advertisement
▼
Scroll to page 2
of 32
KESB9310L EN Dishwasher User Manual 2 www.electrolux.com CONTENTS 1. SAFETY INFORMATION....................................................................................2 2. SAFETY INSTRUCTIONS..................................................................................4 3. PRODUCT DESCRIPTION................................................................................ 6 4. CONTROL PANEL............................................................................................. 7 5. PROGRAMME SELECTION.............................................................................. 8 6. BASIC SETTINGS ........................................................................................... 10 7. BEFORE FIRST USE....................................................................................... 13 8. DAILY USE....................................................................................................... 15 9. HINTS AND TIPS............................................................................................. 17 10. CARE AND CLEANING..................................................................................18 11. TROUBLESHOOTING....................................................................................22 12. TECHNICAL INFORMATION......................................................................... 26 WE’RE THINKING OF YOU Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time. Welcome to Electrolux. Visit our website: Get usage advice, brochures, trouble shooter, service information: www.electrolux.com.cn CUSTOMER CARE AND SERVICE Always use original spare parts. When contacting our Authorised Service Centre, ensure that you have the following data available: Model, PNC, Serial Number. The information can be found on the rating plate. Warning / Caution-Safety information General information and tips Environmental information Subject to change without notice. 1. SAFETY INFORMATION Please be sure to operate the appliance in accordance with the supplied instructions otherwise safety incidents may occur. Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or ENGLISH 3 usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Juveniles and vulnerable people safety • • • • • • The juveniles aged under 8 years shall not use this appliance. This appliance can be used by juveniles aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction by their guardians with relevant experience and knowledge concerning the use of the appliance in a safe way and understand the hazards involved. Juveniles and persons with reduced physical, sensory or mental capabilities shall be kept away unless continuously supervised by their guardians. Do not let juveniles play with the appliance. Keep detergents away from juveniles. Keep juveniles and pets away from the appliance when the door is open. Juveniles and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge shall not carry out cleaning and user maintenance of the appliance. 1.2 General Safety • • • • This appliance is intended to be used in household and similar applications such as: – farm houses; staff kitchen areas in shops, offices and other working environments; – by clients in hotels, motels, bed & breakfast and other residential type environments. Do not change the specification of this appliance. The operating water pressure (minimum and maximum) must be between 0.5 (0.05) / 8 (0.8) bar (MPa) Follow the maximum number of 15 place settings. 4 www.electrolux.com • • • • • • • If the supply cord is damaged, it must be replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard. Put the cutlery in the cutlery basket with the sharp ends pointing down or put them in the cutlery drawer in a horizontal position with the sharp edges down. Do not leave the appliance with the open door unattended to avoid stepping accidentally onto it. Before any maintenance operation, deactivate the appliance and disconnect the mains plug from the socket. Do not use high pressure water sprays and/or steam to clean the appliance. If the appliance has ventilation openings in the base, they must not be covered e.g. by a carpet. The appliance is to be connected to the water mains using the new supplied hose-sets. Old hose sets must not be reused. 2. SAFETY INSTRUCTIONS 2.1 Installation www.youtube.com/electrolux www.youtube.com/aeg WARNING! Only a qualified person must install this appliance. • • • • • • • Remove all the packaging. Do not install or use a damaged appliance. Do not use the appliance before installing it in the built-in structure due to safety manner. Follow the installation instructions supplied with the appliance. Always take care when moving the appliance as it is heavy. Always use safety gloves and enclosed footwear. Do not install or use the appliance where the temperature is less than 0 °C. Install the appliance in a safe and suitable place that meets installation requirements. How to install your 60 cm Dishwasher Sliding Hinge 2.2 Electrical connection WARNING! Risk of fire and electric shock. • • • • • The appliance must be earthed. Make sure that the parameters on the rating plate are compatible with the electrical ratings of the mains power supply. Always use a correctly installed shockproof socket. Do not use multi-plug adapters and extension cables. Make sure not to cause damage to the mains plug and to the mains cable. Should the mains cable need to ENGLISH • • • be replaced, this must be carried out by our Authorised Service Centre. Connect the mains plug to the mains socket only at the end of the installation. Make sure that there is access to the mains plug after the installation. Do not pull the mains cable to disconnect the appliance. Always pull the mains plug. This appliance is fitted with a 10 A mains plug. 2.3 Water connection • • • • Do not cause damage to the water hoses. Before connection to new pipes, pipes not used for a long time, where repair work has been carried out or new devices fitted (water meters, etc.), let the water flow until it is clean and clear. Ensure that there are no visible water leaks during and after the first use of the appliance. The water inlet hose has a safety valve and a sheath with an inner mains cable. • • • • • 5 Dishwasher detergents are dangerous. Follow the safety instructions on the detergent packaging. Do not drink and play with the water in the appliance. Do not remove the dishes from the appliance until the programme is complete. Some detergent may remain on the dishes. Do not store items or apply pressure on the open door of the appliance. The appliance can release hot steam if you open the door while a programme operates. 2.5 Service • • • To repair the appliance contact the Authorised Service Centre. Use original spare parts only. Please note that self-repair or nonprofessional repair can have safety consequences and might void the guarantee. Concerning the lamp(s) inside this product and spare part lamps sold separately: These lamps are intended to withstand extreme physical conditions in household appliances, such as temperature, vibration, humidity, or are intended to signal information about the operational status of the appliance. They are not intended to be used in other applications and are not suitable for household room illumination. 2.6 Disposal • WARNING! Dangerous voltage. If the water inlet hose is damaged, immediately close the water tap and disconnect the mains plug from the mains socket. Contact the Authorised Service Centre to replace the water inlet hose. 2.4 Use • Do not put flammable products or items that are wet with flammable products in, near or on the appliance. WARNING! Risk of injury or suffocation. • • • Disconnect the appliance from the mains supply. Cut off the mains cable and discard it. Remove the door catch to prevent children and pets to get closed in the appliance. 6 www.electrolux.com 3. PRODUCT DESCRIPTION 1 2 3 12 11 10 1 2 3 4 5 6 7 9 8 Ceiling spray arm Upper spray arm Lower spray arm Filters Rating plate Salt container Air vent 3.1 Beam-on-Floor (地板投影) The Beam-on-Floor(地板投影)is a light that is displayed on the floor below the appliance door. • • A red light comes on when a programme starts. It remains on for the duration of the programme. A green light comes on when the programme is complete. 7 8 9 10 11 12 • 6 5 4 Rinse aid dispenser Detergent dispenser Lower basket Upper basket Cutlery drawer The red light flashes when the appliance has a malfunction. The Beam-on-Floor (地板投 影)is off when the appliance is deactivated. ENGLISH 7 4. CONTROL PANEL 1 1 2 3 4 2 4 3 On/Off button / Reset button 延时启动 button Display 滑动时控 selection bar 4.1 Display 5 6 5 附加功能 buttons 6 智能洗 program button 4.2 节能程度 A The 节能程度 indicates how the programme selection impacts energy and water consumption. The more bars are on, the lower the consumption is. B C A. 节能程度 B. Indicators C. Time indicator B indicates the most environmentally friendly programme selection for a normally soiled load. 4.3 Indicators Indicator Description Rinse aid indicator. It is on when the rinse aid dispenser needs refill‐ ing. Refer to "Before first use". Salt indicator. It is on when the salt container needs refilling. Refer to "Before first use". Machine Care (自清洁) indicator. It is on when the appliance needs internal cleaning with the Machine Care (自清洁) programme. Re‐ fer to "Care and cleaning". Drying phase indicator. It is on when a programme with the drying phase is selected. It flashes when the drying phase operates. Refer to "Programme selection". 8 www.electrolux.com 5. PROGRAMME SELECTION 5.1 滑动时控 5.2 附加功能 Using 滑动时控 selection bar, you can select a suitable wash cycle based on programme duration, ranging from 30 minutes to four hours. You can adjust the programme selection to your needs by activating 附加功能. 加强除菌 加强除菌 provides better hygiene results by keeping the temperature between 65 and 70 °C for at least 10 minutes during the last rinsing phase. A A. • • B. C. D. E. B C D E 快速 is the shortest programme (30min ) suitable for washing a load with fresh and light soil. 预冲洗 (15min ) is a programme for rinsing off food remains from the dishes. It prevents odours forming in the appliance. Do not use detergent with this programme. 1h is a programme suitable for washing a load with fresh and lightly dried-on soil. 1h 30min is a programme suitable for washing and drying normally soiled items. 2h 40min is a programme suitable for washing and drying heavily soiled items. 节能 is the longest programme (4h) offering the most efficient use of energy and water consumption for crockery and cutlery with normal soil. This is the standard programme for test institutes. 1) 加强漂洗 加强漂洗 improves the washing results of the selected programme. The option increases the wash temperature and duration. 晶柔呵护 晶柔呵护 provides special care for a delicate load. The option prevents rapid changes in the wash temperature of the selected programme and reduces it to 45 °C. This protects glassware in particular from damaging. 5.3 智能洗 The 智能洗 program automatically adjusts the wash cycle to the type of load. The appliance senses the degree of soil and the amount of dishes in the baskets. It adjusts the temperature and quantity of water as well as the wash duration. 1) The values on the China Water Efficiency Label are based on 节能 programme testing. ENGLISH 5.4 Programmes overview Pro‐ gramme Type of load Degree of soil Programme phases 附加功能 快速 • • Crockery Cutlery • Fresh • • • • Wash 50 °C • Intermediate rinse • Final rinse 45 °C • AirDry (空气对流 干燥) • All types of loads • All de‐ grees of soil • Prewash 1h • • Crockery Cutlery • • Fresh Lightly dried-on • • • • Wash 60 °C • Intermediate rinse • Final rinse 50 °C • AirDry (空气对流 干燥) 加强漂洗 晶柔呵护 加强除菌 1h 30min • • • • Crockery Cutlery Pots Pans • • Normal Lightly dried-on • • • • • Wash 60 °C • Intermediate rinse • Final rinse 55 °C • Drying AirDry (空气对流 干燥) 加强漂洗 晶柔呵护 加强除菌 2h 40min • • • • Crockery Cutlery Pots Pans • Normal to heavy Dried-on • • • • • • Prewash • Wash 60 °C • Intermediate rinse • Final rinse 60 °C Drying AirDry (空气对流 干燥) 加强漂洗 晶柔呵护 加强除菌 节能 • • • • Crockery Cutlery Pots Pans • • Normal Lightly dried-on • • • • • • Prewash • Wash 50 °C • Intermediate rinse • Final rinse 55 °C Drying AirDry (空气对流 干燥) 加强漂洗 晶柔呵护 加强除菌 智能洗 • • • • Crockery Cutlery Pots Pans The pro‐ gramme ad‐ justs to all de‐ grees of soil. • • • • • • Prewash 附加功能 are not Wash 50 - 60 °C applicable to this Intermediate rinse programme. Final rinse 60 °C Drying AirDry (空气对流 干燥) Machine Care (自 清洁) • No load The pro‐ gramme cleans the appliance in‐ terior. • • • • Wash 70 °C 附加功能 are not Intermediate rinse applicable to this Final rinse programme. AirDry (空气对流 干燥) 预冲洗 • 加强漂洗 晶柔呵护 加强除菌 附加功能 are not applicable to this programme. 9 10 www.electrolux.com Consumption values Water (l) Energy (kWh) Duration (min) 快速 9.5 - 11.6 0.52 - 0.64 30 预冲洗 4.3 - 5.3 0.01 - 0.04 15 1h 10.5 - 12.9 0.92 - 1.06 60 1h 30min 11.6 - 14.2 1.00 - 1.15 90 2h 40min 11 - 13.5 1.12 - 1.26 160 节能 11.9 0.847 240 智能洗 12.1 1.109 170 Machine Care (自 清洁) 9.7 - 11.8 0.60 - 0.73 60 Programme 1) 2) 1) The pressure and the temperature of the water, the variations of the mains supply, the options, the quantity of dishes and the degree of soil can change the values. 2) The values for programmes other than 节能 are indicative only. Information for test institutes To receive the necessary information for conducting performance tests (e.g. according to GB/T 20290-2016), send an email to: In your request, please include the product number code (PNC) found on the rating plate. For any other questions regarding your dishwasher, please refer to the service book provided with your appliance. [email protected] 6. BASIC SETTINGS You can configure the appliance by changing basic settings according to your needs. Number Setting Values Description1) 1 Water hard‐ ness From level 1L to level 10L (default: 5L) Adjust the level of the water softener ac‐ cording to the water hardness in your area. 2 Rinse aid level From level 0A Adjust the level of the rinse aid accord‐ to level 6A (de‐ ing to the necessary dosage. fault: 4A) 3 End sound On Off (default) 4 Auto door open On (default) Off Activate or deactivate the acoustic signal for the end of a programme. Activate or deactivate the AirDry (空气 对流干燥) . ENGLISH Number Setting Values Description1) 5 Key tones On (default) Off Activate or deactivate the sound of the buttons when pressed. 6 Latest pro‐ On gramme selec‐ Off (default) tion Enable or disable the automatic selec‐ tion of the most recently used pro‐ gramme and options. 11 1) For more details, refer to the information provided in this chapter. You can change the basic settings in setting mode. Use OK to enter the selected setting and to confirm changing its value. When the appliance is in setting mode, the bars of the 节能程度 represent available settings. For each setting, a dedicated bar of the 节能程度 flashes. How to enter setting mode The order of the basic settings presented in the table is also the order of the settings on the 节能程度: You can enter setting mode before starting a programme. You cannot enter setting mode while the programme is running. To enter setting mode, press and hold simultaneously and for about 3 seconds. The lights related to the Previous, OK and Next are on. How to change a setting 1 2 3 4 5 6 Make sure the appliance is in setting mode. 6.1 Setting mode How to navigate in setting mode You can navigate in setting mode using 滑动时控 selection bar. A B C A. Previous button B. OK button C. Next button Use Previous and Next to switch between the basic settings and to change their value. 1. Use Previous or Next to select the bar of the 节能程度 dedicated to the desired setting. • The bar of the 节能程度 dedicated to the chosen setting flashes. • The display shows the current setting value. 2. Press OK to enter the setting. • The bar of the 节能程度 dedicated to the chosen setting is on. The other bars are off. • The current setting value flashes. 3. Press Previous or Next to change the value. 4. Press OK to confirm the setting. • The new setting is saved. • The appliance returns to the basic settings list. 5. Press and hold simultaneously and for about 3 seconds to exit setting mode. The appliance returns to the programme selection. 12 www.electrolux.com The saved settings remain valid until you change them again. your area. Your local water authority can advise you on the hardness of the water in your area. It is important to set the right level of the water softener to assure good washing results. 6.2 The water softener The water softener removes minerals from the water supply, which would have a negative effect on the washing results and on the appliance. Softening hard water increases the consumption of water and energy as well as the programme duration. The higher the level of water softener, the higher the consumption and the longer the duration. The higher the content of these minerals, the harder your water is. Water hardness is measured in equivalent scales. The water softener should be adjusted according to the hardness of the water in Water hardness German de‐ grees (°dH) French de‐ grees (°fH) mmol/l Clarke de‐ grees Water softener level 47 - 50 84 - 90 8.4 - 9.0 58 - 63 10 43 - 46 76 - 83 7.6 - 8.3 53 - 57 9 37 - 42 65 - 75 6.5 - 7.5 46 - 52 8 29 - 36 51 - 64 5.1 - 6.4 36 - 45 7 23 - 28 40 - 50 4.0 - 5.0 28 - 35 6 19 - 22 33 - 39 3.3 - 3.9 23 - 27 5 1) 15 - 18 26 - 32 2.6 - 3.2 18 - 22 4 11 - 14 19 - 25 1.9 - 2.5 13 - 17 3 4 - 10 7 - 18 0.7 - 1.8 5 - 12 2 <4 <7 <0.7 <5 1 2) 1) Factory setting. 2) Do not use salt at this level. Regardless of the type of detergent used, set the proper water hardness level to keep the salt refill indicator active. Multi-tabs containing salt are not effective enough to soften hard water. 6.3 The rinse aid level The rinse aid helps to dry the dishes without streaks and stains. It is automatically released during the hot rinse phase. It is possible to set the released quantity of rinse aid. When rinse aid chamber is empty, the rinse aid indicator is on notifying to refill rinse aid. If the drying results are satisfactory while using multi-tablets only, it is possible to deactivate the dispenser and the indicator. However, for best drying performance, always use rinse aid and keep the rinse aid indicator active. To deactivate the rinse aid dispenser and indicator, set the level of rinse aid to 0A. 6.4 End sound You can activate an acoustic signal that sounds when the programme is completed. ENGLISH Acoustic signals sound also when a malfunction of the appliance occurs. It is not possible to deactivate these signals. 6.5 AirDry (空气对流干燥) AirDry (空气对流干燥) improves the drying results. The appliance door opens automatically during the drying phase and remains ajar. 13 CAUTION! If children have access to the appliance, we advise to deactivate AirDry (空气对流 干燥) . The automatic opening of the door may pose a danger. When AirDry (空气对流干 燥) opens the door, Beamon-Floor (地板投影) might not be completely visible. To see if the programme is complete, look at the control panel. 6.6 Key tones The buttons on the control panel make a click sound when you press them. You can deactivate this sound. 6.7 Latest programme selection AirDry (空气对流干燥) is automatically activated with all programmes other than 预冲洗. The duration of the drying phase and the door opening time vary depending on the selected programme and options. When AirDry (空气对流干燥) opens the door, the display shows the remaining time of the running programme. You can set the automatic selection of the most recently used programme and options. The latest programme that was completed before the appliance deactivation is saved. It is then selected automatically after you activate the appliance. When the latest programme selection is disabled, the default programme is 节能. CAUTION! Do not try to close the appliance door within 2 minutes after automatic opening. This can cause damage to the appliance. 7. BEFORE FIRST USE 1. Make sure that the current level of the water softener agrees with the hardness of the water supply. If not, adjust the level of the water softener. 2. Fill the salt container. 3. Fill the rinse aid dispenser. 4. Open the water tap. 5. Start the programme 快速 to remove any residuals from the manufacturing process. Do not use detergent and do not put dishes in the baskets. After starting the programme, the appliance recharges the resin in the water softener for up to 5 minutes. The washing phase starts only after this procedure is complete. The procedure is repeated periodically. 14 www.electrolux.com 7.1 The salt container CAUTION! Use rough salt designed for dishwashers only. Fine salt increases the risk of corrosion. 7.2 How to fill the rinse aid dispenser A B The salt is used to recharge the resin in the water softener and to assure good washing results in daily use. How to fill the salt container 1. Turn the cap of the salt container counterclockwise and remove it. 2. Put 1 litre of water in the salt container (only for the first time). 3. Fill the salt container with dishwasher salt (until it is full). C CAUTION! The compartment (B) is for rinse aid only. Do not fill it with detergent. CAUTION! Only use rinse aid designed specifically for dishwashers. 4. Carefully shake the funnel by its handle to get the last granules inside. 5. Remove the salt around the opening of the salt container. 1. Open the lid (C). 2. Fill the dispenser (B) until the rinse aid reaches the marking ''MAX''. 3. Remove the spilled rinse aid with an absorbent cloth to prevent excessive foam formation. 4. Close the lid. Make sure that the lid locks into position. Fill the rinse aid dispenser when the indicator (A) is clear. 6. Turn the cap of the salt container clockwise to close the salt container. CAUTION! Water and salt can come out of the salt container when you fill it. After you fill the salt container, immediately start the shortest programme to prevent corrosion. Do not put dishes in the baskets. ENGLISH 15 8. DAILY USE 1. Open the water tap. 2. Press and hold until the appliance is activated. 3. Fill the salt container if it is empty. 4. Fill the rinse aid dispenser if it is empty. 5. Load the baskets. 6. Add the detergent. 7. Select and start a programme. 8. Close the water tap when the programme is complete. 8.1 Using the detergent A B C CAUTION! Only use detergent specifically designed for dishwashers. 1. Press the release button (A) to open the lid (C). 2. Put the detergent (gel, powder or tablets) in the compartment (B). 3. If the programme has a prewash phase, put a small quantity of detergent on the inner part of the appliance door. 4. Close the lid. Make sure that the lid locks into position. For information about the detergent dosage, refer to the manufacturer's instructions on the packaging of the product. Usually, 20 - 25 ml of gel detergent is adequate for washing a load with normal soil. The upper ends of the two vertical ribs inside the compartment (B) indicate the maximum level for filling the dispenser with gel (max. 30ml). 8.2 How to select and start a programme using 滑动时控 selection bar 1. Slide your finger across 滑动时控 selection bar to choose a suitable programme. • The light related to the selected programme is on. • The 节能程度 indicates the level of energy and water consumption. • The display shows the programme duration. 2. Activate applicable 附加功能 if desired. 3. Close the appliance door to start the programme. 8.3 How to select and start the programme 预冲洗 1. To select 预冲洗, press and hold for 3 seconds. The light related to the button is on. • The 节能程度 is off. • The display shows the programme duration. 2. Close the appliance door to start the programme. • 8.4 How to activate 附加功能 1. Select a programme using 滑动时控 selection bar. 2. Press the button dedicated to the option you want to activate. • The light related to the button is on. • The display shows the updated programme duration. • The 节能程度 indicates the updated level of energy and water consumption. 16 www.electrolux.com By default, options must be activated every time before you start a programme. If the latest programme selection is enabled, the saved options are activated automatically along with the programme. It is not possible to activate or deactivate options while a programme is running. Not all options are compatible with each other. Activating options often increases the water and energy consumption as well as the programme duration. 8.5 How to start the 智能洗 program 1. Press . • The light related to the button is on. • The display shows the longest possible program duration. 滑动时控 and 附加功能 are not applicable to this program. 2. Close the appliance door to start the program. The appliance senses the type of load and adjusts a suitable wash cycle. During the cycle, the sensors operate several times and the initial program duration can decrease. 8.6 How to delay the start of a programme 1. Select a programme. 2. Press repeatedly until the display shows the desired delay time (from 1 to 24 hours). The light related to the button is on. 3. Close the appliance door to start the countdown. During the countdown, it is not possible to change the delay time and the programme selection. When the countdown is complete, the programme starts. 8.7 How to cancel the delay start while the countdown operates Press and hold for about 3 seconds. The appliance returns to the programme selection. If you cancel the delay start, you have to select the programme again. 8.8 How to cancel a running programme Press and hold for about 3 seconds. The appliance returns to the programme selection. Make sure that there is detergent in the detergent dispenser before you start a new programme. 8.9 Opening the door while the appliance operates Opening the door while a programme is running stops the appliance. It may affect the energy consumption and the programme duration. After closing the door, the appliance continues from the point of interruption. If the door is opened for more than 30 seconds during the drying phase, the running programme ends. It does not happen if the door is opened by AirDry (空气对 流干燥) function. 8.10 The Auto Off (自动关机) function This function saves energy by switching the appliance off when it is not operating. ENGLISH The function comes into operation automatically: • When the programme is completed. • After 5 minutes if a programme was not started. 17 The Auto Off (自动关机) function switches the appliance off automatically. All buttons are inactive except for the on/off button. 8.11 End of the programme When the programme is complete, the display shows 0:00. 9. HINTS AND TIPS 9.1 General – Use the recommended dosage of the detergent and rinse aid. – Make sure that the current level of the water softener agrees with the hardness of the water supply. – Follow the instructions in the chapter "Care and cleaning". Follow the hints below to ensure optimal cleaning and drying results in daily use and to protect the environment. • • • • • • • • • Washing dishes in the dishwasher as instructed in the user manual usually consumes less water and energy than washing dishes by hand. Load the dishwasher to its full capacity to save water and energy. For best cleaning results, arrange items in the baskets as instructed in the user manual and do not overload the baskets. Do not pre-rinse dishes by hand. It increases the water and energy consumption. When needed, select a programme with a prewash phase. Remove larger residues of food from the dishes and empty cups and glasses before putting them inside the appliance. Soak or slightly scour cookware with firmly cooked-on or baked-on food before washing it in the appliance. Make sure that items in the baskets do not touch or cover each other. Only then can the water completely reach and wash the dishes. You can use dishwasher detergent, rinse aid and salt separately or you can use the multi-tablets (e.g. ''All in 1''). Follow the instructions on the packaging. Select a programme according to the type of load and the degree of soil. 节 能 offers the most efficient use of water and energy consumption. To prevent limescale buildup inside the appliance: – Refill the salt container whenever necessary. 9.2 Using salt, rinse aid and detergent • • • • • Only use salt, rinse aid and detergent designed for dishwasher. Other products can cause damage to the appliance. In areas with hard and very hard water, we recommend to use basic dishwasher detergent (powder, gel, tablets containing no additional agents), rinse aid and salt separately for optimal cleaning and drying results. Detergent tablets do not fully dissolve with short programmes. To prevent detergent residues on the tableware, we recommend that you use tablets with long programmes. Always use the correct quantity of detergent. Insufficient dosage of detergent can result in poor cleaning results and hard-water filming or spotting on the items. Using too much detergent with soft or softened water results in detergent residues on the dishes. Adjust the amount of detergent based on the water hardness. Refer to the instructions on the detergent packaging. Always use the correct quantity of rinse aid. Insufficient dosage of rinse aid decreases the drying results. Using too much rinse aid results in bluish layers on the items. 18 www.electrolux.com • Make sure that the water softener level is correct. If the level is too high, the increased quantity of salt in the water might result in rust on cutlery. 9.3 What to do if you want to stop using multi-tablets Before you start using separately detergent, salt and rinse aid, complete the following steps: 1. Set the highest level of the water softener. 2. Make sure that the salt and rinse aid containers are full. 3. Start the 快速 programme. Do not add detergent and do not put dishes in the baskets. 4. When the programme is completed, adjust the water softener according to the water hardness in your area. 5. Adjust the released quantity of rinse aid. 9.4 Before starting a programme Before you start the selected programme, make sure that: • • • • • • • The filters are clean and correctly installed. The cap of the salt container is tight. The spray arms are not clogged. There is enough salt and rinse aid (unless you use multi-tablets). The arrangement of the items in the baskets is correct. The programme is suitable to the type of load and the degree of soil. The correct quantity of detergent is used. 9.5 Loading the baskets • • • • • • • • • • Always use the whole space of the baskets. Use the appliance to wash dishwasher-safe items only. Do not wash in the appliance items made of wood, horn, aluminium, pewter and copper as they could crack, warp, get discoloured or pitted. Do not wash in the appliance items that can absorb water (sponges, household cloths). Put hollow items (cups, glasses and pans) with the opening facing downwards. Make sure that glass items do not touch each other. Put light items in the upper basket. Make sure that the items do not move freely. Put cutlery and small items in the cutlery drawer. Move the upper basket upwards to accommodate large items in the lower basket. Make sure that the spray arms can move freely before you start a programme. 9.6 Unloading the baskets 1. Let the tableware cool down before you remove it from the appliance. Hot items can be easily damaged. 2. First remove items from the lower basket, then from the upper basket. After the programme is completed, water can still remain on the inside surfaces of the appliance. 10. CARE AND CLEANING WARNING! Before any maintenance other than running the programme Machine Care (自清洁) , deactivate the appliance and disconnect the mains plug from the main socket. Dirty filters and clogged spray arms negatively affect the washing results. Check these elements regularly and, if necessary, clean them. ENGLISH 10.1 Machine Care (自清洁) Machine Care (自清洁) is a programme designed to clean the appliance interior with optimal results. It removes limescale and grease buildup. When the appliance senses the need for is on. Start the cleaning, the indicator Machine Care (自清洁) programme to clean the appliance interior. • • 19 Only use neutral detergents. Do not use abrasive products, abrasive cleaning pads or solvents. 10.4 Cleaning the filters The filter system is made of 3 parts. C How to start the Machine Care (自清洁) programme Before starting the Machine Care (自清洁) programme, clean the filters and spray arms. 1. Use a descaler or a cleaning product designed specifically for dishwashers. Follow the instructions on the packaging. Do not put dishes in the baskets. 2. Press and hold simultaneously and B A 1. Turn the filter (B) counterclockwise and remove it. for about 3 seconds. and flash. The The indicators display shows the programme duration. 3. Close the appliance door to start the programme. When the programme is complete, the indicator is off. 10.2 Internal cleaning • • • • Carefully clean the appliance, including the rubber gasket of the door, with a soft damp cloth. Do not use abrasive products, abrasive cleaning pads, sharp tools, strong chemicals, scourer or solvents. To maintain the performance of your appliance, use a cleaning product designed specifically for dishwashers at least once every two months. Carefully follow the instructions on the packaging of the product. For optimal cleaning results, start the Machine Care (自清洁) programme. 10.3 External cleaning • Clean the appliance with a moist soft cloth. 2. Remove the filter (C) out of filter (B). 3. Remove the flat filter (A). 4. Wash the filters. 20 www.electrolux.com 10.5 Cleaning the lower spray arm We recommend to clean the lower spray arm regularly to prevent soil from clogging the holes. Clogged holes can cause unsatisfactory washing results. 1. To remove the lower spray arm, pull it upwards. 5. Make sure that there are no residues of food or soil in or around the edge of the sump. 6. Put back in place the flat filter (A). Make sure that it is correctly positioned under the 2 guides. 2. Wash the spray arm under running water. Use a thin pointed tool, e.g. a toothpick, to remove particles of soil from the holes. 7. Reassemble the filters (B) and (C). 8. Put back the filter (B) in the flat filter (A). Turn it clockwise until it locks. 3. To install the spray arm back, press it downwards. CAUTION! An incorrect position of the filters can cause bad washing results and damage to the appliance. ENGLISH 21 10.6 Cleaning the upper spray arm We recommend to clean the upper spray arm regularly to prevent soil from clogging the holes. Clogged holes can cause unsatisfactory washing results. 1. Pull out the upper basket. 2. To detach the spray arm from the basket, press the spray arm upwards and simultaneously turn it clockwise. 10.7 Cleaning the ceiling spray arm We recommend to clean the ceiling spray arm regularly to prevent soil from clogging the holes. Clogged holes can cause unsatisfactory washing results. The ceiling spray arm is placed on the ceiling of the appliance. The spray arm (C) is installed in the delivery tube (A) with the mounting element (B). 3. Wash the spray arm under running water. Use a thin pointed tool, e.g. a toothpick, to remove particles of soil from the holes. C B A 1. Remove the stoppers from the sliding rails of the cutlery drawer and pull the drawer out. 4. To install the spray arm back, press the spray arm upwards and simultaneously turn it counterclockwise until it locks into place. 1 2 22 www.electrolux.com 2. Move the upper basket to the lowest level to reach the spray arm more easily. 3. To detach the spray arm (C) from the delivery tube (A), turn the mounting element (B) counterclockwise and pull the spray arm downwards. 4. Wash the spray arm under running water. Use a thin pointed tool, e.g. a toothpick, to remove particles of soil from the holes. Run the water through the holes to wash soil particles away from the inside. 5. To install the spray arm (C) back, insert the mounting element (B) in the spray arm and fix it in the delivery tube (A) by turning it clockwise. Make sure that the mounting element locks into place. 6. Install the cutlery drawer on the sliding rails and insert the stoppers. 11. TROUBLESHOOTING WARNING! Improper repair of the appliance may pose a danger to the safety of the user. Any repairs must be performed by qualified personnel. to contact an Authorised Service Centre. Refer to the below table for information on possible problems. With some problems, the display shows an alarm code. The majority of problems that may occur can be solved without the need Problem and alarm code Possible cause and solution You cannot activate the appliance. • • Make sure that the mains plug is connected to the mains socket. Make sure that there is no damaged fuse in the fuse box. ENGLISH Problem and alarm code Possible cause and solution The programme does not start. • • • The appliance does not fill with water. The display shows i10 or i11. • • • • • The appliance does not drain the water. The display shows i20. • • • 23 Make sure that the appliance door is closed. If the delay start is set, cancel the setting or wait for the end of the countdown. The appliance recharges the resin inside the water softener. The duration of the procedure is approxi‐ mately 5 minutes. Make sure that the water tap is open. Make sure that the pressure of the water supply is not too low. For this information, contact your local water authority. Make sure that the water tap is not clogged. Make sure that the filter in the inlet hose is not clog‐ ged. Make sure that the inlet hose has no kinks or bends. Make sure that the sink spigot is not clogged. Make sure that the interior filter system is not clog‐ ged. Make sure that the drain hose has no kinks or bends. The anti-flood device is on. • The display shows i30. • • Close the water tap. Make sure that the appliance is correctly installed. Make sure the baskets are loaded as instructed in the user manual. The appliance stops and starts more times during operation. • It is normal. It provides optimal cleaning results and energy savings. The programme lasts too long. • If the delay start option is set, cancel the delay set‐ ting or wait for the end of the countdown. Activating options increases the programme dura‐ tion. The displayed programme duration is different than the duration in the con‐ sumption values table. • Refer to the consumption values table in the chapter "Programme selection". The remaining time in the display increases and skips nearly to the end of the programme duration. • This is not a defect. The appliance is working cor‐ rectly. Small leak from the appli‐ ance door. • The appliance is not levelled. Loosen or tighten the adjustable feet (if applicable). The appliance door is not centred on the tub. Adjust the rear foot (if applicable). The appliance door is diffi‐ cult to close. • • • • The appliance is not levelled. Loosen or tighten the adjustable feet (if applicable). Parts of the tableware are protruding from the bas‐ kets. 24 www.electrolux.com Problem and alarm code Possible cause and solution The appliance door opens during the wash cycle. • The AirDry (空气对流干燥) function is activated. You can deactivate the function. Refer to "Basic set‐ tings". Rattling or knocking sounds from the inside of the appliance. • The tableware is not properly arranged in the bas‐ kets. Refer to basket loading leaflet. Make sure that the spray arms can rotate freely. • The appliance trips the cir‐ • cuit-beaker. The amperage is insufficient to supply simultaneous‐ ly all the appliances in use. Check the socket amper‐ age and the capacity of the meter or turn off one of the appliances in use. Internal electrical fault of the appliance. Contact an Authorised Service Centre. • Once you have checked the appliance, deactivate and activate the appliance. If the problem occurs again, contact an Authorised Service Centre. For alarm codes not described in the table, contact an Authorised Service Centre. WARNING! We do not recommend using the appliance until the problem has been completely fixed. Unplug the appliance and do not plug it in again until you are certain that it operates correctly. The PNC can be found on the rating plate on the appliance door. You can also check the PNC on the control panel. Before checking the PNC, make sure the appliance is in the programme selection. 1. Press and hold simultaneously and for about 3 seconds. The display shows the PNC of your appliance. 2. To exit the PNC presentation, press and hold simultaneously and for about 3 seconds. The appliance returns to the programme selection. 11.1 The product number code (PNC) If you contact an Authorised Service Centre, you need to provide the product number code of your appliance. 11.2 The washing and drying results are not satisfactory Problem Possible cause and solution Poor washing results. • • • • Refer to "Daily use", "Hints and tips" and the basket loading leaflet. Use more intensive washing programme. Activate the 加强漂洗 option to improve the wash‐ ing results of a selected programme. Clean spray arm jets and filter. Refer to "Care and Cleaning". ENGLISH Problem Possible cause and solution Poor drying results. • • • • • • 25 Tableware was left for too long inside the closed appliance. Activate AirDry (空气对流干燥) to set the automatic opening of the door and to improve the drying performance. There is no rinse aid or the dosage of rinse aid is not sufficient. Fill the rinse aid dispenser or set the level of rinse aid to a higher level. The quality of the rinse aid can be the cause. We recommend to use rinse aid always, even in combination with multi-tablets. Plastic items may need to be towel dried. The programme does not have the drying phase. Refer to "Programmes overview". There are whitish streaks or • bluish layers on glasses and dishes. • The released quantity of rinse aid is too high. Ad‐ just the rinse aid level to a lower level. The quantity of detergent is too high. There are stains and dry wa‐ • ter drops on glasses and dishes. • The released quantity of rinse aid is not sufficient. Adjust the rinse aid level to a higher level. The quality of the rinse aid can be the cause. The interior of the appliance is wet. • This is not a defect of the appliance. Humid air con‐ densates on the appliance walls. Unusual foam during wash‐ ing. • Use the detergent designed specifically for dish‐ washers. Use a detergent from a different manufacturer. Do not pre-rinse dishes under running water before putting them in the appliance. Traces of rust on cutlery. • • • • There are residues of deter‐ gent in the dispenser at the end of the programme. • • • Odours inside the appliance. • • There is too much salt in the water used for wash‐ ing. Refer to "The water softener". Silver and stainless steel cutlery were placed to‐ gether. Do not put silver and stainless steel items close together. The detergent tablet was stuck in the dispenser and therefore was not completely washed away by water. Water cannot wash away the detergent from the dispenser. Make sure that the spray arms are not blocked or clogged. Make sure that items in the baskets do not impede the lid of the detergent dispenser from opening. Refer to "Internal cleaning". Start the Machine Care (自清洁) programme with a descaler or a cleaning product designed for dishwashers. 26 www.electrolux.com Problem Possible cause and solution Limescale deposits on the • tableware, on the tub and on • the inside of the door. • • • • • • Dull, discoloured or chipped tableware. • • • • The level of salt is low, check the refill indicator. The cap of the salt container is loose. Your tap water is hard. Refer to "The water soft‐ ener". Use salt and set regeneration of the water softener even when multi-functional tablets are used. Refer to "The water softener". Start the Machine Care (自清洁) programme with a descaler designed for dishwashers. If limescale deposits still remain, clean the appli‐ ance with appliance cleaners which are particularly suitable for this purpose. Try a different detergent. Contact the detergent manufacturer. Make sure that only dishwasher-safe items are washed in the appliance. Load and unload the basket carefully. Refer to the basket loading leaflet. Place delicate items in the upper basket. Activate the 晶柔呵护 option to ensure special care for glassware and delicate items. Refer to "Before first use", "Daily use", or "Hints and tips" for other possible causes. 12. TECHNICAL INFORMATION Dimensions Width / height / depth (mm) 596 / 818 - 898 / 550 Electrical connection 1) Voltage (V) 220 - 240 Frequency (Hz) 50 bar (minimum and maximum) 0.5 - 8 MPa (minimum and maximum) 0.05 - 0.8 Water supply Cold water or hot water 2) max 60 °C Capacity Place settings 15 Power consumption Left-on mode (W) 5.0 Off-mode (W) 0.50 Water supply pressure 1) Refer to the rating plate for other values. 2) If the hot water comes from alternative source of energy (e.g. solar panels), use the hot water supply to decrease energy consumption. ENGLISH 27 13. ENVIRONMENTAL CONCERNS Recycle materials with the symbol . Put the packaging in relevant containers to recycle it. Help protect the environment and human health by recycling waste of electrical and electronic appliances. Do not dispose of appliances marked with the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office. X X X Softener & inner components Hydraulic circuit (including tanks)* Wiring harnesses * Hg Cd Cr6+ Hazardous substances PBBs PBDEs Note: 1. This table is compiled according to SJ/T11364-2014. means that this kind of hazardous substance content in all of the homogenous materials of this part is under the limitations 2. regulated in GB/T26572-2011. 3. X means that this kind of hazardous substance content in at least one homogenous material of this part exceeds the limitations regulated in GB/T26572-2011. 4. For these parts with X in the above table, there is no replacement solution due to technological limitations in the industry, however, this may change with technnological improvement. 5. If a part is marked with *, it means that it does not apply to all models, the actual parts depend on specific models. 6. Under normal usage conditions, the environment-friendly usage period is 15 years. Fittings: screws, brackets & plastic parts needed for installation as reported in the assembly instruction X X Control panel Baskets & sprayarms X Innerdoor (stainless steel inner door, sealing, bitumen, detergent dispenser, latch) Door X X Pb Sump & hydraulics (including pumps, heater & sensors) Tub Cabinet Parts Name EN 28 www.electrolux.com 117856122-A-152021 www.electrolux.com.cn
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement