GB EV 8025
A. Programme selector
B. Programme sequence indicator
C. “Start/Pause” button
D. “Reset” button
E. “Door open” indication
PROGRAMME CHART
G
H
B
E
F
D
This washing machine is equipped with automatic safety functions which detect and diagnose faults at an early stage and react appropriately:
F. “Service” indication
G. “Water tap closed” indication
H. “Clean pump” indication
1) Do not use liquid detergent.
2) For improved garment care, spin speed is restricted to 400 rpm in this programme.
A
C
Max.
Load
Type of wash / Notes
Programme
Cotton with prewash
95 °C
Cotton
40 - 60 - 95 °C
Coton
95°C
Coton
40 - 60 - 95°C
Synthetics with prewash
60 °C
Synthétique
60°C
Synthetics
30 - 40 - 60 °C
Delicates
30 °C
Quick wash
30 °C
Wool
Cold - 40 °C
Synthétique
30 - 40 - 60°C
Délicat
30°C
Rapide 30min.
Laine
Froid - 40°C
Care
Labels kg
- for temperature selection, respect the manufacturer's recommendations on the care label
5.0
Heavily soiled whites such as bed linen, table linen, underwear and towels made of cotton and linen.
5.0
2.5
2.5
Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.
Heavily soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon,
Nylon) or blends with cotton.
Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon,
Nylon) or blends with cotton.
1.5
Curtains and delicate clothing, dresses, skirts, shirts and blouses.
3.0
Shortly worn outer clothing made of cotton, polyester, polyamide and blends with cotton.
1.0
Only woollens with a felt-free finish, labelled with the woolmark and identified as machine washable.
Daily load
40 °C
Handwash
30 °C
Rinse & Spin
Spin
Gentle Spin
40°C
Lavage main
30°C
Rinçage &
Essorage
Essorage
Essorage court
–
–
–
3.0
Slightly to normally soiled textiles made of cotton and/or synthetics.
1.0
Textiles made of linen, silk, wool and viscose marked as “handwashable”.
5.0
Same as the last rinse and the final spin in the “Cotton” programme.
5.0
In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.
1.0
In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme.
Drain Vidange – – Drain only - no spinning. Alternative method of terminating programme after “Rinse hold”.
N.B. This machine is controlled by sensors. Please avoid excessive detergent dosing.
–
Yes
–
–
–
–
–
–
–
–
–
–
Detergents and Additives
Pre- wash
Main
Wash
Special options
Softener Spin speed reduction
Rinse hold
Essorage
400 trs
Arrêt cuve pleine
Yes Yes 1) i i i
Max.
Spin
Speed rpm
800
Yes
Yes 1)
Yes
Yes
Yes
Yes
Yes
Yes
–
–
–
– i i i i i i i i i i i i i i i i i i i i i
800
800
800
800
800
800
800 i i
–
–
–
– i i i
– i i
–
–
–
400 2)
800
800
800
–
Laden is a registered trademark of Whirlpool USA.
5019 612 10118
CONSUMPTION DATA
Programme
Cotton
Cotton**
Cotton
Synthetics
Synthetics
Delicates
Quick wash
Wool
Daily load
Handwash
Temperature
(°C)
95
60
40
60
40
40
30
40
40
40
Load
(kg)
5.0
5.0
5.0
2.5
2.5
1.5
3.0
1.0
3.0
1.0
Water
(l)
50*
50
55
50*
45
50
35
55
40
40
Energy
(kWh)
1.70
0.95
0.55
0.80
0.45
0.55
0.40
0.55
0.45
0.40
Approx. Programme
Duration
(hours : minutes)
2:05
2:10
2:00
1:30
1:15
0:45
0:30
0:45
1:00
0:35
Prewash cycle increases programme duration by aproximately 20 min. Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.
* To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
** Reference Programme for Energy Label.
PREPARATION OF THE WASH CYCLE
1. Load the machine, close the drum doors and check that they are properly locked.
2. Add detergent and additives into the dispenser to no more than the “MAX” level mark, as follows:
• Programme with pre and main wash
• Main wash programme without prewash
• Fabric softeners and conditioners
• Stain remover agents
• Anti-scale agents (if necessary)
3. Close the lid.
4. Turn the programme selector to the desired programme and temperature. The lamp next to the
“Start/Pause” button flashes.
SELECT THE DESIRED OPTION(S)
Selecting or deselecting an option can be done at any time during the programme. The option will be applied as long as the corresponding programme phase has not been executed yet.
“Spin speed reduction” button
• Reduces the predetermined automatic maximum spin speed to treat your laundry more gently.
“Rinse Hold” button
• The laundry remains in the last rinse water without progressing to the final spin cycle to avoid creasing and prevent colours from changing.
• This option is particularly recommended for the
“Synthetics”, “Delicates” and “Daily load” programmes.
• It is useful if you want to postpone spinning to a later time, or if you want to drain out only.
• If you select “Rinse Hold”, do not leave items to soak for too long.
• As soon as the appliance stops in the rinse hold, the
“Anticrease” lamp of the sequence indicator lights up and the lamp next to the “Start/Pause” button flashes.
Terminate the “Rinse Hold” option:
• Press the “Start/Pause” button; the programme will terminate automatically with the final spin cycle for the present wash programme.
• If you do not wish to spin the clothes, turn the programme selector knob to the “Drain” programme and press the “Start/Pause” button.
PROGRAMME START
Open the tap and press the “Start/Pause” button.
The indication lamp next to the “Start/Pause” button lights up. The programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Spin/Drain. When the programme phrase is finised, the corresponding indication goes out.
• Note: If there is a power interruption or if the appliance is disconnected during the cycle, the programme will run again from the point where it was interrupted.
“DOOR OPEN” INDICATION
Before starting and after end of a programme, the lamp lights to show the the lid can be opened. As long as a wash programme is running, the lid remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Cancel (Reset) a running programme before the end”.
RED INDICATIONS
“Service”
Lighting up of the “Service” indication can be caused by a fault in an electrical component. Refer to the
“Troubleshooting Guide” in your “Instructions for Use”; if the fault persists, contact our After Sales Service.
“Water tap closed”
The appliance has no or insufficient water supply. Open the water tap: if the indications still lights up, refer to the
“Troubleshooting Guide” in the Instructions for Use.
“Clean pump”
Waste water is not pumped out. Check whether the drain hose is kinked or the filter must be cleaned: in the latter case refer to the Instructions for Use (“Removing the Filter”).
PROGRAMME END
• All the lights of the programme sequence indicator are off, and the “Door open” indication lights up.
1. Turn the programme selector to the “Off/O” position.
2. Close the water tap.
3. Open lid and drum and unload the machine.
4. Leave the lid open for some time to allow the interior of the machine to dry.
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
1. Press the “Start/Pause” button to pause the programme. The light flashes.
2. Select the new programme, any options and another spin speed if you want.
3. Press the “Start/Pause” button again. The new programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.
CANCEL (RESET) A RUNNING PROGRAMME
BEFORE THE END
The “Reset” button cancels a programme before the end. Press the “Reset” button for at least 3 seconds.
Any existing water is drained out before the door can be opened.
Laden is a registered trademark of Whirlpool USA.
5019 612 10118
