Specifications
PS 125
General
Power output ��������������������������������� 12 VDC, regulated; 5 A maximum; 60 watts, total for all 8 outputs
NOTE: Maximum output current is rated at an ambient temperature of 40 °C�
Power input ����������������������������������� 100 VAC to 240 VAC, 50-60 Hz
No load ����������������������������������� 0�13 watts at 115 VAC
0�17 watts at 230 VAC
Full power �������������������������������� 66�72 watts at 115 VAC
65�86 watts at 230 VAC
Temperature/humidity �������������������� Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling ������������������������������������������ Convection, no vents
Thermal dissipation ������������������������ 34�4 BTU/hr
Mounting
Rack mount ����������������������������� Yes, with optional 1U rack shelf
Furniture mount ����������������������� Yes, with optional under-desk mounting kit
Enclosure type ������������������������������� Metal
Enclosure dimensions �������������������� 1�75" H x 4�3" W x 8�5" D (1U high, quarter rack wide)
(4�4 cm H x 11�0 cm W x 21�6 cm D)
(Depth excludes connectors�)
Product weight ������������������������������ 1�2 lbs (0�5 kg)
Regulatory compliance ������������������� CE, c-UL, PSE, UL, CISPR 22 Class B, C-tick, EN55022 Class B, FCC Class
B, ICES Class B, VCCI Class B, Complies with the appropriate requirements of
RoHS, WEEE
Product warranty ��������������������������� 7 years parts and labor
NOTE: All nominal levels are at ±10%�
NOTE: Specifications are subject to change without notice�
NOTE: Shipping weights and dimensions are available at www.extron.com
�
5147-D1
THIS TEXT WINDOW and its contents are for reference only� Delete this material before finishing and releasing the specs sheet� z
Styles are required for proper table placement/formatting (one for the entire specs table as placed within a page [specs table conteiner], two others [ Specs8_Note L1 table and Specs8_Note L2 table ] for the note/caution cells within the specs table)� z
Notes, cautions, and warnings boxes/tables within specs have to be hand inserted and merged and formatted� Use the existing table styles ( NOTE , Caution , and Warning1 ) for the table boxes� z z z
Apply the Specs8_Note L1 table or Specs8_Note L2 table paragraph style
(depending on the content to which the note, caution, or warning applies) to the nested note, caution, or warning table� Also apply the Specs8_Note cell insets cell style to the cell containing the note, caution, or warning nested table�
Apply the Specs8_Note or Specs8_Warning/Caution paragraph style to the text within the nested note, caution, or warning table�
Apply the Specs8_note cell inset cell style to the specs table cell containing the nested table�
© 2020 Extron — All rights reserved. All trademarks mentioned are the property of their respective owners. www.extron.com
1
