Whirlpool WWDC 7210 Washing machine Program Chart

Add to My manuals
2 Pages

advertisement

Whirlpool WWDC 7210 Washing machine Program Chart | Manualzz

EN PROGRAMME CHART

A. “Door open” indication

This washing machine is equipped with automatic safety functions which detect and diagnose faults at an early stage and react appropriately, e.g.:

B. “Service” indication

C. “Water tap closed” indication

D. “Clean pump” indication

C

D

H

E F

A

B

I

J G

E. Programme selector

F. “Start/Pause” button

G. Spin speed selector

H. Programme sequence indicator

I. “Reset” button

J. “Start delay” button

Programme

Care

Labels

Max.

Load kg

Type of wash / Notes

- respect the manufacturer's recommendations on the care label

Cotton

95 °C

Cotton

40 - 60 °C

SuperEco

60 °C

7.0

7.0

7.0

Normally to heavily soiled and robust white cotton laundry. In case of heavy soiling or stains, you can add an oxygenbased bleach additive which can be used at 95°C.

This programme eliminates bacteria, ensuring sanitization of your laundry.

Normally soiled cotton laundry. At 40°C and 60°C most favourable programme in terms of combined water and energy consumption for washing cotton laundry.

- Reference programme for the Energy Label.

Heavily soiled and robust laundry made of cotton, synthetics and their blends.

Economical energy consumption by prolonged wash duration - ideal to be run overnight to profit from more favourable energy rates. Avoid noise of spinning at night by setting the spin speed to “0” and start spin programme in the morning, or by defining programme start with “Start delay” accordingly. - For garments with a high share of synthetic fibres, we recommend to use a laundry net.

Normally soiled garments made of artificial fibres (like polyester, polyacryl, viscose etc.) or their blends with cotton.

Synthetics

30 - 40 - 60 °C

Delicates

30 - 40 °C

Daily load

40 °C

Quick wash

30 °C

Wool

Cold - 40 °C

Handwash

30 - 40 °C

Rinse & Spin

3.0

1.5

4.0

4.0

1.0

1.0

Curtains and delicate clothing, dresses, skirts, shirts and blouses.

Slightly to normally soiled robust laundry made of cotton, linen, artificial fibres and their blends. Effective one-hour programme. Make sure to wash only similar colours together in one wash load .

Shortly worn clothing made of cotton, polyester, polyamide and blends with cotton.

Brief programme to refresh your laundry.

Only woollens, labelled with the Woolmark and identified as machine washable.

Textiles made of silk, linen, wool and viscose marked as “handwashable”.

– 7.0

Same as the last rinse and the final spin in the “Cotton” programme.

Spin

Drain

7.0

Intensive spin. Same as the spin cycle in the “Cotton” programme.

Drain only - no spinning. Alternative method of terminating programme after “Rinse hold”.

i

1)

: option / Yes : dosing required

For improved garment care spin speed is restricted in these programmes.

Detergents and Additives

Pre- wash

Main

Wash

Softener

Prewash

Rapid Start delay i i

– i i

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

– i i i i i i i i i i

– i i

– i i

– i

– i

– i i i i i i i i i i i i i

– i

Special options

Cold wash

Intensive rinse

Easy ironing

Rinse hold

Spin speed

Max

Spin

Speed rpm

– i i i i Max.

i i i i i i i i

– i i i

– i

– i

– i

– i

– i

– i i i i i i i i i

– i i i i i i i i i i

Max.

Max.

Max.

1000

Max.

1)

Max.

1000 1)

400 1)

Max.

Max.

Whirlpool is a registered trademark of Whirlpool USA.

5019 300 01844

CONSUMPTION DATA

Programme

Temperature

(°C)

Load

(kg)

Water

(l)

Energy

(kWh) without “Rapid”

Approx. programme duration

(hours : minutes) without “Rapid” with “Rapid”

%

Cotton

Cotton *

Cotton *

Cotton *

Super Eco

Synthetics

Synthetics

Delicates

Daily load

Quick wash

Wool

Handwash

Handwash

30

40

40

30

60

40

30

40

95

60

60

40

60

7.0

7.0

3.5

3.5

7.0

3.0

3.0

1.5

4.0

4.0

1.0

1.0

1.0

74**

52

40

40

69

50**

46

60

45

45

60

45

45

2.10

1.05

0.85

0.65

0.84

0.80

0.50

0.50

0.50

0.40

0.50

0.50

0.40

2:10

4:00

3:00

3:00

4:00

1:35

1:20

0:45

1:00

0:30

0:45

0:40

0:36

-

2:30

***

***

-

1:14

0:59

-

-

-

-

-

-

59

53

40

59

Consumption values were measured in normalized conditions, in compliance with IEC/EN 60456. In the home, they may vary depending on the individual water supply pressure and temperature, the load and the type of wash. The consumption data indicated are based on an inlet water temperature of approx. 15°C through the cold fill valve as well as the hot fill valve (if available). If your washing machine has a hot fill valve, connection of this valve to hot water supply will lower the energy consumption by reduced heating times, depending on the individual hot fill inlet water temperature. Water and energy consumptions refer to the default setting of the programmes, with temperature and load as indicated in the table; selecting any options or changing the spin speed will also change the consumption data.

The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that time (see also “Troubleshooting

Guide” in your Instructions for Use).

Approximate remaining moisture content (%). After programme and spinning with maximum selectable spin speed, in default programme setting.

* Reference programmes for Energy Label. For reasons of energy saving, the real water temperature may deviate from the declared cycle temperature.

** To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.

*** Automatic adaptation of programme duration after detection of wash load

LOAD LAUNDRY, ADD DETERGENTS

AND SELECT THE PROGRAMME

Power consumption in off-mode 0.16 W / in left-on mode 0.16 W

Load the laundry, close the door and add detergents as indicated on the front page and as described in the chapter

“Detergent and Additives” in your Instructions for Use.

• Turn the programme selector to the desired

programme and temperature.

• The display shows the programme duration and the

predefined spin speed.

• The indication lamp next to the “ Start/Pause ” button

blinks.

If you do not start the programme soon after having made your choice, the washing machine will switch off automatically after about a quarter of an hour. To switch the washing machine on again, turn the programme selector to

“O” and afterwards to the desired programme again.

SELECT ANY DESIRED OPTION

Push the button of any option desired - the respective indication lamp lights up. If the combination of programme and additional option(s) is not possible, the indication lights switch off automatically.

“Prewash” button

• Adds a prewash cycle to the wash programme selected;

prolongs the programme by about a quarter of an hour.

• Recommended for heavily soiled laundry (e.g. with sand

or granular dirt).

• Do not use liquid detergent for the main wash when

activating the “Prewash” option.

“Rapid” button

• Enables quicker washing by shortening the programme

duration.

• Recommendable for only lightly soiled laundry.

• Not selectable for Cotton 95°C.

“Clean+” button

• Choose this option if you use an in-wash additive for

stain removal (powder, for example “Vanish”) - it will

optimize the additive’s efficiency to get better wash

performance and stain removal.

• Use with the maximum load.

• Add an appropriate amount of in-wash additive for stain

removal (powder) to the main wash chamber, together

with your detergent (only use powder detergent with this

option). Respect the manufacturer’s dosing instructions.

• May prolong the programme by up to 15 minutes

• Appropriate for use of stain removers and bleaches

on oxygen basis. Chlorine or perborate bleaches

must not be used!

“Cold wash” button

• Saves energy used for water heating while maintaining

good wash result.

• Recommendable for lightly soiled laundry without stains.

• Make sure that your detergent is suitable for cold

wash temperatures (15 or 20 °C).

• Mainly selectable on the lowest temperature step of

the programmes.

“Intensive rinse” button

• More water is added and rinse cycle is prolonged.

• This option is particularly suitable for areas with very soft

water, washing baby linen and helps people with allergies.

“Easy ironing” button

• Reduces creasing by an increased water quantity and

a very gentle spin.

“Rinse hold” button

• The laundry remains in the last rinse water without

pregressing to the final spin cycle to avoid creasing and

prevent colours from changing.

• It is particularly useful if you want to postpone spinning to

a later time, or if you want to drain only.

• The programme stops to “Rinse hold” at the time the

“Rinse hold” lights in the preogramme sequence

indication is on. The “ Start/Pause ” indicator blinks.

Terminate the “Rinse hold” option:

• Press the “ Start/Pause ” button; the programme will

terminate automatically with the final spin cycle for the

present wash programme.

• If you do not wish to spin the clothes, turn the

programme selector to the “Drain” programme and press

the ” button.

“Spin” button

• Every programme has a predefined spin speed.

• Press the button to set different spin speed.

• If spin speed “0” is selected, the final spinning is cancelled

but intermediate spin peaks remain during rinse.

The water is drained out only.

START DELAY

The “Start delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper. Do not use liquid detergent when activating “Start delay” option.

• Select programme, temperature and options.

• Press the “Start delay” button to select the desired

delay time up to 23 hours.

• Press the “ Start/Pause ” button. On the display, the start

delay symbol and the dot between hours and minutes

blink. The countdown of the delay time begins.

• The time delay indication disappears when the

programme starts and it is replaced by the remaining

programme time.

• Once having pressed the “ Start/Pause ” button, the delay

time can be reduced by pressing again the “Start delay”

button.

To cancel the “Start delay”

...before you press the “Start/Pause” button:

• Turn the programme selector to another position or

press the “ Reset ” button.

...after having pressed the “Start/Pause” button:

• Press the “ Start/Pause ” button - the start delay time

disappears from the time display.

PROGRAMME START

Open the tap and press the “ Start/Pause ” button.

The indication lamp next to the “ Start/Pause ” button lights up. The programme sequence indicator shows the current programme phase, running from left to right through Wash,

Rinse, Spin/Drain.

When the laundry load is detected or the programme duration is updated, the display shows an animation.

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the lamp lights to show the the door can be opened. As long as a wash programme is running, the door remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to

“Cancel (Reset) a running programme before the end”.

FAILURE INDICATIONS

In case of any failures or irregularities, consult the

“Troubleshooting Guide” in your Instructions for Use.

“ Water tap closed ”: no or not sufficient inlet water.

” Service ”: failure or malfunction of an electrical component.

” Clean pump ”: waste water is not pumped out.

Spin speed on display blinks : unbalance during spinning.

PROGRAMME END

The “Door open” indicator lights up, and the display shows

“End”. After about a quarter of an hour, the washing machine will switch off completely to save energy.

1. Turn the programme selector to the “O” position.

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

CHANGE PROGRAMME AND/OR OPTIONS

AFTER PROGRAMME START

1. Press the “ Start/Pause ” button to pause the

programme. The light blinks.

2. Select the new programme, any options and another

spin speed if you want.

3. Press the “ Start/Pause ” button again.

The new programme continues at the same position

where the previous programme was interrupted.

Do not add detergent for this programme.

CANCEL (RESET) A RUNNING PROGRAMME

BEFORE THE END

The “Reset” button cancels a programme before the end.

• Press and hold the “ Reset ” button for a few seconds.

Any existing water is drained out. It may last some time

until the door can be opened.

Whirlpool is a registered trademark of Whirlpool USA.

5019 300 01844

advertisement

Related manuals

advertisement