advertisement
Copyright © 2021 VARO
POWX1770 EN
APPLICATION ................................................................................ 3
DESCRIPTION (FIG A) ................................................................... 3
PACKAGE CONTENT LIST ............................................................ 3
SYMBOLS ....................................................................................... 3
GENERAL POWER TOOL SAFETY WARNINGS ......................... 4
ADDITIONAL SAFETY INSTRUCTIONS FOR COMPRESSORS . 5
OPERATING INSTRUCTIONS ....................................................... 6
CLEANING AND MAINTENANCE ................................................. 7
TROUBLE-SHOOTING ................................................................... 9
TECHNICAL DETAILS .................................................................... 9
P a g e | 1 www.varo.com
POWX1770 EN
WARRANTY .................................................................................. 10
ENVIRONMENT ............................................................................ 10
Copyright © 2021 VARO P a g e | 2 www.varo.com
POWX1770
COMPRESSOR 2200W – 3PK – 50L - OIL
POWX1770
1 APPLICATION
Your compressor has been designed to supply compressed air. It is not designed for commercial use.
EN
WARNING! Read this manual and general safety instructions carefully before using the appliance, for your own safety. Your power tool should only be passed on together with these instructions.
2 DESCRIPTION (FIG A)
1. Handle
2. Air hose connection
3. Wheel
4. Tank
5. Pressure control
6. On/off switch
7. Safety valve
8. Tank pressure
9. Outlet pressure
10. Air filter
11. Oil cap
12. Gauge glass
13. Water outlet valve
14. Thermal safety
3 PACKAGE CONTENT LIST
Remove all packaging materials.
Remove remaining packing and package inserts (if included).
Check that the package contents are complete.
Check the appliance, the power cord, the power plug and all accessories for transportation damage.
Keep the packing materials as far as possible till the end of the warranty period. Dispose it into your local waste disposal system afterwards.
1 x compressor
1 x Manual
Wheels
Feet
Screws
WARNING: Packaging materials are not toys! Children must not play with plastic bags! Danger of suffocation!
Bolts
Filters
Safety valve
Tank certificates
If any parts are missing or damaged, please contact your dealer.
4 SYMBOLS
In this manual and/or on the machine the following symbols are used:
Denotes risk of personal injury or damage to the tool.
Warning: hot surfaces!
Risk for automatic start-up. Read manual before use
Copyright © 2021 VARO P a g e | 3 www.varo.com
In accordance with essential requirements of the European directive(s)
POWX1770
Dangerous voltage!
EN
Wear eye protection
Wearing of protective shoes advised
The jet must not be directed at persons, pets, live electrical equipment or the appliance itself.
Keep the area of operation clear of all persons and pets
5 GENERAL POWER TOOL SAFETY WARNINGS
Read all safety warnings and instructions. Failure to heed warnings and follow instructions may result in electric shock, fire and/or serious injury. Keep safety warnings and instructions for future reference. The term "power tool" in the safety warnings refers to your mains- operated (corded) power tool or battery- operated (cordless) power tool.
5.1 Working area
Keep working area clean and well lit. Untidy and dark areas can lead to accidents.
Do not operate power tools in potentially explosive surroundings, for example, in the presence of inflammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
Keep children and bystanders at a distance when operating a power tool. Distractions can cause you to lose control of it.
5.2 Electrical safety
Always check that the power supply corresponds to the voltage on the rating plate.
Power tool plugs must match the outlet. Never modify the plug in any way. Do not use adapter plugs with earthed power tools. Unmodified plugs and matching outlets will reduce the risk of an electric shock.
Avoid body contact with earthed surfaces such as pipes, radiators, kitchen ranges and refrigerators. There is an increased risk of an electric shock if your body is earthed.
Do not expose power tools to rain or wet conditions. If water gets inside a power tool, it will increase the risk of an electric shock.
Do not damage the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep the cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of an electric shock.
When operating a power tool outdoors, use an extension cable suitable for outdoor use.
Using a cord suitable for outdoor use reduces the risk of an electric shock.
If operating a power tool in a damp location is unavoidable, use a power supply protected by a residual current device (RCD). Using an RCD reduces the risk of an electric shock.
5.3 Personal safety
Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool when you are tired or under the influence of drugs, alcohol or medication. A moment of inattention when operating a power tool may result in serious personal injury.
Use safety equipment. Always wear eye protection. Using safety equipment such as a dust mask, non-skid safety shoes, a hard hat, or hearing protection whenever it is needed will reduce the risk of personal injury.
Copyright © 2021 VARO P a g e | 4 www.varo.com
POWX1770 EN
Avoid accidental starts. Ensure the switch is in the off position before inserting the plug.
Carrying power tools with your finger on the switch or plugging in power tools when the switch is in the on position makes accidents more likely.
Remove any adjusting keys or spanners before turning on the power tool. A spanner or key left attached to a rotating part of the power tool may result in personal injury.
Do not reach out too far. Keep your feet firmly on the ground at all times. This will enable you retain control over the power tool in unexpected situations.
Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from the power tool. Loose clothes, jewellery or long hair can become entangled in the moving parts.
If there are devices for connecting dust extraction and collection facilities, please ensure that they are attached and used correctly. Using such devices can reduce dust-related hazards.
5.4 Power tool use and care
Do not expect the power tool to do more than it can. Use the correct power tool for what you want to do. A power tool will achieve better results and be safer if used in the context for which it was designed.
Do not use the power tool if the switch cannot turn it on and off. A power tool with a broken switch is dangerous and must be repaired.
Disconnect the plug from the power source before making adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
Store power tools, when not in use, out of the reach of children and do not allow people who are not familiar with the power tool or these instructions to operate it. Power tools are potentially dangerous in the hands of untrained users.
Maintain power tools. Check for misalignment or jammed moving parts, breakages or any other feature that might affect the operation of the power tool. If it is damaged, the power tool must be repaired. Many accidents are caused by using poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to jam and are easier to control.
Use the power tool, accessories and cutting tools, etc., in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work which needs to be done. Using a power tool in ways for which it was not intended can lead to potentially hazardous situations.
5.5 Service
Your power tool should be serviced by a qualified specialist using only standard spare parts. This will ensure that it meets the required safety standards.
6 ADDITIONAL SAFETY INSTRUCTIONS FOR COMPRESSORS
Be cautious when using compressed air. Never aim the air flow at people or animate, preferably wear safety glasses. Do not use compressed air to dean clothing.
Compressed air is not suitable to inhale.
Do not exceed the maximum operating pressure.
Do not perform any adjustments to the machine because of which the maximum operating pressure may be exceeded.
Never exceed the maximum allowed pressure of the equipment to be connected or the items to be inflated with this machine.
Do not use the machine in an ambient temperature below 5 °C.
Only use the machine outside in dry, well-ventilated surroundings. If the machine is used for the spraying of inflammable substances, place the machine upwind and at a safe distance.
Copyright © 2021 VARO P a g e | 5 www.varo.com
POWX1770 EN
Only move the machine by lifting the handle. Never pull an attached air hose to move the machine.
The working parts of the machine can become hot during operation. Let the machine cool down after use.
The machine is equipped with a thermal safety system
Never use gasoline or other flammable liquids to dean the too. Vapours in the tool can be ignited by a spark and cause the tool to explode.
If the tank leaks, switch off the machine immediately. Have the machine repaired by an authorized technician.
Make sure that the machine is switched off and unplugged and that the tank is pressure free before troubleshooting or servicing, or when the machine is not used.
After each use the tank must be vented and the moisture collected in the tank must be bled. Not bleeding the tank can lead to leakage and may cause a dangerous situation.
Keep this manual with your compressor.
6.1 Extension cords:
We don not recommend the use of an extension cord with this product as this may result in the loss of power and overheating of the motor. An additional air hose should be used instead of an extension cord. Improper use of extension cords may cause inefficient operation of tool, which can result an overheating. Be sure your extension cord is rated to allow sufficient flow to motor. Use of an extension cord heavy enough to carry the current the tool will draw is very important. Especially when the power source is of great distance. An extension cord that is insufficient will cause a drop in line voltage, resulting in not starting, power loss and causing the motor to overheat.
7 OPERATING INSTRUCTIONS
7.1 Instructions before use.
After removing the compressor from its packaging and if you are certain that it is in perfect condition, then you can carry out the following operations:
Assemble the supplied wheels.
Plastic caps at the side of the pumps, must be replaced by the supplied air filters
You have to remove the oil cap and add oil before starting
7.2 Connecting and removing the air hose
The machine has been provided with quick couplings for the attachment of 1 air hose.
Press the connecting piece of the air hose into the connection.
Check whether the air hose is connected properly.
To remove an air hose, proceed as follows:
Press the connecting piece of the air hose further into the connection.
Pull the collar on the connection backward.
Pull out the connecting piece from the connection.
Release the collar
Before connecting or removing an air hose, always pull the plug from the power supply.
7.3 Setting the operating pressure
The set operating pressure can be read from the gauge.
Turn the adjusting knob to the right to increase the operating pressure.
Turn the adjusting knob to the left to reduce the operating pressure.
Copyright © 2021 VARO P a g e | 6 www.varo.com
POWX1770
Never exceed the maximum operating pressure of the equipment connected.
7.4 Instructions for use
Check if the tank is vented and bled.
Check the oil-level.
Check the operation of the safety valve.
Check whether the air hose is connected properly.
Switch on the machine and allow the pressure in the tank to build up.
As soon as the tank pressure is built up, the motor switches off automatically.
The motor switches automatically on as soon as the tank pressure becomes too low.
After use, switch off the machine. Vent the tank and bleed the moisture collected in the tank.
7.5 Switching on and off
EN
To switch on the machine, pull the on/off switch.
To switch off the machine, press the on/ off switch.
8 CLEANING AND MAINTENANCE
Clean the outside of the machine with a moist cloth.
Regularly check the machine for possible damages and leakage.
8.1 Venting and bleeding the tank
After each use the tank must be vented and the moist collected in the tank must be drained.
Turn the machine backwards to gain access to the water outlet valve.
Loosen the screw carefully in such a way that the tank is vented fluently.
Turn the machine forward en let the moist flow from the tank. Move the tank a few times so that all moist can flow from the tank.
Tighten the screw securely.
Always make sure that all the moist has been drained from the tank. Never fully close the water outlet valve if you leave the machine in an area colder than 0 °C.
8.2 Changing the oil
The oil in the pump must be changed after the first 50 operating hours, and then after every
200 hours or 3 months,
Copyright © 2021 VARO P a g e | 7 www.varo.com
POWX1770 EN
Place a receiving bin under the gauge glass.
Remove the plug from the filling-point.
Remove the screw from the gauge glass.
Turn the machine slightly backwards to remove all oil.
Re-insert the screw and tighten it securely.
Fill the pump housing with standard compressor oil until the level is equal to the dot on the gauge glass.
Replace the plug.
8.3 Checking the oil-level
Check the oil-level prior to each use.
The level must be equal to the red dot on the gauge glass.
If the level is below the mark, refill the oil.
8.4 Checking the safety valve
Check the operation of the safety valve prior to each use.
Make sure that the tank is pressure free. The pressure gauge must indicate 0 bar.
Pull the ring a number of times. The pin should move freely.
Do not use the machine if the pin in the safety valve cannot move freely. Do not perform any adjustments to the safety valve.
8.5 Thermal Safety
The machine shuts off automatically in the event of overheating or overload
Wait a few minutes to allow the machine to cool
Later, you can push the button to begin again
Copyright © 2021 VARO P a g e | 8 www.varo.com
8.6 Checking and cleaning the air filter
Check the air filter every 3 months.
POWX1770 EN
Let the machine cool down.
Pull the air filter cap from the filter.
Clean the filter with dry air. If necessary replace the filter.
Pull the air filter cap back into the filter.
9 TROUBLE-SHOOTING
If the machine does not work correctly, follow the directions below to solve the problem. If you can’t solve the problem yourself, contact your dealer.
9.1 Engine does not start
Check that the on/off switch is in the "ON" position.
Check that the power supply corresponds to the voltage on the rating plate of the machine.
Check that the fuses in the meter cupboard are intact.
Check that no extension cords are used that do not comply with the applicable regulations.
Check that the work environment is not too cold.
9.2 Compressor does not supply air
Check that the pressure regulator is adjusted correctly.
9.3 Pressure is too high
Check if the hose is connected to the correct valve.
Re-adjust the pressure.
10 TECHNICAL DETAILS
Rated voltage
Rated frequency
Rated Power
Rotation speed
Rated Pressure
Tank capacity
Air debit (capacity)
Weight
Cylinder
Lubricated
220-240 V~
50 Hz
2200 W / 3 pk
2800 min-1
9 bar / 131 PSI
50 l
356 l/min
45 kg
2
Yes
11 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA 75 dB(A)
Acoustic power level LwA 97 dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85 dB(A).
Copyright © 2021 VARO P a g e | 9 www.varo.com
POWX1770 EN
12 WARRANTY
This product is warranted for a 36-month period effective from the date of purchase by the first user.
This warranty covers all material or production flaws excluding : batteries, chargers, defective parts subject to normal wear & tear such as bearings, brushes, cables, and plugs, or accessories such as drills, drill bits, saw blades, etc. ; damage or defects resulting from maltreatment, accidents or alterations; nor the cost of transportation.
Damage and/or defects resulting from inappropriate use also do not fall under the warranty provisions.
We also disclaim all liability for any bodily injury resulting from inappropriate use of the tool.
Repairs may only be carried out by an authorized customer service center for Powerplus tools.
You can always obtain more information at the number 00 32 3 292 92 90.
Any transportation costs shall always be borne by the customer, unless agreed otherwise in writing.
At the same time, no claim can be made on the warranty if the damage of the device is the result of negligent maintenance or overload.
Definitely excluded from the warranty is damage resulting from fluid permeation, excessive dust penetration, intentional damage (on purpose or by gross carelessness), inappropriate usage (use for purposes for which the device is not suitable), incompetent usage (e.g. not following the instructions given in the manual), inexpert assembly, lightning strike, erroneus net voltage. This list is not exhaustive.
Acceptance of claims under warranty can never lead to the prolongation of the warranty period nor commencement of a new warranty period in case of a device replacement.
Devices or parts which are replaced under the warranty therefore remain the property of
Varo NV.
We reserve the right to reject a claim whenever the purchase cannot be verified or when it is clear that the product has not been properly maintained. (Clean ventilation slots, carbon brushes serviced regularly, etc.).
Your purchase receipt must be kept as proof of date of purchase.
Your appliance must be returned undismantled to your dealer in an acceptably clean state,
(in its original blow-moulded case if applicable to the unit), accompanied by proof of purchase.
13 ENVIRONMENT
Should your appliance need replacement after extended use, do not dispose of it with the household refuse, but in an environmentally safe way.
Waste produced by electrical machine items should not be handled like normal household rubbish. Please recycle where recycle facilities exist. Check with your
Local Authority or retailer for recycling advice.
Copyright © 2021 VARO P a g e | 10 www.varo.com
advertisement
Related manuals
advertisement