Magellan RoadMate 1400 - Automotive GPS Receiver Reference Card
PDF
Dokumentti
Mainos
Mainos
Magellan RoadMate 1400 Check the Contents... D D D D D D Magellan@ RoadMate™ 1400 Adjustable Mount Basic Cradle Adhesive Mounting Disk Vehicle Power Adapter Cable User Manual CD-ROM The Magellan RoadMate has an internal battery that may need to be charged the first time it is used. The battery will begin charging as soon as power is supplied to the Magellan RoadMate through the vehicle power receptacle. (When the light on the vehicle power adapter illuminates, it is properly connected to 12 VDC. Note some vehicles require that the ignition be on before power is delivered to the vehicle power receptacle.) Register your Magellan RoadMate at www.magellangps.comlto keep updated on latest offers and accessories. © 2008 Magellan Navigation, Inc. All rights reserved. The Magellan logo, Magellan, and Magellan RoadMate are trademarks of Magellan Navigation, Inc. 2 InstalL.. Turn it on and go... Clean the area where the adjustable mount will be installed with an alcohol pad. If you are using the adhesive disk apply it firmly to a flat, smooth area or the dash. (Allow to cure for 24 hours.) See the User Manual on the CD-ROM for additional information on installation. Some areas have laws restricting the mounting of any devices on the windshield. Be sure to check your local laws before mounting the Magellan RoadMate to the windshield. Please note: Accessories shown here may differ slightly from the accessories provided with your Magellan RoadMate. Snap the adjustable mount into the cradle. Attach the mount to the windshield or the adhesive disk. Signal Reception For best signal reception, leave the garage or parking structure to get a clear view of the sky. Check the satell ite status ind icator in the upper right corner of the Map screen for signal strength. When the icon bars are green, the Magellan RoadMate is computing position information. .1 I Attach the Magellan RoadMate to the basic cradle. Residents of Hawaii and Puerto Rico Plug one end of the vehicle power adapter to USB connector on the Magellan RoadMate and the other in a vehicle power receptacle. To use the Magellan RoadMate in Hawaii or Puerto Rico you will need to select the proper map region. Region selection can be found by accessing the Main Menu and tapping User Options and then Region. See the User Manual for more detai Is on changing regions. Thank you for your purchase of the Magellan RoadMate 1400 Please do not return this product to the place of purchase without first contacting Magellan Technical Support at www.magellanGPS.com/supportl. For questions on using the Magellan RoadMate 1400, please refer to the reference card or the CD-ROM supplied with this product. If you are still unable to answer your question, check our technical support web page at: http://www.magellanGPS.com/supportl _Magellan® RoadMate™ 1400 Reference Card Keep this Reference Card handy in your glove box for quick reference to the basic operation of the Magellan RoadMate. ~ • On I Off Button r..,...._.....- -_-_-_-_-_-_-_-_-_-..::c:!!!::A:GE:LLA~~~::::-:'-:'-=--=--:'-:' ......~-" rr===============;'\ • Reset MaRilla" RoadMate r SD I MMC Card Slot © 2008 Magellan Navigation, Inc. All rights reserved. The Magellan logo, QuickSpell, Magellan, and Magellan RoadMate are trademarks of Magellan Navigation, Inc. Map Screen Details Main Menu ~---"""A . Falrplex Dr ========"'''"!!!W~UUU'!!,;>~ L ollrptf. or , "'::';~:=:::::;.l.BflIPlUe Ave ~ ~~ a....;;~ View Map Screen Create a route to an address Create a route with multiple destinations Search for POls on approaching off-ramps Create a route to a point of interest Select user options Route to home address Accesses Current location Screen Main Menu (while routing) ~~I.o..Blvd Fin: 0.6 mi ell""".: 13 rJj A Current street name. B Direction of travel. Tap to display Locate screen. C D E Zoom out. F Return to Map Screen Search for POls on approaching offramps Cancel existing route J Map scale. (Displays briefly when zoom levels are changed.) Turn instructions for next manuever. Tap to display maneuver list. (available only when routing) Current time. While routing, displays distance to next maneuver and if tapped, repeats last manuever. G Access Main Menu. H Present speed. While routing, displays distance of route, time remaining on the route or estimated time of arrival. Detour on existing route J K Accesses Current location Screen L Street name for next maneuver. (available only when routing) Volume control Zoom in. Satellite Status. Tap to display additional satellite information. Reading the information bar air lex ~ ..... Right turn in 2.3 miles on Fairplex Dr. Will arrive at final destination in 3.6 miles. 3.6mi Routing to an Address by City Satellite Signals Ent« Address 4 bars green: Strong signal Blank: No satellite signals. Unable to compute position. Keypad: Type in the first ~ few characters of the city. Tap on the satellite status icon to get a visual representation of the satellites and signal strength. GPS Slatu. / / Select City Name San Dl,go, CA San Diego, TX San OJmas, CA For detailed GPS information, access the MFG GPS Status screen. Main Menu> User Options> GPS Options> GPS Status Seltct Str.ft Nam. 1i~im· b Keypad: Enter the street ~ name. You donot need to add direction prefixes (N, E, W, S, etc.) but you can if desired to limit the number of streets displayed. 700·799 Tips on improving satellite signal strength ... Leave the garage or parking structure so the GPS receiver has a clear view of the sky. ... Move away from large structures or overhanging trees that may interfere with satellite reception. ... You may need to relocate the Magellan RoadMate in your vehicle to have a better view of the sky. This receiver may not be able to get satellite signals while indoors. If you are not getting strong satellite signals, go outside and follow the tips provided above. The Map screen will be displayed and you will be provided routing instructions. Please refer to the User Manual on the CD-ROM for more information on using the keypad and the QuickSpell® feature of the Magellan Road Mate. User Options. System Setting.s _ = Exit POls Planner EXit POls can be accessed ONLY while travelling on a freeway. If you try to use Exit POls while not on a freeway, a warning Will be displayed Indicating that It IS not available. Exit (mil s.!tctfJit 0.' II. II. 2' fl. 01 Volume: Tap 'Mute' to turn the speaker on or off. -+ Trip Name Tap on the slider bar to change the speaker volume. A Brightness: Tap on the sl ider bar to change the display brightness. Select 'On-battery dimming (75%)' to conserve battery life while not connected to external power. o 'Daylight Savings' when applicable to your area. (Note: the Magellan RoadMate does not automatically change the daylight savings setting.) ~._. I 't' Use Address, Address Book,POls or Intersection to select destination. Add address to Trip . . 47')] U London Avp Chicago, II w • 'Kilometers/Meters' to assign the units of measure. ~~ ...... Repeat New Trip: POOL5_THURS IchtfJ.1I1l1' ~m Idll 1111011110111011 Units of Measure: Select either' Miles/Feet' or + Q Power: Select the duration that the receiver will turn off if not moving or the touchscreen is not touched. Time Zone: Choose your local time zone. Select p ~------, 4752 N london Ave ChiCigo .. The Magellan RoadMate takes the upcoming exits and computes which restaurants, gas stations, and hotels are near the exit. If there are no POls for a category near the exit, the icon for that category will not be shown. Tap on the icon for the category and the exit you want to use: "0311' 610Wlanl\.lAYf ~ .... " Gas stations at 0.2 mi exit System Status where you can view product information or run diagnostics. _ I lJOQ.,..,lVI ... ~o.m..~("Io:w System Status: Tap the' Next' button to access the 605-0139-001 A I!!I I!!I 0 ~ IllI '>48WAr,owllWy \.-Olnw\,f....lI .. ClCNY:l~O'»OJ ...... """ ......' Food at 0.2 mi exit Tapping on a POI in the list brings up the Route Method screen. To create a route to the POI chosen, tap on the orange "Calculate Route" icon. Use the 'Guide Me' button to access this trip. Current Location Current location Routing to a POI Select Sub category Select category It Moon food 00 American Food II • -+1 South American Food Australian Food ;I (if subcategories are available) I Amfric.an t OOml A B Current street or highway and current city. Next and previous exit or intersection from your current location. 1')000 II Ai/porI Dr -+ ~(o"!>d~~~___ _ '180 l}lJl 20m __ Ll!ft Stilt Restaurant Chili Etc Jillys AmMcan Gril C Latitude and Longitude for your current position. D Time and Date. E Save button to quickly store your location into your address book F Speedometer. G Compass and elevation. Please refer to the User Manual on the CD-ROM for more information on routing to POls. Magellan® RoadMate™ 1400 User Manual Magellan Navigation, Inc. 960 Overland Court, San Dimas, CA 91773 IMPORTANT SAFETY WARNINGS The Magellan RoadMate is a vehicle-navigation aid designed to assist you in arriving to your selected destinations. When using the Magellan RoadMate, these safety rules must be followed to prevent accidents that can result in injury or death to yourself or others: • • • • • • • California and Minnesota law prohibits mounting any item to your windshield. Please check with your state or local law enforcement for applicable regulations regarding windshield mounting. Go to www.magellanGPS.com for alternate mounting solutions. An adhesive disk is supplied with the Magellan RoadMate for use as an alternate mounting solution to the dashboard. When driving, the need to view the display is minimal. The driver should enter data or program the Magellan RoadMate only when the vehicle is stopped. Only a vehicle passenger should enter data or program the Magellan RoadMate while the vehicle is moving. It is your responsibility to comply with all traffic laws. Every attempt is made to ensure that the database is accurate. However, roadways, points of interest (POIs), and business and service locations may change over time. The database does not include, analyze, process, consider, or reflect any of the following: legal restrictions (such as vehicular type, weight, height, width, load and speed restrictions); road slope or grade; bridge height, width, weight, or other limits; population density; neighborhood quality or safety; availability or proximity of law enforcement, emergency rescue, medical, or other assistance; construction work zones or hazards; road or lane closures; road, traffic, or traffic facilities’ safety or condition; weather conditions; pavement characteristics or conditions; special events; traffic congestion. It is your responsibility to disregard any unsafe, hazardous, or illegal route suggestions. Keep the Magellan RoadMate safe from extreme temperature conditions. For example, do not leave it exposed to direct sunlight for an extended period of time. Take care when mounting the Magellan RoadMate in your vehicle, whether using the windshield mount or other mounting accessories, that it does not obstruct the driver's view of the road, interfere with the operation of the vehicle's safety devices such as air bags, or present a hazard to occupants of the vehicle should the Magellan RoadMate be dislodged while driving. You assume the risks associated with damage to your vehicle or vehicle occupants as the result of your choices in mounting the Magellan RoadMate. The battery in the Magellan RoadMate is rechargeable and should not be removed. In the event it should need to be replaced, please contact Magellan Technical Support. About Charging the Magellan RoadMate • • • • An optional AC adapter is available as an accessory for your Magellan RoadMate. Use of another type of AC adapter can result in malfunction and/or possible fire hazard due to battery over heating. Use only the vehicle power cable approved for / supplied with your Magellan RoadMate. Use of another type of vehicle power cable will result in malfunction and/or damage to the receiver. For safety reasons, the battery in your Magellan RoadMate will stop charging when the ambient temperature is less than 32°F (0°C) or more than 113°F (45°C). It will take approximately 6 hours of charging the Magellan RoadMate through the vehicle power adapter or optional AC adapter to obtain a full battery charge. About the Battery • • Do not attempt to replace the battery. Please contact Magellan Technical Support for issues related to the battery. Use only the charger approved for your Magellan RoadMate. i IMPORTANT SAFETY WARNINGS Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: • • • • -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. In order to maintain compliance with FCC regulations, shielded cables must be used with this equipment. Operation with non-approved equipment or unshielded cables is likely to result in interference to radio and TV reception. The user is cautioned that changes and modifications made to the equipment without the approval of manufacturer could void the user's authority to operate this equipment. The Magellan RoadMate must be installed and operated at a distance no closer then 8 inches (20 cm) from the user. This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numerique de la classe B respecte toutes les exigences du Reglement sur le materiel brouilleur du Canada. ii IMPORTANT SAFETY WARNINGS IC statement Operation is subject to the following two conditions: 1. 2. This device may not cause interference and This device must accept any interference, including interference that may cause undesired operation of the device. IMPORTANT NOTE: IC Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The information provided in this document is subject to change without notice. Improvements and enhancements to the product may occur without any formal notification. Check the Magellan website (www.magellanGPS) for product updates and additional information. © 2008 Magellan Navigation, Inc. All rights reserved. The Magellan Logo, Magellan, Magellan RoadMate, TrueView, SmartDetour, and SmartVolume are trademarks of Magellan Navigation, Inc. No part of this user manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, for any purpose other than the purchaser’s personal use, without the prior written permission of Magellan Navigation, Inc. 604-0123-001 A iii Table of Contents Magellan RoadMate 1400 .......................................................................................................1 Magellan RoadMate 1400 ....................................................................................... 2 Installation Instructions ...........................................................................................................3 Selecting the Location ............................................................................................ 3 Items Needed ......................................................................................................... 3 Cleaning the Area ................................................................................................... 4 Applying the Adhesive Disk ..................................................................................... 4 Attach the Cradle to the Swivel Mount ...................................................................... 4 Secure the Swivel Mount to the Windshield or Adhesive Disk ...................................... 4 Attaching the Magellan RoadMate to the Cradle ........................................................ 5 Adjust the Mount for Optimum Viewing .................................................................... 5 Connecting Power .................................................................................................. 5 Connecting Traffic Antenna ..................................................................................... 5 Check Connection and Final Adjustments ................................................................. 6 Security ................................................................................................................ 6 Region .................................................................................................................. 6 Fundamentals ..........................................................................................................................7 Powering on the Magellan RoadMate ........................................................................ 7 Turning the Magellan RoadMate On ..................................................................... 7 Turning the Magellan RoadMate Off .................................................................... 7 Selecting Auto-Power Shutdown Time .................................................................. 7 Volume .................................................................................................................. 7 Changing the Volume from the Map Screen. ......................................................... 7 Changing the Volume from User Options .............................................................. 8 Brightness ............................................................................................................. 8 Accessing the Brightness Control ........................................................................ 8 The Main Menu ...................................................................................................... 8 Accessing the Main Menu ................................................................................... 8 .Main Menu - Page 1 ......................................................................................................9 .Main Menu - Page 2 .................................................................................................... 10 The Keypad ......................................................................................................... 11 Keypad Overview .......................................................................................................... 11 Special Keys ................................................................................................... 11 Selecting From List ....................................................................................................... 11 Notes on Entering Data .................................................................................................12 Table of Contents Magellan RoadMate 1400 1 Map Screen .......................................................................................................................... 13 Accessing the Map Screen ................................................................................ 15 2D Mode ......................................................................................................................15 Setting the Map Modes (2D or 3D) .................................................................... 15 Panning on the Map ......................................................................................... 15 Saving a Position While Panning ....................................................................... 15 Routing to a Panned Position ............................................................................ 16 Current Location Screen ....................................................................................... 16 Accessing the Current Location Screen .............................................................. 16 Saving Your Current Location to Your Address Book ............................................ 16 Maneuver List Screen ........................................................................................... 17 Accessing the Maneuver List ............................................................................. 17 Excluding a Maneuver ...................................................................................... 17 GPS Status Screen ............................................................................................... 17 Accessing the GPS Status Screen ..................................................................... 18 Zoom Levels ........................................................................................................ 18 Setting Zoom Levels ........................................................................................ 18 Volume ................................................................................................................ 18 Changing the Volume from the Map Screen. ....................................................... 18 Home Address ....................................................................................................................... 19 Creating a Home Address ................................................................................. 19 Creating a Route to the Home Address ............................................................... 19 Changing the Home Address ............................................................................. 19 Accessing the Home Address from the Address Book .......................................... 20 Enter Address ........................................................................................................................ 21 Entering an Address ............................................................................................. 21 Creating a Route to a New Address .................................................................... 21 My Addresses ....................................................................................................... 23 Accessing the My Addresses Menu .................................................................... 23 Previous Destinations ................................................................................................... 23 Routing to a Previous Destination (Method 1) ..................................................... 23 Routing to a Previous Destination (Method 2) ..................................................... 24 Saving a Previous Destination to Your Address Book ............................................ 24 Deleting a Previous Destination ......................................................................... 24 Address Book ...............................................................................................................25 Accessing an Address in Your Address Book ....................................................... 25 Routing to an Address in Your Address Book ...................................................... 25 Editing an Address in Your Address Book. .......................................................... 25 Table of Contents Magellan RoadMate 1400 2 Deleting an Address in Your Address Book. ........................................................ 25 Favorites ......................................................................................................................25 Accessing an Address from Favorites ................................................................. 26 Routing to an Address from Your Favorites List ................................................... 26 Editing an Address from Your Favorites List ....................................................... 26 Deleting an Address from Your Favorites List ...................................................... 26 Creating a New Entry .................................................................................................... 26 Creating a New Entry to You Address Book by Selecting on the Map ..................... 26 Creating a New Entry to You Address Book by Entering an Address ....................... 27 Creating a New Entry to You Address Book from a POI ........................................ 27 Creating a New Entry to You Address Book from by Intersections .......................... 28 Intersection ......................................................................................................... 28 Creating a Route to Two Intersecting Streets ...................................................... 28 Points of Interest (POI) .......................................................................................................... 30 Categories and Subcategories ................................................................................ 30 Creating a Route to a POI by Category ............................................................... 30 Creating a Route to a POI by Name ................................................................... 31 Enhanced POIs .................................................................................................... 31 Loading a POI File ........................................................................................... 31 Selecting Categories for Display on the Map ....................................................... 32 Setting Alarms ................................................................................................ 32 Setting Alarm Parameters ................................................................................. 33 Routing to an Enhanced POI ............................................................................. 33 Saving an Enhanced POI to Your Address Book .................................................. 34 Travelling on a Route ............................................................................................................ 35 Map Screen ......................................................................................................... 35 Split-Screen ..................................................................................................................35 Maneuver List ...............................................................................................................35 You Have Arrived .......................................................................................................... 36 Types of Routes ................................................................................................... 36 Route Method ...................................................................................................... 36 Special Routing Functions .................................................................................... 37 Routing to a POI Near an Approaching Freeway Exit ............................................ 37 Cancelling a Route .......................................................................................... 37 Detouring off a Route ....................................................................................... 37 Changing the Route Method ............................................................................. 38 Table of Contents Magellan RoadMate 1400 3 Trip Planner .......................................................................................................................... 39 Creating a Trip ................................................................................................ 39 Optimizing a Trip ............................................................................................. 40 Starting a Trip ................................................................................................. 41 Editing a Trip .................................................................................................. 41 Deleting a Trip ................................................................................................ 41 Renaming a Trip .............................................................................................. 41 Exit POIs ............................................................................................................................... 43 Routing to a POI Near an Approaching Freeway Exit ............................................ 43 User Options ......................................................................................................................... 44 Selecting Map Region ...................................................................................... 44 Accessing System Settings ............................................................................... 44 Checking Battery Life ....................................................................................... 44 Adjusting the Volume ....................................................................................... 44 Adjusting the Display Brightness ....................................................................... 45 Setting Auto Power Off Time ............................................................................. 45 Setting Time Zone ........................................................................................... 45 Selecting Units of Measure ............................................................................... 46 Displaying Contact Us Information .................................................................... 46 Displaying Product Information ......................................................................... 46 Performing Diagnostics .................................................................................... 47 Accessing the Trip Computer ............................................................................ 47 Selecting POIs to be Displayed on the Map ........................................................ 48 Deleting Addresses from the Address Book (Global) ............................................ 48 Setting the Map in 3D or 2D Mode .................................................................... 48 Setting the Map Display to Heading Up or North Up ........................................... 49 Setting Split Screen (TrueView™) Options ......................................................... 49 Setting Auto Night Map Display ........................................................................ 49 Setting Detour Options ..................................................................................... 50 Using the Simulator ......................................................................................... 50 Setting Tone Options ....................................................................................... 51 Viewing Technical GPS Information ................................................................... 51 Setting the GPS Position .................................................................................. 51 Backing Up and Restoring Data ........................................................................ 52 Backing Up Data ............................................................................................. 52 Restoring Data ................................................................................................ 52 Viewing Map Information .................................................................................. 52 Table of Contents Magellan RoadMate 1400 4 Magellan RoadMate 1400 The Magellan RoadMate 1400 is a vehicle navigation product that utilizes GPS signals from satellites to calculate your precise location and compute details about its travel. Knowing its position and movement, it can then overlay this information on detailed maps provided by NAVTEQ® to provide a visual representation of your location. With the Magellan RoadMate 1400 you can: • Store your home address and quickly get routing details to your home. • Create and save addresses in your address book that can be accessed at any time and get routing information to that address. • Route to an address that you enter using the keypad and Magellan’s QuickSpell feature for easy, errorless address entry. • Route to any point of interest (POI) that has been preloaded into your Magellan RoadMate. • Route to a POI that appears on the map while traveling simply by tapping on the POI icon. • Route to an intersection by selecting the intersecting streets. • Create a trip with multiple destinations using the trip planner. Handy for business people who need routing information to many destinations. • View POIs that are ahead of you on the freeway. The exit POI function provides you with a list of gas stations, restaurants, hotels and auto repair shops located nearby exits you are approaching while traveling on a freeway. • Customize your Magellan RoadMate to meet your needs using the User Options menu. The interface for the Magellan RoadMate is easy and simple to follow once you understand the basics. You may never need to refer to this manual but if you do we have tried to present it in a form that you can access the function you are trying to complete and follow the steps provided. The Magellan RoadMate has a built-in battery so in most cases you will be able to follow these instructions while reading them on your computer screen without plugging the Magellan RoadMate to AC power. You should note that while indoors you may not get any satellite signals so your location information would not be updated. However, the Centrality™ chipset installed in the Magellan RoadMate will get satellite signals in some very rough locations so you may notice the Magellan RoadMate computing a position, even indoors. This document is set up to be printed on 8.5” x 11” (letter) paper should you desire a printed version for your reference. Magellan RoadMate 1400 1 Magellan RoadMate 1400 A B C D A Power Button B Reset Button C USB connector. Power input from vehicle power adapter cable or AC power adapter (+5 VDC / 2A). D SD Card slot Magellan RoadMate 1400 2 Installation Instructions Installation of the Magellan RoadMate is simple and easy. The hardest part will be picking the best location. Selecting the Location A few tips on selecting the proper location. • Mount the Magellan RoadMate in a place where it can be easily seen and will not interfere with your view of the road. • The Magellan RoadMate should be mounted in such a way that the antenna, (located in the top of the receiver), has an unobstructed view of the sky through the windshield. • Select whether it will be mounted using the adjustable mount to the windshield or an adhesive disk. Be sure to check your local and regional laws before mounting to the windshield. Some states, like California and Minnesota, have laws restricting the mounting of any device on the windshield. (Adhesive Disks are available from the Magellan Store at www.magellanGPS.com if one was not supplied with the Magellan RoadMate.) • If planning to use the adhesive disk, a smooth surface on the dash board will need to be selected. Do not attach the adhesive disk to the windshield nor airbag covers. • Make sure that the Magellan RoadMate nor any cabling will be disturbed in the event that the airbags are deployed. Items Needed (no tools required) Vehicle Power Cable Cradle Swivel Mount Magellan RoadMate Adhesive Disk (optional) Alcohol Pad Please note that the swivel mount supplied with the Magellan RoadMate may be different then the one shown in this document. Installation 3 Cleaning the Area Use the alcohol pad that came with the Magellan RoadMate to clean the area on the windshield or dash that has been selected for mounting the Magellan RoadMate. Let the area dry completely. Applying the Adhesive Disk (Skip if mounting directly to the windshield.) Remove the protective tape from the back of the adhesive disk. Apply the disk with the adhesive side towards the dash. Maintain pressure on the disk for 5 minutes to allow it to set in place. Allow the disk 24 hours to cure before continuing. Attach the Cradle to the Swivel Mount Line up the two tabs on the swivel mount with the holes on the back of the cradle. Push the cradle down until it locks in place with the swivel mount. Secure the Swivel Mount to the Windshield or Adhesive Disk Make sure that the lever at the base of the adjustable mount is in the up position. Place the base of the swivel mount firmly over the area of the windshield to be used or the adhesive disk. Push the lever at the base of the swivel mount all the way down until it snaps in place. Carefully let go of the assembly, making sure that it is securely mounted. Installation 4 Attaching the Magellan RoadMate to the Cradle Align the tabs on the cradle to the indents on the bottom of the Magellan RoadMate. Swivel the cradle up so that it is flush against the back of the receiver and snap it into place. Adjust the Mount for Optimum Viewing Loosen the adjustment locking knobs and position the Magellan RoadMate for optimum viewing. Once set, tighten the locking knobs. (Never attempt to adjust the mount while driving.) Connecting Power Plug the end of the cigarette lighter adapter into a 12 VDC vehicle power receptacle. Connect the other end of the cable to the Magellan RoadMate’s USB connector as shown. If there is power at the receptacle, the Magellan RoadMate will power on. (Note: some vehicles apply power to the vehicle power receptacle only when the ignition is on.) Check Connection and Final Adjustments If the power indicator light on the vehicle power cable connector is on, power is being supplied to the Magellan RoadMate. If it is not on, check the cable connection to the vehicle power receptacle. If the light is still not on, turn the vehicle’s ignition on. Press the power button (located at the bottom right side of the RoadMate) and hold down for a few seconds. The Magellan RoadMate will power on. Sit in a normal driving position and make any final adjustments to the swivel mount for optimum viewing. Tighten the adjusting knobs on the swivel mount to hold the Magellan RoadMate firmly in place. Press the power button again to turn the Magellan RoadMate off and turn the ignition switch to the vehicle to off. The Magellan RoadMate is connected and ready for use. Installation 5 Security It is recommended that the Magellan RoadMate is not left in plain view while unattended for reasons of theft. Please note that the Magellan RoadMate is a receiver only and does not transmit GPS location signals. The receiver nor the vehicle can be tracked using the Magellan RoadMate. Region By default, the Magellan RoadMate has the region setting for the lower 48 United States. When the receiver is turned on for the first time it may ask you to assign regions. Select the map region you want to use by tapping on the item from the list. If you are travelling in other regions you will need to change the map region by using the following steps. 1 From the Main Menu, tap on the right arrow to access the second page of the Main Menu. 2 Tap on User Options. 3 Tap on Region. 4 Tap on the map region desired. The Region option will display the map regions that are available for the Magellan RoadMate you are using. Installation 6 Fundamentals Powering on the Magellan RoadMate The On/Off button is located on the bottom right side of the Magellan RoadMate as shown in the Overview chapter. Turning the Magellan RoadMate On 1. Press and hold the On/Off button for 1-2 seconds. 2. Read the Warnings and tap OK. Turning the Magellan RoadMate Off 1. Press and hold the On/Off button for 1-2 seconds. Selecting Auto-Power Shutdown Time The Magellan RoadMate can be set up to shut down automatically using the time durations you can select. The receiver will turn off after the selected duration has passed when; A) the position hasn’t changed and B) the touchscreen hasn’t been pressed. 1. Access the Main Menu. 2. Tap the Next arrow to access the Main Menu Page 2. 3. Tap User Options. 4. Tap System Settings. 5. Tap Power. 6. Select Auto-Power Off time; Never, 10 Minutes, 20 Minutes or 30 Minutes. 7. Tap Save. 8. Tap the Back arrow to return to the Main Menu. Volume There are two ways to access the volume controls; one is tapping the speaker icon on the Map screen and the other is through User Options. Changing the Volume from the Map Screen. 1. Tap the speaker icon . 2. Tap on the Mute button to mute the volume or tap inside the volume adjust bar below the Mute button to change the volume levels. 3. Tap . If you have the volume muted the speaker icon is displayed with a line through it indicating it is muted. To unmute, tap the speaker icon again and the Magellan RoadMate will automatically unmute. To make any other adjustments to the volume, press the speaker icon again. Fundamentals 7 Changing the Volume from User Options 1. Access the Main Menu. 2. Tap the Next arrow to access the Main Menu Page 2. 3. Tap User Options. 4. Tap System Settings. 5. Tap Volume. 6. Tap on the Mute button to mute the volume or tap inside the volume adjust bar below the Mute button to change the volume levels. 7. Tap . Brightness Accessing the Brightness Control 1. Access the Main Menu. 2. Tap the Next arrow to access the Main Menu Page 2. 3. Tap User Options. 4. Tap System Settings. 5. Tap Brightness. 6. Tap inside the brightness adjust bar to set the desired brightness. 7. Tap . On the Brightness screen there is a checkbox for “On-battery dimming (75%)” When checked, the Magellan RoadMate will dim to 75% of the brightness when operating exclusively on battery power. This prolongs the battery life between charges. It can be turned off by tapping on the checkbox. The Main Menu The Main Menu screen is the center for all the available functions for the Magellan RoadMate. The Main Menu consists of two pages with large, easy to access icons. Accessing the Main Menu From the Map screen tap the Menu button. From the other screens, tap the Back button. Fundamentals 8 .Main Menu - Page 1 Show Map: Displays the map with your current position (if computing a position from the GPS signals) indicated by the blue triangle. See the Map Screen chapter for details. Enter Address: Displays Enter Address menu. Addresses can be entered by first entering the city, zip code, or by selecting a city from a list of cities you have already used as destinations. Also provides access to your address book (my addresses) or to create a route to an intersection. See the chapter on Routing to an Address for details. Points of Interest: Displays the Search Points of Interest menu. Search for POIs by entering the name or by selecting from a list of available categories. Home: If you have created a Home address, press the Home button for quick access for routing to your home. If a Home address has not been created, a prompt is displayed to do so. See the Home Button chapter for more information. Roadside Assistance: Displays the Locate screen for easy access to information about your present position should you require assistance. Fundamentals 9 .Main Menu - Page 2 Trip Planner: Opens the Trip Planner menu where you can create, edit, delete, rename or activate a trip. Exit POI’s: (Accessible only while on a freeway.) Provides a listing of restaurants, gas stations, or hotels near approaching freeway exits. You can select one of the POIs presented and create a route to it. User Options: Accesses the User Options menu. This menu can be used to access functions used to customize the Magellan RoadMate to your personal needs. Home: If you have created a Home address, press the Home button for quick access for routing to your home. If a Home address has not been created, a prompt is displayed to do so. See the Home Button chapter for more information. Roadside Assistance: Displays the Locate screen for easy access to information about your present position should you require assistance. Fundamentals 10 The Keypad Understanding the keypad while entering an address is an important part of using your Magellan RoadMate. The keypad is the most common means of entering data into the Magellan RoadMate. Keypad Overview Special Keys Alphabetic Keypad Numeric Keypad Symbols Keypad Spacebar Backspace Accept Cancel Selecting From List After tapping “OK” to accept your input you may get a list of items found in the database. The sample here shows the result of tapping “OK” after entering “LOS A”. Use the scroll bar to move up and down the list and tap on the desired item in the list to continue. Fundamentals 11 Notes on Entering Data If you are having trouble getting the results you expected here are a few useful tips. • Make sure that you have spelled the name correctly. If you are unsure of the spelling, just enter a few characters and tap “OK”. A long list of names will be displayed but you can step through the list and probably be able to find the correct spelling. • Check for apostrophes and hyphens. If you are not seeing the POI you are looking for in the POI list, check to see if the name has an apostrophe or hyphen. • When entering a street name you can use the street prefix (N. E. W. S. etc.) to narrow the search. For example to find N. Main St. you could enter “N. Main” or “N Main”. • The more characters you enter, the smaller the list of possible options from which to choose. Fundamentals 12 Map Screen The most commonly used screen will be the Map screen. Whether on a route or just travelling around town, chances are the Map screen will be displayed. There are two unique modes that the Map screen can be displayed in; normal and routing. In normal mode, your position is shown on the map along with the time and your speed. As you travel, your position will be updated, giving you a clear view of your position and surrounding streets. A B K C J D I E F G H Map Screen - Normal Mode A Street name currently on. B Direction indicator. Tap to view the Current Location screen where you can save your position into your Address Book. C Zoom out D POI icon. Sample shown here is for a gas station. Tap on the POI icon to create a route to that POI. Note: If there are multiple POIs in the same area, a list of those POIs will be displayed. Tap on the name in the list to access the routing function. E Current position icon F Time of day G Main Menu button. Tap to display the Main Menu. H Current speed of travel I Volume control. Tap to display the Volume Setting screen where the loudness can be adjusted or muted. (If the volume has been muted, tapping this button unmutes the volume without displaying the Volume Setting screen.) J Zoom in K Satellite Status. All four bars in green is optimal. Tap to display the GPS Status screen. Map Screen 13 In routing mode additional information is displayed providing detailed information about the route you’ve selected. A B N C M D L E K F J G I H Map Screen - Routing Mode A Street name currently on. B Direction indicator. Tap to view the Current Location screen where you can save your position into your Address Book. C Zoom out D POI icon. Sample shown here is for a gas station. Tap on the POI icon to create a route to that POI. Note: If there are multiple POIs in the same area, a list of those POIs will be displayed. Tap on the name in the list to access the routing function. E Current position icon F Next maneuver icon. Tap on the icon to display the Maneuver List screen. G Distance to next maneuver. Tap to repeat the last voice command. H Main Menu button. Tap to go to the Main Menu screen. Note that the Main Menu screen is different when there is an active route. See the chapter on Routing for details. I Tap to toggle between distance remaining to reach destination, approximate time remaining until the destination is reached and the approximate the time of day to arrive at the destination. J Street name for the next maneuver K Graphical representation of the route L Volume control. Tap to display the Volume Setting screen where the loudness can be adjusted or muted. (If the volume has been muted, tapping this button unmutes the volume without displaying the Volume Setting screen.) M Zoom in N Satellite Status. All four bars in green is optimal. Tap to display the GPS Status screen. Map Screen 14 Accessing the Map Screen 1. On the Main Menu, tap Show Map. 2D Mode The map is normally displayed in 3D mode but you can set the map to 2D mode if so desired. Choose the mode that is best suited for you. In 2D mode, you can pan across the map looking for a location to route to or save in your address book. Setting the Map Modes (2D or 3D) 1. From the Map screen, tap MENU. 2. Tap the Next arrow to access page 2 of the Main Menu. 3. Tap User Options. 4. Tap Map Options. 5. Tap 3D Map or 2D Map. 6. Tap Save. Map Screen in 2D Mode Map Screen in 3D Mode Panning on the Map 1. While viewing the Map screen in 2D mode, slide your finger or stylus across the map. 2. The location icon changes to . (The circle is the crosshairs for a position and the red arrow points to your current location. 3. To exit panning, tap and the map is returned to your current position. Saving a Position While Panning 1. Pan the map until the icon crosshairs are over the location you want to save to your address book. (Must be a position that is does not have a POI icon displayed.) 2. Tap in the center of the icon circle. (If nothing happens then you are not zoomed in enough. Tap the zoom in icon and try again.) 3. On the Route To This Address? screen, tap 4. Edit Information: Tap on the Edit Name line to create a name for this location. Tap on any of the three (work, home, mobile) phone buttons to enter a phone number. Tap on the Edit Information line to add additional information. (Up to 35 characters can be entered.) 5. If you want to tag this location as one of your favorites, tap on the “Favorite” check box. Map Screen . 15 6. When the details for this address are acceptable, tap 7. If you want to now route to this address tap 8. Tap . or if you are done tap . to exit panning and return the icon to your current position. Routing to a Panned Position 1. Pan the map until the icon crosshairs are over the location you want to route to. 2. Tap in the center of the icon circle. (If nothing happens then you are not zoomed in enough. Tap the zoom in icon and try again.) 3. On the Route To This Address? screen, tap 4. Select the routing method desired and tap the Calculate Route , button. Current Location Screen This screen is accessed from the Map screen whether you are on a route or just normal driving. The Current Location screen displays approximate address information, the next and previous cross streets, as well as your latitude/longitude. To the right is a compass point in your direction of travel, calculated elevation, and speed. The bottom bar displays the current time and date. Accessing the Current Location Screen 1. From the Map screen, tap the direction icon in the upper left corner. Saving Your Current Location to Your Address Book 1. Access the Current Location screen. 2. Tap 3. Edit Information: Tap on the Edit Name line to create a name for this location. Tap on any of the three (work, home, mobile) phone buttons to enter a phone number. Tap on the Edit Information line to add additional information. (Up to 35 characters can be entered.) 4. If you want to tag this location as one of your favorites, tap on the “Favorite” check box. 5. When the details for this address are acceptable, tap Map Screen Saving Current Location . 16 Maneuver List Screen This screen is accessed from the Map screen and only when routing. (Note: The Maneuver List screen is not available until you begin moving on the route.) Each line in the maneuver list provides details about the maneuver in the order that they are to be made, with the next maneuver at the top. The bottom bar of the Maneuver List indicates the distance and time to the next maneuver as well as the total distance computed for the route. Maneuver List The Maneuver List can be modified if you want to exclude one of the maneuvers should you want to avoid travelling one of the streets listed. Instructions to exclude one of the maneuvers is described in this chapter. The maneuver highlighted indicates that you will be instructed to make a left turn in 0.3 miles on CA-57 S Accessing the Maneuver List 1. Tap the maneuver icon in the lower left corner of the Map screen. This icon is displayed only while on an active route. Excluding a Maneuver This is used to modify the route to possibly avoid routing on a particular street. 1. Access the Maneuver List. 2. Tap on the item in the list with the street you want to try and avoid. 3. Confirm the exclusion by tapping on 4. The Magellan RoadMate recalculates the route and displays the Maneuver List with the newly computed maneuvers. . (Tap the back arrow to cancel.) GPS Status Screen 1. The GPS Status screen is also accessed from the Map screen and displays the status of the GPS satellites in a graphical format. (More technical information on the GPS status can be found in under the User Options menu: Main Menu Page 2 > User Options > GPS Options > GPS Status.) Green bars indicate that the Magellan RoadMate is using these satellites to compute the position; orange bars indicate that the Magellan RoadMate is trying to lock on to GPS Status Screen Map Screen 17 the satellite signal; and no bar shown indicates a satellite that is not being tracked. The longer the bars, the better the signal. Accessing the GPS Status Screen 1. From the Map screen, tap the GPS Signal Strength icon in the upper right corner. Tap on the back arrow to return to the Map screen. Zoom Levels There are 23 zoom levels in the Magellan RoadMate, ranging from 100 feet to 1200 miles. Select the zoom level that best suits your needs. Setting Zoom Levels 1. While viewing the Map screen, tap on the (zoom in) or (zoom out). Volume The volume can be adjusted or muted from the Map screen. (The volume can also be adjusted from User Options > System Settings > Volume.) Changing the Volume from the Map Screen. 1. Tap the speaker icon . 2. Tap on the Mute button to mute the volume or tap inside the volume adjust bar below the Mute button to change the volume levels. 3. Tap . If you have the volume muted the speaker icon is displayed with a line through it indicating it is muted. To unmute, tap the speaker icon again. Map Screen 18 Home Address Your home address can be entered and saved in the Magellan RoadMate for quick and easy access when you need to create a route home. Creating a Home Address These instructions only apply if you have never entered a home address or if it has been deleted. 1. Tap the Home Address icon on the Main Menu screen. 2. Confirm “Do you want to enter your HOME address?” Tap Yes. 3. Follow the prompts to enter the address to be used as your HOME address. 4. When the Address screen is displayed, edit the information and top SAVE to continue. 5. The HOME address is saved in your address book and you are returned to the Main Menu screen. Creating a Route to the Home Address 1. Tap the Home Address icon on the Main Menu screen. 2. Tap Route. 3. Select the Route Method desired and tap the orange Calculate Route button. Changing the Home Address 1. Tap the Home Address icon 2. Tap Change. 3. Confirm “Do you want to replace the HOME address with a new address?” Tap Yes. 4. Follow the prompts to enter the address to be used as your new HOME address. Home Address on the Main Menu screen. 19 5. When the Address screen is displayed, edit the information and top SAVE to continue. 6. The new HOME address is saved in your address book and you are returned to the Main Menu screen. Accessing the Home Address from the Address Book 1. From the Main Menu, tap the Enter Address icon. 2. Tap the My Addresses icon. 3. Tap Address Book. 4. Tap List All. 5. The list of addresses in your address book are displayed with the home icon on the line of your HOME address. 6. Tap on the home item in the list to create a route to, edit or delete the HOME address. Home Address 20 Enter Address The Enter Address function is used to create a route from a newly entered address, an address in your address book or to an intersection of two streets. Entering an Address While creating an address the first step is to indicate what city the address is in. This can be done by inputting the name of the city, entering the zip code for the city or by selecting a city that has been previously used. Creating a Route to a New Address 1. From the Main Menu, tap the Enter Address icon. 2. Select the method to enter the city: Enter City, Enter Zip Code, or Previous City. Enter City: Use the keypad to enter the first few characters of the city name. Tap OK to display the list of cities found. The button in the lower right corner is used to select the sorting order of the list, by zip code or alphabetically. Tap on the desired city in the list. List of Cities Enter Zip Code: Use the keypad the zip code for the city. Tap OK when the zip code is complete. The button in the lower right corner is used to select the sorting order of the list, by zip code or alphabetically. Tap on the desired city in the list. Cities with the Zip Code Entered Previous City: Tap on the desired city in the list. List of Cities Previously Used Enter Address 21 3. With the city selected, the keypad will be displayed asking for the street name. Use the keypad with QuickSpell to enter the street name. Enter the first few characters of the street name and tap OK or continue entering characters until the list of streets is displayed. You can use street prefixes (N, E, W, S, etc.) if desired. Samples the city Pasadena, California: Entering “ALLE” results in: Entering “N A” or “N. A” results in: Enter Address However, typing in “NOR” can give some unexpected results if you are trying to type in the word “NORTH ALLEN”.: Entering “NOR” To resolve this, use the back arrow from the street list and continue typing in the word NORTH. Now all streets beginning with “North” as well as streets with the north prefix are displayed. Entering “NORTH” 22 4. Use the scroll bars to the right if necessary to view the name of the street desired. Tap on the street name to continue. 5. Use the keypad to enter the street number for the address. Note in the top left corner is the range of acceptable street numbers. 6. Tap Done when the address is complete. 7. Select the desired route method and tap the orange Calculate Route button to begin routing. My Addresses My Addresses is where you store addresses that you want to keep as future destinations as well as access addresses that you have gone to recently that may not be in your address book. The address book can hold up to 100 addresses. Accessing the My Addresses Menu 1. From the Main Menu, tap the Enter Address icon. 2. Tap on the my addresses icon. 3. The My Addresses Menu is displayed. Previous Destinations Routing to a Previous Destination (Method 1) 1. From the Main Menu, tap the Enter Address icon. 2. Tap on the Previous Destinations icon. 3. Select the destination from the list of previous destinations. 4. Select the Route Method and tap the orange Calculate Route button. Enter Address 23 Routing to a Previous Destination (Method 2) 1. From the Main Menu, tap the Enter Address icon. 2. Tap on the my addresses icon. 3. Tap on Previous Destinations. 4. Select the destination from the list of previous destinations. 5. Tap on Route. 6. Select the Route Method and tap the orange Calculate Route button. Saving a Previous Destination to Your Address Book 1. From the Main Menu, tap the Enter Address icon. 2. Tap on the my addresses icon. 3. Tap on Previous Destinations. 4. Select the destination from the list of previous destinations. 5. Tap on Edit. 6. Apply any edits you want to make to this destination before saving. 7. Check Favorite if you want this addresses store in your address book as a Favorite. 8. Tap Save to store the address. 9. The Previous Destination screen is displayed. Tap Route to route to this destination or the Back arrow to return to the list of previous destinations. Deleting a Previous Destination 1. From the Main Menu, tap the Enter Address icon. 2. Tap on the my addresses icon. 3. Tap on Previous Destinations. 4. Select the destination from the list of previous destinations. 5. Tap on Delete. 6. Confirm Deletion. Tap Yes. 7. The Enter Address Menu will be displayed. Enter Address 24 It is possible to delete all of the destinations in the Previous Destination List by accessing User Options > Address Book Options > Clear Previous. Address Book Accessing an Address in Your Address Book 1. From the Main Menu, tap the Enter Address icon. 2. Tap on the my addresses icon. 3. Tap on Address Book 4. Tap List All to view the entire contents of your address book or tap on Search Address Book to search for entries by searching on the name. 5. From the list of addresses found, tap on the address record desired. Routing to an Address in Your Address Book 1. Access the address record from your address book as described in Accessing an Address in Your Address Book. 2. Tap on Route. 3. Select the Route Method and tap on the orange Calculate Route button to continue. Editing an Address in Your Address Book. 1. Access the address record from your address book as described in Accessing an Address in Your Address Book. 2. Tap on Edit. 3. Use the Edit Address Book screen to modify the name, information or phone numbers. The street address cannot be changed. 4. Tap Save when done. Deleting an Address in Your Address Book. 1. Access the address record from your address book as described in Accessing an Address in Your Address Book. 2. Tap on Delete. 3. Confirm deletion. Tap Yes. 4. You are returned to the list of addresses in your address book. If the list is now empty, you are returned to the previous screen. Favorites Enter Address 25 Favorite addresses operate the same as other addresses in your address book. Addresses in your address book can be marked as favorites to speed up the search for commonly used addresses. Accessing an Address from Favorites 1. From the Main Menu, tap the Enter Address icon. 2. Tap on the my addresses icon. 3. Tap on Favorites 4. From the list of addresses found, tap on the address record desired. Routing to an Address from Your Favorites List 1. Access the address record from your Favoites as described in Accessing an Address from Favorites. 2. Tap on Route. 3. Select the Route Method and tap on the orange Calculate Route button to continue. Editing an Address from Your Favorites List 1. Access the address record from your Favoites as described in Accessing an Address from Favorites. 2. Tap on Edit. 3. Use the Edit Address Book screen to modify the name, information or phone numbers. The street address cannot be changed. 4. Tap Save when done. Deleting an Address from Your Favorites List 1. Access the address record from your Favoites as described in Accessing an Address from Favorites. 2. Tap on Delete. 3. Confirm deletion. Tap Yes. Creating a New Entry This is used to create a new address and save it in your address book. You can create an entry by selecting it on the map, entering the address, selecting an address from the list of POIs or choosing a street intersection. Creating a New Entry to You Address Book by Selecting on the Map Enter Address 26 1. From the Main Menu, tap the Enter Address icon. 2. Tap on the my addresses icon. 3. Tap on Create New Entry. 4. Tap on Select on Map. 5. The Map screen is displayed in 2D mode. Use your finger or stylus to pan around the map. When the crosshair icon is over the location you want to add to your address book, tap in the center of the crosshairs. (Note: you may need to zoom into a lower zoom level if the edit Address Book screen is not displayed.) 6. Edit the name, information and phone numbers for the location you selected on the map. Tap the Favorites checkbox if you want this saved as a favorite address. 7. Tap Save. Creating a New Entry to You Address Book by Entering an Address 1. From the Main Menu, tap the Enter Address icon. 2. Tap on the my addresses icon. 3. Tap on Create New Entry. 4. Tap on Enter Address. 5. Enter the address following the prompts. Detail on address entry can be found in this chapter in the Entering an Address section, 6. Edit the name, information and phone numbers for the location you selected on the map. Tap the Favorites checkbox if you want this saved as a favorite address. 7. Tap Save. Creating a New Entry to You Address Book from a POI 1. From the Main Menu, tap the Enter Address icon. 2. Tap on the my addresses icon. 3. Tap on Create New Entry. 4. Tap on POIs. 5. Select the category from the list of POI categories. 6. If a subcategory list is displayed, select ALL Subcategories or one from the list. Enter Address 27 7. Select search criteria: Near Current Position Displays POIs in the category selected nearest to your current position. If no POIs are within a 50 mile radius, the search is empty and an alert displayed. Near City: Enter a city name using the keypad (no QuickSpell) and select the city center desired from the resulting list. This will display POIs in the category selected nearest to the city center selected.( Near Address: Enter an address using the standard address entry function. This will display POIs in the category selected nearest to the address entered. 8. Tap on the POI name desired from the list. Use the Prev and Next buttons to scroll up and down the list.( 9. Edit the name, information and phone numbers for the POI selected. Tap the Favorites checkbox if you want this saved as a favorite address. 10. Tap Save. Creating a New Entry to You Address Book from by Intersections 1. From the Main Menu, tap the Enter Address icon. 2. Tap on the my addresses icon. 3. Tap on Create New Entry. 4. Tap on Intersection. 5. Select the city that the intersection is located in by entering the city name, entering the zip code or selecting from the previous cities list. 6. Search for the first street by spelling out the street name following the guidelines presented in Entering an Address. Tap on the street from the list of streets. 7. Search for the second street the same as in step 6. However, the Magellan RoadMate uses QuickSpell to allow you to select only streets that intersect with the street selected in step 6. Tap on the intersecting street from the list of streets. 8. Edit the name, information and phone numbers for the POI selected. Tap the Favorites checkbox if you want this saved as a favorite address. 9. Tap Save. Intersection Creating a Route to Two Intersecting Streets 1. From the Main Menu, tap the Enter Address icon. 2. Tap on the intersection icon. Enter Address 28 3. Select the city that the intersection is located in by entering the city name, entering the zip code or selecting from the previous cities list. 4. Search for the first street by spelling out the street name following the guidelines presented in Entering an Address. Tap on the street from the list of streets. 5. Search for the second street the same as in step 6. However, the Magellan RoadMate uses QuickSpell to allow you to select only streets that intersect with the street selected in step 6. Tap on the intersecting street from the list of streets. 6. Select the Route Method and tap on the orange Calculate Route button. Enter Address 29 Points of Interest (POI) The Magellan RoadMate has POIs preloaded that can be used as a destination for a route. Selecting a restaurant or finding an ATM nearby is at your fingertips. Categories and Subcategories POIs are categorized into unique categories from gas stations to wineries. Most, but not all categories are further organized into subcategories. Restaurants have, for example, 16 subcategories that provide a way to search for restaurants serving Chinese food, or fast food, and even Swiss food. Creating a Route to a POI by Category 1. From the Main Menu, tap the Points of Interest icon. 2. Select Search by Category. 3. Use the scroll bars to view the categories and tap on the desired category name. Category List 4. If a subcategory is displayed, use the the scroll bars to view the subcategories and tap on the desired subcategory name. Select ALL SUBCATEGORIES if you are unsure what subcategory best suits your needs. 5. Select the search criteria: Near Current Position, Near What City? (requires entering a city name) or Near Address (requires entering an address). 6. The top portion of the display shows detailed information about the highlighted POI in the list. The arrow and distance indicates the direction and distance in a straight line from your current position to the POI. Use the Prev and Next buttons to step up and down the list of POIs found. Tap on the POI name to continue. 7. Select the route method and tap on the orange Calculate Route button to begin. Points of Interest Sample Restaurant Sub Category List Restaurants Near Current Position 30 Creating a Route to a POI by Name 1. From the Main Menu, tap the Points of Interest icon. 2. Select Search by Name. 3. Spell the name of the POI to be used as the destination. You need not enter the full name, but the more characters you enter, the easier it will be to find the exact POI you are searching for. 4. Select the search criteria: Near Current Position, Near What City? (requires entering a city name) or Near Address (requires entering an address). Sample Search by Name Input 5. The top portion of the display shows detailed information about the highlighted POI in the list. The arrow and distance indicates the direction and distance in a straight line from your current position to the POI. Not that searching by name will show all POIs that meet the name criteria, regardless of category. In the sample shown here, there are home improvement Search Result for LOWE Near Position centers (Lowe’s) and parks (Lowell Brandt Park). Use the Prev and Next buttons to step up and down the list of POIs found. Tap on the POI name to continue. 6. Select the route method and tap on the orange Calculate Route button to begin. Enhanced POIs Enhanced POIs are points of interest that are user-created using the POI Manager software found on the CD-ROM. After loading a POI file to an SD / MMC card and loading it in the Magellan RoadMate, you can route to those POIs quickly. Loading a POI File 1. Save a POI file created with the POI Manager to an SD/MMC card and install the card in the SD/MMC slot on the left side of the Magellan RoadMate. 2. From the Main Menu, tap the Points of Interest icon. 3. Select Enhanced. 4. Select My POI. Points of Interest 31 5. Select Change My POI File. 6. Select Select a POI File. 7. Select the POI file to be loaded from the list of available POI files by tapping on the file name. POI File List Selecting Categories for Display on the Map A POI file must be loaded (see Loading a POI File) for this function to operate. 1. From the Main Menu, tap the Points of Interest icon. 2. Select Enhanced. 3. Select My POI. 4. Select Change My POI FIle. 5. Select Display Categories. 6. Use the checkbox to the left of the category name to select or deselect the category. (Checked means this category will have its icon displayed on the map.) Tap Mark All to check all categories or Clear All to uncheck all categories. 7. Tap Save when done. Enhanced POI Category List Setting Alarms A POI file must be loaded (see Loading a POI File) for this function to operate.An enhanced POI can have an alarm that will alert you when you are in range set by “Alert Parameters.” Note that all POIs in the categories selected will have their alarms set to on. A POI file must be loaded (see Loading a POI File) for this function to operate. 1. From the Main Menu, tap the Points of Interest icon. 2. Select Enhanced. 3. Select My POI. Points of Interest 32 4. Select Change My POI FIle. 5. Select Set Alarms. 6. Use the checkbox to the left of the category name to select or deselect the category. (Checked means this category will have its alarms turned on.) Tap Mark All to check all categories or Clear All to uncheck all categories. 7. Tap Save when done. Setting Alarm Parameters An enhanced POI can have an alarm that will alert you when you are in range set by “Alert Parameters.” Note that all POIs in the categories selected will have their alarms set to on. A POI file must be loaded (see Loading a POI File) for this function to operate. 1. From the Main Menu, tap the Points of Interest icon. 2. Select Enhanced. 3. Select My POI. 4. Select Change My POI FIle. 5. Select Set Alarms. 6. Select the category from the category list whose alarm parameters are to be changed. 7. Set the detection angle, the first warning and the last warning by tapping on the button with the current setting. 8. Use the keypad to enter in new values and tap OK. 9. Tap Save when done. Routing to an Enhanced POI A POI file must be loaded (see Loading a POI File) for this function to operate. 1. From the Main Menu, tap the Points of Interest icon. 2. Select Enhanced. 3. Select My POI. 4. Select Select Category. 5. Select the category containing the POI you want to route to from the category list. 6. Select Nearest (near your current position) or Spell POI Name (requires entering the POI name). 7. Select the POI to be routed to from the “Select POI” list. Points of Interest 33 8. Tap Route. 9. Select the routing method desired and tap the orange Calculate Route button to continue. Saving an Enhanced POI to Your Address Book A POI file must be loaded (see Loading a POI File) for this function to operate. 1. From the Main Menu, tap the Points of Interest icon. 2. Select Enhanced. 3. Select My POI. 4. Select Select Category. 5. Select the category containing the POI you want to route to from the category list. 6. Select Nearest (near your current position) or Spell POI Name (requires entering the POI name). 7. Select the POI to be routed to from the “Select POI” list. 8. Tap Save. 9. Edit the POI information and tap Save. 10. The Route To This POI screen is displayed again. Tap on Route to create a route or Cancel to quit. Points of Interest 34 Travelling on a Route Map Screen When a route has been calculated it will be displayed on the Map screen in green with blue arrows indicating direction of travel. The top of the screen displays the name of the street you are on. The bottom provides information about the next maneuver needed. The sample to the right shows that the next maneuver will be to turn right in 3.3 miles on Fairplex Dr. The total distance to the destination is 4.7 miles. Map Screen with Route Shown As the route progresses, voice alerts will be used to prompt you of upcoming maneuvers. If you miss a prompt, or want it repeated, tap on the ‘next maneuver in xxx mi.” data field. There is also a bell that will alert you where the maneuver is to be performed. (This tone can be changed in User Options > Tone Options.) Split-Screen As a maneuver is approached, the Magellan RoadMate displays a split-screen alerting you of the upcoming maneuver. This screen will close automatically as the maneuver gets closer or you can tap ESC to close this screen and return to the Map screen. (This screen can be set to not display in User Options > Map Options.) Split-Screen Maneuver List The Maneuver List displays all of the maneuvers needed to be made to complete the route and arrive at the destination. To view the Maneuver List, tap on the maneuver icon in the bottom left corner of the Map screen. (The Maneuver List is described in detail in the Map chapter of this manual.) Maneuver List Travelling on a Route 35 You Have Arrived Finally, the Magellan RoadMate will provide a visual alert when you have arrived at the destination. Tap the Back arrow to return to the Map screen. (The Magellan RoadMate will automatically return to the Map screen after a fixed time if you do not tap the Back arrow.) You Have Arrived. Types of Routes There are a wide variety of ways to create a route and each of them are discussed in the chapter that they are associated with. Some of the more common methods and the chapter they are described are: • A route to a new address (Street Address) • A route to an address in your address book (Street Address) • A route to a Previous Destination (Street Address) • A route to a street intersection (Street Address) • A route to a POI preloaded in the Magellan RoadMate (Points of Interest) • A trip (a route with multiple destinations) (Trip Planner) • A route to your home address (Home Address) Route Method Regardless of which route type has been created, the Magellan RoadMate needs to know how the route is to be calculated. Routes can be calculated by Fastest Time, Shortest Distance, Least Use of Freeways or Most Use of Freeways. To select the route method, tap on the radio button for the desired method. The Magellan RoadMate can be set to avoid toll roads as much as possible by tapping on the Avoid Toll Roads checkbox. Route Method The View on Map button displays the Map screen with the destination shown. Tap on ESC to return to the Route Method screen. When the route method has been selected and you are ready to begin calculating the route, tap on the Route Calculate button. Route Calculate button Travelling on a Route 36 Special Routing Functions When a route is active, the Main Menu functions are changed to support special routing functions. Routing to a POI Near an Approaching Freeway Exit Note: This function is available only while on a freeway. Also, when you create a route to a POI near an exit, the original route will be cancelled. You will need to reset the original route when you are ready to continue. 1. From the Map screen, tap MENU. 2. Tap the Exit POIs icon. 3. Tap on the POI icon (restaurant, gas station or hotel) for the exit required. 4. A list of POIs in the category selected that are near the exit chosen will be displayed. 5. Tap on the POI in the list that you want routing directions to. 6. Select the Route Method and tap the orange Calculating Route button. Exit POI List Cancelling a Route 1. From the Map screen, tap MENU. 2. Tap the Cancel Route icon. 3. Confirm cancelling of the route. Tap Yes. Detouring off a Route 1. From the Map screen, tap MENU. 2. Tap the Detour icon. 3. Select the distance to avoid (3 mi., 5 mi., 10 mi. or Custom) that will be used to calculate the route will then put you back on the original route. 4. Tap Route. 5. The detour will be calculated using the same routing method used to create the route. Travelling on a Route 37 Changing the Route Method If you travel off the computed route, the Magellan RoadMate will automatically re-calculate the routing information to get you to your original destination using the routing method you selected when creating the route. However, if you want to change the routing method (while on or off the route), you will need to use the re-route function. 1. From the Map screen, tap MENU. 2. Tap the Reroute icon. 3. Select the desired routing method and tap the orange Calculate Route button. Travelling on a Route 38 Trip Planner The Trip Planner is used to create a route with multiple destinations. In this document we refer to a route with multiple destinations as a “Trip”. Creating a Trip 1. From page 2 of the Main Menu, tap the Trip Planner icon. 2. Select New from the Trip Planner Menu. 3. Use the keypad to enter in a name for this trip. 4. Tap OK. Enter a Trip Name 5. Begin by adding the first destination in the trip. Tap Add. 6. Select the method to be used to find or create the destination icon: Enter Address, Address Book, POIs, or Intersection. 7. Follow the instructions for the method chosen to select the destination. See the chapters on Enter Address and POI for help in selecting destinations. 8. Tap add to begin When the destination is found the Add Address to Trip screen is displayed. Tap Save. Tap Save to Add the Address Trip Planner 39 9. The list of trip destinations is displayed. First Destination Added 10. Tap on the destination name to bring up the menu or tap Append. 11. Repeat steps 5 though 9 until the trip is complete with all desired destinations. Tap to open menu. 12. Tap Save. Saving completed trip. Optimizing a Trip While creating a trip or editing a trip you can optimize the order of the destinations but using the Optimize button. 1. View the trip list, either while creating the trip or from the Edit button when selecting Trip Planner. 2. Tap Optimize. 3. Tap Save to store the changes to the trip. Trip Planner 40 Starting a Trip 1. From page 2 of the Main Menu, tap the Trip Planner icon. 2. Select Guide Me from the Trip Planner Menu. 3. Select the trip to be used from the stored trips list. 4. Tap on the destination in the list to be used to as the first destination in the trip. 5. Select the routing method to be used and tap the orange Calculate Route button. Editing a Trip 1. From page 2 of the Main Menu, tap the Trip Select first destination. Planner icon. 2. Select Edit from the Trip Planner Menu. 3. Select the trip to be edited from the stored trips list. 4. Tap on the destination to be edited. You can: Add a destination following the one selected. Move the destination up in the list. Move the destination down in the list. Delete the destination from the trip. 5. When the trip has been edited, tap Save. Edit Trip Deleting a Trip 1. From page 2 of the Main Menu, tap the Trip Planner icon. 2. Select Delete, Rename from the Trip Planner Menu. 3. Tap Delete. 4. Select the trip to be deleted from the stored trips list. 5. Confirm the deletion of the trip. Tap Yes. Renaming a Trip Trip Planner 41 1. From page 2 of the Main Menu, tap the Trip Planner icon. 2. Select Delete, Rename from the Trip Planner Menu. 3. Tap Rename. 4. Select the trip to be renamed from the stored trips list. 5. Use the keypad to edit the name of the trip. 6. Tap OK. Trip Planner 42 Exit POIs The Exit POI function provides a way of accessing commonly used POIs that are near an exit you are approaching while travelling on a freeway. Exit POIs include restaurants, gas stations and hotels. Exit POIs can be accessed while on a route or just driving, as long as you are on a freeway. Routing to a POI Near an Approaching Freeway Exit Note: This function is available only while on a freeway. Also, when you create a route to a POI near an exit, the original route will be cancelled if you are travelling on a route. You will need to reset the original route when you are ready to continue. 1. From the Map screen, tap MENU. 2. Tap the Exit POIs icon. 3. Tap on the POI icon (restaurant, gas station or hotel) for the exit required. Exit POI List 4. A list of POIs in the category selected that are near the exit chosen will be displayed. 5. Tap on the POI in the list that you want routing directions. 6. Select the Route Method and tap the orange Calculating Route button. Sample List of Automotive POIs Exit POIs 43 User Options Use User Options to customize the Magellan RoadMate to better suit your needs from a GPS navigator. Tapping the Back arrow from any of the User Option screens will cancel the changes. Selecting Map Region Choose the map region you will be travelling in. 1. From page 2 of the Main Menu, tap User Options. 2. Tap Region. 3. Tap on the desired map region (Lower 48 States, Puerto Rico or Hawaii). Accessing System Settings Commonly used settings are found in the System Settings section of User Options. 1. From page 2 of the Main Menu, tap User Options. 2. Tap System Settings. Checking Battery Life 1. From page 2 of the Main Menu, tap User Options. 2. Tap System Settings. 3. The battery life indicator is found at the bottom of the screen. All green indicated full battery life. Adjusting the Volume Volume can also be adjusted by tapping on the speaker icon on the Map screen. 1. From page 2 of the Main Menu, tap User Options. 2. Tap System Settings. 3. Tap Volume. 4. Tap along the adjustment bar to increase or decrease the speaker volume. 5. Tap Mute to turn the speaker off. Tap Mute again to turn the speaker back on. User Options 44 6. Tap Save. Adjusting the Display Brightness 1. From page 2 of the Main Menu, tap User Options. 2. Tap System Settings. 3. Tap Brightness. 4. Tap along the adjustment bar to increase or decrease the display brightness. 5. Tap On-battery dimming (75%) to set it on or off. (Checked is on.) Checking it on will save battery life while operating the Magellan RoadMate without external power. 6. Tap Save. Setting Auto Power Off Time The auto power setting will define the time that the Magellan RoadMate will automatically turn off if it hasn’t moved or the touchscreen accessed. 1. From page 2 of the Main Menu, tap User Options. 2. Tap System Settings. 3. Tap Power. 4. Select Never, 10 Minutes, 20 Minutes or 30 Minutes. 5. Tap Save. Setting Time Zone 1. From page 2 of the Main Menu, tap User Options. 2. Tap System Settings. 3. Tap Time Zone. 4. Use the “-” and “+” buttons to set through the time zones until the time zone for your area is displayed. 5. Check Daylight Savings if daylight savings is in effect for your time zone. (Daylight savings is not automatically adjusted.) 6. Tap Save. User Options 45 Selecting Units of Measure 1. From page 2 of the Main Menu, tap User Options. 2. Tap System Settings. 3. Tap Units of Measure. 4. Select Miles/Feet or Kilometers/Meters. 5. Tap Save. Displaying Contact Us Information 1. From page 2 of the Main Menu, tap User Options. 2. Tap System Settings. 3. Tap 4. Tap Contact Us. 5. Tap Back arrow. . Displaying Product Information 1. From page 2 of the Main Menu, tap User Options. 2. Tap System Settings. 3. Tap Next. 4. Tap Product Information. 5. Tap Next to view additional product information. Tap Prev to return to page 1. 6. User Options Tap the Back arrow to exit. 46 Performing Diagnostics 1. From page 2 of the Main Menu, tap User Options. 2. Tap System Settings. 3. Tap Next. 4. Tap Diagnostics. 5. Tap Audio Test, Touchscreen Test or Video Test. 6. When done, tap the Back arrow to exit. Accessing the Trip Computer The trip computer records your average speed, the time in hours of the trip, the time in hours that you were driving, and the distance of the trip. This information can be saved to a file for easy access when the information is needed. 1. From page 2 of the Main Menu, tap User Options. 2. Tap Trip Computer. 3. Select the Current Trip or a Saved Trip from the list. 4. Select Stop to stop recording information. Select Reset to set all the information to zero. Select Reset when you are starting a trip or route that you want to record details for. Current Trip Computer Select Save to store the trip computer information to a file. You will be prompted to enter a name for the file. Input a name and tap OK. 5. User Options Tap the Back arrow to exit. 47 Selecting POIs to be Displayed on the Map In some areas the map can be cluttered with POIs making it difficult to find what you are looking for. Use POI Selection to set what categories of icons will be shown and which ones will be hidden. 1. From page 2 of the Main Menu, tap User Options. 2. Tap POI Selection. 3. Tap on the POI category in the list to toggle its display setting on or off. (Checked POIs will be displayed. Tap Mark All to check all POI categories. Tap Clear All to uncheck all POI categories. 4. Tap Save to save changes and exit. POI Selection Screen Deleting Addresses from the Address Book (Global) The chapter on addresses discusses how to delete individual addresses from the address book. Address Book Options provides a way of globally deleting addresses from the address book. 1. From page 2 of the Main Menu, tap User Options. 2. Tap Address Book Options. 3. Tap Clear Addresses to delete all of the addresses in your Address Book. Tap Clear Favorites to delete only those addresses marked as Favorites from your Address Book. Tap Clear Previous to delete previous destinations from the Address Book. 4. Tap the Back arrow to exit. Setting the Map in 3D or 2D Mode See the chapter on Maps for information regarding 3D and 2D modes of the map. 1. From page 2 of the Main Menu, tap User Options. 2. Tap Map Options. 3. Select 3D Map or 2D Map. 4. Tap Save to record the changes and exit. User Options 48 Setting the Map Display to Heading Up or North Up The map can be displayed with the top of the display in the direction of your heading or North. 1. From page 2 of the Main Menu, tap User Options. 2. Tap Map Options. 3. Select Heading Up or North Up. (Note, North Up is available only when the map is set to 2D mode.) 4. Tap Save to record the changes and exit. Setting Split Screen (TrueView™) Options As you approach a maneuver, the display changes to the split screen mode. Under Map Options you can turn off the split screen or set it to be just the TrueView portion of the split screen. 1. From page 2 of the Main Menu, tap User Options. 2. Tap Map Options. 3. Tap Auto TrueView to turn set it to on or off. (Checked is on and the TrueView image will be displayed.) 4. Tap Split TrueView to set the TrueView display to split or single view. (Checked sets split screen on.) TrueView Split Screen 5. TrueView Single Screen Tap Save to record the changes and exit. Setting Auto Night Map Display Normally the map is displayed in the pastel colors for daytime use and a black background for nighttime use. Unchecking the Auto Night Mode will keep the map display using the pastel colors. 1. From page 2 of the Main Menu, tap User Options. 2. Tap Map Options. 3. Tap on Auto Night Mode. (Checked indicates that the map will automatically change to night colors; unchecked and the map will always use the day colors.) Note: If the screen has User Options 49 already switched to night colors, unchecking the box will not cause the display to go to the day colors. The switch to day colors will occur the following morning and then stay in day colors.) 4. Tap Save to record the changes and exit. Setting Detour Options Normally the map is displayed in the pastel colors for daytime use and a black background for nighttime use. Unchecking the Auto Night Mode will keep the map display using the pastel colors. 1. From page 2 of the Main Menu, tap User Options. 2. Tap Detour Options. 3. Select the default for the distance to be used to detour around traffic problems while routing. Set the alert timer. (Enter the time from the keypad.) Check Enable automatic detour on or off. (Checked is on and the Magellan RoadMate will automatically offer detour routing when it computes you are stuck in slow or stopped traffic situations.) 4. Detour Options Screen Tap Save to record the changes and exit. Using the Simulator When turned on, the simulator will offer the option of simulating movement on a route. Useful for learning about the Magellan RoadMate while not driving. 1. From page 2 of the Main Menu, tap User Options. 2. Tap Simulator Mode. 3. Tap Propose simulator mode when calculating route. When checked, the Magellan RoadMate will ask if you want the route simulated when it is created. Simulation mode will ignore actual movement and should only be used for training purposes. Tap on the speed factor desired. Tap <<1mi or 1m>> to set the route forward or backwards 1 mile. Simulator Mode Screen Tap Restart to begin the route you are currently simulating back to the beginning. User Options 50 Tap Stop to end simulating the current route you are simulating. (The Simulate button is presently not active.) 4. Tap Back arrow to record the changes and exit. Setting Tone Options Provides a way of selecting the tone used to announce arrival at a maneuver or destination. 1. From page 2 of the Main Menu, tap User Options. 2. Tap Tone Options. 3. Select Bell, Chime or Beep. 4. Tap Save to record the changes and exit. Viewing Technical GPS Information This screen provides technical information about the satellites being used to compute the GPS position. 1. From page 2 of the Main Menu, tap User Options. 2. Tap GPS Options. 3. Tap GPS Status. PRN: pseudo random number that identifies the satellite AZ: Azimuth of the satellite EL: Satellite elevation SNR: Satellite signal-to-noise ratio TTFF: Time to First Fix (in seconds) 4. Tap Back arrow to exit. Setting the GPS Position Setting a GPS position is useful if you are not getting satellite information quickly because the Magellan RoadMate has travelled over 500 miles while turned off. Setting the GPS position will allow the Magellan RoadMate to compute which satellites are available and calculate the position quicker. 1. From page 2 of the Main Menu, tap User Options. 2. Tap GPS Options. 3. Tap Set GPS Position. 4. Follow the prompts to enter the address where you currently are. 5. Tap Done when finished entering the address. User Options 51 Backing Up and Restoring Data Backup and restore provides a way of storing the address book and other data to a SD/MMC card. When the data has been backed up, it can be restored at any time. Please note that when you restore from backed up data, address book and other data will be replaced with the data. The Magellan RoadMate cannot append backed up data to your existing data. Backing Up Data 1. From page 2 of the Main Menu, tap User Options. 2. Insert a SD or MMC card with available space into the SD slot of the Magellan RoadMate. Note that backing up data will overwrite any back up files on the SD or MMC card. 3. Tap Backup and Restore. 4. Tap Backup. 5. Confirm backup. Tap Yes. 6. Operation successful! Tap OK. 7. Tap Back arrow to exit. Restoring Data 1. From page 2 of the Main Menu, tap User Options. 2. Insert a SD or MMC card with available space into the SD slot of the Magellan RoadMate. Note that backing up data will overwrite any back up files on the SD or MMC card. 3. Tap Backup and Restore. 4. Tap Restore. 5. Confirm restore. Tap Yes. 6. Operation successful! Tap OK. 7. Tap Back arrow to exit. Viewing Map Information 1. User Options From page 2 of the Main Menu, tap User Options. 52 2. Tap Map Information. 3. Tap Back arrow to exit. Map Information Screen User Options 53 Magellan® RoadMate™ 1400 ................; Thank you for purchasing a Magellan GPS navigation system. If you experience any technical difficulties or have any questions on its use, please log onto our support page at www.magelianGPS.comlsupportl. If you are still unable to resolve your problem, you may contact our Technical Support Dept. (toll-free 800.707.9971 - 6 am to 5 pm PST/PDT). Please do not return this product to the place of purchase. Merci d'avoir choisi un systeme de navigation GPS Magellan. Si vous rencontrez des difficultes techniques ou si vous avez des questions concernant son fonctionnement, merci de visiter la section support de notre site http://www.magelianGPS.comlsupportl. Si vous ne trouvez pas la reponse a votre question, vous pouvez contacter notre Support Technique (appel gratuit 800.707.9971 de 6 a.m a 5 p.m PST/PDT). Merci de ne pas retourner cet appareil a son lieu d'achat. Agradecemos que haya comprado el sistema de navegaci6n Magellan GPS Si experimenta dificultades tecnicas 0 tiene preguntas sobre su uso, entre a la pagina de soporte en www.magelianGPS.comlsupportl. Si aun asf no puede resolver el problema, comuniquese con el Departamento de Soporte Tecnico (liamada sin costo al 800.707.9971, de 6:00 a.m. a 5:00 p.m., hora normal del pacifico). No devuelva este producto al lugar de compra. [ WWW.MAGELLANGPS.COM/SUPPORT/ ] Part #606-0007-001A Magellan Warranty All Magellan global positioning system (GPS) receivers are navigation aids, and are not intended to replace other methods of navigation. Purchaser is advised to perform careful position charting and use good judgment. READ THE USER GUIDE CAREFULLY BEFORE USING THE PRODUCT. 1. MAGELLAN WARRANTY Magellan warrants its GPS receivers and hardware accessories to be free from defects in material and workmanship and will conform to its published specifications for the product for a period of one year from the date of original purchase. TH IS WARRANTY APPLI ES ONLY TO THE ORIGINAL CONSUMER PURCHASER OF THIS PRODUCT, In the event of a defect, Magellan wi II, at its option, repair or replace the hardware product with a product of like kind or quality, which may be new or reconditioned, with no charge to the purchaser for parts or labor. Magellan's limit of liability under the limited warranty shall be the actual cash value of the product at the time the purchaser returns the product to Magellan for repair less a reasonable amount for usage, as determined by Magellan in its sole discretion. The repaired or replaced product will be warranted for 90 days from the date of return shipment, or for the balance of the original warranty, whichever is longer. Magellan warrants that software products or software included in hardware products will be free from defects in the media for a period of 30 days from the date of shipment and will substantially conform to the then current user documentation provided with the software (including updates thereto), Magellan's sole obligation shall be the correction or replacement of the media or the software so that it will substantially conform to the then- current user documentation. Magellan does not warrant the software will meet purchaser's requirements or that its operation wi II be un interrupted, error-free or virus-free. Purchaser assumes the entire risk of using the software. 2. PURCHASER'S REMEDY PURCHASER'S EXCLUSIVE REMEDY UNDER THIS WRITTEN WARRANTY OR ANY IMPLIED WARRANTY SHALL BE LIMITED TO THE REPAIR OR REPLACEMENT, AT MAGELLAN'S OPTION, OF ANY DEFECTIVE PART OF THE RECEIVER OR ACCESSORIES WH ICH ARE COVERED BY THIS WARRANTY. REPAIRS UNDER THIS WARRANTY SHALL ONLY BE MADE AT AN AUTHORIZED MAGELLAN SERVICE CENTER. ANY REPAIRS BY A SERVICE CENTER NOT AUTHORIZED BY MAGELLAN WILL VOID THIS WARRANTY. 3. PURCHASER'S DUTIES To obtain service on a Magellan product the purchaser must obtain a Return Materials Authorization (RMA) number from Magellan Technical Support or by submitting a repair request through our website at www.magellanGPS.com.prior to shipping. The purchaser must return the product postpaid with a copy of the original sales receipt, purchaser's return address and the RMA number clearly printed on the outside of the package to the Authorized Magellan Service Center address provided by Magellan with the RMA number. Magellan reserves the right to refuse to provide service free-ofcharge if the sales receipt is not provided or if the information contained in it is incomplete or illegible or if the serial number is altered or removed. Magellan will not be responsible for any losses or damage to the product incurred while the product is in transit or is being shipped for repair. Insurance is recommended. Magellan suggests using a trackable shipping method such as UPS or FedEx when returning a product for service. 4. LIMITATION OF IMPLIED WARRANTIES Except as set forth in item 1 above, all other expressed or implied warranties, including those of fitness for any particular purpose or merchantability, are hereby disclaimed AND IF APPLICABLE, IMPLIED WARRANTIES UNDER ARTICLE 35 OF THE UNITED NATIONS CONVENTION ON CONTRACTS FOR THE INTERNATIONAL SALE OF GOODS. Some national, state, or local laws do not allow limitations on implied warranty on how long an implied warranty lasts, so the above limitation may not apply to you. 5. EXCLUSIONS The following are excluded from the warranty coverage: (1) periodic maintenance and repair or replacement of parts due to normal wear and tear; (2) batteries; (3) finishes; (4) insta lIations or defects resu Iti ng from installation; (5) any damage caused by (i) shipping, misuse, abuse, negligence, tampering, moisture, liquids, proximity or exposure to heat, or improper use; (ii) disasters such as fire, flood, wind, and lightning; (iii) unauthorized attachments or modification; (6) service performed or attempted by anyone other than an autho- rized Magellan Service Center; (7) any product, components or parts not manufactured by Magel- lan, (8) that the receiver will be free from any claim for infringement of any patent, trademark, copyright or other proprietary right, including trade secrets (9) any damage due to accident, resulting from inaccurate satellite transmissions. Inaccurate transmissions can occur due to changes in the position, health or geometry of a satellite or modifications to the receiver that may be required due to any change in the GPS. (Note: Magellan GPS receivers use GPS or GPS+GLONASS to obtain position, velocity and time information. GPS is operated by the U.S. Government and GLONASS is the Global Navigation Satellite System of the Russian Federation, which are solely responsible for the accuracy and maintenance of their systems. Certain conditions can cause inaccuracies which could require modifications to the receiver. Examples of such conditions include but are not limited to changes in the GPS or GLONASS transmission.). Opening, dismantling or repairing of this product by anyone other than an authorized Magellan Service Center will void this warranty. 6. EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES MAGELLAN SHALL NOT BE LIABLE TO PURCHASER OR ANY OTHER PERSON FOR ANY INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES WHATSOEVER, INCLUDING BUT NOT L1M- ITED TO LOST PROFITS, DAMAGES RESULTING FROM DELAY OR LOSS OF USE, LOSS OF OR DAMAGES ARISING OUT OF BREACH OF THIS WARRANTY OR ANY IMPLIED WARRANTY EVEN THOUGH CAUSED BY NEGLIGENCE OR OTHER FAULT OF MAGELLAN OR NEGLIGENT USAGE OF THE PRODUCT. IN NO EVENT WILL MAGELLAN BE RESPONSIBLE FOR SUCH DAMAGES, EVEN IF MAGELLAN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Some national, state, or local laws do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. 7. COMPLETE AGREEMENT This written warranty is the complete, final and exclusive agreement between Magellan and the purchaser with respect to the quality of performance of the goods and any and all warranties and representations. THIS WARRANTY SETS FORTH ALL OF MAGELLAN'S RESPONSIBILITIES REGARDING THIS PRODUCT. THIS WARRANTY GIVES YOU SPECIFIC RIGHTS. YOU MAY HAVE OTHER RIGHTS WHICH VARY FROM LOCALITY TO LOCALITY AND CERTAIN LIMITATIONS CONTAINED IN THIS WARRANTY MAY NOT APPLY TO YOU. If any part of this limited warranty is held to be invalid or unenforceable, the remainder of the limited warranty shall nonetheless remain in full force and effect. 8. CHOICE OF LAW. This limited warranty is governed by the laws of the State of California, without reference to its conflict of law provisions or the U.N. Convention on Contracts for the Internationa I Sale of Goods, and shall benefit Magellan, its successors and assigns. This warranty does not affect the consumer's statutory rights under applicable laws in force in their locality, nor the customer's rights against the dealer arising from their sales/purchase contract. For further information concerning this limited warranty, please visit Magellan's website www.magellangps.com or call our customer support: Toll Free 1.800.707.9971, or from outside the US: 1.909.394.5000. READ CAREFULLY BEFORE OPENING THE SEALED DISK PACKAGE, INSTALLING THIS PROGRAM OR USING THE DEVICE. Magellan Navigation, Inc., End-User License Agreement This End-User License Agreement (this "Agreement") is made by and between Magellan Navigation, Inc. and its affiliates ("Magellan") and end-user of the Software ("Customer"). By clicking the acceptance button or installing the Software, Customer agrees to be bound by all of the terms and conditions of this Agreement provided with the Software, including the use restrictions, warranty disclaimer and limitation of liability set forth therein. If Customer does not agree to be bound by all of the terms and conditions of this Agreement, Customer must immediately stop installation and! or use of the Software, where appl icable, and return the Software to Magellan at: (for Americas, Asia & Pacific) Magellan Customer Support, 960 Overland Court, San Dimas, CA 91773, USA (for Europe, Midd Ie East & Africa) Magellan Customer Support, Z.A.C. de la Fleuriaye, B.P. 6043344474 Carquefou Cedex, France I.Grant of License to Software. Magellan hereby grants to Cus- . tamer a non-exclusive, personal and non-assignable license to install, operate and use the Magellan software product covered by th is Agreement CSoftware and use the documentation provided with the same (IIDocumentation subject to the following restrictions: ll ) ll ), (i) Customer shall use the Software for non-commercial purposes only and on a single computer owned or leased by Customer, provided that Customer may transfer the Software from one computer to another so long as the Software is operated on lyon one (1) computer at any time; (i i) Customer sha II use the Software solely to down load data from that computer for use solely with a single Magellan fami Iy handheld GPS receiver, and shall not sell, trade, lease, rent or hire out the Software to any th ird party or otherwise act as a service bu reau (which restriction, for the avoidance of doubt, shall extend to any situation in which Customer becomes subject to any bankruptcy or insolvency laws or otherwise makes any assignment for the benefit of its creditors); (iii) Customer shall not modify, reverse engineer, decompile or disassemble or create derivative works of the Software; (iv) Customer shall not copy the Documentation; and (v) Customer shall not remove or obscure the copyright, trademark notice, restrictive legend or any other proprietary rights or notices included within the Software and on and in any documentation and training materials. Magellan (and, where applicable, its third party suppliers) retain all rights to the Software and any software program(s) embedded into same and supplied by Magellan under license from third party suppliers, including NAVTEQ North America, LLC and Tele Atlas N.V. ("Third Party Software"), not expressly granted to Customer under th is Agreement. 2.Third Party Software. Customer acknowledges that certain Third Party Software may be em bedded in the Software. As such, Customer may be required in connection with its use of the Software to agree to the terms and cond itions the applicable third party supplier requires of its end users. For installable and/or downloadable Software, such terms and conditions may require additional steps for Customer to manifest consent. For boxed software, Customer shall be provided with copies of such terms and cond itions and is required to review and comply with same. In any event, Customer acknowledges and agrees that its rights to and use of each item of Third Party Software shall be subject to the terms and conditions governing the same. 3.Copies of Software. Customer shall have the right to make one (1) copy of the Software for arch ivai and backup purposes, provided that such copy shall also reproduce all copyright and intellectual property rights notices found on the original. 4.0wnership of Software and Certain Intellectual Property Rights. The Iicense granted to Customer under Section 1 is not a sale of the Software. The Software, Third Party Software and Documenta- tion are copyrighted works of authorship and contain valuable secret and confidential information proprietary to Magellan and its third party suppliers, as applicable. Any and all intellectual property rights in or to the Software and Documentation shall be and remain the sole property of Magellan, and any and all intellectual property rights in or to any Third Party Software shall be and remain the sole property of the applicable third party supplier. Customer shall exercise due care in connection with the use, storage and copyi ng of the Software and wi II treat the Software, Th ird Party Software and the Documentation with the same degree of care that it uses for its own confidential information. For the avoidance of doubt, as between Customer and Magellan, Magellan shall retain exclusive use and ownership of all trademarks related to the Software. 5.Disclaimer of Warranties. MAGELLAN AND ITS THIRD PARTY SUPPLIERS MAKE NO WARRANTIES OR REPRESENTATIONS, EXPRESS OR IMPLIED, REGARDING THE SOFTWARE, THIRD PARTY SOFTWARE, MEDIA, DOCUMENTATION, RESULTS OR ACCURACY OF DATA AND HEREBY EXPRESSLY DISCLAIM ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT. THE SOFTWARE AND THIRD PARTY SOFTWARE ARE PROVIDED ON AN liAS IS" AND liAS AVAILABLE" BASIS, AND MAGELLAN AND ITS THIRD PARTY SUPPLIERS DO NOT WARRANT THAT THE SOFTWARE WILL MEET CUSTOMER'S REQUIREMENTS OR THAT ITS OPERATION WILL BE UNINTERRUPTED OR ERROR-FREE. 6. Warn ing. The Software reflects cond itions as they existed at various points in time before Customer purchased its copy of the Software. Accordingly, the Software may contain inaccurate or incomplete data or information due to the passage of time, road construction and changi ng cond itions or otherwise. The Software does not include, analyze, process, consider or reflect any of the following: legal restrictions (such as vehicular type, weight, height, width, load and speed restrictions); road slope or grade; bridge height, width, weight or other limits; population density; neighborhood qual ity or safety; avai labi Iity or proxi mity of law enforcement, emergency rescue, medical or other assistance; construction work zones or hazards; road or lane closures; road, traffic or traffic facili- ties safety or cond ition; weather cond itions; pavement characteristics or conditions; special events; traffic congestion; travel time. 7. Limitation of Liability. IN NO EVENT SHALL MAGELLAN OR ITS THI RD PARTY SUPPLIERS BE LIABLE UNDER TH IS AGREEMENT OR OTHERWISE TO CUSTOMER OR ANY THIRD PARTY FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, INDIRECT OR PUNITIVE DAMAGES, INCLUDING LOSS OF PROFITS OR SAVINGS, LOSS OF BUSINESS, BUSINESS INTERRUPTION, LOSS OF USE, DAMAGE TO OR REPLACEMENT OF EQUIPMENT AND PROPERTY, OR RECOVERY OR REPLACEMENT OF PROGRAMS OR DATA ARISING FROM CLAIMS BASED IN WARRANTY, CONTRACT, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY, OR OTHERWISE EVEN IF MAGELLAN OR ITS THIRD PARTY SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH CLAIMS OR DAMAGES. The total liability of Magellan under this Agreement, whether arising from negligence or willful misconduct of Magellan, its employees, officers or other agents, and under contract, tort or any other theory of liability, for any reasons, including with respect to (i) death or injury to persons, or (ii) physical loss or damage to property, shall be Iimited to the amount of damages foreseeable at the time of entering into this Agreement, which in no event shall exceed one hundred dollars ($100). 8.Term and Termination 8.1 Term. This Agreement shall remain in full force and effect in perpetuity, except that this Agreement shall immediately and automatically terminate in the event that (i) Customer materially breaches this Agreement or (ii) Customer becomes bankrupt or insolvent under the bankruptcy laws of the United States or other govern menta I authority. 8.2Effect of Termination. Upon any termination of this Agreement by Magellan, all rights granted to Customer hereunder shall immediately terminate, and Customer shall delete and/or destroy all Software, Third Party Software and Documentation and any copies thereof. 8.3Remedies not Limited. The exercise of any termination right under th is Artic Ie 8 by Magellan shall not lim it or prejud ice any right of Magellan to recover damages or other rights or remedies, or give rise to any right or recovery by Customer. 9.lndemnification. Customer shall indemnify Magellan and its third party suppliers against any claims related to Customer's use of the Software, Third Party Software and Documentation, including clai ms for loss of data and busi ness interru ption. 10. General Provisions lO.lForce Majeure. Neither Customer nor Magellan shall be liable in any circumstances for failure to perform under this Agreement where such failure is due to a cause beyond such party's reasonable control. lO.2Notices. Any notices required or permitted to be given hereunder to Magellan, or any other communications related hereto, shall be sent to the appropriate Magellan address set forth on the first page of this Agreement by internationally-recognized overnight courier and shall be deemed received seventy-two (72) hours following the posting of the same. lO.3Confidentiality. Any information disclosed by Magellan to Customer shall be held by Customer in confidence and not disclosed, and Customer shall treat such information with the same care with which it treats its own confidential information, and shall use commercially reasonable efforts to ensure that such information is not disclosed to a third party in any manner except with the prior written consent of Magellan, except where such information is required to be disclosed by court order or applicable law or becomes publicly known through no fault of Customer. lO.4Entire Agreement; No Waiver. This Agreement represents the entire understanding of the parties with respect to the subject matter hereof, and supersedes any other prior understanding of the parties, whether written or oral. No amendment, alteration or waiver of this Agreement shall be effective unless made in writing and signed by both parties. lO.5Governing Law. This Agreement shall be governed and construed in accordance with the laws of the State of Cal iforn ia, United States, without regard to its confl icts of law pri nciples and without regard to the United Nations Convention on Contracts for the International Sale of Goods. The parties shall attempt to resolve any disputes arising under this Agreement in good faith. lO.6Construction and Severability. In the event any portion of this Agreement is determined to be invalid or unenforceable by a court of competent jurisdiction, the remainder of this Agreement shall remain in effect and such provision shall be replaced with a valid and enforceable provision with an effect as close as possible to the invalid or unenforceable provision. As used in this Agreement, the terms lIinclude li and its correlative terms shall be deemed to be terms of example and not limitation. lO.7lnjunctive Relief. Magellan shall have the right to enforce the terms and conditions of this Agreement by equitable relief where applicable, including injunctive relief and specific performance, without the necessity of posti ng a bond. lO.8Assignment. Customer shall have no right to assign or transfer all or any portion of this Agreement by operation of law or otherwise (including by merger, acquisition, consolidation or sale of all or substantially all assets of Customer). 10.9 Export Control. Customer agrees not to export from anywhere any part of the Software, including Third Party Software, provided to Customer or any direct product thereof, except in compliance with, and with all licenses and approvals required under, applicable export laws, ru les and regu lations. lO.lOGovernment End Users. If the Software is being acquired by or on behalf of the United States government or any other entity seeking or applying rights similar to those customarily claimed by the United States government, Customer shall contact Magellan at the appropriate Magellan address set forth on the first page of this Agreement for a copy of the additional terms and conditions governing such Customer's use. ">
/
Lataa
Ystävällinen muistutus. Voit tarkastella dokumenttia täällä. Mutta mikä tärkeintä, tekoälymme on jo lukenut sen. Se voi selittää monimutkaisia asioita yksinkertaisesti, vastata kysymyksiisi millä tahansa kielellä ja auttaa sinua navigoimaan nopeasti jopa pisimmissä tai monimutkaisimmissa dokumenteissa.
Julkinen linkki päivitetty
Chattisi julkinen linkki on päivitetty. You may view and manage your chat links after registration here.
Dokumentin julkinen linkki
Mainos