Acura 08L02-TZ5-200C Installation Instructions

INSTALLATION

INSTRUCTIONS

PARTS LIST

Left roof rail cover

Right roof rail cover

Accessory

ROOF RAIL COVERS

P/N 08L02-TZ5-200C

Application

2020 MDX

Publications No.

VERSION 1

Issue Date

JUN 2019

INSTALLATION

Client Information: The information in this installation instruction is intended for use only by skilled technicians who have the proper tools, equipment, and training to correctly and safely add equipment to your vehicle. These procedures should not be attempted by

“do-it-yourselfers.”

NOTE: Be extremely careful not to damage the roof and other finished surfaces of the body.

1.

Remove the left roof rail cover from the left roof rail base.

FRONT

LEFT ROOF

RAIL COVER

(Do not reuse.)

TOOLS AND SUPPLIES REQUIRED

Ratchet

Torque wrench

T-15 TORX bit

The following tools are available through the Acura Tool and Equipment Program. On the iN, click on Service >

Service Bay > Tool and Equipment Program, then enter the number under “Search.” Or, call 888-424-6857.

• Trim Tool Set (T/N SOJATP2014)

• Plastic Trim Tool (T/N SILTRIMTL10)

Illustration of the Roof Rail Covers Installed on the

Vehicle

RIGHT ROOF RAIL COVER

TORX SCREW

LEFT ROOF

RAIL BASE

11 CLIPS

LEFT ROOF RAIL COVER

© 2019 American Honda Motor Co., Inc. – All Rights Reserved.

BII12440-03 (1906) 08L02-TZ5-2B00-90

1 of 2

2.

Install the new left roof rail cover to the left roof rail base.

FRONT

NEW LEFT ROOF

RAIL COVER

TORX SCREW

(reused)

LEFT ROOF

RAIL BASE

11 CLIPS

3.

Secure the left roof rail cover to the left roof rail base with one TORX screw. Torque the TORX screw to

2.1 - 3.6 lb-ft (2.9 - 4.9 N·m).

4.

Repeat steps 1 through 3 to install the right roof rail

cover on the right side of the vehicle.

2 of 2

BII12440-03 (1906) © 2019 American Honda Motor Co., Inc. – All Rights Reserved.