GB PROGRAMME CHART
A. “Door open” indication
This washing machine is equipped with automatic safety functions which detect and diagnose faults at an early stage and react appropriately, e.g.:
C
J
D
B. “Service” indication
C. “Water tap closed” indication
D. “Clean pump” indication
G
H
A
B
I
E. Programme selector
F. “Start(Pause)” button
G. Spin speed selector
H. Programme sequence indicator
and Start delay indicators
I. “Reset” button
J. “Start delay” button
E
F
Cotton
95°C
Cotton
40 - 60 °C
Eco Green
60 °C
Programme
Coton
95°C
Coton
40 - 60 °C
60 °C
Care
Labels
Max.
Load kg
7.0
7.0
7.0
3.0
Type of wash / Notes
- respect the manufacturer's recommendations on the care label
Normally to heavily soiled and robust white cotton laundry. In case of heavy soiling or stains, you can add an oxygenbased bleach additive which can be used at 95°C.
This programme eliminates bacteria, ensuring sanitization of your laundry.
Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.
Heavily soiled and robust laundry made of cotton, synthetics and their blends.
Economical energy consumption by prolonged wash duration - ideal to be run overnight to profit from more favourable energy rates. Avoid noise of spinning at night by setting the spin speed to “0” and start spin programme in the morning, or by defining programme start with “Start delay” accordingly. - For garments with a high share of synthetic fibres, we recommend to use a laundry net.
Detergents and Additives
Pre- wash
Main
Wash
Softener Prewash
Prélavage
Cold wash
Lavage froid
Intensive rinse
Rinçage intensif
Special options
Easy ironing
Antifroissage
Arrêt cuve pleine
Essorage variable i i
–
Yes
Yes
Yes i i i i i
–
– i i i i i i i
– i i i i i i
Normally soiled garments made of artificial fibres (like polyester, polyacryl, viscose etc.) or their blends with cotton.
i Yes i i i i i i i
Start delay
Rapid
Départ différé
Rapide
Max
Spin
Speed rpm i i i i
– i
– i
Max.
Max.
Max.
Max.
Synthetics
30 - 40 - 60°C
Delicates
30 - 40°C
Daily load
40°C
Quick wash
30°C
Wool
Cold - 40°C
Handwash
30 - 40°C
Rinse & Spin
Spin
Synthétiques
30 - 40 - 60°C
Délicat
30 - 40°C
40°C
Rapide 30 min.
30°C
Laine
Froid - 40°C
Lavage main
30 - 40°C
Rinçage &
Essorage
Essorage
–
–
1.5
4.0
4.0
1.0
1.0
Curtains and delicate clothing, dresses, skirts, shirts and blouses.
Slightly to normally soiled robust laundry made of cotton, linen, artificial fibres and their blends. Effective one-hour programme. Make sure to wash only similar colours together in one wash load .
Shortly worn clothing made of cotton, polyester, polyamide and blends with cotton.
Brief programme to refresh your laundry.
Only woollens with a felt-free finish, labelled with the woolmark and identified as machine washable.
Textiles made of linen, silk, wool and viscose marked as “handwashable”.
Care programme with a very gentle spin.
7.0
Same as the last rinse and the final spin in the “Cotton” programme.
7.0
In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.
Drain Vidange – – Drain only - no spinning. Alternative method of terminating programme after “Rinse hold”.
i
1)
: option / Yes : dosing required
For improved garment care spin speed is restricted in these programmes.
i
–
–
–
–
–
–
–
Yes
Yes
Yes
Yes
Yes
–
–
– i i i i i i
–
– i
–
–
–
–
–
–
– i i i i i
–
–
–
– i
–
–
– i
–
–
– i
–
–
–
–
–
– i i i i i i
–
– i i i i i i i
– i i i i i i i i
–
–
–
–
–
–
–
–
1000
Max.
Max.
1000
400
Max.
Max.
–
1)
1)
1)
Laden is a registered trademark of Whirlpool USA.
5019 601 01028
CONSUMPTION DATA
Programme
Cotton
Cotton **
Cotton **
Cotton
Cotton **
Eco Green
Synthetics
Synthetics
Temperature
(°C)
95
60
60
40
40
60
60
40
Load
(kg)
7.0
7.0
3.5
7.0
3.5
7.0
3.0
3.0
Water
(l)
74*
54
40
69
40
69
50*
46
Energy
(kWh) without “Rapid”
2.10
1.05
0.85
0.80
0.65
0.84
0.80
0.50
Approx. programme duration
(hours : minutes) without “Rapid” with “Rapid”
2:10
4:00
3:00
3:15
3:00
4:00
1:35
1:20
-
2:30
***
2:15
***
-
1:14
0:59
Delicates
Daily load
Quick wash
Wool
30
40
30
40
1.5
4.0
4.0
1.0
60
45
45
60
0.50
0.50
0.40
0.50
0:45
1:00
0:30
0:45
-
-
-
-
Handwash 40 1.0
45 0.50
0:40 -
Handwash 30 1.0
45 0.40
0:36 -
Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.Water and energy consumption refer to the default setting of the programmes; selecting special options or modifying spin speed or temperature will change the consumption data.
The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that time (see also “Troubleshooting Guide” in your Instructions for Use).
* To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
*** Automatic adaptation of programme duration after detection of wash load
ADD DETERGENTS, CLOSE THE DOOR AND
SELECT THE PROGRAMME
Add detergents as indicated on the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use.
• Turn the programme selector to the desired
programme and temperature.
• The indication lamp next to “ Start(Pause) ”
button blinks.
• The indication lamp of the predefined spin speed
lights up.
SELECT ANY DESIRED OPTION
Push the button of any option desired - the respective indication lamp lights up. If the combination of programme and additional option(s) is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically.
“Prewash” button
• Only for heavily soiled loads (for example sand,
granular dirt). Increases the cycle time by
approximately 15 min.
• Do not use liquid detergent for the main wash
when activating the “Prewash” option.
“Cold wash” button
• Water is heated only up to 20ºC.
• Suitable for delicate laundry items with wash
temperature recommendation of max. 30ºC on the
care label.
• Selectable only on the lowest temperature step
of each programme.
“Intensive rinse” button
• More water is added and rinse cycle is prolonged.
• This option is particularly suitable for areas with
very soft water, washing baby linen and helps
people with allergies.
“Easy ironing” button
• Can be used together with “Cotton”, “Synthetics”
and “Daily load” programmes to make ironing easier.
• Increases the water quantity and the clothes are spun
very gently.
“Rinse hold” button
• The laundry remains in the last rinse water
without pregressing to the final spin cycle to avoid
creasing and prevent colours from changing.
• This option is particularly recommended for the
programmes “Synthetics”, “Daily load” and
“Delicates”.
• It is particularly useful if you want to postpone
spinning to a later time, or if you want to drain only.
• If you select “Rinse hold” do not leave items to
soak for too long.
Note: The programme stops to “Rinse hold” at
the time the “Rinse hold” lights in the preogramme
sequence indication is on. The indication lamp next
to the “ Start(Pause) ” button flashes.
Terminate the “Rinse hold” option:
• Press the “ Start(Pause) ” button; the programme
will terminate automatically with the final spin
cycle for the present wash programme.
• If you do not wish to spin the clothes, turn the
programme selector knob to the “Drain”
programme and press the “ Start(Pause) ” button.
“Variable spin” button
• Every programme has a predefined spin speed.
• Press the button to set another spin speed.
• If spin speed “0” is selected, the final spinning is
cancelled but intermediate spin peaks remain during
the rinse. The water is drained out only.
“Rapid” button
• Enables quicker washing by shortening the
programme duration.
• Recommendable for small loads or only lightly
soiled laundry.
START DELAY
The “Start Delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper. Do not use liquid detergent when activating “Start delay” option.
• Select programme, temperature and options.
• Press the “Start Delay” button to select the delay
time by 1, 3, 6, 9 or 12 hours.
• Press the “ Start(Pause) ” button. The indication over
to the “Start Delay” button lights up and goes off
when the programme starts.
• Once having pressed the “ Start(Pause) ” button,
the countdown of the time delay begins. When
the programme starts, the start delay indicator
light goes off and is replaced by the programme
sequence indication.
• After the “ Start(Pause) ” button has been pressed,
the number of hours preselected can be reduced by
pressing again the “Start Delay” button.
To cancel the “Start Delay”
..before you press the “ Start(Pause) ” button:
• Turn the programme selector to another position or
press the “ Reset ” button.
..after having pressed the “ Start(Pause) ” button:
• Press the “ Reset ” button for at least 3 seconds -
the start delay indicator light goes out.
PROGRAMME START
Open the tap and press the “ Start(Pause) ” button.
The indication lamp next to the “ Start(Pause) ” button lights up. The programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Spin/Drain.
When the programme phase is finished, the corresponding indication goes out.
“DOOR OPEN” INDICATION
Before starting and after end of a programme, the lamp lights to show the the door can be opened. As long as a wash programme is running, the door remains locked and must on no account be forced open.
In case you have an urgent need to open it during a running programme, refer to “Cancel (Reset) a running programme before the end”.
FAILURE INDICATIONS
In case of any failures or irregularities, consult the
“Troubleshooting Guide” in your Instructions for Use.
“Service”
Lighting up of the “Service” indication can be caused by a fault in an electrical component.
“Water tap closed”
The washing machine has no or insufficient water supply; the water tap might be closed or the water inlet hose kinked.
“Clean pump”
Waste water is not pumped out. The drain hose may be kinked or the filter must be cleaned (see “Cleaning the filter” in your Instructions for Use).
PROGRAMME END
• All the lights of the programme sequence indicator
are off, and the “Door open” indication lights up.
1. Turn the programme selector to the “Off/O” position.
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry.
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
1. Press the “ Start(Pause) ” button to pause the
programme. The light flashes.
2. Select the new programme (with temperature),
any options and another spin speed if you want.
3. Press the “ Start(Pause) ” button again. The new
programme continues at the same position where
the previous programme was interrupted. Do not
add detergent for this programme.
CANCEL (RESET) A RUNNING PROGRAMME
BEFORE THE END
The “Reset” button cancels a programme before the end.
• Press and hold the “ Reset ” button for a few
seconds. Any existing water is drained out. It may last
some time until the door can be opened.
Laden is a registered trademark of Whirlpool USA.
5019 601 01028
