Gateway GT350 F1 Specifications

GT350 F1 specifications

Product overview

The Gateway GT350 F1 is a dual-socket tower or 4U rack mountable server for flexible environment delivering blazing performance and exceptional expansion capability. Offering high reliability, latest technology, cost-effective growth, and comprehensive management features, Gateway GT350 F1 delivers high-availability, power efficient solution in departmental and medium enterprise environment deployments.

Internal view

1 2 x 720 W 80 PLUS

®

gold-level efficient easy-swap power supplies (1+1 redundant, hot-pluggable)

2 2 x Intel® Xeon® X5600 series processors

3 18 x DDR3 ECC registered / unbuffered DIMMs

4 N+1 redundant cooling fans (internal), and 1+1 redundant cooling fans (rear)

5 6 x PCIe expansion slots

6 3 x 5.25” media expansion bay

8 16 x 2.5” hot-swappable hard drive bays or

8 x 3.5” hot-swappable hard drive bays

Note : Availability may vary by region

1


Front View

4U Rackmount View

Rear View

Front I/O

1 2 x USB ports

2 ID LED button

3 Network, hard drive and power status indicators

Rear I/O

1 PS2 mouse and keyboard ports

2 4 x USB ports

2


3 2 x Gigabit LAN port (RJ-45)

4 Video port

5 Serial port

6 System ID LED

7 Management port (RJ-45)

What's New

•

New Intel® Xeon® 5600 Series processors

•

Intel Xeon X5675, X5672, E5649, E5645, E5607, E5606, E5603

Hot-pluggable/redundant power supply with 80 PLUS

®

gold-level efficiency

•

Smart Server Manager v1.1 with improved management functionality

Product Specifications

Processors and Chipset

•

Up to two Intel® Xeon® 5500/5600 series processors

•

Chipset: Intel® 5520

Memory

•

Memory capacity:

Registered DIMM: 1, 2, 4, 8, 16 GB

Unbufferred DIMM: 1, 2, 4 GB

•

Maximum capacity: up to 192 GB registered DIMMs when fully populated with 2 DIMMs per channel in

12 slots

•

Maximum capacity: up to 48 GB unbuffered DIMMs when fully populated with 2 DIMMs per channel in

12 slots

Network Controllers

•

Integrated dual-port Intel® 82576EB Gigabit Ethernet Controller (2 ports total)

Storage

•

Hard disk form factor: 2.5” or 3.5”

•

Type: SAS / SATA / SSD with hot-plug capability

•

3.5” Maximum capacity:

Up to 16 TB SATA HDD (2 TB 3.5" x 8 HDDs)

Up to 4.8 TB SAS (600 GB 3.5” x 8 HDDs)

•

2.5” Maximum capacity:

Up to 16 TB SATA HDD (1 TB 2.5" x 16 HDDs)

Up to 9.6 TB SAS (600 GB 2.5” x 16 HDDs)

Storage Controllers

•

Integrated Intel

10 support

®

ICH10R Serial ATA host controller (six 3 Gb/s SATA ports) with software RAID 0, 1, 5,

•

Optional PCIe 4-/8-/16-port SAS RAID card

Expansion slots

•

2 x PCIe® 2.0 x8 (x 16 connector)

•

2 x PCIe® 2.0 x4 (x8 connector)

•

1 x PCIe® 1.0 x4 (x8 connector)

•

1 x Flex I/O (PCIe® x8)

3


Management

•

Gateway Smart Server Manager

•

System ID LED buttons, System Health LED

•

Gateway Smart Console for server management and KVM over IP remote management

Deployment/Serviceability

•

Gateway Smart Setup

•

BIOS Update Tool

•

IPMI Firmware Update Tool

Operating Systems

•

Windows Server

®

2008

•

Windows Server 2008 R2

•

Windows Server 2003

•

Red Hat Enterprise Linux 5.4

•

SuSE Linux Enterprise Server 11

•

VMware ESXi

™

4

•

VMware ESX

™

4

Input/output interface

Front

•

One Power/off button

•

LED indicators: power, HDD activity, LAN port 1 through 2, ID, and System status

Rear

•

PS2 keyboard port

•

PS2 mouse port

•

4 x USB 2.0 ports

•

BMC Management port

•

Serial port

•

Video port

•

2 x Gigabit port

•

ID LED

Optical drive

•

5.25” SATA DVD Super multi

•

5.25” tape drive

Chassis/Form Factor

•

Tower/ 4U rack mountable

Power Supply

•

2 x 720 W 80 PLUS® gold-level efficient, easy-swap power supply (1+1 redundant, hot-pluggable)

Regulatory Compliant Standards

EMC

•

FCC (Class A)

•

CE (Class A)

•

BSMI (Class A)

Safety

4


•

UL/cUL

•

CB

Nemko/GS

Environmental Specifications

Dimensions 434 (H) x 648 (D) x 178 (W) mm (17.2 x 25.5 x 7 inches)

Weight Maximum 39 kg (88.1 lbs)

28.5 kg (62.8 lbs)

System inlet temperature

Minimum (includes a single HDD, CPU and

RAM, and PSU)

Operating

Non-operating

10° - 35° C (50° - 95° F)

-40° - 70° C (-40° - 158° F)

Relative humidity

Acoustics

Operating

Non-operating

Idle

LWAd

LpAm

Operating

LWAd

8 - 90 %

5 - 95 %

6.2 BA

43.6 dBA

6.0 BA

Power

LpAm

Rated Steady –state power

Maximum Peak Power

BTU rating

43.9 dBA

720 W

728 W

2456.64 BTU/hr at 100 - 240 VAC

5


Technical specifications

PCIe

®

specifications

The primary I/O bus for the main board is PCIe Gen2. The following table lists the characteristics of the

PCI-E bus segments. Details about each bus segment follow the table.

NOTE: The signaling bit rate of PCI Express is 2.5Gbit/s one direction per lane for Gen 1 and 5.0Gbit/s one direction per lane for Gen 2.

Expansion slot

Number Type Bus width

1

Voltage Connector Location Length

PCIe x16

PCIe x8

PCIe x8

2

2

1

PCIe Gen2 x8

PCIe Gen2 x4

PCIe Gen1 x4

3.3V

3.3V

3.3V x16 x8 x8

Onboard

Onboard

Onboard

Full height

Full height

Full height

Flex I/O 1 PCIe Gen2 x8 3.3V x8

NOTE:

1. Indicates the number of physical electrical lanes running to a PCIe

® connector.

Onboard Full height

2. Default bus assignment (in decimal). Inserting cards with PCI™ bridges may alter the actual bus assignment number.

3. Slots are enumerated differently based on the operating system. Microsoft® operating systems enumerate Device ID by bus starting from the lowest bus to the highest.

Onboard storage specifications

Item

Controller

Description

Intel

®

82801JR (ICH10R) I/O Controller Hub

Simultaneous drive transfer channels 6 onboard SATA ports

Max throughput per channel

Data transfer method

Drive type supported

RAID levels support

3 Gb/s

•

Non-RAID mode

•

RAID mode

Serial ATA

RAID function support

•

RAID 0, 1, 10, 5 (Intel software RAID)

•

RAID 0, 1, 10 (Adaptec software RAID)

NOTE : Intel software RAID only supports Windows OS

Supports multiple logical volumes

Setup through ROM based Array Configuration Utility

Installation scripting support

RAID OS support

NOTE: This controller does not support LED functions

•

Windows Server 2008

•

Windows Server 2008 R2

•

Windows Server 2003

•

Red Hat Enterprise Linux 5.4

•

SuSE Linux Enterprise Server 11

6


Additional features

•

NCQ (Native Command Queuing)

•

AHCI (Advanced Host Controller Interface)

Onboard LAN specifications

Item

Controller

Network interface

Compatibility standards

Manageability

Virtualization acceleration

Description

Intel

®

82576EB Gigabit Ethernet Controller

(2 ports total)

10Base-T / 100Base-TX / 1000Base-T

•

IEEE 802.3 Ethernet interface for 10BASE-T

•

IEEE 802.3ab Ethernet interface for 1000BASE-T

•

IEEE 802.3u Ethernet interface for 100BASE-TX

•

NC-SI, SMBus

•

PXE, iSCSI boot

Intel

®

I/O Acceleration Technology

Virtual Machine Device Queues (VMDq)

PCI-SIG SR-IOV implementation

1

2

3

4

6

Connector

Supported cable type

RJ-45

CAT 5e wire

Memory specifications and population

Item

Supported memory types

Population

Description

•

Registered DDR3 1066 / 1333 MHz

•

Unbuffered DDR3 1066 / 1333 MHz

NOTE: Gateway does not qualify mixed memory configurations of memory type, capacity or make.

Gateway’s validated memory populations are listed below.

NOTE : Support for 8 / 16 GB DIMMs may vary by regional availability.

Single processor configuration guide

NOTE : Quad Rank DIMMs and Unbuffered DIMMs can only use a maximum of 6 slots

DIMM # DIMM2A DIMM3C DIMM3B DIMM3A DIMM1C DIMM

1B

X

X

X

X

X

DIMM

1A

X

X

DIMM

2C

X

X

DIMM

2B

X

X

X

X X

X

X

7


X X X 9 X X X X X X

Dual processor configuration guide

NOTE : Quad Rank DIMMs and Unbuffered DIMMs can only use a maximum of 6 slots per CPU (12 slots total)

DIMM

#

2

3

4

6

CPU 1 CPU 2

1C 1B 1A 2C 2B 2A 3C 3B 3A 1C 1B 1A 2C 2B 2A 3C 3B 3A

X X

X X X

X

X

X

X X

X

X

X

X X

8

9

12

X X

X X

X X

X X

X X

X X

X X

X X

X X

X

X X

X X

X

X X

X

X X

18 X X X X X X X X X X X X X X X X X X

3 DIMM per channel configuration is only available for single/dual rank RDIMM. UDIMM and Quad rank

RDIMM can only support 2 DIMM per channel.

* support depends on 8GB/16GB DIMM available

Mirroring mode:

•

For mirroring mode, the memory contains a primary image and a copy of the primary image. Therefore, the effective size of memory is reduced by at least one-half.

•

Channel 3 is no function and can’t be populated in this mode.

•

Follow the population rules described in independent mode.

•

Mirroring mode needs the channel 1 & channel 2 with identical DIMM. DIMM slot populations within a channel do not have to be identical but the same DIMM slot location across channel 1 and channel 2 must be the same. DIMM1A and DIMM2A should be the same type, size and manufacturer. DIMM1B and DIMM2B memory should be the same type, size and manufacturer. DIMM1C and DIMM2C memory should be the same type, size and manufacturer.

•

Same rule is applied to the CPU2.

•

3 DIMM per channel configuration is only available for single/dual rank RDIMM.

•

Please refer to the User Guide for complete population for both single and dual processor configurations.

Lockstep mode:

•

In Lockstep Channel Mode, each memory access is a 128-bit data access that spans Channel 1 and

Channel 2. This is done to support SDDC for DRAM devices with 8-bit wide data ports. The same address is used on both channels such that an address error on any channel is detectable by bad

ECC. Lockstep Channel mode is the only RAS mode that supports x8 SDDC.

•

Channel 3 is no function and can’t be populated in this mode.

•


8


•

Lockstep mode needs the channel 1 & channel 2 with identical DIMM. DIMM slot populations within a channel do not have to be identical but the same DIMM slot location across channel 1 and channel 2 must be the same. DIMM1A and DIMM2A should be the same type, size and manufacturer. DIMM1B and DIMM2B memory should be the same type, size and manufacturer. DIMM1C and DIMM2C memory should be the same type, size and manufacturer.

•

Same rule is applied to the CPU2.

•


•


.

Sparing mode:

•

In this mode, if system detects degrading memory and system still not crash, the data in failed channel will be copied to spare channel. Failed channel is then isolated and spare channel becomes active. But if any uncorrectable error happens before the isolation, it will still cause the system stop normal operation.

•

Channel 3 is the spare channel. Therefore, the effective size will be reduced by one-third.

•


•

Sparing mode need all three channels with identical DIMMs. 1A, 2A and 3A should be the same type, size and manufacturer. 1B, 2B and 3B memory should be the same type, size and manufacturer. 1C, 2C and 3C memory should be the same type, size and manufacturer. Same rule is applied to CPU2.

•

Memory sparing mode is only supported by Intel Xeon 5600 series processor. Intel Xeon 5500 series processor does NOT support the memory sparing mode.

•


•


Memory Identification

Generally, there are some memory information printed on the label of DIMM, but different vendor may have different format. For example:

4GB 2Rx4 PC3-10600R xx xx xxx

1. Density

1GB, 2GB, 4GB, 8GB, 16GB

2. Rank

1R = Single Rank

2R = Dual Rank

4R = Quad Rank

Note: if any quad rank DIMM is used, maximum only 2 DIMM per channel can be supported

3. Bit Organization

This platform supports x4 and x8

Note: It’s not recommend to mix DIMM with different bit organization in one system

9


4. Speed

PC3 – 6400 => DDR3- 800

PC3 – 8500 => DDR3- 1066

PC3 – 10600 => DDR3- 1333

10


Power specifications

720W Power Supply

Operational Input

Voltage Range

(Vrms)

100 to 240

Frequency

Range (Nominal)

(Hz)

Nominal Input

Voltage (Vrms)

60/50

100

Max. Rated

Output Wattage

Nominal Input

Current (A rms)

720

8.46

846.0 Max. Rated Input

Wattage Rating

(Watts)

Max. Rated VA

(Volt-Amp)

Efficiency (%) at

Max. Rated

Output Wattage

Power Factor

Leakage Current

(mA)

Max. Inrush

Current (A peak)

Max. Inrush

Current Duration

(mS)

Max. British

Thermal Unit

Rating (BTU/hr)

837.54

88.12

0.99

0.17

17.24

4.62

2456.64

120

720

6.97

836.4

828.03

89.49

0.99

0.19

19.41

4.58

2456.64

208

720

3.80

790.4

774.59

90.95

0.98

0.29

18.52

4.61

2456.64

200

720

3.87

774.0

758.52

90.74

0.98

0.31

16.88

4.62

2456.64

220

720

3.74

822.8

806.34

91.51

0.98

0.35

16.48

4.64

2456.64

230

720

3.5

805.0

788.9

91.92

0.98

0.37

20.47

4.63

2456.64

240

720

3.29

789.6

773.81

92.27

0.98

0.41

22.54

4.64

2456.64

11


Gateway server software utilities

Smart Setup 2.0

Smart Console

Smart Server

Manager v1.1

Easy deployment via the latest version of Gateway’s Smart Setup. Smart Setup is available both in box as a driver packed installation DVD or a downloadable file to be put into a USB 2.0 device, and eases the deployment of Gateway servers for any certified OS. Through its unique interface, users may select to have all the correct drivers be pre-deployed for the OS of their choosing, as well as setup hardware RAID devices, BMC settings (where available), and even clone the pre-settings to a bootable USB device to ease mass server deployments.

Web-based management utility to simplify system management with embedded iBMC, system monitoring and alerting, event handling, remote power control and

KVM-over-IP. Smart Console is OS independent and offers virtual media through floppy, ODD, and removable disk.

Offering 24-7 monitoring for system health and performance.

Delivers proactive event management features including system event logging, event handling from e-mail and SNMP Trap (PET) alerting.

Monitors onboard hardware, operating systems and virtual machines

Allows remote control from KVM and Power control

Satisfies management in web-based UI, role-based administration, and automated management scripts.

12


Available options

Processors (up to 2)

Intel® Xeon® processor (Six Core)

X5675 (12 MB L3 cache, 3.06 GHz, DDR3-1333 MHz, 95W)

X5670 (12 MB L3 cache, 2.93 GHz, DDR3-1333 MHz, 95 W)



L5640 (12 MB L3 cache, 2.26 GHz, DDR3-1333 MHz, 60 W)

E5649 (12 MB L3 cache, 2.53 GHz, DDR3-1333 MHz, 80 W)

E5645 (12 MB L3 cache, 2.40 GHz, DDR3-1333 MHz, 80W)

Intel® Xeon® processor (Quad Core)

X5672 (12 MB L3 cache, 3.20 GHz, DDR3-1333 MHz, 95W)


















E5504 (4 MB L3 cache, 2 GHz, DDR3-800 MHz, 80 W)




Intel® Xeon® processor (Dual Core)

13


E5503 (4 MB L3 cache, 2 GHz, DDR3-800 MHz, 80 W)


Memory

Memory type Registered / Unbuffered DDR3 ECC memory

Capacities

DIMM number

Max memory

1 / 2 / 4 / 8 / 16 GB DIMMs

18

192 GB (48 GB unbuffered)

Hard drives

Type

Enterprise SATA, 2.5”

Interface, bandwidth

3 Gb/s



Enterprise SAS, 2.5”

NOTE: SAS drives require an add-on RAID card

Enterprise SAS, 3.5”

NOTE: SAS drives require an add-on RAID card

6 Gb/s

3 Gb/s

6 Gb/s

6 Gb/s

Capacities (RPM)

150 GB (10K)

160 GB (7.2K)

300 GB (10K)

500 GB (7.2K)

1 TB (7.2K)

250 GB (7.2K)

500 GB (7.2K)

1 TB (7.2K)

250 GB (7.2K)

500 GB (7.2K)

750 GB (7.2K)

1 TB (7.2K)

2 TB (7.2K)

73 GB (15K)

146 GB (15K)

300 GB (10K)

450 GB (10K)

600 GB (10K)

146 GB (15K)

300 GB (15K)

450 GB (15K)

600 GB (15K)

Optical drives

14


DVD-ROM

SuperMulti (DVD ± RW)

RAID cards

Model

LSI

®

MegaRAID SAS 9240-4i

LSI

®

MegaRAID SAS 9260-8i*

Flex I/O, LSI ® SAS 2108*

LSI

®

MegaRAID SAS 9260-16i*

Port number

4 internal ports

8 internal ports

8 internal ports

16 internal ports

*Battery Backup Unit BBU07 available

RAID support

0, 1, 5, 10

0, 1, 5, 6, 10, 50, 60

0, 1, 5, 6, 10, 50, 60

0, 1, 5, 6, 10, 50, 60

RAID HBA for Tape Drive

Note : LTO tape drives require an add on card for external or internal connectivity

Model

LSI

®

SAS3442E-R

Ethernet network cards

Port number

4 internal / 4 external ports

RAID support

0, 1, 10

Model

Intel ® Gigabit CT2 desktop adapter

Supermicro AOC-SG-i2 server adapter

Supermicro AOC-SG-i4 server adapter

Port number

1

4

4

Bandwidth

10/100/1000 Mbps

10/100/1000 Mbps

10/100/1000 Mbps

Supermicro AOC-STGN-i2S server adapter (DA2)*

2

Intel

®

X520-SR1 server adapter* 1

Intel

®

X520-SR2 server adapter* 2

Intel

®

X520-LR1 server adapter* 1

10 Gbps

10 Gbps

10 Gbps

10 Gbps

* Note : Intel’s 10GbE cards vary in terms or their connecter type. The X520-DA2 is a copper connector for lengths up to 7M, while the X520-SR1/2 is an optical connection for cables up to 550M. The X520-LR1 is for even longer cable lengths up to 10kM.

Fibre Channel HBAs

Model

Qlogic

®

QLE2460

Qlogic

®

QLE2462

Qlogic ® QLE2560

Port number

1

2

1

Bandwidth

4 Gb/s

4 Gb/s

8 Gb/s

15


Qlogic

®

QLE2562 2

Tape Backup Unit (TBU)

Model

LTO Ultrium-3, 3Gb/s SAS

LTO-4, 3Gb/s SAS

LTO Ultrium-3, 3Gb/s SAS

LTO-4, 3Gb/s SAS

DAT72 SATA/USB TBU

Tape capacity

400/800 GB

400/800 GB

400/800 GB

400/800 GB

36 GB

72 GB

160 GB DAT160 USB TBU

TPM module

TPM module with STMicro chip

8 Gb/s

Form factor

External 1U rack

External 1U rack

Internal 5.25” half-height




16


Service and support

Gateway Servers offer a comprehensive service suite to take care of daily IT needs. Users can select the 3year standard warranty or choose extended warranties and services.

In a continuing effort to improve the quality of our products, information in this document is subject to change without notice. Images shown are only representations of some of the configurations available for this model. Availability may vary depending on region.

© 2010. All rights reserved.

Microsoft and Windows are registered trademarks of Microsoft Corporation. Intel, the Intel logo, Xeon and

Xeon Inside are trademarks of Intel ® Corporation.

NOTE: Extension warranty services may vary by country. Please contact Gateway authorized resellers for more information.

17

Gateway GT350 F1 Specifications

•

Intel

I/O Acceleration Technology

Virtual Machine Device Queues (VMDq)

PCI-SIG SR-IOV implementation

Related manuals

LG

GT350

LG

GT350

Gateway

GR380 F1

Acer

380 F1

Gateway

GR160 F1

Acer

TK.R5300.081

Acer

TK.R5500.045