Extron Extender Plus Specification

Extron Extender Plus is a high-performance VGA line driver that extends video and audio signals up to 300 feet (91 meters) over a single CATx cable. It supports resolutions up to QXGA (2048x1536) and features EDID Minder technology for reliable communication between the source and display. With its compact size, easy installation, and versatile mounting options, the Extender Plus is ideal for a wide range of applications, including classrooms, conference rooms, and home theaters.

PDF

Document

Specifications

Extender Plus Series

Video

Gain �� 0 dB, 0�6 dB, 1�2 dB, selectable (when input is 0�7 Vp-p, output is 0�7 V, 0�75 V,

0�8 Vp-p)

Bandwidth �� 400 MHz (-3 dB)

Video input

Number/signal type �� 1 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV component video

Connectors �� 1 female 15-pin HD

Nominal level �� 1�0 Vp-p for Y of component video

0�7 Vp-p for RGB and for R-Y and B-Y of component video

Minimum/maximum levels �� Analog: 0�3 V to 1�5 Vp-p with no offset at unity gain

Impedance �� 75 ohms

Horizontal frequency �� 15 kHz to 135 kHz

Vertical frequency �� 30 Hz to 170 Hz

Input coupling �� DC

ID bits �� Pins 4 and 11: terminated to ground

Pins 12 and 15: used for EDID Minder

Video output

Number/signal type �� 1 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV component video

Connectors �� 5 female BNC on pigtails

RGB: 3" (7�6 cm) pigtails

HV: 5" (12�7 cm) pigtails

Nominal level �� 1�0 Vp-p for Y of component video

0�7 Vp-p for RGB and for R-Y and B-Y of component video

Minimum/maximum levels �� Analog: 0�3 V to 1�5 Vp-p with no offset at unity gain

Impedance �� 75 ohms

DC offset �� ±5 mV with input at 0 offset

Return loss �� >35 dB @ 5 MHz

Sync

Input type �� RGBHV, RGBS, RGsB, RsGsBs, bi-level and tri-level component video sync

Output type �� RGBHV, RGBS, RGsB, RsGsBs, bi-level and tri-level component video sync

Input level �� 2�0 V to 5�0 Vp-p

Output level �� TTL: 5 Vp-p, unterminated

Input impedance �� 510 ohms

Output impedance �� 75 ohms

Max� propagation delay �� 18�8 ns

Max� rise/fall time �� 4 ns

Polarity �� Positive or negative (follows input)

Audio

Gain �� Unbalanced output: 0 dB; balanced output: +6 dB

Frequency response �� 20 Hz to 20 kHz, ±0�5 dB

THD + Noise �� 0�01% @ 1 kHz at nominal level

S/N �� >90 dB at rated maximum output

Stereo channel separation �� >75 dB @ 20 Hz to 20 kHz

Extron Extender Plus Series VGA Line Drivers with EDID Minder® • Specifications 1

Audio input

Number/signal type �� 1 stereo, unbalanced

Connectors �� (1) 3�5 mm mini stereo jack

Impedance �� >10k ohms unbalanced, DC coupled

Nominal level �� -10 dBV (316 mVrms)

Maximum level �� +6 dBV, (unbalanced) at 1% THD+N

Audio output

Number/signal type �� 1 stereo, balanced/unbalanced

Connectors �� (1) 3�5 mm direct insertion captive screw connector, 5 pole

Impedance �� 50 ohms unbalanced, 100 ohms balanced

Nominal level �� -2 dBu, balanced; -10 dBV unbalanced

Maximum level (Hi-Z) �� +14 dBu, balanced, at 1% THD+N

Maximum level (600 ohm) �� +6 dBm, balanced, at 1% THD+N

NOTE: 0 dBu = 0�775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu

General

Power supply �� External

Input: 100-240 VAC, 50-60 Hz

Output: 12 VDC, 1 A, 12 watts

Power consumption

Device �� 1�4 watts, 12 VDC

Device and power supply �� 1�7 watts, 100-240 VAC, 50-60 Hz

Temperature/humidity �� Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing

Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing

Cooling �� Convection, no vents

Thermal dissipation

Device �� 4�4 BTU/hr

Device and power supply �� 5�6 BTU/hr

Mounting

Furniture or wall mount

Extender Plus AAP�� Yes, with optional AAP mounting faceplates

Extender Plus D �� Yes, in a standard 1 gang US electrical wall box or included mud ring

Enclosure type �� Metal (Extender Plus D has a metal faceplate and a plastic decorator-style wall plate�)

Enclosure dimensions

Extender AAP Plus

Faceplate �� 1�4" H x 3�5" W x 0�1" D

(3�6 cm H x 8�9 cm W x 0�3 cm D) (double space high AAP plate)

Enclosure�� 1�4" H x 2�7" W x 1�3" D*

(3�6 cm H x 6�9 cm W x 3�3 cm D*)

(*Depth excludes BNC connectors and cables� Allow at least 1�6" (4�1 cm) depth for connector and cable bend radius�)

Extender Plus D

Faceplate �� 2�6" H x 1�3" W x 0�3" D (6�6 cm H* x 3�3 cm W x 0�6 cm D)

(Depth excludes connectors� Fits the opening in a 1 gang decorator-style wallplate�)

*Overall height is 4�1" (10�4 cm) including mounting tabs� Mounting holes are 3�8"

[9�5 cm] apart on center�

Enclosure�� 2�7" H x 1�8" W x 1�3" D*

(6�9 cm H x 4�6 cm W x 3�3 cm D*)

(*Depth excludes BNC connectors and cables� Allow at least 1�6" (4�1 cm) depth for connector and cable bend radius�)

Product weight �� 0�2 lbs (0�1 kg)

Extron Extender Plus Series VGA Line Drivers with EDID Minder® • Specifications 2

Vibration �� ISTA 1A in carton (International Safe Transit Association)

Regulatory compliance

Safety �� CE, c-UL, UL

EMI/EMC �� CE, C-tick, FCC Class A, ICES, VCCI Class A

Environmental �� Complies with the appropriate requirements of RoHS, WEEE�

Warranty �� 3 years parts and labor

NOTE: All nominal levels are at ±10%�

NOTE: Specifications are subject to change without notice�

NOTE: Shipping weights and dimensions are available at www.extron.com

�

041717-D4

Extron Extender Plus Series VGA Line Drivers with EDID Minder® • Specifications 3

Hello! I am an AI chatbot specifically trained to assist you with the Extron Extender Plus Specification. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!