T E C H N O L O G I E S

User Guide

NAS Adapter

(NASU2)

www.addonics.com

v4.1.11

Technical Support

If you need any assistance to get your unit functioning properly, please have your product information ready and contact Addonics Technical Support at:

Hours: 8:30 am - 6:00 pm PST

Phone: 408-453-6212

Email: http://www.addonics.com/support/query/

For more detailed information on setting up the NAS adapter, refer to the User

Manual located on the CD that came with the device.

The NAS adapter is a flexible, economical and powerful unit for your Network. Follow the instructions to help you connect, setup, and configure it.

Note: Any external USB storage device that you connect to the NAS adapter will initially be required to be formatted. This means, if you are connecting an external

USB drive with data on it, the hard drive will be formatted erasing all the information.

If your NAS adapter is connected to a LAN network with an active DHCP server, it will obtain an IP address from DHCP server automatically.

B. Setup NAS Adapter as DHCP Server:

If your LAN network does not have an active DHCP server, NAS adapter will immediately act as DHCP server and assign itself an IP address for installation.

1.

2.

3.

You need first configure the IP address for NAS adapter to operate in the static IP environment. For Configuring details, please refer to “IP Config” setup page.

NAS Adapter Hardware Installation

Power on the USB Storage device.

Connect LAN cable via LAN switch and Router.

Connect 5V power adapter to power up the NAS adapter

Connect LAN Cable to LAN Switch or Router

Connect USB Cable to USB Storage Device Connect to 5V Power Adapter

NAS Adapter connected directly to a computer’s NIC card

If you connect the NAS adapter to a computer directly, the adapter will act as a DHCP server, assigning itself an IP address automatically and also will assign an IP address to the computer’s network card. This configuration will not enable you to see the drive on the network.

www.addonics.com

Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/

NAS Adapter connected to a Router or Switch

If your NAS adapter is connected to a LAN network with an active DHCP server, it will obtain an IP address from DHCP server automatically. Or if your LAN network does not have an active DHCP server, NAS adapter will immediately act as DHCP server and assign itself an IP address for installation

Search NAS Adapter by SDisk Utility

1. Browse the CD enclosed in the product package. Copy and paste “SDisk

Utility” in to your computer then double click the icon to start search.

Note: “SDisk utility” was written with JAVA script, please make sure your computer has installed JAVA before, if not please install the JAVA script form the CD drive.

“Connect” to enter

2. When NAS Adapter has been found, click configurations.

Open NAS Adapter web GUI by using web browser.

1.

search

2.

Open web browser and type default host name “storage” in the bar.

Default login is “admin” for both User name and password. Click

“OK” to enter configurations.

www.addonics.com

Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/

Identification

You can change and modify your host, group name and password from this page. Click “Apply” to save the setting.

Host name: This is used to identify your device on the network. If you prefer a different name, type in the new name and click “Apply” to save setting.

Group Name: This should be the same as your workgroup. In general, the default

“WORKGROUP” will be OK. But if your workstation belongs to different workgroup, type in the correct group name to modify.

For Window OS, right click on “My computer” and choose “Properties”, go to the computer name tab to see your current workgroup.

If using a Mac OS system, to join a Windows workgroup, open the directory access utility (under

Applications-> utilities). Select SMB and click configure to modify the settings (administrator access required to access this option.)

Note: We strongly suggest you to change the password as soon as you logged in, to prevent unauthorized access.

Date/ Time Setting

You can change time setting from this page. Clicks “Apply” to save the setting.

By default SNTP is set to Network Time Service otherwise select synchronize to PC. If internet access is available, we recommended setting SNTP to Network Time Service instead.

www.addonics.com

Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/

IP Configuration

By default, “IP Config” is set to “Automatic IP”. This will allow the NAS adapter to obtain its IP address automatically. If you prefer setting it manually, select the static

IP option, enter your own value and click “Apply” to confirm the new setting.

Disk Utility

In this page, you can manage hard disk settings of the USB storage device.

Format: file system. Formatting the drive will erase all data on the hard drive.

Warning: For hard drives with data on it, before you have a backup before proceeding to format the hard drive!

Tip: sharing via the network or USB connection of the USB Storage device.

Scan Disk: After the scan, it will show file content information and health status for the hard disk.

www.addonics.com

Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/

SMB Server

SMB server allows you to share data or files through the network LAN. When a USB storage device is connected, a default Public folder is available to be shared among

Guest users. A default Guest user is also created.

Note: Only use English alphabet for folder names and no special characters when creating new folders.

How to create a user

Click on the “Add” button and type new account name and password. Click

“OK”. The NAS adapter will also create a SAMBA folder named “User1”.

Click “Modify” to share a folder.

www.addonics.com

Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/

Select “User1” from Folder List and click the “ ” to add user on “Sharing List”.

To Access the folder

From the Windows start button, type “Run”, and type \\ follow by the IP address.

Eg:\\192.168.1.121 and click OK to continue.

Type “User1” and password to login.

Now you have set up the folder that you wish to share on your NAS adapter. This folder can be access from other computer on your local network.

www.addonics.com

Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/

CONTACT US

www.addonics.com

Phone:

Fax:

Email:

408-573-8580

408-573-8588 http://www.addonics.com/sales/query/