Whirlpool AWO/D 43115 Washing machine Program Chart

Whirlpool AWO/D 43115 offers a range of washing programs tailored to various fabrics and soil levels. Tackle heavily soiled items with the Cotton program, or opt for the Synthetics program for polyester and polyamide blends. Delicates receive gentle care in the Delicates program, while the Quick Wash program swiftly refreshes lightly soiled garments. Handwash provides a gentle touch for delicate fabrics, while the Wool program caters specifically to woolen items.

PDF

Document

GB AWO/D 43115

A. “Door open” indication

This washing machine is equipped with automatic safety functions which detect and diagnose faults at an early stage and react appropriately, e.g.:

B. “Service” indication

C. “Water tap closed” indication

D. “Clean pump” indication

PROGRAMME CHART

E F

Programme

Type of wash/Notes

Max

Load

Care

Labels

- For temperature selection, respect the manufacturer’s recommendations on the care label

Heavily soiled, long wearing and temperature stable textiles in cotton and linen (bed linen, table linen, underwear, shirts etc.).

5.0

Cotton with prewash

95 °C

Cotton

40 - 60 - 95 °C

95 °C

40 - 60 - 95 °C

Synthetics with prewash

60 °C

Synthetics

30 - 40 - 60 °C

Delicates

30 °C

Quick wash

30 °C

60 °C

30 - 40 - 60 °C

30 °C

Wool

Cold - 40 °C

- 40 °C

Handwash

30 - 40 °C

Rinse & Spin

Spin

Gentle Spin

—

Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.

Curtains and delicate clothing, dresses skirts, shirts and blouses.

Shortly worn outer clothing made of cotton, polyester, polyamide and blends with cotton.

Only woollens with a felt-free finish, labelled with the woolmark and identified as machine washable.

Textiles made of linen, silk, wool and viscose marked as “handwashable”.

Same as the last rinse and the final spin in the “Cotton” programme.

In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.

In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme.

Drain — Water is drained only without any spinning.

❉

: optional / Yes : dosing required

For improved garment care, spin speed is restricted to 400 rpm in this programme.

5.0

Heavily soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide

(Perlon, Nylon) or blends with cotton.

2.5

Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide

(Perlon, Nylon) or blends with cotton.

2.5

1.5

3.0

1.0

5.0

1.0

—

Yes

—

H. “Reset” button

Detergents and additives

Prewash

Main

Wash

Special options

Softener Intensive rinse

Spin speed reduction

Spin

Speed rpm

Yes Yes

❉ ❉ ❉

1000

Yes

—

E. Programme selector

F. “Start/Pause” button

G. Programme sequence indicator

❉

—

❉

—

1000

400

❉

—

❉

—

1000

—

Whirlpool is a registered trademark of Whirlpool USA

5019 301 10320

CONSUMPTION DATA

ADD DETERGENTS, CLOSE THE DOOR

AND SELECT THE PROGRAMME

Add detergent as indicated on the front page and as described in your Instructions for Use. Close the door and turn the programme selector to the desired programme and temperature. The indication lamp next to the “Start /Pause” button flashes.

Programme

Cotton

Cotton***

Cotton

Synthetics

Temperature

(°C)

Load

(kg)

5.0

2.5

Water

(l)

49**

50**

Energy

(kWh)

1.90

0.95

0.60

0.70

0.55

Approx. Programme

Duration

(hours : minutes)*

2:00

2:20

2:00

1:30

1:15

Delicates

Quick wash

Wool

1.5

3.0

1.0

0.50

0.40

0.60

0:45

0:30

0:45

Handwash

1.0

0.60

0.50

0:40

Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

* The remaining time indicator can deviate from the values in the table, because it takes into account the household conditions applicable at that time.

** To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.

*** Reference Programme for Energy Label.

SELECT ANY DESIRED OPTION

Push the button(s) of any option(s) desired - the respective indication lamp lights up.

When the combination of programme and additional option(s) is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically.

“Intensive rinse” button

• More water is added and rinse cycle is prolonged.

• This option is particularly suitable for areas with very soft water, washing baby linen and helps people with allergies.

“Spin speed reduction” button

• Reduces the predetermined automatic maximum spin speed to treat your laundry more gently.

PROGRAMME START

Open the tap and press the “Start/Pause” button.

The indication lamp next to the “Start/Pause” button lights up. The programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Spin/

Drain.

When the programme phase is finished, the corresponding indication goes out.

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the lamp lights to show that the door can be opened. As long as a wash programme is running, the door remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Cancel

(Reset) a running programme before the end”.

RED INDICATIONS

“Service”

Lighting up of the “Service” indication can be caused by a fault in an electrical component. Refer to the

“Troubleshooting Guide” in your “Instructions for

Use”; if the fault persists, contact our After Sales

Service.

“Water tap closed”

The appliance has no or insufficient water supply.

Open the water tap; if the indication still lights up, refer to the “Troubleshooting Guide” in the

Instructions for Use.

“Clean pump”

Waste water is not pumped out. Check whether the drain hose is kinked or the filter must be cleaned; in the latter case refer to the Instructions for Use

(“Removing the Filter”).

PROGRAMME END

• All the lights of the programme sequence indicator are off, and the “Door open” indication lights up.

1. Turn the programme selector to the “Off/O” position.

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

CHANGE PROGRAMME AND/OR OPTIONS

AFTER PROGRAMME START

1. Press the “Start/Pause” button to pause the programme. The light flashes.

2. Select the new programme (with temperature), any options and another spin speed if you want.

3. Press the “Start/Pause” button again. The new programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

CANCEL (RESET) A RUNNING

PROGRAMME BEFORE THE END

The “Reset” button cancels a programme before the end.

• Press the “Reset” button for at least 3 seconds. Any existing water is drained out before the door can be opened.

Whirlpool is a registered trademark of Whirlpool USA

5019 301 10320

Hello! I am an AI chatbot specifically trained to assist you with the Whirlpool AWO/D 43115 Program Chart. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!