GEBRUIKSAANWIJZING

BEDIENUNGSANLEITUNG

OPERATING INSTRUCTIONS

MODE D'EMPLOI

KLEURENTELEVISIE MET AFSTANDSBEDIENING

FARBFERNSEHGERÄT MIT FERNBEDIENUNG

COLOUR TELEVISION WITH REMOTE CONTROL

TELEVISEUR COULEUR A TELECOMMANDE

50354137

Contents

Markings on the Product....................................... 42

Getting Started ..................................................... 43

Notifications & Features & Accessories

................ 43

Features ............................................................... 43

Inserting the Batteries into the Remote ................ 44

Connect Power .................................................... 44

Antenna Connection ............................................. 44

Remote Control ................................................... 45

Connections.......................................................... 46

Media Browser Menu............................................ 48

Quick Menu .......................................................... 48

TV Menu Features and Functions ........................ 49

General TV Operation .......................................... 51

Using the Channel List ......................................... 51

Configuring Parental Settings

............................... 51

Electronic Programme Guide (EPG) .................... 51

Software Upgrade................................................. 52

Troubleshooting & Tips

......................................... 52

AV and HDMI Signal Compatibility ...................... 53

DVD Mode ............................................................ 54

Notes on Discs ..................................................... 54

Licence Notification

.............................................. 54

How to Watch a DVD ............................................ 54

DVD Control Panel Buttons .................................. 55

General Operation ................................................ 56

General Playback ................................................. 57

DVD Troubleshooting ........................................... 57

Disc Types Compatible with This Unit .................. 58

Specifications

....................................................... 58

Safety Information

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO

NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONN EL.

In extreme weather (storms, lightning) and long inactivity periods (going on holiday) disconnect the TV set from the mai ns.

Th e mains plug is used to disconnect TV set from the mains and therefore it must remain readily operable. If the TV set is not disconnected electrically from the mains, the device will still draw power for all situations even if the TV is in standby mode or switched off.

No te: Follow the on screen instructions for operating the related features.

IM

PORTANT - Please read these instructions fully before installing or operating

WARNING: Never let people (including children) with reduced physical, sensory or mental capabilities or lack of experience and / or knowledge use electrical devices unsupervis ed.

•

Use this TV set at an altitude of less than 2000 meters above the sea level, in dry locations and in regions with moderate or tropical climates.

•

The TV set is intended for household and similar general use but may also be used in public places.

•

For ventilation purposes, leave at least 5cm of free space around the TV.

•

The ventilation should not be impeded by covering or blocking the ventilation openings with items, such as newspapers, table-cloths, curtains, etc.

•

The power cord plug should be easily accessible. Do not place the TV, furniture, etc. on the power cord.

A damaged power cord/plug can cause fire or give you an electric shock. Handle the power cord by the plug, do not unplug the TV by pulling the power cord.

Never touch the power cord/plug with wet hands as this could cause a short circuit or electric shock.

Never make a knot in the power cord or tie it with other cords. When damaged it must be replaced, this should only be done by qualified personnel.

•

Do not expose the TV to dripping or splashing of liquids and do not place objects filled with liquids, such as vases, cups, etc. on or over the TV (e.g., on shelves above the unit).

•

Do not expose the TV to direct sunlight or do not place open flames such as lit candles on the top of or near the TV.

•

Do not place any heat sources such as electric heaters, radiators, etc. near the TV set.

•

Do not place the TV on the floor and inclined surfaces.

•

To avoid danger of suffocation, keep plastic bags out of the reach of the babies, children and domestic animals.

•

Carefully attach the stand to the TV. If the stand is provided with screws, tighten the screws firmly to prevent the TV from tilting. Do not over-tighten the screws and mount the stand rubbers properly.

•

Do not dispose of the batteries in fire or with hazardous or flammable materials.

Warning: Batteries must not be exposed to excessive heat such as sunshine, fire or the like.

English - 41 -

Serious injury or death risk

Caution

Risk of electric shock

Maintenance

Dangerous voltage risk

Important maintenance component

Markings on the Product

The following symbols are used on the product as a marker for restrictions and precautions and safety instructions. Each explanation shall be considered where the product bears related marking only. Note such information for security reasons.

Class II Equipment: This appliance is designed in such a way that it does not require a safety connection to electrical earth.

Class II Equipment With Functional

Earthing: This appliance is designed in such a way that it does not require a safety connection to electrical earth, the earth connection is used for functional purposes.

Protective Earth Connection: The marked terminal is intended for connection of the protective earthing conductor associated with the supply wiring.

Hazardous Live Terminal: The marked terminal(s) is/are hazardous live under normal operating conditions.

i Caution, See Operating Instructions: The marked area(s) contain(s) user replaceable coin or button cell batteries.

CLASS 1

LASER PRODUCT

Class 1 Laser Product:

This product contains Class

1 laser source that is safe under reasonably foreseeable conditions of operation.

WARNING

Never place a television set in unstable or inclined locations. A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as;

•

Using cabinets or stands recommended by the manufacturer of the television set.

•

Only using furniture that can safely support the television set.

•

Ensuring the television set is not overhanging the edge of the supporting furniture.

•

Not placing the television set on tall furniture

(for example, cupboards or bookcases) without anchoring both the furniture and the television set to a suitable support.

•

Not standing the television set on cloth or other materials placed between the television and supporting furniture.

•

Educating children about the dangers of climbing on furniture to reach the television set or its controls. If your existing television set is being retained and relocated, the same considerations as above should be applied.

WALL MOUNTING WARNINGS

•

Read the instructions before mounting your TV on the wall.

•

The wall mount kit is optional. You can obtain from your local dealer, if not supplied with your TV.

•

Do not install the TV on a ceiling or on an inclined wall.

• Use the specified wall mounting screws and other accessories.

• Tighten the wall mounting screws firmly to prevent the TV from fall. Do not over-tighten the screws.

WARNING

Do not ingest the battery, Chemical Burn Hazard

This product or the accessories supplied with the product may contain a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.

Keep new and used batteries away from children.

If the battery compartment does not close securely, stop using the product and keep it away from children.

If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

WARNING

Apparatus connected to the protective earthing of the building installation through the MAINS connection or through other apparatus with a connection to protective earthing – and to a television distribution system using coaxial cable, may in some circumstances create a fire hazard.

Connection to a television distribution system has therefore to be provided through a device providing electrical isolation below a certain frequency range

(galvanic isolator, see EN 60728-11)

English - 42 -

Getting Started

Notifications & Features & Accessories

Environmental Information

This television is designed to consume less energy to help save the environment. To reduce energy consumption, you should take the following steps:

If you set the Power Save Mode as Eco , the TV will switch to energy-saving mode. The Power Save Mode settings can be found in the ‘Picture’ section of the

Main Menu. Note that some picture settings will be unavailable to be changed.

If Picture Off is selected, “Screen will be off in

3 seconds.” message will be displayed. Select

PROCEED and press OK to continue. The screen will be off immediately.

When the TV is not in use, please switch off or disconnect the TV from the mains plug. This will also reduce energy consumption.

Standby Notifications

1) If the TV does not receive any input signal (e.g. from an aerial or HDMI source) for 5 minutes, the TV will go into standby. When you next switch-on, the following message will be displayed: “Standby Cause

No Signal” Press OK to continue.

•

PLL (Frequency Search).

•

PC input.

• Plug&Play for Windows 98, ME, 2000, XP, Vista,

Windows 7.

•

Game Mode (Optional).

Accessories Included

•

Remote Control

•

Batteries: 2 x AAA

•

Instruction Book

TV Control Switch & Operation

2) If the TV has been left on and not been operated for a while, the TV will go into standby. When you next switch-on, the following message will be displayed.

“Standby Cause No Operation” Press OK to continue.

1.

2.

Up direction

Down direction

3.

Programme/Volume / AV / Standby-On selection

Features

•

Remote controlled colour LED TV.

•

Fully integrated digital/cable/satellite TV (DVB-T/C)

•

HDMI inputs are for connecting a device that has a HDMI socket.

switch

The Control button allows you to control the Volume/

Programme/ Source and Standby-On functions of the TV.

•

USB input.

•

OSD menu system.

•

Scart socket for external devices (such as DVD

Players, PVR, video games, etc.)

To change volume: Increase the volume by pushing the button up. Decrease the volume by pushing the button down.

To change channel: Press the middle of the

•

Stereo sound system.

•

Teletext.

•

Headphone connection.

•

Automatic programming system.

•

Manual tuning.

•

Automatic power down after up to six hours.

•

Sleep timer.

•

Child lock.

•

Automatic sound mute when no transmission.

•

NTSC playback.

•

AVL (Automatic Volume Limiting).

button, the channel information banner will appear on screen. Scroll through the stored channels by pushing the button up or down

To change source: Press the middle of the button twice, the source list will appear on screen. Scroll through the available sources by pushing the button up or down.

To turn the TV off: Press the middle of the button down and hold it down for a few seconds, the TV will turn into standby mode.

English - 43 -

Inserting the Batteries into the Remote

Lift the cover on the back of the remote upward gently. Install two AAA batteries. Make sure to match the + and - ends of the batteries in the battery compartment (observe the correct polarity)

Replace the cover.

Information for Users on Disposal of Old

Equipment and Batteries

[European Union only]

These symbols indicate that equipment with these symbols should not be disposed of as general household waste. If you want to dispose of the product or battery, please consider the collection systems or facilities for appropriate recycling.

Notice: The sign Pb below the symbol for batteries indicates that this battery contains lead.

Battery

Connect Power

IMPORTANT : The TV set is designed to operate on

220-240V AC, 50 Hz socket. After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the mains. Plug the power cable to the mains socket outlet.

Antenna Connection

Connect the “aerial” or “cable TV” plug to AERIAL

INPUT (ANT) socket located on the back of the TV.

Notification

Manufactured under license from Dolby Laboratories.

TRADEMARK ACKNOWLEDGMENT

“Dolby” and the double-D symbol are trademarks of

Dolby Laboratories.

“HDMI, the HDMI logo and High-Definition Multimedia

Interface are trademarks or registered trademarks of

HDMI Licensing LLC.”

Specification

Products

TV Broadcasting

Receiving Channels

PAL B/G D/K K I/I’

VHF (BAND I/III) - UHF

(BAND U) - HYPERBAND

Number of Preset

Channels

Channel Indicator

RF Aerial Input

Operating Voltage

Audio

1000

On Screen Display

75 Ohm (unbalanced)

220-240V AC, 50Hz.

German+Nicam Stereo

Audio Output Power

(WRMS.) (10% THD)

2 x 2,5 WRMS

Power Consumption

Weight

TV Dimensions DxLxH

(with foot)

TV Dimensions DxLxH

(without foot)

45 W

2,90

(max) kg

134 x 473 x 328

34 x 473 x 294 mm mm

Operation temperature and operation humidity:

0ºC up to 40ºC, 85% humidity max

English - 44 -

Getting Started

Remote Control

MY BUTTON 1 / 2

Press MY BUTTON 1/2 for five seconds when on a desired source, channel or link, until the “MY

BUTTON IS SET” message is displayed on the screen. This confirms that the selected MY BUTTON is now associated with the selected function.

1. Standby: On / Off switch of the TV

2. Numeric buttons: Used to navigate channels and enter passwords, text etc.

3. TV: Displays channel list / Switches among broadcast types

4. Mute: Completely turns off the volume of the TV

5. Volume +/-

6. Menu: Displays TV menu

7. Navigation buttons: Helps navigate menus, content etc. and displays the subpages in TXT mode when pressed Right

8. OK: Confirms user selections, holds the page (in TXT mode), views channel list (DTV mode)

9. Back: Returns to previous screen, opens index page

(in TXT mode)

10. Media browser: Opens the media browsing screen

11. Info: Displays information about on-screen content, shows hidden information (reveal - in TXT mode)

12. My button 1 (*)

13. Coloured Buttons

14. Language: Switches between sound modes

(analogue TV), displays and changes audio/subtitle language (where available)(digital TV)

15. Subtitles: Turns subtitles on and off (where available)

16. Rapid reverse: Moves frames backwards in media such as movies

17. No function

18. Play: Starts to play selected media

19. Stop: Stops the media being played

20. Rapid advance: Moves frames forward in media such as movies

21. Pause: Pauses the media being played.

22. Screen: Changes the aspect ratio of the screen

23. Text: Displays teletext (where available), press again to superimpose the teletext over a normal broadcast picture (mix)

24. My button 2 (*)

25. EPG (Electronic programme guide): Displays the electronic programme guide

26. Exit: Closes and exits from displayed menus or returns to previous screen

27. Quick Menu: Displays a list of menus for quick access

28. No function

29. Programme +/-

30. Swap: Quickly cycles between previous and current channels

31. Source: Shows all available broadcast and content sources

English - 45 -

Getting Started

Connections

Connector Type

Scart

Connection

(back)

VGA

Connection

(back)

SIDE AV

PC/YPbPr

Audio

Connection

(side)

HDMI

Connection

(back)

SPDIFF

Connection

(back)

SIDE AV

Side AV

(Audio/Video)

Connection

(side)

HEADPHONE

Headphone

Connection

(side)

HEADPHONE

Cables

Side Audio

YPbPr or PCConnection Cable

Device

YPBPR

YPbPr Video

Connection

(side)

USB

Connection

(side)

CI

Connection

(side)

YPbPr Connection

Cable

CAM module

NOTE: When connecting a device via the Side AV input, you must use a connection cable to enable

connection. See the illustrations above. To enable PC audio, you will need to use the SIDE AV CONNECTION cable’s WHITE & RED inputs. If an external device is connected via the SCART socket, the TV will automatically switch to AV mode.When receiving DTV channels (Mpeg4 H.264) or while in Media Browser mode, output will not be available via the scart socket. When using the wall mounting kit (optional), we recommend that you plug all your cables into the back of the TV before mounting on the wall.Insert or remove the CI module only when the TV is SWITCHED OFF. You should refer to the module instruction manual for details of the settings. By connecting an

HDMI cable to your TV, you have to use only a shielded HDMI cable to guarantee a sufficient immunity against parasitic frequency radiation.

English - 46 -

Getting Started

First Time Installation - USB Connections

Switching On/Off

To Switch the TV On

Connect the power cord to the 220-240V AC, 50 Hz.

To switch on the TV from standby mode either:

Press the “ ” button, P+ / P or a numeric button on the remote control.

Press the side function switch until the TV comes on from standby.

To Switch the TV Off

Press the “ “ button on the remote control or press the side function switch until the TV switches into standby mode.

To power down the TV completely, unplug the power cord from the mains socket.

Note: When the TV is switched to standby mode, the standby

LED can blink to indicate that features such as Standby Search,

Over Air Download or Timer is active. The LED can also blink when you switch on the TV from standby mode.

First Time Installation

When turned on for the first time, the language selection screen is displayed. Select the desired language and press OK.

The First Time Installation (FTI) screen will be displayed next. Set your preferences using the navigation buttons and when finished, press OK to continue.

You can activate Store mode option to be available in “Other settings” menu and your TV’s features will be illustrated on the top of the screen. A confirmation screen will be displayed. Select YES to proceed.

If Home Mode is selected, Store mode will not be available after the First Time Installation. Press OK button to continue.

Aerial Installation

If you select AERIAL option from the Search Type screen, the television will search for digital terrestrial

TV broadcasts.

(*) LCN is the Logical Channel Number system that organizes available broadcasts in accordance with a recognizable channel sequence (if available).

Cable Installation

If you select CABLE option and press OK button on the remote control. To continue, please select YES and press OK. To cancel operation, select NO and press

OK. You can select frequency ranges from this screen.

Enter the frequency range manually by using the numeric button.

Note: Searching duration will change depending on the selected search step.

Media Playback via USB Input

You can connect a 2.5” and 3.5” inch (hdd with external power supply) external hard disk drives or USB memory stick to your TV by using the USB inputs of the TV.

IMPORTANT!

Back up your files before making any connections to the TV. Manufacturer will not be responsible for any file damage or data loss.

Certain types of USB devices (e.g. MP3 Players) or USB hard disk drives/memory sticks may not be compatible with this TV. The TV supports FAT32 and NTFS disk formatting.

While formatting a USB hard disk that has 1TB (Tera

Byte) or more file capacity, you can experience problems with the formatting process. Do not repeatedly quickly plug and unplug the drive. This may cause physical damage to the USB player and USB device itself. Do not pull out USB module while playing a file.

NOTE: You can press MENU button to cancel.

After all the available stations are stored, the

Channel List will be displayed on the screen. If you like how the channels are sorted according to the LCN (*), please select “Yes” and than press OK .

Press MENU button to quit channel list and watch TV.

English - 47 -

Media Browser Menu

You can play photo, music, and movie files stored on a USB disk by connecting it to your TV. Connect a USB disk to one of the USB inputs located on the side of the TV. Pressing the Menu button while in the

Media Browser mode will access the Picture, Sound and Settings menu options. Pressing the Menu button again will exit from this screen.

You can set your Media

Browser preferences by using the Settings Menu.

Loop/Shuffle Mode Operation

Start playback with and activate

TV plays next file and loop the list.

Start playback with OK and activate

The same file will be played in a loop (repeat).

Start playback with OK / and activate

The file will be played in a shuffle.

Quick Menu

Quick Settings menu allows you to access some options quickly. This menu includes Power Save

Mode, Picture Mode, Equalizer Settings, Favourites and Sleep Timer options. Press Q.MENU

button on the remote control to view quick menu. See the following chapters for the details of the listed features.

Teletext

Press button to enter. Press again to activate mix mode. Press once more to exit. Follow the instructions displayed on digital teletext screen.

Digital Teletext (for UK only)

Press button to view digital teletext information.

Operate it with the coloured buttons, cursor buttons and the OK button. The operation method may differ depending on the contents of the digital teletext.

Follow the instructions displayed on the digital teletext screen. When the button is pressed again, the TV returns to television broadcast.

English - 48 -

TV Menu Features and Functions

Picture Menu Contents

Mode

You can change the picture mode to suit your preference or requirements. Picture mode can be set to one of these options: Cinema , Game , Dynamic and Natural .

Contrast

Brightness

Sharpness

Colour

Sets the lightness and darkness values of the screen.

Sets the brightness value for the screen.

Sets the sharpness value for the objects displayed on the screen.

Sets the colour value, adjusting the colors.

Power Save

Mode

Backlight

(Optional)

To set the Power Save Mode as Eco, Picture Off and Disabled.

(When the Mode is Dynamic, Power Save mode is automatically set as disabled.)

This setting controls the backlight level. The backlight function will be inactive if the Power

Save Mode is set to Eco. The backlight cannot be activated in VGA, Media Browser mode or while the picture mode is set to Game.

Noise

Reduction

If the broadcast signal is weak and the picture is noisy, use the setting to reduce the amount of noise.

Advanced Settings

Noise Reduction

Dyanmic

Contrast

Colour Temp

You can change the Dynamic Contrast ratio to desired value.

Picture Zoom

Film Mode

Sets the desired colour tone.

Sets the desired picture size from picture zoom menu.

Note: Auto (Only available in Scart mode with SCART PIN8 high voltage/low voltage switching)

Films are recorded at a different number of frames per second to normal television programmes. Turn this feature on when you are watching films to see the fast motion scenes clearly.

Skin Tone

Colour Shift

RGB Gain

Reset

Autoposition

(in PC mode)

H Position (in

PC mode)

V Position (in

PC mode)

Dot Clock (in

PC mode)

Skin tone can be changed between -5 and 5.

Adjusts the desired colour tone.

You can configure the colour temperature values using the RGB Gain feature.

Resets the picture settings to factory default settings.(Except Game Mode)

Automatically optimizes the display. Press OK to optimize.

This item shifts the image horizontally to the right hand side or left hand side of the screen.

This item shifts the image vertically towards the top or bottom of the screen.

Dot Clock adjustments correct the interference that appear as vertical banding in dot intensive presentations like spreadsheets or paragraphs or text in smaller fonts.

Phase (in PC mode)

Depending on the resolution and scan frequency that you input to the TV set, you may see a hazy or noisy picture on the screen. In such a case you can use this item to get a clear picture by trial and error method.

While in VGA (PC) mode, some items in Picture menu will be unavailable. Instead, VGA mode settings will be added to the Picture Settings while in PC mode.

English - 49 -

Sound Menu Contents

Volume Adjusts the volume level.

Equalizer

Balance

Headphone

Sound Mode

AVL (Automatic

Volume Limiting)

Selects the equalizer mode. Custom settings can be made only when in user mode.

This setting is used for emphasizing left or right speaker balance.

Sets headphone volume.

You can select a sound mode. (If the selected channel supports).

Function sets the sound to obtain fixed output level between programmes.

Digital Out Sets digital out audio type.

Settings Menu Contents

Conditional Access Controls conditional access modules when available.

Language

Configures language settings (may change depending on the country selected)

P r e f e r r e d a n d c u r r e n t s e t t i n g s will be available. Current settings can be changed only if the broadcaster supports.

Parental

Timers

Date/Time

Sources

Enter correct password to change parental settings. You can easily adjust menu lock, maturity lock(may change depending on the country selected) and child lock in this menu. You can also set new pin number.

Sets sleep timer to turn off the TV after a certain time. Sets timers for selected programmes.

(USB Record)

Sets date and time.

Enables or disables selected source options.

Other Settings: Displays other setting options of the TV set:

Menu Timeout Changes timeout duration for menu screens.

Scan Encrypted

Channels

When this setting is on, the search process will locate the encrypted channels as well.

Blue Background

Software Upgrade

Activates or deactivates the blue background system when the signal is weak or absent.

To ensure that your TV always has the most up to date firmware.

Application Version Displays application version.

Hard of Hearing

Audio Description

Enables any special feature sent from the broadcaster.

Audio description refers to an additional narration track for blind and visually impaired viewers of visual media, including television and movies. You can use this feature, only if the broadcaster supports that additional narration track.

Note: Audio description sound feature cannot be available in recording or time shifting mode..

Auto TV Off

Standby Search

(Optional)

You can set the timeout value of auto off feature. When the timeout value is reached and the TV has not been operated for a selected time, the TV will go into standby mode.

If the Standby Search is set to On, when the TV is in standby mode, available broadcasts will be searched. If the TV locates any new or missing broadcasts, a menu screen will be displayed, asking you whether or not to execute these changes.

Channel list will be updated and changed after this process.

English - 50 -

Store Mode

If you are displaying the TV in a store, you can activate this mode. Whilst Store

Mode is enabled, some items in the TV menu may not be available.

This setting confrigures the power up mode preference.

Power Up Mode

Install and Retune Menu Contents

Displays automatic tuning options.

Automatic Channel

Scan (Retune)

(If available)

Digital Aerial: Searches and stores aerial DVB stations.

Digital Cable: Searches and stores cable DVB stations.

Analogue: Searches and stores analogue stations.

Digital Aerial & Analogue: Searches and stores aerial DVB and analogue stations.

Digital Cable & Analogue: Searches and stores cable DVB and analogue stations.

Manual Channel Scan This feature can be used for direct broadcast entry.

Network Channel Scan Searches for the linked channels in the broadcast system.

Analogue Fine Tune

You can use this setting for fine tuning analogue channels. This feature is not available if no analogue channels are stored.

First Time Installation Deletes all stored channels and settings, resets TV to factory settings.

General TV Operation

Using the Channel List

The TV sorts all stored stations in the Channel List.

You can edit this channel list, set favourites or set active stations to be listed by using the Channel List options.

Configuring Parental Settings

To prohibit viewing of certain programmes, channels and menus can be locked by using the parental control system.

To display parental lock menu options, the PIN number should be entered. The factory default PIN number is

0000 . After coding the correct PIN number, parental settings menu will be displayed.

Menu Lock : Menu lock setting enables or disables the menu access.

Maturity Lock : When set, this option gets the maturity information from the broadcast and if this maturity level is disabled, disables access to the broadcast.

Child Lock : When Child Lock is set, the TV can only be controlled by the remote control. In this case the control panel buttons will not work.

Set PIN

: Defines a new PIN number.

Note: If the Country option is set to France, you can use 4725 as the default code.

Electronic Programme Guide (EPG)

Some, but not all channels send information about the current and next programmes. Press the button to view the EPG menu.

Red button (Prev Day): Displays the programmes of previous day.

Green button (Next day): Displays the programmes of the next day.

Yellow button (Zoom) : Expands programme information.

Blue button (Filter):

Views filtering options.

: Press button to view Select Genre menu.

Using this feature, you can search the programme guide database in accordance with the genre. Info available in the programme guide will be searched and results matching your criteria will be listed.

(i) INFO: Displays, in detailed, information on the programme selected.

Numeric buttons (Jump) : Jumps to the preferred channel directly via numeric buttons.

OK: Displays programme options.

Text (Search): Displays “ Guide Search ” menu.

(Now) : Shows the current programme.

English - 51 -

P+P- : More event info

IMPORTANT: Connect a USB disk to your TV while the TV is switched off. You should then switch on the TV to enable the recording feature.

Note: Switching to a different broadcast or source is not available during a recording.

Programme Options

In EPG menu, press the OK button to enter the

Event Options menu.

Select Channel

In EPG menu, using this option, you can switch to the selected channel.

Set Timer / Delete Timer

After you have selected a programme in the EPG menu, press the OK button. Select the Set Timer on Event option and press the OK button. You can set a timer for future programmes. To cancel an already set timer, highlight that programme and press the OK button. Then select “ Delete Timer ” option. The timer will be cancelled.

Software Upgrade

Your TV is capable of finding and updating automatically via the Aerial/Cable/Satellite signal.

Software upgrade search via user interface

Simply navigate on your main menu. Choose

Settings and select Other Settings menu. In Other

Settings menu navigate on to the Software for

Upgrade item and press OK button to check for a new software upgrade.

3 AM search and upgrade mode

While the TV is connected to an aerial signal. If

Automatic scanning in the Upgrade Options menu is enabled, the TV wakes up at 03:00 and searches broadcast channels for new software upgrades. If new software is found and downloaded successfully, the next time the TV powers up , it will have the new software version.

Note: If the TV fails to come on after the upgrade unplug the

TV for 2 minutes and plug in again.

Troubleshooting & Tips

Tv will not turn on

Make sure the power cord is plugged in securely to wall outlet. The batteries in the remote control may be exhausted. Press the Power button on the TV.

Poor picture

•

Have you selected the correct TV system?

•

Low signal level can cause picture distortion.Please check antenna access.

•

Check if you have entered the correct channel frequency if you have done manual tuning.

•

The picture quality may degrade when two devices are connected to the TV at the same time. In such a case, disconnect one of the devices.

No picture

•

No Picture means that your TV is not receiving a transmission. Have you selected the correct button on the remote control? Try once more. Also make sure the correct input source has been selected.

•

Is the antenna connected properly?

•

Is the antenna cable damaged?

•

Are suitable plugs used to connect the antenna?

•

If you are in doubt, consult your dealer.

No sound

•

Has the TV been set to mute? To cancel mute, press the

“ ” button, or increase the volume level.

•

Sound is coming from only one speaker. Is the balance set to one extreme? See Sound Menu section.

Remote control - does not operate

•

The batteries may be exhausted. Replace the bateries.

Input sources - can not be selected

•

If you cannot select an input source, it is possible that no device is connected. if not

•

Check the AV cables and connections if you have tried to connect a device.

English - 52 -

PC Input Typical Display Modes

The following table is an illustration of some of the typical video display modes. Your TV may not support all resolutions. Your TV supports up to 1920x1080 .

Index

5

6

3

4

7

8

1

2

9

10

11

12

Resolution

640x480

800x600

800x600

1024x768

1024x768

1280x768

1280x960

1280x1024

1360x768

1400x1050

1600x1200

1920x1080

Frequency

60 Hz

56 Hz

60 Hz

60 Hz

66 Hz

60 Hz

60 Hz

60 Hz

60 Hz

60 Hz

60 Hz

60 Hz

AV and HDMI Signal Compatibility

Source

EXT

(SCART)

Side AV

PC/

YPbPr

HDMI1

Supported Signals

PAL 50/60

NTSC 60

RGB 50

RGB 60

PAL 50/60

NTSC 60

480I, 480P 60Hz

576I, 576P

720P

50Hz

50Hz,60Hz

1080I

1080P

480I

480P

576I, 576P

720P

1080I

50Hz,60Hz

50Hz,60Hz

60Hz

60Hz

50Hz

50Hz,60Hz

50Hz,60Hz

1080P

24Hz, 25Hz

30Hz, 50Hz,

60Hz

O

(X: Not Available, O: Available)

In some cases a signal on the LED TV may not be displayed properly. The problem may be an inconsistency with standards from the source equipment (DVD, Set-top box, etc. ). If you do experience such a problem please contact your dealer and also the manufacturer of the source equipment.

O

O

O

O

O

O

O

Available

O

O

O

O

O

O

O

O

O

Supported File Formats for USB Mode

Format

Media File Extension

Movie

Music

Photo

Subtitle

mpg, mpeg vob mp4 mkv avi flv

3gp

.mp3

.jpg .jpeg

.

.bmp

.sub .srt

Video

MPEG1, MPEG2

Audio

Remarks

(Maximum resolution/Bit rate etc.)

MPEG1: 768x576 @30P

MPEG2:1920x1080 @ 30P

MPEG2

MPEG4, Xvid , H.264

H.264, MPEG4,VC-1

MPEG2, MPEG4, Xvid , H.264

1920x1080 @ 30P

H.264/VP6/Sorenson

MPEG4 , H.264

-

Baseline JPEG

Progressive JPEG

-

-

H.264/VP6:1920x1080 @ 30P

Sorenson: 352x288 @30P

1920x1080 @ 30P

MPEG 1 Layer 2

MPEG 1 Layer 3

-

-

32Kbps ~ 448Kbps(Bit rate)

32K, 44.1k, 48k Hz,16K, 22.05K, 24K Hz (Sampling rate)

32Kbps ~ 320Kbps(Bit rate)

32K, 44.1k, 48k Hz,16K, 22.05K, 24K Hz,8K, 11.025K,

12K Hz (Sampling rate) max WxH = 17000x10000 4147200bytes max WxH = 4000x4000 3840000bytes

-

max WxH = 5760x4096 3840000bytes

-

English - 53 -

DVD Mode

Safety Information

CAUTION

DVD Player is a class 1 laser product. This product use a visible laser. This laser could harm when pointed direct to eyes. Be sure to operate the player correctly as instructed.

CLASS 1

LASER PRODUCT

On cleaning

•

Before playing, clean the disc with a cleaning cloth.

Wipe the disc from the center out.

RISK OF ELECTRIC SHOCK

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock of persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Notes on Discs

On handling discs

•

To keep the disc clean, handle the disc by its edge.

Do not touch the surface.

•

Do not stick paper or tape on the disc.

•

If the disc is contaminated with any substance like glue remove before using it.

•

Do not use solvents such as benzine, thinner, commercially available cleaners or anti-static spray intended for vinyl LPs.

Licence Notification

•

This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Rovi Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Rovi Corporation. Reverse engineering and disassembly are prohibited.

How to Watch a DVD

When placing a disc into the loader, labeled side of the disc should be on the front:

•

Do not expose the disc to direct sunlight or heat sources such as hot air ducts, or leave it in a car parked in direct sunlight as the temperature can rise quickly and damage the disc.

•

After playing, store the disc in its case.

When TV set is turned on, first switch to DVD source by using the SOURCE button on the remote control.

Press play on the remote control, or directly press play button at the front panel. If there is no disc inside the loader, place a DVD first and press play.

Note: If you switch to another source by pressing

SOURCE, SWAP or P+/P- buttons on the remote control, DVD playback will be paused automatically.

You should press PLAY and resume the playback manually when you switch to DVD mode.

English - 54 -

DVD Control Panel Buttons

A. Disc loader

B. Play / Pause

Plays/pauses the disc. When DVD menu (root menu) is active, this button functions as

“button select” (selects the highlighted item in menu) if this is not prohibited by the disc.

C. Stop / Eject

Stop playing disc / Eject or Load the disc Note:

•

You cannot eject the disc via the remote control.

• While playing a file, you should press STOP button three times to eject.

1. Standby

2. Numeric buttons

3. TV Menu

4. Navigation buttons

5. OK / Select

6. Back

7. Angel

8. Info

9. Display / DVD Menu

10. Zoom

11. Language selection

12. Subtitle

13. Rapid reverse

14. Play

15. Stop

16. Rapid advance

17. Pause

18. Root

19. Title

20. Repeat

21. Search mode

22. Source

English - 55 -

General Operation

You can operate DVD, movie CD, music or picture CD’s content by using the proper buttons on your remote control. Below are main functions of commonly used remote control buttons.

Buttons on the

Remote Control

DVD

Playback

Play

Movie

Playback

Play

Picture

Playback

Play

Music Playback

Play

/

/

/

MY BUTTON1

INFO

LANG.

MENU

OK / SELECT

GREEN

RETURN

YELLOW

SWAP

MY BUTTON2

SUBTITLE

BLUE

RED

+

[ + ] +

+

+

+

Pause Pause Pause Pause

Stop Stop Stop Stop

Skip backward/ forward

Skip backward/ forward

Rotate Skip backward/forward

Highlights a menu item / Shifts the zoomed picture up or down (if available).

Fast reverse / Fast forward

Views the scene from different angles (if available)

Changes slide effect

(depends on the content)

Displays time / Views main setup menu

X

Time counter mode selection (during playback). Press repeatedly to switch between modes.

Audio language.

X X

Displays TV menu.

Enter / View / Play

Displays repeat options.

Returns back to the previous menu (if available).

Goes back to the root folder (if available).

Direct selection of scenes or time.

Selects the desired file.

Subtitle on-off. Press repeatedly to switch between subtitle options.

X

Media source selection.

Selects the desired file.

X

Displays disc menu (if available).

Displays disc menu

(if available).

X

Zooms picture. Press repeatedly to switch between zoom options.

X

Other Functions – Button Combinations (During playback)

Slow forward.

Sets slow forward speed.

Sets fast forward speed.

Sets fast reverse speed.

Confirms stop command.

(*) You can switch to title by pressing numeric keys directly. You need to press 0 and then digit key to switch one digit titles (example: to select 5, press 0 and 5).

English - 56 -

General Playback

Basic Play

1. Press on the power button

2. Please insert a disc to the loader.

The disc will be automatically loaded and play commences if the disc does not have any menus recorded on it.

A menu may appear on the TV screen after a few moments or the film may start immediately after the introduction of the Film Company. This behaviour depends on the disc content and may change.

Note: Step 3 and 4 is available only when a menu is recorded on the disc.

3. Press “ ” / “ ” / / or the number button

(s) to select the preferred title.

4. Press OK.

Play of the selected items now starts. The played item may be a motion picture, a still picture or another submenu depending on the disc.

For your reference:

If an action corresponding to a button is prohibited the “

” symbol appears.

Notes on Playback:

1. No sound will be heard during Rapid advance or Rapid reverse.

2. No sound will be heard during Slow motion play.

3. Reverse slow motion play is not available.

4. In some cases, the subtitle language is not changed immediately to the selected one.

5. When the preferred language is not selected even after pressing the button several times, it means that the language is not available on the disc.

6. When the player is restarted or the disc is changed, the subtitle selection is automatically changed back to the initial settings.

7. If a language is selected, not supported by the disc, the subtitle language will automatically be set to the disc’s priority language.

8. Usually a circulation will happen while switching to another language, that is you can cancel the subtitle by pressing this button a number of times until “Subtitle Off” appears on the screen.

9. When the power is turned on or the disc is removed, the language heard is the one selected at the initial settings. If this language is not recorded on the disc, only the available language on the disc will be heard.

10. Some DVDs may not contain root and/or title menus.

11. Reverse stepping is not available.

12. For your convenience:

If you attempt to enter a number greater than the total time of the current title, the time search box disappears and “ Input Invalid” message appears on up-left corner of screen.

13. Slide Show is disabled when the ZOOM mode is on.

DVD Troubleshooting

The picture quality is poor (DVD)

•

Make sure the DVD disc surface is not damaged.

(Scratch, fingerprint etc.)

•

Clean the DVD disc and try again.

See instructions described in “Notes on Discs” to clean your disc properly.

•

Ensure that the DVD disc is in the drawer with the label uppermost.

•

A damp DVD disc or condensation may effect the equipment. Wait for 1 to 2 hours in Stand-by to dry the equipment.

Disc does not play

•

No disc in the machine. Place a disc into the loader.

•

Disc incorrectly loaded.

Ensure that the DVD disc is in the drawer with the label uppermost.

•

Wrong type of disc. The machine cannot play CD-

ROMS etc.• The region code of the DVD must match the player.

Wrong OSD language

•

Select the language in the set-up menu.

•

The language for the sound or subtitles on a DVD cannot be changed.

•

Multilingual sound and/or subtitles not recorded on the DVD.

•

Try to change the sound or subtitles using DVD’s title menu. Some DVD’s do not allow the user to change these settings without using the disc’s menu

•

These functions are not available on the DVD.

No picture

•

Have you pressed the correct buttons on the remote control? Try once more.

No sound

•

Check the volume is set to an audible level.

•

Make sure you have not switched the sound off accidentally.

Distorted sound

•

Check that the appropriate listening mode setting is correct.

If nothing works

If you have tried the above solutions and none seem to work, try switching your TV-DVD off and on again.

If this does not work, contact your supplier or TV-DVD repair technician. Never attempt to repair a defective

TV-DVD yourself.

English - 57 -

Disc Types Compatible with This Unit

Disc Types

(Logos)

Recording

Types

Disc

Size

Max. Playing

Time

DVD

Audio

+

Video

12 cm

Singlesided; 240 min.

Doublesided; 480 min.

AUDIO-CD

MP3-CD

Audio

Audio

(xxxx.mp3)

12 cm

12 cm

74 min.

It depends on MP3 quality.

Characteristics

•

DVD contains excellent sound and video due to Dolby Digital and MPEG-2 System.

•

Various screen and audio functions can be easily selected through the on screen menu.

•

An LP is recorded as an analog signal with more distortion. CD is recorded as a Digital Signal with better audio quality,

Iess distortion and less deterioration of audio quality over time.

•

MP3 is recorded as a Digital Signal with better audio quality, less distortion and less deterioration of audio quality over time.

PICTURE-CD

Video

(still picture)

12 cm

It depends on JPEG quality.

•

JPEG is recorded as a Digital Signal with better picture quality over time.

For proper operation, only 12 cm discs must be used.

Specifications

Types of Discs

Supported

Video Type

Audio Type

Audio Output

DVD: SS/SL 4.7” (DVD-5)

SS/DL 4.7” (DVD-9)

DS/SL 4.7” (DVD-10)

CD-DA

CD-R

CD-RW

DS/DL 4.7” (DVD-18) MP-3/JPEG

MPEG-2 Video Standard Decoding (MPEG-1 supported)

Full-Screen Video Display of 720 x 576 (PAL) & 720 x 480 (NTSC) pixels

50 and 60 Hz frame refresh rates (PAL & NTSC)

Digital bit-stream processing rate up to 108Mbits/sec

Line resolution more than 500 lines

MPEG Multichannel Decoding

LPCM

Analog Outputs:

24 bit /48, 44.1kHz down-sampling DAC

English - 58 -