GB PROGRAMME CHART
A. “Door open” indication
This washing machine is equipped with automatic safety functions which detect and diagnose faults at an early stage and react appropriately, e.g.:
C
D
B. “Service” indication
C. “Water tap closed” indication
D. “Clean pump” indication
G
A
B
H
E. Programme selector
F. “Start/Pause” button
G. Programme sequence indicator
H. “Reset” button
E F
Programme
Cotton with prewash 95 °C
Cotton
95 °C
Cotton
40 - 60 °C
Cotton Rapid
60 °C
Synthetics with prewash 60 °C
Synthetics
30 - 40 - 60 °C
Delicates
30 °C
Quick wash
30 °C
Wool
Cold - 40 °C
Handwash
40 °C
Rinse & Spin
Care
Labels
Max.
Load kg
5.0
5.0
5.0
5.0
2.5
2.5
1.5
3.0
Type of wash / Notes
Respect the manufacturer's recommendations on the care label
Heavily soiled, long wearing and temperature stable textiles in cotton and linen (bed linen, table linen, underwear, shirts etc.).
Normally to heavily soiled and robust white cotton laundry. In case of heavy soiling or stains, you can add an oxygenbased bleach additive which can be used at 95°C.
This programme eliminates bacteria, ensuring sanitization of your laundry.
Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.
Normally to heavily soiled cotton laundry washable at 60°C.
Faster alternative to “Cotton” programme for washing your cotton laundry at 60°C.
Heavily soiled laundry made of artificial fibres (like polyester, polyacryl, viscose etc.) or their blends with cotton.
Normally soiled garments made of artificial fibres (like polyester, polyacryl, viscose etc.) or their blends with cotton.
Curtains and delicate clothing, dresses, skirts, shirts and blouses.
Shortly worn clothing made of cotton, polyester, polyamide and blends with cotton.
Brief programme to refresh your laundry.
1.0
Only woollens with a felt-free finish, labelled with the woolmark and identified as machine washable.
–
1.0
Textiles made of linen, silk, wool and viscose marked as “handwashable”.
Care programme with a very gentle spin
5.0
Same as the last rinse and the final spin in the “Cotton” programme.
Spin – 5.0
In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.
Gentle Spin – 1.0
In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme.
Drain – – Drain only - no spinning. Alternative method of terminating programme after “Rinse hold” i
1)
:
2) option / Yes : dosing required
Do not use liquid detergent.
For improved garment care spin speed is restricted in these programmes.
Detergents and Additives
Pre- wash
Main
Wash
Special options
Softener Spin speed reduction
Yes
–
–
–
Yes
–
–
–
–
–
–
–
–
–
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
–
–
–
–
1)
1) i i i i i i i i i i i
–
–
–
X00 i i i i i i i i i i i i i
– i i i i i i i i i i i
–
–
–
Max. spin speed rpm
Max.
Max.
Max.
Max.
Max.
Max.
1000 2)
Max.
1000 2)
400 2)
Max.
Max.
1000 2)
–
Ignis is a registered trademark of Whirlpool USA.
5019 501 01014
CONSUMPTION DATA
Programme
Cotton
Cotton **
Cotton **
Cotton
Cotton **
Cotton Rapid
Synthetics
Synthetics
Delicates
Quick wash
Wool
Handwash
Temperature
40
40
60
60
(°C)
95
60
60
40
30
30
40
40
Load
(kg)
5.0
5.0
2.5
5.0
2.5
5.0
2.5
2.5
1.5
3.0
1.0
1.0
Water
(l)
53 *
44
32
49
32
44
50 *
45
50
40
55
45
Energy
(kWh)
1.70
0.75
0.65
0.60
0.55
0.85
0.70
0.50
0.50
0.40
0.60
0.60
Approx. Programme
Duration
(hours : minutes)
2:00
4 :00
2:20
2:45
2:30
2:30
1:30
1:15
0:45
0:30
0:45
0:40
Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.Water and energy consumption refer to the default setting of the programmes; selecting special options or modifying spin speed or temperature will change the consumption data.
The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that time (see also “Troubleshooting Guide” in your Instructions for Use).
* To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
** Reference programmes for Energy Label.
ADD DETERGENTS, CLOSE THE DOOR
AND SELECT THE PROGRAMME
Add detergents as indicated on the front page and as described in the chapter “Detergent and
Additives” in your Instructions for Use.
• Turn the programme selector to the desired
programme and temperature.
• The indication lamp next to “Start/Pause”
button blinks.
SELECT ANY DESIRED OPTION
Push the button(s) of any option(s) desired - the respective indication lamp lights up.
When the combination of programme and additional option(s) is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically.
“Spin speed reduction” button
• Reduces the predermined automatic
maximum spin speed to treat your laundry
more gently.
“Rinse hold” button
• The laundry remains in the last rinse water
without pregressing to the final spin cycle to
avoid creasing and prevent colours from
changing.
• This option is particularly recommended for the
programmes “Synthetics” and “Delicates”.
• It is particularly useful if you want to postpone
spinning to a later time, or if you want to drain
only.
• If you select “Rinse hold” do not leave items to
soak for too long.
Note: The programme stops to “Rinse hold” at
the time the “Rinse hold” lights in the
preogramme sequence indication is on. The
indication lamp next to the “Start/Pause”
button flashes.
Terminate the “Rinse hold” option:
• Press the “Start/Pause” button; the
programme will terminate automatically with
the final spin cycle for the present wash
programme.
• If you do not wish to spin the clothes, turn the
programme selector knob to the “Drain”
programme
button.
PROGRAMME START
Open the tap and press the “Start/Pause” button. The indication lamp next to the “Start/
Pause” button lights up. The programme sequence indicator shows the current programme phase, running from left to right through Wash,
Rinse, Spin/Drain.
When the programme phrase is finised, the corresponding indication goes out.
“DOOR OPEN” INDICATION
Before starting and after end of a programme, the lamp lights to show the the door can be opened.
As long as a wash programme is running, the door remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Cancel
(Reset) a running programme before the end”.
FAILURE INDICATIONS
In case of any failures or irregularities, consult the
“Troubleshooting Guide” in your Instructions for
Use.
“Service”
Lighting up of the “Service” indication can be caused by a fault in an electrical component.
“Water tap closed”
The washing machine has no or insufficient water supply; the water tap might be closed or the water inlet hose kinked.
“Clean pump”
Waste water is not pumped out. The drain hose may be kinked or the filter must be cleaned (see
“Cleaning the filter” in your Instructions for Use).
PROGRAMME END
• All the lights of the programme sequence
indicator are off, and the “Door open”
indication lights up.
1. Turn the programme selector to the “Off/O”
position.
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry.
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
1. Press the “Start/Pause” button to pause
the programme. The light blinks.
2. Select the new programme (with
temperature), any options and another spin
speed if you want.
3. Press the “Start/Pause” button again.
The new programme continues at the same
position where the previous programme
was interrupted. Do not add detergent for
this programme.
CANCEL (RESET) A RUNNING PROGRAMME
BEFORE THE END
The “Reset” button cancels a programme before the end.
• Press and hold the “Reset” button for a few
seconds. Any existing water is drained out.
It may last some time until the door can be
opened.
Ignis is a registered trademark of Whirlpool USA.
5019 501 01014
