GB AWD 593
A. “Door open” indication
This washing machine is equipped with automatic safety functions which detect and diagnose faults at an early stage and react appropriately, e.g.:
B. “Service” indication
C. “Water tap closed” indication
D. “Clean pump” indication
PROGRAMME CHART
C
D
G
E
A
B
E. Programme selector
F. “Start/Pause” button
G. Programme sequence indicator
F
H
H. “Reset” button
Programme
Cotton with prewash
95 °C
Cotton
40 - 60 - 95 °C
Synthetics with prewash
60 °C
Synthetics
30 - 40 - 60 °C
Delicates
30 °C
Type of wash/Notes
Max
Load
Care
Labels
- for temperature selection, respect the manufacturer’s recommendations on the care label
Heavily soiled, long wearing and temperature stable textiles in cotton and linen (bed linen, table linen, underwear, shirts etc.).
Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.
Heavily soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon,
Nylon) or blends with cotton.
Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide
(Perlon, Nylon) or blends with cotton.
kg
5.0
5.0
2.5
2.5
Curtains and delicate clothing, dresses skirts, shirts and blouses.
1.5
Quick wash
30 °C
Shortly worn outer clothing made of cotton, polyester, polyamide and blends with cotton.
Wool
Cold - 40 °C
Handwash
30 40 °C
Rinse & Spin —
Only woollens with a felt-free finish, labelled with the woolmark and identified as machine washable.
If you select “Rinse Hold” do not leave items to soak for too long.
Textiles made of linen, silk, wool and viscose marked as “handwashable”.
If you select “Rinse Hold” do not leave items to soak for too long. A very gentle spin is used in this programme.
Same as the last rinse and the final spin in the “Cotton” programme.
Spin
Gentle Spin
—
—
In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.
In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme.
Drain — Drain only - no spinning. Alternative method of terminating programme after “Rinse Hold”.
❉
: optional / Yes : dosing required
1)
For improved garment care, spin speed is restricted to 400 rpm in this programme.
3.0
1.0
1.0
5.0
5.0
1.0
—
—
Yes
—
—
—
—
—
—
—
—
—
Detergents and additives
Prewash
Main
Wash
Softener
Special options
Spin speed reduction
500 rpm
Rinse hold
Spin
Speed rpm
Yes Yes ❉ ❉ ❉ 1000
Yes
Yes
Yes
Yes
Yes
Yes
Yes
—
—
—
—
❉
❉
❉
❉
❉
❉
❉
❉
—
—
—
❉
❉
❉
❉
❉
❉
—
❉
❉
❉
—
❉
❉
❉
❉
❉
❉
❉
❉
—
—
—
1000
1000
1000
1000
1000
1000
400
1)
1000
1000
1000
—
5019 501 10114
CONSUMPTION DATA
Programme
Temperature
(°C)
Load
(kg)
Water
(l)
Energy
(kWh)
Approx. Programme
Duration
(hours : minutes)
Cotton
Cotton***
Cotton
Synthetics
Synthetics
Quick wash
Delicate
Wool
Handwash
Handwash
95
60
40
60
40
30
30
40
40
30
5.0
5.0
5.0
2.5
2.5
3.0
1.5
1.0
1.0
1.0
49**
44
44
50**
45
40
50
55
45
45
1.90
0.85
0.60
0.70
0.55
0.40
0.50
0.60
0.60
0.50
2:00
2:20
2:00
1:30
1:15
0:30
0:45
0:45
0:40
0:40
Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.
** To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
*** Reference Programme for Energy Label.
“Rinse hold” button
ADD DETERGENTS, CLOSE THE DOOR
AND SELECT THE PROGRAMME
• The laundry remains in the last rinse water without progressing to the final spin cycle to avoid
Add detergent as indicated on the front page and as creasing and prevent colours from changing.
described in your Instructions for Use. Close the
• This option is particularly recommended for the door and turn the programme selector to the programmes “Synthetics” and “Delicates”.
desired programme and temperature. The indication
• This function is particularly useful if you want to lamp next to the “Start /Pause” button flashes.
postpone spinning to a later time, or if you want
SELECT ANY DESIRED OPTION to drain only.
Push the button(s) of any option(s) desired - the respective indication lamp lights up.
When the combination of programme and additional option(s) is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically.
“Spin speed reduction 500 rpm” button
Note: The programme stops to “Rinse hold” at the time the “Rinse hold” light in the programme sequence indicator is on. The indication lamp next to the “Start/Pause” button flashes.
Terminate the “Rinse hold” option:
• Press the “Start/Pause” button; the programme will terminate automatically with the final spin cycle for the present wash programme.
• Reduces the predetermined automatic maximum spin speed to treat your laundry more gently.
• If you do not wish to spin the clothes, turn the programme selector knob to the “Drain” programme and press the “Start/Pause” button.
PROGRAMME START
Open the tap and press the “Start/Pause” button.
The indication lamp next to the “Start/Pause” button lights up. The programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Spin/Drain.
When the programme phase is finished, the corresponding indication goes out.
“DOOR OPEN” INDICATION
Before starting and after end of a programme, the lamp lights to show that the door can be opened. As long as a wash programme is running, the door remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Cancel
(Reset) a running programme before the end”.
RED INDICATIONS
“Service”
Lighting up of the “Service” indication can be caused by a fault in an electrical component. Refer to the
“Troubleshooting Guide” in your “Instructions for
Use”; if the fault persists, contact our After Sales
Service.
“Water tap closed”
The appliance has no or insufficient water supply.
Open the water tap; if the indication still lights up, refer to the “Troubleshooting Guide” in the
Instructions for Use.
“Clean pump”
Waste water is not pumped out. Check whether the drain hose is kinked or the filter must be cleaned; in the latter case refer to the Instructions for Use
(“Removing the Filter”).
PROGRAMME END
• All the lights of the programme sequence indicator are off, and the “Door open” indication lights up.
1. Turn the programme selector to the “Off/O” position.
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry.
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
1. Press the “Start/Pause” button to pause the programme. The light flashes.
2. Select the new programme (with temperature), any options and another spin speed if you want.
3. Press the “Start/Pause” button again. The new programme continues at the same position where the previous programme was interrupted.
Do not add detergent for this programme.
CANCEL (RESET) A RUNNING
PROGRAMME BEFORE THE END
The “Reset” button cancels a programme before the end.
• Press the “Reset” button for at least 3 seconds. Any existing water is drained out before the door can be opened.
5019 501 10114
