Apantac EDID-EW-H User Manual

HDMI EDID

Learner / Emulator

USER MANUAL

EDID-EW-H

Package Contents

§ 1 x EDID-EW-H

1 x User Manual §

Features

§ Learn and store desired EDID from Display

§ 15 preinstalled EDID

§ Passive inline device – No external power needed

§ Bi-directional (bi-gender). It can be used in either direction

§ HDCP 1.4 / 2.2 Compatible

§ Hot pluggable

§ Supports HDMI 1.3/1.4/2.0

§ Supports up to 4K/UHD @ 60Hz

Specifications

5.

When the LED starts flashing Red, connect the HDMI cable from the display to the female end of the

EDID-EW-H.

6.

The LED will now turn purple. This means it is learning the EDID

7.

When the LED turns solid blue, it means the EDID has been stored and ready to use

8.

The EDID-EW-H is now ready to use

9.

The EDID-EW-H will retain the latest learned EDID until the learning procedure is performed again

Preinstalled EDID

1.

Turn the rotary switch to 1 to F to select the preinstalled

EDID

2.

It is recommended to power cycle all equipment before the emulator is used to ensure HDMI hand shake initialization

1.

HDMI Type A Male

2.

HDMI Type A Female

3.

LED Indicator a.

Flashing Red – learning mode b.

Purple – Learning mode c.

Blue – Emulation mode, ready to use

4.

Rotary Switch for selecting EDID settings

How to learn EDID

1.

Set rotary switch to “0”

2.

Connect a HDMI cable to the desired display

3.

Connect the EDID-EW-H to a source as a power source

4.

Once the EDID-EW-H receives the power needed, LED will start flashing red. This means it is ready to learn

© 2017 APANTAC LLC, All rights reserved

7470 SW BRIDGEPORT ROAD

PORTLAND, OR 97224, USA

PHONE +1 503 968 3000, FAX +1 503 389 7921

The content of this document are provided in connection with Apantac LLC

(“Apantac”) products. Apantac makes no representation or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specification and product descriptions at any time without notice