Anycom USB-250 Technical Note

TechNote: TN-01015

Product: ANYCOM Blue CF/PC and USB-Family

ActiveSync connection with ANYCOM Blue USB and ANYCOM Blue CF

Required Hardware:

ANYCOM Blue USB-100, 120, 130, 200, 220, 240 or 250

ANYCOM Blue CF-2001, PC-2002, CF-300

Required Software:

Microsoft Windows 98SE, ME, 2000 or XP

Microsoft ActiveSync 3.71

ANYCOM Blue USB drivers v1.4.2.10 or newer

(for Windows)

(for PocketPC)

ANYCOM Blue PC/CF Card drivers for PPC 2.24 or newer

1.) On your PC, right click on the Bluetooth™ icon in the Systemtray and select

Advanced Configuration

2.) Select the Local Services Tab and look for the COM Port for the Bluetooth Serial

Port

3.) If Secure Connection is enabled, select the Bluetooth Serial Port , click on

Properties and disable Secure Connection .

4.) Start Mircosoft ActiveSync and select File -> Connection Settings and select the

COM Port which you configured in the previous step.

5.) On your PDA, click on the Bluetooth icon and select Open Bluetooth Wizard .

6.) Select the Serial Port Connection and click on Next .

7.) Now select the COM Port and click on Next .

8.) The Bluetooth Wizard will now search for available Bluetooth devices. When it has found your device select it and click on Next .

9.) The Bluetooth Wizard has now created a Serial connection with your PC, click on

Finish and Exit the Wizard.

10.) Now start and select Tools -> Options .

11.) Select the and entry and click on Ok to save your selection.

12.) To establish the ActiveSync connection with your PC click on Start -> Bluetooth

ActiveSync .