 73.

Use a Stored Prefix

To use a stored prefix:

1. Recall the prefix from your Phone Book.

(See “Locating Entries” on page 80.)

2. Add the remaining numbers.

3. Press

O

to place the call.

Change Entry to a Similar Number

To change an entry to a similar number:

1. Recall the number from your Phone Book.

(See “Locating Entries” on page 80.)

2. Press

C to delete the unwanted digits.

3. Enter the replacement digits.

4. Press

O

to place the call.

Tip: Try naming the prefix by area, like

Downtown

,

Suburbs

, or

Germany

.

Managing the Phone Book 79

*HWWLQJWR3HUVRQDO1XPEHUV

1.

Press

M

until you see

Phone Book

, and then press

O

.

2.

Press

M

to scroll to

Personal Numbers

, and then press

O

.

3.

Press

M

to scroll to one of the features described below.

Locating Entries

Tip: Your phone sorts

SIM card memory and phone memory together alphabetically.

Tip: Use the

M

,

<

, or volume control keys to scroll through Phone

Book entries.

Find an Entry by Name

Search your Phone Book by the first few letters of the entry.

Note: If you have restricted access to either SIM card or phone memory and you are in satellite mode, those entries will not be available. For more information, see “Preventing Access to the Phone

Book” on page 84.

1. Follow the steps in “Getting to Personal

Numbers...” to get to

Find Entry By Name

, and then press

Name

.

O

to select. You will see

Enter

2. Enter one or more characters of the entry, and then press

O

. If necessary, scroll to the entry you are looking for.

3. Press

O

to access options for that entry, and then proceed to “Calling, Modifying, or

Erasing an Entry” on page 82.

80 Managing the Phone Book

*HWWLQJWR3HUVRQDO1XPEHUV

1.

Press

M

until you see

Phone Book

, and then press

O

.

2.

Press

M

to scroll to

Personal Numbers

, and then press

O

.

3.

Press

M

to scroll to one of the features described below.

Find an Entry by Location

Find an entry by its location number.

Use the Options Menu

1. Follow the steps in “Getting to Personal

Numbers...” to get to

Find Entry By Location

, and then press

Enter Location

.

O

to select. You will see

2. Enter the one-, two-, or three-digit location number , and then press

O

. You will see the entry displayed.

If you enter an empty location number, you will see

Location XXX is Empty

. Your phone then selects the next available location. If no numbers are stored, you will see

No Numbers

Stored

.

3. Press

O

to access options for that entry, and then proceed to “Calling, Modifying, or

Erasing an Entry” on page 82.

Use the Dedicated Keys

1. Press

Q

. You will see

Enter Location

.

2. Enter the one-, two-, or three-digit location number of the entry, and then press

O

. You will see the entry displayed.

If you enter an empty location number, you will see

Location XXX is Empty

. Your phone then selects the next available location.

3. Press

O

to call the displayed entry. You will see the number followed by

Calling

.

Managing the Phone Book 81

Calling, Modifying, or Erasing an Entry

Tip: For help entering letters or changing entries, see

“Entering

Names” on page 75.

Once you have selected a Phone Book entry, you can call, change, or erase that entry.

Call a Selected Entry

1. Find an entry , and then press

O

. (See

“Locating Entries” on page 80.)

2. Press

M

until you see

Call Number

, and then press

O

. You will see

Calling followed by the number you dialed.

Modify a Name or Number

1. Find an entry , and then press

O

. (See

“Locating Entries” on page 80.)

2. Press

M

until you see

Modify Name Or Number

, and then press

O

. You will see

Edit Number

, followed by the phone number stored in that entry.

3. Enter changes to the number, and then press

O

. You will see the name stored in that entry.

4. Enter changes to the name, and then press

O

. You will see

Modified XXX.

Erase a Name and Number

1. Find an entry , and then press

O

. (See

“Locating Entries” on page 80.)

2. Press

M

until you see

Erase Name And Number

, and then press

O

. You will see

Erased xxx

.

82 Managing the Phone Book

*HWWLQJWR3HUVRQDO1XPEHUV

1.

Press

M

until you see

Phone Book

, and then press

O

.

2.

Press

M

to scroll to

Personal Numbers

, and then press

O

.

3.

Press

M

to scroll to one of the features described below.

Checking Phone Book Capacity

Use this feature to see how many available memory locations you have in either SIM card memory or phone memory.

1. Follow the steps in “Getting to Personal

Numbers...” to get to

Check Capacity

, and then press

O

to select.

2. Press

M

until you see

Check Phone Capacity

Check SIM Capacity

, and then press will see

XXX Unused Locations

.

or

O

. You

3. Press and hold

C

to exit the menu.

Managing the Phone Book 83

Preventing Access to the Phone Book

Tip: The factory default security code is: 000000.

You may want to restrict memory access when loaning your phone to others. You can choose to prevent access to the phone memory, SIM memory, or both.

Caution: If you switch to cellular mode these restrictions will not apply.

1. Follow the steps in “Getting to Personal

Numbers...” to get to

Prevent Access

, and then press

O

to select.

2. Press

M

until you see the restriction type you desire:

No Memory Restrictions

,

To Phone

Memory

,

To SIM Card Memory

, or

To Phone & SIM

Memory

.

3. Press

O

to select the displayed option. You will see

Enter Security Code

.

4. Enter security code . Enter your six-digit security code. You will see

Completed

.

5. Press and hold

C

to exit the menu.

Note: If you restrict access to either phone memory or SIM memory and try to access an entry stored in that type of memory, you will see a list of the entries that are not restricted. If you prevent access to both your phone memory and SIM memory and then try to access an entry, you will see

Restricted

.

84 Managing the Phone Book

*HWWLQJWR)L[HG'LDOLQJ

1.

Press

M

until you see

Phone Book

, and then press

O

.

2.

Press

M

to scroll to

Fixed Dialing

, and then press

O

.

3.

Press

M

to scroll to one of the features described below.

Restricting Phone Use

You can restrict calling on your phone to a list of numbers that you create. When the fixed dialing feature is active, you can only call numbers or use prefixes (for example, country codes or area codes) that exactly match those stored in your fixed dial list.

You can store up to 40 entries on your list. These entries are stored on your SIM card.

Activate Fixed Dialing

Use this feature to activate fixed dialing. For instructions on how to store entries in the fixed dial list, see “Add an Entry” on page 86.

Note: The fixed dialing feature restricts access to your SIM memory.

1. Follow the steps in “Getting to Fixed

Dialing...” to get to

Setup Fixed Dialing

, and then press

PIN2

.

O

to select. You will see

Enter

2. Enter code . Enter your SIM card PIN2 code, and then press

O

.

3. Press press

M

until you see

On

or

Off

, and then

O

. You will see

Completed

.

4. Press and hold

C

to exit the menu.

Tip: You should have received your SIM card

PIN2 code from your service provider.

Managing the Phone Book 85

Tip: Phone numbers must be in international format.

Tip: See

“Entering

Names” on page 75 for help entering letters.

Add an Entry

To add an entry to the fixed dial list:

1. Follow the steps in “Getting to Fixed

Dialing...” to get to

Setup Fixed Dialing

, and then press

PIN2

.

O

to select. You will see

Enter

2. Enter code . Enter your SIM card PIN2 code, and then press

O

.

3. Press

M

until you see

Add Entry

, and then press

O

. You will see

Enter Number

.

4. Enter the number , and then press will see

Enter Name

.

O

. You

5. Enter the name , and then press see

Enter Location

.

O

. You will

6. Enter a location number , and then press

O

. You will see

Completed

.

7. Press and hold

C

to exit the menu.

86 Managing the Phone Book

*HWWLQJWR)L[HG'LDOLQJ

1.

Press

M

until you see

Phone Book

, and then press

O

.

2.

Press

M

to scroll to

Fixed Dialing

, and then press

O

.

3.

Press

M

to scroll to one of the features described below.

Erase an Entry

To erase an entry in the fixed dial list:

1. Follow the steps in “Getting to Fixed

Dialing...” to get to

Setup Fixed Dialing

, and then press

O

to select. You will see

Enter

PIN2

.

2. Enter code . Enter your SIM card PIN2 code, and then press

O

.

3. Press

M

until you see

Erase Entry

, and then press

O

to select. You will see the first entry in your fixed dial list.

4. Press

M

to scroll to the number you wish to erase. You will see

Erase?

.

5. Press

O

to confirm. You will see

Completed

.

6. Press and hold

C

to exit the menu.

Tip: You should have received your SIM card

PIN2 code from your service provider.

Managing the Phone Book 87

Edit an Entry

To edit an entry in the fixed dial list:

1. Follow the steps in “Getting to Fixed

Dialing...” to get to

Setup Fixed Dialing

, and then press

PIN2

.

O

to select. You will see

Enter

2. Enter code . Enter your SIM card PIN2 code, and then press

O

.

3. Press

M

until you see

Edit Entry

, and then press

O

to select. You will see the first entry in your fixed dial list.

4. Press

M

to scroll to the entry you want to change, and then press

O

. You will see the current number for that location.

5. Enter changes to the number, and then press

O

. You will see the current name for that location.

6. Enter changes to the name, and then press

O

. You will see the current location.

7. Enter a new location , and then press

You will see

Completed

.

O

.

8. Press and hold

C

to exit the menu.

88 Managing the Phone Book

*HWWLQJWR)L[HG'LDOLQJ

1.

Press

M

until you see

Phone Book

, and then press

O

.

2.

Press

M

to scroll to

Fixed Dialing

, and then press

O

.

3.

Press

M

to scroll to one of the features described below.

View Your Fixed Dialing List

This feature enables you to review, but not change, your fixed dial list.

1. Follow the steps in “Getting to Fixed

Dialing...” to get to

View Fixed Dial List

, and then press

O

to select. You will see the first number on your fixed dial list.

2. Press

M

to scroll through the numbers on your fixed dial list.

3. Press and hold

C

to exit the menu.

Managing the Phone Book 89

*HWWLQJWR3KRQH%RRN)HDWXUHV

1.

Press

M

until you see

Phone Book

, and then press

O

.

2.

Press

M

to scroll to one of the features described below. You will see the feature name, followed by

Select?

.

Viewing the Last Ten Calls Made or

Received

Tip: If you want to add a number from

Last Ten Calls to your Phone

Book, press

I when the number is displayed, then follow the steps in “Storing

Names and

Numbers” on page 73.

Your phone saves the last ten phone numbers you dialed. In cellular mode, your phone also saves the numbers of the last ten calls you have received.

To view the phone numbers of the last ten calls you have made:

1. Follow the steps in “Getting to Phone Book

Features...” to get to

Last Ten Calls

, and then press

O

to select.

2. Press

M

to scroll to

Last Calls Made

All Numbers

, and then press

or

Erase

O

to select.

3.

If you select

Last Calls Made

, press

M

to scroll to the number you are looking for, and then press

O

to place a call to that number.

or

If you select

Erase All Numbers

, you will see

Completed

.

4. Press and hold

C

to exit the menu.

90 Managing the Phone Book

Viewing and Modifying Your Phone

Numbers

View Your SIM Card Phone

Number(s)

You can program up to three phone numbers (such as your voice and data phone numbers) onto your

SIM card. Use this feature to view your phone number(s).

1. Follow the steps in “Getting to Phone Book

Features...” to get to

My Phone Number(s)

.

2. Press

O

to select.

You will see your phone’s voice phone number followed by

Modify?

.

3. Press

M

to scroll through your numbers.

4. Press and hold

C

to exit the menu.

Note: If you do not see your phone number(s), they have not been programmed onto your SIM card. You can program your voice phone number and other phone numbers onto your SIM card by following the steps described in “Modify Your Phone Number(s)” on page 92.

Tip: Pressing

Q #

also brings up your phone number.

Managing the Phone Book 91

*HWWLQJWR3KRQH%RRN)HDWXUHV

1.

Press

M

until you see

Phone Book

, and then press

O

.

2.

Press

M

to scroll to one of the features described below. You will see the feature name, followed by

Select?

.

Modify Your Phone Number(s)

Use this feature to modify or program your voice phone number onto your SIM card. You can also program other phone numbers (for example, a data phone number) onto your SIM card. You can have up to three phone numbers.

1. Follow the steps in “Getting to Phone Book

Features...” to get to

My Phone Number(s)

.

2. Press

O

to select.

You will see your phone’s voice phone number followed by

Modify?

.

3. Press

M

to scroll to the number you want to modify.

4. Press

O

to modify the number. You will see

Edit Number

followed by the number for the selected entry.

5. Enter changes to the number, and then press

O

. You will see

Edit Name

followed by the name for the entry selected.

6. Enter changes to the name (as described in

“Entering Names” on page 75) and then press

O

. You will see

Stored

.

7. Press and hold

C

to exit the menu.

92 Managing the Phone Book

Using One-Touch Dialing

One-touch dialing enables you to place calls instantly. You can choose to dial the phone numbers in the first nine memory locations in either your SIM memory, phone memory, or your fixed dial list. You choose which type of memory you want to be active with this feature.

Set Up One-Touch Dialing

To set the active memory for one-touch dialing:

1. Follow the steps in “Getting to Phone Book

Features...” to get to

One Touch Dial Setting

, and then press

O

to select.

2. Press

M

to scroll through

To Phone Memory

SIM Card Memory

, or

To Fixed Dial List

, and

,

To then press

O

to select the displayed option.

You will see

Completed

.

3. Press and hold

C

to exit the menu.

Managing the Phone Book 93

*HWWLQJWR3KRQH%RRN)HDWXUHV

1.

Press

M

until you see

Phone Book

, and then press

O

.

2.

Press

M

to scroll to one of the features described below. You will see the feature name, followed by

Select?

.

Tip: You do not need to press

O

to call the number when you use one-touch dialing.

Use One-Touch Dialing

To use one-touch dialing:

Press and hold the appropriate digit key.

For example, press and hold

2

to dial the number stored in location 2 of your phone memory, location

2 of your fixed dial list, or 302 of your SIM memory, depending on your setting.

94 Managing the Phone Book

Viewing Service Phone Numbers

The show services feature provides a read-only list of service phone numbers that are pre-programmed by your service provider. This list resides on the SIM card and allows for call placement only.

1. Follow the steps in “Getting to Phone Book

Features...” to get to

Show Services

.

2. Press

O

to select.

You will see a list of service phone numbers.

3. Press

M

to scroll to the number you are looking for.

4. Press

O

to place a call to that number.

or

Press and hold

C

to exit the menu.

Note: If you do not see any service dialing number(s), they have not been programmed onto your SIM card. Contact your service provider for more information.

Managing the Phone Book 95

96 Managing the Phone Book

Using Calling Features

This chapter describes call-related features. Many of these features are network features that you must subscribe to in order to access.

97

Call Related Features Menu

Call Related Features

Show Battery Meter

Show Signal Strength

Pending Call Drop

On/Off

Call Forwarding1

Forward When Unavailable

On/Off

Forward All Calls

On/Off

Detailed Forwarding2

Forward Voice Calls

Forward All Voice Calls

If Busy

On/Off

On/Off

If No Answer

On/Off

If Not Reachable

On/Off

Cancel All Forwarding

Call Waiting1

On/Off

Call Barring2

Bar Outgoing Calls

Intl Calls

Intl Calls Except Home

All Calls

On/Off

Bar Incoming Calls

When Roaming

All Calls

On/Off

Cancel All Barring

Change Bar Password

1 This feature is network and subscription dependent.

2 This feature is network and subscription dependent. It is available only when the extended menus are activated.

98 Using Calling Features

*HWWLQJWR&DOO)RUZDUGLQJ

1.

Press

M

until you see

Call Related Features

, and then press

O

.

2.

Press

M

to scroll to

Call Forwarding

, and then press

O

.

3.

Press

M

to scroll to one of the features described below.

Forwarding Calls When Unavailable

Use this feature when you are unable to answer your phone calls.

Note: You must subscribe to this network feature through your service provider. Contact your service provider for additional information.

To activate this feature:

1. Follow the steps in “Getting to Call

Forwarding...” to get to

Forward When

Unavailable

, and then press

O

to select.

Your phone takes a moment to request the current setting from the network.

2. Press

M

to scroll to

On

or

Off

, and then press

O

to select.

• If you select

On

, continue with step 3 .

• If you select

Off

, continue with step 5 .

3. Press

M

to scroll to

Voicemail

or

Other Number

, and then press

O

to select.

• If you select

Voicemail

, continue with step 5 .

• If you select

Other Number

, then you will see

Enter Number

. Continue with step 4 .

4. Enter the number you want calls forwarded to, and then press

O

.

5. Press and hold

C

to exit the menu.

Tip: If you have not yet stored a voicemail number, go to page 132 to learn how.

Using Calling Features 99

*HWWLQJWR&DOO)RUZDUGLQJ

1.

Press press

M

until you see

Call Related Features

, and then

O

.

2.

Press

3.

Press

M

to scroll to

Call Forwarding

, and then press

O

.

M

to scroll to one of the features described below.

Forwarding All Your Calls

Tip: If you have not yet stored a voicemail number, go to page 132 to learn how.

This feature forwards all of your calls to the number you choose. Your phone does not ring.

Note: You must subscribe to this network feature through your service provider. Contact your service provider for additional information.

To activate this feature:

1. Follow the steps in “Getting to Call

Forwarding...” to get to

Forward All Calls

, and then press

O

to select. Your phone takes a moment to request the current setting from the network.

2. Press

M

to scroll to either

On

or

Off

, and then press

O

to select.

• If you select

On

, your phone takes a moment to contact the network and update the setting. You will see

Call

Forward On

. Continue with step 3 .

• If you select

Off

, continue with step 5 .

3. Press

M

to scroll to and then press

Voicemail

O

to select.

or

Other Number

,

• If you select

Voicemail

, continue with step 5.

• If you select

Other Number

, then you will see

Enter Number

. Continue with step 4 .

100 Using Calling Features

4. Enter the number you want calls forwarded to, and then press

O

.

5. Press and hold

C

to exit the menu.

Using Calling Features 101

*HWWLQJWR&DOO)RUZDUGLQJ

1.

Press press

M

until you see

Call Related Features

, and then

O

.

2.

Press

3.

Press

M

to scroll to

Call Forwarding

, and then press

O

.

M

to scroll to one of the features described below.

Using Detailed Call Forwarding

This feature lets you select the specific situations when you want your calls forwarded. The

Forward

When Unavailable

and

Forward All Calls

features override the settings you select here.

Notes:

• You must subscribe to this network feature through your service provider. Contact your service provider for additional information.

• This feature is available only when the extended menus are activated. See

“Activating Extended Menus” on page 148.

Voice Calls

To forward voice calls:

1. Follow the steps in “Getting to Call

Forwarding...” to get to and then press

Detailed Forwarding

,

O

to select. Your phone takes a moment to request the current setting from the network.

2. Press

M

to scroll to then press

Forward Voice Calls

O

to select.

, and

3. Press

M

to scroll to the option you desire:

Forward All Voice Calls

,

If Busy

,

If No Answer

, or

If Not Reachable

.

102 Using Calling Features

4. Press

O

to select the displayed option. Your phone takes a moment to contact the network and update the setting. You will see

Call

Forward On

.

5. Press

M

to scroll to either

Voicemail

or

Other

Number

, and then press

O

.

• If you select

Voicemail

, continue with step 7 .

• If you select

Other Number

, then you will see

Enter Number

. Continue with step 6 .

6. Enter the number you want calls forwarded to, and then press

O

.

7. Press and hold

C

to exit the menu.

Tip: If you have not yet stored a voicemail number, go to page 132 to learn how.

Using Calling Features 103

*HWWLQJWR&DOO)RUZDUGLQJ

1.

Press press

M

until you see

Call Related Features

, and then

O

.

2.

Press

M

to scroll to

Call Forwarding

, and then press

O

.

3.

Press

M

to scroll to one of the features described below.

Canceling All Forwarding

This feature cancels all call forwarding settings.

Note: You must subscribe to this network feature through your service provider. Contact your service provider for additional information.

1. Follow the steps in “Getting to Call

Forwarding...” to get to

Cancel All Forwarding

, and then press

O

to select.

Your phone takes a moment to contact the network and update the setting. You will see

Call Forward Off

. All call forwarding settings are now set to

Off

.

2. Press and hold

C

to exit the menu.

104 Using Calling Features

*HWWLQJWR&DOO5HODWHG)HDWXUHV

1.

Press

M

until you see

Call Related Features

, and then press

O

.

2.

Press

M

to scroll to one of the features described below. You will see the feature name, followed by

Select?

.

Activating Call Waiting

If you subscribe to call waiting, use this feature to specify whether or not you want to be notified of incoming calls while you in a call.

Note: You must subscribe to this network feature through your service provider. Contact your service provider for additional information.

1. Follow the steps in “Getting to Call Related

Features...” to get to

Call Waiting

, and then press

O

to select.

2. Press

O

M

to scroll to

On

or

Off

, and then press

to select the desired option.

3. Press and hold

C

to exit the menu.

For information on using call waiting, see “Using Call

Waiting” on page 55.

Using Calling Features 105

Restricting Calls with Call Barring

You can use call barring to restrict both incoming and outgoing calls. Call barring is useful if you are loaning your phone to others or when you wish to control incoming calls. When you change one of your call barring settings, your phone takes a few seconds to request the setting from the network.

Notes:

• You must subscribe to this network feature through your service provider. Contact your service provider for additional information.

• This feature is available only when the extended menus are activated. See

“Activating Extended Menus” on page 148.

106 Using Calling Features

*HWWLQJWR&DOO%DUULQJ

1.

Press

M

until you see

Call Related Features

, and then press

O

.

2.

Press

M

to scroll to

Call Barring

, and then press

O

.

3.

Press

M

to scroll to one of the features described below. You will see the feature name, followed by

Select?

.

Bar Outgoing Calls

This feature enables you to receive incoming calls but prevents outgoing calls.

To bar outgoing calls:

1. Follow the steps in “Getting to Call

Barring...” to get to

Bar Outgoing Calls

, and then press

O

to select.

2. Press

M

to scroll to

Intl Calls

,

Intl Calls

Except Home

,

All Calls

, or

Off

, and then press

O

Password

.

to select. You will see

Enter

3. Enter your bar password , and then press

O

. You will see

Completed

.

4. Press and hold

C

to exit the menu.

Note: You cannot bar international calls.

Tip: Your service provider gives you a bar password.

Using Calling Features 107

Bar Incoming Calls

This feature allows you to place calls, but refuses incoming calls. Callers hear a recording telling them that you are unavailable. To be sure not to miss a call, see “Using Detailed Call Forwarding” on page 102.

To bar incoming calls:

1. Follow the steps in “Getting to Call

Barring...” to get to

Bar Incoming Calls

, and then press

O

to select.

2. Press or

M

to scroll to

Off

, and then press see

Enter Password

.

When Roaming

,

All Calls

,

O

to select. You will

3. Enter your bar password , and then press

O

. You will see

Completed

.

4. Press and hold

C

to exit the menu.

108 Using Calling Features

*HWWLQJWR&DOO%DUULQJ

1.

Press

M

until you see

Call Related Features

, and then press

O

.

2.

Press

M

to scroll to

Call Barring

, and then press

O

.

3.

Press

M

to scroll to one of the features described below. You will see the feature name, followed by

Select?

.

Cancel All Barring

To cancel all call barring settings:

1. Follow the steps in “Getting to Call

Barring...” to get to

Cancel All Barring

, and then press

Password

.

O

to select. You will see

Enter

2. Enter your bar password , and then press

O

. You will see

Call Barring Off call barring settings are now set to

Off

.

. All

3. Press and hold

C

to exit the menu.

Using Calling Features 109

Tip: If you are changing the password for the first time, use the password supplied by your service provider.

Change Bar Password

When you subscribe to call barring, your service provider gives you a four-digit bar password. Use this feature to change it to something easy to remember.

1. Follow the steps in “Getting to Call

Barring...” to get to

Change Bar Password

, and then press

Password

.

O

to select. You will see

Enter

2. Enter your bar password , and then press

O

. You will see

Enter New Password

.

3. Enter the new bar password , and then press

O

.

4. Enter the new bar password again to confirm, and then press

O

.

5. Press and hold

C

to exit the menu.

110 Using Calling Features

*HWWLQJWR&DOO5HODWHG)HDWXUHV

1.

Press

M

until you see

Call Related Features

, and then press

O

.

2.

Press

M

to scroll to one of the features described below. You will see the feature name, followed by

Select?

.

Viewing the Battery Meter

Use this feature to check the charge level on your battery.

1. Follow the steps in “Getting to Call Related

Features...” to scroll to

Show Battery Meter

, and the press

O

to select.

You will see the battery meter:

Battery

Quit?

Battery

Quit?

Low Charge High Charge

You may also see one of the following messages:

Message Description

Not Available The battery meter doesn’t appear because a battery is not installed.

Charging Battery

The battery is being charged.

Fast Charge

Completed

The battery has completed charging.

Invalid Batt.

You have an unapproved battery inserted in your phone.

2. Press and hold

C

to exit.

Using Calling Features 111

Viewing Signal Strength

Use this feature to check the strength of the signal that your phone is receiving from the Iridium satellite network.

1. Follow the steps in “Getting to Call Related

Features...” to get to

Show Signal Strength

.

2. Press

O

to select. You will see

Checking

Signal...

.

If the antenna is not rotated, you will see

Rotate and Extend Antenna

. Rotate and extend the antenna to continue.

The signal strength indicator is located in the upper left corner of the display: rx

Signal strength is sampled every four to five seconds; the indicator shows the average strength for the last three samples. The more segments displayed in the bar graph, the stronger the signal. Five bars indicate full signal strength. The indicator shows the tower icon but no bars when the signal is weak.

3. Press and hold

C

to exit the menu.

112 Using Calling Features

*HWWLQJWR&DOO5HODWHG)HDWXUHV

1.

Press

M

until you see

Call Related Features

, and then press

O

.

2.

Press

M

to scroll to one of the features described below. You will see the feature name, followed by

Select?

.

Deactivating Pending Call Drop Signal

Under rare circumstances, due to system overcapacity or a satellite outage, a satellite may not be available to take your call. When this happens, your phone notifies you with a series of three consecutive tones and displays

Pending Call Drop

.

The tones continue periodically until a new satellite moves into range or the call is dropped.

To activate or deactivate the alert tones:

1. Follow the steps in the “Getting to Call

Related Features...” to get to

Pending Call

Drop

, and then press

O

to select.

2. Press

M

to scroll to either

On

or

Off

, and then press

O

to select.

3. Press and hold

C

to exit the menu.

Using Calling Features 113

114 Using Calling Features

Using Message Services

You can receive voicemail notification messages, and send and receive numeric and text messages through your Personal Mailbox service— around the world. Wherever you are, you can have instant reference to all your communication.

115

Messages Menu

Messages

Call Voicemail

Received Messages

Delete Message

Return Call1

Edit Message2

Send Message

Store Message

Go to Next Message

Outgoing Messages2

(first message)

Send Message

Edit Message

Send Message

Store Message

Delete Message

Go to Next Message

Message Editor2

Send Message

Store Message

Message Settings

Voicemail Number

Service Center2

Expiry Period2

Outgoing Message Type2

Text

1 This feature is network and subscription dependent.

2 This feature is network and subscription dependent. It must be activated by your service provider.

116 Using Message Services

*HWWLQJWR0HVVDJH)HDWXUHV

1.

Press

?

to go directly to the Messages menu.

or

Press

M

until you see

Messages

, and then press

O

.

2.

Press

M

to scroll to one of the features described below. You will see the feature name, followed by

Select?

.

Checking Your Voicemail

This feature makes checking your voicemail simple.

1. Follow the steps in “Getting to Message

Features...” to get to

Call Voicemail

.

2. Press

O

to select. You will see your voicemail number followed by

Calling

.

If you have not previously stored a voicemail number, then you will see

No Number Available

. See

“Store Your Voicemail Number” on page 132 for instructions on how to enter a voicemail number.

Using Message Services 117

Managing Your Received Messages

How Your Phone Notifies You of

Messages

If your phone is powered on, it notifies you of received messages in the following ways:

• An alert sounds and/or the phone vibrates.

Your phone beeps and/or vibrates three times to inform you of an incoming message. (See page 140 for instructions on how to set your phone’s alert.)

• The o

(message) indicator is displayed.

• The message is displayed immediately and remains on the display for several seconds.

or

Message Read Now?

is displayed if the message is an alphanumeric text message of up to 160 characters. For more information see “Read a

New Message” on page 120.

How Messages Are Stored

Your phone stores all messages on your SIM card.

The total number of messages that you can store depends on your service provider.

If the message indicator is flashing, your SIM card is full. See “Delete a Message” on page 122 to make room for the new message.

118 Using Message Services

What Messages Contain

You can receive short text or numeric messages in your Personal Mailbox. Text messages may contain up to 160 characters. Numeric messages—typically phone numbers—may contain up to 20 digits.

Your personal mailbox works along with Call

Forwarding. For more information see “Personal

Mailbox” on page 49, and the Call Forwarding feature descriptions on pages 99-104.

Messages contain multiple screens with the following information:

• the message

• the date and time the message was sent

• the phone number (if available) from which the message was sent

Using Message Services 119

Accessing Received Messages

Read a New Message

Notification Messages

An incoming voicemail notification message automatically scrolls across your screen. You can:

• Press

O

to store it on your SIM card.

• Press

C

to delete it.

Text Messages

When you receive a new alphanumeric message, you will see

Message Read Now?

To read it:

1. Press

O

and continue with step 2 .

or

Press

C

to read the message later. See

“Read a Stored Message” on page 121.

2. Press

M

to move forward through a message one screen at a time.

3. Press

O

to access menu options for the message. These options are described on pages 122-123.

Note:

• If the message storage space on your SIM card is full, you will not be able to store a message for later retrieval. Use the delete message feature (page 122) to make room for new messages on your SIM card.

120 Using Message Services

*HWWLQJWR5HFHLYHG0HVVDJHV

1.

Press

?

to go directly to the Messages menu.

or

Press

M

until you see

Messages

, and then press

O

.

2.

Press

M

to scroll to

Received Messages

, and then press

O

.

3.

Press

M

to scroll to one of the features described below.

Read a Stored Message

To read a stored message that you have received:

1. Follow the steps in “Getting to Received

Messages...” to enter the message center.

You will see the number of messages stored, followed by the first message. If you do not have any messages, you will see

No Messages

.

2. Press

M

to scroll through the message one screen at a time.

3. Press

O

to access menu options for the message.

or

Press and hold

C

to exit the menu.

Using Message Services 121

Go to the Next Message

To go to the next message:

1. Follow the steps in “Read a Stored

Message” on page 121.

2. Press

M

until you see

Go To Next Message

and then press

O

. You will see the next message. If you are at the end of your message list you will see the first message again.

3. Press

M

to scroll through the message one screen at a time.

4. Repeat steps 2 to 3 to read all of your messages.

5. Press and hold

C

to exit the menu.

Delete a Message

Use this feature to make room for new messages on your SIM card.

1. Follow the steps in “Go to the Next

Message” (above) until you see the message you want to delete, and then press

O

.

2. Press

M

until you see then press

Delete Message

, and

O

. You will see

Message Deleted

.

3. Press and hold

C

to exit the menu.

122 Using Message Services

Return a Call

A callback number appears in quotes within the received message. If one is enclosed, you can instantly place a call to that number. If a callback number is not included, your phone selects the first number in the message.

Note: You must subscribe to this network feature through your service provider. Contact your service provider for additional information.

1. Follow the steps in “Go to the Next

Message” on page 122 to display the desired message, and then press

O

.

2. Press

M

until you see

Return Call

.

3. Press

O

to place a call to that number. You will see the number followed by

Calling

.

Edit a Stored Message

You can edit a message that you have received, then send the modified message and/or store it in the outgoing messages list.

1. Follow the steps in “Go to the Next

Message” on page 122 until you see the message you want to edit, and then press

O

.

2. Press

M

until you see

Edit Message

and then press

O

.

The message is copied to the message editor. You will see the final portion of the message displayed in the editing area. The cursor is placed at the end of the message.

For instructions on how to edit a message, see

“Message Editor” on page 124.

Using Message Services 123

*HWWLQJWR0HVVDJH)HDWXUHV

1.

Press

?

to go directly to the Messages menu.

or

Press

2.

Press

M

until you see

Messages

, and then press

O

.

M

to scroll to one of the features described below. You will see the feature name, followed by

Select?

.

Managing Outgoing Messages

You can create a new message and send it immediately, or store it in an outgoing messages list for later use. You can also edit a message that you have received, then send and/or save the modified message. Messages are created and edited in the message editor.

Message Editor

The message editor lets you create a new message or modify a (received or outgoing) stored message.

You use the keypad to create or edit a message. You can produce any letter in the alphabet by pressing the appropriate key. For example, press

2

to enter the letters A, B, or C, as shown: press 1 time to insert an A press 2 times to insert a B press 3 times to insert a C press 4 times to insert a 2

For a complete list of the characters you can enter from the keypad, see page 76.

Note: This feature must be activated by your service provider. Contact your service provider for additional information.

124 Using Message Services

Create a New Message

To create a new message in the message editor:

1. Follow the steps in “Getting to Message

Features...” to get to

Message Editor

, and then press

O

to select.

The message editor displays the contents of the last message entered. If there are no previous messages, the cursor is placed in the upper left corner of the editing area.

2. Press and hold

C

to clear the entire message editor contents, if necessary.

3.

Begin composing your message. Enter a letter by pressing a key as many times as necessary.

4. Press

M

to advance the cursor.

5. Repeat steps 3 and 4 as many times as necessary to complete your message.

Lines of text are automatically formatted in the display. When you reach the bottom of the editing area, the top lines of text scroll up and off the display in order to keep the cursor and the last few lines of text in view.

When you have finished composing your message:

6. Press

O

to access options for that entry.

Message editor menu options let you send the message immediately or store it for later use. These options are described on pages 126-127.

Tip: Press and hold any numeric key to toggle between uppercase and lowercase characters.

Using Message Services 125

Edit a Message

You can edit a new message at any time while you are creating it.

You can also edit received messages or messages stored in the outgoing messages list. See “Edit a

Stored Message” on page 123 for instructions on how to copy a received message into the message editor. See “Edit a Stored Message” on page 130 for instructions on how to copy an outgoing message into the message editor.

To delete text in a message:

1. Press

M

to scroll the cursor to the right of the text you want to delete.

2. Press

C

to delete one character at a time.

or

Press and hold

C

to clear the display.

To add text to a message:

1. Press

M

to scroll the cursor to the location where you want to add new text.

2. Enter a letter by pressing a key as many times as necessary.

Send a Message

To send a message from the message editor:

1. Press

O

to access message editor menu options.

2. Press

M

until you see

Send Message

and then press

O

. You will be prompted to enter the destination address (phone number) for the message.

3. Enter the destination address and then press

O

to send the message.

126 Using Message Services

The message is sent to your message service center, which forwards the message to its final destination. You will see

Message Sent

when the message arrives at the service center.

If the message cannot be delivered to the service center, you will see

Message Failed

, followed by

Resend?

on the next line. You can:

Press

O

to resend the message.

or

Press

C

to abandon the attempt to send the message at this time. See “Store a Message” on page 127 for instructions on how to store the message for later mailing.

If you have not previously stored a service center number, then you will see

No Service Center

. See

“Enter Service Center Number” on page 133 for instructions on how to enter a service center number.

Store a Message

To store the contents of the message editor to the outgoing messages list:

1. Press

O

to access message editor menu options.

2. Press

M

until you see

Store Message

and then press

O

. You will see

Stored to Outgoing

.

Outgoing messages are stored on your SIM card.

When the SIM card is full (indicated by a flashing message indicator), you will not be able to store a message for later retrieval. Use the delete message feature (page 131) to make room for new messages on your SIM card.

Using Message Services 127

*HWWLQJWR2XWJRLQJ0HVVDJHV

1.

Press

?

to go directly to the Messages menu.

or

Press

2.

Press

M

until you see

Messages

, and then press

O

.

M

to scroll to

Outgoing Messages

, and then press

O

.

3.

Press

M

to scroll to one of the features described below.

Read a Stored Message

This feature displays the first message stored in the outgoing messages list.

Note: This feature must be activated by your service provider. Contact your service provider for additional information.

To read a stored message:

1. Follow the steps in “Getting to Outgoing

Messages...” to enter the message center.

You will see the number of messages stored, followed by the first message. If you do not have any messages, you will see

No Messages

.

2. Press

M

to scroll through the message one screen at a time.

3. Press

O

to access menu options for the message.

or

Press and hold

C

to exit the menu.

Go to the Next Message

This feature takes you to the next message in the outgoing messages list.

Note: This feature must be activated by your service provider. Contact your service provider for additional information.

128 Using Message Services

To go to the next message:

1. Follow the steps in “Read a Stored

Message” on page 128.

2. Press

M

until you see

Go To Next Message

and then press

O

. You will see the next message.

3. Press

M

to scroll through the message one screen at a time.

4. Repeat steps 2 to 3 to read all of your messages.

5. Press and hold

C

to exit the menu.

Send a Stored Message

This feature sends a message stored in the outgoing messages list.

Note: This feature must be activated by your service provider. Contact your service provider for additional information.

To send a stored message:

1. Follow the steps in “Read a Stored

Message” on page 128.

2. Press

M

until you see

Send Message

and then press

O

. You will be prompted to enter the destination address (phone number) for the message.

3. Enter the destination address and then press

O

to send the message.

The message is sent to your message service center, which forwards the message to its final destination. You will see

Message Sent

when the message arrives at the service center.

Using Message Services 129

If the message cannot be delivered to the service center, you will see

Message Failed

, followed by

Resend?

on the next line. You can:

Press

O

to resend the message.

or

Press

C

to abandon the attempt to send the message at this time.

If you have not previously stored a service center number, then you will see

No Service Center

. See

“Enter Service Center Number” on page 133 for instructions on how to enter a service center number.

Edit a Stored Message

You can edit a message that you have stored in the outgoing messages list.

Note: This feature must be activated by your service provider. Contact your service provider for additional information.

To edit a stored message:

1. Follow the steps in “Go to the Next

Message” on page 128 until you see the message you want to edit, and then press

O

.

2. Press

M

until you see

Edit Message

and then press

O

.

The message is copied to the message editor. You will see the final portion of the message displayed in the editing area. The cursor is placed at the end of the message.

For instructions on how to edit a message, see

“Message Editor” on page 124.

130 Using Message Services

Delete a Stored Message

Use this feature to make room for new messages on your SIM card.

Note: This feature must be activated by your service provider. Contact your service provider for additional information.

To delete a stored message:

1. Follow the steps in “Go to the Next

Message” on page 128 until you see the message you want to delete, and then press

O

.

2. Press

M

until you see

Delete Message

, and then press

O

. You will see

Message Deleted

.

3. Press and hold

C

to exit the menu.

Using Message Services 131

*HWWLQJWR0HVVDJH6HWWLQJV

1.

Press

?

to go directly to the Messages menu.

or

Press

2.

Press

M

until you see

Messages

, and then press

O

.

M

to scroll to

Message Settings

, and then press

O

.

3.

Press

M

to scroll to one of the features described below.

Managing Other Message Settings

Tip: Use pause dialing to store your voicemail access and PIN numbers together. See

“Using Pauses in Numbers” on page 77.

Store Your Voicemail Number

To store a voicemail number:

1. Follow the steps in “Getting to Message

Settings...” to get to

Voicemail Number

, and then press

O

to select. You will see

Enter

Voicemail Number

followed by your current voicemail number. If this is the first time you have stored a number, continue with step 3 .

2. Press

O

to select

Voicemail Number

.

Press

C

to clear one digit at a time, or press and hold

C

to erase the entire number.

3. Enter the new number , and then press

O

.

You will see

Completed

.

4. Press and hold

C

to exit the menu.

132 Using Message Services

Enter Service Center Number

Use this feature to enter the number for the service center that forwards your outgoing messages. You must specify a service number before you can send any messages.

Note: This feature must be activated by your service provider. Contact your service provider for additional information.

To enter the service center number:

1. Follow the steps in “Getting to Message

Settings...” to get to

Service Centre

, and then press

O

to select. You will see

Enter Service

Number

followed by your current service center number. If this is the first time you have stored a number, continue with step 3 .

2. Press

C

to clear one digit at a time, or press and hold

C

to erase the entire number.

3. Enter the new number , and then press

You will see

Completed

.

O

.

4. Press and hold

C

to exit the menu.

Tip: The service center number is normally provided by your service provider.

Using Message Services 133

*HWWLQJWR0HVVDJH6HWWLQJV

1.

Press

?

to go directly to the Messages menu.

or

Press

2.

Press

M

until you see

Messages

, and then press

O

.

M

to scroll to

Message Settings

, and then press

O

.

3.

Press

M

to scroll to one of the features described below.

Tip: The default expiration period setting is

24 hours.

Set Expiry period

This feature specifies the maximum amount of time, in hours, that an unforwarded outgoing message will remain at the service center before it is deleted.

Note: This feature must be activated by your service provider. Contact your service provider for additional information.

To set the message expiration period:

1. Follow the steps in “Getting to Message

Settings...” to get to

Expiry Period

, and then press

O

to select. You will see

Enter Hours followed by the current setting.

2. Press

C

to clear one digit at a time, or press and hold

C

to erase the entire number.

3. Enter the new number , and then press

O

.

You will see

Hours

followed by the number you entered.

4. Press and hold

C

to exit the menu.

134 Using Message Services

Specify Outgoing Message Type

You can send messages to a device which interprets them in a format other than text. Your service center converts the messages before forwarding them to the destination address.

Note: This feature must be activated by your service provider. Contact your service provider for additional information.

To specify the outgoing message type:

1. Follow the steps in “Getting to Message

Settings...” to get to

Outgoing Message Type

, and then press

O

to select.

2. Press

M

to scroll to the desired type, and then press

O

to select it.

3. Press and hold

C

to exit the menu.

Using Message Services 135

136 Using Message Services

Customizing Phone Features

Once you are comfortable with the basic features of your new phone, use the Phone Setup menu to configure your phone the way you like it.

137

Phone Setup Menu

Phone Setup

Emergency Mapping2

Intl Dialing Prefix2

Change Number2

System Scan2

Std A/B

Scan B/A

Std B/A

Scan A/B

Scan A

Scan B

Home Only

Preferred SIDs

System Options2

Display SID

Roam List Version2

Adjust Ring Volume

Ring or Vibrate

Ring Only

Vibrate Only

Vibrate Then Ring

No Ring or Vibrate

Set Ringer Tone

Standard Tone

The following Phone Setup menu items are available only when the extended menus are activated.

Show Time and Date1

Show Home Time + Date

Show Away Time + Date

Change Clock Display

Home Time

Away Time

Set Time and Date1

Set Home Time + Date

Set Away Time + Date

Set Time Format1

12 Hour

24 Hour

Language Selection1

English

High Tone

Phone Lock

Automatic Lock

On/Off

Lock Now

Change Unlock Code

Activate IR Port2

On/Off

Require SIM Card PIN

On/Off

Change SIM PIN Code

Change SIM PIN2 Code

New Security Code

Extended Menus

On/Off

Türkçe

Lights1

On/Off

Select Keypad Tones1

Normal Tones

Single Tone

No Tones

Phone Status1

Status Review

Master Reset

Master Clear

1 This feature is available only when the extended menus are activated.

2 This feature is not currently supported.

138 Customizing Phone Features

*HWWLQJWR3KRQH6HWXS

1.

Press

M

until you see

Phone Setup

, and then press

O

.

2.

Press

M

to scroll to one of the features described below. You will see the feature name, followed by

Select

?.

Managing Phone Ringer Settings

You can adjust your phone’s ringer volume and tone, and set the phone to ring or vibrate to notify you of incoming calls.

Adjust the Ringer Volume

Use this feature to adjust the volume of the ringer.

The phone sounds the new volume level as you adjust it.

1. Follow the steps in “Getting to Phone

Setup...” to get to

Adjust Ring Volume

, and then press

O

to select.

2. Increase the volume by pressing the upper volume control key.

or

Decrease the volume by pressing the lower volume control key.

3. Press and hold

C

to exit the menu.

Tip: You can also press

E

, and then the up or down volume control key.

Customizing Phone Features 139

Tip: If you select

Vibrate then Ring

, your phone vibrates for two cycles, and then rings.

Set the Phone to Ring or Vibrate

This feature is ideal for situations where a ringing phone is inappropriate or in noisy places where you might not hear the ringer. The VibraCall

®

alert function notifies you of incoming calls by discreet vibrations.

1. Follow the steps in “Getting to Phone

Setup...” to get to

Ring or Vibrate

, and then press

O

to select.

2. Press

M

to scroll to

Ring Only

,

Vibrate Only

,

Vibrate then Ring

, or

No Ring or Vibrate

, and then press

You will see

O

to select the displayed option.

Completed

.

3. Press and hold

C

to exit the menu.

Set the Ringer Tone

Select your favorite tone from 10 different options.

1. Follow the steps in “Getting to Phone

Setup...” to get to

Set Ringer Tone

, and then press

O

to select.

2. Press

M

to scroll through the ringer tone options. You will hear a one-ring-cycle demonstration of each tone as its name is displayed.

3. Press

O

to select the desired ringer tone.

4. Press and hold

C

to exit the menu.

140 Customizing Phone Features

*HWWLQJWR3KRQH/RFN

1.

Press

M

until you see

Phone Setup

, and then press

O

.

2.

Press

M

to scroll to

Phone Lock

, and then press

O

.

3.

Press

M

to scroll to one of the features described below.

Locking and Unlocking Your Phone

These features can help you prevent unwanted use of your phone.

Lock the Phone Automatically

Use this feature to set your phone to lock itself every time it is powered on.

1. Follow the steps in “Getting to Phone

Lock...” to get to

Automatic Lock

, and then press

O

to select.

2. Press

M

to choose

On

or

Off

, and then press

O

to select. You will see

Completed

.

3. Press and hold

C

to exit the menu.

Lock the Phone Instantly

Use this feature to lock your phone immediately.

1. Follow the steps in “Getting to Phone

Lock...” to get to

Lock Now

.

2. Press

O

to select. You will see:

Locked

.

Note: Once you unlock your phone, it remains unlocked until you lock it again.

Unlock the Phone

1. Enter unlock code.

Enter your four-digit phone unlock code.

2. Press

O

.

Tip: The factory default unlock code is

1234.

Customizing Phone Features 141

Tip: The factory default security code is

000000.

Change the Unlock Code

The unlock code is originally set to 1234. You should change it as soon as possible.

1. Follow the steps in “Getting to Phone

Lock...” to get to

Change Unlock Code

, and then press

O

to select. You will see

Enter

Security Code

.

2. Enter security code.

Enter your six-digit security code. You will see your current lock code and

Enter Phone Unlock Code

.

3. Press

C

to clear one digit at a time, press and hold or

C

to clear all the digits.

4. Enter new code . Enter a new four-digit unlock code, and then press

P

O

. You will see hone Lock

and the new lock code.

5. Press and hold

C

to exit the menu.

142 Customizing Phone Features

*HWWLQJWR3KRQH6HWXS

1.

Press

M

until you see

Phone Setup

, and then press

O

.

2.

Press

M

to scroll to one of the features described below. You will see the feature name, followed by

Select

?.

Activating the Infrared Data Port

Note: This feature is not currently supported.

Customizing Phone Features 143

*HWWLQJWR5HTXLUH6,0&DUG3,1

1.

Press

M

until you see

Phone Setup

, and then press

O

.

2.

Press

M

to scroll to

Require SIM Card PIN

, and then press

O

.

3.

Press

M

to scroll to one of the features described below. You will see the feature name, followed by

View Options?

.

Protecting the SIM Card

Tip: You should have received your SIM card

PIN code from your service provider.

You can use a Personal Identification Number (PIN) code to protect the information stored on your SIM card even when it is inserted into someone else’s phone.

Activate and Deactivate the SIM

Card PIN Code

When you activate the SIM card PIN code, your phone requests the code whenever the phone is powered on. To change this setting, you need to enter the PIN code that your service provider gave you.

1. Follow the steps in “Getting to Require SIM

Card PIN...”.

2. Press

M

to scroll to

On

or

Off

, and then press

O

. You will see

Enter PIN

.

3. Enter code.

Enter your four- to eight-digit SIM card PIN code, and then press

O

. You will see

Completed

.

4. Press and hold

C

to exit the menu.

144 Customizing Phone Features

*HWWLQJWR5HTXLUH6,0&DUG3,1

1.

Press

M

until you see

Phone Setup

, and then press

O

.

2.

Press

M

to scroll to

Require SIM Card PIN

, and then press

O

.

3.

Press

M

to scroll to one of the features described below. You will see the feature name, followed by

View Options?

.

Change the SIM Card PIN Code

To choose your own PIN code:

1. Follow the steps in “Getting to Require SIM

Card PIN...” to get to

Change SIM Card PIN

, and then press

O

to select. You will see

Enter Old PIN

.

2. Enter the current PIN code , and then press

O

. You will see

Enter New PIN

.

3. Enter a new PIN code , and then press

You will see

Repeat New PIN

.

O

.

4. Re-enter the new PIN code , and then press

O

again. You will see

Completed

.

5. Press and hold

C

to exit the menu.

Unblock the PIN Code

If your PIN code is entered incorrectly three times in a row,

Blocked

appears in the display. You need to enter a PIN unblocking key (PUK1), which you can obtain from your service provider.

1. Press

* * 0 5 *

.

2. Enter unblocking key.

Enter the eight-digit

PUK1 unblocking key, and then press

O

.

Your service provider supplies this code.

3. Enter a new PIN code , and then press

O

.

4. Re-enter the new PIN code , and then press

O

.

Tip: The message

Blocked indicates that an incorrect

PIN code was entered. The message

!

Blocked indicates that an incorrect

PIN2 code was entered.

Customizing Phone Features 145

*HWWLQJWR3KRQH6HWXS

1.

Press

M

until you see

Phone Setup

, and then press

O

.

2.

Press

M

to scroll to one of the features described below. You will see the feature name, followed by

Select?

.

Managing Other Security Settings

Tip: You should have received your SIM card

PIN2 code from your service provider.

Your phone includes other security features:

• a SIM card PIN2 code for accessing fixed dialing settings and other subscription-dependent features

• a security code controls access to security and other menu options

Change the SIM Card PIN2 Code

Your SIM card PIN2 code is used to access fixed dialing settings. This four- to eight-digit code is issued to you when you subscribe to the feature.

Use this feature to choose a new code.

1. Follow the steps in “Getting to Phone

Setup...” to get to

Change SIM PIN2 Code

, and then press

Old PIN2

.

O

to select. You will see

Enter

2. Enter the current PIN2 code , and then press

O

. You will see

Enter New PIN2

.

3. Enter new PIN2 code , and then press

You will see

Repeat New PIN

.

O

.

4. Re-enter the new PIN2 code , and then press

O

again. You will see

Completed

.

5. Press and hold

C

to exit the menu.

146 Customizing Phone Features

*HWWLQJWR3KRQH6HWXS

1.

Press

M

until you see

Phone Setup

, and then press

O

.

2.

Press

M

to scroll to one of the features described below. You will see the feature name, followed by

Select?

.

Unblock the PIN2 Code

If your PIN2 code is entered incorrectly three times in a row,

!

Blocked

appears in the display. You need to enter a PIN2 unblocking key (PUK2), which you can obtain from your service provider.

1. Press

* * 0 5 2 *

.

2. Enter unblocking key.

Enter the eight-digit

PUK2 unblocking key, and then press

O

.

Your service provider supplies this code.

3. Enter a new PIN2 code , and then press

O

.

4. Re-enter the new PIN2 code , and then press

O

.

Change the Security Code

The security code is your phone’s primary security number. You use it to reset your phone to its default settings and prevent access to your phone book. It is originally set to 000000.

1. Follow the steps in “Getting to Phone

Setup...” to get to

New Security Code

, and then press

O

to select. You will see

Security Code

.

Enter

2. Enter the current security code , and then press

Code

.

O

. You will see

Enter New Security

3. Enter a new security code , and then press

O

. You will see

Secur

.

Code

and the six-digit number selected.

4. Press and hold

C

to exit the menu.

Customizing Phone Features 147

Activating Extended Menus

This feature activates and deactivates the extended menus. See “Personalizing the Options Menu” on page 176 to learn how extended menus can make your phone even simpler to use.

1. Follow the steps in “Getting to Phone

Setup...” to get to

Extended Menus

, and then press

O

to select.

2. Press

M

to choose

On

or

Off

, and then press

O

.

3. Press and hold

C

to exit the menu.

When extended menus are deactivated, you can activate them temporarily to access hidden features.

Press and hold

M

to activate the extended menus temporarily. This shortcut displays all extended menus features until you exit the Options menu.

148 Customizing Phone Features

*HWWLQJWR3KRQH6HWXS

1.

Press

M

until you see

Phone Setup

, and then press

O

.

2.

Press

M

to scroll to one of the features described below. You will see the feature name, followed by

Select?

.

Managing Time and Date Settings

View the Time and Date

Use this feature to view the current time and date in one of two time zones.

Note: This feature is available only when the extended menus are activated. See “Activating

Extended Menus” on page 148.

1. Follow the steps in “Getting to Phone

Setup...” to get to

Show Time and Date

, and then press

O

to select.

2. Press

M

to choose

Show Home Time + Date

Show Away Time + Date

, and then press

O

.

or

The selected time and date are displayed.

3. Press any key to clear the time and date from the display and return to the menu.

4. Press and hold

C

to exit the menu.

Customizing Phone Features 149

Change the Time Displayed

Use this feature to determine which time is displayed on your real time clock indicator.

Note: This feature is available only when the extended menus are activated. See “Activating

Extended Menus” on page 148.

1. Follow the steps in “Getting to Phone

Setup...” to get to press

Show Time and Date

, and then

O

to select.

2. Press

M

to scroll to

Change Clock

, and then press

O

.

3. Press

M

to scroll to either

Time

, and then press

Home Time

O

to select.

or

Away

4. Press and hold

C

to exit the menu.

Set the Time Format

You can choose a12-hour or 24-hour time format.

Note: This feature is available only when the extended menus are activated. See “Activating

Extended Menus” on page 148.

1. Follow the steps in “Getting to Phone

Setup...” to get to

Set Time Format

, and then press

O

.

2. Press

M

to choose either

12 hour

or

24 hour

, and then press

O

to select.

3. Press and hold

C

to exit the menu.

150 Customizing Phone Features

*HWWLQJWR3KRQH6HWXS

1.

Press

M

until you see

Phone Setup

, and then press

O

.

2.

Press

M

to scroll to one of the features described below. You will see the feature name, followed by

Select?

.

Set the Time and Date

To make it easy to check the local time when you travel, your phone can save the current time and date for two different time zones.

Note: This feature is available only when the extended menus are activated. See “Activating

Extended Menus” on page 148.

1. Follow the steps in “Getting to Phone

Setup...” to get to

Set Time and Date

, and then press

O

to select.

2. Press

M

to choose

Set Home Time + Date

Set Away Time + Date

, and then press

O

or

. You will see

Enter Time

and the time currently set.

3. Press

O

to accept the displayed time.

or

Enter the time in 24-hour format, and then press

O

. You will see

Enter Date

and the date currently set.

4. Press

O

to accept the displayed date. You will see

Completed

.

or

Enter the date in day(dd)-month(mm)year(yy) form and then press see

Completed

.

O

. You will

5. Press and hold

C

to exit the menu.

Tip: The time displayed

(home or away) on the real time clock indicator is the one you selected on page 150.

Customizing Phone Features 151

Selecting the Display Language

Your phone contains 21 languages. Use this feature to select the language in which your phone displays menus and messages.

Note: This feature is available only when the extended menus are activated. See “Activating

Extended Menus” on page 148.

1. Follow the steps in “Getting to Phone

Setup...” to get to

Language Selection

, and then press

O

to select.

2. Press

M

to scroll through the choices, and then press

O

to select the displayed option.

3. Press and hold

C

to exit the menu.

If you accidentally change the language of your phone’s display, press and hold the

C

key to return to the idle display, then press

M 2 6 O

to return directly to the language selection submenu.

152 Customizing Phone Features

*HWWLQJWR3KRQH6HWXS

1.

Press

M

until you see

Phone Setup

, and then press

O

.

2.

Press

M

to scroll to one of the features described below. You will see the feature name, followed by

Select?

.

Turning Lights On and Off

You can activate or deactivate all phone lighting, including the phone status indicator, display backlighting, and keypad backlighting.

Note: This feature is available only when the extended menus are activated. See “Activating

Extended Menus” on page 148.

1. Follow the steps in “Getting to Phone

Setup...” to get to

Lights

, and then press

O to select.

2. Press

M

to choose

On

or

Off

, and then press

O

to select the displayed option.

3. Press and hold

C

to exit the menu.

Customizing Phone Features 153

Setting Keypad Tones

Choose the sounds your phone makes when its keys are pressed.

Note: This feature is available only when the extended menus are activated. See “Activating

Extended Menus” on page 148.

1. Follow the steps in “Getting to Phone

Setup...” to get to

Select Keypad Tones

, and then press

O

to select.

2. Press or

M

to choose

Normal Tones

No Tones

, and then press

O

.

,

Single Tone

,

3. Press and hold

C

to exit the menu.

154 Customizing Phone Features

*HWWLQJWR3KRQH6WDWXV

1.

Press

M

until you see

Phone Setup

, and then press

O

.

2.

Press

M

to scroll to

Phone Status

, and then press

O

.

3.

Press

M

to scroll to one of the features described below.

Managing Phone Settings

Review Your Phone’s Settings

Use this feature to review all of your phone’s settings that have changed from their original default settings.

To review all settings:

1. Follow the steps in “Getting to Phone

Status...” to get to

Status Review

, and then press

O

.

2. Press

M

to scroll through the list of all the menu items you have changed.

3. Press and hold

C

to exit the menu.

Note: You can reset your phone’s original settings if desired. See “Reset Phone Options to Factory

Defaults” on page 156.

Customizing Phone Features 155

Tip: The factory default security code is

000000.

Reset Phone Options to Factory

Defaults

Use the master reset feature to reset all settings to their original default settings. This feature:

• resets audible call timers, the in-call timer, and the automatic lock

• resets extended menus to default setting

• restores keypad tones to normal, ringer tone to standard, and the volume level to the middle (fourth bar) of its range

To reset all settings:

1. Follow the steps in “Getting to Phone

Status...” to get to

Master Reset

, and then press

O

to select. You will see

Enter Security Code

.

2. Enter your six-digit security code . You will see

Reset Complete

.

3. Press and hold

C

to exit the menu.

156 Customizing Phone Features

*HWWLQJWR3KRQH6WDWXV

1.

Press

M

until you see

Phone Setup

, and then press

O

.

2.

Press

M

to scroll to

Phone Status

, and then press

O

.

3.

Press

M

to scroll to one of the features described below.

Clear All Stored Information

The master clear feature resets the same items as master reset, plus the following:

• clear phone book entries from phone memory

(not from SIM memory)

• clear last calls made and received lists

• reset resettable call timers

Master clear does not clear the:

• fixed dial list

• my number(s) list

• received messages list

To clear all settings:

1. Follow the steps in “Getting to Phone

Status...” to get to

Master Clear

, and then press

O

to select. You will see

Enter

Security Code

.

2. Enter your six-digit security code .You will see

Reset Complete

.

3. Press and hold

C

to exit the menu.

Tip: The factory default security code is

000000.

Customizing Phone Features 157

Customizing Phone Features 158

Accessing the Network

This chapter shows you how to register with the Iridium

®

satellite network.

159

Network Selection Menu

Network Selection

Register Now

160 Accessing the Network

*HWWLQJWR1HWZRUN6HOHFWLRQ

1.

Press

M

until you see

Network Selection

, and then press

O

.

2.

Press

M

to scroll to one of the features described below. You will see the feature name, followed by

Select

?.

Registering With the Satellite Network

Use this feature to access Iridium satellite service.

Your phone searches for the Iridium satellite network.

1. Rotate and extend the antenna upward.

See “Holding the Phone” on page 40.

2. Follow the steps in “Getting to Network

Selection...” to get to

Register Now

.

3. Press

O

to select. You will see

Registering...

. This may take a few seconds.

If the phone finds the signal, you will see

Registered

and the signal strength indicator: rx

The n

(home system) indicator also appears.

If the phone is unsuccessful you may see one of these messages:

Rotate and Extend Antenna

,

Check Signal

,

Busy Try Later

,

Please Try Later

, or

Restricted Area

.

Note: You must wait three minutes between registration attempts.

Accessing the Network 161

162 Accessing the Network

Selecting a Mode

The Satellite Series 9505 phone currently operates in satellite mode only.

163

Mode Selection Menu

All Modes

Mode Selection

Cellular Preferred

Cellular Always

1

1

Satellite Preferred

Satellite Always

1 This mode is not currently supported

164 Selecting a Mode

*HWWLQJWR0RGH6HOHFWLRQ

1.

Press

M

until you see

Mode Selection

, and then press

O

.

2.

Press

M

to scroll to one of the features described below. You will see the feature name, followed by

Select

?.

Selecting Satellite Mode

Select Satellite Always Mode

When you select this feature, your system always accesses the Iridium satellite network. When you are in satellite mode, you will see the

+

(satellite mode) indicator in the lower left corner of your display.

1. Follow the steps in “Getting to Mode

Selection...” to get to

Satellite Always

.

2. Press

O

to select.

Selecting a Mode 165

166 Selecting a Mode

Timing Your Calls

Your phone’s call meters give you a variety of options for tracking the time you spend on the phone. You can monitor the length of individual calls, set a timer to track monthly usage, or have the phone alert you with tones at specific intervals.

167

Call Meters Menu

Call Meters

Show Call Timers

Show Last Call

Total For All Calls

Reset All Timers

Set Audible Call Timers

Single Alert Timer

On/Off

Repetitive Timer

On/Off

Set In-Call Display

Show Time Per Call

No In-Call Display

Lifetime Timer1

1 This feature is available only when the extended menus are activated.

168 Timing Your Calls

*HWWLQJWR6KRZ&DOO7LPHUV

1.

Press

M

until you see

Call Meters

, and then press

O

.

2.

Press

M

to scroll to

Show Call Timers

, and then press

O

.

3.

Press

M

to scroll to one of the features described below.

Showing Call Timers

Call timers help you track your airtime. Keep a running tab of your monthly usage or view the airtime of your most recent call.

Show the Time of the Last Call

Use this feature to display the elapsed time of your most recent call.

1. Follow the steps in “Getting to Show Call

Timers...” to get to

Show Last Call

, and then press

O

to select.

You will see the airtime of the most recent call in hours, minutes, and seconds. After several seconds, the display returns to

Show Last Call

.

2. Press and hold

C

to exit the menu.

Note: The last call timer shows elapsed time of the most recent call made since your phone was turned on. This information is not saved when you shut off the phone.

Timing Your Calls 169

*HWWLQJWR6KRZ&DOO7LPHUV

1.

Press

M

until you see

Call Meters

, and then press

O

.

2.

Press

M

to scroll to

Show Call Timers

, and then press

O

.

3.

Press

M

to scroll to one of the features described below.

Show Total Time for All Calls

Use this feature to display your total airtime since you last reset the Call Timer.

1. Follow the steps in “Getting to Show Call

Timers...” to get to

Total For All Calls

, and then press

O

to select.

You will see the airtime accumulated since the timer was last reset. The airtime is displayed in hours, minutes, and seconds. After several seconds, the display returns to

Total For All

Calls

.

2. Press and hold

C

to exit the menu.

Reset All Timers

Reset your timers at the beginning of each billing cycle to keep track of your spending.

1. Follow the steps in “Getting to Show Call

Timers...” to get to

Reset All Timers

, and then press

O

to select.

You will see returns to

Completed

. The display then

Reset All Timers

.

2. Press and hold

C

to exit the menu.

Note: This does not reset the Lifetime Timer described on page 174.

170 Timing Your Calls

*HWWLQJWR$XGLEOH&DOO7LPHUV

1.

Press

M

until you see

Call Meters

, and then press

O

.

2.

Press

M

to scroll to

Set Audible Call Timers

, and then press

O

.

3.

Press

M

to scroll to one of the features described below.

Setting Audible Call Timers

Let your phone watch the clock for you. The call timers signal at a set time or interval with beeps only you can hear.

Set the Single Alert Timer

Use this feature to set your phone to alert you after an elapsed time.

1. Follow the steps in “Getting to Audible Call

Timers...” to get to

Single Alert Timer

, and then press

O

to select.

2. Press

O

M

to scroll to

On

or

Off

, and then press

to select.

• If you select

On

, you will see

Enter Seconds

.

Continue with step 3 .

• If you select

Off

, you will see

Completed

.

Continue with step 4 .

3. Press

O

to accept the current setting. You will see

Seconds XXX

.

or

Enter a number from 11 to 999, and then press

O

. You will see

Seconds XXX

.

4. Press and hold

C

to exit the menu.

Timing Your Calls 171

*HWWLQJWR$XGLEOH&DOO7LPHUV

1.

Press

M

until you see

Call Meters

, and then press

O

.

2.

Press

M

to scroll to

Set Audible Call Timers

, and then press

O

.

3.

Press

M

to scroll to one of the features described below.

Set the Repetitive Timer

Use this feature to set your phone to alert you at specific intervals, for example every 45 seconds.

1. Follow the steps in “Getting to Audible Call

Timers...” to get to

Repetitive Timer

, and then press

O

to select.

2. Press

M

to scroll to

On

or

Off

, then press

O to select.

• If you select

On

, you will see

Enter Seconds

.

Continue with step 3 .

• If you select

Off

, you will see

Completed

.

Continue with step 4 .

3. Press

O

to accept the current setting. You will see

Seconds XXX

.

or

Enter a number from 11 to 999, and then press

O

. You will see

Seconds XXX

.

4. Press and hold

C

to exit the menu.

172 Timing Your Calls

*HWWLQJWR&DOO0HWHUV

1.

Press

M

until you see

Call Meters

, and then press

O

.

2.

Press

M

to scroll to one of the features described below.

Showing the In-Call Timer

Use this feature to display a running clock of the airtime elapsed while on a call.

1. Follow the steps in “Getting to Call Meters...” to get to

Set In Call Display

, and then press

O

to select.

2. Press

M

to scroll to

Show Time Per Call

or

No

In Call Display

, and then press

O

to select.

3. Press and hold

C

to exit the menu.

This feature is not available in cellular mode.

Timing Your Calls 173

*HWWLQJWR&DOO0HWHUV

1.

Press

M

until you see

Call Meters

, and then press

O

.

2.

Press

M

to scroll to one of the features described below.

Showing the Lifetime Timer

Tip: The lifetime timer can not be reset. The

Reset All

Timers feature has no effect on this timer.

Use this feature to show the total time of all calls for the life of your phone.

Note: This feature is available only when the extended menus are activated. See “Activating

Extended Menus” on page 148.

1. Follow the steps in “Getting to Call Meters...” to get to

Lifetime Timer

, and then press select.

O

to

You will see the total airtime of your phone since it was manufactured.

2. Press and hold

C

to exit the menu.

174 Timing Your Calls

Customizing the Menu System

This chapter shows you how to hide the menu features you don’t use regularly, and how to add your favorite features to the Quick Access menu for instant recall.

175

Personalizing the Options Menu

You can customize the Options menu by moving features in and out of the extended menus. Features that you place on the extended menu are hidden when extended menus are turned off, and become visible when you activate the extended menus.

Note: The default factory setting for your phone is extended menus activated.

Move Menu Features

To move menu features:

1. Find the feature you want to move.

2. Press and hold

O

. You will see one of two responses depending on where that menu feature is currently located. If you see:

Message

Remove From

Short Menus

(The feature is in the short menu).

Add To

Short Menus

(The feature is in the extended menu).

Description

Press

O

to move the feature to the extended menu. You will see

Menu

Item Moved

.

or

Press

M

to scroll to

Leave in Short

Menus

, and then press to select.

You will see

Move Cancelled

.

Press

O

to move the feature to the short menu. You will see

Menu Item

Moved

.

or

Press

M

to scroll to

Leave in Long

Menus

, and then press to select.

You will see

Move Cancelled

.

Note: Some features and submenus cannot be moved. You will see

Cannot Move Menu Item

.

176 Customizing the Menu System

Activate/Deactivate Extended

Menus

Use the Options menu to activate and deactivate extended menus. Activate them when you need access to every feature. Deactivate them for everyday use.

1. Press

M

until you see

Phone Setup

, and then press

O

to select.

2. Press press

M

to scroll to

to select.

Extended Menus

, and then

3. Press

M

to scroll to either

On

or

Off

, and then press

O

to select.

All hidden features are accessible when you activate the extended menus.

Access Hidden Features

If you want to access a feature hidden in the extended menus, but don’t want to leave the extended menus active, you can use this shortcut:

Press and hold

M

for a few seconds.

All extended menus features remain accessible until you exit the Options menu.

Customizing the Menu System 177

Personalizing the Quick Access Menu

You can replace the default Quick Access menu features described on page 65 with any of the following features.

Icon

D

F

T

N e

Quick Access Feature

Find by Location recalls a Phone Book entry by its memory location number.

Add Entry to Phone stores entered numbers in the next available phone memory location.

V

Add Entry to SIM stores entered numbers in the next available SIM card location.

Ring Volume displays and sets the incoming call ring tone volume.

Check Signal checks the strength of the signal from the satellite network.

Switch Memory switches one-touch dialing between the phone and SIM memories depending on the current setting.

Last Call Timer displays the duration of your last call.

Y

%

Show Services displays a list of service phone numbers programmed by your service provider.

$ Mode Selection : This feature is not currently supported.

To change a default quick access feature to one of the features listed above:

1. Press

E

and then press

M

to scroll to the feature you wish to change.

2. Press and hold

O

to access the list of features available.

3. Press

M

to scroll through the list until you find the desired feature.

4. Press

O

to store the displayed feature in the new location. You will see

Completed

.

178 Customizing the Menu System

Troubleshooting

This chapter tells you what to do if you experience one of the following problems:

Problem

You can’t turn the phone’s power on.

Solution

• Did you press and hold the

S

key for three seconds to turn the phone’s power on?

• Check the battery. Is it charged, properly fitted, and are the contacts clean and dry?

You can’t make calls.

You can’t receive calls.

You can’t make international calls.

• Check the antenna. Is it fully extended and rotated?

Do you have a clear unobstructed view of the sky?

• Did you enter the number in international format? All calls made from the Iridium satellite system must be in international format.

• Check the signal strength indicator. If the signal is weak, move to an open space or, if you are in a building, move closer to a window.

• Try to register manually.

• Is

Restricted

displayed? Check the Call Barring setting.

• Has a new SIM card been inserted? Check that no new restrictions have been imposed.

• Check to see if your fixed dialing list is enabled. If so, you can only make calls to numbers or prefixes that are on the list.

• Check to see that your phone is powered on.

• Check the antenna. Is it fully extended and rotated?

Do you have a clear unobstructed view of the sky?

• Check the signal strength indicator. If the signal is weak, move to an open space or, if you are in a building, move closer to a window.

• Check the Call Forwarding and Call Barring settings.

• Check the Ringer setting. If it is off, there is no audible ringer.

• Check to see if your fixed dialing list is enabled.

• Have you included the relevant codes? Press and hold

( the

0

key to display the international dialing prefix

+

) and then enter the appropriate country code followed by the phone number.

179

Problem

Your phone will not unlock.

Solution

• Have you inserted a new SIM card? Enter the new PIN code.

• Do you have a replacement phone? Enter the default phone unlock code —1234.

• Have you forgotten the unlock code?

Press

M

to change the unlock code (you need your security code).

Your PIN is blocked.

Enter the PIN unblocking key (PUK1) or contact your service provider. See “Unblock the PIN Code” on page 145 for additional information.

Your PIN2 is blocked.

Your SIM card will not work.

Enter the PIN2 unblocking key (PUK2) or contact your service provider. See “Unblock the PIN2 Code” on page 147 for additional information.

• Is the card inserted the correct way?

• Is the card visibly damaged or scratched? Return the card to your service provider.

• Check the SIM and phone contacts. If they are dirty, clean them with an antistatic cloth.

You can’t access your messages.

You can’t cancel

Call Forwarding or Call Barring.

The o

(message) indicator is flashing.

Are you in the correct mode?

Wait until you are in an area with good network coverage and try again.

There is not enough memory available to store another message. Use the Messages menu to delete one or more messages.

The battery won’t charge.

• Check the charger. Is it properly connected? Are its contacts clean and dry?

• Check the battery contacts. Are they clean and dry?

• Check the battery temperature. If it is warm, let it cool before recharging.

• Is it an old battery? Battery performance declines after several years of use. Replace the battery.

• Make sure you have a Motorola approved battery installed. If you see

Invalid Batt.

in the display, you will not be able to charge this battery.

180

Problem Solution

The battery drains faster than normal.

• Are you in an area of variable coverage? This uses extra battery power.

• Is your antenna fully rotated and extended? Do you have a clear unobstructed view of the sky? This helps use less battery power.

• Is it a new battery? A new battery needs two to three charge/discharge cycles to attain normal performance.

• Is it an old battery? Battery performance declines after several years of use. Replace the battery.

• Is it a battery that hasn’t been completely discharged?

Allow the battery to fully discharge (until the phone turns itself off) and then charge the battery overnight.

• Are you using your phone in extreme temperatures? At extreme hot or cold temperatures, battery performance is significantly reduced.

You find your phone becoming warm during use.

You may notice this during long calls or during charging.

The heat is produced by the electronic components within your phone and is quite normal.

Phone is not responding to user controls including the power key.

Remove the battery from the phone and then reattach it to cycle power and reset.

Your SIM card is inserted in the phone but the display says:

•

•

•

Check Card or

Insert Card

.

Check that the SIM card has been inserted correctly.

The contacts of the SIM card may be dirty. Turn the phone off, remove the SIM card and rub the contacts with a clean cloth. Replace the card in the phone.

Blocked or

!

Blocked

Enter the PIN unblocking key (PUK1) or the PIN2 unblocking key (PUK2) respectively, or contact your service provider. See “Unblock the PIN Code” on page 145 and “Unblock the PIN2 Code” on page 147 for additional information.

Bad Card See Supplier

.

Please contact your service provider.

You do not have a

Cellular Cassette and your phone says

Insert

Cassette

.

Make sure you have the correct mode settings selected.

You are either in Cellular Always mode or in a Preferred mode.

181

Problem

You find your phone’s prompts in a language other than your own.

Solution

1.

Press and hold the

C

key to return to the idle display.

2.

Press

M 2 6 O

to go directly to the language selection submenu.

3.

Press

M

until you see your preferred language.

4.

Press

O

to select.

182

Index

Symbols

*

character 44

+

character 43, 44

¨

character 44, 77

A

AC travel charger 20 accessories 19–22 accessory connector defined 15 illustration 13 adapter antenna 22 auto accessory 21

Add To Short Menus

message 176 airbag 10 alert, incoming call 48 alphanumeric keypad 13 antenna adapter 22 attaching 24 care 7 clear-line-of-sight 14 detents 14, 40 extending 40 illustration 40 lock release button 13, 15, 24 removing 24 rotating 40 audible call timers repetitive 172 resetting default settings 156 single alert 171 auto accessory adapter 21,

33–34 automatic lock resetting default 156 setting 141 automatic redial 44

B

Bad Card See Supplier

message

40, 181 barring calls incoming 108 outgoing 107 battery cautions 8, 36 charge indicator defined 17 displayed 33, 35 illustration 13 charge meter 65, 111 charging 33–34

Charging Battery

message 33,

111 compartment illustration 31 desktop charger 34 disposal 36

Fast Charge Completed

message

111 installing 29–30 internal charger 33–34

Invalid Batt.

message 29, 111

Low Battery

message 35

Not Available

message 111 power level, checking 111 removing 31–32 safety cover 28 standby time 19 talk time 19 troubleshooting 180, 181

Blocked

message 40, 145, 181

!

Blocked

message 40, 147,

181

Busy Try Later

message 43, 55,

57, 63, 161

183

C call answering 47–48 automatic redial 44 barring incoming 108 outgoing 107 dialing special characters 44 emergency call 45 ending 46, 49 incoming call alert 48 international call dialing

+

character 44 placing 43 last ten calls 90 muting 54 placing 42–46 receiving 47–48 redialing last number 44 returning a call 123 unable to make call 179 unable to make international call 179 unable to receive call 179

Call Answer?

47, 48 call barring barr password changing 110 entering 107–110 cancelling 109 incoming calls 108 outgoing calls 107 unable to cancel 180

Call Failed

message 47, 48 call forwarding all calls 100–101 cancelling 104 from Quick Access menu 65 unable to cancel 180 voice calls 102–103 when unavailable 99 call holding conference call 58, 60 ending 56–57

184 making new call 56 messages 57 placing call on hold 56 switching between calls 56

Call Meters menu diagram 168

Lifetime Timer feature 174

Repetitive Timer feature 172

Reset All Timers feature 170

Set Audible Call Timers feature

171–172

Show Call Timers feature

169–170

Show In-Call Display feature

173

Show Last Call feature 169

Single Alert Timer feature 171

Total For All Calls feature 170 call meters. See call timers

Call Related Features menu

Call Barring feature 106–110

Bar Incoming Calls 108

Bar Outgoing Calls 107

Cancel All Barring 109

Change Bar Password 110

Call Forwarding feature

99–104

Cancel All Forwarding 104

Detailed Forwarding

102–103

Forward All Calls 100–101

Forward When Unavailable

99

Call Waiting feature 105 diagram 98

Pending Call Drop feature 113

Show Battery Meter feature

111

Show Signal Strength feature

112 call timers all calls 170 elapsed airtime 173 in-call timer 173

lifetime timer 174 most recent call 169, 178 repetitive 172 resetting all 157, 170 single alert 171 total airtime 170 call waiting accepting waiting call 55 activating 105 ending current call 55 messages 55 rejecting waiting call 55

Call Waiting Answer?

55

Call?

42 callback number 123

Calling

message 42

Cannot Hold Second Call

message

55, 57

Cannot Move Menu Item

message

176 carry case 22

Cellular Cassette connector 13

Insert Cassette

message 181 troubleshooting 181 cellular mode selecting 178 charger, AC travel 20

Charging Battery

message 33,

111

Check Card

message 39, 181 check mark indicator defined 18

Check Signal

message 39, 161

Checking Signal...

message 112 clear key, defined 14 clearing stored information 157 clear-line-of-sight, defined 14 clock 13, 17 code phone unlock 141–142 security 84, 142, 147, 156, 157

SIM card PIN 39, 144–145

SIM card PIN2 85–88,

146–147

Completed

message 63 conference call adding single call 58, 60 beginning 58, 60 ending 59 ending all active calls 60 ending all held calls 60 holding a private conversation

59, 60 keypad controls 60 making new call 58 messages 59 placing call on hold 58, 60 releasing single call 60

Conference Full

message 59

Conference Unsuccessful

message

59

Connected

message 42, 47, 48

D date setting 151 viewing 149 default settings, resetting 156 desktop charger 34 detents, antenna 14, 40 dialing

0

44

*

character 44

+

character 44

¨

character 44, 77 international call 43 last ten calls 90 number with pauses 78

Phone Book entry 82 phone number 42

PIN numbers 44 special characters 44 supplementary service numbers 44 display backlighting 153

185

cold temperatures and 15 icons 65, 178 illustration 13 indicators 13 language, selecting 152 special characters 44 standby mode 41 status indicators 17–18 wrong language displayed 182

E earpiece adjusting volume 50 illustration 13 elapsed airtime timer 173 emergency call 45

Emergency Calling

message 45

End Call?

42

Enter Name

message 63

Enter Phone Unlock Code

message

39, 142

Enter PIN

message 39, 63, 144

Enter PIN2

message 85–88 exiting menus and menu features

62 extended menus activating 148, 177

Call Barring 106 deactivating 148, 177 default setting 176 defined 176

Detailed Call Forwarding 102

Language Selection 152

Lifetime Timer 174

Lights 153 moving menu features 176

Select Keypad Tones 154

Set Time and Date 151

Set Time Format 150

Show Time and Date 149, 150 external devices, communicating with 143

F

Failed

message 63

Fast Charge Completed

message

111 fixed dial list defined 85 entry adding 86 editing 88 erasing 87 one-touch dialing 93 viewing 89 fixed dialing activating 85

PIN2 code 146 viewing fixed dial list 89 forwarding calls all calls 100–101 cancelling 104 from Quick Access menu 65 voice calls 102–103 when unavailable 99

H headset 21 headset jack 13, 15, 21

Hold Failed

message 55, 57 holding a call conference call 58, 60 ending 56–57 making new call 56 messages 57 placing call on hold 56 switching between calls 56 home system indicator defined 18 displayed 38, 161 hourglass icon defined 18 displayed 63

186

I icons hourglass 63

Quick Access menu 18, 65,

178 in use indicator 18

In-Call menu call holding 56–57 call waiting 55 conference call 58–60 defined 66 entering 66 menu features 66–67 muting a call 54 in-call timer defined 173 resetting 156 incoming call alert 48 indicators battery charge 13, 17, 33, 35 check mark 18 display 13, 17–18 home system 18, 38, 161 hourglass icon 18, 63 in use 18 message 17, 118, 127, 180 no service 18, 38

Quick Access menu icons 18 real time clock 17 satellite mode 17, 165 scroll bar 18, 63 signal strength 13, 17, 112,

161 status 13, 16, 17–18 infrared data port activating 143 deactivating 143

Insert Card

message 39, 181

Insert Cassette

message 181 international call dialing

+

character 44 placing 43 unable to make 179 international dialing prefix dialing 43

Invalid Account

message 39

Invalid Batt.

message 29, 111

Iridium Call Attempt

message 48

K key presses 12 keypad keypad tones, setting 154 locking 50 resetting default tones 156 unlocking 50 keys alphanumeric keypad 13 clear 14 keypad tones, setting 154 locking the keypad 50 memory recall 14, 51, 81, 91 memory store 14, 74, 90 menu 14 menu system, navigating 62 message 13, 14, 117–135

OK 14 power 14 quick access 13, 14, 51, 64,

139 scroll 14 unlocking the keypad 50 volume control 13, 14, 50, 51,

139

L language selecting 152 wrong language displayed 182 last call timer displaying 169, 178 last ten calls clearing 157 placing a call 90

LCD. See Liquid Crystal Display

Leave in Long Menus

message 176

Leave in Short Menus

message

176

187

lifetime timer 174

Liquid Crystal Display cold temperatures and 15 status indicators 17–18 locking the keypad 50 locking the phone automatically 141 from Quick Access menu 65 instantly 141

See also unlocking the phone

Low Battery

message 35

M making a call 42–46 master clear 157 master reset 156 memory phone 71, 73, 74

SIM card 71, 73, 74 memory recall key 14, 51, 81, 91 memory store key 14, 74, 90 menu

Add To Short Menus

message

176

Call Meters 167–174

Call Related Features 97–113

Cannot Move Menu Item

message

176 customizing 175–178 defined 61 exiting 62 feature selection messages 63 indicators 63

Leave in Long Menus

message

176

Leave in Short Menus

message

176

Menu Item Moved

message 176

Messages 115–135

Mode Selection 163–165

Move Cancelled

message 176

Network Selection 159–161

Phone Book 69–95

Phone Setup 137–157

188 questions 63

Remove From Short Menus message 176 scrolling 62, 64 using 61–67

Menu Item Moved

message 176 menu key 14 message editor 124–127

Message Failed Resend?

127, 130 message indicator defined 17 displayed 118 flashing 17, 118, 127, 180 message key defined 14 illustration 13 using 117–135

Message Read Now?

118, 120

Message Sent

message 127, 129 messages callback number 123 contents 119 creating 125 deleting 122, 131 editing 126 feature selection indications 63 go to next message 122, 128 message key 117–135 notification incoming voicemail 120 received message(s) 118 phone 12 reading from Quick Access menu 65 incoming 120 stored 121 received 49, 120–123 returning a call 123 sending 124–131 unable to access messages

180 voicemail 120

Messages menu

Call Voicemail feature 117

diagram 116

Message Editor feature

124–127

Message Settings feature

132–135

Outgoing Messages feature

128–131

Received Messages feature

121–123

Voicemail Number feature 132 microphone 13

Mode Selection menu diagram 164 satellite preferred mode 165 mode, selecting 165, 178

Move Cancelled

message 176 multiple-key answer 47, 48

Mute

message 54 muting a call 54, 65

N network satellite, registering 65, 161 network features call barring 106–110 call forwarding 99–104 call holding 56–57 call waiting 55, 105 conference call 58–60

Network Selection menu diagram 160

Register Now feature 161

No Number Available

message 117

No Service Center

message 127,

130 no service indicator defined 18 displayed 38

Not Available

message 111

O

OK key 14 one-touch dialing frequently called numbers 71 switching memory, from Quick

Access menu 178 using 93

Options menu customizing 176–177 defined 61 entering 62 exiting 62 using 62–63

Orient Antenna Call Attempt message 47, 48

Overwrite?

74

P password, call barring 107–110 patent information 195 pause dialing 44, 77–78 pauses in numbers, entering 77 pending call drop signal 113

Personal Identification Number code 144

See also PIN code personal mailbox 49, 119 phone becomes warm during use 181 features, customizing 137–157 holding 40 illustration 13 locking automatically 141 from Quick Access menu 65 instantly 141 messages at power-on 39 security code, default 142 service phone numbers 95,

178 settings clearing 157 resetting default 156 viewing 155 turning on and off 38 unable to make call 179 unable to make international call 179

189

unable to receive call 179 unable to turn on 179 unable to unlock 180 unblocking the PIN code 145 unblocking the PIN2 code 147 unlock code changing 142 default 141 entering 141 unlocking 141 use while driving 8 use with other electronic devices 9–10

Phone Book adding an entry 73–76 capacity, checking 83 characters, entering 75–76 entries clearing all 157 scrolling through 50, 80 entry adding 73–76, 178 calling 82 changing 79 correcting 75 erasing 82 locating 80–81 modifying 82 find entry by location 81, 178 find entry by name 65, 80 fixed dial list adding an entry 86 editing an entry 88 erasing an entry 87 fixed dialing activating 85 viewing fixed dial list 89 last ten calls 90 memory recall key 81 memory store key 74 menu diagram 70 name entering 75–76 storing 73–76

190 number calling 82 entering 73–74 storing 73–76 one-touch dialing 93 organizing 71 pauses in numbers dialing 78 entering 77 phone memory 71 phone numbers grouping 72 security issues 72 storing 71 prefixes, using 79 preventing access 84

Restricted

message 84

SIM card memory 71 storage capacities 71

Phone Book menu

Add Entry feature 73–76

Call Number feature 82

Check Capacity feature 83 diagram 70

Erase Name And Number feature 82

Find Entry By Location feature

81

Find Entry By Name feature 80

Modify Name Or Number feature 82

My Phone Number(s) feature

91–92

One-Touch Dial Setting feature

93

Prevent Access feature 84

Setup Fixed Dialing feature activating 85

Add Entry 86

Edit Entry 88

Erase Entry 87

Last Ten Calls 90

View Fixed Dial List 89

Show Services feature 95

phone memory checking capacity 83 entries, clearing all 157 one-touch dialing 93 storage capacities 71 phone number dialing 42 modifying on SIM card 92 programming on SIM card 92 using pauses in 77 using prefixes 79 viewing your own 91 phone settings clearing 157 resetting default 156 viewing 155

Phone Setup menu

Activate IR Port feature 143

Adjust Ring Volume feature

139

Automatic Lock feature 141

Change Clock feature 150

Change SIM Card PIN feature

145

Change SIM Card PIN2 feature

146

Change Unlock Code feature

142 diagram 138

Extended Menus feature 148,

177

Language Selection feature

152

Lock Now feature 141

Master Clear feature 157

Master Reset feature 156

New Security Code feature 147

Phone Lock feature 141–142

Phone Status feature 155–157

Require SIM Card PIN feature

144–145

Ring or Vibrate feature 140

Select Keypad Tones feature

154

Set Ringer Tone feature 140

Set Time and Date feature 151

Set Time Format feature 150

Show Time and Date feature

149

Status Review feature 155 phone unlock code changing 142 default 141 entering 141

PIN code activating 144

Blocked

message 40, 145, 181 changing 145 deactivating 144 defined 144

Enter PIN

message 39, 144 entering 39, 144–145 incorrect entry 145 unblocking 145

PIN unblocking key (PUK1) defined 145 entering 145

PIN2 code

!

Blocked

message 40, 147,

181 changing 146 defined 146

Enter PIN2

message 85–88 entering 85–88 incorrect entry 147 unblocking 147

PIN2 unblocking key (PUK2) defined 147 entering 147 placing a call 42–46

Please Try Later

message 43,

161 postscripting 79 power checking power level 111 power-on messages 39 turning phone on and off 38 unable to turn on phone 179

191

power connector defined 15 illustration 13 power key defined 14 illustration 14 using 26, 33, 34, 38 prefixes 79 prompts, defined 12

PUK1. See PIN unblocking key

PUK2. See PIN2 unblocking key

Q quick access key defined 14 illustration 13 ringer volume, adjusting 51,

139 using 64

Quick Access menu customizing 178 default settings 65 defined 64 icons 18, 65, 178 quick access key 64 replacing features 178 using 64–65

Quit?

63

R

Range XXX XX

message 74 real time clock 17 receiving a call 47–48 receiving messages 49

Reconnect Failed

message 55, 57 redial automatic 44 last number 44

Redial Failed

message 44

Redial?

43, 44

Registered

message 161 registering from Quick Access menu 65 satellite network 161

192

Registering...

message 39, 42,

161

Remove From Short Menus

message

176 repetitive timer defined 172 resetting default setting 156 setting 172

Restricted Area

message 43, 161

Restricted

message 84 restricting calls 106–110 restricting phone use 85–89 restricting SIM card access 85 ringer activating 140 adjusting volume 51, 139, 178 deactivating 140 resetting default tone 156 setting tone 140 wakeup tone 38

Rotate and Extend Antenna message 39, 43, 161

Rotate Antenna Call Attempt message 48

Rotate Antenna Registering...

message 39

S safety information 7–10 satellite antenna illustration 40 lock release button 13, 15 satellite mode muting a call 54 selecting 165, 178 satellite mode indicator defined 17 displayed 165 satellite network, registering 65,

161 satellite preferred mode selecting 165 scroll bar defined 18

displayed 63 scroll key 14 scrolling 62, 64

Searching...

message 39 security code changing 147 default 84, 142, 147 defined 147 entering 84, 142, 147, 156,

157 security features 144–147

Select?

63 service phone numbers 95, 178 short menus 176 signal strength indicator defined 17 illustration 13 satellite network registration and 161 viewing 112, 178

SIM card

Bad Card See Supplier

message

40, 181

Blocked

message 40, 145, 181

!

Blocked

message 40, 147,

181

Check Card

message 39, 181 defined 25 display messages 181 fixed dial list 85

Insert Card

message 39, 181 inserting 26 phone number entering 92 modifying 92 security issues 72 viewing your own 51, 91

PIN code activating 144 changing 145 deactivating 144 defined 144

Enter PIN

message 39, 144 entering 39, 144–145 incorrect entry 145 unblocking 145

PIN2 code changing 146 defined 146

Enter PIN2

message 85–88 entering 85–88 incorrect entry 147 unblocking 147 precautions 25, 26 protecting 144–145 removing 26 restricting access 85 security features 144–147 storing messages outgoing 127 received 120 troubleshooting 180, 181

SIM card memory checking capacity 83 one-touch dialing 93 storage capacities 71 single alert timer resetting default setting 156 setting 171 special characters 44

Split Call Unsuccessful

message

59 standby mode 41 standby time, battery 19 status indicator defined 16 display 17–18 illustration 13 status indicators 13

Stored to Outgoing

message 127

Stored XXX

message 74 submenus, defined 61 supplementary service numbers

44

T talk time, battery 19 time

193

away time, defined 151 changing clock display 150 home time, defined 151 setting 151 setting format 150 viewing 149 timers all calls 170 elapsed airtime 173 in-call timer 173 lifetime timer 174 most recent call 169, 178 repetitive 172 resetting all 170 single alert 171 total airtime 170 total airtime timer 170 travel charger 33–34 troubleshooting 179–182

Trying

message 55, 57

U

Unanswered Call

message 49 unanswered calls 49 unblocking

SIM card PIN code 145

SIM card PIN2 code 147 unlock code changing 142 default 141 entering 141 unlocking the keypad 50 unlocking the phone 141

See also locking the phone

V

VibraCall alert function activating 65, 140 deactivating 140 phone power-on and 38 vibration mode. See VibraCall alert function

View Options?

63 voicemail

194 call forwarding when unavailable 99 checking 65, 117 detailed call forwarding

102–103 forward all calls 100–101

No Number Available

message

117 notification message 118, 120 storing voicemail number 132 volume control keys illustration 13 earpiece, adjusting 50 resetting default 156 ringer, adjusting 51, 139, 178 volume level display 50

W wakeup screen 38 warranty information 197–200 wrist strap 21

Patent Information

4649543

D288683

4654655

D289156

4662691

4667333

4668917

4670747

4672502

4680787

4681476

4683585

4692726

4704588

D292578

4706036

D292920

4710724

4711361

4715063

4716319

4716391

4723305

4616314

4617520

D286778

4626309

4628529

4629829

4630304

4630305

4633141

4636593

4636741

D288432

4648125

D294257

4727306

4727583

4730195

4734635

4736277

4737976

4740794

4741018

Manufactured under one or more of the following U.S. patents:

4398265

4400584

4400585

D270835

D271491

Re.31470

4431977

4434461

4455534

4462098

D275951

4484153

4485486

4486624

D276809

4491972

D277667

4504834

D278708

4523155

4546329

4550426

4551696

4121218

4138681

4193036

4254382

4302845

4312074

4327319

4329666

4369516

4369522

4378603

4390963

D269873

4564821

D282169

4571595

4573017

4574243

4585957

4602218

D284759

D285439

Other patents pending.

Re.32768

D299136

4797929

4798975

4800348

4802236

4809356

4811377

4811404

4827226

4827507

4829274

4837534

D301476

4843621

4845772

D302015

4851966

4868576

4870686

D303656

4876552

4879533

4741034

4742562

D295627

4746242

D295973

D295975

4751737

D296187

4761621

4764737

D297734

D297735

4777564

D305427

4896124

4897873

D305717

4904549

4905288

4905301

D306293

D306441

4975808

4984290

D314173

D315330

D315346

D315543

D315559

D315565

5004992

D315907

5008925

D316417

D316859

5017856

5018188

5020091

5020092

5020093

5028083

5028859

5029044

5029233

5031028

D306594

4912602

4918732

4922178

4945570

4954796

4959851

4963812

4963843

4965537

4972355

4972432

4972455

5036532

5053924

5057762

D320780

5059885

5060294

D322783

D322955

5081674

D327061

5128834

D328302

5142551

5142696

5146620

5148471

5148473

5148961

5150359

5150384

5152006

5157693

5163159

5164652

5166596

5175759

5175874

D332261

5182749

D332785

5185566

5187809

5193223

5195106

5195108

5201069

5204977

5210793

5214675

5222104

5222251

5083304

D324024

D324388

5095503

D325028

D325583

5109536

D325915

5113436

5117450

5121047

5122480

5122722

5249302

5251331

D340710

5260988

5261119

5262710

5263052

5276707

5278994

D343173

5280637

D344087

5287553

5287555

5287556

D344511

5301365

5321847

D348880

5349588

5359696

5361400

5363071

5365549

D352497

5366826

D353131

D353361

5375143

5375258

5379324

D354055

D337332

5230007

5230093

5233633

5235492

5237257

5239127

5241545

5241548

5241650

5241693

5242767

D339582

5544250

D372481

5546275

5546380

D372896

5551078

5559471

D374424

D374872

5572193

5574976

D368696

5510693

5511235

D369162

5513078

D369359

5519303

5519346

5524276

5524278

D370463

5530922

5542116

5577268

D375732

D375733

D375734

D375932

D375952

D376127

5588041

5589796

5590177

5594778

5594951

D377792

D377934

5604050

5606730

D378366

5613229

5613863

5615233

5621763

D359735

D359959

5432017

D360632

5438684

D361070

5442680

5446763

5448763

5448771

5453997

D362840

5457744

5459640

5463646

5465412

5469177

5475752

D365094

D365817

5486843

5487184

5488335

5488649

D366872

5493198

5493714

5497126

5497382

D367640

5499394

5506490

D354062

5384825

D356084

5402447

5406146

5406562

D357224

D357457

5410741

D357680

D357681

5428836

D359734

195

196

Warranty Information

Motorola Limited Warranty For Satellite Subscriber

Radiotelephone Products

1. Coverage and Duration

Motorola warrants that its satellite subscriber radiotelephone products and accessories

(the “Products”) shall be free from defects in materials and workmanship for a period of one (1) year from the date such Products are delivered to the first end-user purchaser or first lessor (the “Purchaser”), or the date such Products are first placed into satellite subscriber service, or the date such Products are first installed into a vehicle, whichever occurs earliest.

Motorola, at its option, shall at no charge to Purchaser either repair, replace, or refund the purchase price of all Products that do not conform to this warranty, provided the

Products are returned in accordance with the instructions set out below and within the warranty period. These remedies are Purchaser’s exclusive remedies under this warranty. Repair may include the replacement of parts or boards with functionally equivalent reconditioned or new parts or boards. Products that have been repaired or replaced are warranted for the balance of the original warranty period. All Products for which replacements have been provided shall become Motorola’s property.

2. Warranty Conditions

This warranty is made by Motorola to the first Purchaser of the Products only, and it is not assignable or transferable by the Purchaser to subsequent purchasers or lessees.

This is Motorola’s complete warranty for the Products. Motorola assumes no obligation or liability for additions or modifications to this warranty unless made in writing and signed by an officer of Motorola. Motorola does not warrant any installation, maintenance, or service of the Products not performed by Motorola. All batteries manufactured by Motorola and sold with Products are covered by this warranty, but only those batteries whose capacity falls below 80% of rated capacity, or that develop leakage shall be considered non-conforming. This warranty is voided for batteries if: a) such batteries are charged by other than the Motorola-approved battery charger specified for charging such batteries; b) any seals on such batteries are broken or show evidence of tampering; or c) such batteries are used in equipment other than the

Product for which they are specified; or d) such batteries are charged and stored at temperatures greater than 60 degrees centigrade.

Motorola is not responsible in any way for any ancillary equipment not furnished by

Motorola which is attached to or used in connection with the Products, or for operation of Products with any ancillary equipment, and all such equipment is expressly excluded from this warranty. Furthermore, Motorola is not responsible for any damage to

Products resulting from the use of ancillary equipment not furnished by Motorola for use with the Products.

When Products are used in combination with ancillary or peripheral equipment not manufactured by Motorola, Motorola does not warrant the operation of the combination, and Motorola will honor no warranty claim where the Product is used in such a

197

combination and it is determined by Motorola there is no fault with the Product.

Motorola specifically disclaims any responsibility for any damage caused in any way by the use of accessories and peripherals not manufactured or supplied by Motorola, including but not limited to batteries, chargers, adapters, and power supplies.

This product is covered by a U.S.A. warranty . If the product has been sold outside of the U.S.A., Motorola will honor the U.S.A. warranty terms and conditions only. Outside of the U.S.A., any different warranty terms, liabilities and/or legal requirements of the country in which the product is sold are the responsibility of the Distributor/Service

Provider or Point-of-Sale from whom you purchase the product(s).

3. Conditions Not Covered By This Warranty

a. Defects or damage resulting from: use of the Product in any manner not normal or customary; misuse, accident or neglect including but not limited to dropping the Product onto hard surfaces, immersion in or exposure to water, rain or extreme humidity, immersion in or exposure to sand, dirt or other particulates, exposure to extreme heat, spills of food or liquid; improper testing, operation, maintenance, installation, adjustment; or any alteration or modification of any kind.

b. Breakage or damage to antennas, or scratches or other damage to plastic surfaces or other externally exposed parts caused by Purchaser’s use.

c. Products disassembled or repaired in such a manner as to adversely affect performance or prevent adequate inspection and testing to verify any warranty claim.

d. Products on which serial numbers or date tags have been removed, altered or obliterated.

e. Coil cords that are stretched or on which the modular tab is broken; leather cases, which are covered under separate manufacturers' warranties; and Products rented on a month-to-month basis.

4. Obtaining Warranty Service

For warranty questions or repairs, please call your Service Provider or Point-of-Sale, not Motorola. Equipment needing service should be returned to your Service

Provider or Point-of-Sale , not Motorola.

If the Product is installed in a vehicle, drive the vehicle to your Service Provider or

Point-of-Sale , not Motorola, because analysis of the problem may require inspection of the entire installation. In the case of non-vehicular installation, the Product and all detachable parts such as antennas, battery packs, and chargers, must be delivered to your Service Provider or Point-of-Sale.

SERVICE WORK PERFORMED BY SERVICE CENTERS NOT AUTHORIZED BY

MOTOROLA TO PERFORM SUCH WORK WILL VOID THIS WARRANTY.

All Products shipped to Motorola Satellite Subscriber Service Center must be shipped with freight and insurance prepaid. Service Provider or Point-of-Sale must include with the Product a bill of sale, a lease, or some other comparable proof of purchase, the name and location of the installation facility, if any, and most importantly, the

Purchaser’s name, address, and telephone number and a written description of the problem. Product that is repaired or replaced under this warranty shall be shipped to

Service Provider or Point-of-Sale at Motorola’s expense for the freight and insurance, and at Service Provider or Point-of-Sale expense for any applicable duties. If additional information is needed, please contact Motorola at the address set out at the bottom of this document.

198 Warranty Information

5. General Provisions:

THIS WARRANTY IS GIVEN IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR

IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. FURTHER,

BECAUSE THE SATELLITE SYSTEM, THE GATEWAY, AND THE LOCAL SATELLITE

SERVICE PROVIDER ARE NOT CONTROLLED BY MOTOROLA, NO WARRANTY IS

MADE AS TO COVERAGE, AVAILABILITY, OR GRADE OF SERVICE PROVIDED BY

THE SATELLITE CARRIER. IN NO EVENT SHALL MOTOROLA BE LIABLE FOR

DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT IN

QUESTION, OR FOR ANY LOSS OF USE, LOSS OF TIME, INCONVENIENCE,

COMMERCIAL LOSS, LOST PROFITS OR SAVINGS OR OTHER INCIDENTAL,

SPECIAL, OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR

INABILITY TO USE SUCH PRODUCT, TO THE FULL EXTENT SUCH MAY BE

DISCLAIMED BY LAW.

6. Patent and Software Provisions

Motorola will defend at its own expense, any suit brought against Purchaser to the extent that it is based on a claim that the Product infringes a United States patent, and

Motorola will pay those costs and damages finally awarded against Purchaser in any such suit which is attributable to any such claim, but such defense and payments are conditioned on the following: (i) that Motorola will be notified promptly in writing by

Purchaser of any notice of such claim; and (ii) that Motorola will have sole control of the defense of such suit and all negotiations for its settlement or compromise; and (iii) should the Product become, or in Motorola ’s opinion be likely to become, the subject of a claim of infringement of a United States patent that Purchaser will permit Motorola, at its option and expense, either to procure for Purchaser the right to continue using the

Product or parts or to replace or modify the same so that it becomes non-infringing or to grant Purchaser a credit for such Product or parts as depreciated and accept its

Product or parts or to replace or modify the same so that it becomes non-infringing or to grant Purchaser a credit for such Product or parts as depreciated and accept its return.

The depreciation will be an equal amount per year over the lifetime of the Product, accessories, battery or parts as established by Motorola.

Motorola will have no liability to Purchaser with respect to any claim of patent infringement which is based upon the combination of the Product or parts furnished hereunder with software, apparatus or devices not furnished by

Motorola, nor will Motorola have any liability for the use of ancillary equipment or software not furnished by Motorola which is attached to or used in connection with the Product. The foregoing states the entire liability of Motorola with respect to infringement of patents by the Product, accessories, batteries or any parts thereof.

Laws in the United States and other countries preserve for Motorola certain exclusive rights for copyrighted Motorola software such as the exclusive rights to reproduce in copies and distribute copies of such Motorola software. Motorola software may be copied into, used in and redistributed with only the Product associated with such

Motorola software. No other use, including without limitation disassembly, of such

Motorola software or exercise of exclusive rights in such Motorola software is permitted.

Warranty Information 199

7. State Law and Other Jurisdiction Rights

SOME STATES AND OTHER JURISDICTIONS DO NOT ALLOW THE EXCLUSION

OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR LIMITATION

ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS OR

EXCLUSIONS MAY NOT APPLY TO PURCHASER.

This warranty gives Purchaser specific legal rights, and Purchaser may also have other rights which vary from jurisdiction to jurisdiction.

8. Contact

For additional information about Iridium products and services, please contact your

Iridium Service Provider or Point-of-Sale.

To contact Motorola, dial one of these numbers:

Phone: +1 480 726-1048

CONUS toll free: 1 -877-449-0600

AT&T Direct Toll Free Int’l Dial:

Enter AT&T Direct Access Number for the country where you are

When prompted, enter 877-466-9467

Inquiries can also be faxed or mailed to:

MOTOROLA CSD

Service Manager

M/D H-2121

8201 E. McDowell Rd.

Scottsdale, AZ 85257

FAX (480) 726-2971

CONUS Toll Free 877 449-0599

200 Warranty Information

p r o d u c t s f o r t h e i r i d i u m s y s t e m

In order to contact Motorola (Monday thru Friday 7AM to 7PM [CST]), dial one of the following numbers:

US & Canada: 1-888-839-4647

Outside the US & Canada: (Toll-Free Global Number): +1-8000-839-4647

Direct Dial: +1-847-523-1898

TTY Toll-Free Number 1-888-390-6456

TTY (outside the United States): +1-847-523-1841

+ designates international dialing access code (00)

©1999 Motorola, Inc.

All trademarks identified as such herein are trademarks of Motorola, Inc.

(R) Reg. U.S. Pat. & Tm. Off.