Alcofind DA-5000 Instruction Manual


Add to my manuals
4 Pages

advertisement

Alcofind DA-5000 Instruction Manual | Manualzz

Breath Alcohol Tester

High level semiconductor sensor

Personal & professional use alcohol tester

DA-5000

Instruction

Manual

3-digit ruby-red LED display

Replaceable pre-calibrated

HADRON

Please read the user's manual carefully before use.

Overview

Thank you for your purchasing our product.

Alcofind DA-5000 is a standard edition of our range of breathalyzers.

It offers reliable accuracy by use of an advanced semiconductor sensor.

Contents

Digital Breathalyzer Alcofind DA-5000

2 (two) AA size Batteries

6 (six) Mouthpieces

Carrying Pouch

User's Manual

Name of Parts

Mouthpiece Power Button

Ready Warning Lamp

Display Window

Battery cover

Outlet

DA-5000

Product Specifications

Indication of B.A.C.

0.00 ~ 0.40%BAC

0.00 ~ 4.00

Accuracy

Warm up time

Response time

Sensor

Power supply

Battery Life

Dimensions(W x H x D)

Weight

Calibration

Operating temperature

Within 5 seconds at 0.50g/l( )

Semiconductor Sensor

2 (two) AA size alkaline batteries

Approx. 300 tests

59.5mm x 116mm x 28mm

107g including batteries every 6 months or after 200 tests

0 ~ 40

The specifications are subject to change without prior notice for functional improvements.

How to Use

1. Initial Use

Press down the battery cover to open it and install two AA size 1.5V

alkaline batteries paying attention to the battery polarity.

Close the battery cover.

Insert the mouthpiece to the slot.

2. How to test Breath Alcohol Concentration

a) Press the button to power on.

The total number of tests performed will be displayed briefly.

Then it starts a countdown automatically.

b) When the countdown reaches "0" (zero), then blow through the mouthpiece

for more than 4~5 seconds till you hear a double beep signal.

c) Once the sensor has analyzed the breath sample, it displays the estimated

B lood Al cohol C oncentration.

3. Beep alarm (Audible warning)

If the Blood Alcohol Concentration reading is over 0.05%BAC

(0.5g/l, 0.25mg/L, 50mg/100ml), then beep alarm will sound.

Alerts : Battery Low

The battery power is low. Please replace the batteries.

Flow Error

HADRON

Calibration the unit displays [Out] and shuts down.

The unit requires recalibration or maintenance.

Important safety information

Allow at least 20 minutes between the last consumption of alcohol and testing.

For more accurate testing, it is recommended to recalibrate the sensor every

6 months or after 200 tests.

For protection of the sensor, avoid direct ray of light, extreme temperature, humid place, keep the device in a well ventilated place and keep out of reach of children.

When not used for a long time, keep the device after taking out the batteries.

In case of reuse after long-term storage, there might be high tolerance of test result for about first 3 tests.

Do NOT leave the device together with newspaper or alcohol containing materials.

Do NOT blow smoke, saliva or other contaminants into the mouthpiece, as the sensor may be damaged.

Do NOT block the air hole apposite to the mouthpiece during the test, as it may damage the sensor.

We recommend you to replace the disposable mouthpiece for sanitary purpose.

Do NOT use the device as a tool to drink and drive. The manufacturer and seller will not take any legal responsibility for the measured test value.

Warranty Card

Product

Purchasing

Date

Digital Breathalyzer Alcofind DA-5000

(DD-MM-YY)

Seller

Shop name

Owner name

The manufacturer warrants the product to be free from defects in workmanship or material (excluding calibration) under normal use either for 1(one) year from date of purchase or 300 breath tests whichever comes earlier. The manufacturer's obligation under this warranty is limited to replacing, adjusting or repairing the unit at manufacturer s option, if returned along with proof of purchase.

Warranty

Period

For any defects due to natural disaster or customer's negligence, misuse, reconstruction and repair by unauthorized person, reasonable cost shall be charged for repair or part replacement.

For any questions, after-sales service, product calibration, or to purchase additional mouthpieces, please contact nearest distributor in your country.

Manufacturer

HADRON

Distributor

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

advertisement