advertisement
NEW FEATURE
"ONE TIME ACCESS FOR
GROUP 3 USERS"
ADDENDUM
OVERVIEW
Your T3e Series lock now includes a new feature named "One Time Access for
Group 3 Users", allowing the creation of multiple 'one time only' User Codes.
When this feature is activated, an entry by a Group 3 User will allow entry only once, then the user will become disabled. Note: When the User Code is entered for the first time and access is granted, the Event Log will read "Entry" followed by
"User Disabled". If the User Code is entered a second time, access will be denied, and the Event Log will read "User Denied Access".
TO ACTIVATE VIA THE KEYPAD
To use this new feature, proceed as follows:
1. Enable the Feature . Enter Program Mode and enter the key
sequence ; 6 7 ; 2 4 : .
2. Assign the selected User Codes to Group 3 . For example, to assign
User Number 15 to Group 3, press:
; 3 5 ; 1 5 ; 3 :
TO ACTIVATE VIA DL-WINDOWS (V3.03 or later)
DL-Windows provides a check box on the Features screen (click the Feat button, click the Options tab, and check "One Time Only For Group 3 Users"). Note: If this option is programmed via the keypad, downloading from versions of DL-
Windows prior to V3.03 will not alter the operation of this feature.
TO DEACTIVATE VIA THE KEYPAD
As with all ; 6 7 ; commands, this feature can be disabled by entering the following key sequence:
; 6 7 ; 0 0 0 :
345 Bayview Avenue
Amityville, New York 11701
For Sales and Repairs 1-800-ALA-LOCK
For Technical Service 1-800-645-9440
© ALARM LOCK 2004 WI1266 2/04
NEW FEATURE
"ONE TIME ACCESS FOR
GROUP 3 USERS"
ADDENDUM
OVERVIEW
Your T3e Series lock now includes a new feature named "One Time Access for
Group 3 Users", allowing the creation of multiple 'one time only' User Codes.
When this feature is activated, an entry by a Group 3 User will allow entry only once, then the user will become disabled. Note: When the User Code is entered for the first time and access is granted, the Event Log will read "Entry" followed by
"User Disabled". If the User Code is entered a second time, access will be denied, and the Event Log will read "User Denied Access".
TO ACTIVATE VIA THE KEYPAD
To use this new feature, proceed as follows:
1. Enable the Feature . Enter Program Mode and enter the key
sequence ; 6 7 ; 2 4 : .
2. Assign the selected User Codes to Group 3 . For example, to assign
User Number 15 to Group 3, press:
; 3 5 ; 1 5 ; 3 :
TO ACTIVATE VIA DL-WINDOWS (V3.03 or later)
DL-Windows provides a check box on the Features screen (click the Feat button, click the Options tab, and check "One Time Only For Group 3 Users"). Note: If this option is programmed via the keypad, downloading from versions of DL-
Windows prior to V3.03 will not alter the operation of this feature.
TO DEACTIVATE VIA THE KEYPAD
As with all ; 6 7 ; commands, this feature can be disabled by entering the following key sequence:
; 6 7 ; 0 0 0 :
345 Bayview Avenue
Amityville, New York 11701
For Sales and Repairs 1-800-ALA-LOCK
For Technical Service 1-800-645-9440
© ALARM LOCK 2004 WI1266 2/04
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project