Advertisement
Advertisement
www.freeservicemanuals.info 3/29/2018 HX-Z1R HX-Z1R SERVICE MANUAL COMPACT COMPONENT SYSTEM HX-Z1R COMPACT DIGITAL AUDIO SO UND MODE PRESET L VO UME Area Suffix B ----------------------- U.K. E-------- Continental Europe EN----------Northern Europe EV------------Eastern Europe Contents Safety precautions Preventing static electricity Important for laser products Disassembly method Adjustment method 1-2 1-4 1-5 1-6 1-24 Flow of functional operation until TOC read (CD) Maintenance of laser pickup Replacement of laser pickup Description of major ICs COPYRIGHT 2002 in VICTOR COMPANY OF JAPAN, LTD. Digitized Heiloo Netherlands 1-29 1-30 1-30 1-31~41 No.21114 1-1 Jul. 2002 www.freeservicemanuals.info 3/29/2018 HX-Z1R 1. This design of this product contains special hardware and many circuits and components specially for safety purposes. For continued protection, no changes should be made to the original design unless authorized in writing by the manufacturer. Replacement parts must be identical to those used in the original circuits. Services should be performed by qualified personnel only. 2. Alterations of the design or circuitry of the product should not be made. Any design alterations of the product should not be made. Any design alterations or additions will void the manufacturer`s warranty and will further relieve the manufacture of responsibility for personal injury or property damage resulting therefrom. 3. Many electrical and mechanical parts in the products have special safety-related characteristics. These characteristics are often not evident from visual inspection nor can the protection afforded by them necessarily be obtained by using replacement components rated for higher voltage, wattage, etc. Replacement parts which have these special safety characteristics are identified in the Parts List of Service Manual. Electrical components having such features are identified by shading on the schematics and by ( ) on the Parts List in the Service Manual. The use of a substitute replacement which does not have the same safety characteristics as the recommended replacement parts shown in the Parts List of Service Manual may create shock, fire, or other hazards. 4. The leads in the products are routed and dressed with ties, clamps, tubings, barriers and the like to be separated from live parts, high temperature parts, moving parts and/or sharp edges for the prevention of electric shock and fire hazard. When service is required, the original lead routing and dress should be observed, and it should be confirmed that they have been returned to normal, after re-assembling. 5. Leakage currnet check (Electrical shock hazard testing) After re-assembling the product, always perform an isolation check on the exposed metal parts of the product (antenna terminals, knobs, metal cabinet, screw heads, headphone jack, control shafts, etc.) to be sure the product is safe to operate without danger of electrical shock. Do not use a line isolation transformer during this check. Plug the AC line cord directly into the AC outlet. Using a "Leakage Current Tester", measure the leakage current from each exposed metal parts of the cabinet, particularly any exposed metal part having a return path to the chassis, to a known good earth ground. Any leakage current must not exceed 0.5mA AC (r.m.s.). Alternate check method Plug the AC line cord directly into the AC outlet. Use an AC voltmeter having, 1,000 ohms per volt or more sensitivity in the following manner. Connect a 1,500 10W resistor paralleled by a 0.15 F AC-type capacitor between an exposed metal part and a known good earth ground. AC VOLTMETER Measure the AC voltage across the resistor with the AC (Having 1000 ohms/volts, voltmeter. or more sensitivity) Move the resistor connection to each exposed metal part, particularly any exposed metal part having a return path to 0.15 F AC TYPE the chassis, and meausre the AC voltage across the resistor. Place this Now, reverse the plug in the AC outlet and repeat each probe on measurement. Voltage measured any must not exceed 0.75 V each exposed AC (r.m.s.). This corresponds to 0.5 mA AC (r.m.s.). 1500 10W metal part. Good earth ground 1. This equipment has been designed and manufactured to meet international safety standards. 2. It is the legal responsibility of the repairer to ensure that these safety standards are maintained. 3. Repairs must be made in accordance with the relevant safety standards. 4. It is essential that safety critical components are replaced by approved parts. 5. If mains voltage selector is provided, check setting for local voltage. ! Burrs formed during molding may be left over on some parts of the chassis. Therefore, pay attention to such burrs in the case of preforming repair of this system. In regard with component parts appearing on the silk-screen printed side (parts side) of the PWB diagrams, the parts that are printed over with black such as the resistor ( ), diode ( ) and ICP ( ) or identified by the " " mark nearby are critical for safety. (This regulation does not correspond to J and C version.) 1-2 Digitized in Heiloo Netherlands www.freeservicemanuals.info 3/29/2018 HX-Z1R (U.K only) 1. This design of this product contains special hardware and many circuits and components specially for safety purposes. For continued protection, no changes should be made to the original design unless authorized in writing by the manufacturer. Replacement parts must be identical to those used in the original circuits. 2. Any unauthorised design alterations or additions will void the manufacturer's guarantee ; furthermore the manufacturer cannot accept responsibility for personal injury or property damage resulting therefrom. 3. Essential safety critical components are identified by ( ) on the Parts List and by shading on the schematics, and must never be replaced by parts other than those listed in the manual. Please note however that many electrical and mechanical parts in the product have special safety related characteristics. These characteristics are often not evident from visual inspection. Parts other than specified by the manufacturer may not have the same safety characteristics as the recommended replacement parts shown in the Parts List of the Service Manual and may create shock, fire, or other hazards. 4. The leads in the products are routed and dressed with ties, clamps, tubings, barriers and the like to be separated from live parts, high temperature parts, moving parts and/or sharp edges for the prevention of electric shock and fire hazard. When service is required, the original lead routing and dress should be observed, and it should be confirmed that they have been returned to normal, after re-assembling. 1. Service should be performed by qualified personnel only. 2. This equipment has been designed and manufactured to meet international safety standards. 3. It is the legal responsibility of the repairer to ensure that these safety standards are maintained. 4. Repairs must be made in accordance with the relevant safety standards. 5. It is essential that safety critical components are replaced by approved parts. 6. If mains voltage selector is provided, check setting for local voltage. ! Burrs formed during molding may be left over on some parts of the chassis. Therefore, pay attention to such burrs in the case of preforming repair of this system. Digitized in Heiloo Netherlands 1-3 www.freeservicemanuals.info 3/29/2018 HX-Z1R Preventing static electricity 1. Grounding to prevent damage by static electricity Electrostatic discharge (ESD), which occurs when static electricity stored in the body, fabric, etc. is discharged, can destroy the laser diode in the traverse unit (optical pickup). Take care to prevent this when performing repairs. 2. About the earth processing for the destruction prevention by static electricity In the equipment which uses optical pick-up (laser diode), optical pick-up is destroyed by the static electricity of the work environment. Be careful to use proper grounding in the area where repairs are being performed. 2-1 Ground the workbench Ground the workbench by laying conductive material (such as a conductive sheet) or an iron plate over it before placing the traverse unit (optical pickup) on it. 2-2 Ground yourself Use an anti-static wrist strap to release any static electricity built up in your body. (caption) Anti-static wrist strap Conductive material (conductive sheet) or iron plate 3. Handling the optical pickup 1. In order to maintain quality during transport and before installation, both sides of the laser diode on the replacement optical pickup are shorted. After replacement, return the shorted parts to their original condition. (Refer to the text.) 2. Do not use a tester to check the condition of the laser diode in the optical pickup. The tester's internal power source can easily destroy the laser diode. 4. Handling the traverse unit (optical pickup) 1. Do not subject the traverse unit (optical pickup) to strong shocks, as it is a sensitive, complex unit. 2. Cut off the shorted part of the flexible cable using nippers, etc. after replacing the optical pickup. For specific details, refer to the replacement procedure in the text. Remove the anti-static pin when replacing the traverse unit. Be careful not to take too long a time when attaching it to the connector. 3. Handle the flexible cable carefully as it may break when subjected to strong force. 4. It is not possible to adjust the semi-fixed resistor that adjusts the laser power. Do not turn it Attention when traverse unit is decomposed *Please refer to "Disassembly method" in the text for pick-up and how to detach the CD traverse mechanism. 1. Remove the disk stopper and T. bracket on the CD changer mechanism assembly. 2. Disconnect the harness from connector on the CD motor board. 3. CD traverse unit is put up as shown in Fig.1. 4. Solder is put up before the card wire is removed from connector CN601 on the CD servo control board as shown in Fig. 2. (When the wire is removed without putting up solder, the CD pick-up assembly might destroy.) 5. Please remove solder after connecting the card wire with CN601 when you install picking up in the substrate. 1-4 CD changer mechanism assembly CD traverse unit Fig.1 Flexible cable Digitized in Heiloo Netherlands Soldering Fig.2 www.freeservicemanuals.info 3/29/2018 HX-Z1R Important for laser products 5.CAUTION : If safety switches malfunction, the laser is able 1.CLASS 1 LASER PRODUCT 2.DANGER : Invisible laser radiation when open and inter lock failed or defeated. Avoid direct exposure to beam. 3.CAUTION : There are no serviceable parts inside the Laser Unit. Do not disassemble the Laser Unit. Replace to function. 6.CAUTION : Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. the complete Laser Unit if it malfunctions. 4.CAUTION : The compact disc player uses invisible laserradiation and is equipped with safety switches whichprevent emission of radiation when the drawer is open and the safety interlocks have failed or are de ! CAUTION Please use enough caution not to see the beam directly or touch it in case of an adjustment or operation check. feated. It is dangerous to defeat the safety switches. VARNING : Osynlig laserstrålning är denna del är öppnad ADVARSEL : Usynlig laserstråling ved åbning , når och spårren är urkopplad. Betrakta ej strålen. VARO sikkerhedsafbrydere er ude af funktion. Undgå : Avattaessa ja suojalukitus ohitettaessa olet alttiina näkymättömälle lasersäteilylle.Älä katso udsættelse for stråling. ADVARSEL : Usynlig laserstråling ved åpning,når säteeseen. sikkerhetsbryteren er avslott. unngå utsettelse for stråling. REPRODUCTION AND POSITION OF LABELS WARNING LABEL CLASS 1 LASER PRODUCT Digitized in Heiloo Netherlands 1-5 www.freeservicemanuals.info 3/29/2018 HX-Z1R Disassembly method A Metal cover <Main board> Removing the metal cover (See Fig.1 ~ 3) 1. Remove the six screws A on the back of the body. A A 2. Remove the screw B on each side of the body. 3. Remove the metal cover from the body by lifting the rear part of the cover. CAUTION: Do not break the front panel tab fitted to the metal cover. Fig.1 Metal cover Removing the CD changer mechanism assembly (See Fig.4, 5) Prior to performing the following procedure, remove the metal cover. 1. Disconnect the card wire from connector CN651 on the CD servo control board on the right bottom of the CD changer mechanism assembly. B Fig.2 Metal cover 2. Remove the four screws C attaching the CD changer mechanism assembly on top of the body. 3. Remove the CD changer mechanism assembly while lifting the rear part. CAUTION: Do not damage the CD fitting when removing the CD changer mechanism assembly. CD changer mechanism assembly Front panel assembly B Rear part Fig.3 C C CD changer mechanism assembly C CD servo control board CN651 Fig.4 1-6 Fig.5 Digitized in Heiloo Netherlands www.freeservicemanuals.info 3/29/2018 HX-Z1R Removing the front panel assembly (See Fig.6 ~ 9) Front panel assembly Bridge board CN701 Prior to performing the following procedure, remove the metal cover and the CD changer mechanism assembly. 1. Disconnect the card wire from connector CN44 and CN870 on the main board on the right side of the body. Remove the screw D attaching the wire from extending from the underside of the front panel assembly. Main board Joint a 2. Disconnect the wire from connector CN701 on the bridge board. CN44 CN870 D Fig.6 3. Cut the tie band. Primary board CN231, CN232 Front panel assembly 4. Disconnect the wire from connector CN231 and CN232 on the primary board on the left side of the body and remove the band fixing the wire. 5. Remove the plastic rivet attaching the inner bar in the center of the front panel assembly. REFERENCE: Keep the plastic rivet for reuse. 6. Remove the three screws E attaching the front panel assembly at the bottom of the body. Bottom chassis Joint a Fig.7 7. Release the two joints a on the lower left and right sides of the front panel assembly using a screwdriver, and remove the front panel assembly toward the front. Inner bar Plastic rivet Front panel assembly REFERENCE: Front panel need to be tilt a little bit as release from bottom chassis. Band Primary board CN231, CN232 Bridge board CN701 Fig.8 Front panel assembly E Digitized in Heiloo Netherlands Fig.9 1-7 www.freeservicemanuals.info 3/29/2018 HX-Z1R Removing the antenna board (See Fig.10, 11) Antenna board Prior to performing the following procedure, remove the metal cover. CN1 REFERENCE: There is no need to remove the CD changer mechanism assembly. 1. Disconnect the card wire from connector CN1 on the antenna board on the right side of the body. 2. Remove the band attaching the antenna board. Band 3. Remove the two screws F on the rear panel on the back of the body. Fig.10 Rear panel F Fig.11 1-8 Digitized in Heiloo Netherlands Rear panel www.freeservicemanuals.info 3/29/2018 HX-Z1R Removing the rear panel Tie band (See Fig.12 ~ 17) Prior to performing the following procedure, remove the metal cover and the CD changer mechanism assembly. 1. Remove holding board by remove two plastic rivets and then slide out the holding board as shown in fig. 12. Inner bar Joint b Fan assembly 2. Disconnect fan wire from connector CN206. Holding board Plastic Rivets Fig.12 3. Cut off the tie band that tied fan wire on inner bar. 4. Remove eight screws F from rear panel. 5. Detach joint b to release rear panel from inner bar. 6. Release joints c which on right bottom and left bottom of rear panel. The joint can be release by pull outward the side of rear panel. Holding board REFERENCE: Fan assembly will come off with rear panel. CN206 Fig.13 CN206 Rear panel Fig.14 Rear panel Joint c Fig.16 Rear panel F F F Joint c Fig.17 F Fig.15 Digitized in Heiloo Netherlands 1-9 www.freeservicemanuals.info 3/29/2018 HX-Z1R Removing the fan assembly (See Fig.18, 19) Prior to performing the following procedure, remove the metal cover and the CD changer mechanism assembly and the rear panel. G 1. Remove two screws G on the rear panel. 2. Rotate fan assembly in clockwise direction to release fan assembly from rear panel (joint d). Rear panel Fig.18 Joint d Fan assembly Joint d Fig.19 Removing the main board (See Fig.20) CN217 Prior to performing the following procedure, remove the metal cover, the CD changer mechanism assembly, the antenna board and the rear panel. 1. Disconnect the card wire from connector CN44 and CN870 on the main board. Main board CN870 2. Remove the screw D attaching the board. 3. Disconnect connector CN217 and CN311 on the main board outward and release from the base chassis (joint e) upward. CN44 D CN311 Fig.20 1-10 Digitized in Heiloo Netherlands Joint e www.freeservicemanuals.info 3/29/2018 HX-Z1R Plastic rivet Removing the bridge board / regulator board / heat sink (See Fig.21 ~ 27) Prior to performing the following procedure, remove the metal cover, the CD changer mechanism assembly, the rear panel, the antenna board and main board. Inner bar 1. Remove the plastic rivet attaching the stay inner bar and remove the screw H on the bridge board. 2. Move the inner bar forward and upward to release from the front section (joint f) and from the bridge board (two joints h) respectively. 3. Remove the two plastic rivets setting the holding board fixing the bridge board and the primary board. Move the bracket board in the direction of the arrow. Bridge board H Fig.21 Joint f Inner bar 4. Disconnect the wire from connector CN212, CN213 and CN214 on the primary board respectively and remove the band attaching the wires. Plastic rivet 5. Disconnect the wire from connector CN701 on the bridge board. 6. Remove the two screws I attaching the heat sink bracket and move the heat sink in the direction of the arrow to release from the base chassis. The bridge board and the regulator board come off with the heat sink. Joint g Fig.22 CN212, CN213 Primary board CN214 Plastic rivets Holding board Bridge board Fig.23 Band Bridge board CN701 Bridge board I CN212, CN213 Regulator board Heat sink I Heat sink bracket Primary board CN214 Fig.24 Fig.25 Digitized in Heiloo Netherlands 1-11 www.freeservicemanuals.info 3/29/2018 HX-Z1R 7. Remove the two screws J attaching the heat sink bracket. Bridge board 8. Remove the two screws M, detach bridge board from regulator board by disconnect connector CN205. 9. Remove the screws K and L to detach regulator board from heat sink. CAUTION: As assembly back the regulator board and bridge board to heat sink. Regulator board MUST be assembly to heat sink first and screw K and L MUST be screwed before bridge board attach to regulator board. Heat sink Regulator board Heat sink bracket J Fig.26 Heat sink bracket Regulator board K Bridge board Heat sink CN205 M L Fig.27 1-12 Digitized in Heiloo Netherlands CN215 www.freeservicemanuals.info Removing assembly the 3/29/2018 HX-Z1R power transformer (See Fig.28, 29) Prior to performing the following procedure, remove the metal cover, the CD changer mechanism assembly, the rear panel, the main board and the bridge board / regulator board. Power transformer assembly 1. Remove the screw N attaching the primary board. 2. Disconnect the wire from connector CN231 and CN232 on the primary board. 3. Remove the four screws O transformer assembly. N Primary board attaching the power Fig.28 4. Cut the tie band and detach power cord from primary board. Primary board CN231, CN232 REFERENCE: When disconnecting the power cord from connector CN250 on the primary board, remove the fixing band. Power transformer assembly CN250 Band O O <Front panel assembly> Fig.29 Prior to performing the following procedure, remove the metal cover, the CD changer mechanism assembly and the front panel assembly. Removing assembly the cassette Cord stopper Head amplifier & mechanism control board CN33 mechanism (See Fig.30) 1. Disconnect the card wire from connector CN33 on the head amplifier & mechanism control board. P Q 2. Remove the two screws P, and the screw Q attaching the cassette mechanism assembly. Removing the headphone board (See Fig.30) Cassette mechanism assembly 1. Remove the screw Q attaching the wire extending from the headphone board. Headphone board QR Fig.30 2. Remove the screw R and pull out the headphone board backward. Digitized in Heiloo Netherlands 1-13 www.freeservicemanuals.info 3/29/2018 HX-Z1R S Removing the display system control board (See Fig.31, 32) 1. Remove the four screws S bracket (1). attaching the stay 2. Disconnect the card wire from connector CN43 and CN880 on the display system control board. Remove the ten screws T system control board. Display system control board Stay bracket (1) attaching the display CN43 CN880 Fig.31 T Display system control board Removing the bottom board (See Fig.33 ~ 35) Prior to performing the following procedure, remove the display system control board. T T T T 1. Pull out preset knob, sound mode knob on the front panel toward the front. 2. Remove the nut at volume knob encoder from front panel. 3. Remove the four screws U bracket (2). CN43 T CN880 Fig.32 attaching the stay Front panel 4. Remove the eight screws V attaching the bottom board. Sound mode knob Volume knob Preset knob Fig.33 Stay bracket (2) U V Bottom board U V Bottom board Fig.34 1-14 Fig.35 Digitized in Heiloo Netherlands V www.freeservicemanuals.info 3/29/2018 HX-Z1R A Removing the CD Servo control board (See Fig.1) 1.Remove the metal cover. 2.Remove the CD changer mechanism assembly. 3.From bottom side the CD changer mechanism assembly, remove the four screws A retaining the CD servo control board. 4.Absorb the four soldered positions "a" of the right and left motors with a soldering absorber. 5.Pull out the earth wire on the CD changer mechanism assembly. 6.Disconnect the connector CN854 on the CD servo control board. 7.Disconnect the card wire CN601 and the connector CN801 on the CD servo control board. a a CN854 A CN651 CD servo control board CN652 CN801 CN151 CN601 Removing the CD tray assembly (See Fig.2~4) 1. Remove the front panel assembly. 2. Remove the CD changer mechanism assembly. 3. Remove the CD Servo control board. 4. Remove the screw B' retaining the lod stopper. 5. From the T.bracket section "b" and clamper base section "c" , remove both of the edges fixing the rod(See Fig.2 and 3). 6. Remove the screw B retaining the disc stopper (See Fig.3). 7. Remove the three screws C retaining the T.bracket (See Fig.3). 8. Remove the screw D retaining the clamper assembly (See Fig.3). 9. From the left side face of the chassis assembly, remove the one screw E retaining both of the return spring and lock lever(See Fig. 4). 10. By removing the pawl at the section "d" fixing the return spring, dismount the return spring(See Fig.4). 11. Remove the three lock levers(See Fig.4). Earth wire A Fig.1 A Clamper base b Rod c T.Braket Fig.2 Disc stopper T.Braket d B C C B' a Lod stopper (C/J version only) Return spring C D b Lock lever Clamper ass'y E Fig.4 Fig.3 Digitized in Heiloo Netherlands 1-15 www.freeservicemanuals.info 3/29/2018 HX-Z1R Stopper 11. Check whether the lifter unit stopper has been caught into the hole at the section "e" of CD tray assembly as shown in Fig.5. 12. Make sure that the driver unit elevator is positioned as shown in Fig.6 from to the second or fifth hole on the left side face of the CD changer mechanism assembly. [Caution] In case the driver unit elevator is not at above position, set the elevator to the position as shown in Fig.7 by manually turning the pulley gear as shown in Fig.8. e 13. Manually turn the motor pulley in the clockwise direction until the lifter unit stopper is lowered from the section "e" of CD tray assembly(See Fig.8). 14. Pull out all of the three stages of CD tray assembly in the arrow direction "f" until these stages stop (See Fig.6). 15. At the position where the CD tray assembly has stopped, pull out the CD tray assembly while pressing the two pawls "g and g' " on the back side of CD tray assembly(See Fig.9). In this case, it is easy to pull out the assembly when it is pulled out first from the stage CD tray assembly. CD tray assembly Fig.5 Chassis assembly f CD tray assembly Refer to Fig.7 Fig.7 Pawl g Drive unit of elevator Fig.6 CD 3 CD 2 CD 1 CD tray assembly Pulley gear Motor pulley Pawl g , g' Fig.8 1-16 Fig.9 Digitized in Heiloo Netherlands www.freeservicemanuals.info 3/29/2018 HX-Z1R Cams R1, R2 assembly Removing the CD loading mechanism assembly(See Fig.10) 1. While turning the cams R1 and R2 assembly in the arrow direction "h" ,align the shaft "i" of the CD loading mechanism assembly to the position shown in Fig.10. 2. Remove the four screws F retaining the CD loading mechanism assembly. Removing the CD traverse mechanism (See Fig.11 and 12 ) Arrow h i F F 1. For dismounting only the CD traverse mechanism without removing the CD loading mechanism assembly, align the shaft "j" of the CD loading mechanism assembly to the position shown Fig.11 while turning the cam R1 and R2 assembly in the arrow direction "k" . 2. By raising the CD loading mechanism assembly in the arrow direction "l", remove the assembly from the lifter unit F F Cam R1, R2 assembly CD loading mechanism assembly Fig.10 CD traverse mechanism Arrow k j Lifter unit Arrow l Fig.11 Fig.12 CD Pickup unit Removing the CD pick unit (See Fig.13 ) 1. Move the cam gear in the arrow direction "m" . Then, the CD pickup unit will be moved in the arrow direction "n" . 2. According to the above step, shift the CD pickup unit to the center position. 3. While pressing the stopper retaining the shaft in the arrow direction "o" , pull out the shaft in the arrow direction "p". 4. After dismounting the shaft from the CD pickup unit, remove the CD pickup unit n CD loading mechanism m Shaft Cam gear Shaft Shaft p o Stopper Stopper Fig.13 Digitized in Heiloo Netherlands 1-17 www.freeservicemanuals.info 3/29/2018 HX-Z1R Removing the try select switch board (See Fig.14) Chassis assembly 1. Remove the two screws G retaining the tray select switch board. 2. Disconnect the tray select switch board from connector CN804 on the CD servo control board. Tray select switch board CN854 Removing the cam unit (See Fig.15 ~17 ) 1. Remove the CD loading mechanism assembly. 2. While turning the cam gear "q", align the Paul "r" position of the drive unit to the notch position(Fig.16) on the cam gear "q". 3. Pull out the drive unit and cylinder gear(See Fig.17). 4. While turning the cam gear "q", align the Paul "s" position of the select lever to the notch position(Fig.18) on the cam gear "q". 5. Remove the four screws H retaining the cam unit(cam gear "q" and cams R1/R2 assembly)(See Fig.18). CN851 CN804 G Fig.14 Cam gear q Drive unit r Fig.15 Drive unit Cylinder gear H Cam gear q Cams R1, R2 assembly Cam unit J H s Fig.16 Select lever Fig.17 1-18 Digitized in Heiloo Netherlands www.freeservicemanuals.info 3/29/2018 HX-Z1R Removing the actuator motor and belt (See Fig.18~21) Gear bracket 1. Remove the two screws I retaining the gear bracket (See Fig.18). 2. While pressing the pawl "t" fixing the gear bracket in the arrow direction, remove the gear bracket (See Fig.18). 3. From the notch "u section" on the chassis assembly fixing the edge of gear bracket, remove and take out the gear bracket(See Fig. 19). 4. Remove the belts respectively from the right and left actuator motor pulleys and pulley gears(See Fig. 18). 5. After turning over the chassis assembly, remove the actuator motor while spreading the four pawls "v" fixing the right and left actuator motors in the arrow direction(See Fig. 20). [Note] When the chassis assembly is turned over under the conditions wherein the gear bracket and belt have been removed, then the pulley gear as well as the gear, etc. constituting the gear unit can possibly be separated to pieces. In such a case, assemble these parts by referring to the assembly and configuration diagram in Fig. 21. Pulley gear Belt Motor pulley I Pawl t Pulley gear Belt Motor pulley I Fig.18 Actuator motor Chassis assembly u v Gear bracket v Fig.20 Fig.19 Assembly and Configuration Diagram Pulley gear Gear B Pulley gear Cylinder gear Gear B Gear C Select gear Gross gear L Gross gear U Gear C Fig.21 Digitized in Heiloo Netherlands 1-19 www.freeservicemanuals.info 3/29/2018 HX-Z1R Slit washer Removing the cams R1/R2 assembly and cam gear q(See Fig.22) Cam R2 Slit washer 1. Remove the slit washer fixing the cams R1 and R2 assembly. 2. By removing the two pawls "w" fixing the cam R1, separate R2 from R1. 3. Remove the slit washer fixing the cam gear "q". 4. Pull out the cam gear "q" from the C.G. base assembly. Cam gear q J Pawl w Cam R1 Removing the C.G. base assembly (See Fig.22 and 23) Pawl w Remove the three screws J retaining the C.G. base assembly. [Caution] To reassemble the cylinder gear, etc.with the cam unit (cam gear and cans R1/R2 assembly), gear unit and drive unit, align the position of the pawl "x" on the drive unit to that of the notch on the cam gear "q". Then, make sure that the gear unit is engaged by turning the cam gear "q" (See Fig. 24). Cam switch board C.G. base assembly Fig.22 Cam gear q Cam R1, R2 assembly Notch Pawl x Gear unit Cylinder gear Drive unit Gear bracket Fig.23 1-20 Digitized in Heiloo Netherlands www.freeservicemanuals.info 3/29/2018 HX-Z1R <Cassette mechanism section> Cassette mechanism Removing the playback / recording & eraser head (See Fig. 1 ~ 3) 1. While shifting the trigger arms seen on the right side of the head mount in the arrow direction, turn the flywheel R in counterclockwise direction until the head mount has gone out with a click (See Fig. 1). Flywheel (R) 2. When the flywheel (R) is rotated in counterclockwise direction, the playback / recording & eraser head will be turned in counterclockwise direction from the position in Fig. 2 to that in Fig. 3. 3. At this position, disconnect the flexible P.C. board (outgoing from the playback / recording & eraser head) from the connector CN31 on the head amplifier & mechanism control P.C. board. Trigger arm Head mount Fig. 1 Playback / recording & eraser head 4. Remove the flexible P.C. board from the chassis base. Spring a Flexible board Trigger arm 5. Remove the spring a from behind the playback / recording & eraser head. 6. Loosen the reversing azimuth screw retaining the playback / recording & eraser head. 7. Take out the playback / recording & eraser head from the front of the head mount. 8. The playback / recoring & eraser head should also be removed similarly according to steps 1 to 7 above. Reassembling the playback / recording & eraser head (See Fig.2, 3) 1. Reassemble the playback head from the front of the head mount to the position as shown in Fig. 3. CN31 Head amplifier & mechanism control P.C. board Flywheel (R) Fig. 2 Playback / recording & eraser head Reversing azimuth screw Head mount Spring 1 2. Fix the reversing azimuth screw. Flexible board 3. Set the spring 1 from behind the playback / recording & eraser head. 4. Attach the flexible P.C. board to the chassis base, as shown in Fig. 3. 5. The playback / recording & eraser head should also be reassembled similarly to step 1 to 4 above. Digitized in Heiloo Netherlands Head amplifier & mechanism control P.C. board Fig. 3 1-21 www.freeservicemanuals.info 3/29/2018 HX-Z1R A Removing the head amplifier & mechanism control board (See Fig. 4) A Belt 1. Remove the cassette mechanism assembly. Main motor assembly CN32 2. After turning over th cassette mechanism assembly, remove the three screws A retaining the head amplifier & mechanism control board. B 3. Disconnect the connector CN32 on the board including the connector CN1 on the reel pulse P.C. board. CN31 4. When necessary, remove the 4 pin parallel wire Head amplifier & mechanism control soldered to the main motor. B A board 4pin parallel wire Flexible board Main motor assembly Fig. 4 Removing the main motor assembly (See Fig.4 ~ 6) 1. Remove the two screws B retaining the main motor assembly (See Fig. 4 and 4a). Main motor assembly Capstan belt 2. While raising the main motor, remove the capstan belt from the motor pulley (See Fig. 4a). CAUTION: Be sure to handle the capstan belt so carefully that this belt will not be stained by grease and other foreign matter. Moreover, this belt should be hanged while referring to the capstan belt hanging method in Fig. 5 and 6. Motor pulley Fig. 4a Mechanism motor assembly Main motor assembly Flywheel Capstan belt Motor pulley Capstan belt Fig. 6 Fig. 5 1-22 Motor pulley Digitized in Heiloo Netherlands www.freeservicemanuals.info 3/29/2018 HX-Z1R Removing the flywheel (See Fig. 7, 8) 1. Remove the head amplifier & mechanism control P.C. board. 2. Remove the main motor assembly. 3. After turning over the cassette mechanism, remove the two slit washers and fixing the capstan shafts R and L, and pull out the flywheel (R) and (L) respectively from behind the cassette mechanism. Flywheel (R) Flywheel (L) Capstan shaft (R) Capstan shaft (L) Slit washer Slit washer Flywheel R Flywheel L Fig. 8 Fig. 7 Removing the reel pulse P.C. board and solenoid (See Fig. 9) 1. Remove the five pawls a to e reattaining the reel pulse board. 2. From the surface of the reel pulse board parts, remove the two pawls f and g retaining the solenoid. Reel pulse board a f b c d e g Solenoid Fig. 9 Digitized in Heiloo Netherlands 1-23 www.freeservicemanuals.info 3/29/2018 HX-Z1R Adjustment method Tuner section Measurement Instruments Required for Adjustment 1. Low frequency oscillator This oscillator should have a capacity to output 0dBs to 600 at an oscillation frequency of 50Hz-20kHz. 2. Attenuator impedance : 600 3. Electronic voltmeter 4. Distortion meter 5. Frequency counter 6. Wow & flutter meter 7. Test tape VTT703L : Head azimuth VT712 : Tape speed and running unevenness (3kHz) VT724 : Reference level (1kHz) 8. Blank tape TYPE : AC-225 TYPE : AC-514 9. Torque gauge : For play and back tension FWD(TW2111A), REV(TW2121a) and FF/REW(TW2231A) 10. Test disc: CTS-1000 Measurement conditions Power supply voltage AC120V (60Hz) : Ver.J,C Reference output : Speaker : 0.775V/4 : Headphone : 0.077V/32 Reference frequency and input level ------------------------------ 1kHz, AUX : -8dBs Measurement output terminal ------- at Speaker J3002 Load resistance --------------------------- 4 Radio Input signal AM frequency --------------------------------------- 400Hz AM modulation ---------------------------------------- 30% FM frequency --------------------------------------- 400Hz FM frequency deviation ------------------------ 22.5kHz 1-24 FM Band cover: 87.5 108MHz MW Band cover: 522 1,629kHz LW Band cover: 144 288kHz Voltage applied to tuner +B : DC5.7V VT : DC 12V Reference measurement output 26.1mV(0.28V)/3 Input positions AM : Standard loop antenna FM : TP1 (hot) and TP2 (GND) Standard measurement position of volume Function switch to Tape Beat cut switch to Cut Super Bass/Active hyper Bass to OFF Bass Treble to Center Adjustment of main volume to reference output VOL : 28 Precautions for measurement 1. Apply 30pF and 33k to the IF sweeper output side and 0.082 F and 100k in series to the sweeper input side. 2. The IF sweeper output level should be made as low as possible within the adjustable range. 3. Since the IF sweeper is a fixed device, there is no need to adjust this sweeper. 4. Since a ceramic oscillator is used, there is no need to perform any MIX adjustment. 5. Since a fixed coil is used, there is no need to adjust the FM tracking. 6. The input and output earth systems are separated. In case of simultaneously measuring the voltage in both of the input and output systems with an electronic voltmeter for two channels, therefore, the earth should be connected particularly carefully. 7. In the case of BTL connection amp., the minus terminal of speaker is not for earthing. Therefore, be sure not to connect any other earth terminal to this terminal. This system is of an BTL system. 8. For connecting a dummy resistor when measuring the output, use the wire with a greater code size. 9. Whenever any mixed tape is used, use the band pass filter (DV-12). Digitized in Heiloo Netherlands www.freeservicemanuals.info 3/29/2018 HX-Z1R <<Arrangement of Adjusting Position>> Cassette mechanism section Cassette mechanism section (Back side) Head azimuth adjusting screw (Forward side) Head azimuth adjusting screw (Forward side) Head azimuth adjusting screw (Reverse side) Head azimuth adjusting screw (Reverse side) Playback/Recording & eraser head 1 B153 C205 R106 R206 R204 R104 B161 C374 C209 C331 B162 C371 C202 C210 R215 B164 C121 R121 R221 C301 6 C333 16 C332 R339 C334 1 B110 CN31 R345 Q331 9 IC33 R331 C203 R201 1IC31 1 8 B167 R301 R305 R207 B113 R101 R338 R337 B109 C109 R222 Q203 R203 C204 R202 Q201 16 B108 R107 C206 B168 C101 C201 9 B112 C305 R115 C110 B163 C221 B159 8 R116 R216 C102 1 R103 C103 Q101 VR31 C207 C107 R122 C375 R208 B160 C304 B106 C302 R108 R102 C104 Q103 C106 C208 IC32 9 B157 Q321 C303 R303 R335 C316 C319 R340 B200 C111 Q305 R310 L303 C317 B155 C108 R372 R373 E Q371 R205 R105 C105 C213 R210 R209 C306 B158 B156 B Q372 R304 C313 R353 Q302 R327 R212 R211 C211 B D375 Q376 B166 VR37 R314 C308 R315 C310 R313 R112 C113 R111 R110 R109 B198 C314 L301 R375 C376 Q375 E R336 B152 C307 MOTOR SPEED VR37 R371 10 CN32 R343 CN33 R342 B151 CN34 B102 9 R376 1 10 R341 1 NC TAP RRE SOL MG 5V PHO PLA FRE 70u B101 RECL AG RECR SW8V PBL AG PBR MS MB MG Cassette AMP board BIAS ADJ VR31 Digitized in Heiloo Netherlands 1-25 www.freeservicemanuals.info 3/29/2018 HX-Z1R Tape Recorder Section Items Measurement conditions Measurement method Standard Values Confirmation Test tape 1 Playback the test tape VTT703L (8kHz) Maximum of head angle : VTT703L (8kHz) 2 With the recording & playback mechanism, output Measurement output adjust the head azimuth screw so that the terminal forward and reverse output levels become : Speaker terminal maximum. After adjustment, lock the head Speaker R azimuth at least by half turn. (Load resistance: 4 ) 3 In either case, this adjustment should be : Headphone terminal performed in both the forward and reverse directions with the head azimuth screw. Confirmation Test tape of tape speed : VT712 (3kHz) Measurement output terminal : Headphone terminal Adjusting positions Adjust the head azimuth screw only when the head has been changed. Adjust VR37 so that the frequency counter Tape speed VR37 reading becomes 2,940~3,090Hz when of deck playing back the test tape VT712 (3kHz) with : 2,940 ~ playback and recording mechanism after 3,090Hz ending forward winding of the tape. Reference Values for Confirmation Items Items Measurement conditions Measurement method Standard Values Test tape When the test tape VT712 (3kHz) has been 6.0Hz or Difference : VT712 (3kHz) played back with the recording and playback less between the Measurement output mechanism at the beginning of forward forward and terminal winding, the frequency counter reading of the reverse speed : Speaker terminal difference between both of the mechanism Speaker R should be 6.0Hz or less. (Load resistance: 4 ) Measurement output terminal : Headphone Wow & flutter Test tape : VT712 (3kHz) Measurement output terminal : Headphone terminal 1-26 When the test tape VT712 (3kHz) has been 0.25% or played back with the recording and playback less mechanism at the beginning of forward (WRMS) winding, the frequency counter reading of wow & flutter should be 0.25% or less (WRMS). Digitized in Heiloo Netherlands Adjusting positions Head azimuth screw www.freeservicemanuals.info 3/29/2018 HX-Z1R Electrical Performance Items Measurement conditions Measurement method Standard Values Adjusting positions AC-225 Adjustment of Mode: Forward or 1 With the recording and playback recording bias reverse mode mechanism, load the test tapes (AC-514 to : 4.20 A Recording mode current and AC-225 to TYPE ), and set AC-514 TYPE : 4.0 A Test tape (Reference the mechanism to the recording and : AC-514 to TYPE Value) pausing condition in advance. and AC-225 to 2 After connecting 100 in series to the TYPE recorder head, measure the bias current Measurement output with a valve voltmeter at both of the terminal terminals. : Both recording and 3 After resetting the [PAUSE] mode, start headphone terminals recording. At this time, adjust VR31 for Lch and VR32 for Rch so that the recording bias current values become 4.0 A (TYPE ) and 4.20 A (TYPE ). VR31 Adjustment of Reference frequency recording and : 1kHz and 10kHz playback (REF.: -20dB) frequency Test tape characteristics : AC-514 to TYPE Measurement input terminal : OSC IN VR31 1 With the recording and playback Output mechanism, load the test tapes (AC-514 to deviation TYPE ), and set the mechanism to the between recording and pausing condition in 1kHz and advance. 10kHz 2 While repetitively inputting the reference : -1dB 2dB frequency signal of 1kHz and 10kHz from OSC IN, record and playback the rape. 3 While recording and playback the test tape in TYPE , adjust VR31 for Lch and VR32 for Rch so that the output deviation between 1kHz and 10kHz becomes -1dB 2dB. Reference Values for Electrical Function Confirmation Items Items Measurement conditions Measurement method Standard Values Recording bias frequency Forward or reverse 100 kHz 1 While changing over to and from BIAS 1 Test tape 6 kHz and 2, confirm that the frequency is : TYPE (AC-514) changed. Measurement 2 With the recording and playback terminal : BIAS TP on mechanism, load the test tape. P.C. board (AC-514 to TYPE ), and set the mechanism to the recording and pausing condition in advance. 3 Confirm that the BIAS TP frequency on the P.C. board is 100kHz 6kHz. Eraser current (Reference value) 1 While recording and playback mechanism, TYPE Forward or reverse load the test tapes (AC-514 to TYPE Recording mode : 120 mA Test tape and AC-225 to TYPE ), and set the TYPE : AC-514 to TYPE mechanism to the recording and pausing : 75 mA and AC-225 to conditions in advance. TYPE 2 After setting to the recording conditions, Measurement connect 1W in series to the eraser head on terminal : Both of the the recording and playback mechanism eraser head terminals side, and measure the eraser current from both of the eraser terminals. Digitized in Heiloo Netherlands Adjusting positions 1-27 www.freeservicemanuals.info 3/29/2018 HX-Z1R Extension code connecting method CD servo control board CN651 1-28 Main board CN661 Digitized in Heiloo Netherlands www.freeservicemanuals.info 3/29/2018 HX-Z1R Flow of functional operation until TOC read Check Point Play Key Power ON Slider turns REST SW ON. Confirm that the voltage at the pin5 of CN801 is "H"\"L"\"H". Automatic tuning of TE offset Check that the voltage at the Laser ON pin40 of IC651 is + 5V? Detection of disc Automatic tuning of Focus offset Automatic measurement of Focus S-curve amplitude Confirm that the Focus error S-cuve signal at the pin28 of IC651 is approx.2Vp-p Disc is rotated Confirm that the signal from pin24 IC651 is 0V as a accelerated pulse during approx.400ms. Tracking error waveform at TOC reading pin 25 of IC601(TE) Focus servo ON (Tracking servo ON) Approx.3sec Approx 1.8V VREF Automatic measurement of Tracking error amplitude Disc states to rotate Tracking Disc to be servo braked to stop on states TOC reading finishes measurement Tracking servo off states Automatic of TE amplitude and automatic tuning of TE balance Confirm the waveform of the Tracking error signal. at the pin 25 of IC601 (R604) (See fig-1) Automatic tuning of Tracking error balance 500mv/div 2ms/div Fig.1 Automatic tuning of Focus error balance Automatic tuning of Focus error gain Automatic tuning of Tracking error gain TOC reading Confirm the eys-pattern at the lead of TP1 Play a disc Digitized in Heiloo Netherlands 1-29 www.freeservicemanuals.info 3/29/2018 HX-Z1R Maintenance of laser pickup (1) Cleaning the pick up lens Before you replace the pick up, please try to clean the lens with a alcohol soaked cotton swab. (2) Life of the laser diode When the life of the laser diode has expired, the following symptoms will appear. Replacement of laser pickup Turn off the power switch and, disconnect the power cord from the ac outlet. Replace the pickup with a normal one.(Refer to "Pickup Removal" on the previous page) 1. The level of RF output (EFM output : ampli tude of eye pattern) will below. Is the level of RFOUT under 1.25V 0.22Vp-p? NO Replace it. Plug the power cord in, and turn the power on. At this time, check that the laser emits for about 3seconds and the objective lens moves up and down. Note: Do not observe the laser beam directly. YES Play a disc. O.K Check the eye-pattern at TP1. Finish. (3) Semi-fixed resistor on the APC PC board The semi-fixed resistor on the APC printed circuit board which is attached to the pickup is used to adjust the laser power. Since this adjustment should be performed to match the characteristics of the whole optical block, do not touch the semi-fixed resistor. If the laser power is lower than the specified value, the laser diode is almost worn out, and the laser pickup should be replaced. If the semi-fixed resistor is adjusted while the pickup is functioning normally, the laser pickup may be damaged due to excessive current. 1-30 Digitized in Heiloo Netherlands www.freeservicemanuals.info 3/29/2018 HX-Z1R Description of major ICs BU2092 (IC642) : Port expander 1.Pin Layout 1 Vss 18 Vdd DATA 2 17 CLOCK 3 OE 16 Q11 CONTROL CIRCUIT 5 Q1 6 Q2 7 Q3 8 Q4 9 12BIT SHIFT RESISTER Q0 15 Q10 12BIT STRAGE RESISTER 4 OUTPUT BUFFER(OPEN DRAIN) LCK 14 Q9 13 Q8 12 Q7 11 Q6 10 Q5 2.Pin function Pin No. Symbol I/O Function 1 Vss - Connect to GND 2 DATA I Serial Data input 3 CLOCK I Shift Clock of Data 4 LCK I Latch Clock of Data 5~16 Q0~Q11 O Parallel Data Output Latch Data L H OUTPUT ON OFF 17 OE I Output Enable 18 Vdd - Power Supply Digitized in Heiloo Netherlands 1-31 www.freeservicemanuals.info 3/29/2018 HX-Z1R BH3874AKS (IC434) : Audio sound processor 1. Pin layout 48 ~ 33 49 32 ~ ~ 64 17 1 ~ 16 2. Block diagram BASS4 BASS3 BASS2 BASS1 HPFL3 63 64 3 4 7 8 11 12 15 HPFL2 HPFL1 DPLR1 F5L PS2 59 60 57 58 F4L2 F4L1 F3L2 F3L1 F2L2 F2L1 F1L2 F1L1 PS1 62 DPLL2 DPLL1 RECL DPLR2 MIC 61 VFC2 51 VFC1 53 55 56 17 18 19 23 24 25 26 Vcc 30 VCC -9dB 1 2 Vcc INLD 47 11dB INLB 43 + - INLA 41 + 10K 10K + PS + EFFECT L-R + 19dB + + + 32 OUTL + - 5 BAND EQ + + + - 54 GND + PS MODE SELECTOR + + - + - + 27 BASS5 VCA + FILTER 29 CAP L+R 5 BAND EQ 11dB + + + 10.5Hz INRB 44 + + + - 31 OUTR DET INRC 46 10.5Hz HPP DET INRD 48 10.5Hz -9dB DET DIGITAL CONTROL MPX 10.5Hz 35 SCK 34 SI DET RECR 52 10.5Hz + - ALC ALCB ALCC HPFR3 Digitized in Heiloo Netherlands HPFR2 F5R F4R2 F4R1 F3R2 F3R1 F2R2 F2R1 F1R2 F1R1 49 BPOUT 50 C 20 21 22 B BPNF 36 37 38 39 1 2 5 6 9 10 13 14 16 HPFR1 22K 33 STEPC DET A 40 1-32 28 FILTER HPP -30dB~- 0~30dB INLC 45 INRA 42 + www.freeservicemanuals.info 3/29/2018 HX-Z1R 3. Pin function Pin NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 Name F1R1 F1R2 F2L1 F2L2 F2R1 F2R2 F3L1 FAL2 F3R1 F3R2 F4L1 F4L2 F4R1 F4R2 F5L F5R HPFL1 HPFL2 HPFL3 HPFR1 HPFR2 HPFR3 BASS1 BASS2 BASS3 BASS4 BASS5 FILTER CAP VCC OUTR OUTL 33 STEPC Function Rch GREQ f1 filter setting pin Rch GREQ f1 filter setting pin Lch GREQ f2 filter setting pin Lch GREQ f2 filter setting pin Rch GREQ f2 filter setting pin Rch GREQ f2 filter setting pin Lch GREQ f3 filter setting pin Lch GREQ f3 filter setting pin Rch GREQ f3 filter setting pin Rch GREQ f3 filter setting pin Lch GREQ f4 filter setting pin Lch GREQ f4 filter setting pin Rch GREQ f4 filter setting pin Rch GREQ f4 filter setting pin Lch GREQ f5 filter setting pin Rch GREQ f5 filter setting pin Lch high-pass filter setting pin Lch high-pass filter setting pin Lch high-pass filter setting pin Rch high-pass filter setting pin Rch high-pass filter setting pin Rch high-pass filter setting pin Dynamic bass filter setting pin Dynamic bass filter setting pin Dynamic bass filter setting pin Dynamic bass filter setting pin Biamp output pin VCC/2 pin ALC trap frequency setting pin Power supply pin Rch output pin Lch output pin Time conatant attachment for switching shook protection Pin NO. 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 Digitized in Heiloo Netherlands Name SI SCK A B C BPOUT BPNF INLA INRA INLB INRB INLC INRC INLD INRD ALCC ALCR RECL REOR VFC1 GND VFC2 MIC DPLL1 DPLL2 DPLR1 DPLR2 PS1 PS2 F1L1 F1L2 Function Serial data larch receiving pin Serial clook receiving pin Parallel data receiving pin Parallel data receiving pin Parallel data receiving pin Output pin for spectrum analyzer Spectrum analyzer level setting pin Lch input pin A Rch input pin A Lch input pin B Rch input pin B Lch input pin C Rch input pin C Lch input pin D Rch input pin D Time constant of ALC setting pin ALC level setting pin Lch RECOUT output pin Rch RECOUT output pin Vocal fade filter setting pin Ground pin Vocal fade filter setting pin Input pin for microphone Lch output pin for DPL Lch input pin for DPL Rch output pin for DPL Rch input pin for DPL Surround setting pin Surround setting pin Lch GREQ f1 filter setting pin Lch GREQ f1 filter setting pin 1-33 www.freeservicemanuals.info 3/29/2018 HX-Z1R KIA7805API (IC360) : Regulator 1. Pin layout 1.VCC 2.GND 3.OUTPUT 1 2 3 R1 1 INPUT 3 OUTPUT 2 COMMON (GND) R26 R17 R22 2.Block diagram Q11-1 Q11 Q15 Q19 Q6 Q1 R9 R7 R2 Z1 R11 R18 Q18 R20 R12 R19 Q17 R14 R16 Q14 R15 Q12 R10 Q16 C1 Q10 Q7 R3 Q13 R21 Q2 Q4 1-34 Q9 Q8 R8 R6 Q5 R5 R4 R13 Q3 Digitized in Heiloo Netherlands www.freeservicemanuals.info 3/29/2018 HX-Z1R KIA7808API (IC303) : Regulator 1. Pin layout 1.VCC 2.GND 3.OUTPUT 1 2 3 R1 1 INPUT 3 OUTPUT 2 COMMON (GND) R26 R17 R22 2.Block diagram Q11-1 Q11 Q15 Q19 R9 R7 R2 R11 C1 Q10 Q7 R3 Q13 R21 Q2 Q4 Q9 Q8 R8 R6 Q5 R5 R4 Q3 R13 Z1 R15 Q6 Q1 R18 Q18 R20 R12 R19 Q17 R14 R16 Q14 R10 Q16 Q12 Digitized in Heiloo Netherlands 1-35 www.freeservicemanuals.info 3/29/2018 HX-Z1R KIA7812API (IC240) : Regulator 1. Pin layout 1.VCC 2.GND 3.OUTPUT 1 2 3 R1 1 INPUT 3 OUTPUT 2 COMMON (GND) R26 R17 R22 2.Block diagram Q11-1 Q11 Q15 Q19 R9 R7 R2 R11 Z1 R15 Q6 Q1 R18 Q18 R20 R12 R19 Q17 R14 R16 Q14 R10 Q16 Q12 C1 Q10 Q7 R3 Q13 R21 Q2 Q4 1-36 Q9 Q8 R8 R6 Q5 R5 R4 R13 Q3 Digitized in Heiloo Netherlands www.freeservicemanuals.info 3/29/2018 HX-Z1R KIA7042AP-T (IC830) : Regulator 2. Block diagram 1. Pin layout 1 2 3 1.VCC 2.GND 3.OUT NJM4580D (IC501, IC502, IC571) : LPF, Mic and H.phone amp. 1. Pin layout A OUT 1 A -IN 2 A 8 V+ 7 B OUT B A +IN 3 6 B -IN V- 4 5 B +IN (TOP VIEW) 2. Block diagram V + INPUT + OUTPUT V- Digitized in Heiloo Netherlands 1-37 www.freeservicemanuals.info 3/29/2018 HX-Z1R GP1U271XK (IC951) : Receiver for remote + – Limiter Amp. B.P.F Integrator Demodulator GND Comparator VCC Vout STK402-050 (IC602) : 2ch AF power amp. 1.Pin layout 1 ~ 15 2.Block diagra 8 4 TR7 TR9 R13 R1 TR1E TR4 R6 R8 C1 1 C2 TR5 TR1 TR2 R11 R3 TR10 TR8 2 R4 R12 R5 TR3 R14 R15 TR12 TR6 TR13 R10 TR16 D1 R9 R7 R2 R14 9 SUB 13 1-38 5 12 7 6 10 11 Digitized in Heiloo Netherlands 14 15 www.freeservicemanuals.info 3/29/2018 HX-Z1R STK402-010 (IC701) : 2ch AF power amp. 1.Pin layout 1 ~ 18 2.Block diagra 13 18 17 TR41 1 R41 Comparator TR1 R13 R3 D2 D12 TR12 TR2 14 TR3 TR8 R4 TR4 C11 R11 TR14 TR13 R14 2 7 D51 SUB 5 R5 15 D43 C12 TR18 TR20 TR10 3 D41 TR19 TR9 C2 D42 TR16 TR6 R1 C1 TR11 R15 D53 16 R6 R2 D52 R16 TR15 TR5 D1 TR17 R17 TR7 R7 R12 TR51 4 Comparator R51 6 12 9 8 11 10 Digitized in Heiloo Netherlands 1-39 www.freeservicemanuals.info 3/29/2018 HX-Z1R UPD784975AGF303 (IC810) : Main micon 1. Pin layout 100 ~ 81 1 80 ~ ~ 30 51 31 ~ 50 2. Pin function I/O Pin NO. Name 1 AVDD 2 I SPIDTI 3 I MSI 4 I MPX 5 I H/P 6 I KEY1 7 I KEY2 8 I KEY3 9 I VOL10 I VOL+ 11 I SLCPLAY 12 I SLCKEY 13 I PHOTO A 14 AVSS 15 VSS1 16 I X1 17 X2 18 VDD1 19 IC(VPP) 20 VC3RESET I/O 21 I/O MSTAT 22 KCMND I/O 23 RDS DATA I/O 24 RDS CK INT 25 BUZZER I/O 26 INT REMIN 27 I/O SMUTE 28 I/O SLCCE 29 I/O CK 30 DATA OUT I/O 31 DATA IN I/O 32 I/O SM33 I/O SM+ 34 I/O ECHO1 35 I/O ECHO2 1-40 Pin NO. Function Name 36 AD VDD, same as VDD1 SPI A 37 SPI analog input SPI B 38 Music scan input SPI C 39 Tuner stereo indicator PBMUTE 40 VSS0 SW vol IC btw bi-amp & dyn & off relay 41 VDD0 Key 1 input 42 Key 2 input RESET 43 INH Key 3 input 44 LATCH Volume decrease 45 VOLCK Volume increase 46 VOLDA SLC detect play 47 RELAY SLC key input 48 POUT SLC photo A 49 ECON AD VDD, same as VSS1 50 GND PRT 51 AUXMUTE Oscillation 52 TUCE Oscillation 53 54 Connect to VSS1 55 EXTDA VC3 reset 56 EXTCK VC3 status input 57 EXTCE VC3 KCMND(serial data) 58 OEEXT RDS data 59 VOLLED RDS clock 60 FSEARCH Buzzer on 61 RSEARCH Remocon input 62~78 S21~S5 System mute 79 VDD2 SLC chip enable 80 VLOAD SLC / tuner clock 81~84 S4~S1 SLC / tuner data out 85~100 G16~G1 Tuner data in Soundmode reverse Soundmode forward Echo 1 data Echo 2 data Digitized in Heiloo Netherlands I/O Function I/O SPI A data I/O SPI B data I/O SPI C data I/O Playback mute I Micom reset I/O Back-up mode detect I/O Latch for vol IC I/O Volume clock I/O Volume data I/O Relay out I/O Power on I/O Ecology mode I/O Protector in O Auxmute O Tuner chip enable O Available pin O Available pin O External IC data O External IC clock O External IC strobe O Output enable for external IC I/O Volume led I/O Forward skip I/O Reverse skip I/O FL segment I/O I/O Negative power supply(-30V) I/O FL segment I/O FL display grid www.freeservicemanuals.info 3/29/2018 HX-Z1R KIA7809API (IC305) : Regulator 1.Pin layout 1.INPUT 2.COMMON 3.OUTPUT 1 2 3 R1 1 INPUT 3 OUTPUT 2 COMMON (GND) R23 R17 R22 2.Block diagram Q11-1 Q11 Q15 R16 Q6 Q1 R9 R7 R2 C1 Q10 Q7 R3 Q13 R21 Q2 Q4 Q9 Q8 R8 R6 Q5 R5 R4 Q3 R13 Z1 R11 R18 Q18 R14 R20 R12 R19 Q17 R10 Q19 Q14 R15 Q16 Q12 Digitized in Heiloo Netherlands 1-41 www.freeservicemanuals.info 3/29/2018 HX-Z1R HX-Z1R VICTOR COMPANY OF JAPAN, LIMITED AUDIO & COMUNICATION BUSINESS DIVISION PERSONAL & MOBILE NETWORK BUSINESS UNIT. 10-1,1chome,Ohwatari-machi,Maebashi-city,371-8543,Japan 1-42 (No.21114) Digitized in Heiloo Netherlands Printed in Japan 200207 www.freeservicemanuals.info 3/29/2018 HX-Z1R PARTS LIST [ HX-Z1R ] * All printed circuit boards and its assemblies are not available as service parts. HX-Z1R Area suffix B ------------------------------- U.K. E ----------- Continental Europe EN ------------ Northern Europe EV -------------- Eastern Europe - Contents Exploded view of general assembly and parts list (Block No.M1) Speaker assembly and parts list (Block No.M2) CD changer mechanism assembly and parts list (Block No.MA) Cassette mechanism assembly and parts list (Block No.MP) Electrical parts list (Block No.01~08) Packing materials and accessories parts list (Block No.M3~M6) Digitized in Heiloo Netherlands 3- 3 3- 6 3- 8 3-10 3-12 3-24 3-1 www.freeservicemanuals.info HX-Z1R 3/29/2018 < MEMO > 3-2 Digitized in Heiloo Netherlands www.freeservicemanuals.info 3/29/2018 HX-Z1R Exploded view of general assembly and parts list Block No. M 1 M M 51 87 87 85 77 73 50 B P B 72 52 5 49 P 78 77 46 p 78 78 73 84 76 53 75 82 48 87 81 98 82 49 47 75 48 p q 54 86 87 90 FL board 89 20 55 E F J2 111 G 26 28 11 a Switch board 93 93 e 107 c 43 42 g 66 45 108 45 38 Main board h 110 Headphone board E 30 F g r 114 67 M m 104 39 117 f 44 70 69 K n 116 b 44 L 115 i j 40 e 35 d 97 16 D o 68 61 62 Power amplifier board m 4 6 63 41 18 18 5 L 17 18 13 7 36 f 64 3 11 60 24 18 Tuner board 106 I j n 22 43 C 62 25 1 92 94 24 18 O 95 2 23 r 99 91 c 12 9 10 J2 20 112 o Q K k Speaker board N d 105 i 100 22 74 I 22 b 14 h 109 20 119 27 29 21 55 118 8 3 55 J1 31 D 86 20 a O k 20 G C 80 J1 20 19 A 97 88 15 83 CD servo board 20 32 79 N 102 Q 81 96 101 q 56 4 113 65 A 65 103 H 33 1 M 34 59 2 37 H 59 58 71 71 A B C Digitized inDHeiloo Netherlands E F G 3-3 www.freeservicemanuals.info 3/29/2018 HX-Z1R Parts list (General assembly) A Item Parts number HX-Z1R Parts list (General assembly) Block No. M1MM Parts name Description Q'ty Area A Item Parts number Block No. M1MM Parts name Description Q'ty 1 GV10115-003A FRONT PANEL 1 49 LV42763-002A INSULATOR 2 2 GV40313-001A FELT SPACER 2 50 VKS3703-00R CLAMPER ASSY 1 3 GV40077-002A JVC BADGE 1 51 QYSPST2606Z SCREW 1 4 GV30293-002A FUNCTION LENS A 1 52 VKW5187-001 ROD 1 5 GV30294-002A FUNCTION LENS B 1 53 QUQ610-1609AJ FLAT WIRE 1 6 GV30295-002A FUNCTION LENS C 1 54 VDM1001-M002AV WIRE & TUBE 1 7 GV30296-001A FL LENS 1 55 QYSBSF2608Z T.SCREW 4 8 GV10114-003A WINDOW FRAME 1 56 VYSA1R2-033 SPACER 1 FOR VDM1001-M00 Area 9 QYSDSF2608Z SCREW 2 W.FRAME/F.PNL 58 GV10111-001A CHASSIS BASE 1 10 GV20171-003A WINDOW SCREEN 1 59 GV40313-002A FELT SPACCER 2 CHASS BASE FOOT 11 LV40744-001A SOCKET BOLT 4 W.SCREEN/F.PNL 60 GV30279-002A HEAT SINK 1 12 GV30309-003A POWER BUTTON ASSY 1 61 GV30281-001A BASE BRACKET 1 13 GV30288-001A CD EJECT BUTTON 1 62 QYSBSG3014E T.SCREW 4 FOR POWER IC 14 GV30290-002A CD BUTTON 1 63 GV40297-001A LEAF SPRING 1 15 GV30289-002A FUNCTION BUTTON 1 64 QYSBSG3014E T.SCREW 1 FOR LEAF SPRING 16 GV20169-001A CONTROL BUTTON 1 65 QYSDSTL4008Z SPECIAL SCREW 4 FOR TRANS/CH.BS 17 QYSDSF2608Z SCREW 1 W.FRAME GROUND 66 QYSBSFG3016Z SCREW 1 PRI.BRD/CH.BASE 18 QYSDSF2608Z SCREW 8 PWB BRD./F.PANE 67 QYSBSGG3008E T.SCREW 1 FMC BRD./CH.BS 19 QYSDSF2608Z SCREW 1 REMOTE BRD./F.P 68 QYSBSG3014E T.SCREW 2 BASE BRKT/H.SIN 20 QYSDSF2608Z SCREW 9 MICOM PWB/F.PNL 69 QYSBSG3008E T.SCREW 2 CH.BS./BS.BRKT. 21 GV30082-002A STAY BRACKET 1 70 QZW0033-001 STRAIN RELIEF 1 22 QYSDSF2608Z SCREW 4 STY.BRKT.+F.PNL 71 QYSBSGY3008E SPECIAL SCREW 3 F.PANEL/CH. BAS 23 GV30301-001A SUPPORT BRACKET 1 72 GV10112-005A REAR PANEL 1 B,E,EN 24 QYSDSF2608Z SCREW 4 SPT.BRKT.+F.PNL GV10112-006A REAR PANEL 1 EV 25 QYSDSF2608Z SCREW 1 SPT.BRKT + WIN. 73 QYSBSG3010Z T.SCREW 2 C3 MECHA/S.BRKT 26 GV30303-001A PRESET RING 1 74 GV30278-001A FAN BARCKET 1 27 GV30302-001A SOUND MODE RING 1 75 QYSBSGY3008E SPECIAL SCREW 2 R.PANEL/FAN.BRK 28 QYSDSF2608Z SCREW 1 PRE.RING/F.PANE 76 GV30277-001A REAR BRACKET 1 29 QYSDSF2608Z SCREW 1 S.M.RING/F.PANE 77 QYSBSG3010Z T.SCREW 2 R.BRKT./CD MECH 30 E65923-003 TAPPING SCREW 1 PHONE BRD./F.PN 78 QYSBSGY3008E SPECIAL SCREW 3 R.BRKT./R.PANEL 31 GV40342-001A FL SHEET 2 79 QYSBSGY3008E SPECIAL SCREW 1 REAR PNL/CHAS.B 32 GV40343-001A VINYL TUBE 1 80 QYSBSGY3008E SPECIAL SCREW 1 REAR PNL/ AUX 33 GV30315-001A CASS.HOLD.ASSY 1 81 QYSBSGY3008E SPECIAL SCREW 2 SPK/ REAR PANEL 34 GV30311-001A EJECT SYS.ASSY 1 82 QYSBSGY3008E SPECIAL SCREW 2 TUNER/REAR PANE 35 GV40034-001A DAMPER ASSY 1 83 QYSBSGY3008E SPECIAL SCREW 1 OPTICAL/R.PANEL 36 VKY4180-401 CASSETTE SPRING 2 84 QYSBSGY3008E SPECIAL SCREW 1 INNER BAR/R.PNL 37 GV40317-001A HOLDER SPRING 1 85 GV10110-001A/S/ METAL COVER 1 38 --------------- CASSETTE MECHA 1 86 QYSDSG3006M T.SCREW 2 M.COVER/C.BASE 39 VKL7850-002 EJECT SAFTY(A) 1 87 QYSBSGY3008E SPECIAL SCREW 6 M.COVER/R.PANEL 40 VKW5258-003 TORSION SPRING 1 EJECT SAFETY(A) 88 GV20166-001A CD FITTING 1 1 DISC 1 41 GV30124-001A TRANS SHIELD 1 89 GV20167-001A CD FITTING 2 1 DISC 2 42 GV40170-003A SPACER 1 STICK AT SLC(M) 90 GV20168-001A CD FITTING 3 1 DISC 3 43 QYSBSF3012Z SCREW 2 MECHA/F.PANEL 91 GV30299-001A SD. MODE KNOB 2 44 QYSBSF3010Z SCREW 2 E.ARM BKT./F.PL 92 GV30297-002A VOLUME LENS 1 45 QYSBSG3010Z T.SCREW 2 MECHA/E.ARM BKT 93 QYSDSF2608Z SCREW 2 VOL.LEN/F.PANEL 46 --------------- CD CHANGER MECHA 1 94 GV30262-002A VOLUME ORNAMENT 1 47 KSM-213CCMJ CD MECHA ASSY 1 95 GV30298-001A VOLUME KNOB 1 48 LV42763-001A INSULATOR 2 96 GV30286-001A INNER BAR 1 Digitized in Heiloo Netherlands 3-4 www.freeservicemanuals.info 3/29/2018 HX-Z1R Parts list (General assembly) A A A A A A A A Item Block No. M1MM Parts number Parts name Description Q'ty Area 97 GV40121-004A SPACER 3 STICK AT I.BAR 98 LV30225-079A SPACER 1 STICK AT I.BAR 99 GV40186-001A NUT 1 AT VOL.KNOB 100 QYSBSGG3008E T.SCREW 1 INNER BAR/FMH B 101 E310243-002 PLASTIC RIVET 1 SUPP.BRKT./INNE 102 E310243-002 PLASTIC RIVET 2 HOLD.BRD./FMH B 103 QQT0367-002 POWER TRANSF 1 T001 104 QMPN150-200-JC POWER CORD 1 B QMPK200-200-JD POWER CORD 1 E,EN,EV 105 QAR0228-001 FAN MOTOR 1 106 QUQH12-1307BJ FLAT WIRE 1 FC1 107 QUQH12-0908BJ FLAT WIRE 1 FC33 108 QUQH12-1023BJ FLAT WIRE 1 FC34 109 QUQH10-1918AJ FLAT WIRE 1 FC651 110 QUQH12-2320BJ FLAT WIRE 1 FC860 111 QUQH12-1309BJ FLAT WIRE 1 FC880 112 GV40361-001A TUNER COVER 1 113 QYSBSG3008E T.SCREW 1 WIRE / I.BAR 114 QMF51W2-2R5-J8 FUSE 1 F001 115 QMF51W2-5R0-J8 FUSE 1 F101 116 QMF51W2-5R0-J8 FUSE 1 F102 117 QMF51W2-2R0-J8 FUSE 1 F103 118 GV30280-001A FL HOLDER 1 119 E3400-439 FELT SPACER 2 AT FL HOLDER Digitized in Heiloo Netherlands 3-5 www.freeservicemanuals.info HX-Z1R 3/29/2018 Speaker assembly and parts list Block No. M 2 M M A 1 4 9 12 11 15 6 12 16 3 13 12 7 14 5 13 15 12 11 12 B 2 4 10 11 12 15 6 12 16 3 13 8 14 5 12 13 15 12 11 12 3-6 Digitized in Heiloo Netherlands www.freeservicemanuals.info 3/29/2018 HX-Z1R Parts list (Speaker assembly) A Item Parts number Block No. M2MM Parts name Description Q'ty A HXZ1R-SPBOX-L SP BOX ASSY(L) 1 B HXZ1R-SPBOX-R SP BOX ASSY(R) 1 1 --------------- CABINET ASSY(L) 1 2 --------------- CABINET ASSY(R) 1 3 993060500030 5CM TWEETER 2 4 991091000047 10CM WOOFER 2 FOR TOP SIDE 5 991081000048 10CM WOOFER 2 FOR BOTTOM SIDE 6 991061650046 16CM SUBWOOFER 2 7 199734300149 FRONT PANEL(L) 1 8 199734300150 FRONT PANEL(R) 1 9 151733601104 SIDE PANEL(L) 1 10 151733601105 SIDE PANEL(R) 1 11 135604161053 SCREW(M4X16) 8 FOR FRONT PANEL 12 135604201054 SCREW(M4X20) 16 FOR SIDE PANEL 13 135604201046 SCREW(M4X20) 8 FOR SUBWOOFER 14 135604121055 SCREW(M4X12) 4 FOR TWEETER 15 135604161047 SCREW(M4X16) 16 FOR WOOFER 16 109760511072 FOAM GASKET 2 Digitized in Heiloo Netherlands Area 3-7 www.freeservicemanuals.info HX-Z1R 3/29/2018 CD changer mechanism assembly and parts list Block No. M A M M 29 Grease = EM-30L = EBS0006-009B = FL-7750E 30 40 41 36 39 31 37 51 50 FIG B 32 49 51 42 33 34 42 35 48 28 A 42 38 FIG C 16 7 FIG C FIG B Opposite side the same. 24 14 B C 25 17 20 4 5 12 6 D E 45 43 19 22 5 11 6 3 27 10 H 4 23 21 6 8 13 26 27 18 3 FIG A 9 46 B CH 1 44 A 2 2 47 E FIG A 47 15 D 52 15 47 CAUTION The axes of each gear to apply grease:Half face 3-8 Digitized in Heiloo Netherlands www.freeservicemanuals.info 3/29/2018 HX-Z1R Parts list (CD changer mechanism) A Item Parts number Parts name Block No. MAMM Description Q'ty 1 VKS1144-004 CHASSIS 1 2 VKS3698-003 TRAY GUIDE 2 3 VKS5532-003 PULLEY GEAR 2 4 VKB3000-164 BELT 2 5 VKS5505-003 GEAR B 2 6 VKS5506-002 GEAR C 3 7 VKS5507-002 CROSS GEAR U 1 8 VKS5508-002 CROSS GEAR L 1 9 VKS5510-003 SELECT LEVER 1 10 VKH5769-001 S.G.SHAFT 1 11 VKS5511-002 SELECT GEAR 1 12 VKW5155-003 COMP.SPRING 1 FOR SELECT GEAR 13 VKM3846-003 GEAR BRACKET 1 14 VKS5509-002MM CYLINDER GEAR 1 15 MSN5D257A-SA2 DC MOTOR ASSY 2 16 QYSPSPD2616Z SCREW 2 FOR MOTOR 17 LV40612-001A COMP.SPRING 1 18 VKM3825-00B C.G.BASE ASS'Y 1 19 VKZ3172-00ASS CAM SW. R ASS'Y 1 20 VKZ3173-00ASS CAM SW. L ASS'Y 1 21 QYSPST2606Z SCREW 3 FOR CAM SW. 22 VKS2263-002MM CAM R1 1 23 VKS2264-002MM CAM R2 1 24 VKS2265-002MM CAM GEAR L 1 25 WDL316050MM SLIT WASHER 1 FOR CAM GEAR L 26 WDL316050MM SLIT WASHER 1 27 QYSBSF2608Z T.SCREW 4 FOR C.GEAR BASE 28 VKS3702-00FMM DRIVE UNIT 1 29 VKS2247-005 MECHA HOLDER A 1 30 VKL7767-00F BRACKET ASS'Y 1 31 QYSBSF2606Z SCREW 2 FOR BRACKET 32 VKM3860-00E M.HOLDER B AS'Y 1 33 VKL7802-00D M.HOLDER C AS'Y 1 34 QYSDST2604Z SCREW 2 FOR M.HOLDER C 35 VKL7810-00B LIFTER ASS'Y R 1 36 VKL7811-00B LIFTER ASS'Y L 1 37 VKL7812-00B LIFTER ASS'Y H 1 38 VKL2745-003 LIFTER BASE 1 39 VKM3857-002 LIFTER BRACKET 1 40 QYSDST2604Z SCREW 1 41 WDL266035-2 SLIT WASHER 1 42 QYSBSF2608Z T.SCREW 4 43 VKS5514-002MM LOCK LEVER 3 44 VKY3133-002MM RETURN SPRING 1 45 QYSBSF2608Z T.SCREW 1 FOR RETURN SP. 46 VKY3134-003MM CLICK SPRING 1 47 VKS2252-00N TRAY ASS'Y 3 48 VKS2250-004 TOP BRACKET 1 49 VKS5515-002 S.TRAY STOPPER 1 50 VKW5156-004 TORSION SPRING 1 51 QYSBSF2608Z T.SCREW 3 52 QYSBSF2608Z T.SCREW 2 Digitized in Heiloo Netherlands Area 3-9 www.freeservicemanuals.info HX-Z1R 3/29/2018 Cassette mechanism assembly and parts list Block No. M P M M SLC-S101M Grease =EM-30L =UD-24 =UD-24H2 =LEN-320M =JC-888B =MOBIL-1 8 15 2 2 14 10 9 3 34 13 16 3 12 6 23 4 5 11 27 7 1 29 A 1 24 B Switch board 5 19 6 30 25 22 18 11 20 21 17 31 28 26 A 33 B 0.1 _ 0.15 mm 8.7 + 33 32 Head amplifier board 32 35 3-10 The lower side 35 Digitized in Heiloo Netherlands www.freeservicemanuals.info 3/29/2018 HX-Z1R Parts list (Cassette mechanism) A Item Block No. MPMM Parts number Parts name Description Q'ty 1 VKS1165-00J CHASSIS B.ASS'Y 1 2 VKS2274-002 REEL GEAR 2 3 VKW5286-002 B.T. SPRING 2 4 VKS5559-001 PLAY IDLE GEAR 1 5 VKS5595-002 BLIND 1 6 VKS5560-003 FR IDLE GEAR 1 7 LV42013-001A EARTH SPRING 1 8 SLC-RP3SVM HEAD MOUNT 1 9 VKY3149-002 CASSETTE SP. 1 10 LV31786-001A PLAY SW LEVER 1 11 VKS1166-004 CONTROL CAM 1 12 VKW5279-002 HEAD BASE SP(R) 1 13 VKW5280-001 HEAD BASE SP(L) 1 14 LV41584-001A BRAKE(R) 1 15 LV41585-002A BRAKE(L) 1 16 QYSBSF2005Z T.SCREW 1 17 VKS5603-00G MAIN PULLEY ASY 1 18 VKS3785-001MM FR ARM 1 19 VKW5284-002 SWING SPRING 1 20 VKS2278-003 TRIGGER ARM 1 21 VKW5301-001 FR SPRING 1 22 VKW5266-001 ELEVATOR SPRING 1 23 WDL214025 WASHER 1 24 QYSBSF2005Z T.SCREW 1 25 VKS3786-00G CLUTCH ASS'Y 1 26 VKF3205-00B F.WHEEL ASSY(R) 1 27 WDL183425 SLIT WASHER 1 28 VKF3207-00B F.WHEEL ASSY(L) 1 29 WDL173525-6 SLIT WASHER 1 30 VKZ3174-00A DC SOLENOID 1 31 LV42836-001A CAPSTAN BELT 1 32 MSI-5U2LWA D.C.MOTOR ASS'Y 1 33 VKR4761-001 MOTOR PULLEY 1 34 QYSPSP2604Z SCREW 2 35 QYSBSF2608Z T.SCREW 3 FOR P.W.B. Digitized in Heiloo Netherlands Area 3-11 www.freeservicemanuals.info HX-Z1R 3/29/2018 Electrical parts list (Power amplifier board) A Item C 250 A A A A A A A A A A A A A A 3-12 Parts number Parts name Block No. 01 Remarks Area A Item A FT532 A IC303 A IC305 A IC360 A IC701 Parts number Remarks Parts name QNG0003-001Z FUSE CLIP KIA7808API IC KIA7809API IC KIA7805API IC QETN1HM-476Z E CAPACITOR 47MF 20% 50V C 251 QETN1CM-477Z E CAPACITOR 470MF 20% 16V C 252 QCZ9105-472 C CAPACITOR 4700PF C 253 QFLM1HJ-472Z M CAPACITOR 4700PF 5% 50V C 255 QETN0JM-477Z E CAPACITOR 470MF 20% 6.3V C 308 QEKC1HM-106Z E CAPACITOR 10MF 20% 50V L 701 C 311 QETN1HM-106Z E CAPACITOR 10MF 20% 50V L 702 QQLZ035-R39 INDUCTOR C 312 QETN1HM-106Z E CAPACITOR 10MF 20% 50V Q 250 2SC2785/FE/-T TRANSISTOR C 362 QETN1HM-106Z E CAPACITOR 10MF 20% 50V Q 251 KTC1027/OY/-T TRANSISTOR C 703 QCBB1HK-471Y C CAPACITOR 470PF 10% 50V Q 701 KTA1268/GL/-T TRANSISTOR C 705 QCBB1HK-221Y C CAPACITOR 220PF 10% 50V Q 702 KTA1268/GL/-T TRANSISTOR C 706 QCBB1HK-221Y C CAPACITOR 220PF 10% 50V Q 710 KTA1023/OY/-T TRANSISTOR C 707 QETN1JM-476Z E CAPACITOR 47MF 20% 63V Q 711 KTC3200/GL/-T TRANSISTOR C 708 QETN1JM-476Z E CAPACITOR 47MF 20% 63V Q 712 KTA1268/GL/-T TRANSISTOR C 709 QCSB1HK-4R7Y C CAPACITOR 4.7PF 10% 50V Q 713 KTC1027/OY/-T TRANSISTOR C 710 QCSB1HK-4R7Y C CAPACITOR 4.7PF 10% 50V Q 726 KTC3200/GL/-T TRANSISTOR C 711 QFZ0212-104Z MM CAPACITOR .10MF Q 727 KTA1268/GL/-T TRANSISTOR C 712 QFZ0212-104Z MM CAPACITOR .10MF Q 728 2SC2785/FE/-T TRANSISTOR C 713 QFLM1HJ-473Z M CAPACITOR .047MF 5% 50V R 250 QRE141J-332Y C RESISTOR 3.3K 5% 1/4W C 714 QFLM1HJ-473Z M CAPACITOR .047MF 5% 50V R 253 QRE141J-332Y C RESISTOR 3.3K 5% 1/4W C 715 QFLM1HJ-473Z M CAPACITOR .047MF 5% 50V R 362 QRE141J-102Y C RESISTOR 1.0K 5% 1/4W C 716 QFLM1HJ-473Z M CAPACITOR .047MF 5% 50V R 701 QRJ146J-470X UNF C RESISTOR 47 5% 1/4W C 721 QETN1CM-476Z E CAPACITOR 47MF 20% 16V R 702 QRJ146J-470X UNF C RESISTOR 47 5% 1/4W C 722 QETN1CM-476Z E CAPACITOR 47MF 20% 16V R 703 QRE141J-563Y C RESISTOR 56K 5% 1/4W C 723 QETN1AM-107Z E CAPACITOR 100MF 20% 10V R 704 QRE141J-563Y C RESISTOR 56K 5% 1/4W C 726 QETN1EM-106Z E CAPACITOR 10MF 20% 25V R 705 FQRJ143J-821X UNF C RESISTOR C 729 QETN1CM-476Z E CAPACITOR 47MF 20% 16V R 706 FQRJ143J-821X UNF C RESISTOR C 730 FQCF31HZ-223Z D CAPACITOR R 707 QRE141J-563Y C RESISTOR 56K 5% 1/4W C 731 FQCF31HZ-223Z D CAPACITOR R 708 QRE141J-563Y C RESISTOR 56K 5% 1/4W C 739 QETN1HM-105Z E CAPACITOR R 713 QRJ146J-100X UNF C RESISTOR 10 5% 1/4W CN212 QGD2504C1-03Z SOCKET R 714 QRJ146J-100X UNF C RESISTOR 10 5% 1/4W CN213 QGD2504C1-04Z SOCKET R 715 FQRJ143J-100X UNF C RESISTOR CN214 QGA3901C1-05 CONNECTOR R 716 FQRJ143J-100X UNF C RESISTOR CN215 QGB2510K2-15 CONNECTOR R 717 QRE141J-102Y C RESISTOR 1.0K 5% 1/4W CN231 QGD2504C1-03Z SOCKET R 718 QRE141J-102Y C RESISTOR 1.0K 5% 1/4W CN232 QGD2504C1-03Z SOCKET R 719 QRE141J-562Y C RESISTOR 5.6K 5% 1/4W CN250 QGA7901F2-02 CONNECTOR R 720 QRE141J-562Y C RESISTOR 5.6K 5% 1/4W CN301 QGB2510K2-11 CONNECTOR R 721 QRE141J-103Y C RESISTOR 10K 5% 1/4W D 233 2A02-M DIODE R 722 QRE141J-103Y C RESISTOR 10K 5% 1/4W D 234 2A02-M DIODE R 723 QRE141J-682Y C RESISTOR 6.8K 5% 1/4W D 235 2A02-M DIODE R 724 QRE141J-682Y C RESISTOR 6.8K 5% 1/4W D 236 2A02-M DIODE R 727 QRE141J-104Y C RESISTOR 100K 5% 1/4W D 252 1N4003S-T5 SI DIODE R 728 QRE141J-103Y C RESISTOR 10K 5% 1/4W D 254 1SS119-041-T2 SI DIODE R 729 QRE141J-104Y C RESISTOR 100K 5% 1/4W D 256 DZ6.2BSC-T2 ZENER DIODE R 730 QRE141J-103Y C RESISTOR 10K 5% 1/4W D 313 DZ10BSC-T2 ZENER DIODE R 739 QRE141J-823Y C RESISTOR 82K 5% 1/4W D 315 DZ11BSC-T2 ZENER DIODE R 740 QRE141J-104Y C RESISTOR 100K 5% 1/4W D 360 1SS119-041-T2 SI DIODE R 741 QRE141J-682Y C RESISTOR 6.8K 5% 1/4W D 362 DZ8.2BSC-T2 ZENER DIODE R 742 QRE141J-682Y C RESISTOR 6.8K 5% 1/4W D 703 DZ15BSC-T2 ZENER DIODE R 753 QRZ0197-R22 C RESISTOR 1W D 704 DZ15BSC-T2 ZENER DIODE R 754 QRZ0197-R22 C RESISTOR 1W D 719 1SS119-041-T2 SI DIODE R 761 QRE141J-102Y C RESISTOR 1.0K 5% 1/4W D 720 1SS119-041-T2 SI DIODE R 762 QRE141J-102Y C RESISTOR 1.0K 5% 1/4W D 723 DZ36BSA-T2 ZENER DIODE R 766 QRE141J-333Y C RESISTOR 33K 5% 1/4W D 724 DZ36BSA-T2 ZENER DIODE R 768 QRE141J-104Y C RESISTOR 100K 5% 1/4W D 726 1SS119-041-T2 SI DIODE R 769 QRE141J-222Y C RESISTOR 2.2K 5% 1/4W D 728 1SS119-041-T2 SI DIODE R 774 QRJ146J-100X UNF C RESISTOR 10 5% 1/4W FT111 QNG0003-001Z FUSE CLIP R 775 QRE141J-102Y C RESISTOR 1.0K 5% 1/4W FT112 QNG0003-001Z FUSE CLIP R 777 QRE141J-103Y C RESISTOR 10K 5% 1/4W FT511 QNG0003-001Z FUSE CLIP R 778 QRE141J-103Y C RESISTOR 10K 5% 1/4W FT512 QNG0003-001Z FUSE CLIP R 786 QRE141J-103Y C RESISTOR 10K 5% 1/4W FT521 QNG0003-001Z FUSE CLIP R 787 QRE141J-103Y C RESISTOR 10K 5% 1/4W FT522 QNG0003-001Z FUSE CLIP RY 3 QSK0140-001 RELAY FT531 QNG0003-001Z FUSE CLIP T 002 QQT0253-002 POWER TRANS 1.0MF 20% 50V A A A A A A A A A A A A A STK412-010 IC(HYBRID) QQLZ035-R39 INDUCTOR Digitized in Heiloo Netherlands Area www.freeservicemanuals.info 3/29/2018 HX-Z1R Electrical parts list (Main board) A Item C 401 Parts number QCBB1HK-221Y Parts name Block No. 02 Remarks Area A Item Parts number Parts name Remarks C CAPACITOR 220PF 10% 50V C 501 QETN1HM-475Z E CAPACITOR 4.7MF 20% 50V 220PF 10% 50V C 502 QFLM1HJ-153Z M CAPACITOR .015MF 5% 50V C 503 QFVJ1HJ-224Z MF CAPACITOR .22MF 5% 50V C 402 QCBB1HK-221Y C CAPACITOR C 403 FQCF31HP-103Z C CAPACITOR C 404 QETN1CM-476Z E CAPACITOR 47MF 20% 16V C 504 QFLM1HJ-822Z M CAPACITOR 8200PF 5% 50V C 407 QFLM1HJ-223Z M CAPACITOR .022MF 5% 50V C 505 QFVJ1HJ-274Z MF CAPACITOR .27MF 5% 50V C 408 FQCF31HP-103Z C CAPACITOR C 508 QFLM1HJ-273Z M CAPACITOR .027MF 5% 50V C 409 QETN0JM-107Z E CAPACITOR 100MF 20% 6.3V C 509 QEKC1HM-475Z E CAPACITOR 4.7MF 20% 50V C 411 QCBB1HK-221Y C CAPACITOR 220PF 10% 50V C 510 QEKC1AM-107Z E CAPACITOR 100MF 20% 10V C 412 QCBB1HK-221Y C CAPACITOR 220PF 10% 50V C 514 QFLC1HJ-471Z M CAPACITOR 470PF 5% 50V C 415 QDXB1CM-222Y C CAPACITOR C 533 QETN1AM-107Z E CAPACITOR 100MF 20% 10V C 426 QDVB1EZ-223Y C CAPACITOR C 534 QFLM1HJ-153Z M CAPACITOR .015MF 5% 50V C 427 QETN1EM-106Z E CAPACITOR 10MF 20% 25V C 536 QETN1HM-105Z E CAPACITOR 1.0MF 20% 50V C 435 QETN1EM-106Z E CAPACITOR 10MF 20% 25V C 537 QDGB1HK-681Y C CAPACITOR C 436 QETN1EM-106Z E CAPACITOR 10MF 20% 25V C 538 QDXB1CM-182Y C CAPACITOR C 437 QFLM1HJ-104Z M CAPACITOR .10MF 5% 50V C 539 QCSB1HJ-330Y C CAPACITOR 33PF 5% 50V C 438 QFLM1HJ-473Z M CAPACITOR .047MF 5% 50V C 551 QETN1AM-227Z E CAPACITOR 220MF 20% 10V C 442 QETN1EM-106Z E CAPACITOR 10MF 20% 25V C 552 QFLM1HJ-104Z M CAPACITOR .10MF 5% 50V C 444 QETN1EM-106Z E CAPACITOR 10MF 20% 25V C 553 QFLM1HJ-103Z M CAPACITOR .010MF 5% 50V C 445 QFLM1HJ-104Z M CAPACITOR .10MF 5% 50V C 554 QETN1EM-106Z E CAPACITOR 10MF 20% 25V C 446 QFLM1HJ-472Z M CAPACITOR 4700PF 5% 50V C 555 QFLM1HJ-103Z M CAPACITOR .010MF 5% 50V C 447 QFVJ1HJ-224Z MF CAPACITOR .22MF 5% 50V C 556 QETN1EM-106Z E CAPACITOR 10MF 20% 25V C 448 QFVJ1HJ-224Z MF CAPACITOR .22MF 5% 50V C 557 QFLM1HJ-104Z M CAPACITOR .10MF 5% 50V C 449 QFVJ1HJ-224Z MF CAPACITOR .22MF 5% 50V C 558 FQCF31HP-103Z C CAPACITOR C 450 QFVJ1HJ-224Z MF CAPACITOR .22MF 5% 50V C 559 FQCF31HP-103Z C CAPACITOR C 451 QFLM1HJ-104Z M CAPACITOR .10MF 5% 50V C 560 QFLM1HJ-223Z M CAPACITOR C 452 QFLM1HJ-104Z M CAPACITOR .10MF 5% 50V C 563 QDYB1CM-103Y C CAPACITOR C 453 QFLM1HJ-104Z M CAPACITOR .10MF 5% 50V C 564 QDYB1CM-103Y C CAPACITOR C 454 QFLM1HJ-104Z M CAPACITOR .10MF 5% 50V C 570 QETN1JM-476Z E CAPACITOR 47MF 20% 63V C 455 QFLM1HJ-223Z M CAPACITOR .022MF 5% 50V C 571 QETN1HM-225Z E CAPACITOR 2.2MF 20% 50V C 456 QFLM1HJ-223Z M CAPACITOR .022MF 5% 50V C 575 QCBB1HK-101Y C CAPACITOR 100PF 10% 50V C 457 QFLM1HJ-223Z M CAPACITOR .022MF 5% 50V C 576 QETN1CM-476Z E CAPACITOR 47MF 20% 16V C 458 QFLM1HJ-223Z M CAPACITOR .022MF 5% 50V C 577 QETN1CM-476Z E CAPACITOR 47MF 20% 16V C 459 QFLM1HJ-103Z M CAPACITOR .010MF 5% 50V C 578 QETN1HM-105Z E CAPACITOR 1.0MF 20% 50V C 460 QFLM1HJ-103Z M CAPACITOR .010MF 5% 50V C 585 QETN1HM-476Z E CAPACITOR 47MF 20% 50V C 461 QFLM1HJ-103Z M CAPACITOR .010MF 5% 50V C 587 QETN1CM-107Z E CAPACITOR 100MF 20% 16V C 462 QFLM1HJ-103Z M CAPACITOR .010MF 5% 50V C 588 QETN1AM-227Z E CAPACITOR 220MF 20% 10V C 463 QFG32AJ-222Z PP CAPACITOR 2200PF 5% 100V C 590 QDGB1HK-102Y C CAPACITOR C 464 QFG32AJ-222Z PP CAPACITOR 2200PF 5% 100V C 591 QDGB1HK-102Y C CAPACITOR C 465 QFG32AJ-223Z PP CAPACITOR .022MF 5% 100V C 595 QDYB1CM-103Y C CAPACITOR C 466 QFG32AJ-223Z PP CAPACITOR .022MF 5% 100V CN 11 QGF1205F1-13 CONNECTOR C 467 QFG32AJ-223Z PP CAPACITOR .022MF 5% 100V CN 44 QGF1201F3-10 CONNECTOR C 468 QFG32AJ-223Z PP CAPACITOR .022MF 5% 100V CN217 QGB2510J1-07 CONNECTOR C 469 QFLM1HJ-104Z M CAPACITOR .10MF 5% 50V CN311 QGB2510J1-11 CONNECTOR C 470 QFLM1HJ-104Z M CAPACITOR .10MF 5% 50V CN661 QGF1036F1-19 FFC/FPC CONNE C 471 QFLM1HJ-104Z M CAPACITOR .10MF 5% 50V CN870 QGF1205F1-23 CONNECTOR C 472 QFLM1HJ-104Z M CAPACITOR .10MF 5% 50V D 409 DZ5.1BSB-T2 ZENER DIODE C 473 QETN1EM-227Z E CAPACITOR 220MF 20% 25V D 411 1SS119-041-T2 SI DIODE SI DIODE C 474 QFVJ1HJ-394Z MF CAPACITOR .39MF 5% 50V D 412 1SS119-041-T2 C 475 QETN1AM-477Z E CAPACITOR 470MF 20% 10V D 426 DZ5.1BSB-T2 ZENER DIODE C 476 QTE1V06-106Z E CAPACITOR D 448 1SS119-041-T2 SI DIODE C 477 QTE1V06-106Z E CAPACITOR D 501 1SS119-041-T2 SI DIODE C 478 QTE1C06-476Z E CAPACITOR D 502 1SS119-041-T2 SI DIODE C 479 QFVJ1HJ-224Z MF CAPACITOR .22MF 5% 50V D 535 1SS119-041-T2 SI DIODE C 480 QETN1HM-106Z E CAPACITOR 10MF 20% 50V D 545 1SS119-041-T2 SI DIODE C 481 QTE1V06-106Z E CAPACITOR D 571 1SS119-041-T2 SI DIODE C 482 QTE1V06-106Z E CAPACITOR D 572 1SS119-041-T2 SI DIODE C 483 QETN1EM-106Z E CAPACITOR 10MF 20% 25V IC434 BH3874AKS2 IC C 484 QETN1EM-106Z E CAPACITOR 10MF 20% 25V IC501 NJM4580D IC C 485 QETN1EM-106Z E CAPACITOR 10MF 20% 25V IC502 NJM4580D IC C 486 QETN1EM-106Z E CAPACITOR 10MF 20% 25V IC571 NJM4580D IC C 487 QETN1HM-225Z E CAPACITOR 2.2MF 20% 50V J 411 QNN0420-001 PIN JACK C 488 QETN1HM-225Z E CAPACITOR 2.2MF 20% 50V J 426 GP1FA550TZ OPT TRANSMITTER C 497 QETN1HM-105Z E CAPACITOR 1.0MF 20% 50V L 533 QQR1277-001Z F.BEADS Digitized in Heiloo Netherlands Area .022MF 5% 50V 3-13 www.freeservicemanuals.info HX-Z1R Electrical parts list (Main board) A 3-14 Item Parts number Parts name 3/29/2018 Block No. 02 Remarks Area A Item Parts number Parts name Remarks L 551 QQR1277-001Z F.BEADS R 511 QRE141J-104Y C RESISTOR 100K 5% 1/4W Q 401 2SC3576-JVC-T TRANSISTOR R 512 QRE141J-563Y C RESISTOR 56K 5% 1/4W Q 402 2SC3576-JVC-T TRANSISTOR R 513 QRE141J-103Y C RESISTOR 10K 5% 1/4W Q 493 2SC3576-JVC-T TRANSISTOR R 514 QRE141J-822Y C RESISTOR 8.2K 5% 1/4W Q 494 2SC3576-JVC-T TRANSISTOR R 515 QRE141J-114Y C RESISTOR 110K 5% 1/4W Q 495 2SC3576-JVC-T TRANSISTOR R 533 QRZ9006-4R7X F RESISTOR 4.7 1/4W Q 496 KRA102M-T D.TRANSISTOR R 534 QRE141J-473Y C RESISTOR 47K 5% 1/4W Q 533 2SC2785/FE/-T TRANSISTOR R 535 QRE141J-225Y C RESISTOR 2.2M 5% 1/4W Q 534 2SC2785/FE/-T TRANSISTOR R 536 QRE141J-104Y C RESISTOR 100K 5% 1/4W Q 545 KRA102M-T D.TRANSISTOR R 537 QRE141J-220Y C RESISTOR 22 5% 1/4W Q 571 2SC2785/FE/-T TRANSISTOR R 538 QRE141J-221Y C RESISTOR 220 5% 1/4W Q 572 2SC2785/FE/-T TRANSISTOR R 545 QRE141J-333Y C RESISTOR 33K 5% 1/4W Q 573 2SC2785/FE/-T TRANSISTOR R 546 QRE141J-221Y C RESISTOR 220 5% 1/4W R 401 QRE141J-102Y C RESISTOR 1.0K 5% 1/4W R 551 QRE141J-472Y C RESISTOR 4.7K 5% 1/4W R 402 QRE141J-102Y C RESISTOR 1.0K 5% 1/4W R 552 QRE141J-472Y C RESISTOR 4.7K 5% 1/4W R 403 QRE141J-472Y C RESISTOR 4.7K 5% 1/4W R 553 QRE141J-113Y C RESISTOR 11K 5% 1/4W R 404 QRE141J-472Y C RESISTOR 4.7K 5% 1/4W R 554 QRE141J-113Y C RESISTOR 11K 5% 1/4W R 405 QRE141J-223Y C RESISTOR 22K 5% 1/4W R 570 QRE141J-822Y C RESISTOR 8.2K 5% 1/4W R 406 QRE141J-223Y C RESISTOR 22K 5% 1/4W R 571 QRE141J-271Y C RESISTOR 270 5% 1/4W R 407 QRE141J-272Y C RESISTOR 2.7K 5% 1/4W R 572 QRE141J-473Y C RESISTOR 47K 5% 1/4W R 411 QRE141J-363Y C RESISTOR 36K 5% 1/4W R 573 QRE141J-113Y C RESISTOR 11K 5% 1/4W R 412 QRE141J-363Y C RESISTOR 36K 5% 1/4W R 575 QRE141J-473Y C RESISTOR 47K 5% 1/4W R 413 QRE141J-123Y C RESISTOR 12K 5% 1/4W R 576 QRE141J-104Y C RESISTOR 100K 5% 1/4W R 414 QRE141J-123Y C RESISTOR 12K 5% 1/4W R 577 QRE141J-104Y C RESISTOR 100K 5% 1/4W R 426 QRE141J-560Y C RESISTOR 56 5% 1/4W R 579 QRE141J-154Y C RESISTOR 150K 5% 1/4W R 435 QRE141J-683Y C RESISTOR 68K 5% 1/4W R 580 QRE141J-682Y C RESISTOR 6.8K 5% 1/4W R 440 QRE141J-912Y C RESISTOR 9.1K 5% 1/4W R 581 QRE141J-224Y C RESISTOR 220K 5% 1/4W R 442 QRE141J-682Y C RESISTOR 6.8K 5% 1/4W R 582 QRE141J-101Y C RESISTOR 100 5% 1/4W R 443 QRE141J-243Y C RESISTOR 24K 5% 1/4W R 583 QRE141J-101Y C RESISTOR 100 5% 1/4W R 444 QRE141J-682Y C RESISTOR 6.8K 5% 1/4W R 585 QRE141J-104Y C RESISTOR 100K 5% 1/4W R 445 QRE141J-243Y C RESISTOR 24K 5% 1/4W R 587 QRE141J-101Y C RESISTOR 100 5% 1/4W R 446 QRE141J-392Y C RESISTOR 3.9K 5% 1/4W R 588 QRE141J-102Y C RESISTOR 1.0K 5% 1/4W R 447 QRE141J-104Y C RESISTOR 100K 5% 1/4W R 589 QRE141J-102Y C RESISTOR 1.0K 5% 1/4W R 450 QRE141J-124Y C RESISTOR 120K 5% 1/4W SP434 GV40205-001A IC HOLDER R 451 QRE141J-183Y C RESISTOR 18K 5% 1/4W R 452 QRE141J-682Y C RESISTOR 6.8K 5% 1/4W R 453 QRE141J-563Y C RESISTOR 56K 5% 1/4W R 454 QRE141J-154Y C RESISTOR 150K 5% 1/4W R 455 QRE141J-563Y C RESISTOR 56K 5% 1/4W R 456 QRE141J-154Y C RESISTOR 150K 5% 1/4W R 458 QRE141J-102Y C RESISTOR 1.0K 5% 1/4W R 459 QRE141J-102Y C RESISTOR 1.0K 5% 1/4W R 460 QRE141J-102Y C RESISTOR 1.0K 5% 1/4W R 477 QRE141J-123Y C RESISTOR 12K 5% 1/4W R 478 QRE141J-122Y C RESISTOR 1.2K 5% 1/4W R 480 QRE141J-103Y C RESISTOR 10K 5% 1/4W R 481 QRE141J-103Y C RESISTOR 10K 5% 1/4W R 482 QRE141J-103Y C RESISTOR 10K 5% 1/4W R 493 QRE141J-103Y C RESISTOR 10K 5% 1/4W R 494 QRE141J-103Y C RESISTOR 10K 5% 1/4W R 495 QRE141J-103Y C RESISTOR 10K 5% 1/4W R 496 QRE141J-102Y C RESISTOR 1.0K 5% 1/4W R 497 QRE141J-103Y C RESISTOR 10K 5% 1/4W R 501 QRE141J-104Y C RESISTOR 100K 5% 1/4W R 502 QRE141J-104Y C RESISTOR 100K 5% 1/4W R 503 QRE141J-303Y C RESISTOR 30K 5% 1/4W R 504 QRE141J-104Y C RESISTOR 100K 5% 1/4W R 505 QRE141J-223Y C RESISTOR 22K 5% 1/4W R 506 QRE141J-223Y C RESISTOR 22K 5% 1/4W R 507 QRE141J-303Y C RESISTOR 30K 5% 1/4W R 508 QRE141J-274Y C RESISTOR 270K 5% 1/4W R 509 QRE141J-101Y C RESISTOR 100 5% 1/4W R 510 QRE141J-823Y C RESISTOR 82K 5% 1/4W A Digitized in Heiloo Netherlands Area www.freeservicemanuals.info 3/29/2018 HX-Z1R Electrical parts list (Front board) A Item Parts number Parts name BZ801 QAN0045-001 BUZZER C 201 QFKC2EK-104 METAL CAPACITOR C 202 QFKC2EK-104 METAL CAPACITOR C 203 QFKC2EK-104 C 204 QEZ0581-478 C 205 C 211 C 212 Block No. 03 Remarks Area A Item Parts number Parts name Remarks C 823 QFVJ1HJ-334Z MF CAPACITOR .10MF 10% 250V C 825 QDGB1HK-102Y C CAPACITOR .10MF 10% 250V C 831 QDYB1CM-103Y C CAPACITOR METAL CAPACITOR .10MF 10% 250V C 832 QDYB1CM-103Y C CAPACITOR E CAPACITOR 4700MF C 835 QDGB1HK-102Y C CAPACITOR QEZ0581-478 E CAPACITOR 4700MF C 836 QEKC1EM-106Z E CAPACITOR 10MF 20% 25V QFLM1HJ-823Z M CAPACITOR .082MF 5% 50V C 837 QETN1AM-107Z E CAPACITOR 100MF 20% 10V QFLM1HJ-823Z M CAPACITOR .082MF 5% 50V C 838 QDGB1HK-102Y C CAPACITOR C 213 QFLM1HJ-823Z M CAPACITOR .082MF 5% 50V C 840 QEKC0JM-107Z E CAPACITOR 100MF 20% 6.3V C 214 QETM1VM-228 E CAPACITOR 2200MF 20% 35V C 889 QEKC1HM-475Z E CAPACITOR 4.7MF 20% 50V C 215 QETM1VM-228 E CAPACITOR 2200MF 20% 35V C 901 QCSB1HJ-100Y C CAPACITOR 10PF 5% 50V C 217 QETN1JM-107Z E CAPACITOR 100MF 20% 63V C 958 QDYB1CM-103Y C CAPACITOR C 218 QETN1HM-226Z E CAPACITOR 22MF 20% 50V C 959 QDYB1CM-103Y C CAPACITOR C 219 QDYB1CM-103Y C CAPACITOR C 960 QDYB1CM-103Y C CAPACITOR C 220 QETN1HM-226Z E CAPACITOR 22MF 20% 50V C 961 QDYB1CM-103Y C CAPACITOR C 221 QETN1HM-475Z E CAPACITOR 4.7MF 20% 50V C 962 QDYB1CM-103Y C CAPACITOR C 222 QETN1HM-475Z E CAPACITOR 4.7MF 20% 50V C 963 QDYB1CM-103Y C CAPACITOR C 236 QETM1EM-338 E CAPACITOR 3300MF 20% 25V CN 43 QGF1210G1-09 CONNECTOR C 240 QETN1HM-106Z E CAPACITOR 10MF 20% 50V CN205 QGB2510J1-15 CONNECTOR C 260 QETN1EM-476Z E CAPACITOR 47MF 20% 25V CN206 QGA2501F1-02 CONNECTOR C 601 FQCF31HZ-223Z D CAPACITOR CN207 QGB2510K2-07 CONNECTOR C 602 FQCF31HZ-223Z D CAPACITOR CN701 QGD2503F1-04 SOCKET C 603 QCBB1HK-221Y C CAPACITOR 220PF 10% 50V CN860 QGF1210G1-23 CONNECTOR C 604 QCBB1HK-221Y C CAPACITOR 220PF 10% 50V CN880 QGF1210G1-13 CONNECTOR C 605 QCBB1HK-221Y C CAPACITOR 220PF 10% 50V CN890 QGF1205F1-13 CONNECTOR C 606 QCBB1HK-221Y C CAPACITOR 220PF 10% 50V CP 1 ICP-N15-T ICP C 607 QETN1JM-476Z E CAPACITOR 47MF 20% 63V C1001 QDXB1CM-392Y C CAPACITOR C 608 QETN1JM-476Z E CAPACITOR 47MF 20% 63V C1002 QDXB1CM-392Y C CAPACITOR C 609 QCSB1HJ-100Y C CAPACITOR 10PF 5% 50V C1003 QDXB1CM-222Y C CAPACITOR C 610 QCSB1HJ-100Y C CAPACITOR 10PF 5% 50V C1004 QDGB1HK-102Y C CAPACITOR C 611 QETN1HM-476Z E CAPACITOR 47MF 20% 50V C1005 QDGB1HK-102Y C CAPACITOR C 612 QETN1HM-476Z E CAPACITOR 47MF 20% 50V C1006 QDGB1HK-102Y C CAPACITOR C 613 QFLM1HJ-473Z M CAPACITOR .047MF 5% 50V D 201 1N5402M-20 DIODE C 614 QFLM1HJ-473Z M CAPACITOR .047MF 5% 50V D 202 1N5402M-20 DIODE C 615 QFLM1HJ-473Z M CAPACITOR .047MF 5% 50V D 203 1N5402M-20 DIODE C 616 QFLM1HJ-473Z M CAPACITOR .047MF 5% 50V D 204 1N5402M-20 DIODE C 618 QCBB1HK-471Y C CAPACITOR 470PF 10% 50V D 211 1N5402M-20 DIODE C 621 QTE1V06-106Z E CAPACITOR D 212 1N5402M-20 DIODE C 622 QTE1V06-106Z E CAPACITOR D 213 1N5402M-20 DIODE C 623 QTE1V06-106Z E CAPACITOR D 214 1N5402M-20 DIODE C 624 QTE1V06-106Z E CAPACITOR D 219 DZ33BSC-T2 ZENER DIODE C 639 QETN1HM-105Z E CAPACITOR D 220 DZ9.1BSB-T2 ZENER DIODE C 651 QDYB1CM-103Y C CAPACITOR D 221 1SS119-041-T2 SI DIODE C 652 QDYB1CM-103Y C CAPACITOR D 240 DZ13BSB-T2 ZENER DIODE C 653 QFLM1HJ-104Z M CAPACITOR .10MF 5% 50V D 260 1SS119-041-T2 SI DIODE C 654 QFLM1HJ-104Z M CAPACITOR .10MF 5% 50V D 261 1SS119-041-T2 SI DIODE C 732 QFLM1HJ-104Z M CAPACITOR .10MF 5% 50V D 262 1SS119-041-T2 SI DIODE C 733 QFLM1HJ-104Z M CAPACITOR .10MF 5% 50V D 263 1SS119-041-T2 SI DIODE C 734 QDYB1CM-103Y C CAPACITOR D 264 DZ5.1BSB-T2 ZENER DIODE C 735 QDYB1CM-103Y C CAPACITOR D 619 1SS119-041-T2 SI DIODE C 736 QCBB1HK-221Y C CAPACITOR 220PF 10% 50V D 620 1SS119-041-T2 SI DIODE C 737 QCBB1HK-221Y C CAPACITOR 220PF 10% 50V D 622 DZ9.1BSB-T2 ZENER DIODE C 801 FQCF31HP-103Z C CAPACITOR D 650 1SS119-041-T2 SI DIODE C 803 QEKC0JM-227Z E CAPACITOR 220MF 20% 6.3V D 725 1SS119-041-T2 SI DIODE C 804 QEKC0JM-227Z E CAPACITOR 220MF 20% 6.3V D 801 1SS119-041-T2 SI DIODE C 805 QDGB1HK-102Y C CAPACITOR D 802 1SS119-041-T2 SI DIODE C 806 QEKC0JM-227Z E CAPACITOR 220MF 20% 6.3V D 803 11EQS03LN-T2 SB DIODE C 808 QCSB1HJ-270Y C CAPACITOR 27PF 5% 50V D 804 1SS119-041-T2 SI DIODE C 809 QCSB1HJ-300Y C CAPACITOR 30PF 5% 50V D 805 1SS119-041-T2 SI DIODE C 815 QEKC1HM-226Z E CAPACITOR 22MF 20% 50V D 806 1SS119-041-T2 SI DIODE C 817 QEKC1HM-226Z E CAPACITOR 22MF 20% 50V D 807 RB721Q-40-T2 SI DIODE C 820 QCZ0202-155Z ML C CAPACITOR 1.5MF D 810 1SS119-041-T2 SI DIODE C 821 QDYB1CM-103Y C CAPACITOR D 815 DZ6.2BSC-T2 ZENER DIODE 1.0MF 20% 50V A A A A A A A A A Digitized in Heiloo Netherlands Area .33MF 5% 50V 3-15 www.freeservicemanuals.info HX-Z1R Electrical parts list (Front board) A A A 3-16 Item Parts number Parts name 3/29/2018 Block No. 03 Remarks Area A Item Parts number Parts name D 816 DZ6.2BSC-T2 ZENER DIODE Q 812 2SD1991A/RS/-T TRANSISTOR D 831 DZ5.1BSB-T2 ZENER DIODE Q 813 2SD1991A/RS/-T TRANSISTOR D 832 DZ5.1BSB-T2 ZENER DIODE Q 814 2SD1991A/RS/-T TRANSISTOR D 833 DZ4.3BSB-T2 ZENER DIODE Q 815 2SD1991A/RS/-T TRANSISTOR D 901 L-192ZSRD-T LED Q 816 2SD1991A/RS/-T TRANSISTOR D 902 L-192ZSRD-T LED Q 817 2SD1991A/RS/-T TRANSISTOR D 903 L-192ZSRD-T LED Q 818 2SD1991A/RS/-T TRANSISTOR D 942 L-192ZSRD-T LED Q 819 2SD1991A/RS/-T TRANSISTOR D 943 L-192ZSRD-T LED Q 820 2SD1991A/RS/-T TRANSISTOR D 944 L-192ZSRD-T LED Q 821 2SD1991A/RS/-T TRANSISTOR D 945 L-192ZSRD-T LED Q 822 2SD1991A/RS/-T TRANSISTOR D 946 L-192ZSRD-T LED Q 823 2SD1991A/RS/-T TRANSISTOR D 947 L-192ZSRD-T LED Q 833 KRA111M-T D.TRANSISTOR D 948 L-192ZSRD-T LED Q 858 2SD1991A/RS/-T TRANSISTOR D 950 L-192ZSRD-T LED Q 875 KRC102M-T D.TRANSISTOR D 951 L-192ZSRD-T LED Q 879 2SD1991A/RS/-T TRANSISTOR D 962 L-192ZSRD-T LED Q 890 2SD1991A/RS/-T TRANSISTOR D 972 LC503MUR1-30Q LED Q 916 KTA1267/YG/-T TRANSISTOR D 973 LC503MUR1-30Q LED Q 917 KRC102M-T D.TRANSISTOR D1003 DZ2.4BSB-T2 ZENER DIODE Q 961 KTA1267/YG/-T TRANSISTOR FL801 QLF0096-001 FL TUBE FW202 QUM157-07DGZ4 FLAT WIRE FW204 QJK015-050604 FW221 Remarks Q 962 KRC102M-T D.TRANSISTOR R 202 QRJ146J-470X UNF C RESISTOR 47 5% 1/4W CONN.WIRE ASSY R 203 QRE141J-752Y C RESISTOR 7.5K 5% 1/4W QUM156-13DGZ4 FLAT WIRE R 204 QRE141J-223Y C RESISTOR 22K 5% 1/4W FW711 QUM154-33DGZ4 FLAT WIRE R 205 QRE141J-104Y C RESISTOR 100K 5% 1/4W FW800 QUM023-05Z4Z4 PARA RIBON WIRE R 215 QRE141J-473Y C RESISTOR 47K 5% 1/4W IC240 KIA7812API +12V REG.IC R 216 QRE141J-473Y C RESISTOR 47K 5% 1/4W IC602 STK402-030 IC R 217 QRE141J-273Y C RESISTOR 27K 5% 1/4W IC810 UPD784975AGF303 IC R 218 QRE141J-273Y C RESISTOR 27K 5% 1/4W IC811 BU2092 IC R 240 QRZ9005-100X F RESISTOR 10 1/4W IC951 GP1UM271XK IR DETECT UNIT R 260 QRE141J-202Y C RESISTOR 2.0K 5% 1/4W J 81 QNB0151-001 SPK TERMINAL R 261 QRE141J-202Y C RESISTOR 2.0K 5% 1/4W JS958 QSW0984-001 ROTARY ENCODER SEARCH R 262 QRE141J-202Y C RESISTOR 2.0K 5% 1/4W JS960 QSW0983-001 ROTARY ENCODER S/MODE VOL R 263 QRE141J-202Y C RESISTOR 2.0K 5% 1/4W JS962 QSW0862-001 ROTARY SWITCH MAIN VOL R 601 QRJ146J-101X UNF C RESISTOR 100 5% 1/4W J1001 QNS0204-001 3.5 JACK R 602 QRJ146J-101X UNF C RESISTOR 100 5% 1/4W L 601 QQLZ035-R39 INDUCTOR R 603 QRE141J-563Y C RESISTOR 56K 5% 1/4W L 602 QQLZ035-R39 INDUCTOR R 604 QRE141J-563Y C RESISTOR 56K 5% 1/4W L 801 QQL244K-100Z INDUCTOR R 605 FQRJ143J-122X UNF C RESISTOR L 802 QQL231K-220Y INDUCTOR R 606 FQRJ143J-122X UNF C RESISTOR L 803 QQL29BJ-100Z INDUCTOR R 607 QRE141J-563Y C RESISTOR 56K 5% 1/4W L 805 QQL244K-100Z INDUCTOR R 608 QRE141J-563Y C RESISTOR 56K 5% 1/4W L 806 QQL244K-100Z INDUCTOR R 613 QRJ146J-100X UNF C RESISTOR 10 5% 1/4W L 807 QQL231K-220Y INDUCTOR R 614 QRJ146J-100X UNF C RESISTOR 10 5% 1/4W L 815 QQR0621-001Z FERRITE BEADS R 615 FQRJ143J-100X UNF C RESISTOR L 872 QQR0621-001Z FERRITE BEADS R 616 FQRJ143J-100X UNF C RESISTOR L1001 QQL231K-470Y INDUCTOR R 617 QRE141J-221Y C RESISTOR 220 5% 1/4W L1002 QQL231K-470Y INDUCTOR R 618 QRE141J-221Y C RESISTOR 220 5% 1/4W L1003 QQR1277-001Z F.BEADS R 619 QRE141J-222Y C RESISTOR 2.2K 5% 1/4W Q 201 KTA1273/Y/-T TRANSISTOR R 620 QRE141J-222Y C RESISTOR 2.2K 5% 1/4W Q 260 KTC3203/OY/-T TRANSISTOR R 621 QRE141J-103Y C RESISTOR 10K 5% 1/4W Q 601 KTA1268/GL/-T TRANSISTOR R 623 QRE141J-103Y C RESISTOR 10K 5% 1/4W Q 602 KTA1268/GL/-T TRANSISTOR R 637 QRJ146J-820X UNF C RESISTOR 82 5% 1/4W Q 612 2SA1175/FE/-T TRANSISTOR R 639 QRL01DJ-821X OMF RESISTOR 820 5% 1W Q 613 KRC102M-T D.TRANSISTOR R 640 QRL01DJ-821X OMF RESISTOR 820 5% 1W Q 690 KTC3203/OY/-T TRANSISTOR R 650 FQRJ143J-4R7X UNF C RESISTOR Q 733 2SC3576-JVC-T TRANSISTOR R 651 FQRJ143J-4R7X UNF C RESISTOR Q 734 2SC3576-JVC-T TRANSISTOR R 653 QRT01DJ-R22X MF RESISTOR Q 735 2SC3576-JVC-T TRANSISTOR R 655 QRT01DJ-R22X MF RESISTOR 5% 1W Q 736 2SC3576-JVC-T TRANSISTOR R 666 QRE141J-333Y C RESISTOR 33K 5% 1/4W A A A A A A A A A A A A A A A A A 5% 1W Q 737 KRA111M-T D.TRANSISTOR R 667 QRE141J-103Y C RESISTOR 10K 5% 1/4W Q 810 2SD1991A/RS/-T TRANSISTOR R 668 QRE141J-103Y C RESISTOR 10K 5% 1/4W Q 811 2SD1991A/RS/-T TRANSISTOR R 674 QRJ146J-100X UNF C RESISTOR 10 5% 1/4W A Digitized in Heiloo Netherlands Area www.freeservicemanuals.info 3/29/2018 HX-Z1R Electrical parts list (Front board) A Item R 675 A A A Parts number QRE141J-102Y Parts name Block No. 03 Remarks Area A Item Parts number Parts name Remarks C RESISTOR 1.0K 5% 1/4W R 855 QRE141J-102Y C RESISTOR 1.0K 5% 1/4W R 676 QRE141J-102Y C RESISTOR 1.0K 5% 1/4W R 856 QRE141J-102Y C RESISTOR 1.0K 5% 1/4W R 690 QRE141J-103Y C RESISTOR 10K 5% 1/4W R 857 QRE141J-102Y C RESISTOR 1.0K 5% 1/4W R 725 QRE141J-823Y C RESISTOR 82K 5% 1/4W R 858 QRE141J-102Y C RESISTOR 1.0K 5% 1/4W R 726 QRE141J-104Y C RESISTOR 100K 5% 1/4W R 859 QRE141J-102Y C RESISTOR 1.0K 5% 1/4W R 731 FQRJ143J-4R7X UNF C RESISTOR R 860 QRE141J-102Y C RESISTOR 1.0K 5% 1/4W R 732 FQRJ143J-4R7X UNF C RESISTOR R 861 QRE141J-102Y C RESISTOR 1.0K 5% 1/4W R 733 QRE141J-472Y C RESISTOR 4.7K 5% 1/4W R 862 QRE141J-102Y C RESISTOR 1.0K 5% 1/4W R 734 QRE141J-472Y C RESISTOR 4.7K 5% 1/4W R 863 QRE141J-102Y C RESISTOR 1.0K 5% 1/4W R 735 QRE141J-472Y C RESISTOR 4.7K 5% 1/4W R 865 QRE141J-102Y C RESISTOR 1.0K 5% 1/4W R 736 QRE141J-472Y C RESISTOR 4.7K 5% 1/4W R 866 QRE141J-102Y C RESISTOR 1.0K 5% 1/4W R 737 QRJ146J-820X UNF C RESISTOR 82 5% 1/4W R 867 QRE141J-102Y C RESISTOR 1.0K 5% 1/4W R 801 QRE141J-331Y C RESISTOR 330 5% 1/4W R 868 QRE141J-133Y C RESISTOR 13K 5% 1/4W R 802 QRE141J-270Y C RESISTOR 27 5% 1/4W R 869 QRE141J-102Y C RESISTOR 1.0K 5% 1/4W R 805 QRE141J-103Y C RESISTOR 10K 5% 1/4W R 870 QRE141J-221Y C RESISTOR 220 5% 1/4W R 806 QRE141J-103Y C RESISTOR 10K 5% 1/4W R 871 QRE141J-102Y C RESISTOR 1.0K 5% 1/4W R 807 QRE141J-102Y C RESISTOR 1.0K 5% 1/4W R 872 QRE141J-102Y C RESISTOR 1.0K 5% 1/4W R 808 QRE141J-104Y C RESISTOR 100K 5% 1/4W R 873 QRE141J-102Y C RESISTOR 1.0K 5% 1/4W R 810 QRE141J-103Y C RESISTOR 10K 5% 1/4W R 876 QRE141J-103Y C RESISTOR 10K 5% 1/4W R 811 QRE141J-103Y C RESISTOR 10K 5% 1/4W R 877 QRE141J-133Y C RESISTOR 13K 5% 1/4W R 812 QRE141J-103Y C RESISTOR 10K 5% 1/4W R 878 QRE141J-104Y C RESISTOR 100K 5% 1/4W R 813 QRE141J-221Y C RESISTOR 220 5% 1/4W R 879 QRE141J-104Y C RESISTOR 100K 5% 1/4W R 814 QRE141J-562Y C RESISTOR 5.6K 5% 1/4W R 880 QRE141J-104Y C RESISTOR 100K 5% 1/4W R 815 QRE141J-103Y C RESISTOR 10K 5% 1/4W R 881 QRE141J-103Y C RESISTOR 10K 5% 1/4W R 816 QRE141J-104Y C RESISTOR 100K 5% 1/4W R 882 QRE141J-103Y C RESISTOR 10K 5% 1/4W R 817 QRE141J-103Y C RESISTOR 10K 5% 1/4W R 883 QRE141J-103Y C RESISTOR 10K 5% 1/4W R 818 QRE141J-103Y C RESISTOR 10K 5% 1/4W R 884 QRE141J-102Y C RESISTOR 1.0K 5% 1/4W R 819 QRE141J-102Y C RESISTOR 1.0K 5% 1/4W R 885 QRE141J-103Y C RESISTOR 10K 5% 1/4W R 820 QRE141J-102Y C RESISTOR 1.0K 5% 1/4W R 886 QRE141J-103Y C RESISTOR 10K 5% 1/4W R 821 QRE141J-104Y C RESISTOR 100K 5% 1/4W R 887 QRE141J-221Y C RESISTOR 220 5% 1/4W R 822 QRE141J-104Y C RESISTOR 100K 5% 1/4W R 888 QRE141J-221Y C RESISTOR 220 5% 1/4W R 823 QRE141J-104Y C RESISTOR 100K 5% 1/4W R 889 QRE141J-221Y C RESISTOR 220 5% 1/4W R 824 QRE141J-104Y C RESISTOR 100K 5% 1/4W R 890 QRE141J-133Y C RESISTOR 13K 5% 1/4W R 825 QRE141J-104Y C RESISTOR 100K 5% 1/4W R 891 QRE141J-104Y C RESISTOR 100K 5% 1/4W R 826 QRE141J-104Y C RESISTOR 100K 5% 1/4W R 892 QRE141J-103Y C RESISTOR 10K 5% 1/4W R 827 QRE141J-102Y C RESISTOR 1.0K 5% 1/4W R 893 QRE141J-102Y C RESISTOR 1.0K 5% 1/4W R 828 QRE141J-103Y C RESISTOR 10K 5% 1/4W R 894 QRE141J-102Y C RESISTOR 1.0K 5% 1/4W R 829 QRE141J-103Y C RESISTOR 10K 5% 1/4W R 895 QRE141J-102Y C RESISTOR 1.0K 5% 1/4W R 830 QRE141J-104Y C RESISTOR 100K 5% 1/4W R 896 QRE141J-103Y C RESISTOR 10K 5% 1/4W R 831 QRE141J-104Y C RESISTOR 100K 5% 1/4W R 897 QRE141J-103Y C RESISTOR 10K 5% 1/4W R 832 QRE141J-104Y C RESISTOR 100K 5% 1/4W R 899 QRE141J-103Y C RESISTOR 10K 5% 1/4W R 833 QRE141J-104Y C RESISTOR 100K 5% 1/4W R 900 QRE141J-102Y C RESISTOR 1.0K 5% 1/4W R 834 QRE141J-104Y C RESISTOR 100K 5% 1/4W R 901 QRE141J-102Y C RESISTOR 1.0K 5% 1/4W R 835 QRE141J-104Y C RESISTOR 100K 5% 1/4W R 902 QRE141J-122Y C RESISTOR 1.2K 5% 1/4W R 836 QRE141J-104Y C RESISTOR 100K 5% 1/4W R 903 QRE141J-152Y C RESISTOR 1.5K 5% 1/4W R 837 QRE141J-104Y C RESISTOR 100K 5% 1/4W R 904 QRE141J-222Y C RESISTOR 2.2K 5% 1/4W R 838 QRE141J-102Y C RESISTOR 1.0K 5% 1/4W R 905 QRE141J-272Y C RESISTOR 2.7K 5% 1/4W R 839 QRE141J-102Y C RESISTOR 1.0K 5% 1/4W R 906 QRE141J-392Y C RESISTOR 3.9K 5% 1/4W R 840 QRE141J-103Y C RESISTOR 10K 5% 1/4W R 907 QRE141J-163Y C RESISTOR 16K 5% 1/4W R 841 QRE141J-103Y C RESISTOR 10K 5% 1/4W R 908 QRE141J-103Y C RESISTOR 10K 5% 1/4W R 842 QRE141J-104Y C RESISTOR 100K 5% 1/4W R 909 QRE141J-334Y C RESISTOR 330K 5% 1/4W R 843 QRE141J-221Y C RESISTOR 220 5% 1/4W R 911 QRE141J-201Y C RESISTOR 200 5% 1/4W R 844 QRE141J-104Y C RESISTOR 100K 5% 1/4W R 912 QRE141J-201Y C RESISTOR 200 5% 1/4W R 845 QRE141J-102Y C RESISTOR 1.0K 5% 1/4W R 913 QRE141J-201Y C RESISTOR 200 5% 1/4W R 846 QRE141J-102Y C RESISTOR 1.0K 5% 1/4W R 916 QRE141J-223Y C RESISTOR 22K 5% 1/4W R 847 QRE141J-102Y C RESISTOR 1.0K 5% 1/4W R 917 QRE141J-103Y C RESISTOR 10K 5% 1/4W R 848 QRE141J-331Y C RESISTOR 330 5% 1/4W R 918 QRE141J-133Y C RESISTOR 13K 5% 1/4W R 849 QRE141J-102Y C RESISTOR 1.0K 5% 1/4W R 919 QRE141J-104Y C RESISTOR 100K 5% 1/4W R 850 QRE141J-102Y C RESISTOR 1.0K 5% 1/4W R 920 QRE141J-102Y C RESISTOR 1.0K 5% 1/4W R 851 QRE141J-153Y C RESISTOR 15K 5% 1/4W R 921 QRE141J-102Y C RESISTOR 1.0K 5% 1/4W R 852 QRE141J-104Y C RESISTOR 100K 5% 1/4W R 922 QRE141J-122Y C RESISTOR 1.2K 5% 1/4W R 853 QRE141J-104Y C RESISTOR 100K 5% 1/4W R 923 QRE141J-152Y C RESISTOR 1.5K 5% 1/4W R 854 QRE141J-102Y C RESISTOR 1.0K 5% 1/4W R 924 QRE141J-222Y C RESISTOR 2.2K 5% 1/4W Digitized in Heiloo Netherlands Area 3-17 www.freeservicemanuals.info HX-Z1R Electrical parts list (Front board) A 3-18 Item Parts number Parts name 3/29/2018 Block No. 03 Remarks Area A Item Parts number QSK0109-001 Parts name R 925 QRE141J-272Y C RESISTOR 2.7K 5% 1/4W RY 1 R 926 QRE141J-392Y C RESISTOR 3.9K 5% 1/4W RY 2 QSK0109-001 RELAY R 927 QRE141J-562Y C RESISTOR 5.6K 5% 1/4W S 900 QSW0674-001Z TACT SWITCH R 928 QRE141J-103Y C RESISTOR 10K 5% 1/4W S 901 QSW0674-001Z TACT SWITCH R 929 QRE141J-753Y C RESISTOR 75K 5% 1/4W S 902 QSW0674-001Z TACT SWITCH R 930 QRE141J-104Y C RESISTOR 100K 5% 1/4W S 903 QSW0674-001Z TACT SWITCH R 931 QRE141J-104Y C RESISTOR 100K 5% 1/4W S 904 QSW0674-001Z TACT SWITCH R 932 QRE141J-104Y C RESISTOR 100K 5% 1/4W S 905 QSW0674-001Z TACT SWITCH R 933 QRE141J-104Y C RESISTOR 100K 5% 1/4W S 906 QSW0674-001Z TACT SWITCH R 934 QRE141J-104Y C RESISTOR 100K 5% 1/4W S 920 QSW0674-001Z TACT SWITCH R 935 QRE141J-104Y C RESISTOR 100K 5% 1/4W S 921 QSW0674-001Z TACT SWITCH R 936 QRE141J-104Y C RESISTOR 100K 5% 1/4W S 922 QSW0674-001Z TACT SWITCH R 937 QRE141J-104Y C RESISTOR 100K 5% 1/4W S 923 QSW0674-001Z TACT SWITCH R 938 QRE141J-104Y C RESISTOR 100K 5% 1/4W S 924 QSW0674-001Z TACT SWITCH R 939 QRE141J-104Y C RESISTOR 100K 5% 1/4W S 925 QSW0674-001Z TACT SWITCH R 940 QRE141J-104Y C RESISTOR 100K 5% 1/4W S 926 QSW0674-001Z TACT SWITCH R 941 QRE141J-102Y C RESISTOR 1.0K 5% 1/4W S 927 QSW0674-001Z TACT SWITCH R 942 QRE141J-102Y C RESISTOR 1.0K 5% 1/4W S 928 QSW0674-001Z TACT SWITCH R 943 QRE141J-122Y C RESISTOR 1.2K 5% 1/4W S 940 QSW0674-001Z TACT SWITCH R 944 QRE141J-152Y C RESISTOR 1.5K 5% 1/4W S 941 QSW0674-001Z TACT SWITCH R 945 QRE141J-222Y C RESISTOR 2.2K 5% 1/4W S 942 QSW0674-001Z TACT SWITCH R 946 QRE141J-272Y C RESISTOR 2.7K 5% 1/4W S 943 QSW0674-001Z TACT SWITCH R 947 QRE141J-392Y C RESISTOR 3.9K 5% 1/4W S 944 QSW0674-001Z TACT SWITCH R 948 QRE141J-562Y C RESISTOR 5.6K 5% 1/4W S 945 QSW0674-001Z TACT SWITCH R 949 QRE141J-103Y C RESISTOR 10K 5% 1/4W S 946 QSW0674-001Z TACT SWITCH R 950 QRE141J-334Y C RESISTOR 330K 5% 1/4W S 947 QSW0674-001Z TACT SWITCH R 952 QRE141J-201Y C RESISTOR 200 5% 1/4W S 948 QSW0674-001Z TACT SWITCH R 953 QRE141J-201Y C RESISTOR 200 5% 1/4W S 949 QSW0674-001Z TACT SWITCH R 954 QRE141J-201Y C RESISTOR 200 5% 1/4W SP801 VYH7653-001 IC HOLDER R 955 QRE141J-201Y C RESISTOR 200 5% 1/4W X 801 QAX0724-001Z CRYSTAL R 956 QRE141J-201Y C RESISTOR 200 5% 1/4W R 957 QRE141J-201Y C RESISTOR 200 5% 1/4W R 958 QRE141J-201Y C RESISTOR 200 5% 1/4W R 959 QRE141J-201Y C RESISTOR 200 5% 1/4W R 960 QRE141J-201Y C RESISTOR 200 5% 1/4W R 961 QRE141J-101Y C RESISTOR 100 5% 1/4W R 962 QRE141J-472Y C RESISTOR 4.7K 5% 1/4W R 963 QRE141J-101Y C RESISTOR 100 5% 1/4W R 969 QRE141J-472Y C RESISTOR 4.7K 5% 1/4W R 970 QRE141J-103Y C RESISTOR 10K 5% 1/4W R 971 QRE141J-103Y C RESISTOR 10K 5% 1/4W R 972 QRE141J-102Y C RESISTOR 1.0K 5% 1/4W R 973 QRE141J-102Y C RESISTOR 1.0K 5% 1/4W R 975 QRE141J-102Y C RESISTOR 1.0K 5% 1/4W R 976 QRE141J-102Y C RESISTOR 1.0K 5% 1/4W R 978 QRE141J-102Y C RESISTOR 1.0K 5% 1/4W R 980 QRE141J-104Y C RESISTOR 100K 5% 1/4W R 981 QRE141J-104Y C RESISTOR 100K 5% 1/4W R 982 QRE141J-104Y C RESISTOR 100K 5% 1/4W R 983 QRE141J-104Y C RESISTOR 100K 5% 1/4W R 984 QRE141J-104Y C RESISTOR 100K 5% 1/4W R 985 QRE141J-104Y C RESISTOR 100K 5% 1/4W R 986 QRE141J-133Y C RESISTOR 13K 5% 1/4W R 987 QRE141J-104Y C RESISTOR 100K 5% 1/4W R 988 QRE141J-133Y C RESISTOR 13K 5% 1/4W R 989 QRE141J-133Y C RESISTOR 13K 5% 1/4W R 990 QRE141J-133Y C RESISTOR 13K 5% 1/4W R 991 QRE141J-104Y C RESISTOR 100K 5% 1/4W R 992 QRE141J-133Y C RESISTOR 13K 5% 1/4W R 993 QRE141J-104Y C RESISTOR 100K 5% 1/4W R 994 QRE141J-104Y C RESISTOR 100K 5% 1/4W R 995 QRE141J-104Y C RESISTOR 100K 5% 1/4W R 996 QRE141J-104Y C RESISTOR 100K 5% 1/4W Digitized in Heiloo Netherlands RELAY Remarks Area www.freeservicemanuals.info 3/29/2018 HX-Z1R Electrical parts list (Tuner board) A Item Parts number Parts name Block No. 04 Remarks Area A Item Parts number Parts name C CAPACITOR CF 3 QAX0610-001Z C DISCRIMINATOR NCB21HK-103X C CAPACITOR CN 1 QGF1205F1-13 CONNECTOR EETC1CM-106ZJC E CAPACITOR D 1 1SS133-T2 SI DIODE C 4 NCB21HK-103X C CAPACITOR D 2 1SS133-T2 SI DIODE C 6 NCB21HK-222X C CAPACITOR D 3 1SS133-T2 SI DIODE C 7 NCB21HK-102X C CAPACITOR D 4 1SS133-T2 SI DIODE C 8 NCB21HK-102X C CAPACITOR D 11 1SS133-T2 SI DIODE C 9 NCB21HK-102X C CAPACITOR IC 1 LA1838 IC IC C 1 NCB21HK-223X C 2 C 3 C 10 NCS21HJ-120X C CAPACITOR IC 2 LC72136N C 11 NCB21HK-104X C CAPACITOR IC 3 LC72723 IC(RDS) C 12 NCB21HK-473X C CAPACITOR J 1 QNB0014-001 ANT TERMINAL L 1 QQR1094-001 COIL BLOCK L 2 QQL231K-330Y INDUCTOR INDUCTOR C 13 NCS21HJ-120X C CAPACITOR C 14 QEKC1AM-107Z E CAPACITOR C 15 NCS21HJ-120X C CAPACITOR L 3 QQL231K-4R7Y 100MF 20% 10V C 16 NCS21HJ-120X C CAPACITOR L 70 QQL231K-101Y INDUCTOR C 17 NCB21HK-392X C CAPACITOR Q 1 2SC2814/4-5/-X TRANSISTOR C 18 QEQ61HM-474Z NP E CAPACITOR Q 2 2SD601A/QR/-X TRANSISTOR C 19 NCB21HK-473X C CAPACITOR Q 3 2SD601A/QR/-X TRANSISTOR C 20 NCB21HK-102X C CAPACITOR Q 4 KRA107S-X TRANSISTOR C 21 NCB21HK-223X C CAPACITOR Q 5 KRA107S-X TRANSISTOR C 22 NCS21HJ-151X C CAPACITOR R 2 NRSA02J-331X MG RESISTOR C 23 NCS21HJ-151X C CAPACITOR R 3 NRSA02J-224X MG RESISTOR C 24 NCS21HJ-151X C CAPACITOR R 4 NRSA02J-331X MG RESISTOR C 25 QEKC1AM-107Z E CAPACITOR R 5 NRSA02J-560X MG RESISTOR C 26 NCB21HK-103X C CAPACITOR R 6 NRSA02J-120X MG RESISTOR C 27 NCB21HK-103X C CAPACITOR R 10 NRSA02J-222X MG RESISTOR C 30 EETC1CM-107ZJC E CAPACITOR R 11 NRSA02J-472X MG RESISTOR C 31 EEKC1CM-226ZJC E CAPACITOR R 12 NRSA02J-472X MG RESISTOR C 32 NCB21HK-473X C CAPACITOR R 13 NRSA02J-103X MG RESISTOR C 33 NCB21HK-473X C CAPACITOR R 14 NRSA02J-104X MG RESISTOR C 34 NCB21HK-223X C CAPACITOR R 15 NRSA02J-332X MG RESISTOR C 35 NCB21HK-473X C CAPACITOR R 16 NRSA02J-472X MG RESISTOR C 36 EEKC1HM-105ZJC E CAPACITOR R 17 QRZ9005-680X F RESISTOR C 37 EEKC1HM-105ZJC E CAPACITOR R 18 NRSA02J-102X MG RESISTOR C 38 EETC1HM-224ZJC E CAPACITOR R 19 NRSA02J-102X MG RESISTOR C 39 EETC1HM-105ZJC E CAPACITOR R 20 NRSA02J-102X MG RESISTOR C 40 QETN1CM-106Z E CAPACITOR 10MF 20% 16V R 21 NRSA02J-562X MG RESISTOR C 41 QETN1CM-106Z E CAPACITOR 10MF 20% 16V R 22 NRSA02J-472X MG RESISTOR C 42 NCB21HK-182X C CAPACITOR R 23 NRSA02J-182X MG RESISTOR C 43 NCB21HK-182X C CAPACITOR R 24 NRSA02J-103X MG RESISTOR C 44 QETN1CM-106Z E CAPACITOR 10MF 20% 16V R 25 NRSA02J-331X MG RESISTOR C 45 QETN1CM-106Z E CAPACITOR 10MF 20% 16V R 26 NRSA02J-222X MG RESISTOR C 46 NCB21HK-223X C CAPACITOR R 27 NRSA02J-103X MG RESISTOR C 47 EETC1HM-105ZJC E CAPACITOR R 28 NRSA02J-103X MG RESISTOR C 48 NCB21HK-222X C CAPACITOR R 29 NRSA02J-103X MG RESISTOR C 49 NCS21HJ-471X C CAPACITOR R 30 NRSA02J-122X MG RESISTOR C 50 EEKC1CM-226ZJC E CAPACITOR R 31 NRSA02J-102X MG RESISTOR C 51 EEKC1HM-105ZJC E CAPACITOR R 32 NRSA02J-102X MG RESISTOR C 52 QFVJ1HJ-274Z MF CAPACITOR R 33 NRSA02J-331X MG RESISTOR C 53 EETC1CM-226ZJC E CAPACITOR R 34 NRSA02J-470X MG RESISTOR C 54 NCB21HK-473X C CAPACITOR R 35 NRSA02J-562X MG RESISTOR C 55 NCS21HJ-330X C CAPACITOR R 36 NRSA02J-332X MG RESISTOR C 56 NCS21HJ-100X C CAPACITOR R 37 NRSA02J-103X MG RESISTOR C 57 NCB21HK-102X C CAPACITOR R 38 NRSA02J-393X MG RESISTOR C 58 NCB21HK-473X C CAPACITOR R 39 NRSA02J-393X MG RESISTOR C 59 NCB21HK-102X C CAPACITOR R 40 NRSA02J-393X MG RESISTOR C 70 NCS21HJ-220X C CAPACITOR R 41 NRSA02J-332X MG RESISTOR C 71 NCS21HJ-220X C CAPACITOR R 60 NRSA02J-0R0X MG RESISTOR C 72 NCB21HK-561X C CAPACITOR R 72 NRSA02J-102X MG RESISTOR C 73 NCB21HK-104X C CAPACITOR R 73 NRSA02J-102X MG RESISTOR C 74 NCB21HK-104X C CAPACITOR T 1 QQR0793-001 IFT C 75 EETC1HM-106ZJC E CAPACITOR TU 1 QAU0160-001 FRONT END C 76 NCB21HK-331X C CAPACITOR X 1 QAX0402-001 CRYSTAL X 70 QAX0263-001Z CRYSTAL CF 1 QAX0420-001 C FILTER CF 2 QAX0458-001Z C FILTER .47MF 20% 50V 100MF 20% 10V A .27MF 5% 50V Digitized in Heiloo Netherlands Remarks Area 68 1/4W 3-19 www.freeservicemanuals.info HX-Z1R Electrical parts list (CD servo board) A Item C 253 3-20 Parts number NCB31CK-104X Parts name 3/29/2018 Block No. 05 Remarks C CAPACITOR Area A Item Parts number Parts name C 854 NCB31EK-103X C CAPACITOR C 254 QERF1AM-476Z E CAPACITOR 47MF 20% 10V C 855 NCB31CK-104X C CAPACITOR C 291 QERF1AM-476Z E CAPACITOR 47MF 20% 10V C 859 NCF31AZ-105X C CAPACITOR C 601 NCB31HK-222X C CAPACITOR C 860 NCF31AZ-105X C CAPACITOR C 602 NCB31HK-222X C CAPACITOR CN601 QGF1016F3-16 CONNECTOR C 603 NCB31EK-223X C CAPACITOR CN651 QGF1016F3-19 CONNECTOR C 604 NCB31EK-223X C CAPACITOR CN801 QGA2001C1-06 6P PLUG ASSY C 605 NCS31HJ-471X C CAPACITOR CN854 QGB2016K1-07 CONNECTOR C 606 NCS31HJ-820X C CAPACITOR CN855 QGG2002M4-10 CONNECTOR C 608 NCB31HK-122X C CAPACITOR D 851 DZ5.6BSB-T2 ZENER DIODE IC251 UPD780024A-B76 IC IC601 AN22000A-W IC C 610 NCB31CK-273X C CAPACITOR C 612 QERF1HM-105Z E CAPACITOR C 613 NCB31AK-224X C CAPACITOR IC602 BA15218F-XE IC C 614 NCB31CK-273X C CAPACITOR IC651 MN35510AL IC 1.0MF 20% 50V C 615 NCB31HK-472X C CAPACITOR IC652 BA15218F-XE IC C 616 NCB31EK-103X C CAPACITOR IC801 LA6541-X IC C 617 NCS31HJ-331X C CAPACITOR IC851 LB1641 IC C 620 NCS31HJ-330X C CAPACITOR IC852 LB1641 IC C 621 NCB30JK-105X C CAPACITOR Q 291 2SA952/LK/-T TRANSISTOR C 622 NCB31CK-473X C CAPACITOR Q 631 2SB709A/RS/-X SI.TRANSISTOR C 623 NCF31AZ-105X C CAPACITOR R 253 NRSA63J-102X MG RESISTOR C 624 QERF0JM-107Z E CAPACITOR R 254 NRSA63J-102X MG RESISTOR C 625 NCB31CK-104X C CAPACITOR R 255 NRSA63J-102X MG RESISTOR C 631 QERF1CM-106Z E CAPACITOR R 256 NRSA63J-102X MG RESISTOR C 632 NCF31AZ-105X C CAPACITOR R 257 NRSA63J-102X MG RESISTOR C 633 NCB31EK-223X C CAPACITOR R 260 NRSA63J-222X MG RESISTOR C 641 NCB31CK-473X C CAPACITOR R 261 NRSA63J-223X MG RESISTOR C 642 NCB31HK-472X C CAPACITOR R 262 NRSA63J-223X MG RESISTOR C 651 NCS31HJ-120X C CAPACITOR R 263 NRSA63J-223X MG RESISTOR C 652 NCS31HJ-120X C CAPACITOR R 264 NRSA63J-223X MG RESISTOR C 653 NCB31CK-104X C CAPACITOR R 265 NRSA63J-223X MG RESISTOR C 655 NCB31CK-104X C CAPACITOR R 278 NRSA63J-103X MG RESISTOR C 656 NCB31CK-104X C CAPACITOR R 280 NRSA63J-102X MG RESISTOR C 657 QERF1AM-227Z E CAPACITOR R 281 NRSA63J-102X MG RESISTOR C 658 NCB31CK-104X C CAPACITOR R 284 NRSA63J-102X MG RESISTOR C 661 NCS31HJ-471X C CAPACITOR R 291 NRSA63J-122X MG RESISTOR C 663 NCB31EK-223X C CAPACITOR R 292 NRSA63J-103X MG RESISTOR C 664 NCB31EK-223X C CAPACITOR R 294 NRSA63J-102X MG RESISTOR C 665 NCB31AK-154X C CAPACITOR R 601 NRSA63J-474X MG RESISTOR C 668 NCB31CK-473X C CAPACITOR R 602 NRSA63J-274X MG RESISTOR C 669 QERF1AM-227Z E CAPACITOR R 603 NRSA63J-393X MG RESISTOR C 672 NCB31AK-334X C CAPACITOR R 604 NRSA63J-274X MG RESISTOR C 673 ECA1AAD101XI E CAPACITOR R 606 NRSA63J-623X MG RESISTOR C 677 NCB31CK-104X C CAPACITOR R 607 NRSA63J-393X MG RESISTOR C 679 QERF0JM-107Z E CAPACITOR R 608 NRSA63J-0R0X MG RESISTOR C 680 NCB31CK-104X C CAPACITOR R 609 NRSA63J-472X MG RESISTOR C 691 NCS31HJ-391X C CAPACITOR R 611 NRSA63J-822X MG RESISTOR C 692 NCS31HJ-391X C CAPACITOR R 613 NRSA63J-472X MG RESISTOR C 693 NCB31HK-682X C CAPACITOR R 614 NRSA63J-153X MG RESISTOR C 694 NCB31HK-682X C CAPACITOR R 618 NRSA63J-472X MG RESISTOR C 695 NCB31CK-473X C CAPACITOR R 619 NRSA63J-472X MG RESISTOR C 696 QERF1CM-106Z E CAPACITOR 10MF 20% 16V R 620 NRSA63J-472X MG RESISTOR C 699 QERF1AM-227Z E CAPACITOR 220MF 20% 10V R 621 NRSA63J-472X MG RESISTOR C 801 NCB31HK-682X C CAPACITOR R 622 NRSA63J-223X MG RESISTOR C 802 NCB31HK-472X C CAPACITOR R 623 NRSA63J-223X MG RESISTOR C 811 NCS31HJ-391X C CAPACITOR R 626 NRSA63J-103X MG RESISTOR C 812 NCS31HJ-391X C CAPACITOR R 627 NRSA63J-103X MG RESISTOR C 813 NCS31HJ-391X C CAPACITOR R 628 NRSA63J-155X MG RESISTOR C 814 NCS31HJ-391X C CAPACITOR R 631 NRSA63J-2R2X MG RESISTOR C 821 NCF31AZ-105X C CAPACITOR R 632 NRSA63J-100X MG RESISTOR 100MF 20% 6.3V 10MF 20% 16V 220MF 20% 10V 220MF 20% 10V 100MF 20% 6.3V C 822 QERF1AM-227Z E CAPACITOR 220MF 20% 10V R 634 NRSA63J-120X MG RESISTOR C 852 QERF1CM-106Z E CAPACITOR 10MF 20% 16V R 635 NRSA63J-121X MG RESISTOR C 853 NCB31EK-103X C CAPACITOR R 636 NRSA63J-910X MG RESISTOR Digitized in Heiloo Netherlands Remarks Area www.freeservicemanuals.info 3/29/2018 HX-Z1R Electrical parts list (CD servo board) A Item Parts number Parts name Block No. 05 Remarks Area A Item Parts number Parts name R 641 NRSA63J-823X MG RESISTOR R 885 NRSA63J-102X MG RESISTOR R 642 NRSA63J-564X MG RESISTOR R 886 NRSA63J-102X MG RESISTOR R 651 NRSA63J-102X MG RESISTOR R 887 NRSA63J-102X MG RESISTOR R 652 NRSA63J-102X MG RESISTOR W 601 QUB220-07HPDT SIN TWIST WIRE R 653 NRSA63J-102X MG RESISTOR X 251 QAX0720-001Z C RESONATOR R 654 NRSA63J-101X MG RESISTOR X 651 QAX0413-001Z CRYSTAL R 655 NRSA63J-102X MG RESISTOR R 656 NRSA63J-102X MG RESISTOR R 657 NRSA63J-102X MG RESISTOR R 658 NRSA63J-102X MG RESISTOR R 659 NRSA63J-102X MG RESISTOR R 662 NRSA63J-683X MG RESISTOR R 663 NRSA63J-124X MG RESISTOR R 664 NRSA63J-331X MG RESISTOR R 665 NRSA63J-271X MG RESISTOR R 666 NRSA63J-221X MG RESISTOR R 667 NRSA63J-4R7X MG RESISTOR R 668 NRSA63J-155X MG RESISTOR R 670 NRSA63J-101X MG RESISTOR R 672 NRSA63J-272X MG RESISTOR R 682 NRSA63J-102X MG RESISTOR R 691 NRSA63J-103X MG RESISTOR R 692 NRSA63J-103X MG RESISTOR R 695 NRSA63J-243X MG RESISTOR R 696 NRSA63J-243X MG RESISTOR R 701 NRSA63J-821X MG RESISTOR R 702 NRSA63J-821X MG RESISTOR R 703 NRSA63J-103X MG RESISTOR R 704 NRSA63J-103X MG RESISTOR R 705 NRSA63J-562X MG RESISTOR R 706 NRSA63J-202X MG RESISTOR R 707 NRSA63J-682X MG RESISTOR R 708 NRSA63J-101X MG RESISTOR R 709 NRSA63J-101X MG RESISTOR R 710 NRSA63J-221X MG RESISTOR R 801 NRSA63J-272X MG RESISTOR R 802 NRSA63J-472X MG RESISTOR R 803 NRSA63J-472X MG RESISTOR R 804 NRSA63J-823X MG RESISTOR R 805 NRSA63J-912X MG RESISTOR R 806 NRSA63J-473X MG RESISTOR R 807 NRSA63J-272X MG RESISTOR R 808 NRSA63J-433X MG RESISTOR R 809 NRSA63J-122X MG RESISTOR R 811 NRSA63J-103X MG RESISTOR R 831 NRSA63J-151X MG RESISTOR R 832 NRSA63J-103X MG RESISTOR R 842 NRSA63J-472X MG RESISTOR R 851 NRSA63J-102X MG RESISTOR R 852 NRSA63J-102X MG RESISTOR R 853 NRSA63J-102X MG RESISTOR R 854 NRSA63J-102X MG RESISTOR R 861 NRSA63J-102X MG RESISTOR R 862 NRSA63J-102X MG RESISTOR R 863 NRSA63J-102X MG RESISTOR R 864 NRSA63J-102X MG RESISTOR R 865 NRSA63J-102X MG RESISTOR R 866 NRSA63J-102X MG RESISTOR R 880 NRSA63J-102X MG RESISTOR R 881 NRSA63J-102X MG RESISTOR R 882 NRSA63J-102X MG RESISTOR R 883 NRSA63J-102X MG RESISTOR R 884 NRSA63J-102X MG RESISTOR Electrical parts list (CD switch board ) A Item Parts number Parts name CN804 QGB2016J1-07 CONNECTOR CN805 QGB2012J1-10 CONNECTOR SW 1 QSW0859-001 LEVER SWITCH SW 2 QSW0859-001 LEVER SWITCH SW 3 QSW0859-001 LEVER SWITCH SW 4 QSW0859-001 LEVER SWITCH SW 5 QSW0859-001 LEVER SWITCH SW 6 QSW0859-001 LEVER SWITCH Digitized in Heiloo Netherlands Remarks Area Block No. 06 Remarks Area 3-21 www.freeservicemanuals.info HX-Z1R 3/29/2018 Block No. 07 Electrical parts list (Head amplifier board) A A 3-22 Item Parts number Remarks Parts name C 101 NCS21HJ-821X C CAPACITOR C 102 NCS21HJ-221X C CAPACITOR C 103 QEKJ0JM-227Z E CAPACITOR C 104 NCB21HK-333X C 105 NCB21HK-222X Area A Item Parts number NRSA63J-242X MG RESISTOR R 104 NRSA63J-122X MG RESISTOR R 105 NRSA63J-104X MG RESISTOR C CAPACITOR R 106 NRSA63J-332X MG RESISTOR C CAPACITOR R 107 NRSA63J-123X MG RESISTOR R 108 NRSA63J-562X MG RESISTOR R 109 NRSA63J-102X MG RESISTOR 220MF 20% 6.3V 10MF 20% 16V C 106 QEKJ1CM-106Z E CAPACITOR C 107 NCS21HJ-561X C CAPACITOR C 108 QEKJ1EM-475Z E CAPACITOR 4.7MF 20% 25V R 110 NRSA63J-272X MG RESISTOR C 109 QEKJ1EM-475Z E CAPACITOR 4.7MF 20% 25V R 111 NRSA63J-363X MG RESISTOR C 110 NCB21HK-682X C CAPACITOR R 112 NRSA63J-222X MG RESISTOR C 111 NCB21HK-152X C CAPACITOR R 116 NRSA63J-102X MG RESISTOR C 113 NCB21HK-393X C CAPACITOR R 121 NRSA63J-153X MG RESISTOR C 121 NCS21HJ-331X C CAPACITOR R 122 NRSA63J-102X MG RESISTOR C 201 NCS21HJ-821X C CAPACITOR R 201 NRSA63J-220X MG RESISTOR C 202 NCS21HJ-221X C CAPACITOR R 202 NRSA63J-182X MG RESISTOR C 203 QEKJ0JM-227Z E CAPACITOR R 203 NRSA63J-242X MG RESISTOR C 204 NCB21HK-333X C CAPACITOR R 204 NRSA63J-122X MG RESISTOR C 205 NCB21HK-222X C CAPACITOR R 205 NRSA63J-104X MG RESISTOR C 206 QEKJ1CM-106Z E CAPACITOR R 206 NRSA63J-332X MG RESISTOR C 207 NCS21HJ-561X C CAPACITOR R 207 NRSA63J-123X MG RESISTOR C 208 QEKJ1EM-475Z E CAPACITOR 4.7MF 20% 25V R 208 NRSA63J-562X MG RESISTOR C 209 QEKJ1EM-475Z E CAPACITOR 4.7MF 20% 25V R 209 NRSA63J-102X MG RESISTOR C 210 NCB21HK-682X C CAPACITOR R 210 NRSA63J-272X MG RESISTOR C 211 NCB21HK-152X C CAPACITOR R 211 NRSA63J-363X MG RESISTOR C 213 NCB21HK-393X C CAPACITOR R 212 NRSA63J-222X MG RESISTOR C 221 NCS21HJ-331X C CAPACITOR R 216 NRSA63J-102X MG RESISTOR C 301 QEKJ1AM-107Z E CAPACITOR R 221 NRSA63J-153X MG RESISTOR C 302 NCB21HK-393X C CAPACITOR R 222 NRSA63J-102X MG RESISTOR C 303 QEKJ0JM-227Z E CAPACITOR 220MF 20% 6.3V R 301 NRS181J-221X MG RESISTOR C 304 QEKJ1CM-226Z E CAPACITOR 22MF 20% 16V R 303 NRSA63J-393X MG RESISTOR C 305 QEKJ1CM-226Z E CAPACITOR 22MF 20% 16V R 304 NRS181J-101X MG RESISTOR C 306 QEKJ1CM-226Z E CAPACITOR 22MF 20% 16V R 310 QRJ146J-4R7X UNF C RESISTOR C 307 NCB21HK-103X C CAPACITOR R 313 NRSA63J-2R2X MG RESISTOR 220MF 20% 6.3V 10MF 20% 16V 100MF 20% 10V Remarks Parts name R 103 4.7 5% 1/4W C 308 NCB21HK-152X C CAPACITOR R 314 NRSA63J-153X MG RESISTOR C 310 NCB21HK-223X C CAPACITOR R 315 NRSA63J-101X MG RESISTOR C 313 QEKJ1AM-107Z E CAPACITOR 100MF 20% 10V R 327 NRSA63J-474X MG RESISTOR C 314 QCZ0202-155Z ML C CAPACITOR 1.5MF R 335 NRSA63J-152X MG RESISTOR C 316 QFG32AJ-223Z PP CAPACITOR .022MF 5% 100V R 336 NRSA63J-472X MG RESISTOR C 319 QFLM1HJ-472Z M CAPACITOR 4700PF 5% 50V R 337 NRSA63J-332X MG RESISTOR C 331 QEKJ1CM-476Z E CAPACITOR 47MF 20% 16V R 338 NRSA63J-392X MG RESISTOR C 371 QEKJ1EM-475Z E CAPACITOR 4.7MF 20% 25V R 339 NRSA63J-222X MG RESISTOR C 374 QEKJ1AM-107Z E CAPACITOR 100MF 20% 10V R 340 NRS181J-391X MG RESISTOR C 376 NCB21HK-103X C CAPACITOR R 341 NRSA63J-123X MG RESISTOR CN 31 QGF1205F1-06 CONNECTOR PRI/HEAD R 342 NRSA63J-203X MG RESISTOR CN 32 QGB2011M1-10 B TO B CONNECTO PRI/MECHA R 343 NRSA63J-183X MG RESISTOR CN 33 QGF1205F1-09 CONNECTOR PRI/MICON R 353 QRJ146J-100X UNF C RESISTOR CN 34 QGF1201F3-10 CONNECTOR PRI/AMP R 371 NRSA63J-123X MG RESISTOR D 375 MA3051/M/-X Z DIODE R 372 NRSA63J-102X MG RESISTOR FW 31 QUM024-06A2Z3 PARA RIBON WIRE R 375 NRSA02J-151X MG RESISTOR IC 31 BA3126N IC HEAD SW R 376 NRSA63J-472X MG RESISTOR IC 32 AN7317 IC PB&REC VR 31 QVP0008-203Z SEMI V RESISTOR BIAS ADJ IC 33 BU4094BCF-X IC VR 37 QVP0008-103Z SEMI V RESISTOR TAPE SPEED ADJ L 301 QQR1292-001 BIAS COIL L 303 QQL244K-100Z INDUCTOR A 10 5% 1/4W 1/8W Electrical parts list (Cassette switch board) A Item Parts number Parts name Block No. 08 Remarks Q 302 KTC3203/Y/-T TRANSISTOR OSC Q 305 KTC3203/Y/-T TRANSISTOR SW CN 1 QGB2011L1-10 B TO B CONNECTO Q 321 UN2213-X TRANSISTOR BUFFER D 1 1T3-T2 SI DIODE Q 371 KTA1271/OY/-T TRANSISTOR MOTER+B IC 1 SG-105F3-BB,C PHOTO SENSER Q 372 UN2212-X TRANSISTOR P 1 QNZ0104-001 POST PIN Q 375 2SB562/C/-T TRANSISTOR SW 1 QSW0832-001 LEAF SWITCH R.REC Q 376 2SD601A/QR/-X TRANSISTOR SW 2 QSW0832-001 LEAF SWITCH TAPE R 101 NRSA63J-220X MG RESISTOR SW 5 QSW0832-001 LEAF SWITCH F.REC R 102 NRSA63J-182X MG RESISTOR SW 6 QSW0859-001 LEVER SWITCH SOLENOID DRIVE Digitized in Heiloo Netherlands Area Area www.freeservicemanuals.info 3/29/2018 HX-Z1R < MEMO > Digitized in Heiloo Netherlands 3-23 www.freeservicemanuals.info HX-Z1R 3/29/2018 Packing materials and accessories parts list Block No. M 3 M M Block No. M 5 M M B/E/EN version P2 1/2 A9 P6 P9 A1~A8 1/2 P9 2/2 P7 P7 P4 P8 P8 2/2 P2 P10 P10 1/2 2/2 P5 P3 1/2 P3 2/2 P11 SP-HXZ1R CA-HXZ1R 3-24 P1 Digitized in Heiloo Netherlands www.freeservicemanuals.info 3/29/2018 HX-Z1R Parts list (Packing) B/E/EN version A Item Parts number Parts name Block No. M3MM Description Q'ty P 1 GV20181-001A PACKING CASE 1 CA-HXZ1R P 2 GV10118-001A TOP CUSHION 1 CA-HXZ1R P 3 GV10119-001A BOTTOM CUSHION 1 CA-HXZ1R P 4 QPC06507015P POLY BAG 1 CA-HXZ1R P 5 GV40168-007A SHEET 1 CA-HXZ1R P 6 QPC02503515P POLY BAG 1 CA-HXZ1R P 7 138764501088 MIRROR MAT 2 SP-HXZ1R P 8 138737001089 POLY BAG 2 SP-HXZ1R P 9 139764981066 TOP CUSHION 1 SP-HXZ1R P 10 139764981067 BOTTOM CUSHION 1 SP-HXZ1R P 11 140774991314 PACKING CASE 1 SP-HXZ1R Parts list (Accessories) B/E/EN version A Item Parts number Parts name Area Block No. M5MM Description Q'ty Area GVT0077-006A I.B.(CA-MXZ1R) 1 GER,FRE,DUT E GVT0077-008A I.B.(CA-MXZ1R) 1 ENG B GVT0077-007A I.B.(CA-MXZ1R) 1 SWE,FIN,DAN,GER, FRE,SPA,ITA EN A 2 GV40325-006A NOTICE CARD 1 A 3 BT-54013-1 WARRANTY CARD 1 A 4 VNA3000-204 REGIST.CARD 1 A 5 QAL0014-001 AM LOOP ANT 1 A 6 EWP503-001 ANT.WIRE 1 A 7 RM-SHXZ3R REMOCON 1 A 8 --------------- BATTERY 2 A 9 GVT0084-002A I.B.(SP-HXZ1R) 1 A 1 Digitized in Heiloo Netherlands B ENG,GER,FRE,DUT,SPA, ITA,SWE,DAN,FIN 3-25 www.freeservicemanuals.info HX-Z1R 3/29/2018 Packing materials and accessories parts list Block No. M 4 M M EV version Block No. M 6 M M P2 1/2 P9 P6 P9 A1~A8 2/2 1/2 P7 P7 P4 P8 2/2 P8 P2 P5 2/2 P10 1/2 P10 P3 2/2 P3 1/2 P1 3-26 Digitized in Heiloo Netherlands www.freeservicemanuals.info 3/29/2018 HX-Z1R Parts list (Packing) EV version A Item Parts number Block No. M4MM Parts name Description Q'ty P 1 GV20176-002A PACKING CASE 1 P 2 GV10118-001A TOP CUSHION 1 P 3 GV10119-001A BOTTOM CUSHION 1 P 4 QPC06507015P POLY BAG 1 P 5 GV40168-007A SHEET 1 P 6 QPC02503515P POLY BAG 1 P 7 138764501088 MIRROR MAT 2 FOR SPEAKER P 8 138737001089 POLY BAG 2 FOR SPEAKER P 9 139764931064 TOP CUSHION 1 FOR SPEAKER P 10 139764931065 BOTTOM CUSHION 1 FOR SPEAKER Parts list (Accessories) EV version A Item Parts number Parts name Area Block No. M6MM Description Q'ty A 1 GVT0077-009A INST.BOOK 1 CZE,POL,HUN,RUS A 2 GV40325-009A NOTICE CARD 1 A 3 BT-54013-1 WARRANTY CARD 1 A 5 QAL0014-001 AM LOOP ANT 1 A 6 EWP503-001 ANT.WIRE 1 A 7 RM-SHXZ3R REMOCON 1 A 8 --------------- BATTERY 2 Digitized in Heiloo Netherlands Area 3-27 www.freeservicemanuals.info 3/29/2018 HX-Z1R Block diagram LED MATRIX CN216 SW SWL SWR TX H.P. OUT CN206 FMH-037-2 IC571 SWOUT AHB CONTROL SPEAKER OUT J1001 OUTL,OUTR FW711 MCS MCLK MRDY MSTAT KCMD /RESET J81 B IC501 IC502 HARMONIC GENERATOR TUDATA TUST TUCK MPX CN701 L MAINL MAINR TUL,TUR IC602 POWER AMP IC701 POWER AMP VCD5V +9V REG +9V REG IC305 for A,E,UY,U,UT Only IC303 +8VREG TX OUTL OUTR IC360 +5VREG FMH-038-3 MIC IN LMUP LMDOWN RMUP RMDOWN M R C ECHO1 ECHO2 AUXL AUXR J411 J426 AUX IN AUX OUT DIGITAL OUT Digitized inD Heiloo Netherlands E F IC901 ECHO IC902 MIC AMP J1022 M MAINL MAINR J1021 1SSW -3SSW 1MSW -3MSW IC851 IC852 L MOTOR R MOTOR DRIVER DRIVER J1003 CN854 A CN804 VMW1378A IC434 FUNCTION /VOLUME CONTROL FW912 VMW1378B SW1 -SW6 IC240 +12VREG PBL,PBR IC651 DSP CAM4-7 FW202 FW204 -30V REG CN922 CN855 1 CN805 LCAM RCAM CAM0-3 TRD FOD ECM ECS TVD ONLY FOR U FMB-032-4 CN870 CN301 FMN-014 AC INPUT S500 T001 CN207 SM+,SM- IC801 FCS/SP/FE/TR BTL DRIVER CN231,2 SPINDLE M FM+,FM- T002 CN212,3 CN206 CN311 REST /RESET STAT /DMUTE SUBQ SQCK BLKCK MLD MDATA MCLK FLAG IREFx4 +5V REG CN860 /RESET MCS MCLK MRDY MSTAT KCMD KEY MATRIX CN217 T+,TF+,F- OFT TBAL BDO FBAL ARF FE,TE RFENV GCTL RFDET IC251 UNIT MICOM RDDA RDCL CN661 IC601 RF & SERVO AMP CN11 A,C, B,D E,F LD,MD 2 M IC3 RDS FM OUT STEREO,CK CE,DATA CN651 CN601 CN001 CD PICKUP AMRF AFC AMOSC ONLY FOR B/E/EN/EV LOUT ROUT CN1 IC2 PLL MUTE/IFOUT IC1 FM/AM SQIN FMDET ST/MONO AM DET AMOSC FMH-038-1 (U) FW221 OSCOUT J1 L1 AM RF & OSC FEED CN44 SQL,KEY1,PLAY,PHOTO FMH-037-1 (J & E) MAIN VOLUME ECD FMC-029-01 STTA SDATA SCK CN34 SOLENOLIDE DRIVE CN32 TU1 FM RF 3 IC33 PORT EXTENSION MOTOR DRIVE SOUND MODE FL1 FL2 IFOUT FMA-006 FM/AM ANT MS,PBL,PBR RECL,RECR CN890 FW31 CN1 REEL PULSE IC32 PB/REC AMP RSEARCH FSEARCH VOL-,VOL+ SM-,SM+ KEY21 KEY31 KEY22 IC810 SYSTEM MICOM PHOTO PLAY,KEY1 SAFETY1 SCK,SDATA STTA CN43 CN31 L+,LR+,R- M 4 IC31 HEAD SWITCH CN33 LVA10166-A1 SEARCH KNOB FL801 CN880 IC811 PORT EXT 5 R/P HEAD FMB-032-2 FMB-032-1 G MIC IN 2-1 SLCCE CK A 1K B ECON FL1 DZ4.3BSB-T2 C889 D833 BU2092 INH C VOLDA D810 Q875 10K R805 RSEARCH 10K 47 R883 R802 KEY21 SPIA KEY31 R929 1 Digitized D in Heiloo Netherlands 2-2 E SPIC KEY22 R950 S948 F S947 EXTCK S921 RESET R806 0.33MY C823 HP 4.7/50 KRC102M-T DZ6.2BSC-T2 DZ6.2BSC-T2 D815 D816 10K KTA1267/YG/-T Q916 KRC102M-T Q917 QGF1210G1-09 CN43 Parts are safety assurance parts. When replacing those parts make sure to use the specified one. G S922 S928 1K S946 1.2K AUXMUTE 1.5K 1K 2.2K 1K 2.7K SPIB VOLDA 3.9K R974 1K R920 2.7K R946 VOL+ S927 5.6K R845 TUCE VOL- 10K SLCCE R928 1K R921 R873 200 CD3L CD2L CD1L DCLUBL HALL 0.01 C962 0.01 0.01 C963 C961 0.01 0.01 C960 C959 0.01 C958 D951 D973 L-192ZSRD-T L-192ZSRD-T L-192ZSRD-T L-192ZSRD-T L-192ZSRD-T Q962 17P 18P KRC102M-T RSEARCH FSEARCH VOLLED SM- SM+ S920 S949 S923 S924 S925 S926 LC503MUR1-30Q D950 D948 D947 D946 D972 LC503MUR1-30Q 200 R960 200 R959 200 R958 200 R957 200 R956 JS962 QSW0862-001 R922 SMUTE JS960 QSW0983-001 R923 EXTDA R924 1K R925 R976 R926 1K JS958 QSW0984-001 R927 R872 3.9K REMIN R947 1K OEEXT R948 EXTCK L-192ZSRD-T EXTCE 5.6K 1K 10K R949 R975 200 100K 100K 100K 100K R936 R937 R938 R939 R933 6G 7G 8G 9G 10G G16 P18 10G 11G P15 100 R963 P10 G1 1G G12 12G G13 13G G14 14G G15 15G G16 16G P2 2P P3 3P P4 4P P5 5P P6 6P P8 8P 10P 4P P11 11P P14 14P 3P 2P 1P 16G 15G 14G 13G 12G 15P 18P 7G 9G 8G 6G 5G 100K R816 100K R821 100K R822 100K R823 100K R824 100K R825 100K R826 100K R830 100K R831 100K R832 100K R833 100K R834 100K R835 100K R836 100K R837 100K R842 100K R853 R852 R919 2SD1991A/RS/-T Q810 2SD1991A/RS/-T Q811 2SD1991A/RS/-T Q812 2SD1991A/RS/-T Q813 2SD1991A/RS/-T Q814 Q815 2SD1991A/RS/-T 2SD1991A/RS/-T Q816 2SD1991A/RS/-T Q817 2SD1991A/RS/-T Q818 Q819 2SD1991A/RS/-T 2SD1991A/RS/-T Q820 2SD1991A/RS/-T Q821 2SD1991A/RS/-T Q822 2SD1991A/RS/-T Q823 Q858 2SD1991A/RS/-T 2SD1991A/RS/-T Q879 2SD1991A/RS/-T Q890 100K 100K 100K 100K R930 G14 100K R932 R931 11G G13 100K 100K 100K G12 3G 4G 100K 5G 100K R980 R934 R935 3G 4G QQL231K-220Y CN890 1K L-192ZSRD-T 100K R940 2G QQL244K-100Z QGF1205F1-13 R839 C817 CN880 R871 R955 100K R981 G1 100K R878 21P 100K 100K R879 R880 20P 19P S944 QGF1210G1-13 BUZZER R953 VOLLED D945 13K 13K R890 P18 L806 D943 RDSCK 200 FSEARCH 200 13K 100K R891 17P 100K 100K R992 R985 13P 16P R984 12P P15 13K 100K R991 P11 R983 13K R989 P10 R990 100K 9P P14 13K R988 R994 P8 R993 7P R904 2.2K CP1 POPL 1K L-192ZSRD-T R954 13K R986 R844 13K R982 P4 P5 P6 G15 L801 2G 1G 13K R868 R877 R918 100K 100K 13K 13K R987 1P S904 L-192ZSRD-T 220 200 RSEARCH 1K 1K R952 1K L-192ZSRD-T R861 1K D942 R978 CLASSICL 20P R913 21P D903 R854 SML MSTAT STADIUML 19P OEEXT R855 10K VC3RESET 200 15P L-192ZSRD-T 10K D944 10P EXTCE 14P R912 16P D902 13P BASSL C820 L807 11P EXTDA 1.5MY ROCKL 1 200 UPD784975AGF301 QQL231K-220Y 12P L-192ZSRD-T 1K R911 9P D901 1K EXTCK RECL 1K IC810 TUCE FSEARCH 10K 1K R973 R827 220 R882 1K 1K R850 R972 15K 1K 1K R851 R838 R849 1K 1K R894 R893 KCMND SPIC SPIB SPIA PRT ECON RELAY VOLCK VOLDA INH RESET 1K R860 10K 220 1K KEY2 10K RECL 1K 8P 10K EXTDA 1K R897 IC811 1K 10K R910 7P R859 R896 C837 1K R892 AUXMUTE 5P 1K KEY1 D805 R886 220 R813 10K EXTCE R899 CD2L 10K CD3L 10K CD1L R970 DGND R841 100/10 SML R971 OEEXT BASSL 10K QQR0621-001Z CLASSICL SPIC HALL SPIB STADIUML R917 DCLUBL RESET L812 0.01 RELAY 0.01 TUCE POPL D832 PBMUTE C832 ROCKL R847 1K DZ5.1BSB-T2 VCC CK 1K R870 R895 VOLCK R869 R862 CK R867 PHOTO R874 MA700A-T2 D806 SLCKEY R875 KCMND 1K SPIA D807 1K R866 SM+ VC3RESET 1K R819 ECHO1 R843 R865 R820 SLCPLAY ECHO2 MSI KEY3 VOL- VOL+ C831 L803 1K R858 R857 DZ5.1BSB-T2 SPIDTI R856 1K HP 1K MPX MSI R863 R998 R846 0.01 SM- C821 INH R810 D831 27P DATA C808 10K C902 R881 VPP 10K POUT 30P MPX R818 1SS119-041-T2 1 ICP-N15 1K FL2 220/6.3 5.6K R807 KRA111M-T 2.7K R905 L805 22k -30V 3.9K R906 G1 2G 3G 4G 5G 6G 7G 8G 9G 10G 11G G12 G13 G14 G15 G16 1P P2 P3 P4 P5 P6 7P P8 9P P10 P11 12P 13P P14 P15 16P 17P P18 19P 20P 21P 1.5K R903 1.2K R943 1.2K R902 1K R942 1K R941 1K R901 HX-Z1R R916 Q833 C805 SM- 0.001 C809 PHOTO SM+ 0.001 10K D804 C901 100K KEY3 10K SPIDTI 10K SLCKEY 10K R808 R812 10K R817 PRT R815 KEY1 KEY2 R829 C825 10K R828 C801 10K PBMUTE SMUTE L802 PHOTO R884 R811 10K 0.01MY QQR0621-001Z R814 L813 QQL244K-100Z R840 MSTAT C803 X801 QQL29BJ-100Z P3 QAN0045-001 P2 R909 10K 220/6.3 16K R907 S906 QAX0724-001Z VSS 220/6.3 VDD C804 REMIN 330 BZ801 R885 DATA L872 RESET R801 S945 0.001 ECHO1/RDSDA C806 100 C838 ECHO2/RDSCK 1.5K R944 C836 10/25 S901 SLCPLAY 2 S943 QQR0621-001Z 3 S942 C903 220 R945 4.7K 2.2K C835 S941 0.001 R889 D962 C840 220 1000p S900 100/6.3 R888 KTA1267/YG/-T Q961 R962 S940 10K D803 R969 4.7K L-192ZSRD-T D802 R848 R961 R908 D801 220 330 IC951 MA700A-T2 CN990 QGF1210G1-07 5 10K R887 R876 CN860 QGF1210G1-24 GP1UM271XK SLCKEY DATA FW221 4 QUM156-13DGZ4 www.freeservicemanuals.info HX-Z1R 3/29/2018 Standard schematic diagrams Front circuit R900 1K QLF0096-001 FL801 S902 S903 QQL244K-100Z C815 22/50 22/50 L815 QQR0621-001Z S905 6P www.freeservicemanuals.info 3/29/2018 HX-Z1R Main circuit Q545 KRA102M-T CN870 QGF1205F1-24 10k R546 HPMUTE PRT TUCE PBMUTE SPIC POUT RELAY VOLDA SPIB VOLCK KCMND R545 33K CK VC3RESET MSTAT SPIDTI 10/25 MSI2 56 MPX D426 C426 SMUTE D.OUT R426 C427 D545 GP1FA550TZ SPIA J426 DZ5.1BSB-T2 0.022 R401 CN11 RECL 1K R402 220P C402 RECR 1K 0.022 C407 R408 9.1K R409 0.01 C408 9.1K QGF1205F1-13/09 5 C401 220P MSI C403 TUCE 0.01 CK R460 PBMUTE R407 2.7k MPX QQR1277-001Z R533 DZ5.1BSB-T2 100/10 C533 D409 L533 TUL TUR R588 R587 R585 100 C576 C406 R406 22k R538 220 100 B4007 2SC2785/FE/-T 47/50 33P 0.0018 47/63 C534 D571 100 C539 C538 Q533 C570 R570 47/16 R583 MSI2 2.2M C585 Q402 R582 C404 R535 1K 4.7k 47/16 47K PBR R404 D414 R534 100K D413 QRZ9006-4R7X C405 4.7k 2200P 22k R405 R403 2SC3576-JVC-T CN44 QGF1201F3-10 Q401 D412 Q571 C416 P1 100/6.3 PBL D411 C419 C409 1k 2SC3576-JVC-T MSI 2SC2785/FE/-T 0.015 220p R413 12k 220p R414 12k CN504 QGF1016C1-15 22 R537 680P C537 D535 2SC2785/FE/-T R536 1/50 C536 1K C588 R589 270 C577 220/16 C411 C412 Q572 C571 R571 D572 AUXL 2.2/50 IC571 220k R411 36k Q534 BA15218 R576 C415 0.0022 4 100k 100K R580 R581 2SC2785/FE/-T R417 100k C587 47k C525 L523 QQR1277-001Z L524 0.022 100p R419 220p C413 QNN0420-001 R572 C575 KRA102M-T 2.2k 200 J411 47k Q413 RECL R415 R575 R577 2SC3576-JVC-T R579 AUXR 1/50 36k C578 47/16 R412 10k Q411 R421 QQR1277-001Z 22k 220p C414 Q573 R420 Q412 AUXMUTE L525 2SC2785/FE/-T QQR1277-001Z 10k R416 R418 R410 RECR CDL C523 22k R528 1K 2.2k 200 DZ6.8BSC-T2 D523 2SC3576-JVC-T CDR 1.5 1K C528 0.01 R523 1000/6.3 11K R573 CN661 DZ6.8BSC-T2 C529 C527 D524 QGF1036F1-19 R529 100K C524 JA524 C551 L526 QNN0017-002 470/10 L551 220/10 QQR1277-001Z QQR1277-001Z C552 0.1 C553 0.01 R553 R554 SPIC VOLDA VOLCK SPIB SPIA CDL CDR TUL P3 CDL 10/25 C555 SW 0.01 4.7k Q495 R446 C557 3.9k R495 0.1 R447 2SC3576-JVC-T 10/50 C480 10/35 R477 MAINL C479 R493 47/16 R442 C478 9.1k 0.22 R440 C482 C484 C486 R482 Q493 R443 2SC3576-JVC-T C477 10/35 STEPC INLA INRA INLB INRB INLD 10K R444 MAINR OUTL C476 10/35 RECL VCC R445 D448 R494 10K ALCR OUTR R481 R435 68k 10k 1k C475 C436 RECR C474 470/10 RECR 5V.VCD 0.39 C473 R496 C437 VFC1 PRT 2SC3576-JVC-T KRA102M-T CAP 10/25 QGD2503F1-05 Q494 Q496 C497 10/25 1/50 C435 RECL CN922 POUT 10k 10K R480 INLC KCMND INRC R560 C488 P.ON MSTAT INRD R558 R559 10k R478 1.2K C481 10/35 10/25 10/25 10/25 C483 R556 C485 C487 2.2/50 2.2/50 VC3RESET R555 10/25 100k D.OUT CN311 R552 QGB2510J1-11/14 11k C563 C556 C564 3 SPIDTI 4.7k TUR AUXR R551 11k AUXL PBR CDR 10/25 PBL C554 FILTER 0.1 P.ON R497 10K 220/25 R450 C489 C438 SMUTE 120k C472 VFC2 C471 0.1 C439 MIC BH3874AKS2 2.2/50 100 C470 0.1 R452 C442 10/25 C501 R501 HPFR2 100k HPMUTE 100k 4.7/50 0.022 R505 R506 22K 22K C467 PS1 HPFR1 PS2 HPFL3 R456 0.1 R455 C446 RELAY 0.22 150k C468 C445 C503 R502 R454 R453 56k 0.027 0.1 HPFR3 C444 10/25 C508 BASS1 D502 C469 B4014 ECHO2 D501 51k C441 0.0068 R438 R451 ECHO1 0.015 6.8k 0.1 IC434 CN217 R437 QGB2510J1-07 0.047 R436 C502 2 150k 56k HPFL1 0.0082 82k R510 270k C514 C558 R513 30k 56K 0.01 R514 8.2k R512 C462 0.01 R515 110K 100k C460 0.022 R504 C458 0.022 100 C456 R509 0.1 C509 100/10 C454 0.1 30k C504 C452 C510 R503 R507 0.01 R508 C461 0.01 0.0022 C459 0.022 0.0022 C457 0.022 C505 0.22 C455 0.1 0.27 C450 0.1 C453 C463 0.22 C451 C464 C449 100k R511 F5L F4R2 F4R1 F4L2 F4L1 F3R2 F3R1 F3L2 F3L1 F2R2 F2R1 F2L2 F2L1 F1R1 F1R2 C465 P2 NJM4580D 0.022 FIL2 0.22 IC502 HPFL2 IC501 C448 NJM4580D C466 FIL1 0.22 F5R C447 0.01 C559 1 C560 0.01 CD SIGNAL AUX SIGNAL MAIN SIGNAL 0.022 Parts are safety assurance parts. When replacing those parts make sure to use the specified one. A B C Digitized inDHeiloo Netherlands E F TAPE P. B. SIGNAL FM/TUNER SIGNAL G 2-3 A 1 B C MAIN SIGNAL Digitized D in Heiloo Netherlands 2-4 E D203 R371 330 CN301 F R739 82K 100K R740 D221 Q371 Q370 KTC2026/OY/ 2SD1991A/RS/-T R377 10K 330 R370 Q305 KTC2026/Y/ B6006 KIA7809API IC305 R305 KIA7808API IC303 D201 IC360 KIA7805API QNZ0136-001Z EP201 Parts are safety assurance parts. When replacing those parts make sure to use the specified one. G D728 1SS133-T2 2SC2785/FE/-T Q727 47/16 KTC3200/GL/-T 10K 10 100K 56K 47 47 R702 100/10 C723 2.2K R769 100K R768 KTA1268/GL/-T Q712 0.1 C712 0.1 2SA1175/FE/-T R729 1k R701 C722 C711 R778 C729 4.7p 10K R777 10K Q710 KTA1023/OY/-T R787 C654 10/25 R730 0.022 R762 C726 C710 470p C721 47/63 C703 IC701 820 C708 56k 56k C621 100K R727 C714 0.047 R704 R703 Q713 KTC1027/OY/-T R706 0.047 Q702 C716 1K 0.39 4.7K C730 L702 220P 10 220P R714 33k R766 C706 10K 1K R718 1K R717 10 R774 C705 R722 KTA1268/GL/-T 0.022 R761 1SS119-041-T2 1K D720 1SS119-041-T2 R707 R720 5.6K Q701 D719 R754 0.22 0.22 R753 DZ15BSC-T2 DZ15BSC-T2 0.0022 KTA1268/GL/-T 10 R719 R715 10K R721 0.39 4.7p KTA1268/GL/-T B6019 R713 10 56K L701 C731 5.6K C713 0.047 C709 QGB2510K2-14 C715 D724 DZ36BSA-T2 Q734 0.047 47/63 2SC3576-JVC-T 10/50 C370 R742 4.7K DZ10BSC-T2 100/6.3V C707 R723 R724 D704 DZ8.2BSC-T2 10k C312 330 DZ11BSC-T2 R304 R372 D315 1.2K 10/50 R374 DZ11BSC-T2 R373 680 D313 200 10/50 R705 820 R608 C362 R375 R741 Q612 D362 200 DZ6.8BSC-T2 R376 D370 Q690 D315 Q201 KTA1273/Y/-T DZ10BSC-T2 3 0.01 1SS119-041-T2 D227 1N4003S-T5 KTC3199/GL R680 C371 Q735 D316 R735 Q372 Q733 22/50V 2SC3576-JVC-T DZ4.3BSB-T2 R733 C372 4.7K C313 2SC3576-JVC-T 0.01 R734 D703 C312 C311 10k 10/35 R668 Q736 10/50 C311 2SC3576-JVC-T 10/50 D723 C651 DZ36BSA-T2 R736 100K 0.0022 R726 0.0022 Q737 KRA111M-T R725 0.1 82K C652 CN215 0.1 820 4.7K C734 820 C732 R650 R640 0.1 QGB2510K2-15 10K R639 C735 D371 100/35 Q373 KRA102M-T CN205 J81 QGB2510J1-15 D650 R651 1SS119-041-T2 0.0022 R638 C733 R637 D725 R732 1SS119-041-T2 C736 RY1 R738 R731 QSK0109-001 R737 C606 220P 22K C737 R204 RY2 QSK0109-001 QNB0107-001 DZ6.8BSC-T2 0.01 10K R690 10k R667 R655 0.22 C740 D372 Q374 KRC102M-T C220 C219 22/50 220 R618 KRC102M-T IC602 C308 STBY C307 1SS119-041-T2 C205 D218 DZ33BSC-T2 D620 1SS119-041-T2 10 Q613 R654 0.22 0.22 R653 R652 0.22 C741 1K D204 7.5K 1N4003S-T5 R362 D202 2.2K 0.022 D219 C216 R620 C602 10P 22/50 R203 C610 0.022 C217 Q602 C601 10P C218 10K R674 100 R601 47/50 C611 10/50 R602 47K R216 D217 47( 1/4W) KTA1268/GL/-T 0.39 L602 R614 10 C609 0.1 B6008 R202 1N4003S-T5 10 0.1 R623 R616 C202 C614 0.047 56K 47K C616 C624 D622 C204 0.047 C623 10/50 DZ9.1BSB-T2 R215 D220 4.7/50 IC240 DZ9.1BSB-T2 KIA7812API C215 C222 47/63 47/50 HX-Z1R D360 1SS199-041-T2 D213 4.7/50 1SS119-041-T2 27K 1.2K R607 0.082 R218 C221 C612 R666 33k 100 100K R205 C608 220 R617 56k R603 220p C603 220P 0.1 C201 D214 C203 D212 D211 C211 R606 D619 Q601 1SS119-041-T2 56k R604 220p C604 470P C618 C605 C213 0.082 10K 2.2K 10 R619 R615 KTA1268/GL/-T 0.39 L601 10 R613 56K C214 0.047 R621 C613 0.047 C615 10/35V 10/50 2K 1/50 C639 1k D240 DZ13BSB-T2 2K R263 47/63 C607 10/35V C240 2K R261 1.2K R605 C622 STBY 1SS119-041-T2 2K R260 R262 R676 C241 10 R240 1SS119-041-T2 D263 D262 1SS119-041-T2 D261 1k 27K R217 DZ5.1BSB-T2 D265 Q260 KTC3203/OY/-T D264 B6020 D266 D260 1SS119-041-T2 CN207 QGB2510K2-07 4 47/25 C260 4.7K CN206 QGA2501F1-02 R675 0.082 C212 KTC3203/OY/-T Q682 10K R265 10K R683 5 3300/25 FW204 2 QJK015-051014 R682 C236 FW202 QUM157-07DGZ4 www.freeservicemanuals.info HX-Z1R 3/29/2018 Power amplifier & Power supply circuit C653 QGD2504F1-04Z CN701 0.1 10K R786 KTC3200/GL/-T Q711 D726 1SS119-041-T2 10K R775 R708 R716 C739 1/50 R728 Q726 Q728 10K www.freeservicemanuals.info 3/29/2018 HX-Z1R 1K CAM5 R881 1K CAM6 R880 1K CAM7 1SSW 2SSW 3SSW 3MSW 2MSW 1MSW TP10 TP7 R258 R882 22K CAM4 R290 1K LB1641 R811 5 R883 TP8 IC852 1K IC851 LB1641 1K CAM3 1K 1K 1K CAM2 R884 R288 CAM1 1K R289 CAM0 1K R885 R265 1K R886 10k R887 TP9 CD control circuit R871 22K R872 22K R873 22K R876 22K R875 22K R874 22K R281 LM+ 22K 22K 22K 22K 22K 22K 22K R891 R892 R893 R894 R895 10k R278 1/16 22K 0.01 C854 0.01 M851 MSN-5D257A NI R890 1K R855 C859 R889 R280 C853 CN855 QGG2002M4-10 CN805 LM- R888 1K B6033 B6031 C855 C852 B6032 CAM7 SUBQ CAM6 CAM5 R656 SQCK CAM4 1/16 1K KCMND RMDOWN MSTAT RM- RMUP RM+ LM- LMDOWN RM+ LMUP MSN-5D257A LM+ CN854 QGB2016K1-07 CN804 M852 KCLK 0.1/25 10/16 D851 DZ5.6BSB-T2 C860 SW1 SW2 RM- CAM3 IC251 R256 CAM2 1K MCS CAM1 UPD780024A-B76 SW3 R861 1K 1SSW R862 1K 2SSW R863 1K 3SSW CAM0 RMDOWN R277 SW4 SW5 R866 1K 3MSW R865 1K 2MSW R864 1K 1MSW 1K 1K R854 RMUP R852 LMDOWN LMUP TP6 R276 1K 1K TP5 R275 1K 1K R853 TP4 R274 1K 1K R851 Q842 SW6 NI TP3 R842 270k 39k R606 62k R608 0 1K 2.2K R657 /P.ON MLD R260 R658 MDATA 1K R659 MCLK 1K R655 DMUTE /RST MRDY P.ON STAT R254 X251 QAX0720-001Z R264 R263 1K GCTRL 1K LDON 470p C605 R603 39k 22K FBAL FE IC602 BA15218F-XE R605 NI 22K TBAL 22K 470k R602 R262 CN851 NI R601 R607 R261 4 22K 4.7K C253 C254 47/10 0.1/25 C607 NI R604 270k C604 0.022 10K C606 C603 0.022 CROSS 10K R626 KCMND R627 82p TE MRDY R641 82K 15k KCLK R257 1K MCS R253 1K R284 1K 220/10 C657 0.1/25 C655 C633 R654 QGF1016F3-16 C658 CN601 QGF1016F1-16 100 MCLK MDATA MLD SQCK SUBQ STAT 1K VDET R653 /RST 0.0022 1K 0.0022 R642 560K C602 1K C601 C641 0.047 R652 C642 4700p C608 D R651 A B DMUTE 1200p C 1K MSTAT C625 R614 E R255 0.1uF F LOUT 0.1/25 0.022 C653 0.1/25 4.7k D R618 4.7k R619 4.7k B R620 4.7k C R622 22k F C621 TP2 A QGF1016F3-19 CN651 R621 E AN22000A 3 22k IC601 1 ROUT R623 TRV /RFDET TVD C622 ECM OUTR IC651 TRD NI FOD NI CN652 0.01 R616 C616 C614 R631 2.2 R690 0 ECS KICK R628 1.5M R635 F- C615 120 1/16 T- 0.047 OFT 1/16 C623 C632 T+ 0.0047 0.027 R633 NI 91 F+ 1/50 C612 C624 C617 330P OUTL MN35510AL 0.1/25 100/6.3 R636 FBAL RFENV C611 W601 0.22 C613 10 FE C631 ARF C677 R632 TBAL R682 TE 10/16 RFENV C618 R610 C610 4.7k R613 R611 RSEL P.ON R294 NI R617 R686 NI R687 NI R688 NI R293 NI Q291 NI 2SA952/LK/-T /RFDET Q632 NI BDO R292 C291 10K 47/10 LDON C619 1K C676 WVEL NI SUBC RSEL OFT C620 33p SBCK 1K VDET R615 R609 4.7k 2 TP1 NI NI Q631 2SB709A/RS/-X 8.2k 12 0.027 R634 220 R666 C673 NI 220/10 BDO NI /P.ON R291 NI WVEL C822 220/10 NI R684 R665 2.7K NI R672 0.047 NI R669 100 X651 QAX0413-001Z 12P C656 0.1/25 C652 12P C669 220/10 C671 C672 C651 0.33U C668 NI C667 0.15 C665 R668 1.5M C666 NI 330 120K R663 R664 68K R662 270 NI R685 NI C821 1/16 R649 D667 NI 0.1/25 FOD R801 2.7K 4.7K SUBC R670 LA6541-X C811 R802 100/6.3 C816 NI C680 C801 0.0068 390P 390P SBCK ARF R667 4.7 R813 NI C814 470P C661 TRD KICK C664 82k 0.022 4.7k R804 C663 0.022 R803 C679 F- F+ T- T+ C802 0.0047 C815 NI R683 1.2K R812 NI R710 R691 10K R703 10K 220 OUTL IC801 R701 820 C691 390P C699 220/10 E406783-001 SM+ IC652 FMR831 1 24K R832 10K 150 R808 43K LOUT C693 0.0068 R695 FM+ 100 BA15218F-XE SME406783-001 R708 ECM ECS C695 0.047 R705 R706 2K 5.6K 9.1K TVD R806 47k TRV R707 6.8K IC652 24K R805 C694 C696 BA15218F-XE 10/16 R709 100 ROUT 0.0068 R696 390P C813 R809 1.2K 2.7K FM- FM+ 390P SM- SM+ CN801 QGA2001C1-06 QGA2001F1-06 C812 R807 ESB110-005 R702 R692 10K 820 C692 R704 390P 10K OUTR A B C Digitized inDHeiloo Netherlands CD SIGNAL E F G 2-5 www.freeservicemanuals.info HX-Z1R 3/29/2018 HX-Z1R VKZ3174-00A Cassette amplifier circuit 1.8K SW6 QSW0859-001 SW2 SW1 2.7K SW5 R210 0.039 D1 1SR139-400-T2 SG-105F3-BB,C 1K C207 R209 2.4K 3.3K 0.033 R206 R202 C211 R212 2.2K 0.0015 R208 C208 R211 5.6K 4.7/25 36K 1K R204 1.2K CN1 QGB2011L1-10 MSI-5U2LWA 22/16 C306 10/16 C206 R222 820P 220P R203 C202 C201 IC31 C204 C213 22/16 C305 560P 22/16 C304 100K C205 22 0.0022 R205 R201 C203 5 220/6.3 IC1 BA3126N R304 100 FW31 CN32 QGB2011M1-10 1K R216 VWS304-06A13K R301 R207 AN7317 100/10 C374 4.7/25 C209 100/10 C301 IC32 C210 0.0068 CN31 LV42902-001A QGF1205F1-06 220 4 220/6.3 0.039 C303 C302 R107 10/16 1K C106 12K R371 12K R104 1.2K R111 36K VR37 QVP0008-103Z R112 C307 2.2K 0.01 Q375 2SB562/C/ Q371 KTA1271/OY/-T 0.01 C111 0.0015 C376 0.039 1K R109 C113 4.7/25 2.7K 5.6K R110 C108 560P R108 C107 39K R303 3.3K 0.0022 R105 22 100K 1.8K C105 2.4K R106 R102 220/6.3 R103 C102 R101 C103 220P R122 820P C104 0.033 C101 C110 0.0068 1K R116 C109 4.7/25 12K 1K HZM5.1NB2-X 3 R372 D375 Q376 2SC1623/5-6/-X R338 390 3.3K 330P R221 C221 15K 330P L303 QQL244K-100Z 4.7/25 C371 R340 3.3K 4.7K 150 C121 15K R376 R375 QVP0008-203Z VR31 R121 R337 Q372 UN2212-X R353 10 L301 QQR1292-001 Q302 IC33 BU4094BCF R339 2.2K R336 4.7K 470K 100 24K 18K R342 R343 C331 22/16 1.5K R335 0.022 2.2 1.5 C314 C310 100/10 C313 R313 Q321 UN2213-X 2.2 0.022 C316 15K C308 0.0015 R305 0.0047 C319 2 R314 R341 R315 12K KTC3203/Y/-T R327 Q305 KTC3203/Y/-T CN34 CN33 QGF1205F1-09 QGF1201F3-10 1 TAPE P. B. SIGNAL Parts are safety assurance parts. When replacing those parts make sure to use the specified one. A B C Digitized D in Heiloo Netherlands 2-6 E F G www.freeservicemanuals.info 3/29/2018 HX-Z1R Tuner circuit 5 TU1 QAU0160-001 C17 0.0039 C18 0.47/50 R23 1.8K C48 0.0022 C52 0.27 0 C60 R60 39k C47 1/50 R40 470P C45 10/16 C44 10/16 C43 0.0018 0.047 0.0018 C40 10/16 LA1838 L3 C16 12P Q4 DTA114YKA-X 0.047 R21 R30 C36 1/50 R70 10K R35 1.2K 1/50 C38 3.3K 0.22/50 R36 C39 C24 150P 0.001 C37 1/50 0.047 C35 5.6k 0.022 T1 QQR0793-001 C23 150P C34 R24 10K Q5 DTA114YKA-X C22 150P 1K 1K C73 0.1 22P IC3 C30 100/10 QAX0263-001Z CF3 QAX0610-001Z LC72723 3.3K R16 4.7K C11 C14 100/10 0.1 X70 R73 10K R72 10K R71 R27 R33 R14 C13 12P R28 R15 2 C70 10K 100K 10K R13 C12 0.047 1K C21 0.022 R29 L1 QQR1094-001 330 C9 47 C33 C32 0.047 R34 1K 1K 10K 5.6K R20 R19 1K R18 3 C31 R37 CF2 QAX0458-001Z 22/16 R12 R11 D4 1SS133-T2 4.7k J1 QNB0014-001 Q3 2SC2412K/R/-X 4.7k Q2 2SC2412K/R/-X 4.7 C41 10/16 LC72136N IC1 X1 3.3K QAX0402-001 IC2 1SS133-T2 D3 R39 39K C42 R41 12P C10 R38 39K R25 330 4.7K R22 C15 0.01 C4 2SC2814/4-5/-X R6 12 R2 330 CF1 QAX0420-001 0.01 C2 10/16 C1 0.022 C3 Q1 1SS133-T2 C20 1000P R26 2.2K C19 R10 2.2K 330 R4 R3 220K C25 100/10 D2 12P C50 22/16 56 1SS133-T2 D1 C58 0.047 C57 0.001 R5 4 C49 C51 1/50 C46 C55 33P L2 33 0.022 C54 C53 0.047 22/16 C56 10P R32 R17 68( 1/4W) FR C26 0.01 1K C75 10/50 C6 C7 C27 0.01 0.001 0.001 R31 C59 0.001 C71 C76 330P C74 0.1 C72 560P 22P 1K RDDA RDCL ROUT D.GND 1SS133-T2 LOUT GND 5.6V 9V STEREO CK CE DATA D11 L70 100 CN1 QGF1205F1-13 AM SIGNAL FM/TUNER SIGNAL RDS SIGNAL 1 Parts are safety assurance parts. When replacing those parts make sure to use the specified one. A B C Digitized inDHeiloo Netherlands E F G 2-7 www.freeservicemanuals.info HX-Z1R 3/29/2018 HX-Z1R Mic & Head phone circuit IC902 R1072 C1068 4.7K 0.22/50 NJM4580L D1061 1SS119-041-T2 C1065 150P R1063 390 C1035 100/10 100/10 C1062 J1021 C1021 1.5k R1064 100 QNS0170-001 C1061 4.7/50 R1065 4.7M C1063 51 R1067 560 R1070 4.7K TW802 QUB220-21DMHP 0.01U QVQ0309-B54 1000p C1022 20K R1032 20K 1000p J1022 QNS0170-001 C1039 4700P C1038 33K VR901 C1023 R1034 10K 100P C1037 0.01U R1035 R1033 R1031 4.7k 4 C1036 R1062 12K R1021 8.2K C1034 D1021 DZ5.1BSB-T2 0.1u R1071 Q1061 R1066 2SC3576-JVC-T 150P 2.2/50 330P C1064 1.5K R1074 R1069 1K 10K 20K C1066 C1067 220/10 R1061 R1068 10K R1073 4.7/50 C1069 5 R1022 0.01U 9V AGND 4.7K QUM155-17DGZ4 20K R1043 KRA111M-T 2.2/50 R1036 FW912 C1044 0.01u C1045 1K R1045 4.7K 10K R1038 R1039 22/25 C1042 2.7K 20K 5.6K KRA111M-T 220 Q1022 MIC 15K C1043 0.47u Q1023 ECHO2 ECHO1 R1037 Q1021 R1044 R1042 R1041 3 C1040 3300P C1041 0.01U KRA111M-T R1040 IC901 BU9253AS 4.7k 2 HP J1001 HPL L1002 AGND QNS0204-001 QQL231K-470Y 3900p C1002 3900p C1001 C1003 2200P TW801 QUB220-04DMHP QQL231K-470Y 1000p C1006 1000p C1005 L1003 QQR1277-001Z 1000p C1004 FW711 QUM154-33DGZ4 L1001 HPR D1003 DZ2.4BSB-T2 1 A B C Digitized D in Heiloo Netherlands 2-8 E F G www.freeservicemanuals.info 3/29/2018 HX-Z1R Power supply circuit 5 CN214 QGA3901C1-05 D234 2A02-M F103 D235 2A02-M T2AL C252 T001 F102 T5AL D236 D233 2A02-M 2A02-M F001 0.0047/250 QQT0367-002 F101 T2.5AL 4 CN250 QGD2504C1-03Z D254 1SS119-041-T2 CN213 QGD2504C1-04Z CN231 D252 QGA7901F2-02 CN212 QSK0140-001 RY3 T5AL T002 Q251 R250 3 1N4003 3.3k R253 2SC2785 Q250 0.0047 C253 QGD2504C1-03Z KTC1027/OY/-T CN232 QQT0253-002 470/16 47/50 DZ6.2BSC D256 470/6.3 C250 C251 3.3k C255 QGD2504C1-03Z 2 Parts are safety assurance parts. When replacing those parts make sure to use the specified one. 1 A B C Digitized inDHeiloo Netherlands E F G 2-9 www.freeservicemanuals.info HX-Z1R 3/29/2018 HX-Z1R Printed circuit boards Main board 5 4 3 2 1 A B C Digitized D in Heiloo Netherlands 2-10 E F G www.freeservicemanuals.info 3/29/2018 HX-Z1R Front board 5 4 3 2 1 A B C Digitized inDHeiloo Netherlands E F G 2-11 www.freeservicemanuals.info HX-Z1R 3/29/2018 HX-Z1R Power amplifier board 5 4 3 2 1 A B C Digitized D in Heiloo Netherlands 2-12 E F G www.freeservicemanuals.info 3/29/2018 HX-Z1R CD servo control board 5 4 3 2 1 A Digitized B in Heiloo Netherlands C 2-13 www.freeservicemanuals.info 3/29/2018 HX-Z1R Tuner board 5 4 3 2 1 2-14 A Digitized B in Heiloo Netherlands C www.freeservicemanuals.info 3/29/2018 HX-Z1R Head amplifier board 5 4 3 2 1 A Digitized B in Heiloo Netherlands C 2-15 www.freeservicemanuals.info 3/29/2018 HX-Z1R Traverse mechanism board (Forward side) (Reverse side) S602 MT602 5 4 S601 MT601 CN601 (Traverse mechanism board) 3 Cassette switch board 2 SW2 SW3 D1 SW1 SW4 P1 CN1 T01 SW6 IC1 1 2-16 A Digitized B in Heiloo Netherlands C SW5 ">

Public link updated
The public link to your chat has been updated.
Advertisement