AVE Parallel Device with DB-25 Connectors P-2-RS Operation Manual

P-2-RS Installation

Parallel Device with DB-25 Connectors

The DB-9 to DB-9 cable hooks the P-2-RS to the VSI-Pro

DB-9F

P-2-RS

DB-9M

VSI-Pro

The pin out for the cable between the

P-2-RS and the VSI-Pro is as follows:

P-2-RS DB-9F VSI-Pro DB-9M

3----------------------------------2

1----------------------------------5

The device’s parallel cable plugs back into this DB-25M Connector

This DB-25M Connector plugs into the P-2-RS

This DB-25F

Connector plugs into the device’s parallel port

Refer to the VSI-Pro Operation Manual for further instructions on programming your VSI-Pro.