TFT wide-screen

TV

With TV tuner

Clock function

X-VIEW

Auto

Display

C-TV7020

C- TV 70 20

USER MANUAL

Thank you for your purchasing LCD monitor. Please read this manual carefully before operating and reserve it for future reference. It will be helpful to you if you encounter any operational problem.

1 .

Appearance and function

1

8

6

7

4

5

2

3

Noted: This product is for touch influence type button. More convenient for operation. Just touch the button, the button indicator light will flicker; The unit can adjust to the picture which you need for

TV antenna

12

1) .

2 ) .

9 10 11

POWER: Power on or off

TV/AV: Display mode switch adjustment reduce.

3).

VOL+: Volume or MENU adjustment increase

4) .

VOL-: Volume or MENU

5) .

MENU: Menu adjustment

6) .CH+:On TV for next channelchoose

, On MENU for submenu choose

7 ).

CH-: On TV for previous channel choose, On MENU for submenu choose

8 ).

Remote control window .

9 ) .

Power jack

10 ).

Earphone jack

11 ) .

AV signal input jack

12 ).

ANT signal input

01

2 .

Specification

Name: 7” TFT LCD Monitor with TV

Resolution:480x3(RGB)x234

System: ： PAL/NTSC

Power:DC+12V ±10%

Power consumption: 8W

Signal: AV+TV

Screen size ： 7” （ 16 ： 9 ）

Remote control: full function remote control within 6m.

3 .

Operation instruction

1 .

Please connect the one side of AV cable to the signal source. The another side of AV cable connect to the monitor.

Yellow jack connect to the video signal, red and white jack connect to the audio output.

2. When use in house, please use the 12Vhome adaptor connect to power. If use in car, please connect with car adaptor. Then turn On the power button on unit.

3. It will be auto identify for the PAL system and NTSC system.

If the connection is correct it will be show the picture with clearly and colorful.

4. Can adjust the MENU button on monitor to adjust the brightness , color , contrast mode to reach to the best effect. Also can through the remote control to adjust the menu.

4 .

Main unit and parts connection

（ Jack on bottom of unit ）

Car power cable

Noted: When you operation the unit in the car, please use the car power adaptor to connect with the unit. The connection method is same as the home adaptor.

02

（ Jack on bottom of unit ）

AV input connection

Please connect the AV signal inputaccording to the picture showing. After connection, then setting the unit in AV mode, then will display the clearly picture.

（

Jack on bottom of unit

）

03

5. Operating Instructions

Turn on the unit, then press “AV/TV” to choose the display mode.

AV MODE

If connect to the VCD or DVD correctly, then will show picture normally. If not connect to the VCD, DVD or no signal, then will be show the character of AV on the top left corner, and also show “no signal”

1. Picture setting

1.1 Bright

1.2 Contrast

1.3 Color

Press the “AV/TV ” button on unit ,or “CH+ , CH-“ on remote control to choose adjusted item. Then press “CH+ , CH-“ button on unit or “V+ , V-“ on remote control to adjust the picture effect.

2. Audio setting

Volume adjustment

Press “vol+””vol-“on unit or “v+ , v-“ on remote control to adjust the volume.

3. Function setting

3.1

3.2 zoom

3.3 language

3.4 Input

Press “CH+” “ CH-” on the unit or remote control to choose the different function that you need to switch. Then Press

“VOL+,VOL-“ button on unit or “V+” “ V- ” to adjust that you need.

4. System setting

1). S-roloc

Press “v+” “ v- ” on the unit or remote control to choose the auto ,pal ,nest,secam system that you need to adjusting.

5. Clock

5.1 Sleep

5.2 Time

5.3 Off-time

5.4 On-time

04

Press “ch+ , ch-“ on remote control to choose adjusted item. Then press “vol+,vol-“button on unit or “v+ , v-“ on remote control to adjust the time.( note: under non-setting time situation , don't adjust the unit time on or off.)

TV MODE

If you have choose the TV mode, and connected the TV signal, then will show picture normally. If not connect to the TV or no signal, then will be show “no signal”.

Press “ MENU “ button on unit or remote control to enter the main menu, then to setting the picture ,sound , function , system ,preset and time.

1. Picture setting

1.1 Bright

1.2 Contrast

1.3 Color

Press the “AV/TV” button on unit ,or “CH+ , CH-“ on remote control to choose adjusted item. Then press “VOL+,VOL-““

button on unit or “V+ , V-“ on remote control to adjust the picture effect.

2. Audio setting

Volume

Press “vol+,vol-“ on unit or “v+ , v-“ on remote control to adjust the volume.

3. Function setting

3.1

3.2 Zoom

3.3 Language

3.4 Input

Press “CH+” “ CH-” on the unit or remote control to choose the different function that you need to switch. Then Press

“VOL+,VOL-“ button on unit or “V+” “ V- ” to adjust that you need.

4 ． System setting

4.1 S-roloc (auto, pal, ntsc) (secam as option )

4.2 S-sys (dk, i, m, bg ) (l as option)

4 .

3 swap

4 .

4 copy

Press “ch+ , ch-“ on remote control to choose adjusted item.

Then press “vol+,vol-“ button on unit or “v+ , v-“ on remote control to switch pal,ntsc,secam system.

05

5. Preset

5.1 Auto-search

5.2 search

5.3 Fine

5.4 Skip

Press “CH+ , CH-“ on remote control to choose adjusted item. Then press “VOL+,VOL-“ button on unit or “V+ , V-“ on remote control to adjust what you need.

6. Clock

6.1 sleep

6.2 time

6.3 off-time

6.4 on-time

Press “CH+ , CH-“ on remote control to choose adjusted item. Then press “VOL+,VOL-“ button on unit or “V+ , V-“ on remote control to adjust the time.( NOTE: Under nonsetting time situation , don't adjust the unit time on or off.)

6 .

Using remote control unit

1).power: switch ON/OFF power.

2).Mute: press this button, the sound disappear, then press V+ or Vto restore to normal.

1

3).TV/AV: Select channel(TV)AV output.

4).0-9,-/--:Select channel program. when the

2

3 channel number is one digit, press the correspondent number. when the channel number is two or three digit ,press-/-- key,which the screen will show two or three light bars, and

4 then enter into the correspondent numbers.

5) .

V+/-:Press these two button to increase and reduce volume, it is also used for adjusting and confirming menu.

6) CH+/-:Press these two buttons to increase or decrease channel number, and also control the submenu up and down when adjusting menu.

7) Menu: Press it to enter into or close from menu.

8) Mode : Standard, Brightness, Colorful, Softness, Choice

5

6

7

5

6

8

06

Replacing the batter

1

.

2

.

3 .

7 .

Attention

1. Be sure to distinguish the anode and the cathode when connect the power.

2. Keep this machine away from too hot, or under effect of moisture, dust or oil smoke, avoid this machine from dropping or impacting, never extrude or chafe this machine with sharp objects.

3. Dangerous high voltages are present inside the enclosure. Do not open the cabinet, Refer servicing to qualified personnel only.

4. A few high lights or dark spots may occur on the LCD screen. It is a very common phenomenon to the active matrix display technology, and never necessary means any defects or faults.

07

SIMPLE TROUBLE-SHOOTING GUIDE

Please check the following faults before sending your units for repairs.

Symptom Probable Cause Solution

Black Screen

NO picture

color picture

1.No12 voltage

2.Brightness or contrast ratio is too small

3.no high-voltage

1 .check the power is on or

connect rightly

2. check the A/V Cable

is loose or not

3. Increase the brightness

and contrast ratio

1.No sources output

2.The video concentric plug

becomes loose

1.Check the output of VCD

or DVD

2.Replace with the A/Vcable

3.Tighten the Video input cable

1 Video sources have no output

2.Color ratio should be

re-adjust

1.check the video sources

2.Enter into the Menu to re-adjust

With a little regular light spots and color spots on the screen or black horizontal line in the picture

It is normal symptom in the

active matrix display

technology.

it is normal symptom in view range with a little regular light spots on display screen.

Unclear picture

1.Poor quality of the video sources

2.Bright &Contrast

1.Replace with the high quality videodisc

2.Reset Bright &contrast.

The outer cover of the monitor has been deformed

1.External temperature is too high.

2.The power has not been switched off for a long time.

1.The surround temperature should not exceed to 0-60 degrees.

2.Turn off the power after using the unit.

ALARM

For your safety, driver are advised not to watch the display when driving.

It's prohibited in law of some countries when driving and operating to watched displayer.

08