Ignis LTE 1069 Washing machine Program Chart

Ignis LTE 1069 offers a range of features to make your laundry experience effortless and efficient. With a generous 6 kg load capacity, it can accommodate even bulky items like blankets or curtains. Choose from 16 different wash programs tailored to specific fabrics and soil levels, including delicate, wool, and sports. The LED display provides clear visibility of the selected settings and the remaining wash time. Take advantage of the time-saving options like Rapid Wash for lightly soiled items or Delay Start to schedule your wash cycle at a convenient time.

PDF

Document

A. Programme selector

B. “Start delay” button

C. Programme sequence indicator

(over the line)

Start delay indicator (next to the line)

D. “Variable spin” button

E. “Start/Pause” button

F. “Reset” button

G. “Door open” indication

Programme

Care

Labels

PROGRAMME CHART

B D

This washing machine is equipped with automatic safety functions which detect and diagnose faults at an early stage and react appropriately:

H. “Service” indication

I. “Water tap closed” indication

J. “Clean pump” indication

1) Do not use liquid detergent for main wash if you have activated prewash option.

2) Do not use liquid detergent.

3) For improved garment care, spin speed is restricted to 400 rpm in this programme.

Max.

Load kg

5.5

3.0

Type of wash / Notes

- for temperature selection, respect the manufacturer's recommendations on the care label

Detergents and Additives

Pre- wash

Main

Wash

Softener Start delay

Avvio ritardato

Prewash

Prelavaggio

Special options

Half load

Mezzo carico

Intensive rinse

Risciacquo intensivo

Rinse hold

Anti piega

Variable spin

Centrifuga

Max.

Spin

Speed rpm

Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.

For washing heavily soiled laundry, the “Prewash” option can be selected.

Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon).

i i

Yes

1) i i i i

2) i i i i i i i i i i max.

max.

1.5

Curtains and delicate clothing, dresses, skirts, shirts and blouses.

i Yes 1) i i

2) i – – i i max.

Cotton

40 - 60 - 95 °C

Synthetics

30 - 40 - 60 °C

Delicates

30 - 40 °C

Daily load

40 °C

Quick wash

30 °C

Wool

Cold - 40 °C

Handwash

40 °C

Cotone

40 - 60 - 95°C

Sintetici

30 - 40 - 60°C

Delicati

30 - 40°C

40°C

Rapido

Lana

Freddo - 40°C

Lavaggio a mano

40°C

Eco Green

60 °C

Rinse & Spin

Spin

Gentle Spin

Drain

60°C

Risciacquo &

Centrifuga

Centrifuga breve

Scarico acqua

–

3.0

Slightly to normally soiled textiles made of cotton and/or synthetics.

–

3.0

Shortly worn outer clothing made of cotton, polyester, polyamide and blends with cotton.

–

1.0

5.5

Only woollens with a felt-free finish, labelled with the woolmark and identified as machine washable.

Textiles made of linen, silk, wool and viscose marked as “handwashable”.

A very gentle spin is used in this programme.

Heavily soiled and robust laundry made of cotton, synthetics and their blends.

Economical energy consumption by prolonged wash duration -ideal to be run overnight to profit from the more favourable energy rates. Avoid noise of spinning at night by setting spin speed to “0” and start spin programme in the morning, or by defining programme start with “Start Delay” accordingly. - For garments with a high share of synthetics fibres, we recommended to use a laundry net

5.5

Same as the last rinse and the final spin in the “Cotton” programme.

–

5.5

In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.

–

1.0

In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme.

– Drain only - no spinning. Alternative method of terminating programme after “Rinse hold”.

–

N.B. This machine is controlled by sensors. Please avoid excessive detergent dosing.

Yes = dosing required / i = optional

Yes

–

– i i i i i i

–

– i

2) i

2) i i i i

–

– i i

–

– i i

–

– i i i i i i

–

– i i i i i i i i

– max.

max.

400 3) max.

max.

–

5019 512 10099

CONSUMPTION DATA

Programme

Cotton

Cotton**

Cotton

Cotton**

Synthetics

Delicates

Daily load

Quick wash

Wool

Handwash

Eco Green

Temperature

(°C)

Load

(kg)

5.5

2.75

5.5

2.75

3.0

1.5

3.0

1.0

5.5

Water

(l)

54*

55*

Energy

(kWh)

1.75

0.93

0.77

0.65

0.55

0.90

0.55

0.45

0.40

0.55

0.73

Approx. Programme

Duration

(hours : minutes)

2:05

2:45

2:15

2:10

1:50

1:40

1:25

0:45

1:00

0:30

0:45

0:35

4:00

Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash. Water and energy consumption refer to the default setting of the programmes; selecting special options or modifying spin speed or temperature will change the consumption data.

The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that time (see also “Troubleshooting Guide” in your Instructions for Use).

* To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.

** Reference programmes for Energy Label.

PREPARATION OF THE WASH CYCLE

1. Load the machine, close the drum doors and check that they are properly locked.

2. Add detergent and additives into the dispenser to no more than the “MAX” level mark, as follows:

• Programme with pre and main wash

• Main wash programme without prewash

• Fabric softeners and conditioners

• Stain remover agents

• Anti-scale agents (if necessary)

3. Close the lid.

4. Turn the programme selector to the desired programme and temperature. The lamp next to the

“Start/Pause” button flashes. The indication lamp of thepredefined spin speed lights up.

SELECT THE DESIRED OPTION(S)

Selecting or deselecting an option can be done at any time during the programme. The option will be applied as long as the corresponding programme phase has not been executed yet.

“Prewash” button

• Only for heavily soiled loads (for example sand, granular dirt) sensible. Increases the cycle time by approximately 20 min.

“Half load” button

• Reduces water consumption, above all during rinsing.

• Suitable for lightly soiled laundry and small loads

(max. 3 kg)

“Intensive rinse” button

• The amount of water is increased to ensure a more intensive rinse.

• This option is particularly suitable for areas with very soft water, washing baby linen and people with skin allergies.

“Rinse hold” button

• The laundry remains in the last rinse water without progressing to the final spin cycle to avoid creasing and prevent colours from changing.

• This option is particularly recommended for the

“Synthetics”, “Daily load 60´” and “Delicates” programmes.

• It is useful if you want to postpone spinning to a later time, or if you want to drain out only.

• If you select “Rinse Hold”, do not leave items to soak for too long.

• As soon as the appliance stops in the rinse hold, the

“Rinse hold” lamp of the sequence indicator lights up and the lamp next to the “Start/Pause” button flashes.

Terminate the “Rinse hold” option:

• Press the “Start/Pause” button; the programme will terminate automatically with the final spin cycle for the present wash programme.

• If you do not wish to spin the clothes, turn the programme selector knob to the “Drain” programme and press the “Start/Pause” button.

“Variable spin” button

• Every programme has a predefined spin speed.

• Press the button to set another spin speed.

• If spin speed “0” is selected, the final spinning is cancelled but intermediate spin peaks remain during the rinse. The water is drained out only.

START DELAY

The “Start delay” button allows the user to run the machine at his convenience, for example at night when electricity is cheaper.

• Select programme, spin speed and options.

• Press the “Start Delay” button several times to select a delay time of 1, 3, 6, 9 or 12 hours.

The corresponding indicator lamp lights up.

• Start the programme (see “Progremme Start”).

The indication next to the “Start delay” button lights up and goes off when the programme starts.

• Once having pressed the “Start/Pause” button, the countdown of the time delay begins. When the programme starts, the start delay indicator light goes off and is replaced by the programme sequence indication.

• After the “Start/Pause” button has been pressed, the number of hours preselected can be reduced by pressing again the “Start delay” button.

To cancel the “Start delay”

..before you press the “Start/Pause” button:

• Turn the programme selector to another position or press the “Reset” button.

..after having pressed the “Start/Pause” button:

• Press the “Reset” button for at least 3 second. The start delay indicator light goes off.

PROGRAMME START

Open the tap and press the “Start/Pause” button.

The indication lamp next to the “Start/Pause” button lights up. The programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Spin/Drain. When the programme phrase is finised, the corresponding indication goes out.

• Note: If there is a power interruption or if the appliance is disconnected during the cycle, the programme will run again from the point where it was interrupted.

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the lamp lights to show the the lid can be opened. As long as a wash programme is running, the lid remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Cancel (Reset) a running programme before the end”.

FAILURE INDICATIONS

In a case of any failures of irregularities, consult the

“Troubelshooting Guide” in Instruction for Use.

“Service”

Lighting up of the “Service” indication can be caused by a fault in an electrical component. Refer to the

“Troubleshooting Guide” in your “Instructions for Use”; if the fault persists, contact our After Sales Service.

“Water tap closed”

The appliance has no or insufficient water supply. Open the water tap: if the indications still lights up, refer to the

“Troubleshooting Guide” in the Instructions for Use.

“Clean pump”

Waste water is not pumped out. Check whether the drain hose is kinked or the filter must be cleaned: in the latter case refer to the Instructions for Use (“Removing the Filter”).

PROGRAMME END

• All the lights of the programme sequence indicator are off, and the “Door open” indication lights up.

1. Turn the programme selector to the “Off/O” position.

2. Close the water tap.

3. Open lid and drum and unload the machine.

4. Leave the lid open for some time to allow the interior of the machine to dry.

CHANGE PROGRAMME AND/OR OPTIONS

AFTER PROGRAMME START

1. Press the “Start/Pause” button to pause the programme. The light flashes.

2. Select the new programme, any options and another spin speed if you want.

3. Press the “Start/Pause” button again. The new programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

CANCEL (RESET) A RUNNING PROGRAMME

BEFORE THE END

The “Reset” button cancels a programme before the end. Press the “Reset” button for at least 3 seconds.

Any existing water is drained out before the door can be opened.

5019 512 10099

Hello! I am an AI chatbot specifically trained to assist you with the Ignis LTE 1069 Program Chart. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!