ACE PLUS CORP.

EX-G048C

1x2 DVI Distribution Amplifier with HDCP

Support

User Manual

Page 1 of 8

Headquarters :

9F-2., No. 190 Sec. 2 Jung Shing Rd.,Hsin-dian,

Taipei, Taiwan 231

TEL: +886-2-2912-4201

FAX: +886-2-2912-3164

Website: www.ace-plus.com

www.ace-plus.tw

ACE PLUS CORP.

Safety and Notice

The

EX-G048C 1x2 DVI Distribution Amplifier with HDCP Support has been tested for conformance to safety regulations and requirements, and has been certified for international use.

However, like all electronic equipments, the EX-G048C should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit. z Follow all instructions and warnings marked on this unit. z Do not attempt to service this unit yourself, except where explained in this manual. z Provide proper ventilation and air circulation and do not use near water. z Keep objects that might damage the device and assure that the placement of this unit is on a stable surface. z Use only the power adapter and power cords and connection cables designed for this unit. z Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.

Page 2 of 8

Headquarters :

9F-2., No. 190 Sec. 2 Jung Shing Rd.,Hsin-dian,

Taipei, Taiwan 231

TEL: +886-2-2912-4201

FAX: +886-2-2912-3164

Website: www.ace-plus.com

www.ace-plus.tw

ACE PLUS CORP.

Introduction

The

EX-G048C 1x2 DVI Distribution Amplifier with HDCP Support provides the most cost effective and advanced DVI splitter solution on the market, by which the high definition video can be transmitted to 2 different locations without losing quality. To equip with HDMI compliant splitter chipsets,

EX-G048C is also good to be used as an advanced HDMI 2 port splitter. EX-G048C is suitable for high quality PC broadcasting, digital signage and education applications!

Features

z HDMI 1.3b/DVI 1.1 compliant z HDCP 1.2 compliant z Wide Frequency Range: 25MHz~225MHz z Video bandwidth: 6.75Gbps z Resolution up to 1080p or WUXGA [1920x1200@60] z Automatic EDID learning z HDMI supports x.v.YCC, x.v.Color & Deep Color z HDMI Supports Dolby Digital, DTS-HD and Dolby TrueHD audio formats z USB firmware update for expanding compatibility z Wall-mount housing design for easy installation

Automatic EDID learning will detect all the connected DVI/HDMI equipped monitors and analyze all the content of EDID. The EDID with minimal resolution support will be the reference EDID for incoming DVI/HDMI source players.

Page 3 of 8

Headquarters :

9F-2., No. 190 Sec. 2 Jung Shing Rd.,Hsin-dian,

Taipei, Taiwan 231

TEL: +886-2-2912-4201

FAX: +886-2-2912-3164

Website: www.ace-plus.com

www.ace-plus.tw

ACE PLUS CORP.

Specifications & Package Contents

Model Name

Technical

Role of usage

HDMI compliance

DVI compliance

HDCP compliance

Video bandwidth

Video support

Audio support

ESD protection

PCB stack-up

Firmware update

CEC Channel

Input TMDS signal

Input DDC signal

Input

Output

DVI connector

USB connector

Mechanical

Housing

Dimensions

(L x W x H)

Model

Package

Carton

Model

Weight

Package

Fixedness

Power supply

Power consumption

Operation temperature

Storage temperature

Relative humidity

Package Contents

EX-G048C

1x2 Distribution Amplifier (Splitter)

HDMI 1.3c [Deep Color, xvYCC color space supported]

DVI 1.1

Yes

Single-link 225MHz [6.75Gbps]

Up to WUXGA [1920x1200@60Hz] & UXGA [1600x1200@60Hz]

DTS-HD Master Audio, Dolby TrueHD

Dolby Digital, DTS, DVD-Audio, LPCM, SACD, MPCM

[1] Human body model — ±19kV [air-gap discharge] & ±12kV [contact discharge]

[2] Core chipset — ±2kV

4-layer board [impedance control — differential 100

Ω

; single 50

Ω

]

Feasible via USB-port

N/A

1.2 Volts [peak-to-peak]

5 Volts [peak-to-peak, TTL]

1x DVI/HDMI [7.1ch audio & video]

2x DVI/HDMI [7.1ch audio & video]

DVI-I [29-pin female digital only]

Standard type-B [square shape]

EX-G048C

Metal enclosure

204 x 92 x 27mm [8” x 3.6” x 1.1”]

270 x 175 x 80mm [10.6” x 6.9” x 3.1”]

430 x 360 x 290mm [1’5” x 1’2” x 11”]

720g [1.6 lbs]

980g [2.2 lbs]

Wall-mounting case with screws

5V 4A DC

4 Watts [max]

0~40

°

C [32~104

°

F]

-20~60

°

C [-4~140

°

F]

20~90% RH [no condensation]

1x EX-G048C

1x 5V power supply unit

1x User Manual

Page 4 of 8 Headquarters :

9F-2., No. 190 Sec. 2 Jung Shing Rd.,Hsin-dian,

Taipei, Taiwan 231

TEL: +886-2-2912-4201

FAX: +886-2-2912-3164

Website: www.ace-plus.com

www.ace-plus.tw

ACE PLUS CORP.

Panel Descriptions

Rear Panel

1 2 3 4 5

1. DVI IN

: DVI input source

2. DVI OUT

: distributed DVI outputs

3. USB IN

: for firmware update use only

4. Power

: Red light means power is on

5. +5V DC

interlocking power jack: connect to 5V 4A interlocking power supply unit

When the connected DVI/HDMI monitor is verified as DVI or HDMI and HDCP compliant, the corresponding green LED will blink.

Page 5 of 8

Headquarters :

9F-2., No. 190 Sec. 2 Jung Shing Rd.,Hsin-dian,

Taipei, Taiwan 231

TEL: +886-2-2912-4201

FAX: +886-2-2912-3164

Website: www.ace-plus.com

www.ace-plus.tw

ACE PLUS CORP.

Hardware Installation

Broadcasts DVI signal to 2 DVI displays!

1. Switch off all devices, including monitors.

2. Connect to the receivers.

3. Connect a DVI source (such as a Blu-ray Disc player or PC) to the DVI In.

4. Plug in 5V DC power supply unit.

5. Power on the DVI monitors.

6. Power on the DVI source.

EX-G048C

DVI / HDMI

DVI cable

DVI cable DVI cable

LCD LCD

Page 6 of 8 Headquarters :

9F-2., No. 190 Sec. 2 Jung Shing Rd.,Hsin-dian,

Taipei, Taiwan 231

TEL: +886-2-2912-4201

FAX: +886-2-2912-3164

Website: www.ace-plus.com

www.ace-plus.tw

ACE PLUS CORP.

Notice

1. While connecting a new monitor to the splitter, experiencing a short period of time no display may be expected. Automatic EDID learning will analyze the newly connected monitor to see if the EDID for the DVI input is necessary to update!

2. For long range high definition DVI transmission applications, please adopt CAT5/6 cable based

DVI extenders.

3. For firmware update through USB, users MUST first turn off the power, plug USB cable connected to your PC, and then power up the module! In this setup, the power LED indicator will NOT blink, and this is normal! Execute the attached or download EPFlash.exe, and the following window will pop up. Click on “OpenFile” button to direct to the new firmware HEX file, and keep PORT at USB

0! Meantime, keep “Program With Verification” selected, and then click on “START” button on the bottom of the window! Wait for seconds until the update process is completed! After firmware update is successfully accomplished, please unplug USB cable and power off the splitter!

Page 7 of 8 Headquarters :

9F-2., No. 190 Sec. 2 Jung Shing Rd.,Hsin-dian,

Taipei, Taiwan 231

TEL: +886-2-2912-4201

FAX: +886-2-2912-3164

Website: www.ace-plus.com

www.ace-plus.tw

ACE PLUS CORP.

Limited Warranty

The SELLER warrants the

EX-G048C 1x2 DVI Distribution Amplifier with HDCP Support

to be free from defects in the material and workmanship for 1 year from the date of purchase from the

SELLER or an authorized dealer. Should this product fail to be in good working order within 1 year warranty period, The SELLER, at its option, repair or replace the unit, provided that the unit has not been subjected to accident, disaster, abuse or any unauthorized modifications including static discharge and power surges. This warranty is offered by the SELLER for its BUYER with direct transaction only. This warranty is void if the warranty seal on the metal housing is broken.

Unit that fails under conditions other than those covered will be repaired at the current price of parts and labor in effect at the time of repair. Such repairs are warranted for 90 days from the day of reshipment to the BUYER. If the unit is delivered by mail, customers agree to insure the unit or assume the risk of loss or damage in transit. Under no circumstances will a unit be accepted without a return authorization number.

The warranty is in lieu of all other warranties expressed or implied, including without limitations, any other implied warranty or fitness or merchantability for any particular purpose, all of which are expressly disclaimed.

Proof of sale may be required in order to claim warranty. Customers outside Taiwan are responsible for shipping charges to and from the SELLER. Cables and power adapters are limited to a

30 day warranty and must be free from any markings, scratches, and neatly coiled.

The content of this manual has been carefully checked and is believed to be accurate. However,

The SELLER assumes no responsibility for any inaccuracies that may be contained in this manual.

The SELLER will NOT be liable for direct, indirect, incidental, special, or consequential damages resulting from any defect or omission in this manual, even if advised of the possibility of such damages.

Also, the technical information contained herein regarding the

EX-G048C features and specifications is subject to change without further notice.

Page 8 of 8 Headquarters :

9F-2., No. 190 Sec. 2 Jung Shing Rd.,Hsin-dian,

Taipei, Taiwan 231

TEL: +886-2-2912-4201

FAX: +886-2-2912-3164

Website: www.ace-plus.com

www.ace-plus.tw