Audiovox AN-200 Instruction Manual

GLASSMOUNTMOBILE TELEVISION ANTENN A

Instr uctionMan ual

Audiovox Corporation

150 Marcus Blvd., Hauppauge, NY 11788

Technical Support 1-800-645-4994

Mounting Instructions

MOUNT AN-200

HORIZONTALLY ON

NON-TINTED WINDOW

Clean outside of window where antenna is to be mounted. Window should be free from moisture, dirt and oil. Peel adhesive backing from antenna mast and place antenna carefully against surface of window.

The provided mast clip should be snapped onto the mast. Peel adhesive backing from antenna mast clip and attach to the window.

ANTENNA MAST CLIP

PEEL ADHESIVE BACK

AND APPLY TO WINDOW

Clean inside of window. Window should be free from moisture, dirt and oil. Peel adhesive backing from pickup directly over base of antenna mast. Attach cable to pickup and to the television antenna input.

Due to the nature of TV signals, vehicle motion, direction the vehicle is facing, distance from the TV transmitter, nearby surroundings and weather may adversely effect TV reception. Results of these conditions may be picture roll, poor reception (snowy picture), and momentary loss of color (especially while the vehicle is moving).

For best viewing results, this antenna system is recommended to be used while the vehicle is stationary.

© 1999 Audiovox Corporation, Hauppauge, NY 11788

128-5563