Hobart 2912 Technical Manual

2912 SLICER

TECHNICAL MANUAL

SPECIFICATION SHEET

INSTALLATION INSTRUCTIONS

OPERATION INSTRUCTIONS

CLEANING INSTRUCTIONS

MAINTENANCE INSTRUCTIONS

TROUBLE SHOOTING INSTRUCTIONS

WIRING DIAGRAMS

CATALOG OF REPLACEMENT PARTS

SMARTPARTS™ USER GUIDE

RECOMMENDED SPARE PARTS LIST

Need other Hobart Services?

•

Warranty Registration

•

Delivery and Installation

•

•

Preventive Maintenance

•

Hobart Service Contracts

Extended Warranty Contracts

•

Parts and Accessories

•

Specialty Programs

•

Water Treatment Programs

2912 Slicer Technical Manual Page 2 of 72

Item # _____________________________________

Quantity ___________________________________

C.S.I. Section 11400

2912

SLICER

701 S Ridge Avenue, Troy, OH 45374

1-888-4HOBART • www.hobartcorp.com

STANDARD FEATURES

■ MICROBAN ® Antimicrobial Product Protection

■ Variable Six-Speed Automatic Carriage with

Front Mounted Controls

■ Home Position Start

■ Close To Stop

■ Gauge Plate Interlock

■ Carriage System Interlock

■ No Volt Release

■ Exclusive Tilting, Removable Carriage System

■ CleanCut ™ Knife

■ Top Mounted Borazon Stone Sharpener

■ Hobart Poly V-Belt Drive System

■ Sanitary Anodized Aluminum Base

■ Double-Action Indexing Cam

■ Permanently Mounted Ring Guard

■ Heavy Gauge Stainless Steel Knife Cover

■ Lift Lever

■ Removable Rear Deflector

■ 1 ⁄

2

H.P. Knife Drive Motor

■ Nylon Carriage Roller

■ Electroless Nickel Plated Single Slide Rod with

Reservoir Wick

■ Stainless Steel Carriage

■ Ergonomic Style Handle

■ Low Fence

OPTIONS

❑ Auto Shut Off (120/60/1 only)

MODEL

❑ 2912 – Smart Feature Automatic Slicer

ACCESSORIES

❑ Low Fence

❑ High Fence

❑ Food Chute

❑ Heavy Meat Grip

❑ Tall Legs

❑ Product Tray

Specifications, Details and Dimensions on Inside and Back.

R

F-39688 – 2912 Slicer


Page 1 of 4

2912

SLICER



SOLUTIONS / BENEFITS

MICROBAN ® Antimicrobial Product Protection

Cleaner Between Cleanings

■ Inhibits the growth of bacteria, mold, mildew and fungi, keeping the slicer “cleaner between cleanings”

■ Built-in and designed to last the life of the product

■ Works continuously between cleanings to maintain a lower level of odor and stain causing microorganisms

Variable Six-Speed Automatic Carriage with Front

Mounted Controls

Improved yield, labor savings

■ Greater flexibility for all slicing needs

■ Six speed choices for 28, 33, 38, 42, 47, and 52 strokes per minute

Home Start Position

Maximizes yield

■ Carriage must be in “home position” before the slicer will start

Close To Stop

Convenience, labor savings, energy savings

■ Closing of gauge plate turns off the slicer

Gauge Plate Interlock

Supports use of proper cleaning procedures, easier to clean

■ Gauge plate must be closed to remove carriage for cleaning and cannot be opened when removed

Carriage System Interlock

■ Will not tilt away or remove if gauge plate indicator is not closed

No Volt Release

Protects against unintentional starting of slicer

■ Slicer must be restarted if power fails or slicer is unplugged

Exclusive Tilting, Removable Carriage System

Reduces labor, improves sanitation

■ Tilt design allows for ease of midday cleaning

■ Removable for complete cleaning and sanitation procedures

CleanCut ™ Knife

Reduced cost of ownership, improved yield

■ Thin edge design improves yield

■ Super alloy edge lasts longer

■ Fewer and shorter sharpenings required

Top Mounted Borazon Stone Sharpener

Ease of use, improved sanitation, reduced costs

■ Single action sharpens and hones in just five seconds

■ Removable and submersible for easy cleaning and sanitation

■ Lifetime guaranteed Borazon sharpening stones provide maximum performance with reduced maintenance costs

Poly V-Belt Drive System

Performance, durability, reduced maintenance

■ Patented design extends belt life while producing optimum slicing results

■ Quieter operating slicer

Page 2 of 4


Sanitary Anodized Aluminum Base

Improved sanitation, labor savings

■ One piece base protects against possible growth of bacteria

■ No cracks/crevices or bolt holes where product can lodge and bacteria may grow

■ Easy cleanup and durable finish

Double-Action Indexing Cam

Increases reliability, easier to use, increased yield

■ The first full revolution of the indexing knob provides precise control for shaving, chipping and thin slicing

■ The second revolution opens the gauge plate quickly for thicker slicing

■ Gauge plate holds position for consistent, precision slicing

Permanently Mounted Ring Guard

Protection

■ Protects knife during operation and cleaning

Heavy Gauge Stainless Steel Knife Cover

Durability, ease of use, sanitation

■ Twelve-gauge stainless steel maintains shape to ensure consistent fit

■ Spring loaded knob for quick removal and easy cleanup

■ One piece design for simplistic usage

Lift Lever

Improved sanitation, ease of use

■ Props machine for easy cleaning underneath slicer

Removable Rear Deflector

Improved sanitation, ease of use

■ Allows access for thorough cleaning

■ No tools required means easy removal during cleaning

1 ⁄

2

H.P. Knife Drive Motor

Durability, performance

■ Reserve power runs at 400 rpm for optimum results

Nylon Carriage Roller

Performance

■ Easy movement for manual operation

Electroless Nickel Plated Single Slide Rod with

Reservoir Wick

Performance, durability, lower maintenance

■ Smooth operation with continuous lubrication of carriage rod

■ Resistant to rust

Stainless Steel Carriage

Improved sanitation, durability

■ Maximum sanitation with minimum cleanup time

■ Corrosion resistant, impact resistant

Ergonomic Style Handle

Operator satisfaction

■ Comfortable manual operation

Meat Grip Options

Multiple choices for improved yield and consistency

■ Front meat grip standard

■ Heavy front meat grip available

F-39688 – 2912 Slicer



2912

SLICER

SPECIFICATIONS

MICROBAN ® ANTIMICROBIAL PRODUCT PROTECTION:

The Microban additive is built into the external plastic components to inhibit the growth of bacteria, mold, mildew and fungi, keeping the slcer “cleaner between cleanings.”

The additive is designed to last the life of the products in which it is incorporated and works continuously to maintain a lower level of odor and stain causing microorganisms.

VARIABLE SIX-SPEED AUTOMATIC CARRIAGE WITH

FRONT MOUNTED CONTROLS: Choice of six speeds -

28, 33, 38, 42, 47, 52 strokes per minute. Carriage can be disengaged from power drive whether slicer is in operation or not. Automatic engagement and speed selector controls located in front of machine. Speed can be changed with slicer motor on or off. Carriage driven by DC gear-reduction motor and 4 bar synchronous linkage.

HOME POSITION START: Home-start ensures carriage is in a convenient position before starting the slicer.

CLOSE TO STOP: After slicing, a quick turn of the index knob to the closed position turns off the slicer.

GAUGE PLATE INTERLOCK: Gauge plate interlock protects knife edge when indicator is at zero.

CARRIAGE SYSTEM INTERLOCK: Carriage will not tilt away or remove if gauge plate indicator is not closed.

NO VOLT RELEASE: In the event of power loss, slicer must be restarted before operation can continue.

TILTING REMOVABLE CARRIAGE SYSTEM: Positive angle carriage design enables operator to slice without manual feed. The stainless steel carriage system tilts back easily for midday cleaning and is removable for thorough cleaning and sanitation procedures. The carriage has

12 1 ⁄

2

" manual travel.

CLEANCUT ™ KNIFE: Another Hobart exclusive, the knife is constructed of 304L stainless steel and high performance super alloy. Knife is protected by a permanently mounted ring guard with integrated product deflector. The stainless steel knife cover provides easy access for cleaning. Gauge plate protects knife edge when indicator is closed. Knife cover is quickly removed with a quarter turn of the spring loaded locking knob.

TOP MOUNTED BORAZON STONE SHARPENER: One lever operation utilizing two Borazon stones to sharpen and hone in five seconds. Removable and top mounted. When sharpener is removed for cleaning, knife edge is shielded.

Borazon stones have lifetime guarantee.

HOBART POLY V-BELT DRIVE SYSTEM: Knife is driven by a Hobart Poly V belt and runs at 400 rpm for optimal performance.

SANITARY ANODIZED ALUMINUM BASE: One-piece base protects against possible growth of bacteria. All surfaces are durable and smooth, presenting no holes or crevices in which food can lodge.

Microban ® does not protect the user against food-borne bacteria. Always maintain good hygiene practices.

DOUBLE-ACTION INDEXING CAM: First revolution of index cam for precision slicing; second revolution for thicker slicing selection. Indexing cam holds true to setting during slicing operation.

PERMANENTLY MOUNTED RING GUARD: Permanently mounted ring guard with integrated product deflector protects knife.

HEAVY GAUGE STAINLESS STEEL KNIFE COVER: One piece design made of 12 gauge stainless steel, durable to maintain shape and ensure consistent fit. Spring loaded for quick removal and replacement.

LIFT LEVER: Lift lever facilitates raising slicer to tilted position for cleaning beneath the machine.

REMOVABLE REAR DEFLECTOR: No tools are required for removal of the deflector for thorough cleaning of the slicer.

KNIFE MOTOR: 1 ⁄

2

H.P., permanently lubricated ball bearings. Single phase capacitor-start, induction run.

ELECTROLESS NICKEL PLATED SINGLE SLIDE ROD

WITH RESERVOIR WICK: Transport slide rod is E-Nickel electroless plated. Slide rod bearings feature an oil reservoir/oil wick.

FINISH: Stainless steel carriage, gauge plate and knife cover. Anodized aluminum base.

ERGONOMIC STYLE HANDLE: Specially designed for ease of use during manual operation.

MEAT GRIP: Front mounted grip is high strength thermoplastic. Swings out of way when not in use.

ELECTRICAL SPECIFICATIONS: 120/60/1 – U L Listed.

Also available in 100/50/60/1 and 230/50/1 (3 amps) – not submitted for U L Listing.

SWITCH: Moisture protected toggle type, operated by a push-pull rod.

CORD & PLUG: 6-foot, three-wire power supply cord and plug. Plug not furnished on export models.

CAPACITY: The carriage will take food up to 12" in width or 7 1 ⁄

2

" in diameter.

GAUGE PLATE: Gauge plate is a heavy aluminum casting with ribbed laminated stainless steel face for smooth feeding. Adjustable to cut any thickness of slice up to 1".

WARRANTY: All parts and service coverage for one year including knife. Lifetime guarantee on Borazon stones in the sharpening system.

WEIGHTS FOR THE FOLLOWING ITEMS: Tubular Chute

9.1 lbs.; Swing Arm .61 lbs.; Heavy Front Meat Grip 2.76 lbs.; Heavy Handle 2.7 lbs.; Standard Meat Grip 2.34 lbs.

WEIGHT: Shipping 182 lbs., Net 140 lbs.

F-39688 – 2912 Slicer Page 3 of 4


2912

SLICER

DETAILS AND DIMENSIONS



LEGEND

E1-ELECTRICAL CONNECTION,

APPROX 6 1 ⁄

2

" ABOVE

COUNTER TOP

Microban and the Microban symbol are registered trademarks of the Microban Products Company, Huntersville, NC.

Page 4 of 4

F-39688 (REV. 8/05)

As continued product improvement is a policy of Hobart, specifications are subject to change without notice.


F-39688 – 2912 Slicer

LITHO IN U.S.A. (H-01) Printed On Recycled Paper

I

N

S

T

R

U

C

T

I

2812 SLICER

O

N

S

MODEL 2812 & 2912 SLICERS

MODELS

2812 ML-104958

2912 ML-104963

Previous models covered by this manual:

2812 ML-104615

ML-104827

2912 ML-104713

ML-104823

ML-104874

701 S. RIDGE AVENUE

TROY, OHIO 45374-0001

937 332-3000 www.hobartcorp.com


FORM 34454 (Feb. 2000)

Installation, Operation, and Care of

MODEL 2812 & 2912 SLICERS

SAVE THESE INSTRUCTIONS

GENERAL

The model 2812 and 2912 slicers are equipped with a 1 ⁄

2

HP motor and are available for single-phase electrical service. The slicer features the exclusive Hobart Stay-Sharp contoured cast solid stainless steel knife. The slicer is furnished with a cord and plug as standard equipment. Other features and options include:

The Power Interrupt feature, standard, requires the slicer to be manually re-started after a power interruption.

The Gauge Plate and Carriage Interlock feature, standard, prevents the Carriage Tray from being removed unless the Carriage is in the H OME position (pulled all the way to the front) and the Gauge

Plate is C LOSED . When the Carriage Tray is tilted horizontally, the slicer will turn O FF if it has not previously been turned O FF . Once the Carriage Tray is tilted horizontally or removed, the slicer cannot be started and the Gauge Plate cannot be opened until the Carriage Tray is returned to its normal operating position.

The HomeStart feature, standard, requires the carriage to be in the H OME position before the slicer can be started.

If equipped with the AutoShutoff option, the slicer will turn off if a full stroke of the carriage has not been made within a 10 second interval. The AutoShutoff option is factory installed only.

The 2912 slicer features automatic slicing with six adjustable speeds.

A tubular food chute, 4" leg set and slaw tray are other available accessories for 2812 and 2912. The low carriage fence is an accessory on 2812; it is standard on 2912. A high carriage fence is an accessory used with front mounted meat grips. The standard meat grip is front-mounted. Heavy frontmounted meat grip is an available accessory.

Model 2812 Slicer Model 2912 Slicer

© HOBART CORPORATION, 1998

– 2 –


INSTALLATION

UNPACKING

Immediately after unpacking the slicer, check for possible shipping damage. If the slicer is found to be damaged, save the packaging material and contact the carrier within 15 days of delivery.

Prior to installing the slicer, test the electrical service to assure it agrees with the specifications on the machine data plate. The data plate is located on the right side of the slicer base.

CARRIAGE TRAY

The Carriage Tray is secured to the slicer when the knob on the Carriage Tray / Support Arm is turned clockwise until snug (Fig. 1). Refer to page 7 for assembly information.

SHARPENER

The Sharpener should already be mounted on top of the slicer and locked to its bracket (Fig. 1).

TOP KNIFE COVER

The Top Knife Cover should already be in place and secured with its Latch Knob (Fig. 1).

DEFLECTOR

The Deflector should already be mounted below the knife (Fig. 1).

FENCE (Low and High Fences are used with front-mounted meat grip only.)

Either Fence (Fig. 1) can be clamped on the Carriage Tray to limit product movement during slicing.

TOP KNIFE COVER

CARRIAGE TRAY

Model 2812

FENCE

SHARPENER

1. Back out Thumb Screw.

Lay Fence on Carriage Tray.

DEFLECTOR

2. Rotate to Vertical.

CARRIAGE TRAY /

SUPPORT ARM

3.

Slide Fence Up. Tighten Screw.

PL-41408-1

Fig. 1

ELECTRICAL

WARNING : THIS MACHINE IS PROVIDED WITH A THREE-PRONG GROUNDING PLUG. THE

OUTLET TO WHICH THIS PLUG IS CONNECTED MUST BE PROPERLY GROUNDED. IF THE

RECEPTACLE IS NOT THE PROPER GROUNDING TYPE, CONTACT AN ELECTRICIAN.

CLEAN BEFORE USING

The 2812 or 2912 slicer must be thoroughly cleaned and sanitized after installation and before being used. Refer to Cleaning, page 6.

– 3 –


OPERATION

SAFETY

SAFETY DEVICES INCORPORATED IN THIS SLICER MUST BE IN THEIR CORRECT OPERATING

POSITIONS ANYTIME THE SLICER IS IN USE.

The T

OP

K

NIFE

C

OVER

must be in position and secured with the L

ATCH

K

NOB

(Fig. 2). The R

ING

G

UARD

is not removable. The D

EFLECTOR

, mounted below the slicer knife, can be removed for cleaning.

The M

EAT

G

RIP

(Fig. 2) must be used when slicing short ends to keep your hand(s) away from the knife.

When the slicer is not running, the I

NDEX

K

NOB

(Fig. 2) must be turned back below zero (fully clockwise).

The G

AUGE

P

LATE

will then cover the knife edge.

Always UNPLUG the P

OWER

C

ORD

before cleaning or moving the Slicer.

Model 2812

CARRIAGE TRAY

TOP KNIFE COVER

RETAINING CLIP

FENCE

LATCH KNOB

GAUGE PLATE

MEAT GRIP

CARRIAGE TRAY HANDLES

INDEX KNOB

SWITCH KNOB

PL-41409-1

Fig. 2

WARNING : ROTATING KNIFE. USE FEED GRIP. UNPLUG MACHINE POWER CORD BEFORE

CLEANING, SERVICING, OR REMOVING PARTS. REPLACE PARTS BEFORE USE.

SLICING — MODEL 2812

With the Gauge Plate fully closed, pull the Carriage all the way toward you until it reaches its stop. With the Meat Grip out of the way, place the product to be sliced on the Carriage Tray. Set the Meat Grip against the product.

If the Meat Grip is not needed, it may be stored out of the way by rotating it behind the top of the Carriage

Tray where it can rest on the Retaining Clip (Fig. 2).

Adjust the Gauge Plate to obtain the desired slice thickness by turning the Index Knob (Fig. 2). The numbers on the Index Knob do not indicate actual measurements but may be used for reference to duplicate slice thickness. Turn the slicer on by pulling the Switch Knob (Fig. 2) forward until it starts and then releasing it. Slicer will not stay on unless the gauge plate is opened first. Unless the Gauge

Plate is opened before pulling the Switch Knob on, the slicer will not continue to run when the Switch

Knob is released.

Use either Carriage Tray Handle (Fig. 2) to push the Carriage back and forth to slice.

Turn the slicer off by pushing the Switch Knob or by closing the Gauge Plate.

– 4 –


SLICING — MODEL 2912

With the Gauge Plate fully closed, pull the Carriage all the way toward you until it reaches its stop. With the Meat Grip out of the way, place the product to be sliced on the Carriage Tray. Adjust the fence by loosening the thumb screw and sliding the fence so that it is close to the product but not pushing against it. Tighten the thumb screw. Set the Meat Grip against the product. Always make sure the Lever

(Fig. 3) is in the Manual position (down) before starting the slicer.

If the Meat Grip is not needed, it may be stored out of the way by sliding it to the top of its travel, rotating it under the Carriage Tray, and allowing it to rest in the Retaining Clip (Fig. 3).

Adjust the Gauge Plate by turning the Index Knob (Fig. 3) to obtain the desired slice thickness. The numbers on the Index Knob do not indicate actual measurements but may be used for reference to duplicate slice thickness. Turn the slicer on by pulling the Switch Knob (Fig. 3) forward until it starts and then releasing it. Unless the Gauge Plate is opened before pulling the Switch Knob on, the slicer will not continue to run when the Switch Knob is released.

Use either Carriage Tray Handle (Fig. 3) to push the Carriage back and forth to slice manually.

Turn the slicer off by pushing the Switch Knob or by closing the Gauge Plate.

To operate the slicer in Automatic mode . . . Rotate the Speed Selector Knob (Fig. 3) to the desired speed; make sure the Carriage is in H

OME

position (all the way forward); make sure the Lever (Fig. 3) is on the Manual position (pointing down); turn the slicer on; start the carriage drive unit by rotating the

Lever to the Automatic position (up and to the right).

Any of the six speed selections can be used to begin Automatic mode. The speed can be adjusted at any time by rotating the Speed Selector Knob.

To stop the drive unit, rotate the Lever down and to the left — to the Manual position.

To use the optional Food Chute, place the Meat Grip on the Retaining Clip, fit the hangers on the Food

Chute around the meat grip slide rod (at front), and lower the Food Chute onto the Carriage Tray.

Model 2912

LATCH KNOB

CARRIAGE TRAY

TOP KNIFE

COVER

RETAINING CLIP

SHARPENER

GAUGE PLATE

MEAT GRIP

SWITCH KNOB

CARRIAGE HANDLES

INDEX KNOB

SPEED SELECTOR KNOB

LEVER IN MANUAL (DOWN) POSITION

Fig. 3

– 5 –


PL-41257-1

CLEANING

This machine must be thoroughly cleaned and sanitized after each day’s operation or after being idle for an extended period of time.

TOP KNIFE COVER

WARNING : THE SLICER KNIFE IS VERY SHARP.

EXERCISE EXTREME CAUTION WHEN WORKING

NEAR THE KNIFE.

LATCH KNOB

CARRIAGE TRAY

WARNING : UNPLUG MACHINE POWER CORD

AND TURN THE INDEX KNOB FULLY CLOCKWISE

BEFORE CLEANING THE SLICER.

Use a clean cloth soaked in mild detergent and warm water to wipe all surfaces of the machine. Rinse using a fresh cloth and clean water. Use only products formulated to be safe on stainless steel or aluminum.

KNOB

Fig. 4

CARRIAGE TRAY /

SUPPORT ARM

PL-41258-1

To clean the Carriage Tray, close the gauge plate and pull the Carriage all the way to the front. Unscrew the Knob on the Carriage Tray / Support Arm (Fig. 4). Tilt the Carriage Tray / Support Arm to the right until almost horizontal (Fig. 4). The Carriage Tray / Support Arm can be cleaned while in this horizontal position, or it can be removed by grasping with both hands and lifting straight up. Once removed, the

Carriage Tray / Support Arm can be cleaned in a sink. NOTE : The last three digits of the slicer serial number are etched on the Key (Fig. 8) so you can make sure the Carriage Tray stays with its own slicer.

Remove the Top Knife Cover by rotating the Latch Knob (Fig. 4) counterclockwise and lifting it free of the guide pins. Remove the Deflector (Fig. 1) from its mount below the slicer knife by rotating downward. Clean both Top Knife Cover and Deflector with warm soapy water in a sink. Rinse with clean water.

SHARPENER

RING GUARD

KNIFE

KNIFE

GAUGE PLATE

PAPER TOWEL

GAUGE PLATE

PL-41403-1

LOCK LEVER

PL-41402-1

Fig. 5 Fig. 6

Remove the sharpener by pushing the Lock Lever to the left (Fig. 5). Tilt the right side up, clearing the right guide pin, then lift the sharpener up, clearing the left guide pin. Wipe out any residue remaining inside the sharpener housing and clean the sharpener in a sink. Rinse with fresh water.

Clean completely around the Ring Guard by working a moistened, folded paper towel between the Ring

Guard and Knife. Insert the towel at the base of the Ring Guard. Manually rotate the knife and the towel will wipe the Ring Guard and the edge of the Gauge Plate as it follows the knife (Fig. 6).

Wash and rinse both sides of the knife by wiping outward from the center. Use a mild detergent or sanitizer solution only. Never clean any part of the slicer with steel pads.

Do not exceed chemical manufacturer’s recommended concentrations for detergent or sanitizer. Do

– 6 –


not exceed 200 parts per million concentration of available chlorine. For example, mixing 1 tablespoon of

5.25% sodium hypochlorite bleach with 1 gallon of water yields a solution containing 200 ppm of available chlorine. Solution with concentrations greater than 200 ppm will accelerate corrosion of metals. Maximum exposure to sanitation solution varies with temperature and concentration. Rinse with clean water.

Reassemble the sharpener to the mounting bracket by sliding the left slot on the sharpener over the left guide pin on the bracket while tilting slightly (Fig. 7). Then, press down on the right side of the sharpener so the locking hole fits over the right guide pin on the bracket.

Slide the Lock Lever to the right to lock the sharpener in position. Make sure the sharpener is securely engaged to the pins on the bracket.

Carefully reassemble the Top Knife Cover by putting it in position (three guide pins). Lock by turning the Latch

Knob to the left while lowering the Top Knife Cover; then, release the Latch Knob and turn it to the right until snug.

Replace the Deflector below the slicer knife: Guide bottom of socket onto mount and rotate upwards.

Make sure the digits etched on the Key (Fig. 8) match the last three digits of the slicer serial number. To reinstall the Carriage Tray / Support Arm: Hold it with both hands and lower it so the Key at the bottom of the

Support Arm fits into the slot of the Carriage Pivot

(Fig. 8). The Carriage Tray should rest almost horizontal

(Fig. 4). Return the Carriage Tray to the Gauge Plate by tilting to the left. Turn the Knob on the Carriage Tray /

Support Arm clockwise until snug.

The model 2812 slicer has a Cleaning Leg underneath the machine. To engage the Cleaning Leg, raise the front of the slicer by lifting the front of the slicer base.

The Cleaning Leg will swing straight down. Pull the

Cleaning Leg all the way to the front so the slicer is completely supported before cleaning underneath

(Fig. 9).

LOCK LEVER

SHARPENER

Fig. 7

CARRIAGE TRAY /

SUPPORT ARM

CLEANING LEG

MODEL 2912 –

RAISED FOR CLEANING

KEY

Fig. 8

Fig. 9

KNIFE

GAUGE PLATE

PL-41402-1

CARRIAGE PIVOT

PL-41248-1

PL-40866-1

LIFT LEVER –

RAISED PAST CENTER

To clean under the model 2912 slicer, raise the Lift

Lever past center to its stop (Fig. 10). After cleaning, return the slicer to its normal position by slowly retracting the Lift Lever.

DO NOT wash any slicer components in a dishwasher.

DO NOT immerse slicer base or motor in water.

Fig. 10

PL-41259-1

If using a chlorinated sanitizing solution, dilute per manufacturer’s guidelines. Rinse with fresh water.

NOTE : Failure to follow use, care, and maintenance instructions may void your Hobart warranty.

– 7 –


MAINTENANCE

KNIFE SHARPENING

The Hobart cast stainless steel knife will provide long service in normal food retail or commercial kitchen use. However, in high volume applications where it is a practice to sharpen the knife frequently or even daily, the knife will be expended in a shorter time.

Sharpen only when necessary; prolonged or too frequent sharpening results in unnecessary knife wear .

WARNING : UNPLUG MACHINE POWER CORD.

Turn the index knob fully clockwise to close the gauge plate. Remove the Top Knife Cover by rotating the Latch Knob counterclockwise and lifting it off the slicer. Thoroughly wash the area around the knife, the exposed knife surfaces, and the knife edge. Fat from meat or cheese should not be allowed to transfer from the knife to the sharpener.

Plug in machine power cord. With the carriage tray pulled fully forward, start the slicer with your right hand by pulling the start switch forward and holding it out. If the sharpener handle is the type that does not hang downwards, pull it fully forward for 5 seconds

(Fig. 11). If the sharpener handle does hang downwards, lift it with your left hand until horizontal and pull forward for 5 seconds (Fig. 11). Slowly release the sharpener handle. Release the switch knob to turn the slicer off. If necessary, repeat sharpening for another 5 seconds.

Unplug machine power cord. Wipe the slicer with a clean damp cloth to remove any grinding particles.

Replace the Top Knife Cover.

TO SHARPEN:

PULL SHARPENER HANDLE

FULLY FORWARD

FOR 5 SECONDS

TOP KNIFE COVER

IS REMOVED

Fig. 11

PL-41404-1

LUBRICATION — Carriage Slide Rod

Lubricate the Carriage Slide Rod with Lubriplate

FMO-200-AW oil (supplied). Either squirt 8 – 10 drops every 2 – 3 months (depending on usage) in the Wick Hole on the Carriage Transport (Fig.12).

Or, once monthly, apply 4 – 5 drops directly on the

Carriage Slide Rod on each side of the Carriage

Transport (Fig.12).

To apply oil, pull out the telescoping tube on the oil bottle, aim the tube, and squeeze gently on the sides of the bottle. After applying oil, move the

Carriage Tray back and forth a few times so the oil spreads over the entire length of the slide rod.

OVERLOAD RESET BUTTON — MODEL 2912

CARRIAGE SLIDE ROD

WICK HOLE

CARRIAGE TRANSPORT

Fig. 12

PL-41146-1

Push the reset button underneath the slicer near the right-front foot if the carriage motor overloads.

SERVICE

Contact your local Hobart-authorized service office for any repairs or adjustments needed on this equipment.

FORM 34454 (Feb. 2000)

– 8 –


PRINTED IN U.S.A.

TROUBLESHOOTING

2912 SLICER

POSSIBLE CAUSE SYMPTOM

Slicer won't start.

Slicer will not stay running.

Hard to slice.

1. Carriage not in home position.

2. Home switch malfunction.

3. Wall outlet circuit or ground fault circuit open.

4. Slicer unplugged.

5. Start switch malfunction.

6. Power cord malfunction.

1. Carriage tray not installed.

2. Gauge plate switch malfunction.

3. Index not open.

1. Knife dull.

2. Carriage slide rod not properly lubricated.

3. Transport bushings worn.

1. Top knife cover not installed properly. Product going under top knife cover.

Carriage cannot be removed.

No automatic operation

(knife turns).

1. Carriage not in home position.

2. Index not fully closed.

3. Interlock malfunction.

1. Reset circuit breaker.

2. Auto / Man switch malfunction.

3. Slicer not in automatic mode.

4. Clean auto speed position sensor vane.

5. Auto speed sensor malfunction.

Poor slice quality. 1. Knife dull

2. Sharpener stones worn.

3. Knife is too small.

4. Meat grip arm binding.

5. Fence missing.

6. Top cover missing.

7. Top cover misadjusted.

8. Wrong carriage tray on slicer (verify last 3 digits match)

9. Sharpener mounting pins loose.

NOTE:

If symptom(s) persists after possible causes have been checked, contact your local Hobart Service Office.


ELECTRICAL AND GROUNDING CONNECTIONS MUST

COMPLY WITH THE NATIONAL ELECTRICAL CODE

AND/OR OTHER APPLICABLE LOCAL CODES.

1S STOP

SWITCH

1S-NC

2S START

SWITCH

1S-C

2S-NO 2S-C

1 0

2CR 1J-5

1P-5

1J-3

6

2CR

8

1P-3

1S-4

1S-1

1S-2

1S-4 1S-2

BLK

GRN

WHT

1S-3

GND

1P-1

0

1S-3

1J-1

1

CR

6

1

NC

NO C

ENGAGE

2S

1CR

8

1J-2

1P-2

2LS

HOME

1J-9

1P-9

1J-7

2 1CR 4

1P-7 3LS 1PL

W

1P-8

1LS

INTERLOCK

C NC

1J-6

1P-6

1J-8

1TDR

TIME DELAY

RELAY

1 2

6

3

1J-4

1P-4

2

2CR

4

1

1CB

2

J1 J7

MOTOR

CONTROL

J2

J3 J4

J6

WHITE

2MTR

BLACK

SPEED

ADJUST

BOARD

J1

J2

WHITE

WHITE

1

2

ELECTRONIC

START

SWITCH

3

T2 OR WHITE

T4 OR YELLOW

1MTR

MOTOR

BLACK

4

BLACK

T8 OR RED

START

T3 OR ORANGE

T1 OR BLUE

DERIVD FROM F 35245

ELECTRICAL DIAGRAM

100/120V 50/60Hz

2912 SLICER W/HOME START AND

AUTO-SHUTOFF AI3173


WHITE

BLACK

START

SWITCH

2S

C NO NC

1 PL

PILOT LIGHT

STOP

SWITCH

1S

C NO NC

SPLICE

SPLICE

SPLICE

J1

SPLICE

SPLICE

2M

CARRIAGE

MOTOR

1 R

SPD

CNTL

J2

SPLICE

C

2S NC

MAN./AUTO.

NO

BLACK

WHITE

2LS

HOME

1CB

2 1

C

NC

1LS

INTERLOCK

3LS

RESET

1 2 3 4 5 6 7 8 9

1 2 3 4 5 6 7 8 9

2

6

4

8

1CR

0

1

T2 OR WHT

T4 OR YEL

1

2

ELECTRONIC

START

SWITCH

3

BLK

4

BLK

T8 OR RED

T3 OR ORANGE

T1 OR BLUE

START

1MTR

MOTOR

CAP

POWER CORD

SPLICE

SPLICE

BLACK

WHITE

SPLICE

SPLICE

GND

1P

1J

6

1TDR

TIME DELAY

RELAY

1 2 3

J2 J1

NEU HOT

J3 J4

J6

MOTOR CONTROL

BOARD

J7

2

6

4

8

2CR

0

1

DERIVED FROM 914881B

2912 SLICER CONNECTION DIAGRAM

100/120V 20/60 HZ


AI 3174

CATALOG OF

REPLACEMENT

PARTS

MODEL 2000 SERIES

SLICER

2612 ML-134231

2612C ML-134233

2612GC ML-136100

2612PHS ML-134234

2712 ML-134235

2712C ML-134237

2712PHS ML-134238

2812 ML-104616

2812 ML-104617

2812 ML-136164

2812 ML-136167

2812 ML-136168

2812PS ML-136169

2912 ML-104996

2912 ML-136189

2912 ML-136153

2912 ML-136154

2912B ML-136251

2912C ML-136174

2912PS ML-136175

PRIOR MLS COVERED IN THIS MANUAL

2812 ML-134239

2812 ML-136110

2812 ML-136112

2812PS ML-134241

2812PS ML-136114

2812ALB ML-134243

2812C ML-134244

2812CB ML-136141

2912 ML-134245

2912 ML-136111

2912 ML-136113

2912 ML-136188

2912PS ML-134247

2912C ML-134248

A p r o d u c t o f H O B A R T 7 0 1 S . R I D G E A V E N U E T R O Y , O H I O 4 5 3 7 4 - 0 0 0 1

FORM 43081 Rev. D (September 2010)


MODEL 2000 SERIES SLICER REPLACEMENT PARTS

F-43081 Rev. D (September 2010) - 2 -


© HOBART 2010


Table of Contents

5

6

7

9

Knife Drive Motor Unit

Knife Shaft Unit

Top Cover And Lock Knob Unit

Scale Assembly (2812PS & 2912PS Series)

(2812PS, ML-134241, ML-136114, ML-136167, & ML-136169)

15 Gauge Plate And Index Unit

17 Knife Sharpener Unit

19 Electrical Unit (2612 & 2712 Series)

21 Electrical Unit (2812 & 2912 Previous Construction)

23 Electrical Unit (2812 & 2912 Current Construction)

25 Base Unit (2612 & 2812 Series)

27 Base UnIt (2712 & 2912 Series)

29 Automatic Base Unit

31 Transport Carriage Unit (2612 & 2712 Series)

33 Transport Carriage Unit (2812 & 2912 Series)

35 Automatic Carrier Unit

(2712 SERIES, 2912, ML-134245, ML-134248, ML-136111, & ML-136113)

37 Electrical Cover Assembly( 2912B, ML-134251)

38 Electrical Cover Assembly (2912PS, ML-134247 & ML-136175)

39 Wiring Harness (2712 Series)

40 Wiring Harness (2812 & 2812PS SERIES)

41 Wiring Harness (2912, ML-136111 & ML-136113 & 2912B, ML-134251)

(2912, ML-134245, ML-136111, ML-136113, & 2912C, ML-134248)

43 Wiring Harness (2912PS, ML-134247)

2612

2612C

2612GC

2612PHS

2712

2712C

2712PHS

ML-134231

ML-134233

ML-136100

ML-134234

ML-134235

ML-134237

ML-134238

2812

2812

2812

2812

2812

2812

2812

2812

2812ALB

2812CB

ML-134239

ML-136110

ML-136112

ML-136164

ML-136167

ML-136168

ML-104616

ML-104617

ML-134243

ML-136141

2812PS

2812PS

2812PS

2812C

2912

2912

2912

2912

ML-134241

ML-136114

ML-136169

ML-134244

ML-134245

ML-136111

ML-136113

ML-136153

2912

2912

2912

2912

2912PS

2912PS

2912C

2912C

2912B

ML-136154

ML-136188

ML-136189

ML-104996

ML-134247

ML-136175

ML-134248

ML-136174

ML-134251

- 3 -


F-43081 Rev. D (September 2010)


10-11

3-4-5

1

2

6

7

8

13

9

14

16-17-18

15

12

PL-57691

KNIFE DRIVE MOTOR UNIT

F-43081 Rev. D (September 2010) - 4 -



KNIFE DRIVE MOTOR UNIT

NAME OF PART ILLUS.

PL-57691

PART NO. AMT.

1

2

SC-123-65 Set Screw Special 1 /

4

-28 x 3 /

8

Hdls., Flat Pt. .............................................................................. 2

00-438844-00002 Sheave – Poly “V” ...................................................................................................................... 1

3 SC-037-73 Cap 3 /

8

-16 x 1 Hex Hd. .................................................................................................... 2

4 WL-007-25 /

8

External ............................................................................................................. 2

5 WS-018-22 Washer

6 SC-118-98 Cap 1 /

4

-20 x 2 Hex Hd. .................................................................................................... 1

7 00-477532 Bracket

8 00-477760 Plate – Motor ............................................................................................................................. 1

9

10

00-439032 Gasket – Motor .......................................................................................................................... 1

00-438846-00001 Motor (60 Hz.) (115/230 V.) ........................................................................................................ 1

11 00-438846-00002 Motor (50 Hz.) (115/230 V.) ........................................................................................................ 1

12 00-438984 Standoff...................................................................................................................................... 1

13 SC-041-01 Screw 3 /

4

Hex Hd. (SST) ........................................................................................ 1

14 NS-044-14

15 SD-038-18 Screw 3 /

4

Hex Washer Hd., Type RL........................................................ 3

16 SC-037-73

17 WL-007-25

18 WS-018-22

- 5 -




1 2

9 8

10

11

12-13

14-15

16

3

4

6

7

5

PL-57007

KNIFE SHAFT UNIT


PL-57007

PART NO. AMT.

1 NS-017-41 Jam /

8

-18 Hex..................................................................................................................... 1

2 WL-004-17 /

8

Light................................................................................................................... 1

3

4

00-438845

00-439049

Belt – Poly “V” ............................................................................................................................ 1

Sheave – Poly “V” Large 6 Groove ............................................................................................ 1

5 SC-037-73 Cap 3 /

8

-16 x 1 Hex Hd. .................................................................................................... 2

6 WL-007-25 /

8

External ............................................................................................................. 2

7 00-875180-00002 Retainer – Lower Hub & Bearing (Incls. Item 9) ........................................................................ 1

8

9

10

RR-009-07

BB-021-66

Ring – Retaining ........................................................................................................................ 1

Bearing – Ball ............................................................................................................................ 1

00-438915-00002 Shaft – Knife .............................................................................................................................. 1

11 BB-021-66

12 00-439870-00005

13

14

00-439870-00006 Knife (Packaged) (2912B) ......................................................................................................... 1

00-073356-00002 Screw – Knife (Incls. Items 15 & 16) .......................................................................................... 1

15 SC-064-04 Screw 3 /

8

Hdls., Flat Pt. Nylok ................................................................................. 1

16 00-073265 Plug – Plate Thrust .................................................................................................................... 1

F-43081 Rev. D (September 2010) - 6 -



5

6 7

1 THRU 4

8

9

10

16

15

13-14

17-18-19

12

11

PL-57698

TOP COVER AND LOCK KNOB UNIT


PL-57698

PART NO. AMT.

1

2

3

4

5

6

SC-130-53

SC-126-35

SC-122-53

WL-013-02

00-915167

00-437994

Mach. Screw 4-40 x 3 /

4

Tx. Button Hd. (Correctional) ................................................................ 1


8

Hex Hd. (2612PHS & 2712PHS) .......................................................... 1


8

Phil. Pan Hd. ......................................................................................... 1

Lockwasher #4 Internal Shakeproof .......................................................................................... 1

Knob – Locking Top Cover ......................................................................................................... 1

Spring – Top Cover .................................................................................................................... 1

7

8

9

PG-011-30

00-875265

PG-006-27

Pin – Grooved ( 3

Stud – Locking Top Cover .......................................................................................................... 1

Pin – Grooved ( 1 /

/

32

4

) (SST) .......................................................................................................... 1

) (SST) ........................................................................................................... 1

10 00-438920-00003 Guard Assy. – Knife Ring ........................................................................................................... 1

11 SD-038-14 Screw 7 /

8

Hex Washer Hd., Type RL ......................................................... 2

12

13

14

15

16

17

18

19

00-875341

00-875340

SD-038-19

00-875343

00-875355

Ferrule – Ring Guard ................................................................................................................. 2

Mount – De fl ector ...................................................................................................................... 1

Self-Tapping Screw 8-18 x 3 /

8

Hex Washer Hd. ......................................................................... 3

Knife Shaft Ring ......................................................................................................................... 1

De fl ector – Product .................................................................................................................... 1

00-873784 Cover – Top & Lock Knob Assy. (2612PHS & 2712PHS) (Incls. Items 2 & 4 thru 8) ................. 1

00-873830-00006 Cover – Top & Lock Knob Assy. (Incls. Items 3 thru 8) .............................................................. 1

00-873830-00007 Cover – Top & Lock Knob Assy. (Correctional) (Incls. Items 1 & 4 thru 8) ................................. 1

- 7 F-43081 Rev. D (September 2010)



1

9

8

7

3

4

5-6

2

10

2812PS

2812PS

2812PS

ML-134241

ML-136114

ML-136169

2912PS

2912PS

ML-134247

ML-136175

SCALE ASSEMBLY

(2812PS & 2912PS SERIES)

F-43081 Rev. D (September 2010) - 8 -


PL-57002


SCALE ASSEMBLY

(2812PS & 2912PS SERIES)


PL-57002

PART NO. AMT.

1 00-477517 Platter ............................................................................................................................... 1

2 00-477662 Platter – Support Assy. (Incls. Item 10) ...................................................................................... 1

3 00-439986 Pad – Rubber ............................................................................................................................. 2

4 00-873267 .................................................................................................................................... 1

5 SC-041-06 Cap 1 /

4

-20 x 1 1 /

4

Hex Hd. ................................................................................................. 2

6 WL-013-14 /

4

Internal Shakeproof ........................................................................................... 2

7 SC-093-04 Mach. Screw 8-32 x 1 /

2

Phil. Pan Hd. (SST) .............................................................................. 2

8

9

10

WL-013-08

00-477684

00-479093

00-477227

Lockwasher #8 Internal Shakeproof .......................................................................................... 2

Plate – Load Cell ....................................................................................................................... 1

Set Screw (Machined) ............................................................................................................... 2

Scale Assy. – P.C.B. ................................................................................................................... 1

- 9 -




2

1

3

4

7

6

8

PL-57006

DISPLAY TOWER ASSEMBLY

(2812PS, ML-134241, ML-136114, ML-136167, & ML-136169)

F-43081 Rev. D (September 2010) - 10 -


5


DISPLAY TOWER ASSEMBLY

(2812PS, ML-134241, ML-136114, ML-136167, & ML-136169)

PART NO. NAME OF PART ILLUS.

PL-57006

AMT.

1

2

3

4

00-875362

00-477803

00-477225

SC-124-76

Cap – Left Display End .............................................................................................................. 1

Filter – Display ........................................................................................................................... 1

Display – PCB Assy. .................................................................................................................. 1

Set Screw 6-32 x 1 /

2

Hdls., Cup Pt. ........................................................................................... 10

5

6

00-477568

00-875363

Arm – Flex ................................................................................................................................. 1

Cap – Right Display End ............................................................................................................ 1

7 00-477368 Housing

8 00-439058 Keypad – Slicer .......................................................................................................................... 1

- 11 -




1

46-47

48-49

50

2

3

4

12

5

11

10

9

8

7

6

51

ML-134243 ONLY

15

13

14

16

52

19 17-18

21

22-23

20

45

43-44

31-32-33 28-29-30 25-26-27

24

36

35

34

37-38-39

40-41-42

2612

2612C

2612GC

2612PHS

2712

2712C

2712PHS

ML-134231

ML-134233

ML-136100

ML-134234

ML-134235

ML-134237

ML-134238

2812

2812

2812

2812

2812

2812

2812

2812

2812ALB

2812CB

ML-134239

ML-136110

ML-136112

ML-136164

ML-136167

ML-136168

ML-104616

ML-104617

ML-134243

ML-136141

2812PS

2812PS

2812PS

2812C

2912

2912

2912

2912

CARRIAGE TRAY UNIT

ML-134241

ML-136114

ML-136169

ML-134244

ML-134245

ML-136111

ML-136113

ML-136153

PREVIOUS CONSTRUCTION

2912

2912

2912

2912

2912PS

2912PS

2912C

2912C

2912B

PL-57692

ML-136154

ML-136188

ML-136189

ML-104996

ML-134247

ML-136175

ML-134248

ML-136174

ML-134251

F-43081 Rev. D (September 2010) - 12 -



CARRIAGE TRAY UNIT


PL-57692

PART NO. AMT.

9

10

6

7

8

1

2

3

4

5

00-873604

00-875365

SC-124-41

Chute Assy. – Food (Incls. Items 2, 3, & 4) ................................................................................ 1

Hanger – Chute (All Except 2812ALB) ...................................................................................... 2

Mach. Screw Special 8-32 x 5 /

8

Phil. Oval Hd. (All Except 2812ALB) ........................................ 2

00-075945 Pusher Assy. – Plate .................................................................................................................. 1

00-437912-00002 Heavy Meat Assy. (2812ALB) (Incls. Items 6 thru 14) ............................................................... 1

SC-124-67

00-070345

00-070344

00-070202

00-437006


2

Slotted Truss Hd. (2812ALB) .............................................................. 1

Washer – Handle Retaining (2812ALB) ..................................................................................... 1

Washer – Handle Tension (2812ALB) ........................................................................................ 1

Handle – Meat Grip (Non-Metallic) (2812ALB) .......................................................................... 1

Washer – Handle (2812ALB) ..................................................................................................... 1

11 00-438280

12 00-437908

13 00-478254

14

15

Meat Grip Heavy Subassy. (2812ALB) ...................................................................................... 1

00-479544-00003 Feed Arm Assy. (Aluminum) (2812ALB) .................................................................................... 1

00-915121 Handle Assy. – Arby’s (Aluminum) ............................................................................................. 1

16

17

18

00-875320

00-479544

19 00-478254

20 00-875354

Handle – Feed Grip Assy. (All Except 2812ALB) ....................................................................... 1

Feed Arm Assy. (SST) (2912B) (Incls. Items 15, 19, 51, & 52) .................................................. 1

00-479544-00003 Feed Arm Assy. (Aluminum) (Incls. Items 16, 19, 51, & 52)....................................................... 1

Knob & Slide Rod Assy. ............................................................................................................. 1

21

22

23

00-915028

SC-123-09

SC-129-06

24 WS-030-58

25 00-875345

Hanger – Meat Grip (MicroBan) ................................................................................................. 1


8

Phil. Oval Hd. ........................................................................... 2


8

Tx. Flat Hd. (SST) (2612C, 2712C, 2812C, & 2912C) .......................... 2

Handle – Carriage ...................................................................................................................... 1

26 WS-022-02

27 SC-041-02

28 SC-126-27

29

30

SC-123-09

SC-129-06

31

32

33

34

35

SC-126-28

SC-123-10

SC-128-84

00-873480

00-875350

Mach. Screw 8-32 x 3


/

8

Hex Hd. (2612PHS & 2712PHS) .......................................................... 3


8

Phil. Oval Hd. ........................................................................... 3

8

Tx. Flat Hd. (SST) (2612C, 2712C, 2812C, & 2912C) .......................... 3

Mach. Screw 8-32 x 1 1 /

2

Hex Hd. (2612PHS & 2712PHS) ........................................................ 2

Mach. Screw Special 8-32 x 1 1 /

2

Phil. Oval Hd. ......................................................................... 2


2

Hex Flat Hd. (SST) (2612C, 2712C, 2812C, & 2912C) ...................... 2

Box – Slaw ................................................................................................................................. 1

Cap – Meat Grip Hanger ............................................................................................................ 1

36

37

38

39

40

00-875357

SC-126-27

SC-123-09

SC-124-77

00-875345

Hanger – Meat Grip ................................................................................................................... 1


8

Hex Hd. (2612PHS & 2712PHS) .......................................................... 3



8

8

Phil. Oval Hd. ........................................................................... 3

Hex Flat Hd. (Correctional) ...................................................... 3

Handle – Carriage ...................................................................................................................... 1

41 WS-022-02

42 SC-041-02

43 00-914983 Gasket – Slide Rod Base (No Ribs) .......................................................................................... 1

44 00-914983-00002 Gasket – Slide Rod Base (Ribbed) ............................................................................................ 1

45 00-875646-00002

46

47

48

49

50

51

52

00-915122 Support Handle & Slide Rod (2912B) ........................................................................................ 1

00-875360-00002 Support (All Except 2912B) ....................................................................................................... 1

00-295118 Low Fence Assy. (Packaged) (SST) .......................................................................................... 1

00-295117

00-290984

00-913067

00-479463

High Fence Assy. (SST) (All Except 2812ALB).......................................................................... 1

Thumb Screw – Fence (All Except 2812ALB) ........................................................................... 1

Grip – Product (All Except 2812ALB) ........................................................................................ 1

Washer – Wavy (All Except 2812ALB)....................................................................................... 1

- 13 -




1

2

3

4

40 THRU 43

39

5

6

38

37

7

8

9-10

11-12

13

29 30

31

32

33

35

34

36

26

24

25

22 21

27

28

23

GAUGE PLATE AND INDEX UNIT

16

14

15

17-18

19

20

PL-57693

F-43081 Rev. D (September 2010) - 14 -



GAUGE PLATE AND INDEX UNIT


PL-57693

PART NO. AMT.

1 SC-041-16 Cap 5 /

16

-18 x 1 3 /

8

Hex Hd. (SST) .................................................................................... 2

2 WS-005-32 Washer

3 SC-123-52 Set 5 /

16

-24 x 5 /

8

Hdls., Flat Pt. .......................................................................................... 4

4 00-438980-00002

5 00-439021-00002 Mount – Special ......................................................................................................................... 1

6 SC-124-11 Set 5 /

16

-24 x 5 /

8

Hdls., Cone Pt. ....................................................................................... 3

7

8

00-875352

00-875364

9

10

00-875361

00-914123

11 SD-038-13

Cover – Gauge Plate (Bottom) .................................................................................................. 1

Retainer – Cover ........................................................................................................................ 1

Disc – Cover (All Except 2612GC) ............................................................................................ 1

Disc – Cover (2612GC) ............................................................................................................. 1

Screw 7 /

8


12 WL-007-20

13 00-439072-00003 Support – Slide Index (Incls. Items 15, 36, & 37) (Order With Item 19) ..................................... 1

14

15

16

00-478432

PG-011-38

00-478425

Spring – Index Backlash ............................................................................................................ 1

Pin – Grooved 5 /

32

x 19 /

32

(SST) .................................................................................................. 1

Bushing – Anti-Rotation Rod ...................................................................................................... 1

17

18

SC-124-46

WL-008-13

19 00-478415

20 SD-038-14

21 00-438886

22

23

00-478426

PG-011-19

24

25

26

27

28

Cap Screw 10-24 x 3 /

4

Socket Hd. ............................................................................................. 3

Lockwasher #10 Internal Shakeproof ........................................................................................ 3

Rod – Index Anti-Rotation .......................................................................................................... 1

/

4

-20 x 7 /

8


Rod – Index Slide ...................................................................................................................... 1

Bushing – Index Slide ................................................................................................................ 2

Pin – Grooved 5 /

32

x 1 /

2

(SST) ..................................................................................................... 1

00-478416-00002 Slide – Index Mechanism (All Except 2612GC) (Incls. Items 16, 17, 18, 22, 23, & 26) ............. 1

00-478416-00003 Slide – Index Mechanism (2612GC) (Incls. Items 16, 17, 18, 22, 23, & 26) .............................. 1

00-478461 Pin – Index Cam ........................................................................................................................ 1

00-479625

00-914122

Cam – Indexing (All Except 2612GC) ........................................................................................ 1

Cam – Indexing (2612GC) ......................................................................................................... 1

29

30

31

00-076948

00-010928-00002 Nut – Special ............................................................................................................................. 1

RP-002-40

32 00-438890

33 00-088298

Disc – Indexing Drive ................................................................................................................. 1

Pin – Roll 3 /

32

Dia. x 3 /

4

Lg. ......................................................................................................... 1

Washer – Belleville .................................................................................................................... 1

34 WS-030-58

35

36

37

38

RP-003-12

SC-088-71

Pin – Roll 1 /

8

Dia. x 1 1 /

4

Lg. ........................................................................................................ 1


8

Hdls., Flat Pt.............................................................................................. 2

00-011800-00305 Pin – Dowel 1 /

4

x 3 /

4

................................................................................................................... 1

00-875373 Plug – Hole (Large) .................................................................................................................... 2

39 00-875375

40 00-914132

41 00-479499

42

43

00-914196

SC-129-13

Plug – Hole (Small) .................................................................................................................... 2

De fl ector – Fluid (Pre-Drilled) (2912B) ...................................................................................... 1

De fl ector – Fluid (Silicone) ......................................................................................................... 1

Template – De fl ector (Fluid) ....................................................................................................... 1


4

Phil. Flat Hd. (SST) ............................................................................... 3

- 15 -




1-2-3

4

16

15

6

14

5

13

12

11

10

18

17

9

19

20

22

21

8

7

32

23

24

31

30

29 25

28

PL-57010

2612

2612C

2612GC

2612PHS

2712

2712C

2712PHS

ML-134231

ML-134233

ML-136100

ML-134234

ML-134235

ML-134237

ML-134238

27

26

2812

2812

2812

2812

2812

2812

2812

2812

2812ALB

2812CB

ML-134239

ML-136110

ML-136112

ML-136164

ML-136167

ML-136168

ML-104616

ML-104617

ML-134243

ML-136141

2812PS

2812PS

2812PS

2812C

2912

2912

2912

2912

KNIFE SHARPENER UNIT

ML-134241

ML-136114

ML-136169

ML-134244

ML-134245

ML-136111

ML-136113

ML-136153

2912

2912

2912

2912

2912PS

2912PS

2912C

2912C

2912B

ML-136154

ML-136188

ML-136189

ML-104996

ML-134247

ML-136175

ML-134248

ML-136174

ML-134251

F-43081 Rev. D (September 2010) - 16 -



KNIFE SHARPENER UNIT


PL-57010

PART NO. AMT.

1

2

3

4

5

SC-067-06

SC-129-63

SC-129-74

Mach. Screw 10-24 x

Mach. Screw 10-24 x

Mach. Screw 10-24 x

1

1

1

/

/

/

2

2

2

Hex Hd. (2612PHS & 2712PHS) ........................................................ 2

Phil. Truss Hd. Nylok (SST) ................................................................ 2

Tx. Button Hd. (2612C, 2712C, 2812C, & 2912C) (SST) ................... 2

00-914682-00003 Plate & Cover Assy. ................................................................................................................... 1

00-875359 Handle – Sharpener Cam .......................................................................................................... 1

6

7

8

00-479953

00-439691

00-873848

9 00-873852

10 00-915162

Screw – Shoulder 1 /

4

- 20 ........................................................................................................... 1

Stone Service Kit ....................................................................................................................... 1

Shaft – Grinding Wheel .............................................................................................................. 1

Housing & Stud Assy.................................................................................................................. 1

11

12

13

00-438437

00-873851

00-875531

14 00-875339

15 SC-122-87

16

17

00-437239

RR-006-22

18 00-438426

19 00-875367

20 00-479527

Spring – Return .......................................................................................................................... 1

Plunger & Ball Bearing Assy. ..................................................................................................... 1

Spring – Main ............................................................................................................................. 1


4

Pan Hd. .................................................................................... 1

Label – Instruction ..................................................................................................................... 1

Ring – Retaining ........................................................................................................................ 1

Washer – Spring Crescent ......................................................................................................... 1

21

22

23

24

25

31

32

SC-122-85

00-439700

SC-122-84

00-438435

00-435814

26

27

28

00-438442

SC-122-87

00-439698

29 00-478747

30 00-435324

Mach. Screw Special 4-40 x 1

Plate – Rear Locking ................................................................................................................. 1


/

4

16

Flat Hd. .................................................................................... 2

Pan Hd. ................................................................................... 1

U-Spring (Long End Inserted Into Housing) ............................................................................... 1

Screw – Retaining (RH) ............................................................................................................. 1

Screw – Shoulder Special .......................................................................................................... 1


4

Pan Hd. .................................................................................... 1

Lever – Locking ......................................................................................................................... 1

Spring – Truing Stone ................................................................................................................ 2

RR-006-22

00-875368

Ring – Retaining ........................................................................................................................ 1

Push Rod – Truing ..................................................................................................................... 1

00-873847-00001 Sharpener Assy. (Incls. Items 2 & 4 thru 32)

(2612, 2612GC, 2712, 2812, 2812ALB, 2812CB, 2812PS, 2912, 2912B, & 2912PS) .............. 1

00-873847-00003 Sharpener Assy. (Incls. Items 1 & 4 thru 32) (2612PHS & 2712PHS) ....................................... 1

00-873847-00004 Sharpener Assy. (Incls. Items 3 thru 32) (2612C, 2712C, 2812, 2812C, & 2912C) .................. 1

00-875046 Sharpener Assy. (No Stones) (Cosmetic) (Incls. Items 3, 4, 9, 14, 21, 22, 26, 27, & 28)

(2612C, 2712C, 2812C, & 2912C) ............................................................................................. 1

- 17 -




4

6

5

7 THRU 11

1-2-3

12-13

14-15

16

17

18

19

23

21-22

20

31

32

33

24-25

29-30

28

26

27

2612

2612C

2612GC

2612PHS

ML-134231

ML-134233

ML-136100

ML-134234

2712

2712C

2712PHS

ML-134235

ML-134237

ML-134238

ELECTRICAL UNIT (2612 & 2712 SERIES)

PL-59526

F-43081 Rev. D (September 2010) - 18 -



ELECTRICAL UNIT (2612 & 2712 SERIES)

ILLUS.

PL-59526

PART NO. NAME OF PART AMT.

1

2

00-117542-00095 Cord & Plug Assy. (100/120 V.) .................................................................................................. 1

00-117542-00096 Cord & Plug Assy. (240 V.) ......................................................................................................... 1

3 00-117542-00039

4

5

6

7

8

FE-021-21

SD-015-41

Strain Relief (Use With Items 1 & 3) .......................................................................................... 1


2

Phil. Pan Hd., Type TT (2612 Series) ......................................... 1

WL-010-01 Washer (Use With Items 1 & 3) (2612 Series) ........................................................................... 1

00-070486-00001 End Cap – Capacitor ................................................................................................................. 1

00-070487-00026 Capacitor – Motor Start .............................................................................................................. 1

9 00-066621-00001 Bracket – Capacitor ................................................................................................................... 1

10 00-875582

11

12

SD-039-25

SD-038-16

(2712C)



8

4

Phil. Flat Hd., Type TT (2712C) ................................................ 1

Hex Washer Hd., Type RL (2612 Series) ................................... 2

13

14

15

16

17

18

19

20

21

22

SD-015-41

SD-038-16

00-438929

SD-015-38

00-439041

SD-038-16

Self-Tapping Screw 8-32 x

00-087714-042-1 Relay (2-Pole) (115 V.) (2712 & 2712C) .................................................................................... 1

00-087714-042-3 Relay (2-Pole) (240 V.) (2712 & 2712PHS) ............................................................................... 1

00-078752-00012 Clamp – Cable ........................................................................................................................... 1


Bracket – Motor Start Switch ..................................................................................................... 1


1

3

/

2

Phil. Pan Hd., Type TT (2712, 2712C, & 2712PHS) ................... 2

8

Hex Washer Hd., Type RL .......................................................... 1

/

8

Phil. Pan Hd., Type TT ............................................................... 2

00-271612-00002 Switch – Electronic Start ............................................................................................................ 1

Bracket – Switch Rod ................................................................................................................ 1


8


23

24

25

26

27

28

29

30

31

32

00-875668

00-439040

SD-038-16

00-087711-148-1

00-873803

SD-038-16

WL-006-43

NS-011-01

00-477523

SC-120-97

Knob – On/Off ............................................................................................................................ 1

Bracket – On/Off Switch............................................................................................................. 1


8


Switch – Toggle (2-Post) (2612, 2612C, 2612GC, 2612PHS, 2712, 2712C, & 2712PHS) ........ 1

Cover – Switch Mylar ................................................................................................................. 1


8

Hex Washer Hd., Type RL (2712, 2712C, & 2712PHS) ............. 2

Lockwasher #4 Medium (2712, 2712C, & 2712PHS) ................................................................ 2

Nut 4-40 Hex (2712, 2712C, & 2712PHS) ................................................................................. 2

Bracket – Switch (2712, 2712C, & 2712PHS) ........................................................................... 1


8

Flat Hd. (SST) (2712, 2712C, & 2712PHS) .......................................... 2

33 00-087711-00319 Switch – Home Start (2712, 2712C, & 2712PHS) ..................................................................... 1

00-438132-00001

00-438132-00002

- 19 -




4

6

5

7 THRU 9

1-2-3

10

11-12

13

14

15

16

2812

2812

2812

17

18-19

20

35

36

37-38-39

40-41

21-22

ML-136110 &

ML-136114 ONLY

45

44

33-34

32

23

30-31

29 42

43

28

27

26

25 24

PL-57694

ML-134239

ML-136110

ML-136112

2812PS

2812PS

2812ALB

2812C

ML-134241

ML-136114

ML-134243

ML-134244

2812CB

2912

2912

ML-136141

ML-134245

ML-136111

2912

2912

2912PS

2912C

ELECTRICAL UNIT (2812 & 2912 PREVIOUS CONSTRUCTION)

ML-136113

ML-136188

ML-134247

ML-134248

F-43081 Rev. D (September 2010) - 20 -



ELECTRICAL UNIT (2812 & 2912 PREVIOUS CONSTRUCTION)

ILLUS.

PL-57694


1

2

00-117542-00095 Cord & Plug Assy. (100/120 V.) .................................................................................................. 1

00-117542-00096 Cord & Plug Assy. (240 V.) ......................................................................................................... 1

3 00-117542-00039

4

5

6

7

8

FE-021-21

SD-015-41



2





9

10

11

12

13

14

15

00-066621-00001 Bracket – Capacitor ................................................................................................................... 1

SD-015-41 Self-Tapping Screw 8-32 x 1 /

2

Phil. Pan Hd., Type TT (2812,2812ALB, 2812C, 2812CB,

2812PS, 2912, 2912C, & 2912PS) ........................................................................................... 2

00-087714-042-1 Relay (2-Pole) (115 V.) (2812, 2812ALB, 2812C, 2812CB, 2812PS, 2912,

2912C, & 2912PS) ..................................................................................................................... 1

00-087714-042-3 Relay (2-Pole) (240 V.) (2812–ML-134239, 2812PS, & 2912–ML-134245) .............................. 1

00-078752-00012 Clamp – Cable ........................................................................................................................... 1

SD-038-16

00-438929


8



16

17

18

19

20

21

22

23

24

25

SD-015-38

00-439041

SD-038-16

00-875668

00-439040

SD-038-16

00-875567

00-873803

SD-038-16

26

27

28

00-479683

00-478427

SC-060-40


8



Bracket – Switch Rod ................................................................................................................ 1


8


Knob – On/Off ............................................................................................................................ 1

Bracket – On/Off Switch............................................................................................................. 1



3

3 /

/

8


Switch Assy. (2812, 2812ALB, 2812C, 2812CB, 2812PS, 2912, 2912C, & 2912PS) ............... 1

Cover – Switch Mylar ................................................................................................................. 1

8

Hex Washer Hd., Type RL (2812, 2812ALB, 2812C, 2812CB,

2812PS, 2912, 2912C, & 2912PS) ............................................................................................ 2

Bracket – Switch (2812, 2812ALB, 2812C, 2812CB, 2812PS, 2912, 2912C,

Spacer – Nylon (2812, 2812ALB, 2812C, 2812CB, 2812PS, 2912, 2912C, & 2912PS) ........... 2


8

Rd. Hd. (2812, 2812ALB, 2812C, 2812CB, 2812PS, 2912,

29

30

31

32

33

34

35

00-087711-00349 Switch – Snap Action (2812, 2812ALB, 2812C, 2812CB, 2812PS, 2912, 2912C, & 2912PS) .. 1

00-087714-069-2 Timer – Relay (230 V.) (2812 & 2812PS)................................................................................... 1

00-087714-069-1 Timer – Relay (115 V.) (2812–ML-134239, 2812CB, 2812PS–ML-134241, 2812ALB, & 2912) 1

SD-038-16

WL-006-43

NS-011-01

00-477523

2912C, & 2912PS) ..................................................................................................................... 2


8

Hex Washer Hd., Type RL (2812,2812ALB, 2812C, 2812CB,

2812PS, 2912, 2912C, & 2912PS) ............................................................................................ 2

Lockwasher #4 Medium (2812, 2812ALB, 2812C, 2812CB, 2812PS, 2912,

2912C, & 2912PS) ..................................................................................................................... 2

Nut 4-40 Hex (2812, 2812ALB, 2812C, 2812PS, 2912, 2912C, & 2912PS) ............................. 2

Bracket – Switch (2812, 2812ALB, 2812C, 2812CB, 2812PS, 2912, 2912C, & 2912PS) ......... 1

36

37

38

39

40

41

42

43

44

SC-120-97 Mach. Screw 4-40 x 3 /

8

Flat Hd. (SST) (2812, 2812ALB, 2812C,2812CB, 2812PS, 2912,

2912C, & 2912PS) .................................................................................................................... 2

00-087711-00319 Switch – Home Start (2912, & 2912C) ....................................................................................... 1

00-087711-00336 Switch – Home Start (2912PS) .................................................................................................. 1

00-087711-00276 Switch – Home Start (2812–ML-134239, 2812ALB, 2812C, 2812CB, & 2812PS–ML-134241) 1

00-087711-00264 Switch – Slice Count (2812PS) .................................................................................................. 1


DS-037-95 Self-Tapping Screw 10-24 X 1 Phil. Pan Hd. ............................................................................. 1

00-087714-069-1 Timer Relay (115 V.) (2812–ML-136110 & 2812PS–ML-136114) .............................................. 1

00-087714-00063 Relay (115 V.) (2812–ML-136110 & 2812PS–ML-136114) ........................................................ 2

45 SD-038-16 Self-Tapping Screw 6-32 x

Clamp

Clamp

00-438132-00003

3 /

8


/

16

) (2812, 2812PS, 2812C, & 2812CB) ....................................................................... 1

- 21 -




4

6

5

7-8-9

1-2-3

10

11-12

13

14

15

16

19

17

21

20

22 THRU 25

18

44

43

26-27

45

42

2812

2812

2812

47

28-29

46

30

39

40

41

31

32

37

38

33 36

34

35

ML-104616

ML-104617

ML-136164

2812

2812

2812PS

ML-136167

ML-136168

ML-136169

2912

2912

2912

2912

ML-136153

ML-136154

ML-136189

ML-104996

2912PS

2912C

2912B

ELECTRICAL UNIT (2812 & 2912 CURRENT CONSTRUCTION)

PL-59332

ML-136175

ML-136174

ML-136189

F-43081 Rev. D (September 2010) - 22 -



ELECTRICAL UNIT (2812 & 2912 CURRENT CONSTRUCTION)

ILLUS.

PL-59332


1

2

3 00-117542-00039

4

5

00-117542-00095 Cord & Plug Assy. (100/120 V.) .................................................................................................. 1

00-117542-00096 Cord & Plug Assy. (240 V.) ......................................................................................................... 1

FE-021-21

SD-015-41

............................................................................................................................... 1



2


6

7

8

9




00-066621-00001 Bracket – Capacitor ................................................................................................................... 1

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

SD-015-41

SD-038-16

00-438929

SD-038-16


00-087714-042-1 Relay (2-Pole) (115 V.) ............................................................................................................... 1

00-087714-042-3 Relay (2-Pole) (240 V.) .............................................................................................................. 1

00-078752-00012 Clamp – Cable ........................................................................................................................... 1




1

3

/

2


8


/

8



00-875668

00-873635

Knob – On/Off ............................................................................................................................ 1

PCB Assy. – Knife Motor Control (2912B) ................................................................................. 1

SC-120-97

00-477523


8

Flat Hd. (SST) ....................................................................................... 2

Bracket – Switch ........................................................................................................................ 1

00-087711-00334 Switch – Home Start (2912B) .................................................................................................... 1

00-087711-00319 Switch – Home Start (2912C) .................................................................................................... 1

00-087711-00336 Switch – Home Start (2912PS) .................................................................................................. 1

00-087711-00276 Switch – Home Start (2812, ML-134239, ML-104617, 2812ALB, 2812CB, 2812C, & 2812PS) 1



WL-006-43

NS-011-01

Lockwasher #4 Medium ............................................................................................................. 2

Nut 4-40 Hex .............................................................................................................................. 2


8


00-087714-069-1 Timer – Relay (115 V.) ............................................................................................................... 1

00-087711-00349 Switch – Snap Action ................................................................................................................. 1

SC-060-40 Mach. Screw 4-40 x 5 /

8

Slotted Rd. Hd. ..................................................................................... 2

30

31

32

33

34

35

36

37

00-478427

00-479683

SD-038-16

SC-122-53

Spacer – Nylon (2812, 2812C, 2812ALB, 2812CB, 2812PS, 2912, 2912B,

2912C, & 2912PS) ..................................................................................................................... 2

Bracket – Switch ........................................................................................................................ 1



8


8

Phil. Pan Hd. ......................................................................................... 2

38

39

40


41 00-087711-00349

42

00-087711-00349

SD-038-16

SC-122-53

00-914129

.................................................................................................................. 1


(Stop)

8

3 /

8


Phil. Pan Hd. ......................................................................................... 2

Pad – Dampening ...................................................................................................................... 1

43

44

45

46

47

RR-009-03 Ring – Retaining ........................................................................................................................ 1

00-875700-00002 Plate – Mounting ........................................................................................................................ 1

00-873664

SC-129-23

00-914231

Arm – Switch Pivot ..................................................................................................................... 1


4

Phil. Pan Hd. ......................................................................................... 1

Standoff – Pivot Arm .................................................................................................................. 1

00-438132-00002

00-438132-00003

00-875744

Clamp

( 5 /

Kit – Start/Stop/Pause Switch (Incls. Items 18, 37 thru 47)

(2812C, 2812PS, 2912, ML-136153, ML-136188, ML-136189, 2912B, 2912C, & 2912PS) .... 1

- 23 -




1

39

2-3

4

38

37

5

6

7

8-9

32

33

31

PULL TO START

PUSH TO STOP

30

29

28

26-27

25

20

THRU

24

10-11-12

13

14-15-16

19

18

17

PL-57004

36

2612

2612C

2612GC

2612PHS

ML-134231

ML-134233

ML-136100

ML-134234

2812

2812

2812

2812

2812

34-35

ML-134239

ML-136110

ML-136112

ML-104616

ML-136168

2812

2812

2812

2812C

BASE UNIT

(2612 & 2812 SERIES)

ML-104617

ML-136164

ML-136167

ML-134244

2812CB

2812PS

2812PS

2812PS

2812ALB

ML-136141

ML-136114

ML-134241

ML-136169

ML-134243

F-43081 Rev. D (September 2010) - 24 -



BASE UNIT

(2612 & 2812 SERIES)


PL-57004

PART NO. AMT.

1 00-873733 Pin – Lock .................................................................................................................................. 1

2 00-479636-00005 Mount – Sharpener Housing ...................................................................................................... 1

3 SD-038-13 Self-Tapping 5 /

16

-18 x 7 /

8


4 00-438131-061-2 Label – Warning ......................................................................................................................... 1

5

6

00-477739

00-479033

Logo – Hobart (Large) ............................................................................................................... 1

Nut – Hump (2812PS) ............................................................................................................... 1

7

8

00-875347 Ring – Drip ................................................................................................................................. 1

00-438131-054-2 Label – Warning ......................................................................................................................... 1

9 00-121676-00001

10 00-875370 Dial Assy. (All Except 2812CB) .................................................................................................. 1

11 00-875370-00002

12 00-077629

13 00-875348

14 SC-126-30

15

16

SC-023-10

SC-121-95

17

18

00-477773

00-873766

19 00-875371

20

21

00-875349

00-479745

22

23

24

25

26

Knob – Indexing ......................................................................................................................... 1


4

Mach. Screw 10-24 x 3

Hex Hd. (2612PHS) ............................................................................ 1

/

4

Oval Hd. .............................................................................................. 1


8

Hex Flat Hd. (2612C & 2812C) ........................................................... 1

Leg Set (4 In.) (Packaged) ......................................................................................................... 1

Leg Set (3 In.) (Packaged) ......................................................................................................... 1

Bezel – Index ............................................................................................................................. 1

Bezel – Index (2612C & 2812C) ................................................................................................ 1

SD-038-21

SD-038-20

00-477735

Self-Tapping Screw 8-32 x 1 1 /

4

Phil. Pan Hd., Type TT .............................................................. 2

Self-Tapping Screw 8-32 x 1 Phil. Pan Hd., Type TT ................................................................. 2

Label – Start/Stop ...................................................................................................................... 1

00-479655 Lock Bracket (2612C & 2812C) ................................................................................................. 1

00-439042-00001 Lamp (125 V.) ............................................................................................................................ 1

27 00-439042-00002 Lamp (250 V.) ............................................................................................................................ 1

28 SC-041-02

29 00-477740 Logo – Hobart (Small) ............................................................................................................... 2

30 WL-014-10

31 NS-015-01

32

33

34

35

36

37

38

39

00-437865

00-478023

SD-038-76

SD-038-16

00-873738

SD-038-16

WL-019-32

00-477227

Leg – Cleaning ........................................................................................................................... 1

Cap – Lift Leg ............................................................................................................................ 1


8

Hex Hd., Type RL (2612PHS) ................................................... 11


8


Cover – Bottom .......................................................................................................................... 1


8

Hex Washer Hd., Type RL (2812PS) .......................................... 6

Lockwasher #6 External (2812PS) ............................................................................................ 6

Scale – PCB Assy. (2812PS) ..................................................................................................... 1

- 25 -




1

2-3

4

5

6

7

8-9

24

10-11

12

13-14-15

Pull to Start/Pause

Push to Stop

22-23

16 THRU 21

25

29

PL-57014

26-27

2712

2712C

2712PHS

ML-134235

ML-134237

ML-134238

2912

2912

2912

2912

28

ML-134245

ML-136111

ML-136113

ML-136153

2912

2912

2912

2912

BASE UNIT

(2712 & 2912 SERIES)

ML-136154

ML-136188

ML-136189

ML-104996

2912PS

2912PS

2912C

2912C

2912B

ML-134247

ML-136175

ML-134248

ML-136174

ML-134251

F-43081 Rev. D (September 2010) - 26 -



BASE UNIT

(2712 & 2912 SERIES)


PL-57014

PART NO. AMT.

1

2

00-873733 Pin – Lock .................................................................................................................................. 1

00-479636-00005 Mount – Sharpener Housing ...................................................................................................... 1

3 SD-038-13 Self-Tapping 5 /

16

-18 x 7 /

8


4 00-438131-061-2 Label – Warning ......................................................................................................................... 1

5

6

7

00-477739

00-479033

00-875347

Logo – Hobart (Large) ............................................................................................................... 1

Nut – Hump (2912PS) ............................................................................................................... 1

Ring – Drip ................................................................................................................................. 1

8 00-438131-054-2 Label – Warning ......................................................................................................................... 1

9 00-121676-00001

10 00-875370

11 00-077629

12 00-875348

13

14

SC-126-30

SC-023-10

15

16

17

18

19

20

21

22

23

24

SC-121-95

00-477735

00-873623

Knob – Indexing ......................................................................................................................... 1


4

Hex Hd. (2712PHS) ............................................................................ 1


4

Oval Hd. .............................................................................................. 1


4

Hex Flat Hd. (2712C & 2912C) ........................................................... 1

Label – Start/Stop (2712, 2712C, 2912, 2912C, & 2912PS) ..................................................... 1

Label – Start/Stop/Pause (2912B) ............................................................................................. 1

00-875349

00-479745

Bezel – Index (2712, 2912, & 2912PS) ..................................................................................... 1

Bezel – Index (2712C & 2912C) ................................................................................................ 1

SD-038-21

SD-038-20

Self-Tapping Screw 8-32 x 1 1 /

4

Phil. Pan Hd., Type TT .............................................................. 2

Self-Tapping Screw 8-32 x 1 Phil. Pan Hd., Type TT ................................................................. 2

00-439042-00001 Lamp (125 V.) ............................................................................................................................ 1

25

26

27

28

29

00-439042-00002 Lamp (250 V.) ............................................................................................................................ 1

00-477740 Logo – Hobart (Small) ................................................................................................................ 2

00-479655

SD-038-76

SD-038-16

00-479680

00-478036

Bracket – Lock (2712C & 2912C) .............................................................................................. 1

Self-Tapping Screw 6-32 x 3


/

8

Hex Hd., Type RL (2712PHS) .................................................... 5

8


Gasket – Chute (2912PS) .......................................................................................................... 1

Cover – Upper Electrical ............................................................................................................ 1

- 27 -




1 TH RU 4

18

48

49

50

45-46-47

44

43

42

41

36

35

ML-134247 ONLY

39

40 37

38

17

5-6-7

8-9

10 11

12

13

14

15

16

22

19

23

24

20-21

Low

27

29

28 25-26

31

30

32-33

34

PL-57000

2712

2712C

2712PHS

ML-134235

ML-134237

ML-134238

2912

2912

2912

2912

ML-134245

ML-136111

ML-136113

ML-136153

2912

2912

2912

2912

AUTOMATIC BASE UNIT

ML-136154

ML-136188

ML-136189

ML-104996

2912PS

2912PS

2912C

2912C

2912B

ML-134247

ML-136175

ML-134248

ML-136174

ML-134251

F-43081 Rev. D (September 2010) - 28 -



AUTOMATIC BASE UNIT


PL-57000

PART NO. AMT.

5

6

7

8

9

1

2

3

4

SC-040-53

WL-006-07

00-479531

00-873654

00-873230

00-478383

00-873630

00-873236

00-873235


8

Hex Socket Hd. ................................................................................... 4

Lockwasher #10 Helical ............................................................................................................. 4

Motor (115 V. Machines) (90 VDC) ............................................................................................ 1

Motor (230 V. Machines) (180 VDC) .......................................................................................... 1

Potentiometer Kit Assy. (2912 & 2912C).................................................................................... 1

Switch Assy. (2712, 2712C, & 2712PHS) .................................................................................. 1

PCB Assy. – Carriage Speed (2912B) ....................................................................................... 1

Stop – Multi-Speed Slicer (2912 & 2912C) ................................................................................ 1

Stop – Two-Speed Control (2712, 2712C, & 2712PHS) ............................................................ 1

10

11

12

15

16

17

18

19

NS-011-12

WL-006-01

00-873234

13 00-106502

14 00-108001

00-478299

00-875366

00-873700

00-875356

00-875220

Nut 8-32 Hex (SST) (All Except 2912PS) .................................................................................. 2

Lockwasher #8 (SST) (All Except 2912PS) ............................................................................... 2

Bracket – Speed Control (All Except 2912PS) .......................................................................... 1

Push .................................................................................................................................... 1

Foot – Lift Lever ......................................................................................................................... 1

Spacer – Lift Lever ..................................................................................................................... 1

Bearing – Lift Lever .................................................................................................................... 1

Lever – Lifting Assy. (Incls. Items 13, 14, 15, & 18) ................................................................... 1

Handle – Lift Lever ..................................................................................................................... 1

Retainer – Lift Lever .................................................................................................................. 1

/

4

-20 x 3 /

4

Hex Hd., Type F ........................................................................ 2

/

4

-20 x 3 /

4

Hex Hd., Type F (2712PHS) ..................................................... 2

Screw 1 /

4

Hex Hd. ............................................................................................... 4

20 SD-009-16

21 SD-038-77

22 SC-125-16

23

24

25

26

27

28

29

00-478409

00-478039

00-479288

00-478274

SC-055-23

00-875358

00-478265

Pin – Auto/Manual Stop 1 /

4

x 1 ................................................................................................... 2

Bearing – Carrier Shaft .............................................................................................................. 1

Label – Auto/Manual (Domestic) (2912PS) ............................................................................... 1

Label – Auto/Manual (Domestic) (2712, 2712C, 2712PHS, 2912, & 2912C) ............................ 1


8

Socket Hdls., Cup Pt. (All Except 2912PS) ............................................... 2

Knob Assy. – Speed Control (All Except 2912PS) ..................................................................... 1

Label – Speed Select (Domestic) (2912 & 2912C) .................................................................... 1

30

31

00-478296

00-875143

Label – Speed Select (Domestic) (2712, 2712C, & 2712PHS) ................................................. 1

Gasket – Bezel (2912PS) .......................................................................................................... 1

32 00-873506-00002

33

34

SD-038-53

00-479614


8

Hex Washer Hd., Type RL (2912PS) .......................................... 6

Keypad – Scale (2912PS) ......................................................................................................... 1

35

36

37

38

39

40

41

42

43

44

WL-006-40

NS-011-07

00-873641

SC-118-55

00-873638

SC-118-55

00-875372

00-478275

00-873727

00-875371

Lockwasher #6 Light (2912PS) .................................................................................................. 6

Nut 6-32 Hex (2912PS) ............................................................................................................. 6

PCB Assy. – Speed/Position Sensor (2912B) ............................................................................ 1

Mach. Screw M3 x 0.5 x 8mm Slotted Pan Hd. (SST) (For PCB.) ............................................. 1

Vane – Sensor (2912B).............................................................................................................. 1

Mach. Screw M3 x 0.5 x 8mm Slotted Pan Hd. (SST) (For Vane) ............................................. 1

Foot – Short ............................................................................................................................... 4

Leg Set (4 In.) ............................................................................................................................ 1

Leg Set (3 In.) ............................................................................................................................ 1

Foot – Tall (2912B)..................................................................................................................... 4

45

46

47

48

49

00-873698-00002 Base – Automatic (Painted) (All Except 2712PHS & 2912PS) .................................................. 1

00-873698-00003 Base – Automatic (Painted) (2912PS) ....................................................................................... 1

00-873698-00004 Base – Automatic (Polished Aluminum) (2712PHS) .................................................................. 1

00-478039

00-875373

Bearing – Carrier Shaft .............................................................................................................. 1

Plug – Hole (Large) .................................................................................................................... 1

50 00-478441

00-478467

00-478449

Grommet – Electric .................................................................................................................... 2

Kit – Motor Brush (Bodine Motor) .............................................................................................. 2

Kit – Motor Brush (Bison Motor) ................................................................................................ 1

00-479684 Kit – Motor Brush (Worldport Motor) (Turdan) ........................................................................... 1

* 00-915165 Sub-base (Painted)

(Incls. Items 5, 8, 10, 11, 12, 23, 24, 26 thru 29, 41, 45, 48, 49, & 51) (2912) .......................... 1

* 00-915166 Sub-base (Burnished)

(Incls. Items 5, 8, 10, 11, 12, 23, 24, 26 thru 29, 41, 47, 48, 49, & 51) (2912) .......................... 1

00-873255

00-875396

Tall Foot & Skid Plate Assy. (2912B).......................................................................................... 1

Tall Foot & Skid Plate Assy. (With Wall Chart) (2912B) ............................................................. 1

*Additional items included in this assembly are listed in Auto Carrier Unit.

- 29 F-43081 Rev. D (September 2010)



11

40

9

10

HOBART

8

1

2

3

4-5-6

7

37

38-39

36

35

34

32-33

20 18-19

17

16

15

27

21

22

24

23

25

26

12

13

14

31

28

30

29

2612

2612C

2612GC

2612PHS

ML-134231

ML-134233

ML-136100

ML-134234

2712

2712C

2712PHS

ML-134235

ML-134237

ML-134238

TRANSPORT CARRIAGE UNIT

(2612 & 2712 SERIES)

PL-57013

F-43081 Rev. D (September 2010) - 30 -




(2612 & 2712 SERIES)


PL-57013

PART NO. AMT.

1

2

00-477555

00-438907

Bumper – Slide Rod ................................................................................................................... 1

Slide – Rod ................................................................................................................................ 1

3 00-875658 Bearing

4 00-875659 Transport – Carriage .................................................................................................................. 1

5 00-875374 Plug – Transport Hole ................................................................................................................ 6

6 00-439064 Magnet

7 00-439017 Wick – Slide Rod Lubrication ..................................................................................................... 1

8

9

SD-038-16

00-478424


8


Cover – Interlock ........................................................................................................................ 1

10 00-479676-00002

11

12

00-913102-00090 Washer & Crown Nut

00-439045

1 /

4

-20 ........................................................................................................ 4

Stud – Drive ............................................................................................................................... 2

13

14

00-875450

00-478021

Knob – SPRT Tray Assy. ............................................................................................................ 1


15

16

17

RR-012-17

00-435708

00-477555

18 SC-128-35

19 NS-018-06

Ring – Retaining ........................................................................................................................ 1

Washer – Backup (SST) ............................................................................................................ 2

Bumper – Slide Rod ................................................................................................................... 1

20

21

22

00-519826

00-439006

00-477733

23 SC-123-08

24 00-438902

25

26

27

00-873535-00002 Plate – Key ................................................................................................................................ 1

00-873534-00002 Pivot – Tiltable Carrier ............................................................................................................... 1

00-875445

28 00-438900

29 SD-038-16

Shaft – Pivot Return ................................................................................................................... 1


8


30

31

32

00-438908

SD-038-22

00-477747

33 NS-017-20

34 RR-006-23

Insert – Screw ............................................................................................................................ 1

Bearing – Pivot .......................................................................................................................... 2

Label – Start (Home) (2712, 2712C, & 2712PHS) ..................................................................... 1

/

4

-20 x 5 /

8

Socket Hd. .............................................................................................. 2

Spring – Interlock Bar ................................................................................................................ 1

Bar – Transport Roller ................................................................................................................ 1


2

Hex Washer Hd., Type RL ........................................................ 4

Set Screw – Special ................................................................................................................... 1

Ring – Retaining ........................................................................................................................ 1

35 00-478420

36 00-438911

37 SD-033-08

38 WS-003-49

39 SC-123-56

40 00-437906

Screw 1 /

2

Hex Button Hd. .................................................................................... 1

Bottle – Oil and Label Assy. ....................................................................................................... 1

- 31 -




11

9

21 10

HOBART

8

1

2

3

4-5-6

7

48

49-50

47

46

45

43-44

20

18-19

17

16

15

23

22

51

25

24

26

27

12

13

14

41 28

42

39

38

37

40

36

29

2812

2812

2812

2812

2812

2812PS

2812PS

34

35

33

32

31 30

ML-134239

ML-136110

ML-136112

ML-104616

ML-104617

ML-134241

ML-136114

2812PS

2812PS

2812ALB

2812ALB

2812C

2812C

2812CB

ML-136167

ML-136169

ML-136164

ML-134243

ML-134244

ML-136168

ML-136141

2912

2912

2912

2912

2912

2912

2912

ML-134245

ML-136111

ML-136113

ML-136153

ML-136154

ML-136188

ML-136189


(2812 & 2912 SERIES)

2912

2912PS

2912PS

2912C

2912C

2912B

PL-57087

ML-104996

ML-134247

ML-136175

ML-134248

ML-136174

ML-134251

F-43081 Rev. D (September 2010) - 32 -




(2812 & 2912 SERIES)


PL-57087

PART NO. AMT.

1

2

00-477555

00-438907

Bumper – Slide Rod ................................................................................................................... 1

Slide – Rod ................................................................................................................................ 1

3 00-875658 Bearing

4

5

00-875659

00-875374

Transport – Carriage .................................................................................................................. 1

Plug – Transport Hole ................................................................................................................ 6

6 00-439064 Magnet

7

8

00-439017

SD-038-16

Wick – Slide Rod Lubrication ..................................................................................................... 1


8


9 00-478424 Cover – Interlock ........................................................................................................................ 1

10 00-479676-00001

11

12

13

14

15

16

17

00-913102-00090 Washer & Crown Nut 1 /

4

-20 ........................................................................................................ 4

00-439045

00-875450

Stud – Drive ............................................................................................................................... 2

Knob – SPRT Tray Assy. ............................................................................................................ 1

00-478021

RR-012-17

00-435708

00-477555

18 SC-128-35


Ring – Retaining ........................................................................................................................ 1

Washer – Backup (SST) ............................................................................................................ 2

Bumper – Slide Rod ................................................................................................................... 1

19 NS-018-06

20 00-519826

21

22

23

00-437906

00-477733

00-439006

24 SC-123-08

25 00-438902

Insert – Screw ............................................................................................................................ 1

Bottle – Oil and Label Assy. ....................................................................................................... 1

Label – Start (Home) ................................................................................................................. 1

Bearing – Pivot .......................................................................................................................... 2

/

4

-20 x 5 /

8

Socket Hd. .............................................................................................. 2

Spring – Interlock Bar ................................................................................................................ 1

26

27

28

00-873535-00002 Plate – Key ................................................................................................................................ 1

00-873534-00002 Pivot – Tiltable Carrier ............................................................................................................... 1

00-438903

29 00-438900

30 SD-038-16

Shaft – Interlock Bar .................................................................................................................. 1


8


31 00-479682-00002 Plate – Pivoting Interlock ........................................................................................................... 1

32 SC-125-12 Screw 1 /

2

Hex Hdls., Cup Pt. ................................................................................... 1

33 00-438897 Spring – Plate Pivoting .............................................................................................................. 1

34

35

00-438896

SD-038-22

Clip – Plate Pivoting ................................................................................................................... 2


2


36

37

38

39

40

41

42

SD-038-22

00-478421

00-477749

SC-123-07

00-438908

00-915103

00-477747

43 NS-017-20

44 RR-006-23

45 WS-003-49


2


Follower – Interlock Plate .......................................................................................................... 1

Bushing – Follower & Wick Cover ............................................................................................. 1

Mach. Screw – Special 8-32 x 1 /

2

Truss Hd................................................................................ 1

Bar – Transport Roller ................................................................................................................ 1

Bar – Lockout ............................................................................................................................. 1

Set Screw – Special ................................................................................................................... 1

Ring – Retaining ........................................................................................................................ 1

46 00-478420

47 00-438911

48 SC-123-56

49 SD-033-08

50 SD-015-07

51 00-478428

Screw 1 /

2

Screw

Hex Button Hd. .................................................................................... 1

5 /

8


Bar – Transport Interlock ........................................................................................................... 1

- 33 -




54

55

1-2

56

57

58

59

8

6

7

5

4

3

14

9

10

11-12-13

18

21 22

23

24

19

20

15

16

17

53

52

25-26

51

50 49

43 THRU 48

42

38

27

28

29

40 39

41

PL-57003

2712

2712C

2712PHS

ML-134235

ML-134237

ML-134238

2912

2912

2912

2912

37

36

35

34

32

33

ML-134245

ML-136111

ML-136113

ML-136153

2912

2912

2912

2912

ML-136154

ML-136188

ML-136189

ML-104996

2912PS

2912PS

2912C

2912C

2912B

AUTOMATIC CARRIER UNIT

31

30

ML-134247

ML-136175

ML-134248

ML-136174

ML-134251

F-43081 Rev. D (September 2010) - 34 -



AUTOMATIC CARRIER UNIT

ILLUS.

PL-57003


1

2

3

4

00-477767

RR-010-06

SD-024-29

Shaft – Pawl ............................................................................................................................... 1

Ring – Retaining ........................................................................................................................ 2

00-875474-00002 Bracket – Pawl ........................................................................................................................... 1


4

Flat Hd., Type TT ...................................................................... 3

5 00-478429 Spring – Pawl ............................................................................................................................. 1

6 00-873591 Pawl

7

8

WL-007-02

SC-009-49

Lockwasher #6 External ............................................................................................................ 1


8

Rd. Hd................................................................................................... 1

9 WL-007-07 ........................................................................................................................... 2

10 SC-007-68 Mach. Screw 8-32 x

11 00-477755-00002

5 /

8

Rd. Hd................................................................................................... 2

12

13

14

00-478269

00-478277

RR-007-21

15 SD-038-22

16 WL-008-13

17 00-478407

18 00-478406

19 NS-017-41

20 WL-019-12

21 00-477775

Bearing – Carrier (Auto) ............................................................................................................. 2

Wick – Carrier ............................................................................................................................ 1

Ring – Retaining ........................................................................................................................ 2


2


Lockwasher ......................................................................................................................... 2

Spring – Auto/Manual Lock ........................................................................................................ 2

22

23

24

25

26

27

28

29

30

31

WL-007-02

SC-009-49

00-478003

00-477781

RP-005-04

00-478027

00-478040

RR-009-05

00-478030

RR-007-21

Lockwasher #6 External ............................................................................................................ 2


8

Rd. Hd................................................................................................... 2

Main Link Assy. (Incls. Item 21) ................................................................................................. 1

Pivot – Main Link ....................................................................................................................... 1

Pin – Roll 1 /

8

Dia. x 3 /

4

Lg. ........................................................................................................... 1

Bearing – Main Link ................................................................................................................... 1

Washer – Main Link ................................................................................................................... 2

Ring – Retaining ........................................................................................................................ 1

Bearing – Motor Link .................................................................................................................. 1

Ring – Retaining ........................................................................................................................ 1

32

33

34

00-478005

RR-007-21

00-478030

35 00-873438

36 WL-007-16

37

38

39

40

41

42

43

44

45

46

47

48

49

SC-118-17

00-478028

RR-009-03

00-478006

RR-009-03

Link Assy. – Motor Drive ............................................................................................................ 1

Ring – Retaining ........................................................................................................................ 1

Bearing – Motor Link .................................................................................................................. 1

Motor Crank Link Assy. .............................................................................................................. 1

00-478028 Bearing – Carrier Link ................................................................................................................ 1

00-087711-00270 Switch – Auto/Manual (2912PS Uses Quantity of 2) ................................................................. 1

00-478284 Barrier – Mylar ........................................................................................................................... 1

NS-009-02

WL-006-43

Nut 4-40 Hex .............................................................................................................................. 2

Lockwasher #4 Medium ............................................................................................................. 2

SC-060-40

SC-112-90

00-478408

50 NS-018-01

51 00-875353

/

4

-20 x 1 1 /

4

Hex Hd. ................................................................................................. 1

Bearing – Carrier Link ................................................................................................................ 1

Ring – Retaining ........................................................................................................................ 1

Link Assy. – Carrier .................................................................................................................... 1

Ring – Retaining ........................................................................................................................ 1


8

Pan Hd. ................................................................................................. 2

Mach. Screw 4-40 x 1 Slotted Pan Hd. (2912PS) ...................................................................... 2

Pin – Carrier Shaft ..................................................................................................................... 1

Knob & Lever Assy. .................................................................................................................... 1

52 00-477764

53

54

55

56

00-479950

00-479954

SD-038-16

00-478024

Grommet – Electrical ................................................................................................................. 1

Bracket – Switch ........................................................................................................................ 1


8


Lock – Swivel ............................................................................................................................. 1

57 00-477761-00002

58 00-478025 Nut – Swivel Lock ...................................................................................................................... 1

59 00-477763-00002

* 00-915165 Sub-base (Painted)

(Incls. Items 9 thru 18, 21 thru 23, 43 thru 47, & 49 thru 59) (2912) .......................................... 1

* 00-915166 Sub-base (Burnished)

(Incls. Items 9 thru 18, 21 thru 23, 43 thru 47, & 49 thru 59) (2912) .......................................... 1

*Additional items included in this assembly are listed in Automatic Base Unit.

- 35 F-43081 Rev. D (September 2010)



22

21

1

2

3 THRU 7

8 THRU 12

13-14

15

17 THRU 20

16

PL-57015

2712

2712C

2712PHS

ML-134235

ML-134237

ML-134238

2912

2912

2912

2912

ML-134245

ML-136111

ML-136113

ML-136153

2912

2912

2912

2912

ML-136154

ML-136188

ML-136189

ML-104996

ELECTRICAL COVER ASSEMBLY

2912C

2912C

ML-134248

ML-136174

ILLUS.

PL-57015


1

2

6

7

8

9

NL-011-12

WL-014-05

WL-007-01

NS-009-07

00-479708

00-478392

10 WS-023-22

Nut 8-32 Hex (SST) ................................................................................................................... 1

Lockwasher #8 External (SST) .................................................................................................. 1

3

4

00-087714-042-1 Relay (2-Pole) (115 V.) ............................................................................................................... 1

00-087714-042-3 Relay (2-Pole) (240 V.) .............................................................................................................. 1

5 WS-023-22 Washer

Lockwasher #6 External Shakeproof ......................................................................................... 2

Nut 6-32 Hex .............................................................................................................................. 2

Board – Printed Circuit ............................................................................................................... 1

Spacer – Nylon .......................................................................................................................... 2

11

12

13

14

15

16

17

WL-007-01

NS-009-07

SD-038-16


Nut 6-32 Hex .............................................................................................................................. 2

00-873485-00001 Cover – Electrical (Without Auto Shutoff)................................................................................... 1

00-873485-00002 Cover – Electrical (With Auto Shutoff)........................................................................................ 1


8


00-088196-00028 Breaker – 2 Amp. Thermal Overload ......................................................................................... 1

00-087714-069-1 Timer – Relay (115 V.) (Auto Shutoff Only) ................................................................................ 1

18

19

20

21

22

WS-022-01

WL-014-07

NS-011-18

Washer (2912 & 2912C) ............................................................................................................ 1

Lockwasher #10 External Shakeproof (SST) ............................................................................. 1

Nut 10-24 Hex (SST) (2912 & 2912C) ....................................................................................... 1


8


00-478034-00001 Cover – Bottom .......................................................................................................................... 1

F-43081 Rev. D (September 2010) - 36 -



12

9

11

10

13

8

7

6

1 THRU 4

5

PL-57690


(2912B, ML-134251)

ILLUS.

PL-57690


1 WL-007-01 Lockwasher #6 External Shakeproof ......................................................................................... 5

2 WS-031-32 Washer

3 NS-009-07 Nut 6-32 Hex .............................................................................................................................. 5

4 00-478285-00002

5

6


8


00-088196-00028 Breaker – Thermal Overload (2 Amp.) ....................................................................................... 1

7

8

00-087714-042-1 Relay (2-Pole) (115 V.) ............................................................................................................... 1

00-873633 PCB Assy. – Slicer Control Board .............................................................................................. 1

9

10

11

12

13

00-873485-00003 Cover – Electrical (115 V.) ......................................................................................................... 1

WL-014-05 Lockwasher #8 External (SST) .................................................................................................. 1

NS-011-12 Nut 8-32 Hex (SST) ................................................................................................................... 1

00-478034-00001 Cover – Bottom .......................................................................................................................... 1


8


- 37 F-43081 Rev. D (September 2010)



27

28

23 THRU 26

22

19-20-21

18

29

16-17

11 THRU 15

10

8-9

7

1-2-3

4

5

6

30-31

PL-57089

32


(2912PS, ML-134247 & ML-136175)

ILLUS.

PL-57089


1 WL-007-01 Lockwasher #6 External Shakeproof ......................................................................................... 3

2 WS-031-32 Washer

3 NS-009-07 Nut 6-32 Hex .............................................................................................................................. 3

4 00-478285-00003

5 00-478285-00002

6 SD-038-16 Self-Tapping Screw 6-32 x 3 /

8


7 00-088196-00028 Breaker – 2 Amp. Thermal Overload ......................................................................................... 1

8 00-478285-00002 ..................................................................................................................................... 2

9

10

11

SC-018-60

00-873169

00-479708

12 00-478392

13 WS-023-22


8

............................................................................................................. 2

PCB Assy. – Scale ..................................................................................................................... 1

Board – Printed Circuit ............................................................................................................... 1

Spacer – Nylon .......................................................................................................................... 2

14

15

16

WL-007-01

NS-009-07


Nut 6-32 Hex .............................................................................................................................. 2

00-873485-00001 Cover – Electrical (Without Auto Shutoff)................................................................................... 1

17

18

19

21

00-873485-00002 Cover – Electrical (With Auto Shutoff)........................................................................................ 1

NS-009-07 Nut 6-32 Hex .............................................................................................................................. 1

NS-009-07

20 WS-023-22

WL-007-01

Nut 6-32 Hex .............................................................................................................................. 1


22

23

27

28

00-873566 PCB Assy. – Slicer Control Board .............................................................................................. 1

00-087714-042-1 Relay (2-Pole) (115 V.) ............................................................................................................... 1

24 WS-023-22

25 WL-007-01

26 NS-009-07

NS-011-12

WL-014-05


Nut 6-32 Hex .............................................................................................................................. 2

Nut 8-32 Hex (SST) ................................................................................................................... 1

Lockwasher #8 External (SST) .................................................................................................. 1

29

30

31

32

00-478034-00002 Cover – Bottom .......................................................................................................................... 1

00-478452

SD-036-39

SD-038-16

Chute – Load Cell Access .......................................................................................................... 1


8

Self-Tapping Screw 6-32 x 3

Truss Hd., Type TT ................................................................... 4

/

8


F-43081 Rev. D (September 2010) - 38 -



00-478280-1 Harness - Wiring



PL-57092

2712

2712C

2712PHS

ML-134235

ML-134237

ML-134238

WIRING HARNESS

(2712 SERIES)

- 39 -





(2812, ML-134239, 2812C, ML-134244, 2812PS, ML-134241, & 2812CB, ML-136141)


(With Auto Shutoff And Gauge Reset)

(2812, ML-136110 & 2812PS, ML-136114)

00-477797-1 Harness - Wiring (2812PS)

00-478352 Harness - Wiring (2812PS)

00-477683 Harness - Cable Display

(2812PS, ML-134241)

WIRING HARNESS

(2812 & 2812PS SERIES)

F-43081 Rev. D (September 2010) - 40 -


PL-57697


HOME SWITCH

GAUGE PATH

PILOT LIGHT

START/STOP

SWITCH

00-873639 Harness - Wire Upper 00-873640 Harness - Wire Lower

PL-57696

WIRING HARNESS

(2912, ML-136111 & ML-136113 & 2912B, ML-134251)

- 41 -




00-873726-1 Harness - Wiring Lower (With Auto Shutoff)

00-873551-1 Harness - Wiring Top (With Auto Shutoff)

00-873725-1 Harness - Wiring Lower (Without Auto Shutoff)

PL-57107

00-873550-1 Harness - Wiring Top (Without Auto Shutoff)

WIRING HARNESS

(2912, ML-134245, ML-136111, ML-136113, & 2912C, ML-134248)

F-43081 Rev. D (September 2010) - 42 -



00-479783 Harness - Cable Display

00-873785-1 Harness - Auto/Manual Switch

00-479785-1 Harness - Upper Wiring

00-873779-1 Harness - Lower Wiring

00-479786-1 Harness - Power Input

00-479784-1 Harness - Scale/Control Board

WIRING HARNESS

(2912PS, ML-134247)

PL-57105

- 43 -




FORM 43081 Rev. D SEPTEMBER 2010


PRINTED IN U.S.A.

Online Parts Catalog

Note: It is helpful, but not essential to know the ML (Material List) Number of the equipment for which a part is needed

Section 1 – If Equipment ML Number is known

Section 2 – If Equipment ML Number is not known


From hobartservice.com

select

PARTS

Next select

SMARTPARTS

Web Browser Pop-up blocker must be turned off for this site in order for SmartParts to operate


This is SmartParts home page

If the ML Number of the Equipment is known , select

Use SmartParts Now

(We’ll explain what to do if the ML number of the Equipment is not known in Section 2)

104352

Enter the ML number and click on

Search SmartParts

104352

For this example, the part needed is a Water

Pressure Gauge used on the LX 30 Undercounter

Dishwasher

The ML number of this dishwasher is 104352


•

Click on the

Radio button to select the

Parts Catalog

Then click on

Continue

The Water Pressure Gauge is on the Base Assembly

Select Base Assembly

Then click on Continue


Select an appropriate figure size

•

19: Gauge – Water Pressure (LX30/40, LXG, & LXiG Series)

Locate the part needed (Water

Pressure Gauge) on the drawing

Placing the cursor on the number will display the Description of the

Part

Click on the number pointing to the part


• Selecting the part on the figure causes the part to be highlighted on the parts list

• Click on the Add button to add the part to the shopping cart

• You can add more parts or change the quantity of the parts already in the cart

• When finished, click on the Confirm Parts Selected and then on Print Parts List if you want to print

Use

SMARTPARTS

Now


This (again) is SmartParts home page

For this example, the part needed is a Water

Pressure Gauge used on the LX 30 Undercounter

Dishwasher

If the ML Number of the

Equipment is not known , click on the Radio button to select Warewash /

Waste Equipment


(Go to Section 1 if you do know the ML number of the

Equipment)


Click on the Radio button to select UnderCounter

Dishwasher

Then click on

Continue

Click on the Radio button to select LX Series

Dishwashers

Then click on

Continue


The Water Pressure Gauge is on the Base Assembly

Select Base Assembly


Select an appropriate figure size

19: Gauge – Water Pressure (LX30/40, LXG, & LXiG Series)

Locate the part needed (Water

Pressure Gauge) on the drawing

Placing the cursor on the number will display the

Description of the Part

Click on the number pointing to the part


• Selecting the part on the figure causes the part to be highlighted on the parts list

• Click on the Add button to add the part to the shopping cart

• You can add more parts or change the quantity of the parts already in the cart

• When finished, click on the Confirm Parts Selected and then on Print Parts List if you want to print

Use

SMARTPARTS

Now


2912 SLICERS

JANUARY 2011

PRODUCT SERVICE DEPARTMENT TROY, OH. 45374-0001

RECOMMENDED SPARE PARTS LIST

2912 SLICER

Qty Part Number Description

2 BB-021-66 BALL BEARING

1 438845 BELT

1

2

1

1

1

1

1

1

1

1

1

1

1

70487-26

117542-95

438846-1

439870-5

271612-2

439691

478747

87711-349

87711-349

479708

873230

479531

87711-319

CAPACITOR, START CAP

CORD AND PLUG ASSY 115V

KNIFE MOTOR 115V

KNIFE, PACKAGED

START SWITCH, ESS

STONE SERVICE KIT

STONE, TRUING

SWITCH, GUAGE PLATE

SWITCH, ON/OFF

BOARD, CONTROL BOARD

I,ASSY KIT POTEN

MOTOR, AUTO 1/8 HP 90VDC

SWITCH, HOME


No results