- Computers & electronics
- Audio & home theatre
- Remote controls
- Comcast
- Remote Control
- Manual de usuario
advertisement
Enjoy your
XFINITY
®
TV
Program your remote to get started.
It’s simple to program your remote.
Your remote is already programmed to control your digital adapter. To control your
TV, follow the steps below to program your remote.
HERE’S HOW:
1. Install the batteries.
2. Find the manufacturer’s code for your
TV (see other side).
3. Turn on your TV.
4. Press and hold the SET button until the
red light flashes twice, then release.
5. Enter the first manufacturer’s code
you found in step 2. The red light will
flash twice.
6. Press the POWER button. If the TV turns
off, make sure that the VOL+/ and MUTE
buttons also work. If so, you’re all set!
7. If not, repeat these steps using the
next manufacturer’s code (you may
need to try several codes to find the
one that works). If you still can’t find a
code that works, see the “Can’t Find
Your Code?” section.
CAN’T FIND YOUR CODE?
If you can’t program your remote using the codes on the back, follow the steps below.
1. Turn on your TV.
2. On your remote, hold SET until the red
light flashes twice, then release.
3. Enter 9-9-1 and the red light will
flash twice.
4. Press CH+
turns off.
multiple times until the TV
5. Once the TV turns off, press SET .
Digital Transport Adapter
Remote Control
USER’S GUIDE
SAVE YOUR TV CODE
For future reference, write the valid manufacturer’s code for your TV here:
xfinity.com/remotes
Troubleshooting
Q. Why does the red light display one
long flash during programming?
A. You may have entered the wrong code. Check the code and try programming again.
Q. Why does my red light flash, but
there is no response when I press
a key?
A. Make sure the remote control is aimed at your home entertainment device and is no further than 15 feet away. Also, make sure your Digital
Transport Adapter or IR Extender is in plain sight.
Q. Why isn’t the audio in the right
language?
A. You may need to press the language
( LANG ) button to change to your
preferred language.
Q. Why isn’t there any volume or sound?
A. Try pressing the MUTE button to restore
sound. If that doesn’t work, press the
LANG button.
Here’s what your remote can do.
Esto es lo que tu control remoto puede hacer.
SET: Programs your remote to control your TV.
Indicator light: Flashes red during programming sequences and when any key is pressed.
POWER: When programmed, turns your
TV on or off (it will not turn off your DTA, which is always on).
INFO: Displays the current channel number and station call letters.
To find FAQs and additional support, visit xfinity.com/remotes
Keypad (0-9): Select the channel you want to view (e.g., 0-9 or 0-2-5 ).
ENTER: Tunes directly to a channel
(e.g., 1-0-9 ENTER ).
LAST: Goes back to the last channel viewed.
SET: Programa tu control remoto para controlar tu televisor.
Luz indicadora: Luz roja que parpadea durante las secuencias de programación y al oprimir cualquier tecla.
POWER: Cuando está programado, enciende o apaga tu televisor (no apagará tu DTA, que siempre permanece encendido).
INFO: Muestra el número del canal y las letras de la estación que estés viendo en ese momento.
Teclado numérico (0-9): Selecciona el canal que deseas ver (ej., 0-9 ó 0-2-5 ).
ENTER: Sintoniza un canal directamente
(ej., 1-0-9 ENTER ).
LAST: Regresa al último canal que se vio en el televisor.
Digital Transport Adapter
Remote Control
USER’S GUIDE
¡Disfruta de
XFINITY
®
TV ahora mismo!
Programa tu control remoto para comenzar.
Programar tu control remoto es sencillo.
Tu control remoto ya está programado para controlar tu adaptador digital. Para controlar tu TV, sigue los pasos de abajo para programar tu control remoto.
ASÍ ES COMO SE HACE:
1. Instala las baterías.
2. Localiza el código del fabricante de tu
televisor (ver al dorso).
3. Enciende tu televisor.
4. Oprime y sostén el botón SET hasta
que la luz roja parpadeé dos veces;
entonces, suéltalo.
5. Ingresa el primer código del fabricante
que encontraste en el paso 2. La luz roja
parpadeará dos veces.
6. Oprime el botón POWER.
Si el televisor
se apaga, asegúrate de que los botones
VOL+/- y MUTE también estén funcionando.
Si funcionan, ¡ya has terminado!
7. Si no, repite estos pasos usando el
siguiente código del fabricante listado
(es posible que debas probar diferentes
códigos hasta encontrar el que funcione).
Si aún no puedes encontrar un código
que funcione, consulta la sección
“¿No encuentras tu código?”.
¿NO ENCUENTRAS TU
CÓDIGO?
Si no puedes programar tu control remoto con los códigos al dorso, sigue los pasos de abajo.
1. Enciende tu televisor.
2. En tu control remoto, sostén el botón SET
hasta que la luz roja parpadeé dos veces;
entonces suéltalo.
3. Teclea 9-9-1 y la luz roja parpadeará dos
veces.
4. Oprime CH+ varias veces hasta que se
apague el televisor.
5. Una vez que se apague el televisor,
Adaptador de Transporte Digital
Control Remoto
GUÍA DEL USUARIO
Para referencia futura, escribe aquí el código del fabricante de tu televisor:
Adaptador de Transporte Digital
Control Remoto
GUÍA DEL USUARIO
Solución de anomalías
P. ¿Por qué la luz roja emite un solo
parpadeo largo durante el proceso
de programación?
R. Es probable que hayas ingresado el
código equivocado. Asegúrate de ingresar
el código adecuado y vuelve a intentar
programar.
P. ¿Por qué la luz roja parpadea,
pero no hay respuesta cuando oprimo
una tecla?
R. Asegúrate de apuntar el control remoto
hacia tu aparato de entretenimiento y
de no estar a más de 15 pies de distancia
del mismo. También, asegúrate de que
tu adaptador de transporte digital o extensor
infrarrojo estén a plena vista.
P: ¿Por qué el audio no está en el idioma
correcto?
R. Es probable que debas oprimir el botón
de idioma (LANG) para cambiar al idioma
de tu preferencia.
P. ¿Por qué no hay volumen ni sonido?
R. Prueba oprimir el botón MUTE (silen
ciar) para reestablecer el sonido. Si
eso no funciona, oprime el botón
LANG (idioma).
Para leer más preguntas frecuentes y obtener ayuda adicional, visita xfinity.com/remotes
VOL+/– : Turns the volume up and down on the digital adapter. Once your remote is programmed, these keys operate the TV’s volume control.
MUTE: Turns the sound on and off.
CH+/– : Selects the next higher or lower channel.
LANG: Switches between languages and audio options for each channel. If no audio option is available, it may mute the channel. (If you don’t hear sound, press the MUTE button to restore sound.
If that doesn’t work, press the
LANG button.)
VOL+/– : Sube y baja el volumen en el adaptador digital. Una vez programado tu control remoto, estas teclas operan el control de volumen del televisor.
MUTE: Enciende y apaga el sonido.
CH+/– : Selecciona el siguiente canal hacia arriba o hacia abajo.
LANG: Alterna entre idiomas y opciones de audio para cada canal. Si no hay una opción de audio disponible, esto puede silenciar el canal. (Si no escuchas ningún sonido, oprime el botón MUTE para reestablecerlo. Si eso no funciona, oprime el botón LANG ).
SETUP CODES FOR TVS
CÓDIGO DE CONFIGURACIÓN PARA TELEVISORES
3M 10737, 11616, 11655
A-Mark 10003
Abex 10032
Aiko 10092
Accurian 11803
Action 10873
Admiral
Advent
10093, 10463
10761, 10783, 10815, 10817,
10842, 11933
Adventura 10046
Aftron 10891
Aiko 10092
Aiwa
Akai
Alaron
10701, 11914
10812, 11675, 10060, 10702,
10030, 10098, 10672, 11207,
11385,11676, 11688, 11689,
11692, 11935
10179, 10183, 10216
Albatron 10843
Ambassador 10177
America Action 10180
Ampro 10751
Anam 10180
Anam National
AOC
10055
10030, 11590, 11365
Aomni 11623
Apex Digital
Archer 10003
Astar
Audiovox
Aurora Systems
10156, 10748, 10879, 10765,
10890, 11217, 11991
11531, 11738
10451, 10180, 10092,
10003, 10802, 10846, 10875,
11284, 11951, 11952
10801
Aventura 10171
Belcor 10019
Bell & Howell
BenQ
10154, 10016
11032, 11315
Bradford 10180
Brillian 11007, 11257, 11258
Brockwood 10019
Broksonic 10236, 10463
Bush 10355
Byd:sign 11309
Cadia 11283
Candle
Canon
10030, 10046, 10056, 10186
10793, 11396
Carnivale 10030
Carver
Casio
CCE
10054, 10170
10611, 11205
10217, 10329
Celebrity 10000
Celera 10765
Changhong 10765
Cinego 11986
Citizen 10060, 10030, 10092, 10046,
10056, 10186, 10280, 10561,
11669, 11671, 11672, 11928,
11935
Clarion 10180
Classic 11984
Coby 12017
Commercial Solutions 10047
Compaq 10749
Concerto 10056
Contec 10180
Craig 10180
Crosley 10054
Crown 10180
Curtis Mathes 10047, 10054, 10154, 10451,
10093, 10060, 10702, 10030,
10145, 10166, 10016, 10056,
10466, 10747, 11919
CXC 10180
CyberHome 10794
Cytron
Daewoo
11326, 12003
10451, 10092, 10019, 10066,
10067, 10091, 10661, 10672,
11909, 11928
Daytron 10019
Dell 11264, 11080, 11178, 11403
Delta 11369
Denon 10145, 10511
Diamond Vision 11801, 11996
Digistar 11565
Digital Lifestyles 11765, 11822
Digital Projection Inc. 11482, 11725, 11726, 11750
Dream Vision 11297
Dumont 10017
Durabrand 10463, 10180, 10178, 10171,
11034, 10003
Dwin 10093, 10720, 10747, 10774
Dynatech 10049
Dynex 11463, 11780, 11785
Eiki 10735
Electroband 10000
Electrograph
Electrohome
11755, 11623
10463, 10446, 11570, 11670,
11672, 11760, 11761
Element 11687
Emerson 10154, 10451, 10236, 10463,
10180, 10178, 10171, 11963,
11928, 11913, 11911, 11909,
11905, 11665, 10282, 10280
10270, 10183, 10181, 10179
10177, 10038, 10019
11422, 11546, 11765
10030, 10813, 11365
Emprex
Envision
Epson 11122, 11290
Erae 11222
ESA
Fisher
10812, 10171, 11963
10154, 10159
Fujitsu 10179, 10186, 10683, 10853,
12008
Funai 10180, 10171, 10179, 11904,
11963
Futuretech 10180
Gateway
GE
Gibralter
Go Video
GoldStar
1032
11755, 11001, 11756
10047, 10051, 10451, 10178,
10021, 10027, 10029, 10055,
10135, 10279, 10282, 10747,
11907, 11919, 1192
10017, 10030, 10019
10886, 11823, 11831
10178, 10030, 10002, 10019,
Goodmans 10360
Gradiente 10392
Grundig 10683
Grunpy
H & B
Haier
10180, 10179
11366
11034, 10768, 11009
Hallmark 10178
Hanns.G 11783
Hannspree 11348, 11745, 11783
Harley Davidson 10043, 10179, 11904
Harman/Kardon 10054, 10078
Harvard 10180, 10068
Havermy 10093
Helios 10865
Hello Kitty 10451
Hewlett Packard 11494, 11088, 11089, 11101
Hisense
Hitachi
10748, 11660
10145, 12243, 12143, 11904,
11345, 10797, 10737, 10724,
10723, 10413, 10279, 10227,
10173, 10151, 10097, 10095,
10056, 10038, 10032, 10016
Hyundai 10849, 11219, 11294
I-Inc 11746 iLo 11286, 11603, 11665, 11684,
11990
Infinity 10054
InFocus 10736, 10738, 10741, 10781,
11516
Initial
Insignia
11603, 11990
10171, 11204, 11326, 11517,
11641, 11780, 11892, 11963,
12002
Inteq 10017
IX 10877
Janeil 10046
JBL 10054
JCB 10000
Jensen
11933
JVC
10761, 10050, 10817, 11299,
10053, 10036, 10160, 10169,
10731, 11349
Kamp 10216
Kawasho 10216, 10308
Kaypani 10052
KDS 11687
KEC 10180
Kenwood
KLH
Kloss
Knoll Systems
Konka
Kost
Kreisen
10030, 10019
10765, 10767
10024, 10046, 10078
10781
10632, 10638, 10707, 11385,
11831, 11939
11262, 11483
10876, 11474
KTV 10180, 10030, 10183, 10217,
10280
LG 11265, 10178, 10442, 10856,
11178, 11530, 11637, 11934
Lloyd’s 11904
Loewe 10136
Logik 10016
Luce 10837, 11031
Luxman 10056
LXI
Magnavox
10047, 10054, 10154, 10156,
10178, 10747
11866, 10054, 10030, 10706,
11990, 11963, 11913, 11904,
11525, 11365, 11198, 10802,
10230, 10187, 10186, 10179,
10096, 10036, 10028, 10024
Magnin 11907
Majestic
Marantz
Matsushita
Maxent
MB Quart
Megatron
Memorex
10015, 10016
10054, 10030, 10704, 10854,
11398, 11554
10250
11755, 11714, 11757
11868
10178, 10145, 10003
10154, 10463, 10150, 10178,
MGA
10016, 10179, 10877, 11570,
11911, 11920
10150, 10178, 10030, 10019,
10155, 11907
Micro 11436
Midland 10047, 10017, 10051, 10032,
10135, 10747
Mintek 11603, 11990
Minutz 10021
Mitsubishi 11250, 10093, 10150, 10178,
10014, 10019, 10098, 10155,
10331, 10358, 10592, 10836,
10868, 11278, 11392
Monivision 10843
Motorola 10093, 10055, 10835
Moxell 10835
MTC
Multitech
NAD
10060, 10030, 10019, 10049,
10056, 10091, 10216
10180, 10049, 10217
10156, 10178, 10037, 10056
Nakamichi 11493
Naxa 11998
NEC 10030, 10019, 10036, 10056,
10170, 10434, 10455, 10497,
10882, 11398, 11704, 11797,
12026
NetTV 11755
Nikko 10178, 10030, 10092
Niko 11581
Noblex 10430
Norcent 10748, 10824, 11089, 11365,
11590, 11591
Norwood Micro 11286, 11296, 11303
Noshi 10018
NTC 10092
NuVision 11657
Olevia 11144, 11240, 11331, 11610
Olympus 11342
Onwa 10180
Optimus 10250, 10154, 10166, 11913
10887, 11348, 11674 Optoma
Optonica
Orion
10093, 10165
10236, 10463, 11463, 10179,
11905, 11911
10250, 10051, 10055, 10162, Panasonic
10226, 10375, 11310, 11410,
11919
Penney 10047, 10156, 10051, 10060,
Philco
Philips
Pilot
10178, 10030, 11919, 11907,
10747, 10309, 10149, 10135,
10110, 10032, 10027, 10021,
10019, 10018, 10003, 10002
10054, 10030, 10019, 10020,
10028, 10096, 10302
10054, 10037, 10690, 11483
10030, 10019
Pioneer 10166, 10038, 10172, 11398
Planar 11496
Polaroid 10765, 12063, 12002, 11991,
11962, 11769, 11767, 11766,
11762, 11687, 11565, 11538,
11385, 11341, 11328, 11327,
11326, 11316, 11314, 11286,
11276, 11262, 10865, 11385
Portland 10092, 10019
Prism 10051
Proscan
Prima
10047, 10466, 10747, 11922
10761, 10817, 11389, 11785,
11933
Proton 10178, 10003, 10031, 10052,
10466
Protron
Proview
11320, 11323
10835, 11687
Pulsar 10017, 10019
Puneet 11546
Pvision 11222
Quasar 10250, 10051, 10055, 10165,
10219, 11919
RCA 10047, 12002, 11953, 11948,
11922, 11919, 11907, 11781,
10747, 10278, 10254, 10135,
10090, 10038, 10029, 10019,
10018
Realistic 10154, 10180, 10178, 10030,
10019, 10032, 10056, 10165
RevolutionHD 11623
Rhapsody
Runco
Sampo
Samsung
10183, 10216
10017, 10030, 10497, 10612,
11398, 11629
11755, 10030, 10032, 10052,
10100, 10110, 11597
10812, 10060, 10702, 10178,
10030, 11959, 11632, 11575,
11060, 10814, 10766, 10587,
Sansui
10482, 10427, 10408, 10329,
10217, 10056, 10032, 10019
10463, 11409, 11904, 11911,
11935
Sanyo
Sceptre
10154, 10088, 10146, 10159,
10232, 10484, 10735, 10798,
10799, 11907
10878, 11217, 11360, 11599
Scimitsu 10019
Scotch 10178
Scott
Sears
Seleco
Sharp
Sharper Image
10236, 10180, 10178, 10019,
10179, 10309, 11711
10047, 10054, 10154, 10156,
10178, 10171, 10015, 10056,
10146, 10149, 10159, 10168,
10179, 10747, 11007, 11904
10737, 11297
10093, 10153, 10165, 10398,
10491, 10851
11950
Sheng Chia 10093
Sherwood 11399
Shogun 10019
Signature 10016
Signet 10800, 10844, 11262
SIM2 Multimedia 11297
Simpson 10186, 10187
Skyworth 11799
Solarism 11220
Sole 10813, 11031, 11366, 11377,
11483, 11530, 11623, 12075,
12076
Sony
Soundesign
Sova
Soyo
Spectricon
10000, 10011, 10273, 10353,
10834, 11317, 11400, 11685,
11786, 11791, 11904, 11925
10180, 10178, 10179, 10186
11320, 11952
11546, 11746, 11824, 11826,
11828, 11830, 11831
10003, 10137
Spectroniq 11687
Squareview 10171
SSS 10180, 10019
Starlite 10180
Studio Experience 10843
SunBrite 11420, 11435
10093, 10864 Superscan
Supre-Macy 10046
Supreme 10000
SVA
Sylvania
Symphonic
Syntax
Tandy
Tatung
Technics
Technol Ace
Techview
Techwood
Teknika
10748, 10587, 10768, 10865,
10871, 10872
11864, 10054, 10030, 10171,
10020, 10028, 10065, 10096,
11314, 11665, 11963
10180, 10171, 11904, 11913
11610, 11144, 11240
10093, 10218
Tashiko 10588
10003, 10049, 10055, 11101,
11286, 11287, 11288, 11361,
11503, 11756
10250, 10051
10179
10847, 12004
10051, 10003, 10056
10054, 10180, 10150, 10060,
10092, 10016, 10019, 10056,
10175, 10179, 10186, 10312,
10322
Telefunken 10702, 10056, 10101
Telemagic 10735
Tera 10031
Thomas 11904
Thomson
TMK
Toshiba
TruTech
10209, 10210, 10625
10178, 10056, 10177
TNCi 10017
10154, 10156, 11265, 10060,
10036, 10149, 10736, 10832,
11343, 11369, 11704, 11935
11723, 12066
TVS 10463
Ultra 10391, 11323
Universal 10027
US Logic
Vector Research
11286, 11303
10030
Venturer 11865
VEOS 11007
Victor 10053
Video Concepts 10098
10054, 10242, 11398, 11629 Vidikron
Vidtech
Viewsonic
10178, 10019, 10036
11755, 10724, 10775, 10797,
10857, 10864, 10885, 11330,
11342, 11578, 11627, 11742,
12014
Viking
Viore
Visart 11336
Vizio
Wards
10046, 10312
11207, 11684, 11811
11758, 10864, 10885, 11756
10054, 10178, 10030, 10016,
10019, 10020, 10021, 10027,
10028, 10029, 10056, 10096,
10165, 10179, 10202
Waycon 10156
Westinghouse
White Westinghouse
WinBook
10000, 10451, 10885, 10889,
10890, 11282, 11577
10463, 11909
11381, 11503
Wyse 11365
Xoceco 11469
Yamaha
Zenith
10030, 10019, 10797, 11407
10017, 10463, 11265, 10178,
10092, 10016, 11904, 11909,
Zonda 10003
OTHER FUNCTIONS
OTRAS FUNCIONES
VOLUME LOCK
The remote control is preprogrammed to control the volume on the DTA. Once a valid TV code is programmed, the VOL +/will control the volume on the TV. If needed, you can change this setup by following the steps below.
Change volume lock from TV to the digital adapter:
1. Press and hold SET until the red light
flashes twice, then release.
2. Enter 9-9-3 (the red light will flash twice).
3. Press 1 (the red light will flash 4 times).
Change volume lock from digital adapter to the TV:
1. Press and hold SET until the red light
flashes twice, then release.
2. Enter 9-9-3 (the red light will flash twice).
Note: If the remote has not already been programmed for your TV, the red light on the remote will display one long flash.
3. Press 2 (the red light will flash twice).
BLOQUEO DE VOLUMEN
El control remoto está preprogramado para controlar el volumen en el DTA. Una vez programado un código de televisión válido, será posible controlar el volumen del televisor con los botones VOL +/.
De ser necesario, puedes cambiar esta configuración siguiendo los pasos que se describen abajo.
Para cambiar el bloqueo de volumen del televisor al adaptador digital:
1. Oprime y sostén el botón SET hasta que
la luz roja parpadee dos veces; entonces,
suéltalo.
2. Teclea 9-9-3 (la luz roja parpadeará dos
veces).
3. Oprime 1 (la luz roja parpadeará 4 veces).
Para cambiar el bloqueo de volumen del adaptador digital al televisor:
1. Oprime y sostén el botón SET hasta que
la luz roja parpadee dos veces; entonces,
suéltalo.
2. Teclea 9-9-3 (la luz roja parpadeará dos veces). Nota: Si el control remoto aún no ha sido programado para funcionar con tu televisor, la luz roja en tu control remoto emitirá un parpadeo largo.
3. Oprime 2 (la luz roja parpadeará dos
veces).
MUG3067 6/11
© 2011 Comcast Corporation. All rights reserved.
© 2011 Comcast Corporation. Derechos Reservados.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement