USB LAN ISDN

Quick Installation Guide

M73-APO08-360

Table of Contents

PARTS NAMES AND FUNCTIONS.................1

HARDWARE INSTALLATION........................2

I NSTALLING THE USB LAN ISDN.....................2

Connecting the USB Cabling ........................2

Connecting to an ISDN Network...................2

Connecting to the LAN Network....................2

SOFTWARE INSTALLATION .........................3

W INDOWS 98SE I NSTALLATION .........................3

W INDOWS 2000 I NSTALLATION .........................9

W INDOWS ME I NSTALLATION .........................12

W INDOWS XP I NSTALLATION ..........................16

Parts Names and Functions

1. USB Cable: connects the USB LAN ISDN to the USB host port of your computer.

2. USB Port: connects to the USB cable’s square end.

3. LAN Port: connects to a LAN Cable.

4. ISDN Port: connects to an ISDN Cable.

5. Link Indicator: glows green when

10/100M Fast Ethernet is linked.

6. B1 Indicator: glows green when the transmitting / receiving data in 64 Kbps speed mode. transmitting / receiving data in 128 Kbps speed mode.

- 1 -

HARDWARE INSTALLATION

Installing the USB LAN ISDN

Connecting the USB Cabling

1. Insert the USB cable’s square end into the adapter’s USB port.

2. Insert the rectangular end of the USB cable into the USB host port on your PC.

Connecting to an ISDN Network

1. Connect one end of an ISDN cable into the adapter’s ISDN port.

2. Connect the other end of the ISDN cable into S/T port on NT1 ISDN device.

Connecting to the LAN Network

1. Connect one end of the LAN cable into the adapter's LAN port.

2. Connect the other end of the LAN cable to a Hub.

- 2 -

SOFTWARE INSTALLATION

Windows 98SE Installation

1. Once the device is connected, windows

98SE will automatically detect the device and appear the following figure. Click Next to continue. device (Recommended) and click Next .

3. Insert the device driver into your CD-ROM.

Select Specify a location , direct Windows

98SE to the location where the driver stored

(e.g. E:\USB ) and click Next.

Windows

98SE will search for the suitable driver for the software installation need.

4. Click Windows 98SE will start copying necessary files onto your system.

- 3 -

5. In ISDN Configuration, click Next .

6. Select the switch protocol that your telephone company uses and click Next .

7. Enter the telephone numbers that your ISP provided and click Next .

- 4 -

8. Click .

9. Click to continue the software installation.

10. Windows 98SE will automatically detect the device and appear the following figure.

Follow the on-screen instructions.

- 5 -

device (recommended) and click Next.

12. Select , direct Windows

98SE to the location where the driver stored

(e.g. E:\USB ) and click Next.

Windows

98SE will search for the suitable driver for the software installation need.

13. Click Next.

Windows 98SE will start copying necessary files onto your system.

- 6 -

14. The installation program will proceed automatically. Click Finish .

15. When Windows prompts you to restart your computer, click Yes .

16. To verify if your network adapter exists in your computer and well enabled, you can perform the following steps.

17. Go to Æ Settings Æ Control Panel

Æ Systems Æ Device Manager.

adapters and Universal Serial Bus controllers to expand. If Intelligent CAPI

2.0 driver, Intelligent USB adapter,

Intelligent ISDN WAN miniport,

Intelligent USB 10/100 Network Adapter and Generic USB Hub are found, that means your network adapter exists and enabled. If not, consult your distributor for technical support.

- 7 -

- 8 -

Windows 2000 Installation

1. Once the device is connected, Windows 2000 will automatically detect the device and appear the following figure. Click Next to continue. device (Recommended) and click Next.

3. Select and click Next.

4. Insert the device driver into your CD-ROM.

Click Browse, direct Windows 2000 to the location where the driver stored (e.g.:

E:\USB ) and click OK.

5. Click Windows 2000 will start copying necessary files onto your system.

- 9 -

6. Click to continue.

7. Windows 2000 will automatically detect the device and appear the following figure.

Click Next to continue. device (recommended) and click Next.

9. Select and click Next.

10. Click direct Windows 2000 to the location where the driver stored (e.g.:

E:\USB ) and click OK.

11. Click Next.

Windows 2000 will start copying necessary files onto your system.

- 10 -

12. Click to continue.

13. Click Finish to complete the software installation.

14. To verify if your network adapter exists in your computer and well enabled, you can perform the following steps.

15. Go to Æ Settings Æ Control Panel

Æ Systems Æ Hardware Æ Device

Manager.

adapters and Universal Serial Bus controllers to expand. If Intelligent CAPI

2.0 driver, Intelligent USB adapter,

Intelligent ISDN WAN miniport,

Intelligent USB 10/100 Network Adapter and Generic USB Hub are found, that means your network adapter exists and enabled. If not, consult your distributor for technical support.

- 11 -

Windows ME Installation

1. Once the device is connected, Windows ME will automatically detect the device and appear the following figure. Insert the device driver into your CD-ROM drive, select Automatic search for… and click

Next. Windows ME will search for appropriate driver and copy necessary files onto your system. the windows appears, click Next.

appropriate and click Next.

- 12 -

the that your ISP provided and click Next.

5. Click .

- 13 -

6. Click to continue.

7. Windows ME will automatically detect the device and appear the following figure.

Select Automatic search for… and click

Next. Windows ME will search for appropriate driver and copy necessary files onto your system.

8. Click to complete the installation.

- 14 -

9. When Windows prompts you to restart your computer, click Yes .

10. To verify if your network adapter exists in your computer and well enabled, you can perform the following steps.

11. Go to Æ Settings Æ Control Panel,

Æ Systems Æ Hardware Æ Device

Manager.

adapters and Universal Serial Bus controllers to expand. If Intelligent CAPI

2.0 driver, Intelligent USB adapter,

Intelligent ISDN WAN miniport,

Intelligent USB 10/100 Network Adapter and Generic USB Hub are found, that means your network adapter exists and enabled. If not, consult your distributor for technical support.

- 15 -

Windows XP Installation

1. Once the device is connected, Windows XP will automatically detect the device and appear the following figure. Insert the device driver into your CD-ROM drive, select Install the software automatically… and click Next.

Windows XP will search for appropriate driver and copy necessary files onto your system.

2. Click

3. Click to continue.

4. Windows XP will automatically detect the device and appear the following figure.

Select Install the software automatically… and click Next.

5. Click

- 16 -

6. Click to complete the software installation.

7. To verify if your network adapter exists in your computer and well enabled, you can perform the following steps.

8. Go Start Æ Settings Æ Control Panel,

- 17 -

Æ Systems Æ Hardware Æ Device

Manager.

adapters and Universal Serial Bus controllers to expand. If Intelligent CAPI

2.0 driver, Intelligent USB adapter,

Intelligent ISDN WAN miniport,

Intelligent USB 10/100 Network Adapter and Generic USB Hub are found, that means your network adapter exists and enabled. If not, consult your distributor for technical support.

- 18 -